Metabolic engineering of Synechococcus sp. PCC 7002 to produce poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-4-hydroxybutyrate

Impact of Carbon Fixation, Distribution and Storage on the Production of Farnesene and Limonene in Synechocystis PCC 6803 and Synechococcus PCC 7002

Terpenes are high-value chemicals which can be produced by engineered cyanobacteria from sustainable resources, solar energy, water and CO2. We previously reported that the euryhaline unicellular cyanobacteria Synechocystis sp. PCC 6803 (S.6803) and Synechococcus sp. PCC 7002 (S.7002) produce farnesene and limonene, respectively, more efficiently than other terpenes. In the present study, we attempted to enhance farnesene production in S.6803 and limonene production in S.7002. Practically, we tested the influence of key cyanobacterial enzymes acting in carbon fixation (RubisCO, PRK, CcmK3 and CcmK4), utilization (CrtE, CrtR and CruF) and storage (PhaA and PhaB) on terpene production in S.6803, and we compared some of the findings with the data obtained in S.7002. We report that the overproduction of RubisCO from S.7002 and PRK from Cyanothece sp. PCC 7425 increased farnesene production in S.6803, but not limonene production in S.7002. The overexpression of the crtE genes (synthesis of terpene precursors) from S.6803 or S.7002 did not increase farnesene production in S.6803. In contrast, the overexpression of the crtE gene from S.6803, but not S.7002, increased farnesene production in S.7002, emphasizing the physiological difference between these two model cyanobacteria. Furthermore, the deletion of the crtR and cruF genes (carotenoid synthesis) and phaAB genes (carbon storage) did not increase the production of farnesene in S.6803. Finally, as a containment strategy of genetically modified strains of S.6803, we report that the deletion of the ccmK3K4 genes (carboxysome for CO2 fixation) did not affect the production of limonene, but decreased the production of farnesene in S.6803.

High-Density Guide RNA Tiling and Machine Learning for Designing CRISPR Interference in Synechococcus sp. PCC 7002

While CRISPRi was previously established in Synechococcus sp. PCC 7002 (hereafter 7002), the design principles for guide RNA (gRNA) effectiveness remain largely unknown. Here, 76 strains of 7002 were constructed with gRNAs targeting three reporter systems to evaluate features that impact gRNA efficiency. Correlation analysis of the data revealed that important features of gRNA design include the position relative to the start codon, GC content, protospacer adjacent motif (PAM) site, minimum free energy, and targeted DNA strand. Unexpectedly, some gRNAs targeting upstream of the promoter region showed small but significant increases in reporter expression, and gRNAs targeting the terminator region showed greater repression than gRNAs targeting the 3' end of the coding sequence. Machine learning algorithms enabled prediction of gRNA effectiveness, with Random Forest having the best performance across all training sets. This study demonstrates that high-density gRNA data and machine learning can improve gRNA design for tuning gene expression in 7002.

Microbial lignin valorization through depolymerization to aromatics conversion

Lignin is the most abundant source of renewable aromatic biopolymers and its valorization presents significant value for biorefinery sustainability, which promotes the utilization of renewable resources. However, it is challenging to fully convert the structurally complex, heterogeneous, and recalcitrant lignin into high-value products. The in-depth research on the lignin degradation mechanism, microbial metabolic pathways, and rational design of new systems using synthetic biology have significantly accelerated the development of lignin valorization. This review summarizes the key enzymes involved in lignin depolymerization, the mechanisms of microbial lignin conversion, and the lignin valorization application with integrated systems and synthetic biology. Current challenges and future strategies to further study lignin biodegradation and the trends of lignin valorization are also discussed.

Engineering type I methanotrophic bacteria as novel platform for sustainable production of 3-hydroxybutyrate and biodegradable polyhydroxybutyrate from methane and xylose

Methylotuvimicrobium alcaliphilum20Z recombinant strain co-utilizing methane and xylose from anthropogenic activities and lignocellulose biomassis a promising cell factory platform. In this study, the production of (R)-3-hydroxybutyrate and poly (3-hydroxybutyrate) inM. alcaliphilum20Z was demonstrated. The production of (R)-3-hydroxybutyrate was optimized by introducing additional thioesterase, and a tunable genetic module. The final recombinant strain produced the highest titer of 334.52 ± 2 mg/L (R)-3-hydroxybutyrate (yield of 1,853 ± 429 mg/g dry cell weight). The poly (3-hydroxybutyrate) yielded 1.29 ± 0.08% (w/w) from methane and xylose in one-stage cultivation. Moreover, the study demonstrated the importance of pathway reversibility as an effective design strategy for balancing the driving force and intermediate accumulation. This is the first demonstration of the production ofbiodegradablepoly (3-hydroxybutyrate) from methane in type I methanotrophs, which is a key step toward sustainable biomanufacturing and carbon-neutral society.

