2-(Trifluoromethyl)acrylic acid: a novel functional monomer in non-covalent molecular imprinting

Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples-a review

Molecularly imprinted polymers (MIP) consist of a molecular recognition technology with applicability in different areas, including forensic chemistry. Among the forensic applications, the use of MIP in biological fluid analysis has gained prominence. Biological fluids are complex samples that generally require a pre-treatment to eliminate interfering agents to improve the results of the analyses. In this review, we address the development of this molecular imprinting technology over the years, highlighting the forensic applications of molecularly imprinted polymers in biological sample preparation for analysis of stimulant drugs such as cocaine, amphetamines, and nicotine.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Molecularly Imprinted Polymer Nanoparticles as Potential Synthetic Antibodies for Immunoprotection against HIV

We describe the preparation and characterization of synthetic antibodies based on molecularly imprinted polymer nanoparticles (MIP-NPs) for the recognition and binding of the highly conserved and specific peptide motif SWSNKS (3S), an epitope of the envelope glycoprotein 41 (gp41) of human immunodeficiency virus type 1 (HIV-1). This motif is implicated in the decline of CD4⁺ T cells and leads to the deterioration of the immune system during HIV infection. Therefore, the development of MIP-NPs that can target and block the 3S peptide to prevent subsequent cascade interactions directed toward the killing of CD4⁺ T cells is of prime importance. Because most antibodies recognize their protein antigen via a conformational or structured epitope (as opposed to a linear epitope commonly used for molecular imprinting), we employed protein molecular modeling to design our template epitope so that it mimics the three-dimensional structure fold of 3S in gp41. The resulting template peptide corresponds to a cyclic structure composed of CGSWSNKSC, with the 3S motif well orientated for imprinting. MIP-NPs with a size of 65 nm were obtained by solid-phase synthesis and were water-soluble. They were prepared by a judicious combination of multiple functional monomers affording hydrogen bonding, ionic, π-π, and hydrophobic interactions, conferring high affinity and selectivity toward both the cyclic peptide and the whole gp41 protein. These results suggest that our MIPs could potentially be used for blocking the function of the 3S motif on the virus.

From imprinting to microcontact imprinting-A new tool to increase selectivity in analytical devices

Molecular imprinting technology has been successfully applied to small molecular templates but a slow progress has been made in macromolecular imprinting owing to the challenges in natural properties of macromolecules, especially proteins. In this review, the macromolecular imprinting approaches are discussed with examples from recent publications. A new molecular imprinting strategy, microcontact imprinting is highlighted with its recent applications.

Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone--application to molecularly imprinted sorbent assays

Biomimetic testosterone receptors were synthesized via molecular imprinting for use as antibody mimics in immunoassays. As evaluated by radioligand binding assays, imprinted polymers prepared in acetonitrile were very specific for testosterone because the nonimprinted control polymers bound virtually no radiolabeled testosterone. The polymers present an appreciable affinity, with association constants of K(a) = 3.3 x 10(7) M(- 1) (high-affinity binding sites). The binding characteristics of the polymers were also evaluated in aqueous environment to study their viabilities as alternatives to antibodies in molecularly imprinted sorbent assays. Compared with the testosterone-specific antibodies present in commercial kits, our molecularly imprinted polymers are somewhat less sensitive but show a high selectivity.

Supramolecular recognition of estrogens via molecularly imprinted polymers

The isolation and preconcentration of estrogens from new types of biological samples (acellular and protein-free simulated body fluid) by molecularly imprinted solid-phase extraction has been described. In this technique, supramolecular receptors, namely molecularly imprinted polymers (MIPs) are used as a sorbent material. The recognition sites of MIPs were prepared by non-covalent multiple interactions and formed with the target 17beta-estradiol as a template molecule. High-performance liquid chromatography with spectroscopic UV, selective, and a sensitive electrochemical CoulArray detector was used for the determination of 17beta-estradiol, estrone, and estriol in simulated body fluid which mimicked human plasma.

