A Nonionic Polyethylene Oxide (PEO) Surfactant Model: Experimental and Molecular Dynamics Studies of Kolliphor EL

Influence of Lyophilization and Cryoprotection on the Stability and Morphology of Drug-Loaded Poly(ethylene glycol-b-ε-caprolactone) Micelles

Polymeric micelles are promising carriers for the delivery of poorly water-soluble drugs, providing enhanced drug solubility, blood circulation times, and bioavailability. Nevertheless, the storage and long-term stability of micelles in solution present challenges requiring the lyophilization and storage of formulations in the solid state, with reconstitution immediately prior to application. Therefore, it is important to understand the effects of lyophilization/reconstitution on micelles, particularly their drug-loaded counterparts. Herein, we investigated the use of β-cyclodextrin (β-CD) as a cryoprotectant for the lyophilization/reconstitution of a library of poly(ethylene glycol-b-ε-caprolactone) (PEG-b-PCL) copolymer micelles and their drug-loaded counterparts, as well as the effect of the physiochemical properties of different drugs (phloretin and gossypol). The critical aggregation concentration (CAC) of the copolymers decreased with increasing weight fraction of the PCL block (f_PCL), plateauing at ~1 mg/L when the f_PCL was >0.45. The blank (empty) and drug-loaded micelles were lyophilized/reconstituted in the absence and presence of β-CD (9% w/w) and analyzed via dynamic light scattering (DLS) and synchrotron small-angle X-ray scattering (SAXS) to assess for changes in aggregate size (hydrodynamic diameter, D_h) and morphology, respectively. Regardless of the PEG-b-PCL copolymer or the use of β-CD, the blank micelles displayed poor redispersibility (<10% relative to the initial concentration), while the fraction that redispersed displayed similar D_h to the as-prepared micelles, increasing in D_h as the f_PCL of the PEG-b-PCL copolymer increased. While most blank micelles displayed discrete morphologies, the addition of β-CD or lyophilization/reconstitution generally resulted in the formation of poorly defined aggregates. Similar results were also obtained for drug-loaded micelles, with the exception of several that retained their primary morphology following lyophilization/reconstitution, although no obvious trends were noted between the microstructure of the copolymers or the physicochemical properties of the drugs and their successful redispersion.

Partition of the Reactive Species of the Suzuki-Miyaura Reaction between Aqueous and Micellar Environments

The Suzuki-Miyaura reaction between the aryl halide (1) and the phenyl boronic acid (2), in the presence of the palladium(0) complex (3) as catalyst, gives the cross-coupling product (4) in quantitative yield when performed in basic aqueous solution of the nonionic surfactant Kolliphor-EL (K-EL). The partition between the aqueous and micellar environments of the species of this reaction has been investigated by means of Molecular Dynamics (MD) simulations. Starting from the K-EL molecules dispersed in water, a micelle model has been generated by MD simulations, adopting the 2016H66 force field. Reagent and product species have been described with the same force field, once the reliability of this force field has been tested comparing the n-octanol/water partition free energies calculated from the MD and Free Energy Perturbation (FEP) method with those obtained from the quantum-mechanical SMD method. The potential of mean force for the transfer process between water and the micellar phase of the different species has been calculated by the MD simulations and the Umbrella Sampling (US) method. The overall picture that emerges from these results confirms that the molecular species involved in this reaction prefers the micellar environment and concentrates in different but close zones of the micelle. This supports the experimental evidence that the use of suitable surfactant agents promotes reactivity, allowing micelles to behave as nanoreactors in which reactive species are solubilized and enhance their local concentration.

Molecular Dynamics Simulation of Drug Solubilization Behavior in Surfactant and Cosolvent Injections

Surfactants and cosolvents are often combined to solubilize insoluble drugs in commercially available intravenous formulations to achieve better solubilization. In this study, six marketed parenteral formulations with surfactants and cosolvents were investigated on the aggregation processes of micelles, the structural characterization of micelles, and the properties of solvent using molecular dynamics simulations. The addition of cosolvents resulted in better hydration of the core and palisade regions of micelles and an increase in both radius of gyration (Rg) and the solvent accessible surface area (SASA), causing a rise in critical micelle concentration (CMC), which hindered the phase separation of micelles. At the same time, the presence of cosolvents disrupted the hydrogen bonding structure of water in solution, increasing the solubility of insoluble medicines. Therefore, the solubilization mechanism of the cosolvent and surfactant mixtures was successfully analyzed by molecular dynamics simulation, which will benefit future formulation development for drug delivery.

