EPR spectroscopy shows a microtubule-dependent conformational change in the kinesin switch 1 domain

In Vivo Trapping of Latex Bead Phagosomes for Quantitative Force Measurements

Optical trapping of organelles inside cells is a powerful technique for directly measuring the forces generated by motor proteins when they are transporting the organelle in the form of a "cargo". Such experiments provide an understanding of how multiple motors (similar or dissimilar) function in their endogenous environment. Here we describe the use of latex bead phagosomes ingested by macrophage cells as a model cargo for optical trap-based force measurements. A protocol for quantitative force measurements of microtubule-based motors (dynein and kinesins) inside macrophage cells is provided.

Comparing the structural dynamics of the human KCNE3 in reconstituted micelle and lipid bilayered vesicle environments

KCNE3 is a single transmembrane protein of the KCNE family that modulates the function and trafficking of several voltage-gated potassium channels, including KCNQ1. Structural studies of KCNE3 have been previously conducted in a wide range of model membrane mimics. However, it is important to assess the impact of the membrane mimics used on the observed conformation and dynamics. In this study, we have optimized a method for the reconstitution of the KCNE3 into POPC/POPG lipid bilayer vesicles for electron paramagnetic resonance (EPR) spectroscopy. Our CD spectroscopic data suggested that the degree of regular secondary structure for KCNE3 protein reconstituted into lipid bilayered vesicle is significantly higher than in DPC detergent micelles. Electron paramagnetic resonance (EPR) spectroscopy in combination with site-directed spin labeling (SDSL) was used to probe the structural dynamics of S49C, M59C, L67C, V85C, and S101C mutations of KCNE3 in both DPC micelles and in POPC/POPG lipid bilayered vesicles. Our CW-EPR power saturation data suggested that the site S74C is buried inside the lipid bilayered membrane while the site V85C is located outside the membrane, in contrast to DPC micelle results. These results suggest that the KCNE3 micelle structures need to be refined using data obtained in the lipid bilayered vesicles in order to ascertain the native structure of KCNE3. This work will provide guidelines for detailed structural studies of KCNE3 in a more native membrane environment and comparing the lipid bilayer results to the isotropic bicelle structure and to the KCNQ1-bound cryo-EM structure.

Plus and minus ends of microtubules respond asymmetrically to kinesin binding by a long-range directionally driven allosteric mechanism

Although it is known that majority of kinesin motors walk predominantly toward the plus end of microtubules (MTs) in a hand-over-hand manner, the structural origin of the stepping directionality is not understood. To resolve this issue, we modeled the structures of kinesin-1 (Kin1), MT, and the Kin1-MT complex using the elastic network model and calculated the residue-dependent responses to a local perturbation in the constructs. Kin1 binding elicits an asymmetric response that is pronounced in α/β-tubulin dimers in the plus end of the MT. Kin1 opens the clefts of multiple plus end α/β-tubulin dimers, creating binding-competent conformations, which is required for processivity. Reciprocally, MT induces correlations between switches I and II in the motor and enhances fluctuations in adenosine 5'-diphosphate and the residues in the binding pocket. Our findings explain both the directionality of stepping and MT effects on a key step in the catalytic cycle of kinesin.

Myosin and Other Energy-Transducing ATPases: Structural Dynamics Studied by Electron Paramagnetic Resonance

The objective of this article was to document the energy-transducing and regulatory interactions in supramolecular complexes such as motor, pump, and clock ATPases. The dynamics and structural features were characterized by motion and distance measurements using spin-labeling electron paramagnetic resonance (EPR) spectroscopy. In particular, we focused on myosin ATPase with actin-troponin-tropomyosin, neural kinesin ATPase with microtubule, P-type ion-motive ATPase, and cyanobacterial clock ATPase. Finally, we have described the relationships or common principles among the molecular mechanisms of various energy-transducing systems and how the large-scale thermal structural transition of flexible elements from one state to the other precedes the subsequent irreversible chemical reactions.

Shaft Function of Kinesin-1's α4 Helix in the Processive Movement

INTRODUCTION

Kinesin-1 motor is a molecular walking machine constructed with amino acids. The understanding of how those structural elements play their mechanical roles is the key to the understanding of kinesin-1 mechanism.

