Development of a screening method for cocaine and cocaine metabolites in saliva using hollow fiber membrane solvent microextraction

Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples-a review

Molecularly imprinted polymers (MIP) consist of a molecular recognition technology with applicability in different areas, including forensic chemistry. Among the forensic applications, the use of MIP in biological fluid analysis has gained prominence. Biological fluids are complex samples that generally require a pre-treatment to eliminate interfering agents to improve the results of the analyses. In this review, we address the development of this molecular imprinting technology over the years, highlighting the forensic applications of molecularly imprinted polymers in biological sample preparation for analysis of stimulant drugs such as cocaine, amphetamines, and nicotine.

Application of HKUST-1 metal-organic framework as coating for headspace solid-phase microextraction of some addictive drugs

In the present study, a copper-based metal-organic framework (HKUST-1) was used first time for preconcentration trace amounts of addictive drugs in biological samples. HKUST-1 was synthesized and coated onto the surface of stainless steel wire. The prepared coating was used in headspace solid-phase microextraction method coupled with gas chromatography-mass spectrometry for preconcentration and determination of some addictive drugs in biological fluids. Prepared coating shows good extraction efficiency due to large surface area, and π-π stacking interaction with selected analytes. Under optimum conditions, the method was validated with a reasonable determination coefficient (R²  > 0.9961) and suitable linear dynamic range (0.5-1000 μg L^-1 ). Also, the limits of detections were obtained in the range of 0.1-0.4, 0.2-0.6, and 0.4-0.7 μg L^-1 for water, urine, and plasma samples, respectively. The limits of quantification of present method were obtained in the range 0.5-1.3, 0.7-1.5, and 1.0-1.9 μg L^-1 in water, urine, and plasma samples, respectively. The intra-day and inter-dye single fiber and fiber to fiber relative standard deviations were observed in the range 3.0-13.9% and 3.5-12.3%, respectively. Finally, the present method was applied for the determination of the drugs in biological samples.

Miniaturized sample preparation methods for saliva analysis

Saliva, as the first body fluid encountering with the exogenous materials, has good correlation with blood and plays an important role in bioanalysis. However, saliva has not been studied as much as the other biological fluids mainly due to restricted access to its large volumes. In recent years, there is a growing interest for saliva analysis owing to the emergence of miniaturized sample preparation methods. The purpose of this paper is to review all microextraction methods and their principles of operation. In the following, we examine the methods used to analyze saliva up to now and discuss the potential of the other microextraction methods for saliva analysis to encourage research groups for more focus on this important subject area.

Simultaneous determination of cocaine/crack and its metabolites in oral fluid, urine and plasma by liquid chromatography-mass spectrometry and its application in drug users

INTRODUCTION

A single LC-MS equipment was used to validate three methods for simultaneously analyzing cocaine (COC), benzoylecgonine (BZE), cocaethylene (CE), anhydroecgonine methyl ester (AEME) and anhydroecgonine (AEC) in oral fluid (OF), urine and plasma.

METHODS

The methods were carried out using a Kinetex HILIC column for polar compounds at 30°C. Mobile phase with isocratic condition of acetonitrile: 13mM ammonium acetate pH 6.0: methanol (55:35:10 v/v/v) at 0.8mL/min flow rate was used.

RESULTS

After buffer dilution (OF) and protein precipitation (urine and plasma), calibration curve ranges were 4.25-544ng/mL for oral fluid and 5-320ng/mL for urine and plasma with correlation coefficients (r) between 0.9947 and 0.9992. The lowest concentration of the calibration curves were the lower limit of quantification. No major matrix effect could be noted, demonstrating the efficiency of the cleaning procedure.

DISCUSSION

The methods were fully validated and proved to be suitable for analysis of 124 cocaine and/or crack cocaine users. Among the subjects, 56.5% reported daily use of cocaine in the previous three months. Results show a high prevalence of the analytes, with BZE as the most prevalent (94 cases), followed by COC (93 cases), AEC (70 cases), CE (33 cases) and AEME (13 cases). In addition, the concentration of BZE in urine was higher compared to OF and plasma found in the real samples, showing the facility of accumulation in chronic users in matrices with a large detection window.

