Degradation of kinetically-stable o/w emulsions

Sub-micron colloidosomes with tuneable cargo release prepared using epoxy-functional diblock copolymer nanoparticles

HYPOTHESIS

Pickering emulsions stabilized using epoxy-functional block copolymer nanoparticles should enable the formation of sub-micron colloidosomes that are stable with respect to Ostwald ripening and allow tuneable small-molecule cargo release.

EXPERIMENTS

Epoxy-functional diblock copolymer nanoparticles of 24 ± 4 nm were prepared via reversible addition-fragmentation chain transfer (RAFT)-mediated dispersion polymerization of methyl methacrylate (MMA) in n-dodecane. Sub-micron water-in-n-dodecane Pickering emulsions were prepared by high-pressure microfluidization. The epoxy groups were then ring-opened using 3-aminopropyltriethoxysilane (APTES) to prepare cross-linked colloidosomes. The colloidosomes survived removal of the aqueous phase using excess solvent. The silica shell thickness could be adjusted from 11 to 23 nm by varying the APTES/GlyMA molar ratio. The long-term stability of the colloidosomes was compared to precursor Pickering emulsions. Finally, the permeability of the colloidosomes was examined by encapsulation and release of a small molecule.

FINDINGS

The Pickering emulsion droplet diameter was reduced from 700 to 200 nm by increasing the salt concentration within the aqueous phase. In the absence of salt, emulsion droplets were unstable due to Ostwald ripening. However, emulsions prepared with 0.5 M NaCl are stable for at least one month. The cross-linked colloidosomes demonstrated much more stable than the precursor sub-micron emulsions prepared without salt. The precursor nanoemulsions exhibited complete release (>99 %) of an encapsulated dye, while higher APTES/GlyMA ratios resulted in much lower dye release, yielding nearly impermeable silica capsules that retained around 95 % of the dye.

Intact NMR Approach Quickly Reveals Synchronized Microstructural Changes in Oil-in-Water Nanoemulsion Formulations

A soft-core oil-in-water (o/w) nanoemulsion (NE) is composed of nanometer (nm) sized oil droplets, stabilized by a surfactant layer and dispersed in a continuous bulky water phase. Characterization of the o/w NE molecule arrangements non-invasively, particularly the drug phase distribution (DPD) and its correlation to oil globule size (OGS), remains a challenge. Here we demonstrated the analytical methods of intact 19F Nuclear Magnetic Resonance (NMR) and 1H diffusion ordered spectroscopy (DOSY) NMR for their specificity in measuring DPD and OGS, respectively, on three NE formulations containing the active ingredient difluprednate (DFPN) at the same concentration. The results illustrated synchronized molecular rearrangement reflected in the DPD and OGS upon alterations in formulation. Addition of surfactant resulted in a higher DPD in the surfactant layer, and concomitantly smaller OGS. Mechanic perturbation converted most of the NE globules to the smaller thermodynamically stable microemulsion (ME) globules, changing both DPD and OGS to ME phase. These microstructure changes were not observed using 1D 1H NMR; and dynamic light scattering (DLS) was only sensitive to OGS of ME globule in mechanically perturbed formulation. Collectively, the study illustrated the specificity and essential role of intact NMR methods in measuring the critical microstructure attributes of soft-core NE systems quickly, accurately, and non-invasively. Therefore, the selected NMR approach can be a unique diagnostic tool of molecular microstructure or Q3 property in o/w NE formulation development, and quality assurance after manufacture process or excipient component changes.

Destabilization of a model O/W/O double emulsion: From bulk to interface

Oil-in-water-in-oil (O/W/O) double emulsions are considered an advanced oil-structuring technology that can accomplish multi-functions to improve food quality and nutrition. However, this special structure is thermodynamically unstable. This study formulated a model O/W/O double emulsion with standard surfactants, Tween 80 (4 %) and polyglycerol polyricinoleate (PGPR, 5 %), using a traditional two-step method with different homogenization parameters. Cryo-SEM and GC-FID results show that O/W/O emulsions were successfully formulated, and the release rate (RR) of medium-chain triglycerides (MCT) oil from the inner oil to the outer oil phase increased significantly with 2nd homogenization speed increasing, respectively. Interestingly, the RR of all samples reached about 75 % after 2 months of storage, suggesting that O/W/O emulsions were highly unstable. To explain the observed instability, dynamic interfacial tension and interfacial rheology were performed using a drop shape tensiometer. Results demonstrated that unadsorbed Tween 80 in the intermediate aqueous phase was a key factor in markedly decreasing the interfacial properties of the outer PGPR-assembled film by affecting the interfacial rearrangement. Additionally, it was found that the MCT release showed a positive correlation with the Tween 80 concentration, demonstrating that the formed Tween 80 micelles could transport oil molecules to strengthen the emulsion instability. Taken together, this study reveals the destabilization mechanism of model O/W/O surfactants-stabilized emulsions from bulk to interface, providing highly relevant insights for the design of stable O/W/O double emulsions.