METHODS

Using molecular dynamics simulations, we investigate the role of a helix structure, α4 (also called switch-II helix), of kinesin-1's motor domain in its processive movement along microtubule.

RESULTS

Through the analysis of the structure and the interactions between α4 and the surrounding residues in different nucleotide-binding states, we find that, mechanically, this helix functions as a shaft for kinesin-1's motor-domain rotation and, structurally, it is an amphipathic helix ensuring its shaft functioning. The hydrophobic side of α4 consists strictly of hydrophobic residues, making it behave like a lubricated surface in contact with the core β-sheet of kinesin-1's motor domain. The opposite hydrophilic side of α4 leans firmly against microtubule with charged residues locating at both ends to facilitate its positioning onto the intra-tubulin groove.

CONCLUSIONS

The special structural feature of α4 makes for an effective reduction of the conformational work in kinesin-1's force generation process.

Anchor Effect of Interactions Between Kinesin's Nucleotide-Binding Pocket and Microtubule

Microtubule not only provides the track for kinesin but also modulates kinesin's mechanochemical cycle. Microtubule binding greatly increases the rates of two chemical steps occurring inside the nucleotide-binding pocket (NBP) of kinesin, i.e., ATP hydrolysis and ADP release. Kinesin neck linker docking (the key force-generation step) is initiated by the motor head rotation induced by ATP binding which needs an anchor provided by microtubule. These functions of microtubule can only be accomplished through interactions with kinesin. Based on the newly obtained crystal structures of kinesin-microtubule complexes, we investigate the interactions between kinesin's NBP and microtubule using molecular dynamics simulations. We find that the N-3 motif of NBP has direct interactions with a group of negatively charged residues on α-tubulin through Ser235 and Lys237. These specific long-range interactions induce binding of NBP to microtubule at the right position and assist the formation of the indirect interaction between NBP and microtubule. These interactions between N-3 and microtubule have an important anchor effect for kinesin's motor domain during its rotation with Ser235 as the rotation center, and also play a crucial role in stabilizing the ATP-hydrolysis environment.

Examining kinesin processivity within a general gating framework

Kinesin-1 is a dimeric motor that transports cargo along microtubules, taking 8.2-nm steps in a hand-over-hand fashion. The ATP hydrolysis cycles of its two heads are maintained out of phase by a series of gating mechanisms, which lead to processive runs averaging ∼1 μm. A key structural element for inter-head coordination is the neck linker (NL), which connects the heads to the stalk. To examine the role of the NL in regulating stepping, we investigated NL mutants of various lengths using single-molecule optical trapping and bulk fluorescence approaches in the context of a general framework for gating. Our results show that, although inter-head tension enhances motor velocity, it is crucial neither for inter-head coordination nor for rapid rear-head release. Furthermore, cysteine-light mutants do not produce wild-type motility under load. We conclude that kinesin-1 is primarily front-head gated, and that NL length is tuned to enhance unidirectional processivity and velocity.

DOI:http://dx.doi.org/10.7554/eLife.07403.001

In cells, molecules are moved from one location to another by motor proteins. Kinesins are a large family of such motors that transport their cargos along long filaments known as microtubules. Most kinesin molecules are formed from two identical protein chains. Each chain has a motor region at one end (called the head) that can attach to microtubules. The other end of each protein chain wraps around its partner to form a common stalk region (called the tail) that links to the cargo being carried.

The two kinesin heads are connected to the tail via a ‘neck linker’ region, and they advance along the microtubule in strict alternation, similar to the way our legs move when walking. During each step, the front head remains tightly associated with the filament as the trailing head releases itself, advances beyond the front head, and reattaches to become the new leading head. The two heads need to coordinate their activities, so that at any given time, they're not at the same stage in the process. For example, if both heads remained bound to the microtubule at the same time, the motor would not be able to advance. If they both released, the motor would fall off the filament and diffuse away. However, the process by which the heads coordinate is not fully understood, and different models for how this process works have been proposed.

Now, Andreasson, Milic et al. have examined the role played by the neck linker in coordinating the motor's movement using a technique known as ‘optical trapping’. The experiments involved attaching microscopic beads to the motor proteins, which serve as markers that can be tracked. The beads can also be used to exert controlled forces on the kinesin molecules, to see how they respond to different loads.

