Analysis of lung surfactant model systems with time-of-flight secondary ion mass spectrometry

Pulmonary Surfactant: A Mighty Thin Film

Pulmonary surfactant is a critical component of lung function in healthy individuals. It functions in part by lowering surface tension in the alveoli, thereby allowing for breathing with minimal effort. The prevailing thinking is that low surface tension is attained by a compression-driven squeeze-out of unsaturated phospholipids during exhalation, forming a film enriched in saturated phospholipids that achieves surface tensions close to zero. A thorough review of past and recent literature suggests that the compression-driven squeeze-out mechanism may be erroneous. Here, we posit that a surfactant film enriched in saturated lipids is formed shortly after birth by an adsorption-driven sorting process and that its composition does not change during normal breathing. We provide biophysical evidence for the rapid formation of an enriched film at high surfactant concentrations, facilitated by adsorption structures containing hydrophobic surfactant proteins. We examine biophysical evidence for and against the compression-driven squeeze-out mechanism and propose a new model for surfactant function. The proposed model is tested against existing physiological and pathophysiological evidence in neonatal and adult lungs, leading to ideas for biophysical research, that should be addressed to establish the physiological relevance of this new perspective on the function of the mighty thin film that surfactant provides.

Pulmonary surfactant: a unique biomaterial with life-saving therapeutic applications

Pulmonary surfactant is a complex lipoprotein mixture secreted into the alveolar lumen by type 2 pneumocytes, which is composed by tens of different lipids (approximately 90% of its entire mass) and surfactant proteins (approximately 10% of the mass). It is crucially involved in maintaining lung homeostasis by reducing the values of alveolar liquid surface tension close to zero at end-expiration, thereby avoiding the alveolar collapse, and assembling a chemical and physical barrier against inhaled pathogens. A deficient amount of surfactant or its functional inactivation is directly linked to a wide range of lung pathologies, including the neonatal respiratory distress syndrome. This paper reviews the main biophysical concepts of surfactant activity and its inactivation mechanisms, and describes the past, present and future roles of surfactant replacement therapy, focusing on the exogenous surfactant preparations marketed worldwide and new formulations under development. The closing section describes the pulmonary surfactant in the context of drug delivery. Thanks to its peculiar composition, biocompatibility, and alveolar spreading capability, the surfactant may work not only as a shuttle to the branched anatomy of the lung for other drugs but also as a modulator for their release, opening to innovative therapeutic avenues for the treatment of several respiratory diseases.

3D Molecular ToF-SIMS Imaging of Artificial Lipid Membranes Using a Discriminant Analysis-Based Algorithm

Artificial lipid membranes play a growing role in technical applications such as biosensors in pharmacological research and as model systems in the investigation of biological lipid films. In the standard procedure for displaying the distribution of membrane components, fluorescence microscopy, the fluorophores used can influence the distribution of the components and usually not all substances can be displayed at the same time. The discriminant analysis-based algorithm used in combination with scanning time-of-flight secondary ion mass spectrometry (ToF-SIMS) enables marker-free, quantitative, simultaneous recording of all membrane components. These data are used for reconstruction of distribution patterns. In the model system used for this survey, a tear fluid lipid layer, the distribution patterns of all lipids correlate well in calculated ToF-SIMS images and epi-fluorescence microscopic images. All epi-fluorescence microscopically viewable structures are visible when using both positive and negative secondary ions and can be reproduced with high lateral resolution in the submicrometer range despite the very low signal intensity and a very low signal-to-noise ratio. In addition, three-dimensional images can be obtained with a subnanometer depth resolution. Furthermore, structures and the distribution of substances that cannot be made visible by epi-fluorescence microscopy can be displayed. This enables new insights that cannot be gained by epi-fluorescence microscopy alone.

Secondary Ion Mass Spectrometry Analysis of Renal Cell Carcinoma with Electrospray Droplet Ion Beams

Tissue samples from renal cell carcinoma patients were analyzed by electrospray droplet ion beam-induced secondary ion mass spectrometry (EDI/SIMS). Positively- and negatively-charged secondary ions were measured for the cancerous and noncancerous regions of the tissue samples. Although specific cancerous species could not be found in both the positive and negative secondary ion spectra, the spectra of the cancerous and noncancerous tissues presented different trends. For instance, in the m/z range of 500–800 of the positive secondary ion spectra for the cancerous tissues, the intensities for several m/z values were lower than those of the m/z+2 peaks (indicating one double bond loss for the species), whereas, for the noncancerous tissues, the inverse trend was obtained. The tandem mass spectrometry (MS/MS) was also performed on the tissue samples using probe electrospray ionization (PESI), and some molecular ions produced by PESI were found to be fragmented into the ions observed in EDI/SIMS analysis. When the positive secondary ion spectra produced by EDI/SIMS were analyzed by principal component analysis, the results for cancerous and noncancerous tissues were separated. The EDI/SIMS method can be applied to distinguish between a cancerous and a noncancerous area with high probability.

C₆₀ fullerene promotes lung monolayer collapse

Airborne nanometre-sized pollutants are responsible for various respiratory diseases. Such pollutants can reach the gas-exchange surface in the alveoli, which is lined with a monolayer of lung surfactant. The relationship between physiological effects of pollutants and molecular-level interactions is largely unknown. Here, we determine the effects of carbon nanoparticles on the properties of a model of lung monolayer using molecular simulations. We simulate phase-separated lipid monolayers in the presence of a model pollutant nanoparticle, C₆₀ fullerene. In the absence of nanoparticles, the monolayers collapse only at very low surface tensions (around 0 mN m(-1)). In the presence of nanoparticles, instead, monolayer collapse is observed at significantly higher surface tensions (up to ca 10 mN m(-1)). Collapse at higher tensions is related to lower mechanical rigidity of the monolayer. It is possible that similar mechanisms operate on lung surfactant in vivo, which suggests that health effects of airborne carbon nanoparticles may be mediated by alterations of the mechanical properties of lung surfactant.

