Planar lipid bilayers on solid supports from liposomes--factors of importance for kinetics and stability

Suspended phospholipid bilayers: A new biological membrane mimetic

HYPOTHESIS

The attractive interaction between a cationic surfactant monolayer at the air-water interface and vesicles, incorporating anionic lipids, is sufficient to drive the adsorption and deformation of the vesicles. Osmotic rupture of the vesicles produces a continuous lipid bilayer beneath the monolayer.

EXPERIMENTAL

Specular neutron reflectivity has been measured from the surface of a purpose-built laminar flow trough, which allows for rapid adsorption of vesicles, the changes in salt concentration required for osmotic rupture of the adsorbed vesicles into a bilayer, and for neutron contrast variation of the sub-phase without disturbing the monolayer.

FINDINGS

The neutron reflectivity profiles measured after vesicle addition are consistent with the adsorption and flattening of the vesicles beneath the monolayer. An increase in the buffer salt concentration results in further flattening and fusion of the adsorbed vesicles, which are ruptured by a subsequent decrease in the salt concentration. This process results in a continuous, high coverage, bilayer suspended 11 Åbeneath the monolayer. As the bilayer is not constrained by a solid substrate, this new mimetic is well-suited to studying the structure of lipid bilayers that include transmembrane proteins.

Driven Engulfment of Janus Particles by Giant Vesicles in and out of Thermal Equilibrium

The interaction between Janus colloids and giant lipid vesicles was experimentally investigated to elucidate the dynamics and mechanisms related to microparticle engulfment by lipid vesicles. Janus (Pt–SiO₂ and Pt–MF, where MF is melamine formaldehyde) colloids do not spontaneously adhere to POPC or DOPC bilayers, but by applying external forces via centrifugation we were able to force the contact between the particles and the membranes, which may result in a partial engulfment state of the particle. Surface properties of the Janus colloids play a crucial role in the driven particle engulfment by vesicles. Engulfment of the silica and platinum regions of the Janus particles can be observed, whereas the polymer (MF) region does not show any affinity towards the lipid bilayer. By using fluorescence microscopy, we were able to monitor the particle orientation and measure the rotational dynamics of a single Janus particle engulfed by a vesicle. By adding hydrogen peroxide to the solution, particle self-propulsion was used to perform an active transport of a giant vesicle by a single active particle. Finally, we observe that partially engulfed particles experience a membrane curvature-induced force, which pushes the colloids towards the bottom where the membrane curvature is the lowest.

Tuning lipid layer formation on particle surfaces by using DNA-containing recruiter molecules

Biofunctional interfaces containing DNA-conjugated molecules have been explored for various bioengineering applications. However, there is still a lack of understanding of the interaction between DNA conjugates and surrounding biomolecules. In this study, we prepare DNA-containing recruiter molecules and incorporate them onto DNA immobilized gold nanoparticles through DNA hybridization. Liposomes composed of different phospholipids are then applied to investigate supported lipid layer formation on these recruiter-containing surfaces. We find that the morphology and the amount of lipid layers formed are determined by both the liposome concentration and the type of recruiter molecule. When liposomes are applied in excess above a critical concentration, surface chemistry determines the lipid layers formed, leading to lipid multilayers on hydrophilic DNA recruiter containing surfaces and lipid monolayers on hydrophobic DNA-lipid recruiter containing surfaces. When the liposome concentration is below the critical value, the surface molecules take on a more direct role and recruit lipids through hydrophobic interaction. The total amount of the lipid layers formed is further modulated by the overall charge and the fluidity of the liposomes applied. These results provide quantitative analysis on the interaction of DNA conjugates with lipid molecules and introduce a new approach to fine-tune lipid layer formation behavior.

A quantitative determination of lipid bilayer deposition efficiency using AFM

The efficacy of a number of different methods for depositing a dimyristoylphosphatidylcholine (DMPC) lipid bilayer or DMPC-cholesterol (3 : 1) mixed bilayer onto a silicon substrate has been investigated in a quantitative manner using atomic force microscopy (AFM) image analysis to extract surface coverage. Complementary AFM-IR measurements were used to confirm the presence of the lipids. For the Langmuir-Blodgett/Schaefer deposition method at temperatures below the chain-melting transition temperature (T m), a large number of bilayer defects resulted when DMPC was deposited from a water subphase. Addition of calcium ions to the trough led to smaller, more frequent defects, whereas addition of cholesterol to the lipid mixture led to a vast improvement in bilayer coverage. Poor coverage was achieved for deposition at temperatures above T m. Formation of the deposited bilayer from vesicle fusion proved a more reliable method for all systems, with formation of near-complete bilayers within 60 seconds at temperatures above T m, although this method led to a higher probability of multilayer formation and rougher bilayer surfaces.