Ionic co-aggregates (ICAs) based oral drug delivery: Solubilization and permeability improvement

Due to the overwhelming percentage of poorly water-soluble drugs, pharmaceutical industry is in urgent need of efficient approaches for solubilization and permeability improvement. Salts consisting of lipophilic fatty acid anions and hydrophilic choline cations are found to be surface active and able to form ionic co-aggregates (ICAs) in water. Choline oleate-based ICAs significantly enhance oral absorption of paclitaxel (PTX) as compared with cremophor EL-based micelles (MCs). Aggregation-caused quenching probes enable tracking of intact ICAs in in vivo transport and cellular interaction. Prolonged intestinal retention of ICAs than MCs implies stronger solubilizing capability in vivo. Ex vivo imaging of major organs and intestinal tracts suggests transepithelial transport of intact ICAs. Cellular studies support the enhanced absorption of PTX and transmembrane transport of intact ICAs. In conclusion, ICAs, consisting of lipophilic ions and hydrophilic counter-ions, are of great potential in delivery of poorly water-soluble drugs by enhancing solubility and permeability.

Computational and Experimental Models of Type III Lipid-Based Formulations of Loratadine Containing Complex Nonionic Surfactants

Type III lipid-based formulations (LBFs) combine poorly water-soluble drugs with oils, surfactants, and cosolvents to deliver the drugs into the systemic circulation. However, the solubility of the drug can be influenced by the colloidal phases formed in the gastrointestinal tract as the formulation is dispersed and makes contact with bile and other materials present within the GI tract. Thus, an understanding of the phase behavior of LBFs in the gut is critical for designing efficient LBFs. Molecular dynamics (MD) simulation is a powerful tool for the study of colloidal systems. In this study, we modeled the internal structures of five type III LBFs of loratadine containing poly(ethylene oxide) nonionic surfactants polysorbate 80 and polyoxyl hydrogenated castor oil (Kolliphor RH40) using long-timescale MD simulations (0.4-1.7 μs). We also conducted experimental investigations (dilution of formulations with water) including commercial Claritin liquid softgel capsules. The simulations show that LBFs form continuous phase, water-swollen reverse micelles, and bicontinuous and phase-separated systems at different dilutions, which correlate with the experimental observations. This study supports the use of MD simulation as a predictive tool to determine the fate of LBFs composed of medium-chain lipids, polyethylene oxide surfactants, and polymers.

Molecular Dynamics Simulations and Experimental Results Provide Insight into Clinical Performance Differences between Sandimmune® and Neoral® Lipid-Based Formulations

OBJECTIVE

Molecular dynamics (MD) simulations provide an in silico method to study the structure of lipid-based formulations (LBFs) and the incorporation of poorly water-soluble drugs within such formulations. In order to validate the ability of MD to effectively model the properties of LBFs, this work investigates the well-known cyclosporine A formulations, Sandimmune® and Neoral®. Sandimmune® exhibits poor dispersibility and its absorption from the gastrointestinal tract is enhanced when administered after food, whereas Neoral® disperses comparatively well and shows no food effect.

METHODS

MD simulations were performed of both LBFs to investigate the differences observed in fasted and fed conditions. These conditions were also tested using an in vitro experimental model of dispersion and digestion.

RESULTS

These MD simulations were able to show that the food effect observed for Sandimmune® can be explained by large changes in drug solubilization on addition of bile. In contrast, Neoral® is well dispersed in water or in simulated fasted conditions, and this dispersion is relatively unchanged on moving to fed conditions. These differences were confirmed using dispersion and digestion in vitro experimental model.

CONCLUSIONS

The current data suggests that MD simulations are a potential method to model the fate of LBFs in the gastrointestinal tract, predict their dispersion and digestion, investigate behaviour of APIs within the formulations, and provide insights into the clinical performance of LBFs.

Tuning the Mechanical and Thermal Properties of Hydroxypropyl Methylcellulose Cryogels with the Aid of Surfactants