Andreasson, Milic et al. extended the length of neck linker by inserting extra amino acids (which are the building blocks of proteins) into this region of the protein. It was found that kinesins can still walk even when each neck linker was extended by up to six additional amino acids. However, introducing even a single amino acid into the linker relaxed the normal tension that exists between the heads when these are both bound to the filament. This resulted in slowed speeds, shorter distances of travel, and less ability to sustain loads. The experimental results suggest that the length of the neck linker in naturally occurring kinesins may be optimized to support maximum movement. Based on their data, Andreasson, Milic et al. propose a general framework for understanding the communication that needs to take place between the heads in order to walk in a coordinated manner. Further work is required to understand if motor proteins other than kinesins can also be understood with this same framework.

DOI:http://dx.doi.org/10.7554/eLife.07403.002

Tau interconverts between diffusive and stable populations on the microtubule surface in an isoform and lattice specific manner

It has been demonstrated that Tau exists on the microtubule lattice in both diffusing and static populations, but how this may relate to Tau function is currently unclear. Tau isoforms are developmentally regulated and have been shown to have disparate effects on microtubule polymerization, the ability to bind microtubules, and the ability to inhibit kinesin. It has also been shown that Tau is sensitive to microtubule stabilizing agents and the ability to affect the persistence length of microtubules and to inhibit kinesin can be altered by stabilizing microtubules with various nucleotide analogs. Given these observations, it is likely the behavior of Tau is dictated by both the isoform of Tau and by structural changes in the microtubule lattice. In the present study, we use single molecule imaging to examine the behavior of the three-repeat short (3RS) isoform and the four-repeat long (4RL) isoform on different microtubule tracks stabilized with either paclitaxel or guanylyl-(α,β)-methylene-diphosphate (GMPCPP). On paclitaxel-stabilized microtubules, we find 3RS-Tau favors the static conformation and forms complexes consisting of 2-3 molecules, while 4RL-Tau predominantly exists as a single molecule equally distributed between the static and diffusing populations. However, on GMPCPP-stabilized microtubules both isoforms favor the diffusing conformation and do not form static complexes composed of more than one Tau molecule. We find both isoforms of Tau interconvert between static and diffusing populations on the microtubule surface, and the equilibrium between these two states depends on both the isoform of Tau and the structure of the underlying microtubule lattice.

Nucleotide-dependent displacement and dynamics of the α-1 helix in kinesin revealed by site-directed spin labeling EPR

In kinesin X-ray crystal structures, the N-terminal region of the α-1 helix is adjacent to the adenine ring of the bound nucleotide, while the C-terminal region of the helix is near the neck-linker (NL). Here, we monitor the displacement of the α-1 helix within a kinesin monomer bound to microtubules (MTs) in the presence or absence of nucleotides using site-directed spin labeling EPR. Kinesin was doubly spin-labeled at the α-1 and α-2 helices, and the resulting EPR spectrum showed dipolar broadening. The inter-helix distance distribution showed that 20% of the spins have a peak characteristic of 1.4-1.7 nm separation, which is similar to what is predicted from the X-ray crystal structure, albeit 80% were beyond the sensitivity limit (>2.5 nm) of the method. Upon MT binding, the fraction of kinesin exhibiting an inter-helix distance of 1.4-1.7 nm in the presence of AMPPNP (a non-hydrolysable ATP analog) and ADP was 20% and 25%, respectively. In the absence of nucleotide, this fraction increased to 40-50%. These nucleotide-induced changes in the fraction of kinesin undergoing displacement of the α-1 helix were found to be related to the fraction in which the NL undocked from the motor core. It is therefore suggested that a shift in the α-1 helix conformational equilibrium occurs upon nucleotide binding and release, and this shift controls NL docking onto the motor core.

Metal switch-controlled myosin II from Dictyostelium discoideum supports closure of nucleotide pocket during ATP binding coupled to detachment from actin filaments

