S-layer-coated liposomes as a versatile system for entrapping and binding target molecules

Application of two glycosylated Lactobacillus surface layer proteins in coating cationic liposomes

The ability of isolated surface layer proteins (SLPs) to reassemble on suitable surfaces enables the application of SLPs in various fields of nanotechnology. In this work, SLPs from Lactobacillus buchneri BNCC 187,964 and L. kefir BNCC 190,565 were extracted and verified as glycosylated proteins. They were applied to coat on the surface of cationic liposomes. The absorption of the two SLPs on liposomes induced the zeta potential reduction and particle size increase. The two kinds of SLP-coated liposomes demonstrated better thermal, light and pH stability than the control liposomes. And the L. kefir SLP showed better protective effects than the L. buchneri SLP. Moreover, both of the SLPs could endow liposomes with the function of binding ferritin as observed by transmission electron microscope. Fourier transform infrared spectroscopy illustrated that the interaction between the two SLPs and liposomes was similar. The recrystallization of the two SLPs on the liposomes might drive the lipid into a higher order state and hydrogen bonds were formed between the two SLPs and the liposomes. All the findings demonstrated that L. kefir SLP and L. buchneri SLP had great potential to be explored as effective coating agents to improve the stability and function of cationic liposomes.Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.Yes, all have been checked.

Phospholipid-Membrane-Based Nanovesicles Acting as Vaccines for Tumor Immunotherapy: Classification, Mechanisms and Applications

Membrane vesicles, a group of nano- or microsized vesicles, can be internalized or interact with the recipient cells, depending on their parental cells, size, structure and content. Membrane vesicles fuse with the target cell membrane, or they bind to the receptors on the cell surface, to transfer special effects. Based on versatile features, they can modulate the functions of immune cells and therefore influence immune responses. In the field of tumor therapeutic applications, phospholipid-membrane-based nanovesicles attract increased interest. Academic institutions and industrial companies are putting in effort to design, modify and apply membrane vesicles as potential tumor vaccines contributing to tumor immunotherapy. This review focuses on the currently most-used types of membrane vesicles (including liposomes, bacterial membrane vesicles, tumor- and dendritic-cell-derived extracellular vesicles) acting as tumor vaccines, and describes the classification, mechanism and application of these nanovesicles.

Bio-Nanocarriers for Lung Cancer Management: Befriending the Barriers

Lung cancer is a complex thoracic malignancy developing consequential to aberrations in a myriad of molecular and biomolecular signaling pathways. It is one of the most lethal forms of cancers accounting to almost 1.8 million new annual incidences, bearing overall mortality to incidence ratio of 0.87. The dismal prognostic scenario at advanced stages of the disease and metastatic/resistant tumor cell populations stresses the requisite of advanced translational interdisciplinary interventions such as bionanotechnology. This review article deliberates insights and apprehensions on the recent prologue of nanobioengineering and bionanotechnology as an approach for the clinical management of lung cancer. The role of nanobioengineered (bio-nano) tools like bio-nanocarriers and nanobiodevices in secondary prophylaxis, diagnosis, therapeutics, and theranostics for lung cancer management has been discussed. Bioengineered, bioinspired, and biomimetic bio-nanotools of considerate translational value have been reviewed. Perspectives on existent oncostrategies, their critical comparison with bio-nanocarriers, and issues hampering their clinical bench side to bed transformation have also been summarized.

Coating function and stabilizing effects of surface layer protein from Lactobacillus acidophilus ATCC 4356 on liposomes

Surface layer proteins (SLPs) are crystalline arrays in the outermost layer of cell envelope in many archaea and bacteria. SLPs subunits have the ability to reassemble on the surface of lipid layers. In this work, the SLP from Lactobacillus acidophilus ATCC 4356 was extracted and reassembled on the surface of positively charged liposomes composed of dipalmitoyl phosphatidylcholine, cholesterol and octadecylamine. Zeta potentials and particle size were determined to describe the adsorption process of SLP on liposomes. The liposomes completely coated with SLP were observed by transmission electron microscope. To investigate the stabilizing effects of SLP on liposomes, carboxyfluorescein (CF) was encapsulated and its leakage was determined as an evaluation index. The results showed that the L. acidophilus ATCC 4356 SLP significantly (P < 0.05) increased the stability of the liposomes in the course of thermal challenge. Furthermore, SLP was able to reduce the aggregation of liposomes in serum. Storage stability of liposomes was performed at 25 °C, 4 °C and -20 °C for 90 days. And the SLP-coated liposomes released less CF than the control liposomes during storage at the three evaluated temperatures. Our findings extended the application field of Lactobacillus SLPs and introduced a novel nanocarrier system with good chemical stability.

