Discrepancy between phase behavior of lung surfactant phospholipids and the classical model of surfactant function

Pulmonary Surfactant: A Mighty Thin Film

Pulmonary surfactant is a critical component of lung function in healthy individuals. It functions in part by lowering surface tension in the alveoli, thereby allowing for breathing with minimal effort. The prevailing thinking is that low surface tension is attained by a compression-driven squeeze-out of unsaturated phospholipids during exhalation, forming a film enriched in saturated phospholipids that achieves surface tensions close to zero. A thorough review of past and recent literature suggests that the compression-driven squeeze-out mechanism may be erroneous. Here, we posit that a surfactant film enriched in saturated lipids is formed shortly after birth by an adsorption-driven sorting process and that its composition does not change during normal breathing. We provide biophysical evidence for the rapid formation of an enriched film at high surfactant concentrations, facilitated by adsorption structures containing hydrophobic surfactant proteins. We examine biophysical evidence for and against the compression-driven squeeze-out mechanism and propose a new model for surfactant function. The proposed model is tested against existing physiological and pathophysiological evidence in neonatal and adult lungs, leading to ideas for biophysical research, that should be addressed to establish the physiological relevance of this new perspective on the function of the mighty thin film that surfactant provides.

Interactions of particulate matter and pulmonary surfactant: Implications for human health

Particulate matter (PM), which is the primary contributor to air pollution, has become a pervasive global health threat. When PM enters into a respiratory tract, the first body tissues to be directly exposed are the cells of respiratory tissues and pulmonary surfactant. Pulmonary surfactant is a pivotal component to modulate surface tension of alveoli during respiration. Many studies have proved that PM would interact with pulmonary surfactant to affect the alveolar activity, and meanwhile, pulmonary surfactant would be adsorbed to the surface of PM to change the toxic effect of PM. This review focuses on recent studies of the interactions between micro/nanoparticles (synthesized and environmental particles) and pulmonary surfactant (natural surfactant and its models), as well as the health effects caused by PM through a few significant aspects, such as surface properties of PM, including size, surface charge, hydrophobicity, shape, chemical nature, etc. Moreover, in vitro and in vivo studies have shown that PM leads to oxidative stress, inflammatory response, fibrosis, and cancerization in living bodies. By providing a comprehensive picture of PM-surfactant interaction, this review will benefit both researchers for further studies and policy-makers for setting up more appropriate regulations to reduce the adverse effects of PM on public health.

Lung surfactant monolayer - A good natural barrier against dibenzo-p-dioxins

The present study deals with interaction of two air pollutants: dibenzodioxin, DD, and its' monochlorinated derivative, 2-chlorodibenzodioxin, 2CLDD, with models of the lung surfactant (LS) system. A monolayer composed of DPPC and POPC in 1:1 molar ratio was used as a model of LS. One component monolayers of DPPC and POPC were also examined, to model the interiors of LC and LE domains in LS, respectively. Molecular dynamics simulations and measurements of surface pressure isotherms, as well as polarization modulation-infrared reflection-absorption spectra were employed to study the influence of dioxins on the monolayers. We demonstrate, that both dioxins adsorb and accumulate in the hydrophobic parts of all three monolayers. DD molecules prefer flat orientation on the surface at large areas. Upon compression, they lift and orient perpendicularly to the monolayer. Flat orientation of DD molecules leads to their large surface area. In consequence they preferentially locate in vicinity of unsaturated chains of POPC - they are small enough to fill void spaces created by kinks in unsaturated chains. 2CLDD orient along monolayer normal already at the largest areas and preference for POPC was not observed for them. In laterally relaxed states, a condensing effect, connected with reduction of surface area available to the lipids was observed for both dioxins. In the case of 2CLDD, additional locally ordering influence of dioxin molecules was detected. In compressed states, the presence of dioxin molecules hinders alignment and uniform ordering of lipid chains.

The role of DPPG in lung surfactant exposed to benzo[a]pyrene

Lung surfactant (LS) occurs at the air-water interface in the alveoli. Its main function is to reduce the work needed to expand the alveoli during inhalation and prevent the alveolar collapse during exhalation. Disturbance of this complex interfacial system by the uptake of pollutant molecules can lead to changes in fluidity, permeability, phase separation and domain formation, which in turn can lead to serious impairment in lung function. Knowledge of the LS-pollutant interaction is essential for understanding the mechanism of this process. In this study, we investigate the interaction of LS models with benzo[a]pyrene (BaP). Dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) sodium salt, and their 4 : 1 mixture are used as LS models. Surface pressure-area isotherms and molecular dynamics simulations are employed to study the properties of LS monolayers. It was found that the addition of BaP has a destabilizing effect on the mixed DPPC/DPPG monolayer, manifested by the decrease in surface pressure. Compression of a monolayer during a respiratory cycle may expel BaP to the bulk solution. It was demonstrated that DPPG is an active component that prevents the BaP molecule from entering the water subphase; as a minor component of LS it can effectively reduce this process. In addition, the presence of BaP in LS models induces the reduction of monolayer hydration in the hydrophilic region and the increase in chain ordering in the hydrophobic region. The observed changes in monolayer fluidity and phase behavior can be a source of various lung function disorders.

The impact of lipid oxidation on the functioning of a lung surfactant model

Apart from being responsible for sufficient pulmonary compliance and preventing alveolar collapse, lung surfactant (LS) also forms the first barrier for uptake of inhaled pathogens. As such it is susceptible to damage caused by various deleterious compounds present in air, e.g. oxidants capable of oxidizing unsaturated LS lipids. This study examines the consequences of oxidizing 20% of unsaturated lipids in an LS model: a mixed 1 : 1 DPPC : POPC monolayer. POxnoPC (1-palmitoyl-2-(9-oxo-nonanoyl)-sn-glycero-3-phosphocholine) is considered as the main oxidation product. Experimental surface pressure-area isotherms and polarization-modulation infrared reflection-absorption spectroscopy are employed to probe changes in the macroscopic properties of the unsaturated lipid monolayer induced by oxidation. Microscopic details of the influence of oxidation on the monolayer's phase behavior are elucidated by molecular dynamics simulations at varying lipid packing. We demonstrate that unsaturated lipid oxidation shifts the isotherm towards larger areas and advances monolayer collapse. This is caused by a reversal of the oxidized sn-2 chains of POxnoPC towards the subphase, driven by electrostatic interactions between the aldehyde, glycerin, and water. Increased lipid bulkiness, hindered transition to the LC phase, and transfer of oxidized chain terminals to the subphase have been identified as the most troublesome consequences of this process. They result in the reduction of monolayer stability and its capability to withstand high surface pressures. This may lead to uncontrolled and irreversible loss of lipids from the surface.