Key Transdermal Patch Using Cannabidiol-Loaded Nanocarriers with Better Pharmacokinetics in vivo

Purpose

Cannabidiol (CBD) is a promising therapeutic drug with low addictive potential and a favorable safety profile. However, CBD did face certain challenges, including poor solubility in water and low oral bioavailability. To harness the potential of CBD by combining it with a transdermal drug delivery system (TDDS). This innovative approach sought to develop a transdermal patch dosage form with micellar vesicular nanocarriers to enhance the bioavailability of CBD, leading to improved therapeutic outcomes.

Methods

A skin-penetrating micellar vesicular nanocarriers, prepared using nano emulsion method, cannabidiol loaded transdermal nanocarriers-12 (CTD-12) was presented with a small particle size, high encapsulation efficiency, and a drug-loaded ratio for CBD. The skin permeation ability used Strat-M™ membrane with a transdermal diffusion system to evaluate the CTD and patch of CTD-12 (PCTD-12) within 24 hrs. PCTD-12 was used in a preliminary pharmacokinetic study in rats to demonstrate the potential of the developed transdermal nanocarrier drug patch for future applications.

Results

In the transdermal application of CTD-12, the relative bioavailability of the formulation was 3.68 ± 0.17-fold greater than in the free CBD application. Moreover, PCTD-12 indicated 2.46 ± 0.18-fold higher relative bioavailability comparing with free CBD patch in the ex vivo evaluation. Most importantly, in the pharmacokinetics of PCTD-12, the relative bioavailability of PCTD-12 was 9.47 ± 0.88-fold higher than in the oral application.

Conclusion

CTD-12, a transdermal nanocarrier, represents a promising approach for CBD delivery, suggesting its potential as an effective transdermal dosage form.

Acaricidal activity of synthetic spilanthol derivative against ticks of medical and veterinary importance

The ANESPSAT, a synthetic spilanthol derivative, and its nanoformulation were evaluated against Rhipicephalus microplus and Amblyomma sculptum ticks. ANESPSAT activity was compared with spilanthol and derivatives (ANESPE and others). The compound was synthesized in a gram-scale by a 2-step process, comprising a direct ester amidation and a Horner-Wadsworth- Emmons reaction. The nanoemulsions were produced by coarse homogenization followed by high-energy ultrasonication, in which hydrodynamic diameter, polydispersity index, and zeta potential remained stable. The spilanthol-eugenol hybrid derivatives did not show significant acaricidal activity. ANESPE killed 83% of the R. microplus larvae at 30 mg.mL-1, while ANESPSAT killed 97% at 0.5 mg.mL-1, showing to be the most active compound. Spilanthol and ANESPSAT had similar high mortality rates for tick larvae, with LC50 values of 0.10 and 0.14 mg.mL-1 for R. microplus larvae, and 0.04 and 0.48 mg.mL-1 for A. sculptum larvae, respectively. The efficacy of spilanthol was lower against R. microplus engorged females when compared with ANESPSAT, which was highly effective (>98%) against R. microplus engorged females. The nanoemulsion with ANESPSAT was effective against tick females, preventing egg laying and achieving 100% efficacy at 2.5 mg.mL-1. Spilanthol had only 59% efficacy at 10 mg.mL-1. The results suggest that ANESPSAT, a natural product derivative, could be used in novel formulations for tick management that might be safer and environmentally friendly.

Fabrication and stability of W/O/W emulsions stabilized by gum arabic and polyglycerol polyricinoleate

BACKGROUND

In order to study the effect of adsorption of surfactant at the two interfacial layers on emulsion stability, the kinetically stable water-in-oil-in-water (W/O/W) emulsion carriers were prepared using polyglycerol polyricinoleate (PGPR) and gum arabic (GA) as emulsifiers. The relationship between the adsorption of the surfactant and the stability mechanism of the emulsions was elucidated.

RESULTS

When the contents of PGPR and GA were low, the interfaces between oil and the inner and outer water phases, respectively, could not be completely covered. However, when the concentration of PGPR was higher than 60 g kg-1 , the excess PGPR was adsorbed on the interface between the oil phase and the outer water phase. When the concentration of GA reached 80 g kg-1 , more GA was adsorbed to the oil-in-water interface. Moreover, the presence of PGPR on the interface could reduce the adsorption capacity of GA. Two types of kinetically stable emulsions were obtained by optimizing the interface composition (60 g kg-1 GA/80 g kg-1 PGPR and 60 g kg-1 PGPR/80 g kg-1 GA). The kinetically stable W/O/W emulsions prepared in this study were successfully used to encapsulate a hydrophilic vitamin (vitamin B12) with an encapsulation efficiency (EE) of 80% and release efficiency (RE) of 95%. The interfacial adsorption GA can accelerate the hydrolysis of fat.

CONCLUSION

Overall, this study provides a new strategy for the preparation of W/O/W emulsions, which might be beneficial for application in food, cosmetic, chemical, and pharmaceutical industries. © 2023 Society of Chemical Industry.

Long-Term Stability of Lavandula x intermedia Essential Oil Nanoemulsions: Can the Addition of the Ripening Inhibitor Impact the Biocidal Activity of the Nanoformulations?