Preparation and characterization of endolysin-containing liposomes and evaluation of their antimicrobial activities against gram-negative bacteria

The overuse and misuse of antibiotics in treating bacterial infections cause the rapid emergence of drug-resistant bacteria, suggesting that the development of alternative strategies to control antibiotic-resistant bacteria is urgently needed. Endolysins are bacteriophage-encoded enzymes that can degrade peptidoglycan in bacterial cell walls, and they have great potential as alternative antimicrobial agents. However, exogenous application of recombinant endolysin is limited to Gram-positive bacteria because endolysins cannot penetrate the outer membrane of Gram-negative bacteria. Here, a liposome-mediated endolysin encapsulation system was developed, and its ability to penetrate the outer membrane of Gram-negative bacteria was tested. The phage-derived endolysin BSP16Lys was isolated, characterized, and used for encapsulation into a cationic liposome comprised of dipalmitoylphosphatidylcholine (DPPC), cholesterol, and hexadecylamine. The BSP16Lys-encapsulated liposome had a high zeta potential value (over 30 mV) with an average diameter of 303 nm. The encapsulation efficiency of BSP16Lys into the liposome was 35.27%. Salmonella Typhimuriumand Escherichia coli cells treated with BSP16Lys-encapsulated liposomes showed 2.2-log CFU/mL and 1.6-log CFU/mL reductions in the viable cell numbers, respectively, without treatment of a membrane permeabilizer. These results showed potential for liposome-mediated delivery of endolysin for exogenous application against Gram-negative bacteria.

Slp-coated liposomes for drug delivery and biomedical applications: potential and challenges

Slp forms a crystalline array of proteins on the outermost envelope of bacteria and archaea with a molecular weight of 40-200 kDa. Slp can self-assemble on the surface of liposomes in a proper environment via electrostatic interactions, which could be employed to functionalize liposomes by forming Slp-coated liposomes for various applications. Among the molecular characteristics, the stability, adhesion, and immobilization of biomacromolecules are regarded as the most meaningful. Compared to plain liposomes, Slp-coated liposomes show excellent physicochemical and biological stabilities. Recently, Slp-coated liposomes were shown to specifically adhere to the gastrointestinal tract, which was attributed to the "ligand-receptor interaction" effect. Furthermore, Slp as a "bridge" can immobilize functional biomacromol-ecules on the surface of liposomes via protein fusion technology or intermolecular forces, endowing liposomes with beneficial functions. In view of these favorable features, Slp-coated liposomes are highly likely to be an ideal platform for drug delivery and biomedical uses. This review aims to provide a general framework for the structure and characteristics of Slp and the interactions between Slp and liposomes, to highlight the unique properties and drug delivery as well as the biomedical applications of the Slp-coated liposomes, and to discuss the ongoing challenges and perspectives.

Single-Vesicle Assays Using Liposomes and Cell-Derived Vesicles: From Modeling Complex Membrane Processes to Synthetic Biology and Biomedical Applications

The plasma membrane is of central importance for defining the closed volume of cells in contradistinction to the extracellular environment. The plasma membrane not only serves as a boundary, but it also mediates the exchange of physical and chemical information between the cell and its environment in order to maintain intra- and intercellular functions. Artificial lipid- and cell-derived membrane vesicles have been used as closed-volume containers, representing the simplest cell model systems to study transmembrane processes and intracellular biochemistry. Classical examples are studies of membrane translocation processes in plasma membrane vesicles and proteoliposomes mediated by transport proteins and ion channels. Liposomes and native membrane vesicles are widely used as model membranes for investigating the binding and bilayer insertion of proteins, the structure and function of membrane proteins, the intramembrane composition and distribution of lipids and proteins, and the intermembrane interactions during exo- and endocytosis. In addition, natural cell-released microvesicles have gained importance for early detection of diseases and for their use as nanoreactors and minimal protocells. Yet, in most studies, ensembles of vesicles have been employed. More recently, new micro- and nanotechnological tools as well as novel developments in both optical and electron microscopy have allowed the isolation and investigation of individual (sub)micrometer-sized vesicles. Such single-vesicle experiments have revealed large heterogeneities in the structure and function of membrane components of single vesicles, which were hidden in ensemble studies. These results have opened enormous possibilities for bioanalysis and biotechnological applications involving unprecedented miniaturization at the nanometer and attoliter range. This review will cover important developments toward single-vesicle analysis and the central discoveries made in this exciting field of research.