Effect of the Incorporation of Nanosized Titanium Dioxide on the Interfacial Properties of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

The effect of the incorporation of hydrophilic titanium dioxide (TiO₂) nanoparticles on the interfacial properties of Langmuir monolayers of 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC) has been evaluated combining interfacial thermodynamic studies, dilatational rheology, and Brewster angle microscopy (BAM). The results show that the TiO₂ nanoparticles are able to penetrate DPPC layers, modifying the organization of the molecules and, consequently, the phase behavior and viscoelastic properties of the systems. Measurements of dilational viscoelasticity against the frequency have been performed, using the oscillatory barrier method, at different values of the surface pressure corresponding to different degrees of compression of the monolayer. The presence of TiO₂ nanoparticles also affects the dynamic response of the monolayer modifying both the quasi-equilibrium dilatational elasticity and the high frequency limit of the viscoelastic modulus. The principal aim of this work is to understand the fundamental physicochemical bases related to the incorporation of specific nanoparticles of technological interest into the interfacial layer with biological relevance such as phospholipid layers. This can provide information on potential adverse effects of nanoparticles for health and the environment.

The role of multilayers in preventing the premature buckling of the pulmonary surfactant

The pulmonary surfactant is a protein-lipid mixture that spreads into a film at the air-lung interface. The highly-compacted molecules of the film keep the interface from shrinking under the influence of otherwise high surface tension and thus prevent atelectasis. We have previously shown that for the film to withstand a high film pressure without collapsing it needs to assume a specific architecture of a molecular monolayer with islands of stacks of molecular multilayers scattered over the area. Surface activity was assessed in a captive bubble surfactometer (CBS) and the role of cholesterol and oxidation on surfactant function examined. The surfactant film was conceptualized as a plate under pressure. Finite element analysis was used to evaluate the role of the multilayer stacks in preventing buckling of the plate during compression. The model of film topography was constructed from atomic force microscope (AFM) scans of surfactant films and known physical properties of dipalmitoylphosphatidylcholine (DPPC), a major constituent of surfactant, using ANSYS structural-analysis software. We report that multilayer structures increase film stability. In simulation studies, the critical load required to induce surfactant film buckling increased about two-fold in the presence of multilayers. Our in vitro surfactant studies showed that surface topography varied between functional and dysfunctional films. However, the critical factor for film stability was the anchoring of the multilayers. Furthermore, the anchoring of multilayers and mechanical stability of the film was dependent on the presence of hydrophobic surfactant protein-C. The current study expands our understanding of the mechanism of surfactant inactivation in disease.

Computer simulations of lung surfactant

Lung surfactant lines the gas-exchange interface in the lungs and reduces the surface tension, which is necessary for breathing. Lung surfactant consists mainly of lipids with a small amount of proteins and forms a monolayer at the air-water interface connected to bilayer reservoirs. Lung surfactant function involves transfer of material between the monolayer and bilayers during the breathing cycle. Lipids and proteins are organized laterally in the monolayer; selected species are possibly preferentially transferred to bilayers. The complex 3D structure of lung surfactant and the exact roles of lipid organization and proteins remain important goals for research. We review recent simulation studies on the properties of lipid monolayers, monolayers with phase coexistence, monolayer-bilayer transformations, lipid-protein interactions, and effects of nanoparticles on lung surfactant. This article is part of a Special Issue entitled: Biosimulations edited by Ilpo Vattulainen and Tomasz Róg.

C₆₀ fullerene promotes lung monolayer collapse

Airborne nanometre-sized pollutants are responsible for various respiratory diseases. Such pollutants can reach the gas-exchange surface in the alveoli, which is lined with a monolayer of lung surfactant. The relationship between physiological effects of pollutants and molecular-level interactions is largely unknown. Here, we determine the effects of carbon nanoparticles on the properties of a model of lung monolayer using molecular simulations. We simulate phase-separated lipid monolayers in the presence of a model pollutant nanoparticle, C₆₀ fullerene. In the absence of nanoparticles, the monolayers collapse only at very low surface tensions (around 0 mN m(-1)). In the presence of nanoparticles, instead, monolayer collapse is observed at significantly higher surface tensions (up to ca 10 mN m(-1)). Collapse at higher tensions is related to lower mechanical rigidity of the monolayer. It is possible that similar mechanisms operate on lung surfactant in vivo, which suggests that health effects of airborne carbon nanoparticles may be mediated by alterations of the mechanical properties of lung surfactant.

The mechanism of collapse of heterogeneous lipid monolayers

Collapse of homogeneous lipid monolayers is known to proceed via wrinkling/buckling, followed by folding into bilayers in water. For heterogeneous monolayers with phase coexistence, the mechanism of collapse remains unclear. Here, we investigated collapse of lipid monolayers with coexisting liquid-liquid and liquid-solid domains using molecular dynamics simulations. The MARTINI coarse-grained model was employed to simulate monolayers of ∼80 nm in lateral dimension for 10-25 μs. The monolayer minimum surface tension decreased in the presence of solid domains, especially if they percolated. Liquid-ordered domains facilitated monolayer collapse due to the spontaneous curvature induced at a high cholesterol concentration. Upon collapse, bilayer folds formed in the liquid (disordered) phase; curved domains shifted the nucleation sites toward the phase boundary. The liquid (disordered) phase was preferentially transferred into bilayers, in agreement with the squeeze-out hypothesis. As a result, the composition and phase distribution were altered in the monolayer in equilibrium with bilayers compared to a flat monolayer at the same surface tension. The composition and phase behavior of the bilayers depended on the degree of monolayer compression. The monolayer-bilayer connection region was enriched in unsaturated lipids. Percolation of solid domains slowed down monolayer collapse by several orders of magnitude. These results are important for understanding the mechanism of two-to-three-dimensional transformations in heterogeneous thin films and the role of lateral organization in biological membranes. The study is directly relevant for the function of lung surfactant, and can explain the role of nanodomains in its surface activity and inhibition by an increased cholesterol concentration.

Composition, structure and mechanical properties define performance of pulmonary surfactant membranes and films

The respiratory surface in the mammalian lung is stabilized by pulmonary surfactant, a membrane-based system composed of multiple lipids and specific proteins, the primary function of which is to minimize the surface tension at the alveolar air-liquid interface, optimizing the mechanics of breathing and avoiding alveolar collapse, especially at the end of expiration. The goal of the present review is to summarize current knowledge regarding the structure, lipid-protein interactions and mechanical features of surfactant membranes and films and how these properties correlate with surfactant biological function inside the lungs. Surfactant mechanical properties can be severely compromised by different agents, which lead to surfactant inhibition and ultimately contributes to the development of pulmonary disorders and pathologies in newborns, children and adults. A detailed comprehension of the unique mechanical and rheological properties of surfactant layers is crucial for the diagnostics and treatment of lung diseases, either by analyzing the contribution of surfactant impairment to the pathophysiology or by improving the formulations in surfactant replacement therapies. Finally, a short review is also included on the most relevant experimental techniques currently employed to evaluate lung surfactant mechanics, rheology, and inhibition and reactivation processes.