In this work, Lavandula x intermedia essential oil (LEO) was encapsulated in lipid-based nanoemulsions (NanoLEO) using the solvent-displacement technique. In order to preserve the colloidal stability of the formulation, LEO was appropriately doped with the incorporation of different levels of a water-insoluble oil used as a ripening inhibitor. All the nanoemulsion samples were evaluated in terms of the impact of the water-insoluble oil on the nanoemulsion formation, physical-chemical properties, and antibacterial effectiveness against E. coli (Gram-negative) and B. cereus (Gram-positive). The presence of the inert oil added benefits to the formulations in terms of appearance, colloidal stability, and loss of volatile components. However, the antimicrobial activity of the nanoemulsions dramatically decreased with the ripening inhibitor addition, probably because it hampered the internalization of the antimicrobial components of LEO within the bacterial cell membranes, thus nullifying the delivery ability of the nanoemulsion formulation. On the contrary, the undoped NanoLEO formulation showed unaltered antibacterial activity in both E. coli and B. cereus up to 40 weeks from the preparation.

Multiphase Chemistry under Nanoconfinement: An Electrochemical Perspective

Most relevant systems of interest to modern chemists rarely consist of a single phase. Real-world problems that require a rigorous understanding of chemical reactivity in multiple phases include the development of wearable and implantable biosensors, efficient fuel cells, single cell metabolic characterization techniques, and solar energy conversion devices. Within all of these systems, confinement effects at the nanoscale influence the chemical reaction coordinate. Thus, a fundamental understanding of the nanoconfinement effects of chemistry in multiphase environments is paramount. Electrochemistry is inherently a multiphase measurement tool reporting on a charged species traversing a phase boundary. Over the past 50 years, electrochemistry has witnessed astounding growth. Subpicoampere current measurements are routine, as is the study of single molecules and nanoparticles. This Perspective focuses on three nanoelectrochemical techniques to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry.

Wettability-tuned silica particles for emulsion-templated microcapsules

Pickering emulsions play a significant role in generating advanced materials and have widespread application in personal care products, consumer goods, crude oil refining, energy management, etc. Herein, we report a class of wettability tuned silica-based Pickering emulsifiers which stabilize a diverse range of fluid-fluid interfaces: oil/water, ionic liquid/oil, and oil/oil, and their use to prepare microcapsules via interfacial polymerization. To alter particle wettability, colloidal suspensions of SiO2 particles (22 nm) were modified via silanization with reagents of varied hydrophilicity/hydrophobicity, giving particles that could be dispersed in solvents that became the continuous phase of the emulsions. To test the viability of this system as templates for the fabrication of composite materials, the different particle-stabilized emulsions were coupled with interfacial polymerization, leading to microcapsules with polyurea/silica shells. These results demonstrate that a single particle feedstock can be coupled with fundamental chemical transformation to access a versatile toolkit for the stabilization of diverse fluid interfaces and serve as a template for the preparation of hybrid architectures.

Designing lisuride intranasal nanocarrier system for reduction of oxidative damage with enhanced dopamine level in brain for Parkinsonism

In the present study, nanoemulsion (NE) loaded with lisuride were formulated for delivering drug to brain via intranasal route. Dopamine levels, pharmacokinetic, and antioxidant activity were estimated. Antioxidant effect of lisuride NE was assessed in-vivo using oxidative stress models revealing symptoms like those of Parkinson's disease. Intranasally administered lisuride NE-treated group revealed a greater number of antioxidant enzymes, such as superoxide dismutase (SOD) and glutathione (GSH) as compared to the intravenously administered lisuride suspension in haloperidol rat model. Additionally, it was observed that lisuride NE can decrease dopamine loss. When lisuride NE was administered intranasally resulted in considerably higher dopamine concentrations (17.48 ± 0.05 ng/mL) in comparison to rats receiving haloperidol (7.28 ± 0.02 ng/mL). From study, it is suggested that NE is a possible strategy to deliver lisuride intranasally to lower free radical damage and prevent the biochemical alterations associated with Parkinson's disease.

Ionic Liquid-in-Water Emulsions Stabilized by Molecular and Polymeric Surfactants

Ionic liquids have drawn notable attention for their unique solvent properties and use in applications such as batteries and chemical separations. While many ionic liquids are water-soluble, there are numerous examples of ionic liquids that are sufficiently hydrophobic to remain phase separated from water. However, relatively little is known about the stability and properties of ionic liquid-in-water emulsions. Here, we survey a series of ionic liquid-in-water emulsions stabilized by a range of ionic and nonionic molecular surfactants and polymers. To assess droplet stability and dynamics, we characterize the ionic liquid-surfactant interfacial tension, describe qualitative coarsening rates, and quantify droplet solubilization rate. In some instances, we observe unexpected spontaneous formation of complex double and triple emulsions. Our observations highlight approaches for ionic liquid emulsion formulation and provide insight into how to address challenges surrounding stabilization of ionic liquid-in-water droplets with molecular surfactants.