Imprinted polymers for chiral resolution of (+/-)-ephedrine. Part 3: NMR predictions and HPLC results with alternative functional monomers

The monomers trifluoromethacrylic acid (TFMAA), 2-hydroxyethylmethacrylate (HEMA) and itaconic acid (IA) have been compared for the molecular imprinting of (-)-ephedrine. Data from NMR titrations were fitted using the program HypNMR to obtain association constants for monomer-template (M-T) complexes of different stoichiometries. These were used to predict the speciation in imprinting mixtures with porogen and cross-linker, and molecularly imprinted polymers (MIPs) were fabricated and their ability to bind (-)-ephedrine and its enantiomer were assessed by high performance liquid chromatography (HPLC). TFMAA and IA interact more strongly with ephedrine than does MAA, yet MIPs made with each of these monomers perform worse. With TFMAA, covalent monomer-template adducts and TFMAA oligomers, present in the polymerisation mixture, may detract from the MIP recognition properties. With IA, the relative flexibility of the monomer may be an issue. HEMA interacts more weakly with ephedrine, and HEMA-based MIPs exhibit much worse retention, and poorer recognition, than those based on MAA. It may be useful to use a higher ratio of M : T in the case of HEMA because the monomer interacts with the cross-linker EDMA.

Non-covalent molecular imprinting with emphasis on its application in separation and drug development

The molecular imprinting technique can be defined as the formation of specific nano-sized cavities by means of template-directed synthesis. The resulting molecularly imprinted polymers (MIPs), which often have an affinity and a selectivity approaching those of antibody-antigen systems, have thus been coined "artificial antibodies." MIPs are characterized by their high specificity, ease of preparation, and their thermal and chemical stability. They have been widely studied in connection with many potential applications, including their use for separation and isolation purposes, as antibody mimics (biomimetic assays and sensors), as enzyme mimics, in organic synthesis, and in drug delivery. The non-covalent imprinting approach, developed mainly in Lund, has proven to be more versatile than the alternative covalent approach because of its preparation being less complicated and of the broad selection of functional monomers and possible target molecules that are available. The paper presents a review of studies of this versatile technique in the areas of separation and drug development, with emphasis being placed on work carried out in our laboratory.

Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003

Over 1450 references to original papers, reviews and monographs have herein been collected to document the development of molecular imprinting science and technology from the serendipitous discovery of Polyakov in 1931 to recent attempts to implement and understand the principles underlying the technique and its use in a range of application areas. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by papers dealing with fundamental aspects of molecular imprinting and the development of novel polymer formats. Thereafter, literature describing attempts to apply these polymeric materials to a range of application areas is presented.

Uniformly sized molecularly imprinted polymer for atropine and its application to the determination of atropine and scopolamine in pharmaceutical preparations containing Scopolia extract

A uniformly sized molecularly imprinted polymer (MIP) for atropine has been prepared. The MIP was prepared using 2-(trifluoromethyl) acrylic acid and ethylene glycol dimethacrylate as a functional monomer and cross-linker, respectively, by a multi-step swelling and thermal polymerization method. The selectivity factor, which is defined as the ratio of the retention factors (k) on the molecularly imprinted and non-imprinted polymers, k(imprinted)/k(non-imprinted), was 2.2 for atropine on the MIP. The obtained MIP was applied for the determination of tropane alkaloids (atropine and scopolamine) in a commercial gastrointestinal drug by a column-switching HPLC system, consisting of an MIP material as a pre-column, and a conventional cation-exchange analytical column. An interference peak was observed at the retention time of atropine derived from pre-column. However, since the peak area was less than 0.5% the peak area of atropine of a standard solution under the analytical conditions of this study (0.2 microg of atropine was loaded), this interference was negligible in the determination of atropine. On the other hand, no interference peak was observed at the retention time of scopolamine. Calibration curves of atropine and scopolamine showed good linearity in the range of 0.02-0.9 microg/ml (r=0.9999) and 0.003-0.09 microg/ml (r=0.9998), respectively. The mean recoveries of atropine and scopolamine from a placebo pharmaceutical preparation sample were 98.9 and 99.9%, respectively. The intra-day precision (measured by relative standard deviation, R.S.D. (%)) of both ingredients was less than 2.0%. The optimized column-switching system was applied successfully to the determination of atropine and scopolamine in a commercial gastrointestinal drug.