The mechanism of collapse of heterogeneous lipid monolayers

Collapse of homogeneous lipid monolayers is known to proceed via wrinkling/buckling, followed by folding into bilayers in water. For heterogeneous monolayers with phase coexistence, the mechanism of collapse remains unclear. Here, we investigated collapse of lipid monolayers with coexisting liquid-liquid and liquid-solid domains using molecular dynamics simulations. The MARTINI coarse-grained model was employed to simulate monolayers of ∼80 nm in lateral dimension for 10-25 μs. The monolayer minimum surface tension decreased in the presence of solid domains, especially if they percolated. Liquid-ordered domains facilitated monolayer collapse due to the spontaneous curvature induced at a high cholesterol concentration. Upon collapse, bilayer folds formed in the liquid (disordered) phase; curved domains shifted the nucleation sites toward the phase boundary. The liquid (disordered) phase was preferentially transferred into bilayers, in agreement with the squeeze-out hypothesis. As a result, the composition and phase distribution were altered in the monolayer in equilibrium with bilayers compared to a flat monolayer at the same surface tension. The composition and phase behavior of the bilayers depended on the degree of monolayer compression. The monolayer-bilayer connection region was enriched in unsaturated lipids. Percolation of solid domains slowed down monolayer collapse by several orders of magnitude. These results are important for understanding the mechanism of two-to-three-dimensional transformations in heterogeneous thin films and the role of lateral organization in biological membranes. The study is directly relevant for the function of lung surfactant, and can explain the role of nanodomains in its surface activity and inhibition by an increased cholesterol concentration.

Composition, structure and mechanical properties define performance of pulmonary surfactant membranes and films

The respiratory surface in the mammalian lung is stabilized by pulmonary surfactant, a membrane-based system composed of multiple lipids and specific proteins, the primary function of which is to minimize the surface tension at the alveolar air-liquid interface, optimizing the mechanics of breathing and avoiding alveolar collapse, especially at the end of expiration. The goal of the present review is to summarize current knowledge regarding the structure, lipid-protein interactions and mechanical features of surfactant membranes and films and how these properties correlate with surfactant biological function inside the lungs. Surfactant mechanical properties can be severely compromised by different agents, which lead to surfactant inhibition and ultimately contributes to the development of pulmonary disorders and pathologies in newborns, children and adults. A detailed comprehension of the unique mechanical and rheological properties of surfactant layers is crucial for the diagnostics and treatment of lung diseases, either by analyzing the contribution of surfactant impairment to the pathophysiology or by improving the formulations in surfactant replacement therapies. Finally, a short review is also included on the most relevant experimental techniques currently employed to evaluate lung surfactant mechanics, rheology, and inhibition and reactivation processes.

Understanding the mutual impact of interaction between hydrophobic nanoparticles and pulmonary surfactant monolayer

Interaction between hydrophobic nanoparticles (NPs) and a pulmonary surfactant (PS) film leads to a shift in molecular packing of surfactant molecules in the PS film around the interacting NPs. The resultant structural arrangement of surfactants around the NPs may be a potential structural factor responsible for their high retention ability within the film. Moreover, during this interaction, surfactant molecules coat the NPs and change their surface properties.

Role of lipid ordered/disordered phase coexistence in pulmonary surfactant function

The respiratory epithelium has evolved to produce a complicated network of extracellular membranes that are essential for breathing and, ultimately, survival. Surfactant membranes form a stable monolayer at the air-liquid interface with bilayer structures attached to it. By reducing the surface tension at the air-liquid interface, surfactant stabilizes the lung against collapse and facilitates inflation. The special composition of surfactant membranes results in the coexistence of two distinct micrometer-sized ordered/disordered phases maintained up to physiological temperatures. Phase coexistence might facilitate monolayer folding to form three-dimensional structures during exhalation and hence allow the film to attain minimal surface tension. These folded structures may act as a membrane reserve and attenuate the increase in membrane tension during inspiration. The present review summarizes what is known of ordered/disordered lipid phase coexistence in lung surfactant, paying attention to the possible role played by domain boundaries in the monolayer-to-multilayer transition, and the correlations of biophysical inactivation of pulmonary surfactant with alterations in phase coexistence.

High-resolution investigation of nanoparticle interaction with a model pulmonary surfactant monolayer

The pulmonary surfactant film spanning the inner alveolar surface prevents alveolar collapse during the end-exhalation and reduces the work of breathing. Nanoparticles (NPs) present in the atmosphere or nanocarriers targeted through the pulmonary route for medical purposes challenge this biological barrier. During interaction with or passage of NPs through the alveolar surfactant, the biophysical functioning of the film may be altered. However, experimental evidence showing detailed biophysical interaction of NPs with the pulmonary surfactant film are scant. In this study, we have investigated the impact of a hydrophobic polyorganosiloxane (AmOrSil20) NPs on the integrity as well as on the structural organization of the model pulmonary surfactant film. Primarily, scanning force microscopic techniques and electron microscopy have been used to visualize the topology as well as to characterize the localization of nanoparticles within the compressed pulmonary surfactant film. We could show that the NPs partition in the fluid phase of the compressed film at lower surface pressure, and at higher surface pressure, such NPs interact extensively with the surface-associated structures. Major amounts of NPs are retained at the interface and are released slowly into the aqueous subphase during repeated compression/expansion cycles. Further, the process of vesicle insertion into the interfacial film was observed to slow down with increasing NP concentrations. The hydrophobic AmOrSil20 NPs up to a given concentration do not substantially affect the structural organization and functioning of pulmonary surfactant film; however, such NPs do show drastic impacts at higher concentrations.

