Evidence that collagen fibrils in tendons are inhomogeneously structured in a tubelike manner

Role of carboxylic organic molecules in interfibrillar collagen mineralization

Bone is a composite material made up of inorganic and organic counterparts. Most of the inorganic counterpart accounts for calcium phosphate (CaP) whereas the major organic part is composed of collagen. The interfibrillar mineralization of collagen is an important step in the biomineralization of bone and tooth. Studies have shown that synthetic CaP undergoes auto-transformation to apatite nanocrystals before entering the gap zone of collagen. Also, the synthetic amorphous calcium phosphate/collagen combination alone is not capable of initiating apatite nucleation rapidly. Therefore, it was understood that there is the presence of a nucleation catalyst obstructing the auto-transformation of CaP before entering the collagen gap zone and initiating rapid nucleation after entering the collagen gap zone. Therefore, studies were focused on finding the nucleation catalyst responsible for the regulation of interfibrillar collagen mineralization. Organic macromolecules and low-molecular-weight carboxylic compounds are predominantly present in the bone and tooth. These organic compounds can interact with both apatite and collagen. Adsorption of the organic compounds on the apatite nanocrystal governs the nucleation, crystal growth, lattice orientation, particle size, and distribution. Additionally, they prevent the auto-transformation of CaP into apatite before entering the interfibrillar compartment of the collagen fibril. Therefore, many carboxylic organic compounds have been utilized in developing CaP. In this review, we have covered different carboxylate organic compounds governing collagen interfibrillar mineralization.

Gelatin as It Is: History and Modernity

The data concerning the synthesis and physicochemical characteristics of one of the practically important proteins-gelatin, as well as the possibilities of its practical application, are systematized and discussed. When considering the latter, emphasis is placed on the use of gelatin in those areas of science and technology that are associated with the specifics of the spatial/molecular structure of this high-molecular compound, namely, as a binder for the silver halide photographic process, immobilized matrix systems with a nano-level organization of an immobilized substance, matrices for creating pharmaceutical/dosage forms and protein-based nanosystems. It was concluded that the use of this protein is promising in the future.

Gelatin Matrix as Functional Biomaterial for Immobilization of Nanoparticles of Metal-Containing Compounds

The data concerning the synthesis and physicochemical characteristics of specific functional biomaterials-biopolymer-immobilized matrix systems based on gelatin as an array and chemical compounds, which include atoms of various metal elements-are systematized and discussed. The features of this biopolymer which determine the specific properties of the immobilized matrix systems formed by it and their reactivity, are noted. Data on gelatin-immobilized systems in which immobilized substances are elemental metals and coordination compounds formed as a result of redox processes, nucleophilic/electrophilic substitution reactions, and self-assembly (template synthesis), are presented. The possibilities of the practical use of metal-containing gelatin-immobilized systems are promising for the future; in particular, their potential in medicine and pharmacology as a vehicle for "targeted" drug delivery to various internal organs/tissues of the body, and, also, as potential biosensors is noted.

Collagen fibril formation in vitro: From origin to opportunities

Sometimes, to move forward, it is necessary to look back. Collagen type I is one of the most commonly used biomaterials in tissue engineering and regenerative medicine. There are a variety of collagen scaffolds and biomedical products based on collagen have been made, and the development of new ones is still ongoing. Materials, where collagen is in the fibrillar form, have some advantages: they have superior mechanical properties, higher degradation time and, what is most important, mimic the structure of the native extracellular matrix. There are some standard protocols for the formation of collagen fibrils in vitro, but if we look more carefully at those methods, we can see some controversies. For example, why is the formation of collagen gel commonly carried out at 37 ​°C, when it was well investigated that the temperature higher than 35 ​°C results in a formation of not well-ordered fibrils? Biomimetic collagen materials can be obtained both using culture medium or neutralizing solution, but it requires a deep understanding of all of the crucial points. One of this point is collagen extraction method, since not every method retains the ability of collagen to reconstitute native banded fibrils. Collagen polymorphism is also often overlooked in spite of the appearance of different polymorphic forms during fibril formation is possible, especially when collagen blends are utilized. In this review, we will not only pay attention to these issues, but we will overview the most prominent works related to the formation of collagen fibrils in vitro starting from the first approaches and moving to the up-to-date recipes.