G-proteins, kinesins, and myosins are hydrolases that utilize a common protein fold and divalent metal cofactor (typically Mg(2+)) to coordinate purine nucleotide hydrolysis. The nucleoside triphosphorylase activities of these enzymes are activated through allosteric communication between the nucleotide-binding site and the activator/effector/polymer interface to convert the free energy of nucleotide hydrolysis into molecular switching (G-proteins) or force generation (kinesins and myosin). We have investigated the ATPase mechanisms of wild-type and the S237C mutant of non-muscle myosin II motor from Dictyostelium discoideum. The S237C substitution occurs in the conserved metal-interacting switch-1, and we show that this substitution modulates the actomyosin interaction based on the divalent metal present in solution. Surprisingly, S237C shows rapid basal steady-state Mg(2+)- or Mn(2+)-ATPase kinetics, but upon binding actin, its MgATPase is inhibited. This actin inhibition is relieved by Mn(2+), providing a direct and experimentally reversible linkage of switch-1 and the actin-binding cleft through the swapping of divalent metals in the reaction. Using pyrenyl-labeled F-actin, we demonstrate that acto·S237C undergoes slow and weak MgATP binding, which limits the rate of steady-state catalysis. Mn(2+) rescues this effect to near wild-type activity. 2'(3')-O-(N-Methylanthraniloyl)-ADP release experiments show the need for switch-1 interaction with the metal cofactor for tight ADP binding. Our results are consistent with strong reciprocal coupling of nucleoside triphosphate and F-actin binding and provide additional evidence for the allosteric communication pathway between the nucleotide-binding site and the filament-binding region.

Conformational changes at the nucleotide site in the presence of bound ADP do not set the velocity of fast Drosophila myosins

The conformational changes in myosin associated with ADP release and their influence on actin sliding velocity are not understood. Following actin binding, the myosin active site is in equilibrium between a closed and open ADP bound state, with the open state previously thought to favor ADP release and thus expected to be favored in faster myosins. However, our recent work with a variety of myosins suggests the opposite, that the open conformation is dominant in slower myosins, which have higher ADP affinities. To test if this correlation holds for fast myosin isoforms, we determined the relationships between conformational pocket dynamics, ADP affinity and velocity of four Drosophila myosins: indirect flight muscle (IFM) myosin (IFI), embryonic muscle myosin (EMB) and two IFI/EMB chimeras. Electron paramagnetic resonance spectra of nucleotide-analog spin probes (SLADP) bound to IFI subfragment-1 in the absence of actin showed a high degree of immobilization, indicating a predominately closed nucleotide pocket. The A·M·SLADP spectra of all four myosins in fibers (actin bound) also indicated an equilibrium favoring the closed conformation with the closed state closing even further. However, the energetics of pocket closure did not correlate with Drosophila myosin actin velocity suggesting our previous model relating pocket dynamics to velocity does not hold for fast myosin isoforms. We conclude that for these fast myosins, and possibly other fast myosins, velocity is controlled by factors other than the ratio of open to closed nucleotide pocket conformation.

Reconstitution of KCNE1 into lipid bilayers: comparing the structural, dynamic, and activity differences in micelle and vesicle environments

KCNE1 (minK), found in the human heart and cochlea, is a transmembrane protein that modulates the voltage-gated potassium KCNQ1 channel. While KCNE1 has previously been the subject of extensive structural studies in lyso-phospholipid detergent micelles, key observations have yet to be confirmed and refined in lipid bilayers. In this study, a reliable method for reconstituting KCNE1 into lipid bilayer vesicles composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (sodium salt) (POPG) was developed. Microinjection of the proteoliposomes into Xenopus oocytes expressing the human KCNQ1 (K(V)7.1) voltage-gated potassium channel led to nativelike modulation of the channel. Circular dichroism spectroscopy demonstrated that the percent helicity of KCNE1 is significantly higher for the protein reconstituted in lipid vesicles than for the previously described structure in 1.0% 1-myristoyl-2-hydroxy-sn-glycero-3-phospho(1'-rac-glycerol) (sodium salt) (LMPG) micelles. SDSL electron paramagnetic resonance spectroscopic techniques were used to probe the local structure and environment of Ser28, Phe54, Phe57, Leu59, and Ser64 of KCNE1 in both POPC/POPG vesicles and LMPG micelles. Spin-labeled KCNE1 cysteine mutants at Phe54, Phe57, Leu59, and Ser64 were found to be located inside POPC/POPG vesicles, whereas Ser28 was found to be located outside the membrane. Ser64 was shown to be water inaccessible in vesicles but found to be water accessible in LMPG micelle solutions. These results suggest that key components of the micelle-derived structure of KCNE1 extend to the structure of this protein in lipid bilayers but also demonstrate the need to refine this structure using data derived from the bilayer-reconstituted protein to more accurately define its native structure. This work establishes the basis for such future studies.