Effect of Oil-Soluble/Water-Soluble Surfactants on the Stability of Water-in-Oil Systems, an Atomic Force Microscopy Study

The stabilization mechanism of water-in-oil (W/O) emulsions has been studied by measuring the interactions between two water droplets in n-tetradecane using atomic force microscopy. The effects of water-soluble surfactants (SDS/CTAB/Tween 80), an oil-soluble surfactant (Span 20), and the coexistence of the water and oil-soluble surfactants on the stability of water droplets in oil were investigated separately. It is found that the addition of oil-soluble surfactants (Span 20) prevents the coalescence of water droplets in oil. To discuss the role of an oil-soluble surfactant, we analyzed the force curve by applying the theoretical model. The results demonstrate that the oil-soluble surfactant (Span 20) stabilizes dispersed droplets by adsorbing onto the interface and forming a relatively tighter layer with the increase in surfactant concentration, which hinders film rupture. This behavior of the surfactant could also be properly characterized by steric hindrance. A further step was taken by introducing another water-soluble surfactant. It is found that the addition of either SDS or CTAB into the water phase is futile in inducing droplet coalescence in the presence of Span 20. In contrast, Tween 80 was found to be effective in destabilizing water droplets, which could be due to the competitive adsorption between Tween 80 and Span 20 at the interface. By characterizing the interfacial adsorption of Tween 80 and Span 20 with a theoretical adsorption isotherm model, the result indicates that interface replacement would result in a loose adsorption layer that is insufficient to hinder droplet coalescence. Our study provides an intriguing understanding of the role of surfactants in the stabilization and destabilization of water-in-oil emulsions.

A Review of Essential Oils as Antimicrobials in Foods with Special Emphasis on Fresh Produce

ABSTRACT

Consumer safety concerns over established fresh produce washing methods and the demand for organic and clean-label food has led to the exploration of novel methods of produce sanitization. Essential oils (EOs), which are extracted from plants, have potential as clean-label sanitizers because they are naturally derived and act as antimicrobials and antioxidants. In this review, the antimicrobial effects of EOs are explored individually and in combination, as emulsions, combined with existing chemical and physical preservation methods, incorporated into films and coatings, and in vapor phase. We examined combinations of EOs with one another, with EO components, with surfactants, and with other preservatives or preservation methods to increase sanitizing efficacy. Components of major EOs were identified, and the chemical mechanisms, potential for antibacterial resistance, and effects on organoleptic properties were examined. Studies have revealed that EOs can be equivalent or better sanitizing agents than chlorine; nevertheless, concentrations must be kept low to avoid adverse sensory effects. For this reason, future studies should address the maximum permissible EO concentrations that do not negatively affect organoleptic properties. This review should be beneficial to food scientists or industry personnel interested in the use of EOs for sanitization and preservation of foods, including fresh produce.

HIGHLIGHTS

Evaluation of the synergistic effect of plant-based components on the stability of curcuminoid emulsion

In this study, the effect of matrix compounds from natural curcuminoid resources on the stability of curcuminoids and emulsions thereof was evaluated. Curcuminoid emulsions were prepared curcuminoid rich sources (curcuminoid extract, an aqueous turmeric concentrate and turmeric powder) with medium-chain triglyceride oil as lipid phase, lecithin, and pectin as emulsifiers. The curcuminoid emulsions were exposed to light in the visible wavelength range (300 nm–800 nm) at the specific energy input of 0.47 kW/m2 for 7 days and to the temperature of 4 °C, 25 °C, 40 °C for 49 days. The total curcuminoid retention (TC), droplet size (DS) change, instability index (InI), and yellowness reduction (YR) was observed during the storage time. The half-life of curcuminoids in emulsions was increased to 21 h, while the half-life of free curcuminoids was 1.3 h in the light exposure test. The co-compounds from the curcuminoid sources contributed to the emulsion stability by increasing the viscosity. In the thermal exposure test, the matrix compound system retained more than 93% curcuminoids after 49 days of storage at 40 °C, whereas the phase separation increased significantly. However, the TC reduction was independent of the InI change and droplet agglomeration. The YR depended on the TC and the amount of co-components in the emulsion.

Insights into the release mechanisms of antioxidants from nanoemulsion droplets

The therapeutic effects of antioxidant-loaded nanoemulsion can be often optimized by controlling the release rate in human body. Release kinetic models can be used to predict the release profile of antioxidant compounds and allow identification of key parameters that affect the release rate. It is known that one of the critical aspects in establishing a reliable release kinetic model is to understand the underlying release mechanisms. Presently, the underlying release mechanisms of antioxidants from nanoemulsion droplets are not yet fully understood. In this context, this review scrutinized the current formulation strategies to encapsulate antioxidant compounds and provide an outlook into the future of this research area by elucidating possible release mechanisms of antioxidant compounds from nanoemulsion system.

Olive oil and clove oil-based nanoemulsion for topical delivery of terbinafine hydrochloride: in vitro and ex vivo evaluation

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96–98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.