Light-Driven Synthetic Biology: Progress in Research and Industrialization of Cyanobacterial Cell Factory

Light-driven synthetic biology refers to an autotrophic microorganisms-based research platform that remodels microbial metabolism through synthetic biology and directly converts light energy into bio-based chemicals. This technology can help achieve the goal of carbon neutrality while promoting green production. Cyanobacteria are photosynthetic microorganisms that use light and CO₂ for growth and production. They thus possess unique advantages as "autotrophic cell factories". Various fuels and chemicals have been synthesized by cyanobacteria, indicating their important roles in research and industrial application. This review summarized the progresses and remaining challenges in light-driven cyanobacterial cell factory. The choice of chassis cells, strategies used in metabolic engineering, and the methods for high-value CO₂ utilization will be discussed.

Synthetic biology in marine cyanobacteria: Advances and challenges

The current economic and environmental context requests an accelerating development of sustainable alternatives for the production of various target compounds. Biological processes offer viable solutions and have gained renewed interest in the recent years. For example, photosynthetic chassis organisms are particularly promising for bioprocesses, as they do not require biomass-derived carbon sources and contribute to atmospheric CO2 fixation, therefore supporting climate change mitigation. Marine cyanobacteria are of particular interest for biotechnology applications, thanks to their rich diversity, their robustness to environmental changes, and their metabolic capabilities with potential for therapeutics and chemicals production without requiring freshwater. The additional cyanobacterial properties, such as efficient photosynthesis, are also highly beneficial for biotechnological processes. Due to their capabilities, research efforts have developed several genetic tools for direct metabolic engineering applications. While progress toward a robust genetic toolkit is continuously achieved, further work is still needed to routinely modify these species and unlock their full potential for industrial applications. In contrast to the understudied marine cyanobacteria, genetic engineering and synthetic biology in freshwater cyanobacteria are currently more advanced with a variety of tools already optimized. This mini-review will explore the opportunities provided by marine cyanobacteria for a greener future. A short discussion will cover the advances and challenges regarding genetic engineering and synthetic biology in marine cyanobacteria, followed by a parallel with freshwater cyanobacteria and their current genetic availability to guide the prospect for marine species.

Cyanobacteria as a Promising Alternative for Sustainable Environment: Synthesis of Biofuel and Biodegradable Plastics

With the aim to alleviate the increasing plastic burden and carbon footprint on Earth, the role of certain microbes that are capable of capturing and sequestering excess carbon dioxide (CO2) generated by various anthropogenic means was studied. Cyanobacteria, which are photosynthetic prokaryotes, are promising alternative for carbon sequestration as well as biofuel and bioplastic production because of their minimal growth requirements, higher efficiency of photosynthesis and growth rates, presence of considerable amounts of lipids in thylakoid membranes, and cosmopolitan nature. These microbes could prove beneficial to future generations in achieving sustainable environmental goals. Their role in the production of polyhydroxyalkanoates (PHAs) as a source of intracellular energy and carbon sink is being utilized for bioplastic production. PHAs have emerged as well-suited alternatives for conventional plastics and are a parallel competitor to petrochemical-based plastics. Although a lot of studies have been conducted where plants and crops are used as sources of energy and bioplastics, cyanobacteria have been reported to have a more efficient photosynthetic process strongly responsible for increased production with limited land input along with an acceptable cost. The biodiesel production from cyanobacteria is an unconventional choice for a sustainable future as it curtails toxic sulfur release and checks the addition of aromatic hydrocarbons having efficient oxygen content, with promising combustion potential, thus making them a better choice. Here, we aim at reporting the application of cyanobacteria for biofuel production and their competent biotechnological potential, along with achievements and constraints in its pathway toward commercial benefits. This review article also highlights the role of various cyanobacterial species that are a source of green and clean energy along with their high potential in the production of biodegradable plastics.

Sustainable production of polyhydroxybutyrate from autotrophs using CO2 as feedstock: Challenges and opportunities

Due to industrialization and rapid increase in world population, the global energy consumption has increased dramatically. As a consequence, there is increased consumption of fossil fuels, leading to a rapid increase in CO₂ concentration in the atmosphere. This accumulated CO₂ can be efficiently used by autotrophs as a carbon source to produce chemicals and biopolymers. There has been increasing attention on the production of polyhydroxybutyrate (PHB), a biopolymer, with focus on reducing the production cost. For this, cheaper renewable feedstocks, molecular tools, including metabolic and genetic engineering have been explored to improve microbial strains along with process engineering aspects for scale-up of PHB production. This review discusses the recent advents on the utilization of CO₂ as feedstock especially by engineered autotrophs, for sustainable production of PHB. The review also discusses the innovations in cultivation technology and process monitoring while understanding the underlying mechanisms for CO₂ to biopolymer conversion.