Multiple conformations of the nucleotide site of Kinesin family motors in the triphosphate state

Identifying conformational changes in kinesin family motors associated with nucleotide and microtubule (MT) binding is essential to determining an atomic-level model for force production and motion by the motors. Using the mobility of nucleotide analog spin probes bound at the active sites of kinesin family motors to monitor conformational changes, we previously demonstrated that, in the ADP state, the open nucleotide site closes upon MT binding [Naber, N., Minehardt, T. J., Rice, S., Chen, X., Grammer, J., Matuska, M., et al. (2003). Closing of the nucleotide pocket of kinesin family motors upon binding to microtubules. Science, 300, 798-801]. We now extend these studies to kinesin-1 (K) and ncd (nonclaret disjunctional protein) motors in ATP and ATP-analog states. Our results reveal structural differences between several triphosphate and transition-state analogs bound to both kinesin and ncd in solution. The spectra of kinesin/ncd in the presence of SLADP•AlFx/BeFx and kinesin, with the mutation E236A (K-E236A; does not hydrolyze ATP) bound to ATP, show an open conformation of the nucleotide pocket similar to that seen in the kinesin/ncd•ADP states. In contrast, the triphosphate analogs K•SLAMPPNP and K-E236A•SLAMPPNP induce a more immobilized component of the electron paramagnetic resonance spectrum, implying closing of the nucleotide site. The MT-bound states of all of the triphosphate analogs reveal two novel spectral components. The equilibrium between these two components is only weakly dependent on temperature. Both components have more restricted mobility than observed in MT-bound diphosphate states. Thus, the closing of the nucleotide pocket when the diphosphate state binds to MTs is amplified in the triphosphate state, perhaps promoting accelerated ATP hydrolysis. Consistent with this idea, molecular dynamics simulations show a good correlation between our spectroscopic data, X-ray crystallography, and the electron microscopy of MT-bound triphosphate-analog states.

An atomic-level mechanism for activation of the kinesin molecular motors

Kinesin cytoskeletal motors convert the energy of ATP hydrolysis into stepping movement along microtubules. A partial model of this process has been derived from crystal structures, which show that movement of the motor domain relative to its major microtubule binding element, the switch II helix, is coupled to docking of kinesin's neck linker element along the motor domain. This docking would displace the cargo in the direction of travel and so contribute to a step. However, the crystal structures do not reveal how ATP binding and hydrolysis govern this series of events. We used cryoelectron microscopy to derive 8-9 A-resolution maps of four nucleotide states encompassing the microtubule-attached kinetic cycle of a kinesin motor. The exceptionally high quality of these maps allowed us to build in crystallographically determined conformations of kinesin's key subcomponents, yielding novel arrangements of kinesin's switch II helix and nucleotide-sensing switch loops. The resulting atomic models reveal a seesaw mechanism in which the switch loops, triggered by ATP binding, propel their side of the motor domain down and thereby elicit docking of the neck linker on the opposite side of the seesaw. Microtubules engage the seesaw mechanism by stabilizing the formation of extra turns at the N terminus of the switch II helix, which then serve as an anchor for the switch loops as they modulate the seesaw angle. These observations explain how microtubules activate kinesin's ATP-sensing machinery to promote cargo displacement and inform the mechanism of kinesin's ancestral relative, myosin.

The Kinesin-1 tail conformationally restricts the nucleotide pocket

We have used electron paramagnetic resonance and fluorescence spectroscopy to study the interaction between the kinesin-1 head and its regulatory tail domain. The interaction between the tails and the enzymatically active heads has been shown to inhibit intrinsic and microtubule-stimulated ADP release. Here, we demonstrate that the probe mobility of two different spin-labeled nucleotide analogs in the kinesin-1 nucleotide pocket is restricted upon binding of the tail domain to kinesin-1 heads. This conformational restriction is distinct from the microtubule-induced changes in the nucleotide pocket. Unlike myosin V, this tail-induced restriction occurs independent of nucleotide state. We find that the head-tail interaction that causes the restriction only weakly stabilizes Mg(2+) in the nucleotide pocket. The conformational restriction also occurs when a tail construct containing a K922A point mutation is used. This mutation eliminates the tail's ability to inhibit ADP release, indicating that the tail does not inhibit nucleotide ejection from the pocket by simple steric hindrance. Together, our data suggest that the observed head-tail interaction serves as a scaffold to position K922 to exert its inhibitory effect, possibly by interacting with the nucleotide alpha/beta-phosphates in a manner analogous to the arginine finger regulators of some G proteins.