Segregated ordered lipid phases and protein-promoted membrane cohesivity are required for pulmonary surfactant films to stabilize and protect the respiratory surface

Pulmonary surfactant is a lipid-protein complex essential to stabilize alveoli, by forming surface active films able to reach and sustain very low surface tensions (< 2 mN m(-1)) during the film compression that occurs at end-expiration. The particular lipid composition of surfactant, including a high proportion of dipalmitoylphosphatidylcholine (DPPC), induces segregation of fluid ordered and disordered phases in surfactant membranes and films at physiological temperatures. The segregation of DPPC-enriched ordered phase has been related with the ability of surfactant films to produce very low tensions, while the presence in surfactant of two specific hydrophobic polypeptides, SP-B and SP-C, is absolutely required to facilitate surfactant dynamics, including film formation and re-spreading during expansion at inspiration. In the present study, we have used X-ray scattering to analyze the structure of (1) whole native surfactant membranes purified from porcine lungs, (2) membranes reconstituted from the organic extract of surfactant containing the full lipid complement and the physiological proportion of SP-B and SP-C, and (3) membranes reconstituted from the lipid fraction of surfactant depleted of proteins. Small angle X-ray scattering data from whole surfactant or from membranes reconstituted from surfactant organic extract indicated the co-existence of two lamellar phases with different thicknesses. Such phase coexistence disappeared upon heating of the samples at temperatures above physiological values. When assessed in a captive bubble surfactometer, which mimics interfacial compression-expansion dynamics, the ability of surfactant films to produce very low tensions is only maintained at temperatures permitting the coexistence of the two lamellar phases. On the other hand, membranes reconstituted in the absence of proteins produced diffractograms indicative of the existence of a single dominant lamellar phase at all temperatures. These data suggest that SP-B and SP-C establish membrane-membrane interactions coupling the stacks of different segregated phases. The low compressibility of surfactant films that leads to the maximal pressures (minimal tensions) is supported on one hand by the highly packed solid-like character of segregated DPPC-enriched domains and, on the other hand, by a high cohesivity of multilayered structures promoted by hydrophoblic surfactant proteins, in particular SP-B, at the more dynamic disordered membrane regions, in which SP-B selectively partitions. Cryo-electron microscopy has shown that SP-B induces formation of tight membrane-membrane contacts, a finding that supports our inference concerning the role of these surfactant proteins.

Pulmonary Surfactant and its in vitro Assessment Using Axisymmetric Drop Shape Analysis (ADSA): A Review

Recent progress in the study of pulmonary surfactant is reviewed. The first half of this paper provides general background in both physiological and clinical perspectives. The second half focuses on the in vitro assessment of pulmonary surfactant using methods based on a drop shape technique, Axisymmetric Drop Shape Analysis (ADSA). Theories, experiments, and techniques of image analysis used in these ADSA methods are briefly described. Typical applications of these methods are discussed in detail. It is concluded that the accuracy, versatility, and simplicity of these ADSA methods render them suitable to the study of pulmonary surfactant.

Role of lipid ordered/disordered phase coexistence in pulmonary surfactant function

The respiratory epithelium has evolved to produce a complicated network of extracellular membranes that are essential for breathing and, ultimately, survival. Surfactant membranes form a stable monolayer at the air-liquid interface with bilayer structures attached to it. By reducing the surface tension at the air-liquid interface, surfactant stabilizes the lung against collapse and facilitates inflation. The special composition of surfactant membranes results in the coexistence of two distinct micrometer-sized ordered/disordered phases maintained up to physiological temperatures. Phase coexistence might facilitate monolayer folding to form three-dimensional structures during exhalation and hence allow the film to attain minimal surface tension. These folded structures may act as a membrane reserve and attenuate the increase in membrane tension during inspiration. The present review summarizes what is known of ordered/disordered lipid phase coexistence in lung surfactant, paying attention to the possible role played by domain boundaries in the monolayer-to-multilayer transition, and the correlations of biophysical inactivation of pulmonary surfactant with alterations in phase coexistence.

Influence of hydrophobic alkylated gold nanoparticles on the phase behavior of monolayers of DPPC and clinical lung surfactant

The effect of hydrophobic alkylated gold nanoparticles (Au NPs) on the phase behavior and structure of Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) and Survanta, a naturally derived commercial pulmonary surfactant that contains DPPC as the main lipid component and hydrophobic surfactant proteins SP-B and SP-C, has been investigated in connection with the potential implication of inorganic NPs in pulmonary surfactant dysfunction. Hexadecanethiolate-capped Au NPs (C(16)SAu NPs) with an average core diameter of 2 nm have been incorporated into DPPC monolayers in concentrations ranging from 0.1 to 0.5 mol %. Concentrations of up to 0.2 mol % in DPPC and 16 wt % in Survanta do not affect the monolayer phase behavior at 20 °C, as evidenced by surface pressure-area (π-A) and ellipsometric isotherms. The monolayer structure at the air/water interface was imaged as a function of the surface pressure by Brewster angle microscopy (BAM). In the liquid-expanded/liquid-condensed phase coexistence region of DPPC, the presence of 0.2 mol % C(16)SAu NPs causes the formation of many small, circular, condensed lipid domains, in contrast to the characteristic larger multilobes formed by pure lipid. Condensed domains of similar size and shape to those of DPPC with 0.2 mol % C(16)SAu NPs are formed by compressing Survanta, and these are not affected by the C(16)SAu NPs. Atomic force microscopy images of Langmuir-Schaefer-deposited films support the BAM observations and reveal, moreover, that at high surface pressures (i.e., 35 and 45 mN m(-1)) the C(16)SAu NPs form honeycomb-like aggregates around the polygonal condensed DPPC domains. In the Survanta monolayers, the C(16)SAu NPs were found to accumulate together with the proteins in the liquid-expanded phase around the circular condensed lipid domains. In conclusion, the presence of hydrophobic C(16)SAu NPs in amounts that do not influence the π-A isotherm alters the nucleation, growth, and morphology of the condensed domains in monolayers of DPPC but not of those of Survanta. Systematic investigations of the effect of the interaction of chemically defined NPs with the lipid and protein components of lung surfactant on the physicochemical properties of surfactant films are pertinent to understanding how inhaled NPs impact pulmonary function.

Lung surfactant protein SP-B promotes formation of bilayer reservoirs from monolayer and lipid transfer between the interface and subphase

We investigated the possible role of SP-B proteins in the function of lung surfactant. To this end, lipid monolayers at the air/water interface, bilayers in water, and transformations between them in the presence of SP-B were simulated. The proteins attached bilayers to monolayers, providing close proximity of the reservoirs with the interface. In the attached aggregates, SP-B mediated establishment of the lipid-lined connection similar to the hemifusion stalk. Via this connection, a lipid flow was initiated between the monolayer at the interface and the bilayer in water in a surface-tension-dependent manner. On interface expansion, the flow of lipids to the monolayer restored the surface tension to the equilibrium spreading value. SP-B induced formation of bilayer folds from the monolayer at positive surface tensions below the equilibrium. In the absence of proteins, lipid monolayers were stable at these conditions. Fold nucleation was initiated by SP-B from the liquid-expanded monolayer phase by local bending, and the proteins lined the curved perimeter of the growing fold. No effect on the liquid-condensed phase was observed. Covalently linked dimers resulted in faster kinetics for monolayer folding. The simulation results are in line with existing hypotheses on SP-B activity in lung surfactant and explain its molecular mechanism.