An overview on forensic analysis devoted to analytical chemists

The present article has as main aim to show analytical chemists interested in forensic analysis the world they will face if decision in favor of being a forensic analytical chemist is adopted. With this purpose, the most outstanding aspects of forensic analysis in dealing with sampling (involving both bodily and no bodily samples), sample preparation, and analytical equipment used in detection, identification and quantitation of key sample components are critically discussed. The role of the great omics in forensic analysis, and the growing role of the youngest of the great omics -metabolomics- are also discussed. The foreseeable role of integrative omics is also outlined.

Stir-membrane liquid microextraction for the determination of paracetamol in human saliva samples

Background: In this article, stir-membrane liquid microextraction is adapted for the analysis of volume-limited biological samples, using as a model analytical problem the determination of paracetamol in human saliva by LC with UV. A three-phase microextraction mode is used for the extraction of the target analyte, taking advantage of its acid–base properties. Results: All the variables involved in the extraction have been studied and optimized in depth. The method has been analytically characterized on the basis of its linearity, sensitivity and precision. The LOD is 0.5 µg/l while the repeatability, expressed as RSD, is better than 14.2 %. A tenfold preconcentration factor was obtained, which involves an absolute recovery value of 25%. Moreover, the relative recovery is very close to the 100%. Conclusion: Finally, the proposed method has been used to perform a PK study of paracetamol.

Comparison of two extraction procedures for determination of drugs of abuse in human saliva by high-performance liquid chromatography

High performance liquid chromatography in combination with diode array detection (HPLC-DAD) was used to determine morphine, 6-acetylmorphine, cocaine, benzoylecgonine, cocaethylene, methadone and 2-ethylene-1,5-dimethyl-3,3,-diphenylpyrrolidine in human saliva. For comparison, samples were prepared by either liquid-liquid extraction in Toxitubes A or microwave-assisted extraction (MAE), by mixing 1 ml of saliva with 10 ml of chloroform and operating at 100 degrees C for 10 min. Acetonitrile and 0.02 m phosphate buffer at pH 6.5 were used as mobile phase in HPLC in gradient mode. The detector response was linear over the drug concentration range of 0.05-2.0 microg ml(-1) in human saliva. The analytical method was validated by determining its precision and accuracy (n = 5), which were lower than 5% as relative standard deviation and 6% as relative error. Limits of detection ranged from 10 to 35 ng ml(-1); mean recoveries of drugs were from 53 to 95% with Toxitubes A and from 83 to 100% with MAE at two different concentrations (0.1 and 1.0 microg ml(-1)). The proposed method was applied to 24 saliva samples from individuals poisoned with opiates and/or cocaine.

Liquid-phase microextraction with porous hollow fibers, a miniaturized and highly flexible format for liquid–liquid extraction

Since 1999, substantial research has been devoted to the development of liquid-phase microextraction (LPME) based on porous hollow fibers. With this technology, target analytes are extracted from aqueous samples, through a thin supported liquid membrane (SLM) sustained in the pores in the wall of a porous hollow fiber, and further into a microL volume of acceptor solution placed inside the lumen of the hollow fiber. After extraction, the acceptor solution is directly subjected to a final chemical analysis by liquid chromatography (HPLC), gas chromatography (GC), capillary electrophoresis (CE), or mass spectrometry (MS). In this review, LPME will be discussed with focus on extraction principles, historical development, fundamental theory, and performance. Also, major applications have been compiled, and recent forefront developments will be discussed.

Determination of phenols in environmental water samples by ionic liquid-based headspace liquid-phase microextraction coupled with high-performance liquid chromatography

Headspace liquid-phase microextraction (HS-LPME) has been applied to efficient enrichment of phenols such as 2-nitrophenol, 4-chlorophenol, 2,4-dichlorophenol, and 2-naphthol from water samples based on 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) as an extractant. Some parameters that may influence HS-LPME were investigated. The linear range was in the range of 0.5-100 microg/L, and the enrichment factors and repeatability (RSD, n = 6) of the proposed method were in the range of 17.2-160.7 and 5.4-8.9%, respectively. The detection limit for each analyte ranged from 0.3 to 0.5 microg/L. Complex matrices of environmental water samples had a small effect on the enrichment, and this problem could be resolved by the addition of sodium ethylene diamine tetraacetate (EDTA) into the samples. The spiked recoveries were in the range of 89.4-114.2%. All these facts demonstrated that the proposed method, with merits of low cost, simplicity, and easy operation, would be a competitive alternative procedure for the determination of such compounds at trace level.