Current Advances towards 4-Hydroxybutyrate Containing Polyhydroxyalkanoates Production for Biomedical Applications

Polyhydroxyalkanoates (PHA) are polyesters having high promise in biomedical applications. Among different types of PHA, poly-4-hydroxybutyrate (P4HB) is the only polymer that has received FDA approval for medical applications. However, most PHA producing microorganisms lack the ability to synthesize P4HB or PHA comprising 4-hydroxybutyrate (4HB) monomer due to their absence of a 4HB monomer supplying pathway. Thus, most microorganisms require supplementation of 4HB precursors to synthesize 4HB polymers. However, usage of 4HB precursors incurs additional production cost. Therefore, researchers have adopted strategies to reduce the cost, such as utilizing low-cost substrate as well as constructing 4HB monomer supplying pathways in microorganisms. We herein summarize the biomedical applications of P4HB, the natural producers of 4HB polymer, and the various strategies that have been applied in producing 4HB polymers in non-4HB producing microorganisms. It is expected that the readers would gain a vivid idea on the different strategic developments in the field of 4HB polymer production.

Recent progress and challenges in microbial polyhydroxybutyrate (PHB) production from CO2 as a sustainable feedstock: A state-of-the-art review

The recalcitrance of petroleum-based plastics causes severe environmental problems and has accelerated research into production of biodegradable polymers from inexpensive and sustainable feedstocks. Various microorganisms are capable of producing Polyhydroxybutyrate (PHB), a representative biodegradable polymer, under nutrient-limited conditions, among which CO₂-utilizing microorganisms are of primary interest. Herein, we discuss recent progress on bacterial strains including proteobacteria, purple non-sulfur bacteria, and cyanobacteria in terms of CO₂-containing carbon sources, PHB-production capability, and genetic modification. In addition, this review introduces recent technical approaches used to improve PHB production from CO₂ such as two-stage bioprocesses and bioelectrochemical systems. Challenges and future perspectives for the development of economically feasible PHB production are also discussed. Finally, this review might provide insights into the construction of a closed-carbon-loop to cope with climate change.

Methane-based biosynthesis of 4-hydroxybutyrate and P(3-hydroxybutyrate-co-4-hydroxybutyrate) using engineered Methylosinus trichosporium OB3b

4-Hydroxybutyric acid (4-HB) is a key platform chemical that serves as a precursor in a wide variety of industrial applications including 1,4-butanediol and bioplastics production. In this study, we reconstructed 4-HB biosynthetic pathway including CoA-dependent succinate semialdehyde dehydrogenase and NADPH-dependent succinate semialdehyde reductase in Type II methanotrophs, Methylosinus trichosporium OB3b, to synthesize 4-HB. These engineered strains were able to synthesize 4-HB from methane via tricarboxylic acid cycle. 4-HB synthesis was further improved to 10.5 mg/L by overexpressing phosphoenolpyruvate carboxylase, isocitrate dehydrogenase and 2-oxoglutarate dehydrogenase genes in M. trichosporium OB3b. We combined the native poly(3-hydroxybutyrate) metabolic pathway and reconstructed 4-HB biosynthetic pathway to synthesize P(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymer from structurally unrelated substrate methane as a single carbon source. These engineered strains could synthesize P(3HB-co-4HB) copolymer with 3.08 mol% 4-HB from methane. This study provides several engineering strategies to synthesize polyhydroxyalkanoates and their monomers from methane.

P(3HB-co-4HB) as high value polyhydroxyalkanoate: its development over recent decades and current advances

Polyhydroxyalkanoate (PHA) is a biogenic polymer that has the potential to substitute synthetic plastic in numerous applications. This is due to its unique attribute of being a biodegradable and biocompatible thermoplastic, achievable through microbial fermentation from a broad utilizable range of renewable resources. Among all the PHAs discovered, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] stands out as a next generation healthcare biomaterial for having high biopharmaceutical and medical value since it is highly compatible to mammalian tissue. This review provides a critical assessment and complete overview of the development and trend of P(3HB-co-4HB) research over the last few decades, highlighting aspects from the microbial strain discovery to metabolic engineering and bioprocess cultivation strategies. The article also outlines the relevance of P(3HB-co-4HB) as a material for high value-added products in numerous healthcare-related applications.

