Engineering synthetic bacterial consortia for enhanced desulfurization and revalorization of oil sulfur compounds

Surface enhanced Raman spectroscopy for the characterization of the metabolites of the biodesulfurization of dibenzothiophene carried out by Tsukamurella paurometabola

Large amount of sulphur is released by the combustion of fossil fuels in the form of SoX which affects human health and leads to acid rain. To overcome this issue, it is essential to eliminate sulphur moieties from heterocyclic organo-sulphur compounds like Dibenzothiophene (DBT) present in the petrol. In this study Surface enhanced Raman scattering (SERS) spectroscopy is used to analyze the desulfurizing activity of Tsukamurella paurometabola bacterial strain. The most prominent SERS peaks observed at 791, 837, 944 and 1032 cm-1, associated to C-S stretching, are solely observed in dibenzothiophene and its metabolite-I (DBTS) but absent in 2-Hydroxybiphenyl (metabolite-II) and extraction sample of supernatant as a result of biodesulfurization. Moreover, the SERS peaks observed at 974 (characteristic peak of benzene ring) and 1015 cm-1 is associated to C-C ring breathing while 1642 and 1655 cm-1 assigned to CC bonds of aromatic ring. These peaks are only observed in 2-Hydroxybiphenyl (metabolite-II) and extraction sample of supernatant as a result of biodesulfurization. Notably, these peaks are absent in the Dibenzothiophene and its metabolite-I which indicate that aromatic ring is carrying sulfur in this fraction. Moreover, multivariate data analytical tools like principal component analysis (PCA) and PCA-loadings are applied to further differentiate between dibenzothiophene and its metabolites that are Dibenzothiophene sulphone (metabolite-I) and 2-Hydroxybiphenyl (metabolite-II).

De Novo Pterostilbene Production from Glucose Using Modular Coculture Engineering in Escherichia coli

Pterostilbene, a derivative of resveratrol, is of increasing interest due to its increased bioavailability and potential health benefits. Sustainable production of pterostilbene is important, especially given the challenges of traditional plant extraction and chemical synthesis methods. While engineered microbial cell factories provide a potential alternative for pterostilbene production, most approaches necessitate feeding intermediate compounds. To address these limitations, we adopted a modular coculture engineering strategy, dividing the pterostilbene biosynthetic pathway between two engineered E. coli strains. Using a combination of gene knockout, atmospheric and room-temperature plasma mutagenesis, and error-prone PCR-based whole genome shuffling to engineer strains for the coculture system, we achieved a pterostilbene production titer of 134.84 ± 9.28 mg/L from glucose using a 1:3 inoculation ratio and 0.1% dimethyl sulfoxide supplementation. This represents the highest reported de novo production titer. Our results underscore the potential of coculture systems and metabolic balance in microbial biosynthesis.

Mechanistic insights into sulfur source-driven physiological responses and metabolic reorganization in the fuel-biodesulfurizing Rhodococcus qingshengii IGTS8

Comparative proteomics and untargeted metabolomics were combined to study the physiological and metabolic adaptations of Rhodococcus qingshengii IGTS8 under biodesulfurization conditions. After growth in a chemically defined medium with either dibenzothiophene (DBT) or MgSO4 as the sulfur source, many differentially produced proteins and metabolites associated with several metabolic and physiological processes were detected including the metabolism of carbohydrates, amino acids, lipids, nucleotides, vitamins, protein synthesis, transcriptional regulation, cell envelope biogenesis, and cell division. Increased production of the redox cofactor mycofactocin and associated proteins was one of the most striking adaptations under biodesulfurization conditions. While most central metabolic enzymes were less abundant in the presence of DBT, a key enzyme of the glyoxylate shunt, isocitrate lyase, was up to 26-fold more abundant. Several C1 metabolism and oligotrophy-related enzymes were significantly more abundant in the biodesulfurizing culture. R. qingshengii IGTS8 exhibited oligotrophic growth in liquid and solid media under carbon starvation. Moreover, the oligotrophic growth was faster on the solid medium in the presence of DBT compared to MgSO4 cultures. In the DBT culture, the cell envelope and phospholipids were remodeled, with lower levels of phosphatidylethanolamine and unsaturated and short-chain fatty acids being the most prominent changes. Biodesulfurization increased the biosynthesis of osmoprotectants (ectoine and mannosylglycerate) as well as glutamate and induced the stringent response. Our findings reveal highly diverse and overlapping stress responses that could protect the biodesulfurizing culture not only from the associated sulfate limitation but also from chemical, oxidative, and osmotic stress, allowing efficient resource management. IMPORTANCE Despite decades of research, a commercially viable bioprocess for fuel desulfurization has not been developed yet. This is mainly due to lack of knowledge of the physiology and metabolism of fuel-biodesulfurizing bacteria. Being a stressful condition, biodesulfurization could provoke several stress responses that are not understood. This is particularly important because a thorough understanding of the microbial stress response is essential for the development of environmentally friendly and industrially efficient microbial biocatalysts. Our comparative systems biology studies provide a mechanistic understanding of the biology of biodesulfurization, which is crucial for informed developments through the rational design of recombinant biodesulfurizers and optimization of the bioprocess conditions. Our findings enhance the understanding of the physiology, metabolism, and stress response not only in biodesulfurizing bacteria but also in rhodococci, a precious group of biotechnologically important bacteria.

Biodesulfurization of Fossil Fuels: Analysis and Prospective

Biodesulfurization (BDS) of fossil fuels is a promising method for treating the high content of sulfur in crude oils and their derivatives in the future, attributed to its environmental-friendly nature and the technical efficient ability to desulfurize the organosulfur compounds recalcitrant on other techniques. It was found that the bioreaction rate depends on the treated fluid, targeting sulfur compounds, and the microorganism applied. Also, many studies investigated the operation conditions, specificity, and biocatalysts modification to develop BDS efficiency. Furthermore, mathematical kinetics models were formulated to represent the process. In this review, the previous studies are analyzed and discussed. This review article is characterized by a clear picture of all BDS's experimental, industrial, procedural, theoretical, and hypothetical points.

Spontaneously established syntrophic yeast communities improve bioproduction

Nutritional codependence (syntrophy) has underexplored potential to improve biotechnological processes by using cooperating cell types. So far, design of yeast syntrophic communities has required extensive genetic manipulation, as the co-inoculation of most eukaryotic microbial auxotrophs does not result in cooperative growth. Here we employ high-throughput phenotypic screening to systematically test pairwise combinations of auxotrophic Saccharomyces cerevisiae deletion mutants. Although most coculture pairs do not enter syntrophic growth, we identify 49 pairs that spontaneously form syntrophic, synergistic communities. We characterized the stability and growth dynamics of nine cocultures and demonstrated that a pair of tryptophan auxotrophs grow by exchanging a pathway intermediate rather than end products. We then introduced a malonic semialdehyde biosynthesis pathway split between different pairs of auxotrophs, which resulted in increased production. Our results report the spontaneous formation of stable syntrophy in S. cerevisiae auxotrophs and illustrate the biotechnological potential of dividing labor in a cooperating intraspecies community.