Preparation, Characterization, Evaluation of Neuroprotective Effect, and Related Mechanisms of Phosphatidylserine Emulsion in 5- and 12-Week Old Mice

Phosphatidylserine (PS) improves learning and memory capacity. In this study, PS formulation was optimized by a response surface methodology. Moreover, we found that PS not only functions as a biologically active component in food preparations but also improves the emulsion's physical stability. Our results showed that the PS emulsions are characterized by a smaller particle size, higher ζ-potential (negative), higher viscosity, and lower surface tension and centrifugal stability constants than the emulsion without PS. Furthermore, we explored the neuroprotective effects of PS emulsion and its underlying mechanisms. Treatment with 2% (w/w) PS emulsion for three months enhanced spatial learning and memory in 5- and 12-week old mice in the Morris water maze test. Western-blotting analysis displayed that the 2% (w/w) PS emulsion treated group upregulated BDNF, TrkB, PSD95, mTOR, MBP, and ErbB4 expression in the hippocampus of 5- and 12-week old mice. Reverse transcription polymerase chain reaction (RT-PCR) analysis revealed elevated Nrg-1 and ErbB4 mRNA expression in the 2% (w/w) PS emulsion treated groups, and high Nrg-1 and ErbB4 expression levels were associated with better myelination. In conclusion, we reported PS emulsions with high stability and high bioavailability. Meanwhile, 2% (w/w) PS emulsion enhances learning, memory, and myelination in mice by activating the BDNF/TrkB and Nrg-1/ErbB4 signaling.

Zwitterionic Graphene Quantum Dots to Stabilize Pickering Emulsions for Controlled-Release Applications

Graphene quantum dots (GQDs) are a subset of the nanocarbon material family, which promise a wide spectrum of applications. Herein, we describe amphiphilic graphene quantum dots with zwitterionic features (ZGQDs), which are able to stabilize the oil/water interface. ZGQDs were fabricated by modifying GQDs with tertiary amine groups and alkyl groups. Moreover, the blocking and unblocking behavior of ZGQDs at the oil/water interface could be tuned by adjusting pH values in the aqueous phase. It would provide a flexible and adjustable method to manipulate interfacial properties of ZGQDs, which enabled a switchable molecular diffusion through a fluid-fluid interface. ZGQDs have shown well-controlled interfacial behavior under different pH conditions, indicating great potential for applications in controlled molecular diffusion based on nanoparticles demonstrated in this work.

A Materials Science Perspective of Midstream Challenges in the Utilization of Heavy Crude Oil

An increasing global population and a sharply upward trajectory of per capita energy consumption continue to drive the demand for fossil fuels, which remain integral to energy grids and the global transportation infrastructure. The oil and gas industry is increasingly reliant on unconventional deposits such as heavy crude oil and bitumen for reasons of accessibility, scale, and geopolitics. Unconventional deposits such as the Canadian Oil Sands in Northern Alberta contain more than one-third of the world's viscous oil reserves and are vital linchpins to meet the energy needs of rapidly industrializing populations. Heavy oil is typically recovered from subsurface deposits using thermal recovery approaches such as steam-assisted gravity drainage (SAGD). In this perspective article, we discuss several aspects of materials science challenges in the utilization of heavy crude oil with an emphasis on the needs of the Canadian Oil Sands. In particular, we discuss surface modification and materials' design approaches essential to operations under extreme environments of high temperatures and pressures and the presence of corrosive species. The demanding conditions for materials and surfaces are directly traceable to the high viscosity, low surface tension, and substantial sulfur content of heavy crude oil, which necessitates extensive energy-intensive thermal processes, warrants dilution/emulsification to ease the flow of rheologically challenging fluids, and engenders the need to protect corrodible components. Geopolitical reasons have further led to a considerable geographic separation between extraction sites and advanced refineries capable of processing heavy oils to a diverse slate of products, thus necessitating a massive midstream infrastructure for transportation of these rheologically challenging fluids. Innovations in fluid handling, bitumen processing, and midstream transportation are critical to the economic viability of heavy oil. Here, we discuss foundational principles, recent technological advancements, and unmet needs emphasizing candidate solutions for thermal insulation, membrane-assisted separations, corrosion protection, and midstream bitumen transportation. This perspective seeks to highlight illustrative materials' technology developments spanning the range from nanocomposite coatings and cement sheaths for thermal insulation to the utilization of orthogonal wettability to engender separation of water-oil emulsions stabilized by endogenous surfactants extracted during SAGD, size-exclusion membranes for fractionation of bitumen, omniphobic coatings for drag reduction in pipelines and to ease oil handling in containers, solid prills obtained from partial bitumen solidification to enable solid-state transport with reduced risk of damage from spills, and nanocomposite coatings incorporating multiple modes of corrosion inhibition. Future outlooks for onsite partial upgradation are also described, which could potentially bypass the use of refineries for some fractions, enable access to a broader cross-section of refineries, and enable a new distributed chemical manufacturing paradigm.

Exploring the antibacterial, antibiofilm, and antivirulence activities of tea tree oil-containing nanoemulsion against carbapenem-resistant Serratia marcescens associated infections

Carbapenem-resistant Serratia marcescens (CRE-S. marcescens) has recently emerged as an opportunistic human pathogen that causes various nosocomial and respiratory tract infections. The prognosis for CRE-S. marcescens-related infections is very poor and these infections are difficult to treat. This study investigated the synthesis of tea tree oil nanoemulsion (TTO-NE) and its impact on CRE-S. marcescens both in vitro and in vivo. TTO-NE was characterized by dynamic light scattering (DLS) and effectively eradicated bacterial planktonic and sessile forms, reduced bacterial virulence factors, and generated reactive oxygen species (ROS) in the bacterial cell. Notably, TTO-NE was efficient in reducing the colonization of CRE-S. marcescens in a C. elegans in vivo model. The data suggest that TTO-NE might be an excellent tool to combat infections associated with CRE-S. marcescens.