A modified squeeze-out mechanism for generating high surface pressures with pulmonary surfactant

The exact mechanism by which pulmonary surfactant films reach the very low surface tensions required to stabilize the alveoli at end expiration remains uncertain. We utilized the nanoscale sensitivity of atomic force microscopy (AFM) to examine phospholipid (PL) phase transition and multilayer formation for two Langmuir-Blodgett (LB) systems: a simple 3 PL surfactant-like mixture and the more complex bovine lipid extract surfactant (BLES). AFM height images demonstrated that both systems develop two types of liquid condensed (LC) domains (micro- and nano-sized) within a liquid expanded phase (LE). The 3 PL mixture failed to form significant multilayers at high surface pressure (π while BLES forms an extensive network of multilayer structures containing up to three bilayers. A close examination of the progression of multilayer formation reveals that multilayers start to form at the edge of the solid-like LC domains and also in the fluid-like LE phase. We used the elemental analysis capability of time-of-flight secondary ion mass spectrometry (ToF-SIMS) to show that multilayer structures are enriched in unsaturated PLs while the saturated PLs are concentrated in the remaining interfacial monolayer. This supports a modified squeeze-out model where film compression results in the hydrophobic surfactant protein-dependent formation of unsaturated PL-rich multilayers which remain functionally associated with a monolayer enriched in disaturated PL species. This allows the surface film to attain low surface tensions during compression and maintain values near equilibrium during expansion.

Physicochemical studies on the interaction of serum albumin with pulmonary surfactant extract in films and bulk bilayer phase

Functionality, structure and composition of the adsorbed films of bovine lipid extract surfactant (BLES), in the absence and presence of bovine serum albumin (BSA), at the air-buffer interface was characterized through surface tension, atomic force microscopy and time of flight secondary ion mass spectrometric methods. Gel and fluid domains of BLES films were found to be altered significantly in the presence of BSA. Differential scanning calorimetric studies on BLES dispersions in presence of BSA revealed that the perturbations of the lipid bilayer structures were significant only at higher amount of BSA. FTIR studies on the BLES dispersions in buffer solution revealed that BSA could affect the lipid head-group hydrations in bilayer as well as the methylene and methyl vibration modes of fatty acyl chains of the phospholipids present in BLES. Serum albumin could perturb the film structure at pathophysiological concentration while higher amount of BSA was required in perturbing the bilayer structures. The studies suggest a connected perturbed bilayer to monolayer transition model for surfactant inactivation at the alveolar-air interface in dysfunctional surfactants.

Characterization of streptavidin binding to biotinylated, binary self-assembled thiol monolayers--influence of component ratio and solvent

Many biosensor applications are based on streptavidin (SA) binding to partially biotinylated self-assembled thiol monolayers (SAMs). In our study, binary SAMs on gold were prepared from solutions containing 16-mercapto-1-hexadecanol (thiol I) and N-(8-biotinyl-3,6-dioxa-octanamidyl)-16-mercaptohexadecanamide (thiol II) in varying component ratios. Either chloroform or ethanol was used as solvent. After 24 h thiol incubation, SA was immobilized on the resulting SAMs using the strong SA-biotin interaction. The SA binding process was monitored by QCM-D (quartz crystal microbalance monitoring dissipation factor). It is shown that the Sauerbrey equation is valid to calculate the mass quantities of the immobilized SA layers. Under the chosen incubation conditions, marginal fractions of the biotinylated component II in chloroform ((n(I)/n(II))(solution) approximately = 1000) lead to SAMs which ensure a maximal SA binding quantity of m(Sauerbrey SA) approximately = 400 ng x cm(-2), being equivalent to a SA single-layer arrangement on the SAM surface. In case of incubations from ethanolic solutions, a complete SA layer formation needs significantly higher amounts of the biotinylated component II during SAM preparation ((n(I)/n(II))(solution) approximately = 50). X-ray photoelectron spectroscopy data show that the fraction of biotinylated thiol II in the SAM determines the amount of surface-bound SA. The SAM thiol ratio ((n(I)/n(II))(SAM)) not only depends on the corresponding component ratio in the incubation solution, but is also strongly influenced by the solvent. Using chloroform as solvent during SAM preparation significantly increased the fraction of biotinylated thiol II in the SAMs compared to ethanol.