Impact of Collagen Crosslinking on Dislocated Human Shoulder Capsules-Effect on Structural and Mechanical Properties

Classical treatments of shoulder instability are associated with recurrence. To determine whether the modification of the capsule properties may be an alternative procedure, the effect of crosslinking treatment on the structure and mechanical properties of diseased human shoulder capsules was investigated. Joint capsules harvested from patients during shoulder surgery (n = 5) were treated or not with UV and/or riboflavin (0.1%, 1.0% and 2.5%). The structure and the mechanical properties of the capsules were determined by atomic force microscopy. The effect of treatments on cell death was investigated. Collagen fibrils were well-aligned and adjacent to each other with a D-periodicity of 66.9 ± 3.2 nm and a diameter of 71.8 ± 15.4 nm in control untreated capsules. No effect of treatments was observed on the organization of the collagen fibrils nor on their intrinsic characteristics, including D-periodicity or their mean diameter. The treatments also did not induce cell death. In contrast, UV + 2.5% riboflavin induced capsule stiffness, as revealed by the increased Young's modulus values (p < 0.0001 for each patient). Our results showed that the crosslinking procedure changed the biomechanics of diseased capsules, while keeping their structural organisation unchanged at the single fibril level. The UV/riboflavin crosslinking procedure may be a promising way to preserve the functions of collagen-based tissues and tune their elasticity for clinically relevant treatments.

The mechanics of fibrillar collagen extracellular matrix

As a major component of the human body, the extracellular matrix (ECM) is a complex biopolymer network. The ECM not only hosts a plethora of biochemical interactions but also defines the physical microenvironment of cells. The physical properties of the ECM, such as its geometry and mechanics, are critical to physiological processes and diseases such as morphogenesis, wound healing, and cancer. This review provides a brief introduction to the recent progress in understanding the mechanics of ECM for researchers who are interested in learning about this relatively new subject of biophysics. This review covers the mechanics of a single ECM fiber (nanometer scale), the micromechanics of ECM (micrometer scale), and bulk rheology (greater than millimeter scale). Representative experimental measurements and basic theoretical models are introduced side by side. After discussing the physics of ECM mechanics, the review concludes by commenting on the role of ECM mechanics in healthy and tumorigenic tissues and the open questions that call for future studies at the interface of fundamental physics, engineering, and medical sciences.

Topological defects produce kinks in biopolymer filament bundles

Bundles of stiff filaments are ubiquitous in the living world, found both in the cytoskeleton and in the extracellular medium. These bundles are typically held together by smaller cross-linking molecules. We demonstrate, analytically, numerically, and experimentally, that such bundles can be kinked, that is, have localized regions of high curvature that are long-lived metastable states. We propose three possible mechanisms of kink stabilization: a difference in trapped length of the filament segments between two cross-links, a dislocation where the endpoint of a filament occurs within the bundle, and the braiding of the filaments in the bundle. At a high concentration of cross-links, the last two effects lead to the topologically protected kinked states. Finally, we explore, numerically and analytically, the transition of the metastable kinked state to the stable straight bundle.

Non-equilibrium growth and twist of cross-linked collagen fibrils

The lysyl oxidase (LOX) enzyme that catalyses cross-link formation during the assembly of collagen fibrils in vivo is too large to diffuse within assembled fibrils, and so is incompatible with a fully equilibrium mechanism for fibril formation. We propose that enzymatic cross-links are formed at the fibril surface during the growth of collagen fibrils; as a consequence no significant reorientation of previously cross-linked collagen molecules occurs inside collagen fibrils during fibril growth in vivo. By imposing local equilibrium only at the fibril surface, we develop a coarse-grained quantitative model of in vivo fibril structure that incorporates a double-twist orientation of collagen molecules and a periodic D-band density modulation along the fibril axis. Radial growth is controlled by the concentration of available collagen molecules outside the fibril. In contrast with earlier equilibrium models of fibril structure, we find that all fibrils can exhibit a core-shell structure that is controlled only by the fibril radius. At small radii a core is developed with a linear double-twist structure as a function of radius. Within the core the double-twist structure is largely independent of the D-band. Within the shell at larger radii, the structure approaches a constant twist configuration that is strongly coupled with the D-band. We suggest a stable radius control mechanism that corneal fibrils can exploit near the edge of the linear core regime; while larger tendon fibrils use a cruder version of growth control that does not select a preferred radius.