Advancing Desulfurization in the Model Biocatalyst Rhodococcus qingshengii IGTS8 via an In Locus Combinatorial Approach

Biodesulfurization poses as an ideal replacement to the high cost hydrodesulfurization of the recalcitrant heterocyclic sulfur compounds, such as dibenzothiophene (DBT) and its derivatives. The increasingly stringent limits on fuel sulfur content intensify the need for improved desulfurization biocatalysts, without sacrificing the calorific value of the fuel. Selective sulfur removal in a wide range of biodesulfurization strains, as well as in the model biocatalyst Rhodococcus qingshengii IGTS8, occurs via the 4S metabolic pathway that involves the dszABC operon, which encodes enzymes that catalyze the generation of 2-hydroxybiphenyl and sulfite from DBT. Here, using a homologous recombination process, we generate two recombinant IGTS8 biocatalysts, harboring native or rearranged, nonrepressible desulfurization operons, within the native dsz locus. The alleviation of sulfate-, methionine-, and cysteine-mediated dsz repression is achieved through the exchange of the native promoter P_dsz, with the nonrepressible P_kap1 promoter. The Dsz-mediated desulfurization from DBT was monitored at three growth phases, through HPLC analysis of end product levels. Notably, an 86-fold enhancement of desulfurization activity was documented in the presence of selected repressive sulfur sources for the recombinant biocatalyst harboring a combination of three targeted genetic modifications, namely, a dsz operon rearrangement, a native promoter exchange, and a dszA-dszB overlap removal. In addition, transcript level comparison highlighted the diverse effects of our genetic engineering approaches on dsz mRNA ratios and revealed a gene-specific differential increase in mRNA levels. IMPORTANCE Rhodococcus is perhaps the most promising biodesulfurization genus and is able to withstand the harsh process conditions of a biphasic biodesulfurization process. In the present work, we constructed an advanced biocatalyst harboring a combination of three genetic modifications, namely, an operon rearrangement, a promoter exchange, and a gene overlap removal. Our homologous recombination approach generated stable biocatalysts that do not require antibiotic addition, while harboring nonrepressible desulfurization operons that present very high biodesulfurization activities and are produced in simple and low-cost media. In addition, transcript level quantification validated the effects of our genetic engineering approaches on recombinant strains' dsz mRNA ratios and revealed a gene-specific differential increase in mRNA levels. Based on these findings, the present work can pave the way for further strain and process optimization studies that could eventually lead to an economically viable biodesulfurization process.

Bacterial Biological Factories Intended for the Desulfurization of Petroleum Products in Refineries

The removal of sulfur by deep hydrodesulfurization is expensive and environmentally unfriendly. Additionally, sulfur is not separated completely from heterocyclic poly-aromatic compounds. In nature, several microorganisms (Rhodococcus erythropolis IGTS8, Gordonia sp., Bacillus sp., Mycobacterium sp., Paenibacillus sp. A11-2 etc.) have been reported to remove sulfur from petroleum fractions. All these microbes remove sulfur from recalcitrant organosulfur compounds via the 4S pathway, showing potential for some organosulfur compounds only. Activity up to 100 µM/g dry cell weights is needed to meet the current demand for desulfurization. The present review describes the desulfurization capability of various microorganisms acting on several kinds of sulfur sources. Genetic engineering approaches on Gordonia sp. and other species have revealed a variety of good substrate ranges of desulfurization, both for aliphatic and aromatic organosulfur compounds. Whole genome sequence analysis and 4S pathway inhibition by a pTeR group inhibitor have also been discussed. Now, emphasis is being placed on how to commercialize the microbes for industrial-level applications by incorporating biodesulfurization into hydrodesulfurization systems. Thus, this review summarizes the potentialities of microbes for desulfurization of petroleum. The information included in this review could be useful for researchers as well as the economical commercialization of bacteria in petroleum industries.

Deciphering the biodesulfurization potential of two novel Rhodococcus isolates from a unique Greek environment

Sustainable biodesulfurization (BDS) processes require the use of microbial biocatalysts that display high activity against the recalcitrant heterocyclic sulfur compounds and can simultaneously withstand the harsh conditions of contact with petroleum products, inherent to any industrial biphasic BDS system. In this framework, the functional microbial BDS-related diversity in a naturally oil-exposed ecosystem, was examined through a 4,6-dimethyl-dibenzothiophene based enrichment process. Two new Rhodococcus sp. strains were isolated, which during a medium optimization process revealed a significantly enhanced BDS activity profile when compared to the model strain R. qingshengii IGTS8. In biocatalyst stability studies conducted in biphasic mode using partially hydrodesulfurized diesel under various process conditions, the new strains also presented an enhanced stability phenotype. In these studies, it was also demonstrated for all strains, that the BDS activity losses were decoupled from the overall cells' viability, in addition to the fact that the use of whole-broth biocatalyst positively affected BDS performance.

Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.

Enhancing biodesulfurization by engineering a synthetic dibenzothiophene mineralization pathway

A synthetic dibenzothiophene (DBT) mineralization pathway has been engineered in recombinant cells of Pseudomonas azelaica Aramco J strain for its use in biodesulfurization of thiophenic compounds and crude oil. This functional pathway consists of a combination of a recombinant 4S pathway responsible for the conversion of DBT into 2-hydroxybiphenyl (2HBP) and a 2HBP mineralization pathway that is naturally present in the parental P. azelaica Aramco J strain. This novel approach allows overcoming one of the major bottlenecks of the biodesulfurization process, i.e., the feedback inhibitory effect of 2HBP on the 4S pathway enzymes. Resting cells-based biodesulfurization assays using DBT as a sulfur source showed that the 2HBP generated from the 4S pathway is subsequently metabolized by the cell, yielding an increase of 100% in DBT removal with respect to previously optimized Pseudomonas putida biodesulfurizing strains. Moreover, the recombinant P. azelaica Aramco J strain was able to use DBT as a carbon source, representing the best characterized biocatalyst harboring a DBT mineralization pathway and constituting a suitable candidate to develop future bioremediation/bioconversion strategies for oil-contaminated sites.