Two novel mutations in surfactant protein-C, lung function and obstructive lung disease

Dominant mutations in the surfactant protein-C(SFTPC) gene have been linked with interstitial lung disease. The frequency of lung disease due to SFTPC mutations in the general population is unknown. The aim of this study was to identify novel SFTPC mutations that are associated with lung function or disease in the general population. We resequenced the SFTPC gene in 760 individuals and identified 18 genetic variants, of which 5 were novel. Of the five novel mutations, two were situated in highly conserved areas of the SFTPC gene: A53T and Y106X. We genotyped the Copenhagen City Heart Study(n=10,604) and the Copenhagen General Population Study(n=37,337) to assess the clinical relevance of these mutations. Genotyping identified 36 individuals heterozygous for A53T and 3 individuals heterozygous for Y106X. A53T heterozygotes and Y106X heterozygotes did not differ from non-carriers in FEV(1)% predicted, FVC% predicted or FEV(1)/FVC. A53T heterozygotes had a two-fold increased risk for asthma in the Copenhagen City Heart Study and Copenhagen General Population Study combined (adjusted odds ratio 2.2(1.0-4.9)). A53T heterozygotes did not differ consistently from non-carriers in risk of chronic obstructive pulmonary disease or interstitial lung disease. No Y106X heterozygotes suffered from asthma, chronic obstructive pulmonary disease (COPD), or interstitial lung disease. We identified two novel mutations in highly conserved areas of the SFTPC gene, and show that heterozygotes for the mutations have normal lung function and are unaffected by COPD and interstitial lung disease. A53T heterozygotes had increased asthma risk, but further research is required to conclusively determine whether this mutation is associated with asthma.

Surface view of the lateral organization of lipids and proteins in lung surfactant model systems-a ToF-SIMS approach

The lateral organization of domain structures is an extremely significant aspect of biomembrane research. Chemical imaging by mass spectrometry with its recent advancement in sensitivity and lateral resolution has become a highly promising tool in biological research. In this review, we focus briefly on the instrumentation, working principle and important concepts related to time-of-flight secondary ion mass spectrometry followed by an overview of lipid/protein fragmentation patterns and chemical mapping. The key issues addressed are the applications of time-of-flight secondary ion mass spectrometry in biological membrane research. Additionally, we briefly review our recent investigations based on time-of-flight secondary ion mass spectrometry to unravel the lateral distribution of lipids and surfactant proteins in lung surfactant model systems as an example that highlights the importance of fluidity and ionic conditions on lipid phase behavior and lipid-protein interactions.

Calcium ions as "miscibility switch": colocalization of surfactant protein B with anionic lipids under absolute calcium free conditions

One of the main determinants of lung surfactant function is the complex interplay between its protein and lipid components. The lipid specificity of surfactant protein B (SP-B), however, and the protein's ability to selectively squeeze out lipids, has remained contradictory. In this work we present, for the first time to our knowledge, by means of time-of-flight secondary ion mass spectrometry chemical imaging, a direct evidence for colocalization of SP-B as well as its model peptide KL(4) with negatively charged dipalmitoylphosphatidylglycerol under absolute calcium free conditions. Our results prove that protein/lipid localization depends on the miscibility of all surfactant components, which itself is influenced by subphase ionic conditions. In contrast to our earlier studies reporting SP-B/KL(4) colocalization with zwitterionic dipalmitoylphosphatidylcholine, in the presence of even the smallest traces of calcium, we finally evidence an apparent reversal of protein/lipid mixing behavior upon calcium removal with ethylene diamine tetraacetic acid. In addition, scanning force microscopy measurements reveal that by depleting the subphase from calcium ions the protrusion formation ability of SP-B or KL(4) is not hampered. However, in the case of KL(4), distinct differences in protrusion morphology and height are visible. Our results support the idea that calcium ions act as a "miscibility switch" in surfactant model systems and probably are one of the major factors steering lipid/protein mixing behavior as well as influencing the protein's protrusion formation ability.

Advances in imaging secondary ion mass spectrometry for biological samples

Imaging mass spectrometry combines the power of mass spectrometry to identify complex molecules based on mass with sample imaging. Recent advances in secondary ion mass spectrometry have improved sensitivity and spatial resolution, so that these methods have the potential to bridge between high-resolution structures obtained by X-ray crystallography and cyro-electron microscopy and ultrastructure visualized by conventional light microscopy. Following background information on the method and instrumentation, we address the key issue of sample preparation. Because mass spectrometry is performed in high vacuum, it is essential to preserve the lateral organization of the sample while removing bulk water, and this has been a major barrier for applications to biological systems. Recent applications of imaging mass spectrometry to cell biology, microbial communities, and biosynthetic pathways are summarized briefly, and studies of biological membrane organization are described in greater depth.

Pulmonary surfactant model systems catch the specific interaction of an amphiphilic peptide with anionic phospholipid

Interfacial behavior was studied in pulmonary surfactant model systems containing an amphiphilic alpha-helical peptide (Hel 13-5), which consists of 13 hydrophobic and five hydrophilic amino acid residues. Fully saturated phospholipids of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) were utilized to understand specific interactions between anionic DPPG and cationic Hel 13-5 for pulmonary functions. Surface pressure (pi)-molecular area (A) and surface potential (DeltaV)-A isotherms of DPPG/Hel 13-5 and DPPC/DPPG (4:1, mol/mol)/Hel 13-5 preparations were measured to obtain basic information on the phase behavior under compression and expansion processes. The interaction leads to a variation in squeeze-out surface pressures against a mole fraction of Hel 13-5, where Hel 13-5 is eliminated from the surface on compression. The phase behavior was visualized by means of Brewster angle microscopy, fluorescence microscopy, and atomic force microscopy. At low surface pressures, the formation of differently ordered domains in size and shape is induced by electrostatic interactions. The domains independently grow upon compression to high surface pressures, especially in the DPPG/Hel 13-5 system. Under the further compression process, protrusion masses are formed in AFM images in the vicinity of squeeze-out pressures. The protrusion masses, which are attributed to the squeezed-out Hel 13-5, grow larger in lateral size with increasing DPPG content in phospholipid compositions. During subsequent expansion up to 35 mN m(-1), the protrusions retain their height and lateral diameter for the DPPG/Hel 13-5 system, whereas the protrusions become smaller for the DPPC/Hel 13-5 and DPPC/DPPG/Hel 13-5 systems due to a reentrance of the ejected Hel 13-5 into the surface. In this work we detected for the first time, to our knowledge, a remarkably large hysteresis loop for cyclic DeltaV-A isotherms of the binary DPPG/Hel 13-5 preparation. This exciting phenomenon suggests that the specific interaction triggers two completely independent processes for Hel 13-5 during repeated compression and expansion: 1), squeezing-out into the subsolution; and 2), and close packing as a monolayer with DPPG at the interface. These characteristic processes are also strongly supported by atomic force microscopy observations. The data presented here provide complementary information on the mechanism and importance of the specific interaction between the phosphatidylglycerol headgroup and the polarized moiety of native surfactant protein B for biophysical functions of pulmonary surfactants.