Structure, Formation, and Biological Interactions of Supported Lipid Bilayers (SLB) Incorporating Lipopolysaccharide

Biomimetic membrane systems play a crucial role in the field of biosensor engineering. Over the years, significant progress has been achieved creating artificial membranes by various strategies from vesicle fusion to Langmuir transfer approaches to meet an ever-growing demand for supported lipid bilayers on various substrates such as glass, mica, gold, polymer cushions, and many more. This paper reviews the diversity seen in the preparation of biologically relevant model lipid membranes which includes monolayers and bilayers of phospholipid and other crucial components such as proteins, characterization techniques, changes in the physical properties of the membranes during molecular interactions and the dynamics of the lipid membrane with biologically active molecules with special emphasis on lipopolysaccharides (LPS).

Lipid monolayer as a simple model membrane for comparative assessment of the photodynamic therapy photosensitizer efficiency via macroscopic measurements

Cellular membrane is one of the main targets of photodynamic therapy. Its high complexity has led to the study of the efficiency of photosensitizers on artificial lipid systems mimicking membranes. However, the preliminary analysis of this efficiency remains limited due to difficulty of the model construction and/or implementation of the required measurement techniques. Hereby, we propose a quite simple way for the rapid comparative assessment of novel photosensitizers in terms of membrane photodegradation, based on simple and fast measurements, such as wetting angle and surface plasmon resonance spectroscopy. As a proof of concept, we applied this methodology to two bacteriopurpurinimide derivatives. We have shown in particular that such complementary techniques can be employed not only for the multiparametric monitoring of the kinetics of the photodegradation, but also for the comparison of the damaging efficiency of the photosensitizers in the lipid structures as well.

An enzyme-modified capillary as a platform for simultaneous fluorometric detection of d-glucose and l- lactate

The preparation of a glass capillary pattered with lipid layers　on which lactate dehydrogenase (LDH) and glucose dehydrogenase (GDH) were regionally adsorbed and its application for simultaneous detection of d-glucose and l-lactate in human serum is described. A lipid layer was formed on the surface of BSA-unabsorbed octadecyltrichlorosilane (OTS) inner wall of a glass capillary. The electrostatic charge of the lipid layer was a key factor for adsorbing the enzymes on the lipid layer. The fluorescence intensities were observed at each enzyme site in the presence of diaphorase (DIA), β-nicotinamide-adenine dinucleotide oxidized (NAD), resazurin, d-glucose and l-lactate. The fluorescence intensities at each enzyme site increased with an increase in the concentration of d-glucose and l-lactate=with the detection limits of 32 μM and 4.9 μM, respectively.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Scaffolds that mimic antigen-presenting cells enable ex vivo expansion of primary T cells

Therapeutic ex vivo T-cell expansion is limited by low rates and T-cell products of limited functionality. Here we describe a system that mimics natural antigen-presenting cells (APCs) and consists of a fluid lipid bilayer supported by mesoporous silica micro-rods. The lipid bilayer presents membrane-bound cues for T-cell receptor stimulation and costimulation, while the micro-rods enable sustained release of soluble paracrine cues. Using anti-CD3, anti-CD28, and interleukin-2, we show that the APC-mimetic scaffolds (APC-ms) promote two- to tenfold greater polyclonal expansion of primary mouse and human T cells compared with commercial expansion beads (Dynabeads). The efficiency of expansion depends on the density of stimulatory cues and the amount of material in the starting culture. Following a single stimulation, APC-ms enables antigen-specific expansion of rare cytotoxic T-cell subpopulations at a greater magnitude than autologous monocyte-derived dendritic cells after 2 weeks. APC-ms support over fivefold greater expansion of restimulated CD19 CAR-T cells than Dynabeads, with similar efficacy in a xenograft lymphoma model.

Orientation and density control of proteins on solid matters by outer membrane coating: Analytical and diagnostic applications

Autodisplay is an expression system for the display of recombinant proteins on the outer membrane (OM) of gram negative bacteria and has been developed for translocation studies, whole cell biocatalysis, bioremediation, inhibitor screening, and enzyme refolding. Recently, affinity proteins such as IgG-binding Z-domains and biotin-binding streptavidin have been autodisplayed on the OM of Escherichia coli for analytical and biomedical applications. The secretion mechanism of the autodisplay system was used and orientation and density control of these affinity proteins were determined. Affinity protein-autodisplaying E. coli cells have been used to coat solid supports in immunoassays. For this purpose, the OM of autodisplayed E. coli cells was separated and isolated by the aid of detergents. The structure of the resulting OM liposomes as well as their physico-chemical parameters, were analyzed. OM liposomes were used subsequently for coating various solid matters including microplates and biosensor transducer surfaces and the formation of OM layers were monitored. OM layer formation on solid matters was shown to increase the sensitivity of immunoassays and biosensors. In this review, analytical and diagnostic applications are described in particular concerning orientation and density control of autodisplayed affinity proteins.