Interplay between Sulfur Assimilation and Biodesulfurization Activity in Rhodococcus qingshengii IGTS8: Insights into a Regulatory Role of the Reverse Transsulfuration Pathway

Biodesulfurization is a process that selectively removes sulfur from dibenzothiophene and its derivatives. Several natural biocatalysts harboring the highly conserved desulfurization operon dszABC, which is significantly repressed by methionine, cysteine, and inorganic sulfate, have been isolated. However, the available information on the metabolic regulation of gene expression is still limited. In this study, scarless knockouts of the reverse transsulfuration pathway enzyme genes cbs and metB were constructed in the desulfurizing strain Rhodococcus sp. strain IGTS8. We provide sequence analyses and report the enzymes' involvement in the sulfate- and methionine-dependent repression of biodesulfurization activity. Sulfate addition in the bacterial culture did not repress the desulfurization activity of the Δcbs strain, whereas deletion of metB promoted a significant biodesulfurization activity for sulfate-based growth and an even higher desulfurization activity for methionine-grown cells. In contrast, growth on cysteine completely repressed the desulfurization activity of all strains. Transcript level comparison uncovered a positive effect of cbs and metB gene deletions on dsz gene expression in the presence of sulfate and methionine, but not cysteine, offering insights into a critical role of cystathionine β-synthase (CβS) and MetB in desulfurization activity regulation. IMPORTANCE Precise genome editing of the model biocatalyst Rhodococcus qingshengii IGTS8 was performed for the first time, more than 3 decades after its initial discovery. We thus gained insight into the regulation of dsz gene expression and biocatalyst activity, depending on the presence of two reverse transsulfuration enzymes, CβS and MetB. Moreover, we observed an enhancement of biodesulfurization capability in the presence of otherwise repressive sulfur sources, such as sulfate and l-methionine. The interconnection of cellular sulfur assimilation strategies was revealed and validated.

The Evolution of Microbial Facilitation: Sociogenesis, Symbiogenesis, and Transition in Individuality

Metabolic cooperation is widespread, and it seems to be a ubiquitous and easily evolvable interaction in the microbial domain. Mutual metabolic cooperation, like syntrophy, is thought to have a crucial role in stabilizing interactions and communities, for example biofilms. Furthermore, cooperation is expected to feed back positively to the community under higher-level selection. In certain cases, cooperation can lead to a transition in individuality, when freely reproducing, unrelated entities (genes, microbes, etc.) irreversibly integrate to form a new evolutionary unit. The textbook example is endosymbiosis, prevalent among eukaryotes but virtually lacking among prokaryotes. Concerning the ubiquity of syntrophic microbial communities, it is intriguing why evolution has not lead to more transitions in individuality in the microbial domain. We set out to distinguish syntrophy-specific aspects of major transitions, to investigate why a transition in individuality within a syntrophic pair or community is so rare. We review the field of metabolic communities to identify potential evolutionary trajectories that may lead to a transition. Community properties, like joint metabolic capacity, functional profile, guild composition, assembly and interaction patterns are important concepts that may not only persist stably but according to thought-provoking theories, may provide the heritable information at a higher level of selection. We explore these ideas, relating to concepts of multilevel selection and of informational replication, to assess their relevance in the debate whether microbial communities may inherit community-level information or not.

Characterization of a dszEABC operon providing fast growth on dibenzothiophene and construction of broad-host-range biodesulfurization catalysts

A new operon for biodesulfurization (BDS) of dibenzothiophene and derivatives has been isolated from a metagenomic library made from oil-contaminated soil, by selecting growth of E. coli on DBT as the sulfur source. This operon is similar to a dszEABC operon also isolated by metagenomic functional screening but exhibited substantial differences: (i) the new fosmid provides much faster growth on DBT; (ii) associated dszEABC genes can be expressed without the need of heterologous expression from the vector promoter; and (iii) monooxygenases encoded in the fosmid cannot oxidize indole to produce indigo. We show how expression of the new dszEABC operon is regulated by the sulfur source, being induced under sulfur-limiting conditions. Its transcription is activated by DszR, a type IV activator οf σ^N -dependent promoters. DszR is coded in a dszHR operon, whose transcription is in turn regulated by sulfur and presumably activated by the global regulator of sulfur metabolism CysB. Expression of dszH is essential for production of active DszR, although it is not involved in sulfur sensing or regulation. Two broad-host-range DBT biodesulfurization catalysts have been constructed and shown to provide DBT biodesulfurization capability to three Pseudomonas strains, displaying desirable characteristics for biocatalysts to be used in BDS processes.

Current Advances in the Biodegradation and Bioconversion of Polyethylene Terephthalate

Polyethylene terephthalate (PET) is a widely used plastic that is polymerized by terephthalic acid (TPA) and ethylene glycol (EG). In recent years, PET biodegradation and bioconversion have become important in solving environmental plastic pollution. More and more PET hydrolases have been discovered and modified, which mainly act on and degrade the ester bond of PET. The monomers, TPA and EG, can be further utilized by microorganisms, entering the tricarboxylic acid cycle (TCA cycle) or being converted into high value chemicals, and finally realizing the biodegradation and bioconversion of PET. Based on synthetic biology and metabolic engineering strategies, this review summarizes the current advances in the modified PET hydrolases, engineered microbial chassis in degrading PET, bioconversion pathways of PET monomers, and artificial microbial consortia in PET biodegradation and bioconversion. Artificial microbial consortium provides novel ideas for the biodegradation and bioconversion of PET or other complex polymers. It is helpful to realize the one-step bioconversion of PET into high value chemicals.

Targetron-Assisted Delivery of Exogenous DNA Sequences into Pseudomonas putida through CRISPR-Aided Counterselection

Genome editing methods based on group II introns (known as targetron technology) have long been used as a gene knockout strategy in a wide range of organisms, in a fashion independent of homologous recombination. Yet, their utility as delivery systems has typically been suboptimal due to the reduced efficiency of insertion when carrying exogenous sequences. We show that this limitation can be tackled and targetrons can be adapted as a general tool in Gram-negative bacteria. To this end, a set of broad-host-range standardized vectors were designed for the conditional expression of the Ll.LtrB intron. After establishing the correct functionality of these plasmids in Escherichia coli and Pseudomonas putida, we created a library of Ll.LtrB variants carrying cargo DNA sequences of different lengths, to benchmark the capacity of intron-mediated delivery in these bacteria. Next, we combined CRISPR/Cas9-facilitated counterselection to increase the chances of finding genomic sites inserted with the thereby engineered introns. With these novel tools, we were able to insert exogenous sequences of up to 600 bp at specific genomic locations in wild-type P. putida KT2440 and its ΔrecA derivative. Finally, we applied this technology to successfully tag P. putida with an orthogonal short sequence barcode that acts as a unique identifier for tracking this microorganism in biotechnological settings. These results show the value of the targetron approach for the unrestricted delivery of small DNA fragments to precise locations in the genomes of Gram-negative bacteria, which will be useful for a suite of genome editing endeavors.