Challenges and Perspectives of Polyhydroxyalkanoate Production From Microalgae/Cyanobacteria and Bacteria as Microbial Factories: An Assessment of Hybrid Biological System

Polyhydroxyalkanoates (PHAs) are the biopolymer of choice if we look for a substitute of petroleum-based non-biodegradable plastics. Microbial production of PHAs as carbon reserves has been studied for decades and PHAs are gaining attention for a wide range of applications in various fields. Still, their uneconomical production is the major concern largely attributed to high cost of organic substrates for PHA producing heterotrophic bacteria. Therefore, microalgae/cyanobacteria, being photoautotrophic, prove to have an edge over heterotrophic bacteria. They have minimal metabolic requirements, such as inorganic nutrients (CO2, N, P, etc.) and light, and they can survive under adverse environmental conditions. PHA production under photoautotrophic conditions has been reported from cyanobacteria, the only candidate among prokaryotes, and few of the eukaryotic microalgae. However, an efficient cultivation system is still required for photoautotrophic PHA production to overcome the limitations associated with (1) stringent management of closed photobioreactors and (2) optimization of monoculture in open pond culture. Thus, a hybrid system is a necessity, involving the participation of microalgae/cyanobacteria and bacteria, i.e., both photoautotrophic and heterotrophic components having mutual interactive benefits for each other under different cultivation regime, e.g., mixotrophic, successive two modules, consortium based, etc. Along with this, further strategies like optimization of culture conditions (N, P, light exposure, CO2 dynamics, etc.), bioengineering, efficient downstream processes, and the application of mathematical/network modeling of metabolic pathways to improve PHA production are the key areas discussed here. Conclusively, this review aims to critically analyze cyanobacteria as PHA producers and proposes economically sustainable production of PHA from microbial autotrophs and heterotrophs in "hybrid biological system."

Modifying the Cyanobacterial Metabolism as a Key to Efficient Biopolymer Production in Photosynthetic Microorganisms

Cyanobacteria are photoautotrophic bacteria commonly found in the natural environment. Due to the ecological benefits associated with the assimilation of carbon dioxide from the atmosphere and utilization of light energy, they are attractive hosts in a growing number of biotechnological processes. Biopolymer production is arguably one of the most critical areas where the transition from fossil-derived chemistry to renewable chemistry is needed. Cyanobacteria can produce several polymeric compounds with high applicability such as glycogen, polyhydroxyalkanoates, or extracellular polymeric substances. These important biopolymers are synthesized using precursors derived from central carbon metabolism, including the tricarboxylic acid cycle. Due to their unique metabolic properties, i.e., light harvesting and carbon fixation, the molecular and genetic aspects of polymer biosynthesis and their relationship with central carbon metabolism are somehow different from those found in heterotrophic microorganisms. A greater understanding of the processes involved in cyanobacterial metabolism is still required to produce these molecules more efficiently. This review presents the current state of the art in the engineering of cyanobacterial metabolism for the efficient production of these biopolymers.

Engineering salt tolerance of photosynthetic cyanobacteria for seawater utilization

Photosynthetic cyanobacteria are capable of utilizing sunlight and CO₂ as sole energy and carbon sources, respectively. With genetically modified cyanobacteria being used as a promising chassis to produce various biofuels and chemicals in recent years, future large-scale cultivation of cyanobacteria would have to be performed in seawater, since freshwater supplies of the earth are very limiting. However, high concentration of salt is known to inhibit the growth of cyanobacteria. This review aims at comparing the mechanisms that different cyanobacteria respond to salt stress, and then summarizing various strategies of developing salt-tolerant cyanobacteria for seawater cultivation, including the utilization of halotolerant cyanobacteria and the engineering of salt-tolerant freshwater cyanobacteria. In addition, the challenges and potential strategies related to further improving salt tolerance in cyanobacteria are also discussed.