Shape and Size Control of Artificial Cells for Bottom-Up Biology

Bottom-up biology is an expanding research field that aims to understand the mechanisms underlying biological processes via in vitro assembly of their essential components in synthetic cells. As encapsulation and controlled manipulation of these elements is a crucial step in the recreation of such cell-like objects, microfluidics is increasingly used for the production of minimal artificial containers such as single-emulsion droplets, double-emulsion droplets, and liposomes. Despite the importance of cell morphology on cellular dynamics, current synthetic-cell studies mainly use spherical containers, and methods to actively shape manipulate these have been lacking. In this paper, we describe a microfluidic platform to deform the shape of artificial cells into a variety of shapes (rods and discs) with adjustable cell-like dimensions below 5 μm, thereby mimicking realistic cell morphologies. To illustrate the potential of our method, we reconstitute three biologically relevant protein systems (FtsZ, microtubules, collagen) inside rod-shaped containers and study the arrangement of the protein networks inside these synthetic containers with physiologically relevant morphologies resembling those found in living cells.

Type-I collagen fibrils: From growth morphology to local order

The length of type-I collagen fibrils in solution increases through the development and progress of pointed tips appearing successively at the two ends of an axis-symmetric shaft with constant diameter. Those tips, respectively fine ([Formula: see text]) or coarse ([Formula: see text]) have opposite molecular orientations. The [Formula: see text]-pointed tips, the first to appear, are particularly remarkable as they all show, on most of their length, a common parabolic profile which stays constant during the growth. Assuming that the latter occurs by lateral accretion of individual molecules in staggered configuration, we propose to give account of this prominent morphological feature along a purely geometrical argument, the profile of a tip being linked to the shape of the trajectories followed all along the accretion process. Among several possible trajectories, Fermat spirals lead to a parabolic profile in perfect agreement with the one observed for [Formula: see text]-pointed tips. This is to be put in relation with the presence of such spirals in phyllotactic patterns which ensure the best packing efficiency in cases of axis-symmetry, which is indeed that of dense collagen fibrils. Moreover, those patterns are structured by concentric circles of dislocations, constitutive of the structure itself, whose behaviour might contribute to the mechanical properties of the fibrils.

Cryptic binding sites become accessible through surface reconstruction of the type I collagen fibril

Collagen fibril interactions with cells and macromolecules in the extracellular matrix drive numerous cellular functions. Binding motifs for dozens of collagen-binding proteins have been determined on fully exposed collagen triple helical monomers. However, when the monomers are assembled into the functional collagen fibril, many binding motifs become inaccessible, and yet critical cellular processes occur. Here, we have developed an early stage atomic model of the smallest repeating unit of the type I collagen fibril at the fibril surface that provides a novel framework to address questions about these functionally necessary yet seemingly obstructed interactions. We use an integrative approach by combining molecular dynamics (MD) simulations with atomic force microscopy (AFM) experiments and show that reconstruction of the collagen monomers within the complex fibril play a critical role in collagen interactions. In particular, the fibril surface shows three major conformational changes, which allow cryptic binding sites, including an integrin motif involved in platelet aggregation, to be exposed. The observed dynamics and reconstruction of the fibril surface promote its role as a “smart fibril” to keep certain binding sites cryptic, and to allow accessibility of recognition domains when appropriate.

Polymorphism of stable collagen fibrils

Collagen fibrils are versatile self-assembled structures that provide mechanical integrity within mammalian tissues. The radius of collagen fibrils vary widely depending on experimental conditions in vitro or anatomical location in vivo. Here we explore the variety of thermodynamically stable fibril configurations that are available. We use a liquid crystal model of radial collagen fibril structure with a double-twist director field. Using a numerical relaxation method we show that two dimensionless parameters, the ratio of saddle-splay to twist elastic constants k24/K22 and the ratio of surface tension to chiral strength [small gamma, Greek, tilde] ≡ γ/(K22q), largely specify both the scaled fibril radius and the associated surface twist of equilibrium fibrils. We find that collagen fibrils are the stable phase with respect to the cholesteric phase only when the reduced surface tension is small, [small gamma, Greek, tilde] ⪅ 0.2. Within this stable regime, collagen fibrils can access a wide range of radii and associated surface twists. Remarkably, we find a maximal equilibrium surface twist of 0.33 rad (19°). Our results are compatible with corneal collagen fibrils, and we show how the large surface twist can explain the narrow distribution of corneal fibril radii. Conversely, we show how small surface twist is required for the thermodynamic stability of tendon fibrils in the face of considerable polydispersity of radius.