The kinesin-1 motor protein is regulated by a direct interaction of its head and tail

Kinesin-1 is a molecular motor protein that transports cargo along microtubules. Inside cells, the vast majority of kinesin-1 is regulated to conserve ATP and to ensure its proper intracellular distribution and coordination with other molecular motors. Regulated kinesin-1 folds in half at a hinge in its coiled-coil stalk. Interactions between coiled-coil regions near the enzymatically active heads at the N terminus and the regulatory tails at the C terminus bring these globular elements in proximity and stabilize the folded conformation. However, it has remained a mystery how kinesin-1's microtubule-stimulated ATPase activity is regulated in this folded conformation. Here, we present evidence for a direct interaction between the kinesin-1 head and tail. We photochemically cross-linked heads and tails and produced an 8-A cryoEM reconstruction of the cross-linked head-tail complex on microtubules. These data demonstrate that a conserved essential regulatory element in the kinesin-1 tail interacts directly and specifically with the enzymatically critical Switch I region of the head. This interaction suggests a mechanism for tail-mediated regulation of the ATPase activity of kinesin-1. In our structure, the tail makes simultaneous contacts with the kinesin-1 head and the microtubule, suggesting the tail may both regulate kinesin-1 in solution and hold it in a paused state with high ADP affinity on microtubules. The interaction of the Switch I region of the kinesin-1 head with the tail is strikingly similar to the interactions of small GTPases with their regulators, indicating that other kinesin motors may share similar regulatory mechanisms.

The role of microtubules in processive kinesin movement

Kinesins are microtubule-based motors that are important for various intracellular transport processes. To understand the mechanism of kinesin movement, X-ray crystallography has been used to study the atomic structures of kinesin. However, as crystal structures of kinesin alone accumulate, it is becoming clear that kinesin structures should also be investigated with the microtubule to understand the contribution of the microtubule track to the nucleotide-induced conformational changes of kinesin. Recently, several high-resolution structures of kinesin with microtubules were obtained using cryo-electron microscopy. Comparison with X-ray crystallographic structures revealed the importance of the microtubule in determining the conformation of kinesin. Together with recent biophysical data, we describe different structural models of processive kinesin movement and provide a framework for future experiments.

Conformational dynamics of loops L11 and L12 of kinesin as revealed by spin-labeling EPR

The EPR spectra of the spin labels attached to loops L11 and L12 of kinesin were resolved into slow (rotational correlation time, tau=10-45 ns) and fast (tau=2 ns) components. The fraction of the slow component increased considerably when kinesin was complexed with a microtubule (MT). On MT binding and in the presence of nucleotides ADP and AMPPNP, the spin labels on L11, particularly at A252C and L249C, significantly decreased the fraction of the slow component. Moreover, dipolar EPR detected a wide distribution in distance range, 1-2 nm between the two spin labels attached to T242C/A252C or A247C/A252C; this distribution was slightly narrower in the presence of MTs than in their absence. These results suggested that the L11 residues undergo conformational transition on the binding of nucleotides and MT, while these residues remained to fluctuate over a nanometer range.

Dynamics of the nucleotide pocket of myosin measured by spin-labeled nucleotides

We have used electron paramagnetic probes attached to the ribose of ATP (SL-ATP) to monitor conformational changes in the nucleotide pocket of myosin. Spectra for analogs bound to myosin in the absence of actin showed a high degree of immobilization, indicating a closed nucleotide pocket. In the Actin.Myosin.SL-AMPPNP, Actin.Myosin.SL-ADP.BeF(3), and Actin.Myosin.SL-ADP.AlF(4) complexes, which mimic weakly binding states near the beginning of the power stroke, the nucleotide pocket remained closed. The spectra of the strongly bound Actin.Myosin.SL-ADP complex consisted of two components, one similar to the closed pocket and one with increased probe mobility, indicating a more open pocket, The temperature dependence of the spectra showed that the two conformations of the nucleotide pocket were in equilibrium, with the open conformation more favorable at higher temperatures. These results, which show that opening of the pocket occurs only in the strongly bound states, appear reasonable, as this would tend to keep ADP bound until the end of the power stroke. This conclusion also suggests that force is initially generated by a myosin with a closed nucleotide pocket.