Poly(4-Hydroxybutyrate): Current State and Perspectives

By the end of 1980s, for the first time polyhydroxyalkanoate (PHA) copolymers with incorporated 4-hydroxybutyrate (4HB) units were produced in the bacterium Cupriavidus necator (formally Ralstonia eutropha) from structurally related carbon sources. After that, production of PHA copolymers composed of 3-hydroxybutyrate (3HB) and 4HB [P(3HB-co-4HB)] was demonstrated in diverse wild-type bacteria. The P4HB homopolymer, however, was hardly synthesized because existing bacterial metabolism on 4HB precursors also generate and incorporate 3HB. The resulting material assumes the properties of thermoplastics and elastomers depending on the 4HB fraction in the copolyester. Given the fact that P4HB is biodegradable and yield 4HB, which is a normal compound in the human body and proven to be biocompatible, P4HB has become a prospective material for medical applications, which is the only FDA approved PHA for medical applications since 2007. Different from other materials used in similar applications, high molecular weight P4HB cannot be produced via chemical synthesis. Thus, aiming at the commercial production of this type of PHA, genetic engineering was extensively applied resulting in various production strains, with the ability to convert unrelated carbon sources (e.g., sugars) to 4HB, and capable of producing homopolymeric P4HB. In 2001, Metabolix Inc. filed a patent concerning genetically modified and stable organisms, e.g., Escherichia coli, producing P4HB and copolymers from inexpensive carbon sources. The patent is currently hold by Tepha Inc., the only worldwide producer of commercial P4HB. To date, numerous patents on various applications of P4HB in the medical field have been filed. This review will comprehensively cover the historical evolution and the most recent publications on P4HB biosynthesis, material properties, and industrial and medical applications. Finally, perspectives for the research and commercialization of P4HB will be presented.

Pilot Scale-up of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Production by Halomonas bluephagenesis via Cell Growth Adapted Optimization Process

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate), P(3HB-co-4HB), is one of the most valuable biopolymers because of its flexible mechanical properties. In this study, the goal is to establish a scaled-up process of low cost P(3HB-co-4HB) from a 7.5-L fermentor to 1- and 5-m³ industrial bioreactors, respectively, using Halomonas bluephagenesis TD40 grown on glucose, γ-butyrolactone, and waste corn steep liquor (CSL) as substrates, under open non-sterile and fed-batch or continuous conditions. The non-sterile process enables the energy reduction for less steam consumption. Moreover, waste gluconate is successfully utilized to replace glucose as a carbon source for cell growth and PHA accumulation in 7.5-L fermentor, which opens the possibility of 60% of raw material cost reduction for recycling the waste resources. A mathematical model and rational calculation is established to help guide the feeding strategy and scale-up, respectively, leading to 100 g L^-1 cell dry weight (CDW) containing 60.4% P(3HB-co-mol 13.5% 4HB) after 36 h of growth in the 5 m³ vessel. An even higher P(3HB-co-4HB) content of 74% is achieved by decreasing the use of waste CSL. A stable and continuous open process for efficient low-cost production of P(3HB-co-4HB) is successfully developed coupling fermentation with the downstream extraction processing.

Presence of a [3Fe-4S] cluster in a PsaC variant as a functional component of the photosystem I electron transfer chain in Synechococcus sp. PCC 7002

A site-directed C14G mutation was introduced into the stromal PsaC subunit of Synechococcus sp. strain PCC 7002 in vivo in order to introduce an exchangeable coordination site into the terminal F_B [4Fe-4S] cluster of Photosystem I (PSI). Using an engineered PSI-less strain (psaAB deletion), psaC was deleted and replaced with recombinant versions controlled by a strong promoter, and the psaAB deletion was complemented. Modified PSI accumulated at lower levels in this strain and supported slower photoautotrophic growth than wild type. As-isolated PSI complexes containing PsaC_C14G showed resonances with g values of 2.038 and 2.007 characteristic of a [3Fe-4S]¹⁺ cluster. When the PSI complexes were illuminated at 15 K, these resonances partially disappeared and two new sets of resonances appeared. The majority set had g values of 2.05, 1.95, and 1.85, characteristic of F_A^-, and the minority set had g values of 2.11, 1.90, and 1.88 from F_B' in the modified site. The S = 1/2 spin state of the latter implied the presence of a thiolate as the terminal ligand. The [3Fe-4S] clusters could be partially reconstituted with iron, producing a larger population of [4Fe-4S] clusters. Rates of flavodoxin reduction were identical in PSI complexes isolated from wild type and the PsaC_C14G variant strain; this implied equivalent capacity for forward electron transfer in PSI complexes that contained [3Fe-4S] and [4Fe-4S] clusters. The development of this cyanobacterial strain is a first step toward translation of in vitro PSI-based biosolar molecular wire systems in vivo and provides new insights into the formation of Fe/S clusters.

