Insertion of carrier proteins into hydrophilic loops of the Escherichia coli lactose permease

Membrane Protein Production and Purification from Escherichia coli and Sf9 Insect Cells

A major obstacle to studying membrane proteins by biophysical techniques is the difficulty in producing sufficient amounts of materials for functional and structural studies. To overexpress the target membrane protein heterologously, especially an eukaryotic protein, a key step is to find the optimal host expression system and perform subsequent expression optimization. In this chapter, we describe protocols for screening membrane protein production using bacterial and insect cells, solubilization screening, large-scale production, and commonly used affinity chromatography purification methods. We discuss general optimization conditions, such as promoters and tags, and describe current techniques that can be used in any laboratory without specialized expensive equipment. Especially for insect cells, GFP fusions are particularly useful for localization and in-gel fluorescence detection of the proteins on SDS-PAGE. We give detailed protocols that can be used to screen the best expression and purification conditions for membrane protein study.

Engineering and purification of a thermostable, high-yield, variant of PfCRT, the Plasmodium falciparum chloroquine resistance transporter

Historically chloroquine was used to treat the most deadly form of malaria, caused by the parasite Plasmodium falciparum. The selective pressure of chloroquine therapy led to the rapid emergence of chloroquine resistant parasites. Resistance has been attributed to the Plasmodium falciparum Chloroquine Resistance Transporter (PfCRT), an integral membrane protein of unknown structure. A PfCRT structure would provide new insights into how the protein confers chloroquine resistance and thereby also yield novel opportunities for developing anti-malarial therapies. Although PfCRT is an attractive target for characterisation and structure determination, very little work has been published on its expression and purification. Here we present a medium throughput protocol, employing Sf9 insect cells, for testing the expression, stability and purification yield of rationally designed PfCRT mutant constructs and constructs of a PfCRT orthologue from Neospora caninum (NcCRT). We have identified a conserved cysteine residue in PfCRT that results in elevated protein stability when mutated. Combining this mutation with the insertion of T4-lysozyme into a specific surface loop further augments PfCRT protein yield and thermostability. Screening also identified an NcCRT construct with an elevated purification yield. Furthermore it was possible to purify both PfCRT and NcCRT constructs at milligram-scales, with high purities and with size exclusion chromatography profiles that were consistent with monodispersed, homogeneous protein.

The "Sticky Patch" Model of Crystallization and Modification of Proteins for Enhanced Crystallizability

Crystallization of macromolecules has long been perceived as a stochastic process, which cannot be predicted or controlled. This is consistent with another popular notion that the interactions of molecules within the crystal, i.e., crystal contacts, are essentially random and devoid of specific physicochemical features. In contrast, functionally relevant surfaces, such as oligomerization interfaces and specific protein-protein interaction sites, are under evolutionary pressures so their amino acid composition, structure, and topology are distinct. However, current theoretical and experimental studies are significantly changing our understanding of the nature of crystallization. The increasingly popular "sticky patch" model, derived from soft matter physics, describes crystallization as a process driven by interactions between select, specific surface patches, with properties thermodynamically favorable for cohesive interactions. Independent support for this model comes from various sources including structural studies and bioinformatics. Proteins that are recalcitrant to crystallization can be modified for enhanced crystallizability through chemical or mutational modification of their surface to effectively engineer "sticky patches" which would drive crystallization. Here, we discuss the current state of knowledge of the relationship between the microscopic properties of the target macromolecule and its crystallizability, focusing on the "sticky patch" model. We discuss state-of-the-art in silico methods that evaluate the propensity of a given target protein to form crystals based on these relationships, with the objective to design variants with modified molecular surface properties and enhanced crystallization propensity. We illustrate this discussion with specific cases where these approaches allowed to generate crystals suitable for structural analysis.

Current strategies for protein production and purification enabling membrane protein structural biology

Membrane proteins are still heavily under-represented in the protein data bank (PDB), owing to multiple bottlenecks. The typical low abundance of membrane proteins in their natural hosts makes it necessary to overexpress these proteins either in heterologous systems or through in vitro translation/cell-free expression. Heterologous expression of proteins, in turn, leads to multiple obstacles, owing to the unpredictability of compatibility of the target protein for expression in a given host. The highly hydrophobic and (or) amphipathic nature of membrane proteins also leads to challenges in producing a homogeneous, stable, and pure sample for structural studies. Circumventing these hurdles has become possible through the introduction of novel protein production protocols; efficient protein isolation and sample preparation methods; and, improvement in hardware and software for structural characterization. Combined, these advances have made the past 10-15 years very exciting and eventful for the field of membrane protein structural biology, with an exponential growth in the number of solved membrane protein structures. In this review, we focus on both the advances and diversity of protein production and purification methods that have allowed this growth in structural knowledge of membrane proteins through X-ray crystallography, nuclear magnetic resonance (NMR) spectroscopy, and cryo-electron microscopy (cryo-EM).