Bacterial components as naturally inspired nano-carriers for drug/gene delivery and immunization: Set the bugs to work?

Drug delivery is a rapidly growing area of research motivated by the nanotechnology revolution, the ideal of personalized medicine, and the desire to reduce the side effects of toxic anti-cancer drugs. Amongst a bewildering array of different nanostructures and nanocarriers, those examples that are fundamentally bio-inspired and derived from natural sources are particularly preferred. Delivery of vaccines is also an active area of research in this field. Bacterial cells and their components that have been used for drug delivery, include the crystalline cell-surface layer known as "S-layer", bacterial ghosts, bacterial outer membrane vesicles, and bacterial products or derivatives (e.g. spores, polymers, and magnetic nanoparticles). Considering the origin of these components from potentially pathogenic microorganisms, it is not surprising that they have been applied for vaccines and immunization. The present review critically summarizes their applications focusing on their advantages for delivery of drugs, genes, and vaccines.

Engineering the entropy-driven free-energy landscape of a dynamic nanoporous protein assembly

De novo design and construction of stimuli-responsive protein assemblies that predictably switch between discrete conformational states remains an essential but highly challenging goal in biomolecular design. We previously reported synthetic, two-dimensional protein lattices self-assembled via disulfide bonding interactions, which endows them with a unique capacity to undergo coherent conformational changes without losing crystalline order. Here, we carried out all-atom molecular dynamics simulations to map the free-energy landscape of these lattices, validated this landscape through extensive structural characterization by electron microscopy and established that it is predominantly governed by solvent reorganization entropy. Subsequent redesign of the protein surface with conditionally repulsive electrostatic interactions enabled us to predictably perturb the free-energy landscape and obtain a new protein lattice whose conformational dynamics can be chemically and mechanically toggled between three different states with varying porosities and molecular densities.

S-Layer Protein-Based Biosensors

The present paper highlights the application of bacterial surface (S-) layer proteins as versatile components for the fabrication of biosensors. One technologically relevant feature of S-layer proteins is their ability to self-assemble on many surfaces and interfaces to form a crystalline two-dimensional (2D) protein lattice. The S-layer lattice on the surface of a biosensor becomes part of the interface architecture linking the bioreceptor to the transducer interface, which may cause signal amplification. The S-layer lattice as ultrathin, highly porous structure with functional groups in a well-defined special distribution and orientation and an overall anti-fouling characteristics can significantly raise the limit in terms of variety and the ease of bioreceptor immobilization, compactness of bioreceptor molecule arrangement, sensitivity, specificity, and detection limit for many types of biosensors. The present paper discusses and summarizes examples for the successful implementation of S-layer lattices on biosensor surfaces in order to give a comprehensive overview on the application potential of these bioinspired S-layer protein-based biosensors.

Emulsomes meet S-layer proteins: an emerging targeted drug delivery system

Here, the use of emulsomes as a drug delivery system is reviewed and compared with other similar lipidic nanoformulations. In particular, we look at surface modification of emulsomes using S-layer proteins, which are self-assembling proteins that cover the surface of many prokaryotic organisms. It has been shown that covering emulsomes with a crystalline S-layer lattice can protect cells from oxidative stress and membrane damage. In the future, the capability to recrystallize S-layer fusion proteins on lipidic nanoformulations may allow the presentation of binding functions or homing protein domains to achieve highly specific targeted delivery of drug-loaded emulsomes. Besides the discussion on several designs and advantages of composite emulsomes, the success of emulsomes for the delivery of drugs to fight against viral and fungal infections, dermal therapy, cancer, and autoimmunity is summarized. Further research might lead to smart, biocompatible emulsomes, which are able to protect and reduce the side effects caused by the drug, but at the same time are equipped with specific targeting molecules to find the desired site of action.