Synthetically engineered microbial scavengers for enhanced bioremediation

Microbial bioremediation has gained attention as a cheap, efficient, and sustainable technology to manage the increasing environmental pollution. Since microorganisms in nature are not evolved to degrade pollutants, there is an increasing demand for developing safer and more efficient pollutant-scavengers for enhanced bioremediation. In this review, we introduce the strategies and technologies developed in the field of synthetic biology and their applications to the construction of microbial scavengers with improved efficiency of biodegradation while minimizing the impact of genetically engineered microbial scavengers on ecosystems. In addition, we discuss recent achievements in the biodegradation of fastidious pollutants, greenhouse gases, and microplastics using engineered microbial scavengers. Using synthetic microbial scavengers and multidisciplinary technologies, toxic pollutants could be more easily eliminated, and the environment could be more efficiently recovered.

Nanocatalysts for Oxidative Desulfurization of Liquid Fuel: Modern Solutions and the Perspectives of Application in Hybrid Chemical-Biocatalytic Processes

In this paper, the current advantages and disadvantages of using metal-containing nanocatalysts (NCs) for deep chemical oxidative desulfurization (ODS) of liquid fuels are reviewed. A similar analysis is performed for the oxidative biodesulfurization of oil along the 4S-pathway, catalyzed by various aerobic bacterial cells of microorganisms. The preferences of using NCs for the oxidation of organic sulfur-containing compounds in various oil fractions seem obvious. The text discusses the development of new chemical and biocatalytic approaches to ODS, including the use of both heterogeneous NCs and anaerobic microbial biocatalysts that catalyze the reduction of chemically oxidized sulfur-containing compounds in the framework of methanogenesis. The addition of anaerobic biocatalytic stages to the ODS of liquid fuel based on NCs leads to the emergence of hybrid technologies that improve both the environmental characteristics and the economic efficiency of the overall process. The bioconversion of sulfur-containing extracts from fuels with accompanying hydrocarbon residues into biogas containing valuable components for the implementation of C-1 green chemistry processes, such as CH4, CO2, or H2, looks attractive for the implementation of such a hybrid process.

Syntrophic co-culture of a methanotroph and heterotroph for the efficient conversion of methane to mevalonate

As the bioconversion of methane becomes increasingly important for bio-industrial and environmental applications, methanotrophs have received much attention for their ability to convert methane under ambient conditions. This includes the extensive reporting of methanotroph engineering for the conversion of methane to biochemicals. To further increase methane usability, we demonstrated a highly flexible and efficient modular approach based on a synthetic consortium of methanotrophs and heterotrophs mimicking the natural methane ecosystem to produce mevalonate (MVA) from methane. In the methane-conversion module, we used Methylococcus capsulatus Bath as a highly efficient methane biocatalyst and optimized the culture conditions for the production of high amounts of organic acids. In the MVA-synthesis module, we used Escherichia coli SBA01, an evolved strain with high organic acid tolerance and utilization ability, to convert organic acids to MVA. Using recombinant E. coli SBA01 possessing genes for the MVA pathway, 61 mg/L (0.4 mM) of MVA was successfully produced in 48 h without any addition of nutrients except methane. Our platform exhibited high stability and reproducibility with regard to cell growth and MVA production. We believe that this versatile system can be easily extended to many other value-added processes and has a variety of potential applications.

Recent Advances in the Physicochemical Properties and Biotechnological Application of Vitreoscilla Hemoglobin

Vitreoscilla hemoglobin (VHb), the first discovered bacterial hemoglobin, is a soluble heme-binding protein with a faster rate of oxygen dissociation. Since it can enhance cell growth, product synthesis and stress tolerance, VHb has been widely applied in the field of metabolic engineering for microorganisms, plants, and animals. Especially under oxygen-limited conditions, VHb can interact with terminal oxidase to deliver enough oxygen to achieve high-cell-density fermentation. In recent years, with the development of bioinformatics and synthetic biology, several novel physicochemical properties and metabolic regulatory effects of VHb have been discovered and numerous strategies have been utilized to enhance the expression level of VHb in various hosts, which greatly promotes its applications in biotechnology. Thus, in this review, the new information regarding structure, function and expressional tactics for VHb is summarized to understand its latest applications and pave a new way for the future improvement of biosynthesis for other products.

Orientin and vitexin production by a one-pot enzymatic cascade of a glycosyltransferase and sucrose synthase

Orientin and vitexin, important components of bamboo-leaf extracts, are C-glycosylflavones which exhibit a number of interesting biological properties. In this work, we developed an efficient biocatalytic cascade for orientin and vitexin production consisting of Trollius chinensis C-glycosyltransferase (TcCGT) and Glycine max sucrose synthase (GmSUS). In order to relieve the bottleneck of the biocatalytic cascade, the biocatalytic efficiency, reaction condition compatibilities and the ratio of the enzymes were determined. We found that the specific activity of TcCGT was significantly influenced by enzyme dose and Triton X-100 or Tween 20 (0.2%). Co-culture of BL21-TcCGT-Co and BL21-GmSUS-Co affected the catalytic efficiency of TcCGT and GmSUS, and the maximum orientin production rate reached 47 μM/min at the inoculation ratio of 9:1. The optimal pH and temperature for the biocatalytic cascade were pH 7.5 and 30 °C, respectively. Moreover, the high dose of the enzymes can improve the tolerance of biocatalytic cascade to substrate inhibition in the one-pot reaction. By using a fed-batch strategy, maximal titers of orientin and vitexin reached 7090 mg/L with a corresponding molar conversion of 98.7% and 5050 mg/L with a corresponding molar conversion of 97.3%, respectively, which is the highest titer reported to date. Therefore, the method described herein for efficient production of orientin and vitexin by modulating catalytic efficiencies of enzymes can be widely used for the C-glycosylation of flavonoids.

Modular optimization in metabolic engineering

There is an increasing demand for bioproducts produced by metabolically engineered microbes, such as pharmaceuticals, biofuels, biochemicals and other high value compounds. In order to meet this demand, modular optimization, the optimizing of subsections instead of the whole system, has been adopted to engineer cells to overproduce products. Research into modularity has focused on traditional approaches such as DNA, RNA, and protein-level modularity of intercellular machinery, by optimizing metabolic pathways for enhanced production. While research into these traditional approaches continues, limitations such as scale-up and time cost hold them back from wider use, while at the same time there is a shift to more novel methods, such as moving from episomal expression to chromosomal integration. Recently, nontraditional approaches such as co-culture systems and cell-free metabolic engineering (CFME) are being investigated for modular optimization. Co-culture modularity looks to optimally divide the metabolic burden between different hosts. CFME seeks to modularly optimize metabolic pathways in vitro, both speeding up the design of such systems and eliminating the issues associated with live hosts. In this review we will examine both traditional and nontraditional approaches for modular optimization, examining recent developments and discussing issues and emerging solutions for future research in metabolic engineering.