Dual Functional LipoMET Mediates Envelope-type Nanoparticles to Combinational Oncogene Silencing and Tumor Growth Inhibition

The success of small interfering RNA (siRNA)-mediated gene silencing for cancer therapy is still limited because of its instability and poor intracellular internalization. Traditional cationic carriers cannot adequately meet the need for clinical application of siRNA. We herein report a dual-functional liposome containing a cholesterol derivative of metformin, i.e., LipoMET, which takes advantage of the fusogenic activity as well as intrinsic tumor apoptosis inducing ability of biguanide moiety to achieve a combinational anti-oncogenic effect. In this study, the vascular endothelial growth factor (VEGF)-specific siRNAs were first electrostatically condensed into a ternary nanocomplex composed of polycation and hyaluronate, which was subsequently enveloped by LipoMET through membrane fusion. In comparison with common cationic control group, the resulting envelope-type nanoparticles (PH@LipoMET nanoparticles [NPs]) showed the ability of rapid cellular internalization and effective endosomal escape of siRNA during intracellular trafficking studies. Systemic administration of the targeted LipoMETs was capable of inducing apoptosis and tumor growth inhibition in the NCI-H460 xenograft model. When carrying VEGF-specific siRNAs, PH@LipoMET NPs remarkably downregulated the expression of VEGF and led to even more tumor suppression in vivo. Thus, LipoMET originated envelope-type nanoparticles may serve as a potential dual-functional siRNA delivery system to improve therapeutic effect of oncogene silencing.

Nanoparticle mechanics: deformation detection via nanopore resistive pulse sensing

Solid-state nanopores have been widely used in the past for single-particle analysis of nanoparticles, liposomes, exosomes and viruses. The shape of soft particles, particularly liposomes with a bilayer membrane, can greatly differ inside the nanopore compared to bulk solution as the electric field inside the nanopores can cause liposome electrodeformation. Such deformations can compromise size measurement and characterization of particles, but are often neglected in nanopore resistive pulse sensing. In this paper, we investigated the deformation of various liposomes inside nanopores. We observed a significant difference in resistive pulse characteristics between soft liposomes and rigid polystyrene nanoparticles especially at higher applied voltages. We used theoretical simulations to demonstrate that the difference can be explained by shape deformation of liposomes as they translocate through the nanopores. Comparing our results with the findings from electrodeformation experiments, we demonstrated that the rigidity of liposomes can be qualitatively compared using resistive pulse characteristics. This application of nanopores can provide new opportunities to study the mechanics at the nanoscale, to investigate properties of great value in fundamental biophysics and cellular mechanobiology, such as virus deformability and fusogenicity, and in applied sciences for designing novel drug/gene delivery systems.

Epsin N-terminal Homology Domain (ENTH) Activity as a Function of Membrane Tension

The epsin N-terminal homology domain (ENTH) is a major player in clathrin-mediated endocytosis. To investigate the influence of initial membrane tension on ENTH binding and activity, we established a bilayer system based on adhered giant unilamellar vesicles (GUVs) to be able to control and adjust the membrane tension σ covering a broad regime. The shape of each individual adhered GUV as well as its adhesion area was monitored by spinning disc confocal laser microscopy. Control of σ in a range of 0.08-1.02 mN/m was achieved by altering the Mg(2+) concentration in solution, which changes the surface adhesion energy per unit area of the GUVs. Specific binding of ENTH to phosphatidylinositol 4,5-bisphosphate leads to a substantial increase in adhesion area of the sessile GUV. At low tension (<0.1 mN/m) binding of ENTH can induce tubular structures, whereas at higher membrane tension the ENTH interaction deflates the sessile GUV and thereby increases the adhesion area. The increase in adhesion area is mainly attributed to a decrease in the area compressibility modulus KA We propose that the insertion of the ENTH helix-0 into the membrane is largely responsible for the observed decrease in KA, which is supported by the observation that the mutant ENTH L6E shows a reduced increase in adhesion area. These results demonstrate that even in the absence of tubule formation, the area compressibility modulus and, as such, the bending rigidity of the membrane is considerably reduced upon ENTH binding. This renders membrane bending and tubule formation energetically less costly.