S-layers: principles and applications

Monomolecular arrays of protein or glycoprotein subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope components. S-layers are generally the most abundantly expressed proteins, have been observed in species of nearly every taxonomical group of walled bacteria, and represent an almost universal feature of archaeal envelopes. The isoporous lattices completely covering the cell surface provide organisms with various selection advantages including functioning as protective coats, molecular sieves and ion traps, as structures involved in surface recognition and cell adhesion, and as antifouling layers. S-layers are also identified to contribute to virulence when present as a structural component of pathogens. In Archaea, most of which possess S-layers as exclusive wall component, they are involved in determining cell shape and cell division. Studies on structure, chemistry, genetics, assembly, function, and evolutionary relationship of S-layers revealed considerable application potential in (nano)biotechnology, biomimetics, biomedicine, and synthetic biology.

Reassembly of S-layer proteins

Crystalline bacterial cell surface layers (S-layers) represent the outermost cell envelope component in a broad range of bacteria and archaea. They are monomolecular arrays composed of a single protein or glycoprotein species and represent the simplest biological membranes developed during evolution. They are highly porous protein mesh works with unit cell sizes in the range of 3 to 30 nm, and pore sizes of 2 to 8 nm. S-layers are usually 5 to 20 nm thick (in archaea, up to 70 nm). S-layer proteins are one of the most abundant biopolymers on earth. One of their key features, and the focus of this review, is the intrinsic capability of isolated native and recombinant S-layer proteins to form self-assembled mono- or double layers in suspension, at solid supports, the air-water interface, planar lipid films, liposomes, nanocapsules, and nanoparticles. The reassembly is entropy-driven and a fascinating example of matrix assembly following a multistage, non-classical pathway in which the process of S-layer protein folding is directly linked with assembly into extended clusters. Moreover, basic research on the structure, synthesis, genetics, assembly, and function of S-layer proteins laid the foundation for their application in novel approaches in biotechnology, biomimetics, synthetic biology, and nanotechnology.

Biomimetic interfaces based on S-layer proteins, lipid membranes and functional biomolecules

Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state-of-the-art survey of how S-layer proteins, lipids and polymers may be used as basic building blocks for the assembly of S-layer-supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and, thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas in the (lab-on-a-) biochip technology are combining composite S-layer membrane systems involving specific membrane functions with the silicon world. Thus, it might become possible to create artificial noses or tongues, where many receptor proteins have to be exposed and read out simultaneously. Moreover, S-layer-coated liposomes and emulsomes copying virus envelopes constitute promising nanoformulations for the production of novel targeting, delivery, encapsulation and imaging systems.

Analysis of the interaction between Bacillus coagulans and Bacillus thuringiensis S-layers and calcium ions by XRD, light microscopy, and FTIR

S-layer is a self-assemble regularly crystalline surface that covers major cell wall component of many bacteria and archaea and exhibits a high metal-binding capacity. We have studied the effect of the calcium ions and type of solid support (glass or mica) on the structure of the S-layers from Bacillus coagulans HN-68 and Bacillus thuringiensis MH14 upon simple methods based on light microscopy and AFM. Furthermore, the Fourier transform infrared spectroscopy (FTIR) study is indicated that the calcium-S-layer interaction occurred mainly through the carboxylate groups of the side chains of aspartic acid (Asp) and glutamic acid (Glu) and nitrogen atoms of Lys, Asn, and histidine (His) amino acids and N-H groups of the peptide backbone. Studied FTIR revealed that inner faces of S-layer are mainly negative, and outer faces of S-layer are mainly positive. Probably, calcium ions with positive charges bound to the carboxyl groups of Glu and Asp. Accordingly, calcium ions are anchored in the space between the inner faces of S-layer with negative charge and the surface of mica with negative charge. This leads to regular arrangement of the S-layer subunits.

