A carbon electrode sputtered with palladium and gold for the amperometric detection of hydrogen peroxide

Micropipette Tip-Based Immunoassay with Electrochemical Detection of Antitissue Transglutaminase to Diagnose Celiac Disease Using Staples and a Paper-Based Platform

In this work, 1-200 μL polypropylene micropipette tips were used as platforms for performing immunoassays after converting their inner surfaces on a capture zone for the analyte of interest. We have used a micropipette-tip immunoelectroanalytical platform for the detection of antitissue transglutaminase (IgA), the main biomarker for celiac disease. Modification of the tip wall with poly-l-lysine allowed adsorption of tissue transglutaminase (tTG), which will capture later anti-tTG (IgA) antibodies developed in celiac-affected people. A sandwich-type format was followed, incubating simultaneously the analyte and the detection antibody, labeled with horseradish peroxidase. With this new application for an extremely common lab material, we can perform quantitative analysis by dispensing the liquid into a low-cost and miniaturized staple-based paper electrochemical platform. The analytical signal was the reduction of the enzymatically oxidized substrate, recorded chronoamperometrically (i-t curve). The intensity of the current obtained at a fixed time after the application of the cathodic potential followed a linear relationship with anti-tTG (IgA) concentration. The relative standard deviation obtained for immunoassays performed in different tips indicates the adequate precision of this new methodology, which is very promising for decentralized analysis. Negative and positive controls produced results that were in accordance with those obtained with spectrophotometric enzyme linked-immunosorbent assays.

A bimetallic nanocoral Au decorated with Pt nanoflowers (bio)sensor for H2O2 detection at low potential

In this work, we have developed for the first time a method to make novel gold and platinum hybrid bimetallic nanostructures differing in shape and size. Au-Pt nanostructures were prepared by electrodeposition in two simple steps. The first step consists of the electrodeposition of nanocoral Au onto a gold substrate using hydrogen as a dynamic template in an ammonium chloride solution. After that, the Pt nanostructures were deposited onto the nanocoral Au organized in pores. Using Pt (II) and Pt (IV), we realized nanocoral Au decorated with Pt nanospheres and nanocoral Au decorated with Pt nanoflowers, respectively. The bimetallic nanostructures showed better capability to electrochemically oxidize hydrogen peroxide compared with nanocoral Au. Moreover, Au-Pt nanostructures were able to lower the potential of detection and a higher performance was obtained at a low applied potential. Then, glucose oxidase was immobilized onto the bimetallic Au-Pt nanostructure using cross-linking with glutaraldehyde. The biosensor was characterized by chronoamperometry at +0.15V vs. Ag pseudo-reference electrode (PRE) and showed good analytical performances with a linear range from 0.01 to 2.00mM and a sensitivity of 33.66µA/mMcm². The good value of K_m^app (2.28mM) demonstrates that the hybrid nanostructure is a favorable environment for the enzyme. Moreover, the low working potential can minimize the interference from ascorbic acid and uric acid as well as reducing power consumption to effect sensing. The simple procedure to realize this nanostructure and to immobilize enzymes, as well as the analytical performances of the resulting devices, encourage the use of this technology for the development of biosensors for clinical analysis.

Fabrication of noble-metal catalysts with a desired surface wettability and their applications in deciphering multiphase reactions

Noble-metal Pd and Pt catalysts with a wide range of surface wettability were fabricated through an electrochemical approach and were characterized with scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and atomic force microscopy. The importance of surface wettability of solid catalysts in multiphase reactions-especially their correlation to the nature of the studied chemical system-was investigated by reducing oxygen in an alkaline solution and oxidizing hydrogen peroxide and sodium formate in alkaline or buffered solutions at the as-prepared catalysts. These experiments illustrate that the nature of a multiphase reaction plays a critical role in determining the influence of surface wettability on the catalyst performance, providing a unique approach to decipher the reaction process. The investigation allows us to gain new insights into the electrochemical oxidation of sodium formate.

Highly selective microbiosensors for in vivo measurement of glucose, lactate and glutamate

An alternative approach to production of amperometric microbiosensors, which combines electrochemical electrometallization and electropolymerisation of phenylene diamine film with covalent binding enzymes, is presented. In this respect, for a sensitive detection of hydrogen peroxide (HP) at +0.4V versus Ag/AgCl (detection limit of 0.5 microM, s/n=3), carbon fiber microelectrodes (30 microm in diameter and 500 microm long) were covered with ruthenium. To obtain a highly selective detection of HP, in the presence of different interfering compounds (ascorbic acid, uric acid, etc.), an additive semi-permeable polymer film was formed on the top of the ruthenium layer by electropolymerisation of m-phenylene diamine (m-PD). The enzymatic selective layers were formed by covalent cross-linking the enzymes (glucose oxidase, lactate oxidase or glutamate oxidase) with BSA by glutaraldehyde in the presence of ascorbate oxidase. An additional polymeric layer based on polyurethane and Nafion was deposited on the top of the enzymatic membrane (glucose oxidase, lactate oxidase, or glutamate oxidase) in order to extend the dynamic range of biosensors up to 4mM for glucose (R=0.997; Y[nA]=-0.22+9.68x[glucose, mM]), 1.75mM for lactate (R=0.991; Y[nA]=0.43+15.36x[lactate, mM]) and 0.25 mM for glutamate (R=0.999; Y[nA]=0.02+29.14x[glutamate, mM]). The developed microbiosensors exhibited also negligible influences from interfering compounds at their physiological concentrations. Microbiosensors remained stable during 10h in a flow injection system at 36 degrees C and pH 7.4. The microbiosensors developed are now used in vivo and, as an example, we report here the data obtained with the glucose biosensor.