Hyaluronic Acid-Glycine-Cholesterol Conjugate-Based Nanoemulsion as a Potent Vaccine Adjuvant for T Cell-Mediated Immunity

Clinical cases of allergic reaction that are due to excipients containing polyethylene glycol (PEG), a hydrophilic molecule commonly used in drug/vaccine formulations, has attracted much attention in recent years. In order to develop PEG-free adjuvants, we investigated the feasibility of natural ingredients in the human body such as hyaluronic acid in the form of hyaluronic acid-glycine cholesterol (HACH) conjugate as an excipient for vaccine formulation. Interestingly, HACH grafted with ~13 wt.% cholesterol has good water dispersity and can serve as an emulsifier to stabilize the squalene/water interfaces, yielding a milky white and isotropic emulsion (SQ@HACH) after being passed through a high-shear microfluidizer. Our results show that SQ@HACH particles possessed a unimodal average hydrodynamic diameter of approximately 190 nm measured by dynamic light scattering and exhibited good stability upon storage at 4 °C and 37 °C for over 20 weeks. The results of immunogenicity using a mouse model with ovalbumin (OVA) as the antigen revealed that SQ@HACH significantly enhanced antigen-specific immune responses, including the polarization of IgG antibodies, the cytokine secretions of T cells, and enhancement of cytotoxic T lymphocyte (CTL) activation. Moreover, SQ@HACH revealed lower local inflammation and rapidly absorbing properties compared with AlPO₄ after intramuscular injection in vivo, indicating the potential functions of the HA-derived conjugate as an excipient in vaccine formulations for enhancement of T cell-mediated immunity.

Nanoemulgel for Improved Topical Delivery of Desonide: Formulation Design and Characterization

This research aimed to develop a novel drug delivery system to improve treatment of skin disorders. The system is comprised of a Carbopol 980-based nanoemulgel (NE-gel) containing a desonide (DES; 0.05%, w/w) nanoemulsion (NE), which has a small particle size, high encapsulation efficiency, good thermodynamic stability, good permeation ability, and high skin retention. DES-loaded NE (DES-NE) was prepared by high-pressure homogenization. The developed formulation was characterized by differential scanning calorimetry (DSC), X-ray diffraction, drug release, skin permeation, and drug retention. DES in vitro release and skin permeation studies with different formulations of artificial membrane and rat abdominal skin were performed with the Franz diffusion cell system. Confocal laser scanning microscopy (CLSM) was used to detect the localization and permeation pathways of drugs in the skin. Compared with commercially available gel (CA-gel) and NE, the NE-gel release process conformed to the Higuchi release model (R² = 0.9813). NE-gel prolonged the drug release time and allowed for reduced administration dose and frequency. The unit cumulative permeation of NE and NE-gel through the skin for 12 h was 63.13 ± 2.78 and 42.53 ± 2.06 μg/cm², respectively, values significantly higher (p < 0.01) than that of the CA-gel (30.65 ± 1.25 μg/cm²) and CA-cream (15.21 ± 0.97 μg/cm²). The DES-NE and DES NE-gel skin drug retention was significantly higher than commercially available formulations (p < 0.01). Hence, the prepared NE-gel is a potential vehicle for improved topical DES delivery for better treatment of skin disorders.

Comparison of binary cress seed mucilage (CSM)/β-lactoglobulin (BLG) and ternary CSG-BLG-Ca (calcium) complexes as emulsifiers: Interfacial behavior and freeze-thawing stability

Protein-polysaccharide complexes often exhibit amended techno-functional characteristics when compared to their individual participant biomolecules. In this study, a complex coacervation of cress seed mucilage (CSM)/β-lactoglobulin (Blg) was used for stabilizing oil-in-water emulsions; they were characterized in terms of physical properties, droplet-size distribution and microstructure. Also, a comprehensive study was carried out on interfacial rheological responses and on the corresponding emulsion stability of different complexes. Freeze-thaw stability of the produced emulsions which had from mixtures of CSM-Blg was also evaluated. More than the size of droplets, interfacial rheological characteristics were associated with the properties of the adsorbed layers and with the stability of emulsions in storage. Using the CSM-Blg-Ca ultimately resulted in emulsions that proved stable against creaming, with no sign of phase separation over 3 weeks. These results show protein-polysaccharide complexes as appropriate emulsifiers that can make emulsion-based products resistant to unwanted changes caused by freeze-thawing.