Structural determinants of protein partitioning into ordered membrane domains and lipid rafts

Increasing evidence supports the existence of lateral nanoscopic lipid domains in plasma membranes, known as lipid rafts. These domains preferentially recruit membrane proteins and lipids to facilitate their interactions and thereby regulate transmembrane signaling and cellular homeostasis. The functionality of raft domains is intrinsically dependent on their selectivity for specific membrane components; however, while the physicochemical determinants of raft association for lipids are known, very few systematic studies have focused on the structural aspects that guide raft partitioning of proteins. In this review, we describe biophysical and thermodynamic aspects of raft-mimetic liquid ordered phases, focusing on those most relevant for protein partitioning. Further, we detail the variety of experimental models used to study protein-raft interactions. Finally, we review the existing literature on mechanisms for raft targeting, including lipid post-translational modifications, lipid binding, and transmembrane domain features. We conclude that while protein palmitoylation is a clear raft-targeting signal, few other general structural determinants for raft partitioning have been revealed, suggesting that many discoveries lie ahead in this burgeoning field.

Incorporation of ubiquinone in supported lipid bilayers on ITO

Ubiquinone (UQ) is one of the main electron and proton shuttle molecules in biological systems, and dipalmitoylphosphatidylcholine (DPPC) is one of the most used model lipids. Supported planar bilayers (SPBs) are extensively accepted as biological model membranes. In this study, SPBs have been deposited on ITO, which is a semiconductor with good electrical and optical features. Specifically, topographic atomic force microscopy (AFM) images and force curves have been performed on SPBs with several DPPC:UQ ratios to study the location and the interaction of UQ in the SPB. Additionally, cyclic voltammetry has been used to understand the electrochemical behavior of DPPC:UQ SPBs. Obtained results show that, in our case, UQ is placed in two main different positions in SPBs. First, between the DPPC hydrophobic chains, fact that originates a decrease in the breakthrough force of the bilayer, and the second between the two leaflets that form the SPBs. This second position occurs when increasing the UQ content, fact that eventually forms UQ aggregates at high concentrations. The formation of aggregates produces an expansion of the SPB average height and a bimodal distribution of the breakthrough force. The voltammetric response of UQ depends on its position on the bilayer.

Substrate Effects on the Formation Process, Structure and Physicochemical Properties of Supported Lipid Bilayers

Supported lipid bilayers are artificial lipid bilayer membranes existing at the interface between solid substrates and aqueous solution. Surface structures and properties of the solid substrates affect the formation process, fluidity, two-dimensional structure and chemical activity of supported lipid bilayers, through the 1–2 nm thick water layer between the substrate and bilayer membrane. Even on SiO₂/Si and mica surfaces, which are flat and biologically inert, and most widely used as the substrates for the supported lipid bilayers, cause differences in the structure and properties of the supported membranes. In this review, I summarize several examples of the effects of substrate structures and properties on an atomic and nanometer scales on the solid-supported lipid bilayers, including our recent reports.

Atomic force microscopy: a versatile tool to probe the physical and chemical properties of supported membranes at the nanoscale

Atomic force microscopy (AFM) was developed in the 1980s following the invention of its precursor, scanning tunneling microscopy (STM), earlier in the decade. Several modes of operation have evolved, demonstrating the extreme versatility of this method for measuring the physicochemical properties of samples at the nanoscopic scale. AFM has proved an invaluable technique for visualizing the topographic characteristics of phospholipid monolayers and bilayers, such as roughness, height or laterally segregated domains. Implemented modes such as phase imaging have also provided criteria for discriminating the viscoelastic properties of different supported lipid bilayer (SLB) regions. In this review, we focus on the AFM force spectroscopy (FS) mode, which enables determination of the nanomechanical properties of membrane models. The interpretation of force curves is presented, together with newly emerging techniques that provide complementary information on physicochemical properties that may contribute to our understanding of the structure and function of biomembranes. Since AFM is an imaging technique, some basic indications on how real-time AFM imaging is evolving are also presented at the end of this paper.

Challenges in the Development of Functional Assays of Membrane Proteins

Lipid bilayers are natural barriers of biological cells and cellular compartments. Membrane proteins integrated in biological membranes enable vital cell functions such as signal transduction and the transport of ions or small molecules. In order to determine the activity of a protein of interest at defined conditions, the membrane protein has to be integrated into artificial lipid bilayers immobilized on a surface. For the fabrication of such biosensors expertise is required in material science, surface and analytical chemistry, molecular biology and biotechnology. Specifically, techniques are needed for structuring surfaces in the micro- and nanometer scale, chemical modification and analysis, lipid bilayer formation, protein expression, purification and solubilization, and most importantly, protein integration into engineered lipid bilayers. Electrochemical and optical methods are suitable to detect membrane activity-related signals. The importance of structural knowledge to understand membrane protein function is obvious. Presently only a few structures of membrane proteins are solved at atomic resolution. Functional assays together with known structures of individual membrane proteins will contribute to a better understanding of vital biological processes occurring at biological membranes. Such assays will be utilized in the discovery of drugs, since membrane proteins are major drug targets.