Combined and independent action of proteins SP-B and SP-C in the surface behavior and mechanical stability of pulmonary surfactant films

The hydrophobic proteins SP-B and SP-C are essential for pulmonary surfactant function, even though they are a relatively minor component (<2% of surfactant dry mass). Despite countless studies, their specific differential action and their possible concerted role to optimize the surface properties of surfactant films have not been completely elucidated. Under conditions kept as physiologically relevant as possible, we tested the surface activity and mechanical stability of several surfactant films of varying protein composition in vitro using a captive bubble surfactometer and a novel (to our knowledge) stability test. We found that in the naturally derived surfactant lipid mixtures, surfactant protein SP-B promoted film formation and reextension to lower surface tensions than SP-C, and in particular played a vital role in sustaining film stability at the most compressed states, whereas SP-C produced no stabilization. Preparations containing both proteins together revealed a slight combined effect in enhancing film formation. These results provide a qualitative and quantitative framework for the development of future synthetic therapeutic surfactants, and illustrate the crucial need to include SP-B or an efficient SP-B analog for optimal function.

Myristate is selectively incorporated into surfactant and decreases dipalmitoylphosphatidylcholine without functional impairment

Lung surfactant mainly comprises phosphatidylcholines (PC), together with phosphatidylglycerols and surfactant proteins SP-A to SP-D. Dipalmitoyl-PC (PC16:0/16:0), palmitoylmyristoyl-PC (PC16:0/14:0), and palmitoylpalmitoleoyl-PC (PC16:0/16:1) together comprise 75–80% of surfactant PC. During alveolarization, which occurs postnatally in the rat, PC16:0/14:0 reversibly increases at the expense of PC16:0/16:0. As lipoproteins modify surfactant metabolism, we postulated an extrapulmonary origin of PC16:0/14:0 enrichment in surfactant. We, therefore, fed rats (d19–26) with trilaurin (C12:03), trimyristin (C14:03), tripalmitin (C16:03), triolein (C18:13) or trilinolein (C18:23) vs. carbohydrate diet to assess their effects on surfactant PC composition and surface tension function using a captive bubble surfactometer. Metabolism was assessed with deuterated C12:0 (ω-d3-C12:0) and ω-d3-C14:0. C14:03 increased PC16:0/14:0 in surfactant from 12 ± 1 to 45 ± 3% and decreased PC16:0/16:0 from 47 ± 1 to 29 ± 2%, with no impairment of surface tension function. Combined phospholipase A2 assay and mass spectrometry revealed that 50% of the PC16:0/14:0 peak comprised its isomer 1-myristoyl-2-palmitoyl-PC (PC14:0/16:0). While C12:03 was excluded from incorporation into PC, it increased PC16:0/14:0 as well. C16:03, C18:13, and C18:23 had no significant effect on PC16:0/16:0 or PC16:0/14:0. d3-C14:0 was enriched in lung PC, either via direct supply or via d3-C12:0 elongation. Enrichment of d3-C14:0 in surfactant PC contrasted its rapid turnover in plasma and liver PC, where its elongation product d3-C16:0 surmounted d3-C14:0. In summary, high surfactant PC16:0/14:0 during lung development correlates with C14:0 and C12:0 supply via specific C14:0 enrichment into lung PC. Surfactant that is high in PC16:0/14:0 but low in PC16:0/16:0 is compatible with normal respiration and surfactant function in vitro.

The biophysical function of pulmonary surfactant

Pulmonary surfactant lowers surface tension in the lungs. Physiological studies indicate two key aspects of this function: that the surfactant film forms rapidly; and that when compressed by the shrinking alveolar area during exhalation, the film reduces surface tension to very low values. These observations suggest that surfactant vesicles adsorb quickly, and that during compression, the adsorbed film resists the tendency to collapse from the interface to form a 3D bulk phase. Available evidence suggests that adsorption occurs by way of a rate-limiting structure that bridges the gap between the vesicle and the interface, and that the adsorbed film avoids collapse by undergoing a process of solidification. Current models, although incomplete, suggest mechanisms that would partially explain both rapid adsorption and resistance to collapse as well as how different constituents of pulmonary surfactant might affect its behavior.

Atomic force microscopy studies of functional and dysfunctional pulmonary surfactant films, II: albumin-inhibited pulmonary surfactant films and the effect of SP-A

Pulmonary surfactant (PS) dysfunction because of the leakage of serum proteins into the alveolar space could be an operative pathogenesis in acute respiratory distress syndrome. Albumin-inhibited PS is a commonly used in vitro model for studying surfactant abnormality in acute respiratory distress syndrome. However, the mechanism by which PS is inhibited by albumin remains controversial. This study investigated the film organization of albumin-inhibited bovine lipid extract surfactant (BLES) with and without surfactant protein A (SP-A), using atomic force microscopy. The BLES and albumin (1:4 w/w) were cospread at an air-water interface from aqueous media. Cospreading minimized the adsorption barrier for phospholipid vesicles imposed by preadsorbed albumin molecules, i.e., inhibition because of competitive adsorption. Atomic force microscopy revealed distinct variations in film organization, persisting up to 40 mN/m, compared with pure BLES monolayers. Fluorescence confocal microscopy confirmed that albumin remained within the liquid-expanded phase of the monolayer at surface pressures higher than the equilibrium surface pressure of albumin. The remaining albumin mixed with the BLES monolayer so as to increase film compressibility. Such an inhibitory effect could not be relieved by repeated compression-expansion cycles or by adding surfactant protein A. These experimental data indicate a new mechanism of surfactant inhibition by serum proteins, complementing the traditional competitive adsorption mechanism.

Comparing experimental and simulated pressure-area isotherms for DPPC

Although pressure-area isotherms are commonly measured for lipid monolayers, it is not always appreciated how much they can vary depending on experimental factors. Here, we compare experimental and simulated pressure-area isotherms for dipalmitoylphosphatidylcholine (DPPC) at temperatures ranging between 293.15 K and 323.15 K, and explore possible factors influencing the shape and position of the isotherms. Molecular dynamics simulations of DPPC monolayers using both coarse-grained (CG) and atomistic models yield results that are in rough agreement with some of the experimental isotherms, but with a steeper slope in the liquid-condensed region than seen experimentally and shifted to larger areas. The CG lipid model gives predictions that are very close to those of atomistic simulations, while greatly improving computational efficiency. There is much more variation among experimental isotherms than between isotherms obtained from CG simulations and from the most refined simulation available. Both atomistic and CG simulations yield liquid-condensed and liquid-expanded phase area compressibility moduli that are significantly larger than those typically measured experimentally, but compare well with some experimental values obtained under rapid compression.