Morphology modifications in negatively charged lipid monolayers upon mitochondrial creatine kinase binding

Mitochondrial creatine kinase (mtCK) may participate to membrane organization at the mitochondrial level by modulating lipid state and fluidity. The effect of the protein on lipid phase behaviour of different acyl chain length phosphatidylglycerol monolayers was analyzed from pressure-area isotherms and from the compressional modulus variation with respect to the surface pressure. Monolayer morphology was visualized by Brewster angle microscopy. No condensation effect was visible on dimyristoylphosphatidylglycerol (DMPG). For the other PG monolayers tested, dipalmitoylphosphatidylglycerol (DPPG) and distearoylphosphatidylglycerol (DSPG), mtCK facilitated the formation of a liquid condensed phase. The effect depended on the surface pressure at which transition phase occurred. The effect of mtCK was more pronounced for tetramyristoylcardiolipin (TMCL) monolayers, as liquid condensed regions appeared 10 mN/m below the transition phase of the pure TMCL monolayer. The observed domains were circular and rather uniform, indicating a stabilization of the condensed phase. The same effect, namely an overall condensation of the monolayer with formation of circular domains, was observed upon protein injection beneath TMCL monolayers in different condensation states at constant area. MtCK ability to induce and stabilize a LC phase on monolayers could have important consequences in membrane organization and emphasize its structural role at mitochondrial level.

Nanomedicine--challenge and perspectives

The application of nanotechnology concepts to medicine joins two large cross-disciplinary fields with an unprecedented societal and economical potential arising from the natural combination of specific achievements in the respective fields. The common basis evolves from the molecular-scale properties relevant to the two fields. Local probes and molecular imaging techniques allow surface and interface properties to be characterized on a nanometer scale at predefined locations, while chemical approaches offer the opportunity to elaborate and address surfaces, for example, for targeted drug delivery, enhanced biocompatibility, and neuroprosthetic purposes. However, concerns arise in this cross-disciplinary area about toxicological aspects and ethical implications. This Review gives an overview of selected recent developments and applications of nanomedicine.

Mass spectral imaging of glycophospholipids, cholesterol, and glycophorin a in model cell membranes

Time of flight secondary ion mass spectrometry (ToF-SIMS) and the Langmuir-Blodgett (LB) technique have been used to create and analyze reproducible membrane mimics of the inner and outer leaflets of a cellular membrane to investigate lipid-protein and lipid-lipid interactions. Films composed of phospholipids, cholesterol and an integral membrane protein were utilized. The results show the outer membrane leaflet mimic (DPPC/cholesterol/glycophorin A LB film) consisting of a single homogeneous phase whereas the inner membrane leaflet mimic (DPPE/cholesterol/glycophorin A LB film) displays heterogeneity in the form of two separate phases. A DPPE/cholesterol phase and a glycophorin A phase. This points to differences in membrane domain formation based upon the different chemical composition of the leaflets of a cell membrane. The reliability of the measurements was enhanced by establishing the influence of the matrix effect upon the measurement and by utlilizing PCA to enhance the contrast of the images.

Current perspectives in pulmonary surfactant--inhibition, enhancement and evaluation

Pulmonary surfactant (PS) is a complicated mixture of approximately 90% lipids and 10% proteins. It plays an important role in maintaining normal respiratory mechanics by reducing alveolar surface tension to near-zero values. Supplementing exogenous surfactant to newborns suffering from respiratory distress syndrome (RDS), a leading cause of perinatal mortality, has completely altered neonatal care in industrialized countries. Surfactant therapy has also been applied to the acute respiratory distress syndrome (ARDS) but with only limited success. Biophysical studies suggest that surfactant inhibition is partially responsible for this unsatisfactory performance. This paper reviews the biophysical properties of functional and dysfunctional PS. The biophysical properties of PS are further limited to surface activity, i.e., properties related to highly dynamic and very low surface tensions. Three main perspectives are reviewed. (1) How does PS permit both rapid adsorption and the ability to reach very low surface tensions? (2) How is PS inactivated by different inhibitory substances and how can this inhibition be counteracted? A recent research focus of using water-soluble polymers as additives to enhance the surface activity of clinical PS and to overcome inhibition is extensively discussed. (3) Which in vivo, in situ, and in vitro methods are available for evaluating the surface activity of PS and what are their relative merits? A better understanding of the biophysical properties of functional and dysfunctional PS is important for the further development of surfactant therapy, especially for its potential application in ARDS.