Tethered bilayer lipid micromembranes for single-channel recording: the role of adsorbed and partially fused lipid vesicles

A mercury-supported bilayer lipid micromembrane was prepared by anchoring a thiolipid monolayer to a mercury cap electrodeposited on a platinum microdisc about 20 μm in diameter; a lipid monolayer was then self-assembled on top of the thiolipid monolayer either by vesicle fusion or by spilling a few drops of a lipid solution in chloroform on the cap and allowing the solvent to evaporate. Single-channel recording following incorporation of the alamethicin channel-forming peptide exhibits quite different features, depending on the procedure followed to form the distal lipid monolayer. The "spilling" procedure, which avoids the formation of adsorbed or partially fused vesicles, yields very sharp single-channel currents lasting only one or two milliseconds. These are ascribed to ionic flux into the hydrophilic spacer moiety of the thiolipid. Conversely, the vesicle-fusion procedure yields much longer single-channel openings analogous to those obtained with conventional bilayer lipid membranes, albeit smaller. This difference in behavior is explained by ascribing the latter single-channel currents to ionic flux into vesicles adsorbed and/or partially fused onto the tethered lipid bilayer, via capacitive coupling.

Studies of bilayers and vesicle adsorption to solid substrates: development of a miniature streaming potential apparatus (SPA)

A new miniature streaming potential apparatus (SPA) was developed to determine the streaming potentials (Psi(str)) and zeta potentials (zeta) of substrates under different ionic conditions while simultaneously visualizing the state of the surfaces, such as the adsorption of surfactants or polymers, using fluorescence microscopy and/or fluorescence recovery after photobleaching (FRAP). Experimental results with different surfaces show that the new SPA provides streaming potential values (hence zeta potentials) that agree with results obtained using traditional electrokinetic analyzers. Using the new SPA, the formation of supported lipid bilayers (SLBs) on glass from fluorescently labeled, unilamellar (approximately 100 nm diameter), charge neutral dimyristoyl-sn-glycero-3-phosphocholine (DMPC) vesicles was studied in aqueous electrolyte solutions at different lipid concentrations. Simultaneous zeta potential measurements and fluorescence imaging for measuring diffusion coefficients by confocal microscopy enabled us to precisely monitor the changes in the surface charge as well as in the surface morphology during SLB formation from vesicles. For a fixed incubation time of 5 min, both results revealed that the adsorption of intact vesicles and/or discrete bilayer patches were observed below a threshold concentration, above which the formation of continuous SLBs occurred leading to an estimate for the zeta-potential and for the diffusion coefficient of -9.1 +/- 1.6 mV and (1.1 +/- 0.02) x 10(-12) m(2)/s, respectively.

Stable supported lipid bilayers on zirconium phosphonate surfaces

Supported lipid bilayers that can fully represent biological cell membranes are attractive biomimetic models for biophysical and biomedical applications. In this study, we develop a new approach to engineering stable supported lipid membranes and demonstrate their utility for the study of protein-membrane interactions. This system uses a zirconium phosphonate monolayer to modify a substrate and generate a reactive surface that tethers the lipid membrane via a highly covalent bond between surface zirconium ions and divalent phosphate groups in the lipid assembly, for example, from phosphatidic acid. An advantage of the approach is that the zirconium phosphonate modifier can be applied to nearly any surface, allowing the same methods to be used on glass, gold, silicon, or plastic supports. The lipid bilayers are formed by vesicle fusion, either directly on the zirconated surface to form symmetric bilayers or following deposition of a Langmuir-Blodgett lipid layer to generate asymmetric bilayers. The membrane formation was studied by surface plasmon resonance enhanced ellipsometry (SPREE) as the phosphatidic acid composition was varied. We found that 10% of phosphatidic acid generates supported lipid bilayers stable to dehydration. The two-dimensional fluidity of these systems was characterized by fluorescence recovery after photobleaching (FRAP) measurements. Uniform, mobile supported lipid bilayers with lipid diffusion coefficients of approximately 4 mum(2)/s were obtained. SPREE was also used to measure kinetic parameters of the binding of melittin, a bee venom peptide, to asymmetric lipid bilayers with different electrostatic properties. The results are comparable to those obtained by other research groups, confirming that the model membranes behave as expected. Overall, the results of this study prove that supported lipid bilayers on zirconium phosphonate inorganic surfaces make up an attractive biomimetic system that is highly stable, can be used with multiple substrates, and does not require any biomolecule synthetic modifications.