Glycogen Production in Marine Cyanobacterial Strain Synechococcus sp. NKBG 15041c

An important feature offered by marine cyanobacterial strains over freshwater strains is the capacity to grow in seawater, replacing the need for often-limited freshwater. However, there are only limited numbers of marine cyanobacteria that are available for genetic manipulation and bioprocess applications. The marine unicellular cyanobacteria Synechococcus sp. strain NKBG 15041c (NKBG15041c) has been extensively studied. Recombinant DNA technologies are available for this strain, and its genomic information has been elucidated. However, an investigation of carbohydrate production, such as glycogen production, would provide information for inevitable biofuel-related compound production, but it has not been conducted. In this study, glycogen production by marine cyanobacterium NKBG15041c was investigated under different cultivation conditions. NKBG15041c yielded up to 399 μg/ml/OD₇₃₀ when cells were cultivated for 168 h in nitrogen-depleted medium (marine BG11_ΔN) after medium replacement (336 h after inoculation). Cultivation under nitrogen-limited conditions also yielded an accumulation of glycogen in NKBG15041c cells (1 mM NaNO₃, 301 μg/ml/OD₇₃₀; 3 mM NaNO₃, 393 μg/ml/OD₇₃₀; and 5 mM NaNO₃, 328 μg/ml/OD₇₃₀) under ambient conditions. Transcriptional analyses were carried out for 13 putative genes responsible for glycogen synthesis and catabolism that were predicted based on homology analyses with Synechocystis sp. PCC 6803 (PCC6803) and Synechococcus sp. PCC7002 (PCC7002). The transcriptional analyses revealed that glycogen production in NKBG15041c under nitrogen-depleted conditions can be explained by the contribution of both increased carbon flux towards glycogen synthesis, similar to PCC6803 and PCC7002, and increased transcriptional levels of genes responsible for glycogen synthesis, which is different from the conventionally reported phenomenon, resulting in a relatively high amount of glycogen under ambient conditions compared to PCC6803 and PCC7002.

Expression and biochemical characterization of α-ketoglutarate decarboxylase from cyanobacterium Synechococcus sp. PCC7002

α-Ketoglutarate decarboxylase (α-KGD), one member of α-keto acid decarboxylases, catalyzing non-oxidative decarboxylation of α-ketoglutarate to form succinic semialdehyde, was proposed to play critical role in completing tricarboxylic acid (TCA) cycle of cyanobacteria. Although the catalytic function of α-KGD from Synechococcus sp. PCC7002 was demonstrated previously, there was no detailed biochemical characterization of α-KGD from Synechococcus sp. PCC7002 yet. In this study, the gene encoding α-KGD from Synechococcus sp. PCC7002 was amplified and soluble expression of recombinant α-KGD was achieved by coexpressing with pTf16 chaperone plasmid in E. coli BL21 (DE3). Kinetic analysis showed that the activity of α-KGD was dependent on cofactors of thiamine pyrophosphate and divalent cation. Meanwhile this α-KGD was specific for α-ketoglutarate with respect to the decarboxylation activity despite of the pretty low activity of acetolactate synthase. The catalytic efficiency of α-KGD (the values of k_cat and k_cat/K_m for α-ketoglutarate were 1.2s^-1 and 6.3×10³M^-1s^-1, respectively) might provide evidence for its physiological role in TCA cycle of Synechococcus sp. PCC7002.

Engineering of Halomonas bluephagenesis for low cost production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) from glucose

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is one of the most promising biomaterials expected to be used in a wide range of scenarios. However, its large-scale production is still hindered by the high cost. Here we report the engineering of Halomonas bluephagenesis as a low-cost platform for non-sterile and continuous fermentative production of P(3HB-co-4HB) from glucose. Two interrelated 4-hydroxybutyrate (4HB) biosynthesis pathways were constructed to guarantee 4HB monomer supply for P(3HB-co-4HB) synthesis by working in concert with 3-hydroxybutyrate (3HB) pathway. Interestingly, only 0.17 mol% 4HB in the copolymer was obtained during shake flask studies. Pathway debugging using structurally related carbon source located the failure as insufficient 4HB accumulation. Further whole genome sequencing and comparative genomic analysis identified multiple orthologs of succinate semialdehyde dehydrogenase (gabD) that may compete with 4HB synthesis flux in H. bluephagenesis. Accordingly, combinatory gene-knockout strains were constructed and characterized, through which the molar fraction of 4HB was increased by 24-fold in shake flask studies. The best-performing strain was grown on glucose as the single carbon source for 60 h under non-sterile conditions in a 7-L bioreactor, reaching 26.3 g/L of dry cell mass containing 60.5% P(3HB-co-17.04 mol%4HB). Besides, 4HB molar fraction in the copolymer can be tuned from 13 mol% to 25 mol% by controlling the residual glucose concentration in the cultures. This is the first study to achieve the production of P(3HB-co-4HB) from only glucose using Halomonas.