Bacterial extracellular matrix as a natural source of biotechnologically multivalent materials

The extracellular matrix (ECM) is an intricate megastructure made by bacterial cells to form architecturally complex biostructures called biofilms. Protection of cells, modulation of cell-to-cell signalling, cell differentiation and environmental sensing are functions of the ECM that reflect its diverse chemical composition. Proteins, polysaccharides and eDNA have specific functionalities while cooperatively interacting to sustain the architecture and biological relevance of the ECM. The accumulated evidence on the chemical heterogeneity and specific functionalities of ECM components has attracted attention because of their potential biotechnological applications, from agriculture to the water and food industries. This review compiles information on the most relevant bacterial ECM components, the biophysical and chemical features responsible for their biological roles, and their potential to be further translated into biotechnological applications.

One-pot synthesis of 6-aminohexanoic acid from cyclohexane using mixed-species cultures

6-Aminohexanoic acid (6AHA) is a vital polymer building block for Nylon 6 production and an FDA-approved orphan drug. However, its production from cyclohexane is associated with several challenges, including low conversion and yield, and severe environmental issues. We aimed at overcoming these challenges by developing a bioprocess for 6AHA synthesis. A mixed-species approach turned out to be most promising. Thereby, Pseudomonas taiwanensis VLB120 strains harbouring an upstream cascade converting cyclohexane to either є-caprolactone (є-CL) or 6-hydroxyhexanoic acid (6HA) were combined with Escherichia coli JM101 strains containing the corresponding downstream cascade for the further conversion to 6AHA. ε-CL was found to be a better 'shuttle molecule' than 6HA enabling higher 6AHA formation rates and yields. Mixed-species reaction performance with 4 g l-1 biomass, 10 mM cyclohexane, and an air-to-aqueous phase ratio of 23 combined with a repetitive oxygen feeding strategy led to complete substrate conversion with 86% 6AHA yield and an initial specific 6AHA formation rate of 7.7 ± 0.1 U gCDW -1 . The same cascade enabled 49% 7-aminoheptanoic acid yield from cycloheptane. This combination of rationally engineered strains allowed direct 6AHA production from cyclohexane in one pot with high conversion and yield under environmentally benign conditions.

Elevated c-di-GMP levels promote biofilm formation and biodesulfurization capacity of Rhodococcus erythropolis

Bacterial biofilms provide high cell density and a superior adaptation and protection from stress conditions compared to planktonic cultures, making them a very promising approach for bioremediation. Several Rhodococcus strains can desulfurize dibenzothiophene (DBT), a major sulphur pollutant in fuels, reducing air pollution from fuel combustion. Despite multiple efforts to increase Rhodococcus biodesulfurization activity, there is still an urgent need to develop better biocatalysts. Here, we implemented a new approach that consisted in promoting Rhodococcus erythropolis biofilm formation through the heterologous expression of a diguanylate cyclase that led to the synthesis of the biofilm trigger molecule cyclic di-GMP (c-di-GMP). R. erythropolis biofilm cells displayed a significantly increased DBT desulfurization activity when compared to their planktonic counterparts. The improved biocatalyst formed a biofilm both under batch and continuous flow conditions which turns it into a promising candidate for the development of an efficient bioreactor for the removal of sulphur heterocycles present in fossil fuels.

Oil biodesulfurization: A review of applied analytical techniques

The wide use of fossil fuels and their associated environmental concerns, highlighted the importance of affordable and clean energy (goal 7), as adopted by the Sustainable Development Goals of the United Nations for 2030. For years now, the detection of sulfur components in liquid fuels is performed mainly for environmental and health purposes in compliance with the respective legislations. Towards this, the aerobic and anaerobic biodesulfurization (BDS) process, which entails the use of microorganisms to limit the sulfur concentration is followed. To ensure effective BDS, several traditional analytical methods are utilized, although they require bench-top, bulky, costly, and time-consuming instruments along with skilled personnel. The currently employed analytical methods are mostly chromatographic techniques (e.g. liquid and gas) coupled with various detectors. To start with, high-performance liquid chromatography with ultraviolet detector (HPLC-UV), as well as electrospray ionization-LC-mass spectrometry (ESI-LC-MS) were mostly reported. Additionally, many detectors were coupled to gas chromatography (CG) including atomic emission detector (GC-AED), flame ionization detector (GC-FID), flame photometric detector (GC-FPD), sulfur fluorescence detector (GC-SFD), mass selective detector (GC-MS), etc. The solid-phase microextraction (SPME) technique provides extra capabilities when added to the separation techniques. Towards the continuous interest in oil supercomplex synthesis, other atmospheric and surface desorption ionization techniques, as well as the multidimensional 2D chromatographic systems (GC × GC and LC × LC) were also investigated, due to their unsurpassed resolution power. The current review ends with final remarks per applied methodology and the necessity to respect and protect the human environment and life.

Biodesulfurization of refractory sulfur compounds in petro-diesel by a novel hydrocarbon tolerable strain Paenibacillus glucanolyticus HN4

One of the main precursors of air pollution and acid rains is the presence of the recalcitrant thiophenic compounds, for example dibenzothiophene (DBT) and its derivatives in transportation fuels. In an attempt to achieve the worldwide regulations of ultra-low sulfur transportation fuels without affecting its hydrocarbon skeleton, a biphasic medium containing 100 mg/L DBT dissolved in n-hexadecane (1/4 oil/water v/v) used for enrichment and isolation of selective biodesulfurizing bacterium from an oil-polluted sediment sample collected from Egyptian Red Sea shoreline. The isolated bacterium is facultative anaerobe, motile, spore-former, and mesophile. It is genetically identified as Paenibacillus glucanolyticus strain HN4 (NCBI Gene Bank Accession No. MT645230). HN4 desulfurized DBT as a model of the recalcitrant thiophenic compounds without affecting its hydrocarbon skeleton via the 4S-pathway producing 2-hydroxybiphenyl (2-HBP) as a dead end product. HN4 substantiated to be a hydrocarbon tolerant, biosurfactants(s) producer, and endorsed unique enzymatic system capable of desulfurizing broad range of thiophenic compounds and expressed an efficient desulfurization activity against the recalcitrant alkylated DBTs. As far our knowledge, it is the first reported BDS study using P. glucanolyticus. Statistical optimization based on One-Factor-At-A-Time (OFAT) technique and response surface methodology (RSM) applied for elucidation of mathematical model correlations describing and optimizing the effect of different physicochemical parameters on batch biphasic BDS process. That illustrated an approximate increase in BDS efficiency by 1.34 fold and recorded 94% sulfur removal in biphasic batch process at optimum operation conditions of 120 h, 0.14 wt% S-content model oil (DBT dissolved in n-hexadecane), 33.5 °C, pH7 and 1/1 oil/water phase ratio, and 147 rpm. Resting cells of HN4 in a biphasic reactor (1/1 v/v) decreased the sulfur content of a refractory thiophenic model oil (thiophene, benzothiophene, DBT, and alkylated DBT dissolved in n-hexadecane) from 0.14 to 0.027 wt%, and petro-diesel from 0.2 to 0.04 wt%, within 120 h, keeping the calorific value of the treated fuel intact. Consequently, that novel strain could be recommended as a promising candidate for BDS as complementary to hydrodesulfurization process in oil refinery.