Simultaneous nanoplasmonic and quartz crystal microbalance sensing: analysis of biomolecular conformational changes and quantification of the bound molecular mass

This paper presents a study of supported lipid bilayer (SLB) formation and subsequent protein binding using a sensor that combines localized surface plasmon resonance (LSPR) and quartz crystal microbalance with dissipation (QCM-D) monitoring. The LSPR activity arises from silicon oxide (SiO x ) coated nanometric apertures in a thin gold film, which also serves as the active electrode of a QCM-D crystal. Both transducer principles provide signatures for the formation of a SLB upon adsorption and subsequent rupture of adsorbed lipid vesicles. However, the two techniques are sensitive over different regions of the sample: LSPR primarily inside and on the rim of the holes and QCM-D primarily on the planar areas between the holes. Although the dimension of the lipid vesicles is on the same order as the dimension of the nanoholes, it is concluded from the response of the combined system that vesicle rupture in the nanoholes and on the planar region between the holes is synchronized. Furthermore, by determining the thickness of the SLB from the QCM-D response, the characteristic decay length of the LSPR field intensity could be determined. This made it possible not only to determine the mass and refractive index of the homogeneous SLB but also to postulate a generic means to quantify the LSPR response in terms of mass-uptake also for nonhomogeneous films. This is exemplified by measuring the adsorbed lipid mass during vesicle adsorption, yielding the critical lipid vesicle coverage at which spontaneous rupture into a planar bilayer occurs. The generic applicability and versatility of the method is demonstrated from specific protein binding to a functionalized SLB. From the absolute refractive index of the protein, provided from the LSPR data alone, it was possible to determine both the effective thickness of the protein film and the molecular mass (or number) of bound protein.

Nanoporous Silicified Phospholipids and Application to Controlled Glycolic Acid Release

This work demonstrates the synthesis and characterization of novel nanoporous silicified phospholipid bilayers assembled inorganic powders. The materials are obtained by silicification process with silica precursor at the hydrophilic region of phospholipid bilayers. This process involves the co-assembly of a chemically active phospholipids bilayer within the ordered porosity of a silica matrix and holds promise as a novel application for controlled drug release or drug containers with a high level of specificity and throughput. The controlled release application of the synthesized materials was achieved to glycolic acid, and obtained a zero-order release pattern due to the nanoporosity.

Formation of tethered bilayer lipid membranes on gold surfaces: QCM-Z and AFM study

Recently, tethered bilayer lipid membranes (tBLMs) have shown high potential as biomimetic systems due to their high stability and electrical properties, and have been used in applications ranging from membrane protein incorporation to biosensors. However, the kinetics of their formation remains largely uninvestigated. By using quartz crystal microbalance with impedance analysis (QCM-Z), we were able to monitor both the kinetics and viscoelastic properties of tether adsorption and vesicle fusion. Formation of the tether monolayer was shown to follow pseudo-first-order Langmuir kinetics with association and dissociation rate constants of 21.7 M-1 s(-1) and 7.43 x 10-6 s(-1), respectively. Moreover, the QCM-Z results indicate a rigid layer at the height of deposition, which then undergoes swelling as indicated by AFM. The deposition of vesicles to the tether layer also followed pseudo-first-order Langmuir kinetics with observed rate constants of 5.58 x 10(-2) and 2.41 x 10-2 s(-1) in water and buffer, respectively. Differential analysis of the QCM-Z data indicated deposition to be the fast kinetic step, with the rate-limiting steps being water release and fusion. Atomic force microscopy pictures taken complement the QCM-Z data, showing the major stages of tether adsorption and vesicle fusion, while providing a road map to successful tBLM formation.

Structure and stability of DPPE planar bilayers

Biomembrane mimics in the form of supported planar bilayers allow the application of a wide range of surface and interface analytical techniques. The structure and phase-behavior of single and double bilayers of 1,2-dipalmitoylphosphoethanolamine (DPPE) were investigated by specular neutron reflectivity for their viability as biomembrane mimics. Whilst single bilayer samples were found to exhibit stable gel and fluid structures, double bilayers were found to be intrinsically unstable in the fluid phase as a planar structure. A Bragg peak was observed in the reflectivity data at just above the gel-to-fluid transition temperature, indicating the partial rearrangement of the upper bilayer into a repeat stacked structure. The lower bilayer was structurally stable. The structure and phase-behaviour of a double bilayer containing a ratio of 9 : 1 DPPE/cholesterol was also investigated to assess the stabilising effect of cholesterol on the upper bilayer. The presence of cholesterol completely destabilised the upper bilayer, causing it to detach 7 °C below the gel-to-fluid transition temperature of DPPE. It is possible that the cholesterol increases the overall conical shape of DPPE molecule by residing in the chain region of the lipid.