A novel, disposable, screen-printed amperometric biosensor for glucose in serum fabricated using a water-based carbon ink

Screen-printed amperometric glucose biosensors have been fabricated using a water-based carbon ink. The enzyme glucose oxidase (GOD) and the electro-catalyst cobalt phthalocyanine were mixed with the carbon ink prior to the screen-printing process; therefore, biosensors are prepared in a one-step fabrication procedure. Optimisation of the biosensor performance was achieved by studying the effects of pH, buffer strength, and applied potential on the analytical response. Calibration studies were performed under optimum conditions, using amperometry in stirred solution, with an operating potential of +500 mV versus SCE. The sensitivity was found to be 1170 nA mM(-1), with a linear range of 0.025-2 mM; the former represents the detection limit. The disposable amperometric biosensor was evaluated by carrying out replicate determinations on a sample of bovine serum. This was achieved by the method of multiple standard additions and included a correction for background currents arising from oxidizable serum components. The mean serum concentration was calculated to be 8.63 mM and compared well with the supplier's value of 8.3 mM; the coefficient of variation was calculated to be 3.3% (n=6).

Silver nanoparticle assemblies supported on glassy-carbon electrodes for the electro-analytical detection of hydrogen peroxide

Electrochemical detection of hydrogen peroxide using an edge-plane pyrolytic-graphite electrode (EPPG), a glassy carbon (GC) electrode, and a silver nanoparticle-modified GC electrode is reported. It is shown, in phosphate buffer (0.05 mol L(-1), pH 7.4), that hydrogen peroxide cannot be detected directly on either the EPPG or GC electrodes. However, reduction can be facilitated by modification of the glassy-carbon surface with nanosized silver assemblies. The optimum conditions for modification of the GC electrode with silver nanoparticles were found to be deposition for 1 min at -0.5 V vs. Ag from 5 mmol L(-1) AgNO3/0.1 mol L(-1) TBAP/MeCN, followed by stripping for 2 min at +0.5 V vs. Ag in the same solution. A wave, due to the reduction of hydrogen peroxide on the silver nanoparticles is observed at -0.68 V vs. SCE. The limit of detection for this modified nanosilver electrode was 2.0 x 10(-6) mol L(-1) for hydrogen peroxide in phosphate buffer (0.05 mol L(-1), pH 7.4) with a sensitivity which is five times higher than that observed at a silver macro-electrode. Also observed is a shoulder on the voltammetric wave corresponding to the reduction of oxygen, which is produced by silver-catalysed chemical decomposition of hydrogen peroxide to water and oxygen then oxygen reduction at the surface of the glassy-carbon electrode.

Electrocatalytic Oxidation of Hydrogen Peroxide and Cysteine at a Glassy Carbon Electrode Modified with Platinum Nanoparticle-deposited Carbon Nanotubes

A glassy carbon electrode modified with platinum nanoparticle-decorated carbon nanotubes (Pt-CNT/GCE) was prepared. The electrochemical behaviors for the catalysis oxidations of hydrogen peroxide and cysteine were studied. The Pt-CNT/GCE showed catalytic activity for electro-oxidation of hydrogen peroxide at 0.6 V in PBS (pH = 7.0) and for that of cysteine at 0.55 V in sulfuric acid medium (pH <or = 2). The results indicated that the peak currents were proportional to the concentrations of both hydrogen peroxide and cysteine; the currents at Pt-CNT/GCE were almost 3-times higher than that at Pt electrode. The electrocatalytic oxidation mechanisms for hydrogen peroxide and cysteine at Pt-CNT/GCE surface were briefly studied.

A disposable, reagentless, third-generation glucose biosensor based on overoxidized poly(pyrrole)/tetrathiafulvalene-tetracyanoquinodimethane composite

A disposable glucose biosensor based on glucose oxidase immobilized on tetrathiafulvalene-tetracyanoquinodimethane (ITF-TCNQ) conducting organic salt synthesized in situ onto an overoxidized poly(pyrrole) (PPy(ox).) film is described. The TIF-TCNQ crystals grow through the nonconducting polypyrrole film (ensuring electrical connection to the underlying Pt electrode) and emerge from the film forming a treelike structure. The PPy(ox) film prevents the interfering substances from reaching the electrode surface. The sensor behavior can be modeled by assuming a direct reoxidation of the enzyme at the surface of the TTF-TCNQ crystals. A heterogeneous rate constant around 10(-6) - 10(-7) cm s(-1) has been estimated. The biosensor is nearly oxygen- and interference-free and when integrated in a flow injection system displays a remarkable sensitivity (70 nA/mM) and stability.