Improvements of plant protein functionalities by Maillard conjugation and Maillard reaction products

Plant-derived protein research has gained attention in recent years due to the rise of health concerns, allergenicity, trends toward vegan diet, food safety, and sustainability; but the lower techno-functional attributes of plant proteins compared to those of animals still remain a challenge for their utilization. Maillard conjugation is a protein side-chain modification reaction which is spontaneous, and do not require additional chemical additive to initiate the reaction. The glycoconjugates formed during the reaction significantly improves the thermal stability and pH sensitivity of proteins. The modification of plant-derived protein using Maillard conjugation requires a comprehensive understanding of the influence of process conditions on the conjugation process. These factors can be used to establish a correlation with different functional and bioactive characteristics, to potentially adapt this approach for selective functionality enhancement and nutraceutical development. This review covers recent advances in plant-derived protein modification using Maillard conjugation, including different pretreatments to modify the functionality and bioactivity of plant proteins and their potential uses in practice. An overview of different properties of conjugates and MRPs, including food safety aspects, is given.

Larvicide Activity on Aedes aegypti of Essential Oil Nanoemulsion from the Protium heptaphyllum Resin

The aim of this work was to prepare a nanoemulsion containing the essential oil of Protium heptaphyllum resin and to evaluate the larvicidal activity and the residual larvicidal effect against Aedes aegypti. The essential oil was identified by gas chromatography coupled to a mass spectrometer, and the nanoemulsions were prepared using a low-energy method and characterized by photon correlation spectroscopy. The results indicated the major constituents as p-cimene (27.70%) and α-Pinene (22.31%). Nanoemulsions had kinetic stability and a monomodal distribution in a hydrophilic-lipophilic balance of 14 with particle diameters of 115.56 ± 1.68 nn and zeta potential of −29.63 ± 3.46 mV. The nanoemulsion showed larvicidal action with LC₅₀ = 2.91 µg∙mL⁻¹ and residual larvicidal effect for 72 h after application to A. aegypti larvae. Consequently, the nanobiotechnological product derived from the essential oil of P. heptaphyllum resin could be used against infectious disease vectors.

New Low-Energy Method for Nanoemulsion Formation: pH Regulation Based on Fatty Acid/Amine Complexes

Phase inversion composition methods and phase inversion temperature methods are the common methods for nanoemulsion formation. The mechanisms governing both PIC and PIT are the same: composition or temperature can trigger a change in the surfactant spontaneous curvature during the emulsification process. It is anticipated that pH may also induce a change in the spontaneous curvature of pH-responsive surfactants to prepare nanoemulsions. Therefore, fatty acid/amine complexes were synthesized through electrostatic interactions. Based on these complexes, nanoemulsions were successfully prepared by pH regulation. Electrical conductivity and pH measurements were employed to determine the phase inversion process. Dynamic light scattering, digital fluorescence microscopy, and transmission electron microscopy were employed to characterize the droplet size and morphology of the nanoemulsion. The effects of complex concentration, NaCl concentration, and pH of the system were investigated. The developed method, phase inversion pH (PIpH) method, is a moderate and easy-control method. Using this method, the size distributions of nanoemulsion are monomodal and narrow. Nanoemulsion prepared by PIpH has a unique pH-responsive behavior that can be controllably regulated among nanoemulsions, emulsions, and phase separation systems.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.

A simple and effective strategy to enhance the stability and solid-liquid interfacial interaction of an emulsion by the interfacial dilational rheological properties

The development of an emulsion is an important challenge in many fields, such as agrochemicals, pharmaceutics, paints, cosmetics, inkjet printing, and food science. However, the traditional strategies that refer to the empirical value and complex secondary additives cannot reflect the influence of the structure, content, compound, and adsorption of emulsifiers. Here, we propose a simple and effective strategy to develop the emulsion, wherein the emulsifiers are chosen based on the dilational rheological properties of the interfacial films at the molecular level. The dilational rheological properties of polyoxyethylene (80) castor oil (EL-80), sorbitan monostearate (Span 60), and their emulsions were explored by the oscillating drop method. Based on the dilational rheological properties, the emulsions were prepared by the phase inversion emulsification technique. The results showed that the emulsion was stable and realized effective solid-liquid interfacial interaction, which was attributed to the large dilational modulus (intermolecular interaction) at the oil/water interface and loss modulus (molecular diffusion exchange) at the air/water interface. These factors reduced the Ostwald ripening and coalescence, and finally increased the spreading diameter. Additionally, the prochloraz 25% emulsion in water (EW) and difenoconazole 20% EW were developed to verify the feasibility of the strategy. Therefore, this research advances the understanding of an emulsion by interfacial dilational rheological properties, which can provide a simple and effective strategy to develop a stable emulsion and achieve an effective solid-liquid interfacial interaction of the emulsion.