S-layer coated emulsomes as potential nanocarriers

The present study introduces a novel nanocarrier system comprising lipidic emulsomes and S-layer (fusion) proteins as functionalizing tools coating the surface. Emulsomes composed of a solid tripalmitin core and a phospholipid shell are created reproducibly with an average diameter of approximately 300 nm using temperature-controlled extrusion steps. Both wildtype (wt) and recombinant (r) S-layer protein SbsB of Geobacillus stearothermophilus PV72/p2 are capable of forming coherent crystalline envelope structures with oblique (p1) lattice symmetry, as evidenced by transmission electron microscopy. Upon coating with wtSbsB, positive charge of emulsomes shifts to a highly negative zeta potential, whereas those coated with rSbsB become charge neutral. This observation is attributed to the presence of a negatively charged glycan, the secondary cell wall polymer (SCWP), which is associated only with wtSbsB. The present study shows for the first time the ability of recombinant and wildtype S-layer proteins to cover the entire surface of emulsomes with its characteristic crystalline lattice. Furthermore, in vitro cell culture studies reveal that S-layer coated emulsomes can be uptaken by human liver carcinoma cells (HepG2) without showing any significant cytotoxicity over a wide range of concentrations. The utilization of S-layer fusion proteins equipped in a nanopatterned fashion by identical or diverse functions may lead to further development of emulsomes in nanomedicine, especially for drug delivery and targeting.

Construction of silica-enhanced S-layer protein cages

The work presented here shows for the first time that it is possible to silicify S-layer coated liposomes and to obtain stable functionalized hollow nano-containers. For this purpose, the S-layer protein of Geobacillus stearothermophilus PV72/p2 was recombinantly expressed and used for coating positively charged liposomes composed of dipalmitoylphosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4. Subsequently, plain (uncoated) liposomes and S-layer coated liposomes were silicified. Determination of the charge of the constructs during silicification allowed the deposition process to be followed. After the particles had been silicified, lipids were dissolved by treatment with Triton X-100 with the release of previously entrapped fluorescent dyes being determined by fluorimetry. Both, ζ-potential and release experiments showed differences between silicified plain liposomes and silicified S-layer coated liposomes. The results of the individual preparation steps were examined by embedding the respective assemblies in resin, ultrathin sectioning and inspection by bright-field transmission electron microscopy (TEM). Energy filtered TEM confirmed the successful construction of S-layer based silica cages. It is anticipated that this approach will provide a key to enabling technology for the fabrication of nanoporous protein cages for applications ranging from nano medicine to materials science.

S-layer protein self-assembly

Crystalline S(urface)-layers are the most commonly observed cell surface structures in prokaryotic organisms (bacteria and archaea). S-layers are highly porous protein meshworks with unit cell sizes in the range of 3 to 30 nm, and thicknesses of ~10 nm. One of the key features of S-layer proteins is their intrinsic capability to form self-assembled mono- or double layers in solution, and at interfaces. Basic research on S-layer proteins laid foundation to make use of the unique self-assembly properties of native and, in particular, genetically functionalized S-layer protein lattices, in a broad range of applications in the life and non-life sciences. This contribution briefly summarizes the knowledge about structure, genetics, chemistry, morphogenesis, and function of S-layer proteins and pays particular attention to the self-assembly in solution, and at differently functionalized solid supports.

Polyelectrolyte based molecular carriers: The role of self-assembled proteins in permeability properties

Polyelectrolyte capsules are seen as promising nanotechnology based drug delivery systems. In previous works, we have demonstrated the possibility to fabricate bio-activated surface layer containing capsules with improved features in terms of biocompatibility. In this study, we have characterized the permeability properties of such capsules towards low and high molecular weight molecules, including proteins. The results indicated that the presence of the surface layer strongly affects the permeability properties of the capsules in terms of loading capacity which was found to be higher compared to that of plain capsules. These properties make such systems interesting candidates as drug delivery platforms.

Nanobiotechnology with S-layer proteins as building blocks

One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

Self-assembly and recrystallization of bacterial S-layer proteins of Bacillus sphaericus and Bacillus thuringiensis on silicone, mica and quartz crystal supports

The Oriented architecture of macromolecules plays a critical role in many aspects of Nanobiotechnology such as in the development of biosensors. To this regard, S-layers which constitute the outermost cell envelope component of many prokaryotic organisms, represent unique self assembled systems with the capability to rearrange into monomolecular and oriented arrays. These properties can be exploited to promote their crystallization on surfaces (e.g. silicone) which is pivotal for the subsequent immobilization of macromolecules and development of new biosensors. In this work the crystallization of bacterial S-layers obtained from Bacillus thuringiensis and Bacillus sphaericus CCM2177 on silicone, mica and quartz crystal surfaces were investigated. The SDS page results of S-layers isolated from the above mentioned bacteria put in evidence that their molecular weight (MW) was around 120 KDa and, as reported in the literature, slightly higher for those extracted by Bacillus thuringiensis. In addition, results showed that S-layers isolated from Bacillus thuringiensis form large crystalline domains on mica after 5 min whereas those extracted from Bacillus sphaericus CCM 2177 form a compact monolayer on silicone after 2 h. Results in this work put in evidence the possibility to use these substrates for the fabrication of sensitive biosensors.