Current perspectives in pulmonary surfactant--inhibition, enhancement and evaluation

Pulmonary surfactant (PS) is a complicated mixture of approximately 90% lipids and 10% proteins. It plays an important role in maintaining normal respiratory mechanics by reducing alveolar surface tension to near-zero values. Supplementing exogenous surfactant to newborns suffering from respiratory distress syndrome (RDS), a leading cause of perinatal mortality, has completely altered neonatal care in industrialized countries. Surfactant therapy has also been applied to the acute respiratory distress syndrome (ARDS) but with only limited success. Biophysical studies suggest that surfactant inhibition is partially responsible for this unsatisfactory performance. This paper reviews the biophysical properties of functional and dysfunctional PS. The biophysical properties of PS are further limited to surface activity, i.e., properties related to highly dynamic and very low surface tensions. Three main perspectives are reviewed. (1) How does PS permit both rapid adsorption and the ability to reach very low surface tensions? (2) How is PS inactivated by different inhibitory substances and how can this inhibition be counteracted? A recent research focus of using water-soluble polymers as additives to enhance the surface activity of clinical PS and to overcome inhibition is extensively discussed. (3) Which in vivo, in situ, and in vitro methods are available for evaluating the surface activity of PS and what are their relative merits? A better understanding of the biophysical properties of functional and dysfunctional PS is important for the further development of surfactant therapy, especially for its potential application in ARDS.

Structural characterization of the monolayer-multilayer transition in a pulmonary surfactant model: IR studies of films transferred at continuously varying surface pressures

The four-component system acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC)/1,2-dipalmitoylphosphatidylglycerol/ (DPPG)/pulmonary surfactant protein SP-C/cholesterol provides a useful model for in vitro biophysical studies of the reversible monolayer to multilayer transition that occurs during compression <--> expansion cycles in the lung. Monolayer films of this mixture (with chain perdeuterated DPPC-d62) at the air/water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP (continuously varying surface pressures) (Langmuir 2007, 23, 4958). The thermodynamic properties of the Langmuir films have been examined with pressure-area isotherms, while the molecular properties of the film constituents in the transferred films in the monolayer and multilayer phases have been examined with IR spectroscopy. Quantitative intensity measurements of the DPPC-d62, DPPG, and SP-C components in each phase reveal that the DPPG and SP-C constituents are relatively enriched in the multilayer compared with the DPPC-d62, although all three species are present in both phases. Some molecular structure information is available from the surface-pressure-induced variation in IR parameters. The DPPC-d62 exhibits slightly increased conformational order in the multilayer phase as detected from decreases in the CD2 stretching frequencies upon compression, while the lipid phosphate residues become dehydrated, as deduced from increases in the 1245 cm-1 symmetric PO2- stretching frequency. A small increase is observed in the protein amide I frequency; possible interpretations of these changes are presented. The current observations are compared with ideas contained in the "squeeze-out hypothesis" (Handbook of Physiology, The Respiratory System; American Physiological Society Press: Bethesda, MD, 1986; Vol. III, p 247) and in the "liquid crystalline collapse" model (Biophys. J. 2003, 84, 3792). Within the limitation of the current procedures, the data contain elements from both these descriptions of the monolayer transformation. Extensions and possible limitations of the COVASP-IR method are discussed.

Atomic force microscopy studies of functional and dysfunctional pulmonary surfactant films. I. Micro- and nanostructures of functional pulmonary surfactant films and the effect of SP-A

Monolayers of a functional pulmonary surfactant (PS) can reach very low surface tensions well below their equilibrium value. The mechanism by which PS monolayers reach such low surface tensions and maintain film stability remains unknown. As shown previously by fluorescence microscopy, phospholipid phase transition and separation seem to be important for the normal biophysical properties of PS. This work studied phospholipid phase transitions and separations in monolayers of bovine lipid extract surfactant using atomic force microscopy. Atomic force microscopy showed phospholipid phase separation on film compression and a monolayer-to-multilayer transition at surface pressure 40-50 mN/m. The tilted-condensed phase consisted of domains not only on the micrometer scale, as detected previously by fluorescence microscopy, but also on the nanometer scale, which is below the resolution limits of conventional optical methods. The nanodomains were embedded uniformly within the liquid-expanded phase. On compression, the microdomains broke up into nanodomains, thereby appearing to contribute to tilted-condensed and liquid-expanded phase remixing. Addition of surfactant protein A altered primarily the nanodomains and promoted the formation of multilayers. We conclude that the nanodomains play a predominant role in affecting the biophysical properties of PS monolayers and the monolayer-to-multilayer transition.

The molecular mechanism of monolayer-bilayer transformations of lung surfactant from molecular dynamics simulations

The aqueous lining of the lung surface exposed to the air is covered by lung surfactant, a film consisting of lipid and protein components. The main function of lung surfactant is to reduce the surface tension of the air-water interface to the low values necessary for breathing. This function requires the exchange of material between the lipid monolayer at the interface and lipid reservoirs under dynamic compression and expansion of the interface during the breathing cycle. We simulated the reversible exchange of material between the monolayer and lipid reservoirs under compression and expansion of the interface. We used a mixture of dipalmitoyl-phosphatidylcholine, palmitoyl-oleoyl-phosphatidylglycerol, cholesterol, and surfactant-associated protein C as a functional analog of mammalian lung surfactant. In our simulations, the monolayer collapses into the water subphase on compression and forms bilayer folds. On monolayer reexpansion, the material is transferred from the folds back to the interface. The simulations indicate that the connectivity of the bilayer aggregates to the monolayer is necessary for the reversibility of the monolayer-bilayer transformation. The simulations also show that bilayer aggregates are unstable in the air subphase and stable in the water subphase.

Solubility versus electrostatics: what determines lipid/protein interaction in lung surfactant

Mammalian lung surfactant is a complex lipid/protein mixture covering the alveolar interface and has the crucial function of reducing the surface tension at this boundary to minimal values. Surfactant protein SP-B plays an important role for this purpose and was the focus of many recent studies. However, the specificity of lipid/SP-B interactions is controversial. Since these investigations were accomplished at varying pH conditions (pH 5.5 and 7.0), we studied the specificity of these interactions in a dipalmitoylphosphatidylcholine (DPPC)/dipalmitoylphosphatidylglycerol (DPPG)/SP-B (4:1:0.2 mol %) model system at either pH. Mainly fluorescence microscopy and laterally resolved time-of-flight secondary ion mass spectrometry were used to reveal information about the phase behavior of the lipids and the molecular distribution of SP-B in the lipid mixture. DPPG forms separated condensed domains due to a strong hydrogen-bond network, from which the protein is mainly excluded. Considering the protein as an impurity of the lipid mixture leads to the principle of the zone melting process: an impurity is highly more soluble in a liquid phase than in a solid phase. The phase behavior effect of the lipids mainly outperforms the electrostatic interactions between DPPG and SP-B, leading to a more passively achieved colocalization of DPPC and SP-B.