Nuclear magnetic resonance study of the molecular imprinting of (−)-nicotine: template self-association, a molecular basis for cooperative ligand binding

In the present study, the interactions of components in a (-)-nicotine molecular imprinting polymerization mixture have been studied by 1H NMR spectroscopy. The dissociation constants for complexation of template by a functional monomer analogue, acetic acid, have been determined. Nicotine was shown to self-associate at concentrations comparable to those used in previous molecular imprinting studies (app K(diss) = 0.082M in CDCl3 at 298 K). The extent of self-association was enhanced by the presence of acetic acid. Previous studies on (-)-nicotine-imprinted methacrylic acid-ethylene dimethacrylate co-polymers suggested the involvement of recognition sites for template-template complexes. Collectively these results provide the first direct evidence for the presence of template-template complexes, and support the previously hypothesized basis for cooperative ligand recognition events in this polymer system.

A study of a new TSM bio-mimetic sensor using a molecularly imprinted polymer coating and its application for the determination of nicotine in human serum and urine

A new bio-mimetic quartz crystal thickness-shear-mode (TSM) sensor, using an imprinted polymer coating as the sensitive material, has been fabricated and applied to the determination of nicotine (NIC) in human serum and urine. The molecularly imprinted polymer (MIP) was synthesized using NIC as the template molecule and methacrylic acid (MAA) as the functional monomer. The sensor showed high selectivity and a sensitive response to NIC in aqueous system. The linear response range of the sensor was between 5.0 x 10(-8) and 1.0 x 10(-4) M with a detection limit of 2.5 x 10(-8) M. The viscoelasticity of the coating in the air and in liquid has been studied by the impedance spectrum. The MIP sensor was stable and exhibited effective reproducibility. Satisfactory results were achieved in the detection of the real samples.

Molecularly imprinted fluorescent-shift receptors prepared with 2-(trifluoromethyl)acrylic acid

Methacrylic acid (MAA) and 2-(trifluoromethyl)acrylic acid (TFMAA) were used to prepare molecularly imprinted polymers exhibiting diastereoselectivity for cinchona alkaloids. Fluorescent spectra of the cinchona alkaloid exhibit a characteristic shift through binding to these polymer particles, originating most likely from the highly acidic residues in the imprinted polymers acting as a proton donator. Our results show that TFMAA based imprinted polymers can be used as polymer reagents for quantitating the cinchona alkaloid bound to the polymers without bound/free separation.

Separation and sensing based on molecular recognition using molecularly imprinted polymers

Molecular recognition-based separation and sensing systems have received much attention in various fields because of their high selectivity for target molecules. Molecular imprinting has been recognized as a promising technique for the development of such systems, where the molecule to be recognized is added to a reaction mixture of a cross-linker(s), a solvent(s), and a functional monomer(s) that possesses a functional groups(s) capable of interacting with the target molecule. Binding sites in the resultant polymers involve functional groups originating from the added functional monomer(s), which can be constructed according to the shape and chemical properties of the target molecules. After removal of the target molecules, these molecularly imprinted complementary binding sites exhibit high selectivity and affinity for the template molecule. In this article, recent developments in molecularly imprinted polymers are described with their applications as separation media in liquid chromatography, capillary electrophoresis, solid-phase extraction, and membranes. Examples of binding assays and sensing systems using molecularly imprinted polymers are also presented.

Analysis of nicotine and its oxidation products in nicotine chewing gum by a molecularly imprinted solid-phase extraction

Chromatographic stationary phases showing exceptional selectivity for nicotine can be prepared by the technique of molecular imprinting. Such phases were used in the search for a rapid cleanup step for nicotine and some of its oxidation products in chewing gum formulations. Thus, using an organic mobile phase, the nicotine analytes from chewing gums dissolved in nonpolar solvent were retained, whereas the nonpolar matrix eluted close to the void peak. A subsequent switch to an acidic mobile phase resulted in elution of the analytes as one sharp peak. Due to weak binding of the less basic oxidation products, other imprinted polymers were tested, and the solid-phase extraction procedure was optimized. Polymers were prepared using various functional and cross-linking monomers, templates, porogens and thermal treatments. This resulted in phases that, when compared with a nonimprinted or a C18 reversed-phase column, showed significantly higher recoveries of the analytes. Furthermore, no bleeding of template from the phases could be detected. The cleanup step was coupled off-line to reversed-phase HPLC, and the efficiency of the analysis was compared with and without the cleanup step. Three out of four analytes were quantitatively recovered using the imprinted phase, whereas, using the nonimprinted phase, only nicotine was recovered. Without the cleanup step, none of the analytes could be determined using the reversed-phase HPLC method.