Effect of phosphatidylcholine on the stability and lipolysis of nanoemulsion drug delivery systems

Phosphatidylcholines (PCs) have been widely used in pharmaceutical research. Unfortunately, our understanding of how PCs influence the in vivo lipolysis process of drug delivery systems is still limited. In this study, PCs with fatty acid chains of varying lengths and saturability were used as emulsifiers to prepare curcumin-loaded nanoemulsions (Cur-NEs). The differences in particle size as well as drug and free fatty acid release during the lipolysis process were studied in a simulated blood environment. Furthermore, the pharmacokinetics and antitumor efficacy of Cur-NEs were evaluated in mice. The prepared 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)-stabilized Cur-NEs showed similar particle size and stability during storage but exhibited different lipolysis behaviors in vitro and in vivo. Due to the gel state of DPPC in the physiological environment, DPPC-stabilized Cur-NEs had low binding affinity with proteins and maintained their integrity in plasma, leading to sustained drug release, prolonged circulation time and enhanced antitumor efficacy in 4T1 tumor-bearing mice. In contrast, DOPC and DSPC-stabilized Cur-NEs were prone to coalescence in the plasma, resulting in rapid drug release and elimination from circulation. Our findings demonstrated that proper use of PCs is beneficial for obtaining desired transport behavior and drug therapeutic effects, providing guiding principles for rational design of nanodelivery systems.

Ultrasonic assisted water-in-oil emulsions encapsulating macro-molecular polysaccharide chitosan: Influence of molecular properties, emulsion viscosity and their stability

An ultrasonic technique was applied to formulation of two-phase water-in-paraffin oil emulsions loading a high-molecular polysaccharide chitosan (CS) and stabilized by an oil-soluble surfactant (Span80) at different operational conditions. The influence of chitosan molecular properties, phase volume ratio (φ_w), Span80 volume fraction (φ_s) and ultrasonic processing parameters were systemically investigated on the basis of mean droplet diameter (MDD) and polydispersity index (PDI) of emulsions. It was observed that the molecular weight (M_w) of CS was an important influential factor to MDD due to the non-Newtonian properties of CS solution varying with M_w. The minimum MDD of 198.5 nm with PDI of 0.326 was obtained with ultrasonic amplitude of 32% for 15 min at an optimum φ_w of 35%, φ_s of 8%, probe position of 2.2 cm to the top of emulsion, while CS with M_w of 400 kDa and deacetylation degree of 84.6% was used. The rise of emulsion viscosity and the reduction of negative zeta potential at φ_w increasing from 5% to 35% were beneficial to obtain finer droplets and more uniform distribution of emulsions, and emulsion viscosity could be represented as a monotonically-decreasing power function of MDD at the same φ_w. FTIR analysis indicated that the molecular structure of paraffin oil was unaffected during ultrasonication. Moreover, the emulsions exhibited a good stability at 4 °C with a slight phase separation at 25 °C after 24 h of storage. By analyzing the evolution of MDD, PDI and sedimentation index (SI) with time, coalescence model showed better fitting results as comparison to Ostwald ripening model, which demonstrated that the coalescence or flocculation was the dominant destabilizing mechanism for such W/O emulsions encapsulating CS. This study may provide a valuable contribution for the application of a non-Newtonian macromolecule solution as dispersed phase to generate nano-size W/O emulsions via ultrasound, and widen knowledge and interest of such emulsions in the functional biomaterial field.

Using Resonance-Enhanced Multiphoton Ionization Time-of-Flight Mass Spectrometry to Quantitatively Analyze the Creaming of an Emulsion

In this study, we used a quantitative analytical method to indicate creaming behavior in an emulsion. An oil-in-water emulsion was directly measured by resonance-enhanced multiphoton ionization time-of-flight mass spectrometry, and the time profiles of the peak areas of an oil component, styrene, were obtained at heights of 1, 2, and 3 cm from the bottom of a sample that had a height of 4 cm. All time profiles roughly indicated that the signal intensity increased once, then decreased, and finally settled. Moreover, we proposed a fitting equation for the time profiles by subtracting two sigmoid functions, whereby the degree of the signal increases at the initial stage, the degree of the signal decreases after the increase, and the times for continuing the higher signal intensities were all longer as the monitoring positions were raised. This method would surely provide useful information about emulsions that undergo creaming behavior.

Optimizing the Preparation of Semi-Crystalline Paraffin/Poly(Urea-Formaldehyde) Microcapsules for Thermal Energy Storage

Paraffin, the most common phase change material, has been widely utilized as the core component in thermal energy storage in the form of microcapsules. In this study, semi-crystalline paraffin is capsulated into a poly(urea-formaldehyde) (PUF) shell by a two-step polymerization process. To obtain the microcapsule with good morphology and high latent heat, sodium chloride and crosslinker (a mixture of ammonium chloride and resorcinol with a weight ratio of 1:1) are incorporated and their addition amounts were optimized through differential scanning calorimetry (DSC) and SEM. The optimized microcapsules were obtained by adding 4 wt% sodium chloride, and 0.25 wt% crosslinker exhibits a diameter of several microns and a melting enthalpy of 110 J/g. This detailed study shows that sodium chloride strongly affects the morphology of paraffin emulsion by enlarging droplets, widening the size distribution, and enhancing the stability, which should be attributed to the enhancement of electric double layer strength. In addition, sodium chloride can weaken the Zeta potential of prepolymer and provides more opportunity for prepolymer to deposit on the surface of emulsion droplets. The two components in crosslinker play different roles in the polymerization process. Ammonium chloride reacts with prepolymers and reduces the pH of system, which can accelerate the curing process, while resorcinol probably participates in polymerization as a comonomer.