New insights into lung surfactant monolayers using vibrational sum frequency generation spectroscopy

At the air-water interface, interfacial molecular structure, intermolecular interactions, film relaxation and film respreading of model lung surfactant monolayers were studied using vibrational sum frequency generation (VSFG) spectroscopy combined with a Langmuir film balance. Chain-perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoyl-phosphatidylglycerol (POPG), palmitic acid (PA) and tripalmitin were investigated. In the DPPC-d62-PA binary monolayer, PA showed a condensing effect on the DPPC chains. On the contrary, in the DPPC-d62-POPG binary monolayer, POPG showed a fluidizing effect on the DPPC chains. In the ternary monolayer system of DPPC-d62-POPG-PA, the balance between the fluidizing and the condensing effect was also observed. In addition, the film relaxation behavior of DPPC-d62 and the enhanced film stability of DPPC-d62 caused by the addition of tripalmitin were observed. Real-time VSFG was also employed to study the respreading properties of a complex lung surfactant mixture containing DPPC-d62, POPG, PA and KL4 (a mimic of SP-B) peptide, which revealed DPPC enrichment after film compression.

Biochemical and pharmacological differences between preparations of exogenous natural surfactant used to treat Respiratory Distress Syndrome: role of the different components in an efficient pulmonary surfactant

The pharmaceutical application of exogenous natural pulmonary surfactant preparations has shown its efficiency in the therapeutical treatment of infants with Respiratory Distress Syndrome. At the same time, the use of these preparations in patients with Acute Respiratory Distress Syndrome, although not still an effective therapy, shows promising results. The analysis of composition, structure and surface activity of some of the different natural surfactant preparations available today for clinical use reveals important differences, a fact that opens horizons in the optimization of new effective formulations in the treatment of the Acute Respiratory Distress Syndrome. The purpose of this review is to carry out an updating of the current models interpreting the role of the main components of pulmonary surfactant as a reference to evaluate the biochemical composition of the preparations of exogenous natural pulmonary surfactant currently in use and their apparent pharmacological effect.

Effect of compressed bovine lipid extract surfactant films on oxygen transfer

In the lungs, oxygen transfer from the inspired air to the capillary blood needs to cross the surfactant lining layer of the alveoli. Therefore, the gas transfer characteristics of lung surfactant film are of fundamental physiological interest. However, previous in vitro studies-most relied on the Langmuir-type balance-fail to cover the low surface tension range (i.e., less than the equilibrium surface tension of approximately 25 mJ/m2) due to film leakage. We have recently developed a novel in vitro experimental strategy, the combination of axisymmetric drop shape analysis and captive bubble technique (ADSA-CB), in studying the effect of surfactant films on interfacial gas transfer (Langmuir 2005, 21, 5446). In the present work, ADSA-CB is used as a micro-film-balance to study the effect of compressed bovine lipid extract surfactant (BLES) films on oxygen transfer. A low surface tension ranging from approximately 25 mJ/m2 to 2 mJ/m2 is studied. The experimental results suggest that lung surfactant films at a low surface tension near 2 mJ/m2 provide resistance to oxygen transfer, as indicated by a decrease of 30-50% in the mass transfer coefficient (kL) of oxygen in BLES suspensions with respect to water. At higher surface tension (i.e., >6 mJ/m2), the resistance to oxygen transfer is only modest, i.e., the decrease in kL is less than 20% compared to water. The experimental results suggest that lung surfactant plays a role in oxygen transfer in the pulmonary system.

Real-time investigation of lung surfactant respreading with surface vibrational spectroscopy

The respreading of a lung surfactant monolayer at the air-water interface is investigated with broad bandwidth sum frequency generation (BBSFG) spectroscopy. The lung surfactant mixture contains chain perdeuterated dipalmitoylphosphatidylcholine (DPPC-d62), palmitoyloleoylphosphatidylglycerol (POPG), palmitic acid (PA), and KL4 (a 21-residue polypeptide analogue to the surfactant protein SP-B). DPPC-d62 serves as a probe molecule for the spectroscopic investigation. The BBSFG spectra of DPPC-d62 in the lung surfactant mixture are obtained in the C-D stretching region in real-time during film compression and expansion in a Langmuir trough. The BBSFG intensity of the CD3 stretch peak from DPPC-d62 terminal methyl groups is used as a measure of the interfacial density of DPPC-d62 after careful consideration of orientation effects. For the first time, the interfacial loss of DPPC in a complex lung surfactant mixture is quantified. Spectroscopic results reveal that there is an 18% DPPC-d62 interfacial loss during film respreading. However, the surface pressure-area isotherm measurements demonstrate that there is a rather large trough area reduction (37%) during film expansion. The relatively small interfacial loss of DPPC-d62 and the rather large trough area reduction indicate that the respreading of DPPC and non-DPPC components in the lung surfactant is not uniform and a surface refinement process exists during film compression and expansion. This refinement process results in a DPPC-enriched monolayer with a significant depletion of non-DPPC components after film respreading. Implication for replacement surfactant design from this work is discussed.

Effect of humidity on the stability of lung surfactant films adsorbed at air–water interfaces

The effect of humidity on the film stability of Bovine Lipid Extract Surfactant (BLES) is studied using the captive bubble method. It is found that adsorbed BLES films show distinctly different stability patterns at two extreme relative humidities (RHs), i.e., bubbles formed by ambient air and by air prehumidified to 100% RH at 37 degrees C. The differences are illustrated by the ability to maintain low surface tensions at various compression ratios, the behavior of bubble clicks, and film compressibility. These results suggest that 100% RH at 37 degrees C tends to destabilize the BLES films. In turn, the experimental results indicate that the rapidly adsorbed BLES film on a captive bubble presents a barrier to water transport that retards full humidification of the bubble when ambient air is used for bubble formation. These findings necessitate careful evaluation and maintenance of environmental humidity for all in vitro assessment of lung surfactants. It is also found that the stability of adsorbed bovine natural lung surfactant (NLS) films is not as sensitive as BLES films to high humidity. This may indicate a physiological function of SP-A and/or cholesterol, which are absent in BLES, in maintaining the extraordinary film stability in vivo.