Composite S-layer lipid structures

Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state of the art survey how S-layer proteins, lipids, and polysaccharides may be used as basic building blocks for the assembly of S-layer supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas for application of composite S-layer membrane systems concern sensor systems involving specific membrane functions.

Novel biocatalysts based on S-layer self-assembly of Geobacillus stearothermophilus NRS 2004/3a: a nanobiotechnological approach

The crystalline cell-surface (S) layer sgsE of Geobacillus stearothermophilus NRS 2004/3a represents a natural protein self-assembly system with nanometer-scale periodicity that is evaluated as a combined carrier/patterning element for the conception of novel types of biocatalyst aiming at the controllable display of biocatalytic epitopes, storage stability, and reuse. The glucose-1-phosphate thymidylyltransferase RmlA is used as a model enzyme and chimeric proteins are constructed by translational fusion of rmlA to the C-terminus of truncated forms of sgsE (rSgsE (131-903), rSgsE(331-903)) and used for the construction of three principal types of biocatalysts: soluble (monomeric), self-assembled in aqueous solution, and recrystallized on negatively charged liposomes. Enzyme activity of the biocatalysts reaches up to 100 % compared to sole RmlA cloned from the same bacterium. The S-layer portion of the biocatalysts confers significantly improved shelf life to the fused enzyme without loss of activity over more than three months, and also enables biocatalyst recycling. These nanopatterned composites may open up new functional concepts for biocatalytic applications in nanobiotechnology.

S-layers as a tool kit for nanobiotechnological applications

Crystalline bacterial cell surface layers (S-layers) have been identified in a great number of different species of bacteria and represent an almost universal feature of archaea. Isolated native S-layer proteins and S-layer fusion proteins incorporating functional sequences self-assemble into monomolecular crystalline arrays in suspension, on a great variety of solid substrates and on various lipid structures including planar membranes and liposomes. S-layers have proven to be particularly suited as building blocks and patterning elements in a biomolecular construction kit involving all major classes of biological molecules (proteins, lipids, glycans, nucleic acids and combinations of them) enabling innovative approaches for the controlled 'bottom-up' assembly of functional supramolecular structures and devices. Here, we review the basic principles of S-layer proteins and the application potential of S-layers in nanobiotechnology and biomimetics including life and nonlife sciences.

Recrystallization of bacterial S-layers on flat polyelectrolyte surfaces and hollow polyelectrolyte capsules

Polyelectrolyte multilayer (PE) deposition and S-layer technology have been combined to make novel robust biomimetic surfaces and membranes. Isolated subunits of the bacterial cell surface layer from Bacillus sphaericus CCM2177 SbpA was self-assembled on PE multilayer supports, with the composition of the multilayer playing a crucial role in determining the structure of the resulting supported protein layers. Flat substrates were studied using atomic force microscopy and neutron reflectometry; protein on suitable PE combinations showed a crystalline structure with lattice constants equal to those found in vivo on bacterial surfaces. The mechanical stability of the S-layer is higher when recrystallized on PEs than directly on silicon supports. The recrystallization process was subsequently used to coat colloidal particles, permitting the determination of zeta potentials before and after coating. Hollow capsules could also be coated in the same way, as proven by various techniques. Our results suggest that electrostatic interactions via divalent cations are important for the assembly process. The results also demonstrate that the versatility of the PE multilayer membranes can be successfully combined with the well-defined surface chemistry and structure of 2D protein crystals.