Overexpression of bifunctional fructose-1,6-bisphosphatase/sedoheptulose-1,7-bisphosphatase leads to enhanced photosynthesis and global reprogramming of carbon metabolism in Synechococcus sp. PCC 7002

Cyanobacteria fix atmospheric CO₂ to biomass and through metabolic engineering can also act as photosynthetic factories for sustainable productions of fuels and chemicals. The Calvin Benson cycle is the primary pathway for CO₂ fixation in cyanobacteria, algae and C₃ plants. Previous studies have overexpressed the Calvin Benson cycle enzymes, ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) and bifunctional sedoheptulose-1,7-bisphosphatase/fructose-1,6-bisphosphatase (hereafter BiBPase), in both plants and algae, although their impacts on cyanobacteria have not yet been rigorously studied. Here, we show that overexpression of BiBPase and RuBisCO have distinct impacts on carbon metabolism in the cyanobacterium Synechococcus sp. PCC 7002 through physiological, biochemical, and proteomic analyses. The former enhanced growth, cell size, and photosynthetic O₂ evolution, and coordinately upregulated enzymes in the Calvin Benson cycle including RuBisCO and fructose-1,6-bisphosphate aldolase. At the same time it downregulated enzymes in respiratory carbon metabolism (glycolysis and the oxidative pentose phosphate pathway) including glucose-6-phosphate dehydrogenase (G6PDH). The content of glycogen was also significantly reduced while the soluble carbohydrate content increased. These results indicate that overexpression of BiBPase leads to global reprogramming of carbon metabolism in Synechococcus sp. PCC 7002, promoting photosynthetic carbon fixation and carbon partitioning towards non-storage carbohydrates. In contrast, whilst overexpression of RuBisCO had no measurable impact on growth and photosynthetic O₂ evolution, it led to coordinated increase in the abundance of proteins involved in pyruvate metabolism and fatty acid biosynthesis. Our results underpin that singular genetic modifications in the Calvin Benson cycle can have far broader cellular impact than previously expected. These features could be exploited to more efficiently direct carbons towards desired bioproducts.

Systematic Approaches to Efficiently Produce 2,3-Butanediol in a Marine Cyanobacterium

Cyanobacteria have attracted significant interest as a platform for renewable production of fuel and feedstock chemicals from abundant atmospheric carbon dioxide by way of photosynthesis. While great strides have been made in developing this technology in freshwater cyanobacteria, logistical issues remain in scale-up. Use of the cyanobacterium Synechococcus sp. PCC 7002 (7002) as a chemical production chassis could address a number of these issues given the higher tolerance to salt, light, and heat as well as the fast growth rate of 7002 in comparison to traditional model cyanobacteria such as Synechococcus elongatus PCC 7942 and Synechocystis sp. PCC 6803. However, despite growing interest, the development of genetic engineering tools for 7002 continues to lag behind those available for model cyanobacterial strains. In this work we demonstrate the systematic development of a 7002 production strain for the feedstock chemical 2,3-butanediol (23BD). We expand the range of tools available for use in 7002 by identifying and utilizing new integration sites for homologous recombination, demonstrating the inducibility of theophylline riboswitches, and screening a set of isopropyl β-d-1-thiogalactopyranoside (IPTG) inducible promoters. We then demonstrate improvements of 23BD production with the systematic screening of different conditions including: operon arrangement and copy number, light strength, inducer concentration, cell density at the time of induction, and nutrient concentration. Final production tests yielded titers of 1.6 g/L 23BD after 16 days at a rate of 100 mg/L/day. This work represents great strides in the development of 7002 as an industrially relevant production host.

Engineering Halomonas bluephagenesis TD01 for non-sterile production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate), short as P(3HB-co-4HB), was successfully produced by engineered Halomonas bluephagenesis TD01 grown in glucose and γ-butyrolactone under open non-sterile conditions. Gene orfZ encoding 4HB-CoA transferase of Clostridium kluyveri was integrated into the genome to achieve P(3HB-co-4HB) accumulation comparable to that of strains encoding orfZ on plasmids. Fed-batch cultivations conducted in 1-L and 7-L fermentors, respectively, resulted in over 70g/L cell dry weight (CDW) containing 63% P(3HB-co-12mol% 4HB) after 48h under non-sterile conditions. The processes were further scaled up in a 1000-L pilot fermentor to reach 83g/L CDW containing 61% P(3HB-co-16mol% 4HB) in 48h, with a productivity of 1.04g/L/h, again, under non-sterile conditions. The elastic P(3HB-co-16mol% 4HB) shows an elongation at break of 1022±43%. Results demonstrate that the engineered Halomonas bluephagenesis TD01 is a suitable industrial strain for large scale production under open non-sterile conditions.