Mode of interaction of hydrophobic amphiphilic alpha-helical peptide/dipalmitoylphosphatidylcholine with phosphatidylglycerol or palmitic acid at the air-water interface

Surface pressure (pi)-, surface potential (DeltaV)-, dipole moment (mu( perpendicular))-area (A) isotherms and morphological behavior at the air-water interface were obtained for multicomponent monolayers of two different systems for dipalmitoylphosphatidylcholine (DPPC)/egg-phosphatidylglycerol (PG) (= 68:22, by weight)/Hel 13-5 and DPPC/palmitic acid (PA) (= 90:9, by weight)/Hel 13-5 (Hel 13-5 is a newly designed 18-mer amphiphilic alpha-helical peptide with 13 hydrophobic and 5 hydrophilic amino acid residues). The phase behavior of these model systems was investigated on a subsolution of 0.02 M tris(hydroxymethyl)aminomethane (Tris) buffer (pH 8.4) with 0.13 M NaCl at 298.2 K by employing the Wilhelmy method, the ionizing electrode method, and fluorescence microscopy. Especially, the present study focuses on the interfacial effect of the addition of Hel 13-5 on two binary systems, DPPC/egg-PG and DPPC/PA monolayers, as the substitute for pulmonary surfactant proteins, and on the respective roles of PG and PA for the monolayers in the three-component systems. Constant kink points ( approximately 42 mN m(-1)) clearly appear on the pi-A isotherms, independent of the compositions in the ternary systems, which corresponds to the Hel 13-5 collapse pressure similar to that of SP-B and SP-C as functions in multicomponent monolayers. This implies that Hel 13-5 is squeezed out of ternary monolayers above approximately 42 mN m(-1), resulting in two- to three-dimensional phase transformation. Furthermore, Langmuir isotherms clearly show that Hel 13-5 with egg-PG is squeezed out of the DPPC/egg-PG/Hel 13-5 system, whereas only Hel 13-5 is squeezed out of the DPPC/PA/Hel 13-5 system. Cyclic compression and expansion isotherms of these systems were carried out to confirm the spreading and respreading capacities. In addition, the interfacial behavior of the ternary mixtures has been analyzed by the additivity rule. Morphological examinations and comparisons have verified the interactions of Hel 13-5 with the representative miscible mixture (DPPC/PA system) by fluorescence microscopy. Consequently, distinct morphological variations corresponding to the squeeze-out behavior are observed as a fluorescent contrast recovery. Herein, a new mechanism of the refluorescent phenomenon is proposed by varying the surface composition of Hel 13-5.

DPPC Langmuir monolayer at the air-water interface: probing the tail and head groups by vibrational sum frequency generation spectroscopy

Dipalmitoylphosphatidylcholine (DPPC) is the predominant lipid component in lung surfactant. In this study, the Langmuir monolayer of deuterated dipalmitoylphosphatidylcholine (DPPC-d62) in the liquid-expanded (LE) phase and the liquid-condensed (LC) phase has been investigated at the air-water interface with broad bandwidth sum frequency generation (BBSFG) spectroscopy combined with a Langmuir film balance. Four moieties of the DPPC molecule are probed by BBSFG: the terminal methyl (CD3) groups of the tails, the methylene (CD2) groups of the tails, the choline methyls (CH3) in the headgroup, and the phosphate in the headgroup. BBSFG spectra of the four DPPC moieties provide information about chain conformation, chain orientation, headgroup orientation, and headgroup hydration. These results provide a comprehensive picture of the DPPC phase behavior at the air-water interface. In the LE phase, the DPPC hydrocarbon chains are conformationally disordered with a significant number of gauche configurations. In the LC phase, the hydrocarbon chains are in an all-trans conformation and are tilted from the surface normal by 25 degrees. In addition, the orientations of the tail terminal methyl groups are found to remain nearly unchanged with the variation of surface area. Qualitative analysis of the BBSFG spectra of the choline methyl groups suggests that these methyl groups are tilted but lie somewhat parallel to the surface plane in both the LE and LC phases. The dehydration of the phosphate headgroup due to the LE-LC phase transition is observed through the frequency blue shift of the phosphate symmetric stretch in the fingerprint region. In addition, implications for lung surfactant function from this work are discussed.

Physical properties and surface activity of surfactant-like membranes containing the cationic and hydrophobic peptide KL4

Surfactant-like membranes containing the 21-residue peptide KLLLLKLLLLKLLLLKLLLLK (KL4), have been clinically tested as a therapeutic agent for respiratory distress syndrome in premature infants. The aims of this study were to investigate the interactions between the KL4 peptide and lipid bilayers, and the role of both the lipid composition and KL4 structure on the surface adsorption activity of KL4-containing membranes. We used bilayers of three-component systems [1,2-dipalmitoyl-phosphatidylcholine/1-palmitoyl-2-oleoyl-phosphatidylglycerol/palmitic acid (DPPC/POPG/PA) and DPPC/1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/PA] and binary lipid mixtures of DPPC/POPG and DPPC/PA to examine the specific interaction of KL4 with POPG and PA. We found that, at low peptide concentrations, KL4 adopted a predominantly alpha-helical secondary structure in POPG- or POPC-containing membranes, and a beta-sheet structure in DPPC/PA vesicles. As the concentration of the peptide increased, KL4 interconverted to a beta-sheet structure in DPPC/POPG/PA or DPPC/POPC/PA vesicles. Ca2+ favored alpha<-->beta interconversion. This conformational flexibility of KL4 did not influence the surface adsorption activity of KL4-containing vesicles. KL4 showed a concentration-dependent ordering effect on POPG- and POPC-containing membranes, which could be linked to its surface activity. In addition, we found that the physical state of the membrane had a critical role in the surface adsorption process. Our results indicate that the most rapid surface adsorption takes place with vesicles showing well-defined solid/fluid phase co-existence at temperatures below their gel to fluid phase transition temperature, such as those of DPPC/POPG/PA and DPPC/POPC/PA. In contrast, more fluid (DPPC/POPG) or excessively rigid (DPPC/PA) KL4-containing membranes fail in their ability to adsorb rapidly onto and spread at the air-water interface.

Lung-surfactant-meconium interaction: in vitro study in bulk and at the air-solution interface

Lung surfactants (LSs) form a monolayer at the lung's alveoli air-solution interface and play a crucial role in making normal breathing possible by reducing the surface tension. LS are affected by various agents that hamper their normal functioning. Tobacco smoke [Bringezu, F.; Pinkerton, K. E.; Zasadzinski, J. A. Langmuir 2003, 19, 2900-2907] and meconium, the first excrement of the newborn, are examples for such LS poison. In neonates, intrauterine aspiration of meconium is a known cause for morbidity and mortality. We studied in vitro the interactions between modified porcine LSs (Curosurf), used as LS replacement, and meconium, as well as between their artificial analogues, phospholipids mixture, and taurocholic acid (TA), respectively. The interactions were examined both in the bulk solution and at the air-water interface, representing the pre- and postnatal situations. It was found that the artificial analogues represent the natural system reliably and exhibit similar effects. TA, a principle component of bile, is an amphiphilic sterol compound in which the hydrophilic and hydrophobic moieties are presented at different faces of the sterol plane. Here we found that TA affects the structure of both monolayers at the interface and surfactant aggregates in solution. A likely poisoning mechanism is by stereoselective penetration of TA into the lamellar or monolayer structures, thus disrupting the contiguous structure of the intact monolayer or the bilayer vesicle structure.