ATPase mechanism of Eg5 in the absence of microtubules: insight into microtubule activation and allosteric inhibition by monastrol

The ATPase mechanism of kinesin superfamily members in the absence of microtubules remains largely uncharacterized. We have adopted a strategy to purify monomeric human Eg5 (HsKSP/Kinesin-5) in the nucleotide-free state (apoEg5) in order to perform a detailed transient state kinetic analysis. We have used steady-state and presteady-state kinetics to define the minimal ATPase mechanism for apoEg5 in the absence and presence of the Eg5-specific inhibitor, monastrol. ATP and ADP binding both occur via a two-step process with the isomerization of the collision complex limiting each forward reaction. ATP hydrolysis and phosphate product release are rapid steps in the mechanism, and the observed rate of these steps is limited by the relatively slow isomerization of the Eg5-ATP collision complex. A conformational change coupled to ADP release is the rate-limiting step in the pathway. We propose that the microtubule amplifies and accelerates the structural transitions needed to form the ATP hydrolysis competent state and for rapid ADP release, thus stimulating ATP turnover and increasing enzymatic efficiency. Monastrol appears to bind weakly to the Eg5-ATP collision complex, but after tight ATP binding, the affinity for monastrol increases, thus inhibiting the conformational change required for ADP product release. Taken together, we hypothesize that loop L5 of Eg5 undergoes an "open" to "closed" structural transition that correlates with the rearrangements of the switch-1 and switch-2 regions at the active site during the ATPase cycle.

A torque component in the kinesin-1 power stroke

Kinesin-1 is a twin-headed molecular motor that moves along microtubules in 8-nm steps, using a walking action in which the two heads interact alternately with the microtubule. Constructs with only one head can also produce impulses of force and motion, indicating that the walking action is an amplification strategy that leverages an underlying force-generating event. Recent work suggests that directional force is produced either by directionally biased selection of microtubule binding sites or by a conformational change subsequent to the binding event. We report here that surface-attached rat kinesin-1 monomers drive counterclockwise rotation of sliding microtubules around their axes, and that by manipulating the assay geometry, we could reduce or block the torsional motion with negligible effects on the axial motion. We can account for this behavior on the simple assumption that kinesin heads tend to bind to the closest available tubulin heterodimer in the lattice, but only in the case where an additional biasing process is present that shifts the start position for diffusion-to-capture toward the microtubule plus end by approximately 1 nm.

Kinetic effects of kinesin switch I and switch II mutations

We have examined several mutants in the switch I, switch II region of rat kinesin. Pre-steady-state kinetic analysis of association and dissociation of an N256K mutant with nucleotides and microtubules demonstrates that the mutation blocks microtubule stimulation of nucleotide release and ATP hydrolysis without affecting other kinetic parameters. The results suggest that ADP release on one head may be coupled to structural changes on the other head to stimulate ATP hydrolysis. Mutations at Glu(237), a residue predicted to participate in a hydrogen-bond interaction critical for nucleotide processing, reduced or abolished microtubule-dependent ATPase activity with only minor effects on pre-steady-state rates of nucleotide release or binding. Mutations at Glu(200), a residue that could serve as an alternate electron acceptor in the above-mentioned hydrogen-bond interaction, had small effects on microtubule-dependent ATPase activity despite modestly reducing the rate at which microtubule-stimulated nucleotide release occurs. These results further clarify the pathway of coupling of ATP hydrolysis to force production.

Alternating site ATPase pathway of rat conventional kinesin

The pathway of ATP hydrolysis by rat kinesin was established by pre-steady-state kinetic methods. A 406-residue long N-terminal fragment was shown by sedimentation equilibrium analysis to form a dimer with a K(d) of 46 nm. The pathway of ATP hydrolysis follows the Gilbert-Johnson pathway determined previously for a similarsized N-terminal fragment of Drosophila conventional kinesin. However, the rates of ADP release were at least 3-fold faster, and ATP hydrolysis was approximately 5-fold faster. Paralleling our previous mechanistic data, these results support an alternating site ATPase pathway, including a captive head state as an intermediate in the kinesin ATPase cycle. The kinetic data presented in this report once again point to the importance of the captive head state and argue against a pathway that short-circuits this key intermediate. In addition, several unique aspects of the rat kinesin kinetics reveal new aspects of the ATPase-coupling mechanism. These studies provide a baseline set of kinetic parameters against which future studies of rat kinesin mutants may be evaluated and directly correlated with the structure of the dimeric kinesin.