Influence of lipid saturation grade and headgroup charge: a refined lung surfactant adsorption model

Rapid adsorption of surfactant material to the air/liquid interface of the lung is essential for maintaining normal lung function. The detailed mechanism of this process, however, remains unclear. In this study, we elucidate the influence of lipid saturation grade and headgroup charge of surface layer lipids on surfactant protein (SP)-induced vesicle insertion into monolayers spread at the air/water interface of a film balance. We used dipalmitoylphosphatidlycholine (DPPC),1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) as monolayer lipids doped with either hydrophobic surfactant-specific protein SP-B or SP-C (0.2 and 0.4 mol %, respectively). Vesicles consisting of DPPC/DPPG (4:1, mol ratio) were injected into a stirred subphase to quantify adsorption kinetics. Based on kinetic film balance and fluorescence measurements, a refined model describing distinct steps of vesicle adsorption to surfactant monolayers is presented. First, in a protein-independent step, lipids from vesicles bridged to the interfacial film by Ca(2+) ions are inserted into defects of a disordered monolayer at low surface pressures. Second, in a SP-facilitated step, active material insertion involving an SP-B- or SP-C-induced flip-flop of lipids occurs at higher surface pressures. Negatively charged lipids obviously influence the threshold pressures at which this second protein-mediated adsorption mechanism takes place.

Structural characterization of the monolayer-multilayer transition in a pulmonary surfactant model: IR studies of films transferred at continuously varying surface pressures

The four-component system acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC)/1,2-dipalmitoylphosphatidylglycerol/ (DPPG)/pulmonary surfactant protein SP-C/cholesterol provides a useful model for in vitro biophysical studies of the reversible monolayer to multilayer transition that occurs during compression <--> expansion cycles in the lung. Monolayer films of this mixture (with chain perdeuterated DPPC-d62) at the air/water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP (continuously varying surface pressures) (Langmuir 2007, 23, 4958). The thermodynamic properties of the Langmuir films have been examined with pressure-area isotherms, while the molecular properties of the film constituents in the transferred films in the monolayer and multilayer phases have been examined with IR spectroscopy. Quantitative intensity measurements of the DPPC-d62, DPPG, and SP-C components in each phase reveal that the DPPG and SP-C constituents are relatively enriched in the multilayer compared with the DPPC-d62, although all three species are present in both phases. Some molecular structure information is available from the surface-pressure-induced variation in IR parameters. The DPPC-d62 exhibits slightly increased conformational order in the multilayer phase as detected from decreases in the CD2 stretching frequencies upon compression, while the lipid phosphate residues become dehydrated, as deduced from increases in the 1245 cm-1 symmetric PO2- stretching frequency. A small increase is observed in the protein amide I frequency; possible interpretations of these changes are presented. The current observations are compared with ideas contained in the "squeeze-out hypothesis" (Handbook of Physiology, The Respiratory System; American Physiological Society Press: Bethesda, MD, 1986; Vol. III, p 247) and in the "liquid crystalline collapse" model (Biophys. J. 2003, 84, 3792). Within the limitation of the current procedures, the data contain elements from both these descriptions of the monolayer transformation. Extensions and possible limitations of the COVASP-IR method are discussed.

Atomic force microscopy studies of functional and dysfunctional pulmonary surfactant films. I. Micro- and nanostructures of functional pulmonary surfactant films and the effect of SP-A

Monolayers of a functional pulmonary surfactant (PS) can reach very low surface tensions well below their equilibrium value. The mechanism by which PS monolayers reach such low surface tensions and maintain film stability remains unknown. As shown previously by fluorescence microscopy, phospholipid phase transition and separation seem to be important for the normal biophysical properties of PS. This work studied phospholipid phase transitions and separations in monolayers of bovine lipid extract surfactant using atomic force microscopy. Atomic force microscopy showed phospholipid phase separation on film compression and a monolayer-to-multilayer transition at surface pressure 40-50 mN/m. The tilted-condensed phase consisted of domains not only on the micrometer scale, as detected previously by fluorescence microscopy, but also on the nanometer scale, which is below the resolution limits of conventional optical methods. The nanodomains were embedded uniformly within the liquid-expanded phase. On compression, the microdomains broke up into nanodomains, thereby appearing to contribute to tilted-condensed and liquid-expanded phase remixing. Addition of surfactant protein A altered primarily the nanodomains and promoted the formation of multilayers. We conclude that the nanodomains play a predominant role in affecting the biophysical properties of PS monolayers and the monolayer-to-multilayer transition.

Sphingomyelin/phosphatidylcholine and cholesterol interactions studied by imaging mass spectrometry

Label-free imaging mass spectrometry is utilized the first time to study lipid-lipid interactions in a model membrane system. Ternary lipid mixtures of cholesterol (CH), sphingomyelin (SM), and phosphatidylcholine (PC) on supported Langmuir-Blodgett films are investigated as a mimic of the cellular membrane. The unique chemical specificity and imaging capability allow identification and localization of each lipid molecule in the membranes. The SM and PC in each ternary mixture vary in their acyl chain saturation with both, either, or neither one double bonded at the same position of their acyl chain. For the ternary mixtures with SM and PC both saturated or unsaturated, all the lipids are evenly distributed in the molecule-specific images. However, domain structures were observed for the two mixtures with either SM or PC unsaturated. In both films, the saturated lipid, whether it is SM or PC, colocalized with CH while the unsaturated lipid was excluded from the CH domains. These results strongly suggest that acyl chain saturation, rather than the specific interactions between SM and CH, is the dominating factor for SM colocalization with CH in the raft areas of the cellular membranes.