β2-Adrenergic Receptor Conformational Response to Fusion Protein in the Third Intracellular Loop

Fluorine-19 nuclear magnetic resonance (NMR) was used to study conformational equilibria at the intracellular tips of helices VI and VII in a variant β₂-adrenergic receptor (β₂AR) containing T4-lysozyme fused into the third intracellular loop (β₂AR-T4L), a G protein-coupled receptor (GPCR) modification widely used in crystal structure determination. G-protein signaling at helix VI showed nearly complete population of an active-like state for all ligand efficacies in the absence of an intracellular protein. For arrestin signaling at helix VII, a native-like equilibrium was observed, except for complexes with ligands devoid of a hydrophobic moiety at the ethanolamine end. These data confirm that response of G-protein and arrestin signaling to ligand efficacy is not coupled, and presents evidence for long-range effects between fusion protein and orthosteric binding cavity, which are suppressed by voluminous bound ligands. Solution NMR thus provides complementary information, which should be considered in functional interpretations of GPCR crystal structures obtained with ICL3 fusions.

Generating Recombinant Antibodies to Membrane Proteins through Phage Display

One of the most important classes of proteins in terms of drug targets is cell surface membrane proteins, and yet it is a challenging set of proteins for generating high-quality affinity reagents. In this review, we focus on the use of phage libraries, which display antibody fragments, for generating recombinant antibodies to membrane proteins. Such affinity reagents generally have high specificity and affinity for their targets. They have been used for cell staining, for promoting protein crystallization to solve three-dimensional structures, for diagnostics, and for treating diseases as therapeutics. We cover publications on this topic from the past 10 years, with a focus on the various formats of membrane proteins for affinity selection and the diverse affinity selection strategies used. Lastly, we discuss the challenges faced in this field and provide possible directions for future efforts.

Enzymatic functionalization of a nanobody using protein insertion technology

Antibody-based products constitute one of the most attractive biological molecules for diagnostic, medical imagery and therapeutic purposes with very few side effects. Their development has become a major priority of biotech and pharmaceutical industries. Recently, a growing number of modified antibody-based products have emerged including fragments, multi-specific and conjugate antibodies. In this study, using protein engineering, we have functionalized the anti-hen egg-white lysozyme (HEWL) camelid VHH antibody fragment (cAb-Lys3), by insertion into a solvent-exposed loop of the Bacillus licheniformis β-lactamase BlaP. We showed that the generated hybrid protein conserved its enzymatic activity while the displayed nanobody retains its ability to inhibit HEWL with a nanomolar affinity range. Then, we successfully implemented the functionalized cAb-Lys3 in enzyme-linked immunosorbent assay, potentiometric biosensor and drug screening assays. The hybrid protein was also expressed on the surface of phage particles and, in this context, was able to interact specifically with HEWL while the β-lactamase activity was used to monitor phage interactions. Finally, using thrombin-cleavage sites surrounding the permissive insertion site in the β-lactamase, we reported an expression system in which the nanobody can be easily separated from its carrier protein. Altogether, our study shows that insertion into the BlaP β-lactamase constitutes a suitable technology to functionalize nanobodies and allows the creation of versatile tools that can be used in innovative biotechnological assays.

Split green fluorescent protein as a modular binding partner for protein crystallization

A modular strategy for protein crystallization using split green fluorescent protein (GFP) as a crystallization partner is demonstrated. Insertion of a hairpin containing GFP β-strands 10 and 11 into a surface loop of a target protein provides two chain crossings between the target and the reconstituted GFP compared with the single connection afforded by terminal GFP fusions. This strategy was tested by inserting this hairpin into a loop of another fluorescent protein, sfCherry. The crystal structure of the sfCherry-GFP(10-11) hairpin in complex with GFP(1-9) was determined at a resolution of 2.6 Å. Analysis of the complex shows that the reconstituted GFP is attached to the target protein (sfCherry) in a structurally ordered way. This work opens the way to rapidly creating crystallization variants by reconstituting a target protein bearing the GFP(10-11) hairpin with a variety of GFP(1-9) mutants engineered for favorable crystallization.