Combining co-culturing of Paenibacillus strains and Vitreoscilla hemoglobin expression as a strategy to improve biodesulfurization

Enhancement of the desulfurization activities of Paenibacillus strains 32O-W and 32O-Y were investigated using dibenzothiophene (DBT) and DBT sulfone (DBTS) as sources of sulphur in growth experiments. Strains 32O-W, 32O-Y and their co-culture (32O-W plus 32O-Y), and Vitreoscilla hemoglobin (VHb) expressing recombinant strain 32O-Yvgb and its co-culture with strain 32O-W were grown at varying concentrations (0·1-2 mmol l^-1 ) of DBT or DBTS for 96 h, and desulfurization measured by production of 2-hydroxybiphenyl (2-HBP) and disappearance of DBT or DBTS. Of the four cultures grown with DBT as sulphur source, the best growth occurred for the 32O-Yvgb plus 32O-W co-culture at 0·1 and 0·5 mmol l^-1 DBT. Although the presence of vgb provided no consistent advantage regarding growth on DBTS, strain 32O-W, as predicted by previous work, was shown to contain a partial 4S desulfurization pathway allowing it to metabolize this 4S pathway intermediate.

Diesel-born organosulfur compounds stimulate community re-structuring in a diesel-biodesulfurizing consortium

We enriched and characterized a biodesulfurizing consortium (designated as MG1). The MG1 consortium reduced the total sulfur of diesel by 25 % and utilized each of the diesel-born compounds dibenzothiophene (DBT), benzothiophene (BT), 4-methyldibenzothiophene (4-MDBT) and 4, 6-dimethyldibenzothiophene (4, 6-DMDBT) as a sole sulfur source. MiSeq analysis revealed compositional shifts in the MG1 community according to the type of the sulfur source. A DBT-grown MG1 culture had Klebsiella, Pseudomonas, Rhodococcus and Sphingomonas as the most abundant genera. When diesel or 4, 6-DMDBT was provided as a sole sulfur source, Klebsiella and Pseudomonas spp. were the most abundant. In the BT culture, Rhodococcus spp. were the key biodesulfurizers, while Klebsiella, Pseudomonas and Sphingomonas spp. dominated the 4-MDBT-grown consortium. MG1 also utilized 2-hydroxybiphenyl (the product of the 4S biodesulfurization pathway) where Pseudomonas spp. uniquely dominated the consortium. The data improves our understanding of the sulfur source-driven structural adaptability of biodesulfurizing consortia.

Exploring the synthetic biology potential of bacteriophages for engineering non-model bacteria

Non-model bacteria like Pseudomonas putida, Lactococcus lactis and other species have unique and versatile metabolisms, offering unique opportunities for Synthetic Biology (SynBio). However, key genome editing and recombineering tools require optimization and large-scale multiplexing to unlock the full SynBio potential of these bacteria. In addition, the limited availability of a set of characterized, species-specific biological parts hampers the construction of reliable genetic circuitry. Mining of currently available, diverse bacteriophages could complete the SynBio toolbox, as they constitute an unexplored treasure trove for fully adapted metabolic modulators and orthogonally-functioning parts, driven by the longstanding co-evolution between phage and host.

Prediction of critical properties of sulfur-containing compounds: New QSPR models

In this study, new models have been proposed for the prediction of different critical properties (critical temperature (T_C), critical pressure (P_C), critical volume (V_C), and acentric factor (ω)) of the sulfur-containing compounds based on quantitative structure-property relationship (QSPR). An extensive data set containing experimental data of over 130 different sulfur-containing compounds was employed. Enhanced Replacement Method (ERM) was applied for subset variable selection. Based on ERM selected descriptors, two different models, including linear model and genetic programming (GP) based non-linear model have been proposed for each critical property. The predicted values of each target were in good agreement with the experimental data. For GP-based models, the values of the coefficient of determination (R²) were 0.936, 0.976, 0.990, and 0.917 for T_C, P_C, V_C, and ω, respectively. After revisiting the available QSPR models, it was found that the domain of applicability of new models has been expanded.

Conventional genetic manipulation of desulfurizing bacteria and prospects of using CRISPR-Cas systems for enhanced desulfurization activity

Highly active and stable biocatalysts are the prerequisite for industrial scale application of the biodesulfurization process. Scientists are making efforts for increasing the desulfurizing activity of native strains by employing various genetic engineering approaches. Nevertheless, the achieved desulfurization rate is lower than the industrial requirements. Thus, there is a dire need to use efficient genetic tools for precise genome editing of desulfurizing bacteria for enhanced efficiency. In comparison to the previously used genetic engineering tools the newly developed CRISPR-Cas is a more efficient and simple genetic tool that has been successfully applied for targeted genome modification of eukaryotes as well as prokaryotes. In this paper, we have reviewed the approaches, previously used to enhance the biodesulfurization rates of the sulfur metabolizing microorganisms and have discussed the potential of CRISPR-Cas systems in engineering desulfurizing biocatalysts. We have also proposed a model to construct competent desulfurizing recombinants involving use of CRISPR-Cas technology. The model can be used to over-express the dsz genes under a constitutive promoter in a suitable heterologous host, to get a steady expression of desulfurization pathway. This may serve as an inducement to develop better performing desulfurizing recombinant strains using CRISPR-Cas systems, which can be helpful in increasing the rate of biodesulfurization in future.