Solubility versus electrostatics: what determines lipid/protein interaction in lung surfactant

Mammalian lung surfactant is a complex lipid/protein mixture covering the alveolar interface and has the crucial function of reducing the surface tension at this boundary to minimal values. Surfactant protein SP-B plays an important role for this purpose and was the focus of many recent studies. However, the specificity of lipid/SP-B interactions is controversial. Since these investigations were accomplished at varying pH conditions (pH 5.5 and 7.0), we studied the specificity of these interactions in a dipalmitoylphosphatidylcholine (DPPC)/dipalmitoylphosphatidylglycerol (DPPG)/SP-B (4:1:0.2 mol %) model system at either pH. Mainly fluorescence microscopy and laterally resolved time-of-flight secondary ion mass spectrometry were used to reveal information about the phase behavior of the lipids and the molecular distribution of SP-B in the lipid mixture. DPPG forms separated condensed domains due to a strong hydrogen-bond network, from which the protein is mainly excluded. Considering the protein as an impurity of the lipid mixture leads to the principle of the zone melting process: an impurity is highly more soluble in a liquid phase than in a solid phase. The phase behavior effect of the lipids mainly outperforms the electrostatic interactions between DPPG and SP-B, leading to a more passively achieved colocalization of DPPC and SP-B.

Localization of sphingomyelin in cholesterol domains by imaging mass spectrometry

The location of each lipid in a palmitoyloleoylphosphatidylcholine/18:0 sphingomyelin/cholesterol monolayer system is laterally resolved using imaging time-of-flight secondary ion mass spectrometry (TOF-SIMS) without the necessity of adding fluorescent labels. This system of coexisting immiscible liquid phases shows cholesterol domains with sizes and shapes comparable to those in the fluorescence microscopy literature. The results show that SM localizes with cholesterol and that palmitoyloleoylphosphatidylcholine is excluded. Moreover, the segregation is not complete, and there is a small amount of both phospholipids distributed throughout.

New insights into lung surfactant monolayers using vibrational sum frequency generation spectroscopy

At the air-water interface, interfacial molecular structure, intermolecular interactions, film relaxation and film respreading of model lung surfactant monolayers were studied using vibrational sum frequency generation (VSFG) spectroscopy combined with a Langmuir film balance. Chain-perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoyl-phosphatidylglycerol (POPG), palmitic acid (PA) and tripalmitin were investigated. In the DPPC-d62-PA binary monolayer, PA showed a condensing effect on the DPPC chains. On the contrary, in the DPPC-d62-POPG binary monolayer, POPG showed a fluidizing effect on the DPPC chains. In the ternary monolayer system of DPPC-d62-POPG-PA, the balance between the fluidizing and the condensing effect was also observed. In addition, the film relaxation behavior of DPPC-d62 and the enhanced film stability of DPPC-d62 caused by the addition of tripalmitin were observed. Real-time VSFG was also employed to study the respreading properties of a complex lung surfactant mixture containing DPPC-d62, POPG, PA and KL4 (a mimic of SP-B) peptide, which revealed DPPC enrichment after film compression.

Langmuir-Blodgett films formed by continuously varying surface pressure. Characterization by IR spectroscopy and epifluorescence microscopy

Monolayer films of phospholipids at the air-water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP. The molecular and supramolecular properties of the film constituents have been characterized with two complementary techniques. IR spectroscopy was used to monitor chain conformation as a function of transfer surface pressure. Results were compared to those from Langmuir films determined directly at the A/W interface by IR reflection-absorption spectroscopy (IRRAS). The methylene stretching frequencies for both proteated and acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC and DPPC-d62) in the transferred molecules indicate that the phospholipids retain at least, in part, their surface pressure-dependent chain-conformational order characteristics. The line widths of these modes are somewhat reduced, suggestive of slower rates of reorientational motion in the Langmuir-Blodgett (LB) films. Epifluorescence microscopy reveals a progressive condensation gradient, including nucleation and growth of probe-excluding condensed domains along the transfer line. DPPC condensation, observed along a single LB film, was qualitatively comparable to compression-driven condensation as observed in situ or in conventional LB films transferred at constant pressures. However, condensation along the compression isotherm in COVASP-LB films was reduced by 15-20% as compared to films equilibrated at different constant pressures, probably the result of kinetic differences in equilibration processes. As a preliminary demonstration of the utility of this new approach, the monolayer --> multilayer transition known to occur (Eur. Biophys. J. 2005, 34, 243) in a four-component model for pulmonary surfactant has been examined. IR parameters from both the lipid and the protein constituents of the film all indicate that the transition persists during the transfer process. This new approach for the study of transferred films will permit the efficient characterization of lipid-protein interactions and structural transitions occurring in pulmonary surfactant films subjected to dynamic compression.