Fusion partner toolchest for the stabilization and crystallization of G protein-coupled receptors

Structural studies of human G protein-coupled receptors (GPCRs) have recently been accelerated through the use of a fusion partner that was inserted into the third intracellular loop. Using chimeras of the human β(2)-adrenergic and human A(2A) adenosine receptors, we present the methodology and data for the initial selection of an expanded set of fusion partners for crystallizing GPCRs. In particular, use of the thermostabilized apocytochrome b(562)RIL as a fusion partner displays certain advantages over previously utilized fusion proteins, resulting in a significant improvement in stability and structure of GPCR-fusion constructs.

Functional fusions of T4 lysozyme in the third intracellular loop of a G protein-coupled receptor identified by a random screening approach in yeast

The insertion of a stable soluble protein into loops of transmembrane proteins has proved to be a successful approach for enhancing their stabilities and crystallization, and may also be useful in contexts where the inserted proteins can modulate or report on the activities of membrane proteins. While the use of T4 lysozyme to replace portions of the third intracellular loops of G protein-coupled receptors (GPCRs) has allowed determination of the structures of members of this important class of receptors, the creation of such fusion proteins generally leads to loss of signaling function of the resulting fusion protein, since the third intracellular loops of GPCRs play critical roles in their interactions with G proteins. We describe here a random screening approach allowing insertion of T4 lysozyme into diverse positions in the third loop of the yeast α-pheromone receptor, a GPCR encoded by the yeast STE2 gene. Insertions were accompanied by varying extents of deletion or duplication of the loop. A set of phenotypic screens allow detection of potentially rare variant receptors that are expressed, bind to agonist and are capable of signal transduction via activation of the cognate G protein. A large fraction of screened full-length receptor variants containing at least partial duplications of the loop on either side of the inserted T4 lysozyme retain the ability to activate the downstream signaling pathway in response to binding of ligand. However, we were unable to identify any receptors with truncated C-termini that retain significant signaling function in the presence of inserted T4 lysozyme. Our results establish the feasibility of creating functional receptors containing insertions of T4 lysozyme in their third intracellular loops.

A crystal clear solution for determining G-protein-coupled receptor structures

G-protein-coupled receptors (GPCRs) are medically important membrane proteins that are targeted by over 30% of small molecule drugs. At the time of writing, 15 unique GPCR structures have been determined, with 77 structures deposited in the PDB database, which offers new opportunities for drug development and for understanding the molecular mechanisms of GPCR activation. Many different factors have contributed to this success, but if there is one single factor that can be singled out as the foundation for producing well-diffracting GPCR crystals, it is the stabilisation of the detergent-solubilised receptor-ligand complex. This review will focus predominantly on one of the successful strategies for the stabilisation of GPCRs, namely the thermostabilisation of GPCRs using systematic mutagenesis coupled with thermostability assays. Structures of thermostabilised GPCRs bound to a wide variety of ligands have been determined, which has led to an understanding of ligand specificity; why some ligands act as agonists as opposed to partial or inverse agonists; and the structural basis for receptor activation.

Application of protein engineering to enhance crystallizability and improve crystal properties

Until recently, protein crystallization has mostly been regarded as a stochastic event over which the investigator has little or no control. With the dramatic technological advances in synchrotron-radiation sources and detectors and the equally impressive progress in crystallographic software, including automated model building and validation, crystallization has increasingly become the rate-limiting step in X-ray diffraction studies of macromolecules. However, with the advent of recombinant methods it has also become possible to engineer target proteins and their complexes for higher propensity to form crystals with desirable X-ray diffraction qualities. As most proteins that are under investigation today are obtained by heterologous overexpression, these techniques hold the promise of becoming routine tools with the potential to transform classical crystallization screening into a more rational high-success-rate approach. This article presents an overview of protein-engineering methods designed to enhance crystallizability and discusses a number of examples of their successful application.