A Hollow Fiber Solvent Microextraction Approach to Measure Drug-Protein Binding

A new direct method has been developed to determine protein-drug binding based on hollow fiber membrane solvent microextraction. Hollow-fiber membrane solvent microextraction coupled with high-performance chromatography with UV detection was employed to evaluate the binding characteristics of drugs to bovine serum albumin (BSA) and blood serum. It was found that the BSA and matrix in the blood serum did not interfere with the measurement. The method is simple and fast. It lacks the drawbacks of some conventional analytical techniques, such as taking much long time and requiring large volume sample consumption.

Drugs in oral fluid Part I. Validation of an analytical procedure for licit and illicit drugs in oral fluid

A qualitative and quantitative analytical method was developed and validated for the determination of 49 licit and illicit drugs in oral fluid. Small oral fluid samples, volume 1mL, were collected from volunteers using a modified Omni-Sal device and the analytes were extracted from an oral fluid/buffer mixture using a single Bond Elut Certify solid phase extraction cartridge. Liquid chromatography-tandem mass spectrometry (LC-MS-MS) and gas chromatography-repetitive full scan mass spectrometry (GC-MS) were used in parallel to analyze the extracts for the targeted drugs. Extracts were analyzed by GC-MS in their underivatized form and as their pentafluoropropionyl derivatives. Deuterated internal standards were used for quantification of drugs of abuse by LC-MS-MS to minimize matrix effects. Methadone-d(9) and tumoxetine were used as the internal standards for quantification of non-derivatized and derivatized analytes respectively by GC-MS. Linearity was demonstrated over the range 5-200 ng/mL and limits of detection were less than 4 ng/mL for each drug analyzed. The method demonstrated acceptable recoveries for most of the analytes and good intra- and inter-day precision. Acquisition of data by repetitive full scan GC-MS allows the addition of further analytes to the target menu.

Liquid-phase microextraction of hydrophilic drugs by carrier-mediated transport

Basic studies on carrier-mediated transport as a mechanism to extract polar drugs by hollow fibre-based liquid-phase microextraction are presented for the first time. Hydrophilic alkaline drugs with log P (octanol/water partition coefficient) values less than 1 were selected as model substances. Sodium octanoate served as carrier and was added to the sample solution at pH 7 to form hydrophobic ion-pair complexes with the analytes. The ion-pair complexes were extracted into octanol as liquid membrane immobilised in the pores of the hollow fibre. Further extraction into an aqueous acceptor phase inside the lumen of the hollow fibre was facilitated by counter transport of protons from the acceptor solution to the sample solution. Protons from the acceptor solution released the analytes at the liquid membrane-acceptor interface and neutralized the carrier. The acceptor phase was analysed by capillary electrophoresis. The studies show that high extraction recoveries of ionic hydrophilic drugs can be obtained at a sample-acceptor volume ratio of 10. Linear calibration graphs and clean electropherograms indicate that carrier-mediated transport is a promising technique in microextraction of polar drugs from biological matrices.

Separation of cocaine stereoisomers by capillary electrophoresis using sulfated cyclodextrins

A capillary electrophoretic method for the separation of cocaine and its stereoisomers was developed. In this study, the effect of organic modifier was also investigated. The separation was achieved using 1% sulfated cyclodextrin, 10 mmol L(-1) phosphate buffer, 10% methanol at pH 3. The method provides good reproducibility and easy application.

Screening method for polycyclic aromatic hydrocarbons in soil using hollow fiber membrane solvent microextraction

A fast, inexpensive screening method for polycyclic aromatic hydrocarbons in soil has been developed. Using hollow fiber membrane solvent microextraction, 8 microl of octane extraction solvent was placed inside a porous, polypropylene fiber. Following an 8 min analyte preconcentration step, 4 microl of extract was injected into a gas chromatograph. Separation was achieved in less than 10 min with a detection limit of 0.13 mg/kg for 2-methylnaphthalene. Results of both spiked and real soil samples are presented.