Engineered microbial biosensors based on bacterial two-component systems as synthetic biotechnology platforms in bioremediation and biorefinery

Two-component regulatory systems (TCRSs) mediate cellular response by coupling sensing and regulatory mechanisms. TCRSs are comprised of a histidine kinase (HK), which serves as a sensor, and a response regulator, which regulates expression of the effector gene after being phosphorylated by HK. Using these attributes, bacterial TCRSs can be engineered to design microbial systems for different applications. This review focuses on the current advances in TCRS-based biosensors and on the design of microbial systems for bioremediation and their potential application in biorefinery.

Natural and Synthetic Variants of the Tricarboxylic Acid Cycle in Cyanobacteria: Introduction of the GABA Shunt into Synechococcus sp. PCC 7002

For nearly half a century, it was believed that cyanobacteria had an incomplete tricarboxylic acid (TCA) cycle, because 2-oxoglutarate dehydrogenase (2-OGDH) was missing. Recently, a bypass route via succinic semialdehyde (SSA), which utilizes 2-oxoglutarate decarboxylase (OgdA) and succinic semialdehyde dehydrogenase (SsaD) to convert 2-oxoglutarate (2-OG) into succinate, was identified, thus completing the TCA cycle in most cyanobacteria. In addition to the recently characterized glyoxylate shunt that occurs in a few of cyanobacteria, the existence of a third variant of the TCA cycle connecting these metabolites, the γ-aminobutyric acid (GABA) shunt, was considered to be ambiguous because the GABA aminotransferase is missing in many cyanobacteria. In this study we isolated and biochemically characterized the enzymes of the GABA shunt. We show that N-acetylornithine aminotransferase (ArgD) can function as a GABA aminotransferase and that, together with glutamate decarboxylase (GadA), it can complete a functional GABA shunt. To prove the connectivity between the OgdA/SsaD bypass and the GABA shunt, the gadA gene from Synechocystis sp. PCC 6803 was heterologously expressed in Synechococcus sp. PCC 7002, which naturally lacks this enzyme. Metabolite profiling of seven Synechococcus sp. PCC 7002 mutant strains related to these two routes to succinate were investigated and proved the functional connectivity. Metabolite profiling also indicated that, compared to the OgdA/SsaD shunt, the GABA shunt was less efficient in converting 2-OG to SSA in Synechococcus sp. PCC 7002. The metabolic profiling study of these two TCA cycle variants provides new insights into carbon metabolism as well as evolution of the TCA cycle in cyanobacteria.

Consequences of ccmR deletion on respiration, fermentation and H2 metabolism in cyanobacterium Synechococcus sp. PCC 7002

CcmR, a LysR-type transcriptional regulator, represses the genes encoding components of the high-affinity carbon concentration mechanism in cyanobacteria. Unexpectedly, deletion of the ccmR gene was found to alter the expression of the terminal oxidase and fermentative genes, especially the hydrogenase operon in the cyanobacterium Synechococcus sp. PCC 7002. Consistent with the transcriptomic data, the deletion strain exhibits flux increases (30-50%) in both aerobic O2 respiration and anaerobic H2 evolution. To understand how CcmR influences anaerobic metabolism, the kinetics of autofermentation were investigated following photoautotrophic growth. The autofermentative H2 yield increased by 50% in the CcmR deletion strain compared to the wild-type strain, and increased to 160% (within 20 h) upon continuous removal of H2 from the medium ("milking") to suppress H2 uptake. Consistent with this greater reductant flux to H2 , the mutant excreted less lactate during autofermentation (NAD(P)H consuming pathway). To enhance the rate of NADH production during anaerobic metabolism, the ccmR mutant was engineered to introduce GAPDH overexpression (more NADH production) and LDH deletion (less NADH consumption). The triple mutant (ccmR deletion + GAPDH overexpression + LDH deletion) showed 6-8-fold greater H2 yield than the WT strain, achieving conversion rates of 17 nmol 10(8)  cells(-1)  h(-1) and yield of 0.87 H2 per glucose equivalent (8.9% theoretical maximum). Simultaneous monitoring of the intracellular NAD(P)H concentration and H2 production rate by these mutants reveals an inverse correspondence between these variables indicating hydrogenase-dependent H2 production as a major sink for consuming NAD(P)H in preference to excretion of reduced carbon as lactate during fermentation. Biotechnol. Bioeng. 2016;113: 1448-1459. © 2015 Wiley Periodicals, Inc.