Enhancing the substrate tolerance of DszC by a combination of alanine scanning and site-directed saturation mutagenesis

The biodesulfurization 4S pathway can specifically desulfurize an aromatic S heterocyclic compound (which is difficult to desulfurize by hydrodesulfurization) and maintain the integrity of its combustion value. The four Dsz enzymes in the pathway convert the model compound dibenzothiophene (DBT) into the sulfur-free compound 2-hydroxybiphenyl (HBP). DszC is the first enzyme in the 4S pathway and is subject to feedback inhibition and substrate inhibition. This study is the first attempt to further modify the DszC mutant AKWC to improve its tolerance to DBT. Alanine scanning was performed on the dimeric surface of the DszC mutant AKWC, and the HBP yield of the BAD (AKWCP413A) strain was increased compared to the BAD (AKWC) strain. Site-directed saturation mutagenesis was performed on the 413th amino acid of AKWC, and the substrate inhibition parameter K_I value of the mutant AKWCPI was 5.6 times higher than that of AKWC. When the DBT concentration was 0.25 mM, the HBP production of the recombinant strain overexpressing AKWCPI was increased by approximately 1.4-fold compared to the BL21(DE3)/BADC*+C* strain. The protein engineering of DszC further improved the substrate tolerance after overcoming the feedback inhibition, which provided a reference for the analysis of the inhibition mechanism of DszC substrate. Overexpression of DszC-beneficial mutants also greatly improved the efficiency of desulfurization.

A novel spectrophotometric method for simultaneous estimation of dibenzothiophene and 2-hydroxybiphenyl in their mixed spectrum and its application in screening of specific biodesulfurizing microbes

The desulfurization of fuel is currently enforced to meet environmental legislation and prevent pollution. The use of specific biodesulfurizing microbes with a unique 4S pathway allows the desulfurization without compromising the quality of fuel. These specific microbes can be screened by the detection of 2-hydroxybiphenol (2-HBP) in desulfurizing mixture of dibenzothiophene (DBT). At present, colorimetric Gibb's assay is the most commonly employed screening method which requires a specific reagent, i.e., 2,6-dichloroquninone-4-chloramide. In the present study, a novel and simple spectrophotometric method was developed for the detection of 2-HBP for screening purpose based on dual wavelength method. The developed method facilitates the simultaneous analysis of DBT desulfurization and 2-HBP production in a sample by merely measuring the absorbance differences at two specified wavelengths, i.e., ΔA (λ ₃₂₀-λ ₂₄₇) for DBT and ΔA (λ ₂₈₆-λ ₃₂₄) for 2-HBP. The developed method was used to screen 57 microbes and two specific desulfurizing microbes Bacillus flexus MS-5 and Bacillus cereus BR-31 were selected based on 2-HBP production. The outcomes of developed method were validated by HPLC analysis. The strains MS-5 and BR-31 were employed in biodesulfurization and resulted in 54.88 ± 1.12% and 55.72 ± 1.32% desulfurization of 1.0 mM DBT, respectively. The developed method for screening of specific desulfurizing microbes does not require any specific reagent or sophisticated instrument in spite of being quick and reliable. The microbes selected by developed method exhibited excellent potential for biodesulfurization of fuel.

A kinetic model to optimize and direct the dose ratio of Dsz enzymes in the 4S desulfurization pathway in vitro and in vivo

OBJECTIVE

To enhance the biodesulfurization rate using a kinetic model that directs the ratio of Dsz enzymes.

RESULTS

This study established a kinetic model that predicted the optimal ratio of Dsz enzymes in the 4S biodesulfurization system to be A:B:C = 1:2:4 and 1:4:2. When BCAD+1A+4B+2C, the conversion rate of dibenzothiophene (DBT) to 2-hydroxybiphenyl (HBP) was close to 100% in vitro. When the gene dose of dszC was increased, the HBP yield of the recombinant strain BL21(DE3)/BCAD + C reached approximately 0.012 mM in vivo, which was approximately 6-fold higher than that of the BCAD strain.

CONCLUSIONS

According to the results predicted by the enzyme kinetic model, maintaining higher concentrations of DszC and DszB in the desulfurization system can effectively improve the desulfurization efficiency.

Comparative transcriptomic analysis revealed the key pathways responsible for organic sulfur removal by thermophilic bacterium Geobacillus thermoglucosidasius W-2

Biodesulfurization is a promising method to desulfurize sulfur-containing compounds in oil with its unique advantages, such as environment-friendly treatments and moderate reaction conditions. In this study, a thermophilic bacterium Geobacillus thermoglucosidasius W-2 was reported to show nearly 40% and 55% desulfurization rates on heavy oil with 2.81% and 0.46% initial total sulfur content, respectively. Subsequently, comparative transcriptome analysis indicated that several possible key desulfurization-related genes of this strain were found to be differentially up-regulated induced by benzothiophene and dibenzothiophene, respectively. These desulfurization-related genes were considered to conduct key step to convert organic sulfur to inorganic sulfur. Moreover, the characterization of thermophilic alkanesulfonate monooxygenase systems SsuD₁/SsuE₁ and SsuD₂/SsuE₂ revealed that the enzymes exhibit considerable thermal and pH stability and wide substrates applicability. These enzymes probably endowed the strain W-2 with the ability to desulfurize oil and eliminate the sulfur-containing surfactants. Thus, this study provides novel alkanesulfonate monooxygenase systems that have the application potential for heavy oil biodesulfurization, oil demulsification and other biocatalytic processes.

Cell Factory Engineering

Rational approaches to modifying cells to make molecules of interest are of substantial economic and scientific interest. Most of these efforts aim at the production of native metabolites, expression of heterologous biosynthetic pathways, or protein expression. Reviews of these topics have largely focused on individual strategies or cell types, but collectively they fall under the broad umbrella of a growing field known as cell factory engineering. Here we condense >130 reviews and key studies in the art into a meta-review of cell factory engineering. We identified 33 generic strategies in the field, all applicable to multiple types of cells and products, and proven successful in multiple major cell types. These apply to three major categories: production of native metabolites and/or bioactives, heterologous expression of biosynthetic pathways, and protein expression. This meta-review provides general strategy guides for the broad range of applications of rational engineering of cell factories.

Improved Efficiency of the Desulfurization of Oil Sulfur Compounds in Escherichia coli Using a Combination of Desensitization Engineering and DszC Overexpression

The 4S pathway of biodesulfurization, which can specifically desulfurize aromatic S-heterocyclic compounds without destroying their combustion value, is a low-cost and environmentally friendly technology that is complementary to hydrodesulfurization. The four Dsz enzymes convert the model compound dibenzothiophene (DBT) into the sulfur-free compound 2-hydroxybiphenyl (HBP). Of these four enzymes, DszC, the first enzyme in the 4S pathway, is the most severely affected by the feedback inhibition caused by HBP. This study is the first attempt to directly modify DszC to decrease its inhibition by HBP, with the results showing that the modified protein is insensitive to HBP. On the basis of the principle that the final HBP product could show a blue color with Gibbs reagent, a high-throughput screening method for its rapid detection was established. The screening method and the combinatorial mutagenesis generated the mutant AKWC (A101K/W327C) of DszC. After the IC₅₀ was calculated, the feedback inhibition of the AKWC mutant was observed to have been substantially reduced. Interestingly, the substrate inhibition of DszC had also been reduced as a result of directed evolution. Finally, the recombinant BL21(DE3)/BADC*+C* (C* represents AKWC) strain exhibited a specific conversion rate of 214.84 μmol_HBP/g_DCW/h, which was 13.8-fold greater than that of the wild-type strain. Desensitization engineering and the overexpression of the desensitized DszC protein resulted in the elimination of the feedback inhibition bottleneck in the 4S pathway, which is practical and effective progress toward the production of sulfur-free fuel oil. The results of this study demonstrate the utility of desensitization of feedback inhibition regulation in metabolic pathways by protein engineering.