Protein-lipid interactions and surface activity in the pulmonary surfactant system

Pulmonary surfactant is a lipid-protein complex, synthesized and secreted by the respiratory epithelium of lungs to the alveolar spaces, whose main function is to reduce the surface tension at the air-liquid interface to minimize the work of breathing. The activity of surfactant at the alveoli involves three main processes: (i) transfer of surface active molecules from the aqueous hypophase into the interface, (ii) surface tension reduction to values close to 0 mN/m during compression at expiration and (iii) re-extension of the surface active film upon expansion at inspiration. Phospholipids are the main surface active components of pulmonary surfactant, but the dynamic behaviour of phospholipids along the breathing cycle requires the necessary participation of some specific surfactant associated proteins. The present review summarizes the current knowledge on the structure, disposition and lipid-protein interactions of the hydrophobic surfactant proteins SP-B and SP-C, the two main actors participating in the surface properties of pulmonary surfactant. Some of the methodologies currently used to evaluate the surface activity of the proteins in lipid-protein surfactant preparations are also revised. Working models for the potential molecular mechanism of SP-B and SP-C are finally discussed. SP-B might act in surfactant as a sort of amphipathic tag, directing the lipid-protein complexes to insert and re-insert very efficiently into the air-liquid interface along successive breathing cycles. SP-C could be essential to maintain association of lipid-protein complexes with the interface at the highest compressed states, at the end of exhalation. The understanding of the mechanisms of action of these proteins is critical to approach the design and development of new clinical surfactant preparations for therapeutical applications.

Adsorption of lysozyme to phospholipid and meibomian lipid monolayer films

It is believed that a lipid layer forms the outer layer of the pre-ocular tear film and this layer helps maintain tear film stability by lowering its surface tension. Proteins of the aqueous layer of the tear film (beneath the lipid layer) may also contribute to reducing surface tension by adsorbing to, or penetrating the lipid layer. The purpose of this study was to compare the penetration of lysozyme, a tear protein, into films of meibomian lipids and phospholipids held at different surface pressures to determine if lysozyme were part of the surface layer of the tear film. Films of meibomian lipids or phospholipids were spread onto the surface of a buffered aqueous subphase. Films were compressed to particular pressures and lysozyme was injected into the subphase. Changes in surface pressure were monitored to determine adsorption or penetration of lysozyme into the surface film. Lysozyme penetrated a meibomian lipid film at all pressures tested (max=20 mN/m). It also penetrated phosphatidylglycerol, phosphatidylserine or phosphatidylethanolamine lipid films up to a pressure of 20 mN/m. It was not able to penetrate a phosphatidylcholine film at pressures >or=10 mN/m irrespective of the temperature being at 20 or 37 degrees C. However, it was able to penetrate it at very low pressures (<10 mN/m). Epifluorescence microscopy showed that the protein either adsorbs to or penetrates the lipid layer and the pattern of mixing depended upon the lipid at the surface. These results indicate that lysozyme is present at the surface of the tear film where it contributes to decreasing the surface tension by adsorbing and penetrating the meibomian lipids. Thus it helps to stabilize the tear film.

The surface activity of purified ocular mucin at the air-liquid interface and interactions with meibomian lipids

PURPOSE

Ocular mucins are thought to contribute to the stability of the tear film by reducing surface tension. The purpose of this study was to compare the effect of different mucins and hyaluronic acid (HA) alone and mixed with meibomian lipids on the surface pressure at an air-liquid interface.

METHODS

A Langmuir trough and Wilhelmy balance were used to measure and compare the surface activity of bovine submaxillary gland mucin (BSM), purified BSM, purified bovine ocular mucin and HA, and mixtures of these with meibomian lipids, phosphatidylcholine, and phosphatidylglycerol. Their appearance at the surface of an air-buffer interface was examined using epifluorescence microscopy.

RESULTS

Purified ocular mucin had no surface activity even at concentrations that were 100 times more than normally occur in tears. By contrast, commercial BSM caused changes to surface pressure that were concentration dependent. The surface pressure-area profiles showed surface activity with maximum surface pressures of 12.3-22.5 mN/m depending on the concentration. Purified BSM showed no surface activity at low concentrations, whereas higher concentrations reached a maximum surface pressure of 25 mN/m. HA showed no surface activity, at low or high concentrations. Epifluorescence showed that the mucins were located at the air-buffer interface and changed the appearance of lipid films.

CONCLUSION

Purified bovine ocular mucin and HA have no surface activity. However, despite having no surface activity in their own right, ocular mucins are likely to be present at the surface of the tear film, where they cause an increase in surface pressure by causing a compression of the lipids (a reorganization of the lipids) and alter the viscoelastic properties at the surface.

Mode of interaction of amphiphilic alpha-helical peptide with phosphatidylcholines at the air-water interface

Surface pressure (pi)-, surface potential (deltaV)-, and dipole moment (mu(perpendicular))-area (A) isotherms and morphological behavior were examined for monolayers of a newly designed 18-mer amphiphilic alpha-helical peptide (Hel 13-5), DPPC, and DPPC/egg-PC (1:1) and their combinations by the Wilhelmy method, ionizing electrode method, fluorescence microscopy (FM), and atomic force microscopy (AFM). The newly designed Hel 13-5 showed rapid adsorption into the air-liquid interface to form interfacial films such as a SP-B function. Regardless of the composition and constituents in their multicomponent system of DPPC/egg-PC, the collapse pressure (pi(c); approximately 42 mN m(-1)) was constant, implying that Hel 13-5 with the fluid composition of egg-PC is squeezed out of Hel 13-5/DPPC/egg-PC monolayers accompanying a two- to three-dimensional phase transformation. FM showed that adding a small amount of Hel 13-5 to DPPC induced a dispersed pattern of ordered domains with a "moth-eaten" appearance, whereas shrinkage of ordered domains in size occurred for the DPPC/egg-PC mixture with Hel 13-5. Furthermore, AFM indicated that (i) the intermediate phase was formed in pure Hel 13-5 systems between monolayer states and excluded nanoparticles, (ii) protrusions necessarily located on DPPC monolayers, and (iii) beyond the collapse pressure of Hel 13-5, Hel 13-5 was squeezed out of the system into the aqueous subphase. Furthermore, hysteresis curves of these systems nicely resemble those of the DPPC/SP-B and DPPC/SP-C mixtures reported before.

Interfacial properties of pulmonary surfactant layers

The composition of the pulmonary surfactant and the border conditions of normal human breathing are relevant to characterize the interfacial behavior of pulmonary layers. Based on experimental data methods are reviewed to investigate interfacial properties of artificial pulmonary layers and to explain the behavior and interfacial structures of the main components during compression and expansion of the layers observed by epifluorescence and scanning force microscopy. Terms like over-compression, collapse, and formation of the surfactant reservoir are discussed. Consequences for the viscoelastic surface rheological behavior of such layers are elucidated by surface pressure relaxation and harmonic oscillation experiments. Based on a generalized Volmer isotherm the interfacial phase transition is discussed for the hydrophobic surfactant proteins, SP-B and SP-C, as well as for the mixtures of dipalmitoylphosphatidylcholine (DPPC) with these proteins. The behavior of the layers depends on both the oligomerisation state and the secondary structure of the hydrophobic surfactant proteins, which are controlled by the preparation of the proteins. An example for the surface properties of bronchoalveolar porcine lung washings of uninjured, injured, and Curosurf treated lavage is discussed in the light of surface behavior. An outlook summarizes the present knowledge and the main future development in this field of surface science.