The mechanical and thermal properties of cryogels depend on their microstructure. In this study, the microstructure of hydroxypropyl methylcellulose (HPMC) cryogels was modified by the addition of ionic (bis (2-ethylhexyl) sodium sulfosuccinate, AOT) and non-ionic (Kolliphor^® EL) surfactants to the precursor hydrogels (30 g/L). The surfactant concentrations varied from 0.2 mmol/L to 3.0 mmol/L. All of the hydrogels presented viscous behavior (G″ > G′). Hydrogels containing AOT (c > 2.0 mmol/L) led to cryogels with the lowest compressive modulus (13 ± 1 kPa), the highest specific surface area (2.31 m²/g), the lowest thermal conductivity (0.030 W/(m·°C)), and less hygroscopic walls. The addition of Kolliphor^® EL to the hydrogels yielded the stiffest cryogels (320 ± 32 kPa) with the lowest specific surface area (1.11 m²/g) and the highest thermal conductivity (0.055 W/(m·°C)). Density functional theory (DFT) calculations indicated an interaction energy of −31.8 kcal/mol due to the interaction between the AOT sulfonate group and the HPMC hydroxyl group and the hydrogen bond between the AOT carbonyl group and the HPMC hydroxyl group. The interaction energy between the HPMC hydroxyl group and the Kolliphor^® EL hydroxyl group was calculated as −7.91 kcal/mol. A model was proposed to describe the effects of AOT or Kolliphor^® EL on the microstructures and the mechanical/thermal properties of HPMC cryogels.

Charge reversal self-emulsifying drug delivery systems: A comparative study among various phosphorylated surfactants

HYPOTHESIS

Phosphorylated surfactants having ethoxylate spacer arms are promising excipients for charge reversal self-emulsifying drug delivery systems (SEDDS).

EXPERIMENTS

1,2-Dipalmitoyl-sn-glycero-3-phosphatidic acid disodium salt (PA), 2-((2,3-bis(oleoyloxy)propyl)dimethylammonio)ethyl hydrogen phosphate (DOCP), nonylphenol monophosphate ester (PNPP), C12-15 alcohol 3 ethoxylate phosphate ester (PME) and polyoxyethylene (9) dioctanoyl glycerol pyrophosphate (DGPP) loaded SEDDS were developed and characterized. Zeta potential of SEDDS was measured before and after incubation with intestinal alkaline phosphatase (IAP). Phosphate release was monitored by incubation of SEDDS with isolated as well as cell-associated IAP. Primary amine content on the surface of SEDDS was determined in parallel. Cytotoxicity was evaluated on Caco-2 cells and in vitro hemolysis test was performed. Cellular uptake studies were performed by confocal scanning microscopy.

FINDINGS

SEDDS formulations exhibited a size in the range of 17 and 193 nm and a polydispersity index (PDI) ≤ 0.5. Charge reversal from negative to positive values could be achieved in case of PNPP and PME loaded SEDDS with a zeta potential changing from -13 mV to +9 mV and from -7 to +2 mV, respectively, within 6 h. Significant amounts of phosphate were released from PNPP and PME loaded SEDDS incubated with isolated IAP and from all formulations incubated with cell-associated IAP in accordance with an increase in primary amines on the surface of oily droplets. SEDDS exhibited a concentration and time-dependent cytotoxicity. PNPP and PME SEDDS displayed an increased cellular uptake.

Aqueous phase behavior of the PEO-containing non-ionic surfactant C12E6: A molecular dynamics simulation study

HYPOTHESIS

Non-ionic surfactants containing polyethylene oxide (PEO) chains are widely used in drug formulations, cosmetics, paints, textiles and detergents. High quality molecular dynamics models for PEO surfactants can give us detailed, atomic-scale information about the behavior of surfactant/water mixtures.

SIMULATIONS

We used two molecular dynamics force fields (FFs), 2016H66 and 53A6_DBW, to model the simple non-ionic PEO surfactant, hexaoxyethylene dodecyl ether (C₁₂E₆). We investigated surfactant/water mixtures that span the phase diagram of starting from randomly distributed arrangements. In some cases, we also started with prebuilt, approximate models. The simulations results were compared with the experimentally observed phase behavior.

FINDINGS

Overall, this study shows that the spontaneous self-assembly of PEO non-ionic surfactants into different colloidal structures can be accurately modeled with MD simulations using the 2016H66 FF although transitions to well-formed hexagonal phase are slow. Of the two FFs investigated, the 2016H66 FF better reproduces the experimental phase behavior across all regions of the C₁₂E_6/water phase diagram.

Development of New Indonesian Propolis Extract-Loaded Self-emulsifying: Characterization, Stability and Antibacterial Activity

Purpose: This study aimed to prepare, characterize, examine the stability and evaluation of the antibacterial activity of Indonesian propolis extract-loaded self-emulsifying (PESE).