Characterization of physical properties of supported phospholipid membranes using imaging ellipsometry at optical wavelengths

Subnanometer-scale vertical z-resolution coupled with large lateral area imaging, label-free, noncontact, and in situ advantages make the technique of optical imaging ellipsometry (IE) highly suitable for quantitative characterization of lipid bilayers supported on oxide substrates and submerged in aqueous phases. This article demonstrates the versatility of IE in quantitative characterization of structural and functional properties of supported phospholipid membranes using previously well-characterized examples. These include 1), a single-step determination of bilayer thickness to 0.2 nm accuracy and large-area lateral uniformity using photochemically patterned single 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayers; 2), hydration-induced spreading kinetics of single-fluid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayers to illustrate the in situ capability and image acquisition speed; 3), a large-area morphological characterization of phase-separating binary mixtures of 1,2-dilauroyl-sn-glycero-3-phosphocholine and galactosylceramide; and 4), binding of cholera-toxin B subunits to GM1-incorporating bilayers. Additional insights derived from these ellipsometric measurements are also discussed for each of these applications. Agreement with previous studies confirms that IE provides a simple and convenient tool for a routine, quantitative characterization of these membrane properties. Our results also suggest that IE complements more widely used fluorescence and scanning probe microscopies by combining large-area measurements with high vertical resolution without the use of labeled lipids.

Solid supported lipid bilayers: From biophysical studies to sensor design

The lipid bilayer is one of the most eloquent and important self-assembled structures in nature. It not only provides a protective container for cells and sub-cellular compartments, but also hosts much of the machinery for cellular communication and transport across the cell membrane. Solid supported lipid bilayers provide an excellent model system for studying the surface chemistry of the cell. Moreover, they are accessible to a wide variety of surface-specific analytical techniques. This makes it possible to investigate processes such as cell signaling, ligand-receptor interactions, enzymatic reactions occurring at the cell surface, as well as pathogen attack. In this review, the following membrane systems are discussed: black lipid membranes, solid supported lipid bilayers, hybrid lipid bilayers, and polymer cushioned lipid bilayers. Examples of how supported lipid membrane technology is interfaced with array based systems by photolithographic patterning, spatial addressing, microcontact printing, and microfluidic patterning are explored. Also, the use of supported lipid bilayers in microfluidic devices for the development of lab-on-a-chip based platforms is examined. Finally, the utility of lipid bilayers in nanotechnology and future directions in this area are discussed.

Imaging and manipulation of adsorbed lipid vesicles by an AFM tip: Experiment and Monte Carlo simulations

Single lipid vesicles adsorbed on SiO(2) were manipulated using an atomic force microscope (AFM) operated in contact mode. For large force setpoints, single vesicles were either pushed sideways or ruptured by the tip, depending on the tip type (sharp or blunt) used, while for small force setpoints the vesicles were imaged by the tip. To extend the interpretation of and to guide the experiment, we have developed a generic model of the vesicle-tip-substrate system and performed Monte Carlo simulations, addressing the influence of force setpoint and tip speed and shape on the type of imaging or manipulation observed. Specifically, we have explored AFM-image height and width variations versus force setpoint, typical AFM images for small and large force setpoints, tip-induced vesicle strain versus force setpoint, typical vesicle shapes during pushing for different tip speeds, and the details of vesicle rupture induced by the tip.

Structure and mobility of lipid membranes on a thermoplastic substrate

Supported lipid membranes constitute one of the most important model systems for cell membranes. The properties of lipid membranes supported by the hydrophobic solid polymer cyclic olefin copolymer (COC) were investigated. Lipid layers consisting of varying amounts of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP, cationic) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC, neutral) prepared by vesicle fusion and solvent exchange were compared. All lipid mixtures coated the COC surface homogeneously forming a fluid membrane as verified by fluorescence microscopy and fluorescence recovery after photobleaching (FRAP). The exact structure of the supported membranes was determined by synchrotron reflectivity experiments using a microfluidic chamber. The X-ray data are in agreement with a compressed (head-to-head distance = 29 angstroms) and less densely packed bilayer.

Effect of average phospholipid curvature on supported bilayer formation on glass by vesicle fusion

The adsorption of large unilamellar vesicles composed of various combinations of phosphatidylcholine, phosphatidylethanolamine (PE), monomethyl PE, and dimethyl PE (PE-Me2) onto a glass surface was studied using fluorescence microscopy. The average lipid geometry within the vesicles, described mathematically by the average intrinsic curvature, C(0,ave), was methodically altered by changing the lipid ratios to determine the effect of intrinsic curvature on the ability of vesicles to rupture and form a supported lipid bilayer. We show that the ability of vesicles to create fluid planar bilayers is dependent on C(0,ave) and independent of the identity of the component lipids. When the C(0,ave) was approximately -0.1 nm(-1), the vesicles readily formed supported lipid bilayers with almost full mobility. In contrast, when the C(0,ave) ranged from approximately -0.2 to approximately -0.3 nm(-1), the adsorbed vesicles remained intact upon the surface. The results indicate that the average shape of lipid molecules within a vesicle (C(0,ave)) is essential for determining kinetically viable reactions that are responsible for global geometric changes.