Surfactant protein C and lung function: new insights into the role of α-helical length and palmitoylation

Surfactant protein C (SP-C) is known to be essential for lung function and the formation of a surface confined reservoir at the alveolar interface. The structural features relevant for the peptide's extraordinary ability to form extended three-dimensional structures were systematically investigated and are summarized in the present paper. The influence of palmitoylation was studied for full length SP-Cs as well as truncated variants with the N-terminal residues 1-17 and 1-13, respectively. The combined results from film balance measurements, fluorescence microscopy (FLM) and scanning force microscopy (SFM) reveal a fine-tuned balance between the influence of the palmitoyl chains and alpha-helical length. Native SP-C added to DPPC/DPPG monolayers (molar ratio 80:20) induced the formation of the surface confined reservoir independent of its palmitoylation degree. However, topographic images revealed that only bilayers and not multilayers where formed when the acyl chains were missing. The influence of palmitoylation increased when alpha-helical length was considerably reduced to 17 or even 13 amino acid residues. In these strongly truncated SP-C peptides palmitoyl chains increased monolayer stability and anchored the peptides in the lipid film. However, no multilayer formation was observed at all for all shortened peptides. The alpha-helix of SP-C seems to be a prerequisite for the formation of extended three-dimensional structures and obviously has to be able to span a lipid bilayer. Palmitoylation obviously mediates interactions between lipids and/or peptides not only within a protein/lipid film but also between neighbouring layers and induces a stacking of bilayers.

Phase Separation of Lipid Membranes Analyzed with High-Resolution Secondary Ion Mass Spectrometry

Lateral variations in membrane composition are postulated to play a central role in many cellular events, but it has been difficult to probe membrane composition and organization on length scales of tens to hundreds of nanometers. We present a high-resolution imaging secondary ion mass spectrometry technique to reveal the lipid distribution within a phase-separated membrane with a lateral resolution of approximately 100 nanometers. Quantitative information about the chemical composition within small lipid domains was obtained with the use of isotopic labels to identify each molecular species. Composition variations were detected within some domains.

DPPC Langmuir monolayer at the air-water interface: probing the tail and head groups by vibrational sum frequency generation spectroscopy

Dipalmitoylphosphatidylcholine (DPPC) is the predominant lipid component in lung surfactant. In this study, the Langmuir monolayer of deuterated dipalmitoylphosphatidylcholine (DPPC-d62) in the liquid-expanded (LE) phase and the liquid-condensed (LC) phase has been investigated at the air-water interface with broad bandwidth sum frequency generation (BBSFG) spectroscopy combined with a Langmuir film balance. Four moieties of the DPPC molecule are probed by BBSFG: the terminal methyl (CD3) groups of the tails, the methylene (CD2) groups of the tails, the choline methyls (CH3) in the headgroup, and the phosphate in the headgroup. BBSFG spectra of the four DPPC moieties provide information about chain conformation, chain orientation, headgroup orientation, and headgroup hydration. These results provide a comprehensive picture of the DPPC phase behavior at the air-water interface. In the LE phase, the DPPC hydrocarbon chains are conformationally disordered with a significant number of gauche configurations. In the LC phase, the hydrocarbon chains are in an all-trans conformation and are tilted from the surface normal by 25 degrees. In addition, the orientations of the tail terminal methyl groups are found to remain nearly unchanged with the variation of surface area. Qualitative analysis of the BBSFG spectra of the choline methyl groups suggests that these methyl groups are tilted but lie somewhat parallel to the surface plane in both the LE and LC phases. The dehydration of the phosphate headgroup due to the LE-LC phase transition is observed through the frequency blue shift of the phosphate symmetric stretch in the fingerprint region. In addition, implications for lung surfactant function from this work are discussed.

Lipid specificity of surfactant protein B studied by time-of-flight secondary ion mass spectrometry

One of the key functions of mammalian pulmonary surfactant is the reduction of surface tension to minimal values. To fulfill this function it is expected to become enriched in dipalmitoylphosphatidylcholine either on its way from the alveolar type II pneumocytes to the air/water interface of the lung or within the surface film during compression and expansion of the alveoli during the breathing cycle. One protein that may play a major role in this enrichment process is the surfactant protein B. The aim of this study was to identify the lipidic interaction partner of this protein. Time-of-flight secondary ion mass spectrometry was used to analyze the lateral distribution of the components in two SP-B-containing model systems. Either native or partly isotopically labeled lipids were analyzed. The results of both setups give strong indications that, at least under the specific conditions of the chosen model systems (e.g., concerning pH and lipid composition), the lipid interacting with surfactant protein B is not phosphatidylglycerol as generally accepted, but dipalmitoylphosphatidylcholine instead.

Lung-surfactant-meconium interaction: in vitro study in bulk and at the air-solution interface

Lung surfactants (LSs) form a monolayer at the lung's alveoli air-solution interface and play a crucial role in making normal breathing possible by reducing the surface tension. LS are affected by various agents that hamper their normal functioning. Tobacco smoke [Bringezu, F.; Pinkerton, K. E.; Zasadzinski, J. A. Langmuir 2003, 19, 2900-2907] and meconium, the first excrement of the newborn, are examples for such LS poison. In neonates, intrauterine aspiration of meconium is a known cause for morbidity and mortality. We studied in vitro the interactions between modified porcine LSs (Curosurf), used as LS replacement, and meconium, as well as between their artificial analogues, phospholipids mixture, and taurocholic acid (TA), respectively. The interactions were examined both in the bulk solution and at the air-water interface, representing the pre- and postnatal situations. It was found that the artificial analogues represent the natural system reliably and exhibit similar effects. TA, a principle component of bile, is an amphiphilic sterol compound in which the hydrophilic and hydrophobic moieties are presented at different faces of the sterol plane. Here we found that TA affects the structure of both monolayers at the interface and surfactant aggregates in solution. A likely poisoning mechanism is by stereoselective penetration of TA into the lamellar or monolayer structures, thus disrupting the contiguous structure of the intact monolayer or the bilayer vesicle structure.