Methods: Oil, emulsifier, and co-emulsifier were selected as the carrier for the PESE formulation through a propolis-extract solubility test on each carrier, followed by evaluation of the nanoemulsion region in a pseudo ternary phase diagram. Pre-concentrate of PESE was prepared with the addition of 150 mg/mL propolis extract followed by characterization for the transmittance, globule size, zeta potential, thermodynamic stability, robustness to dilution, and accelerated stability. The selected formulation was tested for antibacterial activity using a microdilution method.

Results: The PESE characterization produced a clear nanoemulsion with a globule size ranging from 13 to 45 nm and zeta potential of less than −38 mV. The PESE formulation with a composition of 150 mg/mL propolis extract, 20% castor oil, 40%–70% Kolliphor EL, and 10%–40% polyethylene glycol (PEG) 400 were thermodynamically stable. The PESE formulation with the composition of 20% castor oil, 40% Kolliphor EL, and 40% PEG 400 was the optimum formulation that passed the robustness to dilution evaluation and an accelerated stability test for 3 months. The antibacterial activity test on this formulation indicated improved activity against Escherichia coli and Staphylococcus aureus compared with that of propolis extract.

Conclusion: These studies demonstrated that PESE in optimum formulation could be used as an antibacterial, particularly in E. coli and S. aureus.

Coarse-Grained Molecular Dynamic and Experimental Studies on Self-Assembly Behavior of Nonionic F127/HS15 Mixed Micellar Systems

The self-assembly of a nonionic triblock copolymer (F127) and a nonionic surfactant (HS15) has been investigated due to favorable changes in properties in their mixtures. The effect of the mixing ratio on the self-assembly process and on the structural stability of the mixtures was studied by coarse-grained molecular dynamic simulation (CGMD) and experimental measurements (transmission electron microscopy, dynamic light scattering measurement, drug loading stability analysis, and fluorescence spectroscopy measurement). The CGMD provided the information on self-assembly behavior. The microstructure and micellar stability are affected by different proportions of F127/HS15. Pure HS15 molecules (system I) can rapidly form stable aggregates driven by strong hydrophobic force, including two steps: the formation of seed clusters and the fusion of them. At low F127 ratio (system II), the self-assembly process is dynamic unstable, and a volatile "coil/cluster-like" aggregate is formed under the single "binding" effect. As the ratio of added F127 increase, such as system III, stable "lotus-seedpod-like" aggregates form under the double effects of "binding plus wrapping". Its dynamic equilibrium can be achieved rapidly. The experimental results approved the assumption of "different mixing ratio with different structural stability" and even different loading stability of F127/HS15 systems for drugs with different log P, such as PUE and DTX, which means different loading area for them in the micellar systems at different mixing ratios because of less hydrophobic microdomains with the increase of F127 molecules.

Substrate-Assisted Visualization of Surfactant Micelles via Transmission Electron Microscopy

The visualization of the micellar morphological evolution for surfactant has drawn much attention due to its self-assemble ability to fold into various structures. However, the direct observation of the soft materials with low atomic number has been hampered because of the poor scattering contrast and complex staining process by the traditional transmission electron microscopy (TEM) techniques. Herein, we reported a novel strategy to the visualization of surfactant micelles with the assistance of layered double hydroxides (LDHs) via TEM. Owing to the uniformly distributed metal ions and positive charges in the LDHs, the surfactant at the micelle-water interface reacted with LDHs to form a stabilized architecture through electrostatic and hydrogen-bond interactions. The morphologies of the surfactant can be clearly observed through the surfactant-LDHs architectures, exhibiting high contrast by TEM techniques. Significantly, the micellar evolutions involving the spherical, rodlike, and wormlike shapes were successfully distinguished. Our results may provide great possibilities and inspirations for the visualization for morphology of soft matters.

Unlocking the full potential of lipid-based formulations using lipophilic salt/ionic liquid forms

Lipid-based formulations (LBF) are widely used by industry and accepted by the regulatory authorities for oral drug delivery in the pharmaceutical and consumer healthcare market. Innovation in the LBF field is however needed in order to meet the demands of modern drugs, their more challenging problem statements and growing needs for achieving optimal pharmacokinetics (i.e., no food-effects, low variability) on approval. This review describes a new lipophilic salt / ionic liquid approach in combination with LBF, and how this salt strategy can be used to better tailor the properties of a drug to LBFs. The potential advantages of lipophilic salts are discussed in the context of dose escalation studies during toxicological evaluation, reducing the pill burden, increasing drug absorption of new drugs and in life-cycle management. Commentary on lipophilic salt synthesis, scale-up, LBF design and the regulatory aspects are also provided. These topics are discussed in the broad context of bringing the widely recognized advantages of LBFs to a broader spectrum of drugs.