Advances in the development and application of microbial consortia for metabolic engineering

Recent advances in metabolic engineering enable the production of high-value chemicals via expressing complex biosynthetic pathways in a single microbial host. However, many engineered strains suffer from poor product yields due to redox imbalance and excess metabolic burden, and require compartmentalization of the pathway for optimal function. To address this problem, significant developments have been made towards co-cultivation of more than one engineered microbial strains to distribute metabolic burden between the co-cultivation partners and improve the product yield. In this emerging approach, metabolic pathway modules can be optimized separately in suitable hosts that will then be combined to enable optimal functionality of the complete pathway. This modular approach broadens the possibilities to fine tune sophisticated production platforms and thus achieve the biosynthesis of very complex compounds.

Here, we review the different applications and the overall potential of natural and artificial co-cultivation systems in metabolic engineering in order to improve bioproduction/bioconversion. In addition to the several advantages over monocultures, major challenges and opportunities associated with co-cultivation are also discussed in this review.

•

Benefits of using co-cultivation system in metabolic engineering.

•

Existence of natural consortia and their application.

•

Recent advancement in co-cultivation methodology for bioproductions.

•

Challenges in implementing microbial consortia for microbial biosynthesis.

Genome-Wide Analysis of Transcriptional Changes and Genes That Contribute to Fitness during Degradation of the Anthropogenic Pollutant Pentachlorophenol by Sphingobium chlorophenolicum

Pentachlorophenol (PCP) is a highly toxic pesticide that was first introduced in the 1930s. The alphaproteobacterium Sphingobium chlorophenolicum, which was isolated from PCP-contaminated sediment, has assembled a metabolic pathway capable of completely degrading PCP. This pathway produces four toxic intermediates, including a chlorinated benzoquinone that is a potent alkylating agent and three chlorinated hydroquinones that react with O2 to produce reactive oxygen species (ROS). RNA-seq analysis revealed that PCP causes a global stress response that resembles responses to proton motive force uncoupling and membrane disruption, while surprisingly, little of the response resembles the responses expected to be produced by the PCP degradation intermediates. Tn-seq was used to identify genes important for fitness in the presence of PCP. By comparing the genes that are important for fitness in wild-type S. chlorophenolicum and a non-PCP-degrading mutant, we identified genes that are important only when the PCP degradation intermediates are produced. These include genes encoding two enzymes that are likely to be involved in protection against ROS. In addition to these enzymes, the endogenous levels of other enzymes that protect cells from oxidative stress appear to mitigate the toxic effects of the chlorinated benzoquinone and hydroquinone metabolites of PCP. The combination of RNA-seq and Tn-seq results identify important mechanisms for defense against the toxicity of PCP. IMPORTANCE Phenolic compounds such as pentachlorophenol (PCP), triclosan, and 2,4-dichlorophenoxyacetic acid (2,4-D) represent a common class of anthropogenic biocides. Despite the novelty of these compounds, many can be degraded by microbes isolated from contaminated sites. However, degradation of this class of chemicals often generates toxic intermediates, which may contribute to their recalcitrance to biodegradation. We have addressed the stresses associated with degradation of PCP by Sphingobium chlorophenolicum by examining the transcriptional response after PCP exposure and identifying genes necessary for growth during both exposure to and degradation of PCP. This work identifies some of the mechanisms that protect cells from this toxic compound and facilitate its degradation. This information could be used to engineer strains capable of improved biodegradation of PCP or similar phenolic pollutants.

Metabolic and process engineering for biodesulfurization in Gram-negative bacteria

Microbial desulfurization or biodesulfurization (BDS) is an attractive low-cost and environmentally friendly complementary technology to the hydrotreating chemical process based on the potential of certain bacteria to specifically remove sulfur from S-heterocyclic compounds of crude fuels that are recalcitrant to the chemical treatments. The 4S or Dsz sulfur specific pathway for dibenzothiophene (DBT) and alkyl-substituted DBTs, widely used as model S-heterocyclic compounds, has been extensively studied at the physiological, biochemical and genetic levels mainly in Gram-positive bacteria. Nevertheless, several Gram-negative bacteria have been also used in BDS because they are endowed with some properties, e.g., broad metabolic versatility and easy genetic and genomic manipulation, that make them suitable chassis for systems metabolic engineering strategies. A high number of recombinant bacteria, many of which are Pseudomonas strains, have been constructed to overcome the major bottlenecks of the desulfurization process, i.e., expression of the dsz operon, activity of the Dsz enzymes, retro-inhibition of the Dsz pathway, availability of reducing power, uptake-secretion of substrate and intermediates, tolerance to organic solvents and metals, and other host-specific limitations. However, to attain a BDS process with industrial applicability, it is necessary to apply all the knowledge and advances achieved at the genetic and metabolic levels to the process engineering level, i.e., kinetic modelling, scale-up of biphasic systems, enhancing mass transfer rates, biocatalyst separation, etc. The production of high-added value products derived from the organosulfur material present in oil can be regarded also as an economically viable process that has barely begun to be explored.

Cooperation in microbial communities and their biotechnological applications

Microbial communities are increasingly utilized in biotechnology. Efficiency and productivity in many of these applications depends on the presence of cooperative interactions between members of the community. Two key processes underlying these interactions are the production of public goods and metabolic cross-feeding, which can be understood in the general framework of ecological and evolutionary (eco-evo) dynamics. In this review, we illustrate the relevance of cooperative interactions in microbial biotechnological processes, discuss their mechanistic origins and analyse their evolutionary resilience. Cooperative behaviours can be damaged by the emergence of 'cheating' cells that benefit from the cooperative interactions but do not contribute to them. Despite this, cooperative interactions can be stabilized by spatial segregation, by the presence of feedbacks between the evolutionary dynamics and the ecology of the community, by the role of regulatory systems coupled to the environmental conditions and by the action of horizontal gene transfer. Cooperative interactions enrich microbial communities with a higher degree of robustness against environmental stress and can facilitate the evolution of more complex traits. Therefore, the evolutionary resilience of microbial communities and their ability to constraint detrimental mutants should be considered to design robust biotechnological applications.