The 2.6 angstrom crystal structure of a human A2A adenosine receptor bound to an antagonist

The adenosine class of heterotrimeric guanine nucleotide-binding protein (G protein)-coupled receptors (GPCRs) mediates the important role of extracellular adenosine in many physiological processes and is antagonized by caffeine. We have determined the crystal structure of the human A2A adenosine receptor, in complex with a high-affinity subtype-selective antagonist, ZM241385, to 2.6 angstrom resolution. Four disulfide bridges in the extracellular domain, combined with a subtle repacking of the transmembrane helices relative to the adrenergic and rhodopsin receptor structures, define a pocket distinct from that of other structurally determined GPCRs. The arrangement allows for the binding of the antagonist in an extended conformation, perpendicular to the membrane plane. The binding site highlights an integral role for the extracellular loops, together with the helical core, in ligand recognition by this class of GPCRs and suggests a role for ZM241385 in restricting the movement of a tryptophan residue important in the activation mechanism of the class A receptors.

Functional characterization and purification of a Saccharomyces cerevisiae ADP/ATP carrier-iso 1 cytochrome c fusion protein

A recombinant fusion protein combining the mitochondrial ADP/ATP carrier (Anc2p) and the iso-1-cytochrome c (Cyc1p), both from Saccharomyces cerevisiae, has been genetically elaborated with the aim of increasing the polar surface area of the carrier to facilitate its crystallization. The gene encoding the his-tagged fusion protein was expressed in yeast under the control of the regulatory sequences of ScANC2. The chimeric carrier, Anc2-Cyc1(His6)p, was able to restore growth on a non-fermentable carbon source of a yeast strain devoid of functional ADP/ATP carrier, which demonstrated its transport activity. The kinetic exchange properties of Anc2-Cyc1(His6)p and the wild type his-tagged carrier Anc2(His6)p were very similar. However, Anc2-Cyc1(His6)p restored cell growth less efficiently than Anc2(His6)p which correlates with the lower amount found in mitochondria. Purification of Anc2-Cyc1(His6)p in complex with carboxyatractyloside (CATR), a high affinity inhibitor of ADP/ATP transport, was achieved by combining ion-exchange chromatography and ion-metal affinity chromatography in the presence of LAPAO, an aminoxide detergent. As characterized by absorption in the visible range, heme was found to be present in isolated Anc2-Cyc1(His6)p, giving the protein a red color. Large-scale purification of Anc2-Cyc1(His6)p-CATR complex opens up novel possibilities for the use of crystallographic approaches to the yeast ADP/ATP carrier.

Lipopeptide detergents designed for the structural study of membrane proteins

The structural study of membrane proteins requires detergents that can effectively mimic lipid bilayers, and the choice of detergent is often a compromise between detergents that promote protein stability and detergents that form small micelles. We describe lipopeptide detergents (LPDs), a new class of amphiphile consisting of a peptide scaffold that supports two alkyl chains, one anchored to each end of an alpha-helix. The goal was to design a molecule that could self-assemble into a cylindrical micelle with a rigid outer hydrophilic shell surrounding an inner lipidic core. Consistent with this design, LPDs self-assemble into small micelles, can disperse phospholipid membranes, and are gentle, nondenaturing detergents that preserve the structure of the membrane proteins in solution for extended periods of time. The LPD design allows for a membrane-like packing of the alkyl chains in the core of the molecular assemblies, possibly explaining their superior properties relative to traditional detergents in stabilizing membrane protein structures.

Stability of the lactose permease in detergent solutions

Protein stability, as measured by irreversible protein aggregation, is one of the central difficulties in the handling of detergent-solubilized membrane proteins. We present a quantitative analysis of the stability of the Escherichia coli lactose (lac) permease and a series of lac permease fusion proteins containing an insertion of cytochrome(b562), T4 lysozyme or beta-lactamase in the central hydrophilic loop of the permease. The stability of the proteins was evaluated under a variety of storage conditions by both a qualitative SDS-PAGE assay and by a quantitative hplc assay. Long-chain maltoside detergents were more effective at maintaining purified protein in solution than detergents with smaller head groups and/or shorter alkyl tails. A full factorial experiment established that the proteins were insensitive to sodium chloride concentrations, but greatly stabilized by glycerol, low temperature and the combination of glycerol and low temperature. The accurate quantitation of the protein by absorbance spectroscopy required exclusion of all contact with clarified polypropylene or polyvinyl chloride (PVC) materials. Although some of the fusion proteins were more prone to aggregation than the wild-type permease, the stability of a fusion protein containing a cytochrome(b562) insertion was indistinguishable from that of native lac permease.