Probing the interaction between vesicular stomatitis virus and phosphatidylserine

The entry of enveloped animal viruses into their host cells always depends on membrane fusion triggered by conformational changes in viral envelope glycoproteins. Vesicular stomatitis virus (VSV) infection is mediated by virus spike glycoprotein G, which induces membrane fusion between the viral envelope and the endosomal membrane at the acidic environment of this compartment. In this work, we evaluated VSV interactions with membranes of different phospholipid compositions, at neutral and acidic pH, using atomic force microscopy (AFM) operating in the force spectroscopy mode, isothermal calorimetry (ITC) and molecular dynamics simulation. We found that the binding forces differed dramatically depending on the membrane phospholipid composition, revealing a high specificity of G protein binding to membranes containing phosphatidylserine (PS). In a previous work, we showed that the sequence corresponding amino acid 164 of VSV G protein was as efficient as the virus in catalyzing membrane fusion at pH 6.0. Here, we used this sequence to explore VSV-PS interaction using ITC. We found that peptide binding to membranes was exothermic, suggesting the participation of electrostatic interactions. Peptide-membrane interaction at pH 7.5 was shown to be specific to PS and dependent on the presence of His residues in the fusion peptide. The application of the simplified continuum Gouy-Chapman theory to our system predicted a pH of 5.0 at membrane surface, suggesting that the His residues should be protonated when located close to the membrane. Molecular dynamics simulations suggested that the peptide interacts with the lipid bilayer through its N-terminal residues, especially Val(145) and His(148).

Plasmon resonance methods in GPCR signaling and other membrane events

The existence of surface guided electromagnetic waves has been theoretically predicted from Maxwell's equations and investigated during the first decades of the 20th century. However, it is only since the late 1960's that they have attracted the interest of surface physicists and earned the moniker of "surface plasmon". With the advent of commercially available instruments and well established theories, the technique has been used to study a wide variety of biochemical and biotechnological phenomena. Spectral response of the resonance condition serves as a sensitive indicator of the optical properties of thin films immobilized within a wavelength of the surface. This enhanced surface sensitivity has provided a boon to the surface sciences, and fosters collaboration between surface chemistry, physics and the ongoing biological and biotechnological revolution. Since then, techniques based on surface plasmons such as Surface Plasmon Resonance (SPR), SPR Imaging, Plasmon Waveguide Resonance (PWR) and others, have been increasingly used to determine the affinity and kinetics of a wide variety of real time molecular interactions such as protein-protein, lipid-protein and ligand-protein, without the need for a molecular tag or label. The physical-chemical methodologies used to immobilize membranes at the surface of these optical devices are reviewed, pointing out advantages and limitations of each method. The paper serves to summarize both historical and more recent developments of these technologies for investigating structure-function aspects of these molecular interactions, and regulation of specific events in signal transduction by G-protein coupled receptors (GPCRs).

Using the atomic force microscope to study the interaction between two solid supported lipid bilayers and the influence of synapsin I

To measure the interaction between two lipid bilayers with an atomic force microscope one solid supported bilayer was formed on a planar surface by spontaneous vesicle fusion. To spontaneously adsorb lipid bilayers also on the atomic force microscope tip, the tips were first coated with gold and a monolayer of mercapto undecanol. Calculations indicate that long-chain hydroxyl terminated alkyl thiols tend to enhance spontaneous vesicle fusion because of an increased van der Waals attraction as compared to short-chain thiols. Interactions measured between dioleoylphosphatidylcholine, dioleoylphosphatidylserine, and dioleoyloxypropyl trimethylammonium chloride showed the electrostatic double-layer force plus a shorter-range repulsion which decayed exponentially with a decay length of 0.7 nm for dioleoylphosphatidylcholine, 1.2 nm for dioleoylphosphatidylserine, and 0.8 nm for dioleoyloxypropyl trimethylammonium chloride. The salt concentration drastically changed the interaction between dioleoyloxypropyl trimethylammonium chloride bilayers. As an example for the influence of proteins on bilayer-bilayer interaction, the influence of the synaptic vesicle-associated, phospholipid binding protein synapsin I was studied. Synapsin I increased membrane stability so that the bilayers could not be penetrated with the tip.