Chemical and thermal denaturation of crystalline bacterial S-layer proteins: An atomic force microscopy study

Crystalline monomolecular cell surface layers, S-layers, are one of the most common outermost cell envelope components of the prokaryotic organisms (bacteria and archaeda) that protects them from competitive habitats. Since isolated S-protein subunits are able to re-assemble into crystalline arrays on lipid films and solid supports making biomimetic surfaces, S-layer technology is currently used in nanobiotechnology. An important aspect of the biomimetic surfaces built with S-layers is their stability under extreme solvent conditions or temperature. Chemical (pH, alcohol) and physical (thermal) denaturant conditions were employed to test the stability of S-layers. Recrystallized bacterial surface layers from Bacillus sphaericus (SbpA) on hydrophilic silicon wafers loses the crystalline structure at 80% ethanol/water mixtures, the change in structure being reversible after treating the surface with buffer solution. SbpA on silicon supports denatures at pH 3 and at 70 degrees C, and the process is irreversible. Cross-linking of SbpA enhances the stability for high ethanol and acidic conditions, but it does not improve thermal stability. Recrystallized SbpA on secondary cell wall polymer (SCWP), a natural environment for the protein layer, is more resistant to ethanol and pH exposure than recrystallized SbpA on hydrophilic silicon supports. Atomic force microscopy (AFM) was used to monitor the loss of stability and the changes in protein layer conformation.

A functional chimaeric S-layer-enhanced green fluorescent protein to follow the uptake of S-layer-coated liposomes into eukaryotic cells

The chimaeric gene encoding a C-terminally truncated form of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 and the EGFP (enhanced green fluorescent protein) was ligated into plasmid pET28a and cloned and expressed in Escherichia coli. Just 1 h after induction of expression an intense EGFP fluorescence was detected in the cytoplasm of the host cells. Expression at 28 degrees C instead of 37 degrees C resulted in clearly increased fluorescence intensity, indicating that the folding process of the EGFP moiety was temperature sensitive. To maintain the EGFP fluorescence, isolation of the fusion protein from the host cells had to be performed in the presence of reducing agents. SDS/PAGE analysis, immunoblotting and N-terminal sequencing of the isolated and purified fusion protein confirmed the presence of both the S-layer protein and the EGFP moiety. The fusion protein had maintained the ability to self-assemble in suspension and to recrystallize on peptidoglycan-containing sacculi or on positively charged liposomes, as well as to fluoresce. Comparison of fluorescence excitation and emission spectra of recombinant EGFP and rSbpA(31-1068)/EGFP revealed identical maxima at 488 and 507 nm respectively. The uptake of liposomes coated with a fluorescent monomolecular protein lattice of rSbpA(31-1068)/EGFP into HeLa cells was studied by confocal laser-scanning microscopy. The major part of the liposomes was internalized within 2 h of incubation and entered the HeLa cells by endocytosis.

Biophysical characterization of the entire bacterial surface layer protein SbsB and its two distinct functional domains

The crystalline bacterial cell surface layer (S-layer) protein SbsB of Geobacillus stearothermophilus PV72/p2 was dissected into an N-terminal part defined by the three consecutive S-layer homologous motifs and the remaining large C-terminal part. Both parts of the mature protein were produced as separate recombinant proteins (rSbsB(1-178) and rSbsB(177-889)) and compared with the full-length form rSbsB(1-889) (rSbsB). Evidence for functional and structural integrity of the two truncated forms was provided by optical spectroscopic methods and electron microscopy. In particular, binding of the secondary cell wall polymer revealed a high affinity dissociation constant of 3 nm and could be assigned solely to the soluble rSbsB(1-178), whereas rSbsB(177-889) self-assembled into the same lattice as the full-length protein. Furthermore, thermal as well as guanidinium hydrochloride induced equilibrium unfolding profiles monitored by intrinsic fluorescence, and circular dichroism spectroscopy allowed characterization of rSbsB(1-178) as an alpha-helical protein with a single cooperative unfolding transition yielding a DeltaG value of 26.5 kJ mol(-1). The C-terminal rSbsB(177-889) could be characterized as a beta-sheet protein with typical multidomain unfolding, which is partially less stable as stand-alone protein. In general, the truncated forms showed identical properties compared with the full-length rSbsB with respect to structure and function. Consequently, rSbsB is characterized by its two functionally and structurally separated parts, the specific secondary cell wall polymer binding rSbsB(1-178) and the larger rSbsB(177-889) responsible for formation of the crystalline array.

Molecular characterization of the S-layer gene, sbpA, of Bacillus sphaericus CCM 2177 and production of a functional S-layer fusion protein with the ability to recrystallize in a defined orientation while presenting the fused allergen

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5' end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA(31-1068)). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA(31-1068). Labeling of the square S-layer lattice formed by recrystallization of rSbpA(31-1068)/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.