Microtubule-kinesin interface mutants reveal a site critical for communication

Strict coordination of the two motor domains of kinesin is required for driving the processive movement of organelles along microtubules. Glutamate 164 of the kinesin heavy chain was shown to be critical for kinesin function through in vivo genetics in Drosophila melanogaster. The mutant motor E164K exhibited reduced steady-state ATPase activity and higher affinity for both ATP and microtubules. Moreover, an alanine substitution at this position (E164A) caused similar defects. It became stalled on the microtubule and was unable to bind and hydrolyze ATP at the second motor domain. Glu(164), which has been conserved through evolution, is located at the motor-microtubule interface close to key residues on helix alpha12 of beta-tubulin. We explored further the contributions of Glu(164) to motor function using several site-directed mutant proteins: E164K, E164N, E164D, E164Q, and D165A. The results indicate that the microtubule-E164K complex can only bind and hydrolyze one ATP. ATP with increased salt was able to dissociate a population of E164K motors from the microtubule but could not dissociate E164A. We tested the basis of the stabilized microtubule interaction with E164K, E164N, and E164A. The results provide new insights about the motor-microtubule interface and the pathway of communication for processive motility.

ESR reveals the mobility of the neck linker in dimeric kinesin

Conventional kinesin is a highly processive motor that converts the chemical energy of ATP hydrolysis into the unidirectional motility along microtubules. The processivity is thought to depend on the coordination between ATPase cycles of two motor domains and their neck linkers. Here we have used site-directed spin labeling electron spin resonance (SDSL-ESR) to determine the conformation of the neck linker in kinesin dimer in the presence and absence of microtubules. The spectra show that the neck linkers co-exist in both docked and disordered conformations, which is consistent with the results of monomeric kinesin. In all nucleotide states, however, the neck linkers are well ordered when dimeric kinesin is bound to the microtubule. This result suggests that the orientation of each neck linker that is fixed rigidly controls the kinesin motion along microtubule tracks.

A kinesin switch I arginine to lysine mutation rescues microtubule function

Switch I and II are key active site structural elements of kinesins, myosins, and G-proteins. Our analysis of a switch I mutant (R210A) in Drosophila melanogaster kinesin showed a reduction in microtubule affinity, a loss in cooperativity between the motor domains, and an ATP hydrolysis defect leading to aberrant detachment from the microtubule. To investigate the conserved arginine in switch I further, a lysine substitution mutant was generated. The R210K dimeric motor has lost the ability to hydrolyze ATP; however, it has rescued microtubule function. Our results show that R210K has restored microtubule association kinetics, microtubule affinity, ADP release kinetics, and motor domain cooperativity. Moreover, the active site at head 1 is able to distinguish ATP, ADP, and AMP-PNP to signal head 2 to bind the microtubule and release mantADP with kinetics comparable with wild-type. Therefore, the structural pathway of communication from head 1 to head 2 is restored, and head 2 can respond to this signal by binding the microtubule and releasing mantADP. Structural modeling revealed that lysine could retain some of the hydrogen bonds made by arginine but not all, suggesting a structural hypothesis for the ability of lysine to rescue microtubule function in the Arg210 mutant.

Closing of the nucleotide pocket of kinesin-family motors upon binding to microtubules

We have used adenosine diphosphate analogs containing electron paramagnetic resonance (EPR) spin moieties and EPR spectroscopy to show that the nucleotide-binding site of kinesin-family motors closes when the motor.diphosphate complex binds to microtubules. Structural analyses demonstrate that a domain movement in the switch 1 region at the nucleotide site, homologous to domain movements in the switch 1 region in the G proteins [heterotrimeric guanine nucleotide-binding proteins], explains the EPR data. The switch movement primes the motor both for the free energy-yielding nucleotide hydrolysis reaction and for subsequent conformational changes that are crucial for the generation of force and directed motion along the microtubule.