Effects of maturation and advanced glycation on tensile mechanics of collagen fibrils from rat tail and Achilles tendons

Connective tissues are ubiquitous throughout the body and consequently affect the function of many organs. In load bearing connective tissues like tendon, the mechanical functionality is provided almost exclusively by collagen fibrils that in turn are stabilized by covalent cross-links. Functionally distinct tendons display different cross-link patterns, which also change with maturation, but these differences have not been studied in detail at the fibril level. In the present study, a custom built nanomechanical test platform was designed and fabricated to measure tensile mechanics of individual fibrils from rat tendons. The influence of animal maturity (4 vs. 16 week old rats) and functionally different tendons (tail vs. Achilles tendons) were examined. Additionally the effect of methylglyoxal (MG) treatment in vitro to form advanced glycation end products (AGEs) was investigated. Age and tissue type had no significant effect on fibril mechanics, but MG treatment increased strength and stiffness without inducing brittleness and gave rise to a distinct three-phase mechanical response corroborating that previously reported in human patellar tendon fibrils. That age and tissue had little mechanical effect, tentatively suggest that variations in enzymatic cross-links may play a minor role after initial tissue formation.

STATEMENT OF SIGNIFICANCE

Tendons are connective tissues that connect muscle to bone and carry some of the greatest mechanical loads in the body, which makes them common sites of injury. A tendon is essentially a biological rope formed by thin strands called fibrils made of the protein collagen. Tendon function relies on the strength of these fibrils, which in turn depends on naturally occurring cross-links between collagen molecules, but the mechanical influence of these cross-links have not been measured before. It is believed that beneficial cross-linking occurs with maturation while additional cross-linking with aging may lead to brittleness, but this study provides evidence that maturation has little effect on mechanical function and that age-related cross-linking does not result in brittle collagen fibrils.

Imaging the Nonlinear Susceptibility Tensor of Collagen by Nonlinear Optical Stokes Ellipsometry

Nonlinear optical Stokes ellipsometric (NOSE) microscopy was demonstrated for the analysis of collagen-rich biological tissues. NOSE is based on polarization-dependent second harmonic generation imaging. NOSE was used to access the molecular-level distribution of collagen fibril orientation relative to the local fiber axis at every position within the field of view. Fibril tilt-angle distribution was investigated by combining the NOSE measurements with ab initio calculations of the predicted molecular nonlinear optical response of a single collagen triple helix. The results were compared with results obtained previously by scanning electron microscopy, nuclear magnetic resonance imaging, and electron tomography. These results were enabled by first measuring the laboratory-frame Jones nonlinear susceptibility tensor, then extending to the local-frame tensor through pixel-by-pixel corrections based on local orientation.

Characteristics and Young's Modulus of Collagen Fibrils from Expanded Skin Using Anisotropic Controlled Rate Self-Inflating Tissue Expander

Mechanical properties of expanded skin tissue are different from normal skin, which is dependent mainly on the structural and functional integrity of dermal collagen fibrils. In the present study, mechanical properties and surface topography of both expanded and nonexpanded skin collagen fibrils were evaluated. Anisotropic controlled rate self-inflating tissue expanders were placed beneath the skin of sheep's forelimbs. The tissue expanders gradually increased in height and reached equilibrium in 2 weeks. They were left in situ for another 2 weeks before explantation. Expanded and normal skin samples were surgically harvested from the sheep (n = 5). Young's modulus and surface topography of collagen fibrils were measured using an atomic force microscope. A surface topographic scan showed organized hierarchical structural levels: collagen molecules, fibrils and fibers. No significant difference was detected for the D-banding pattern: 63.5 ± 2.6 nm (normal skin) and 63.7 ± 2.7 nm (expanded skin). Fibrils from expanded tissues consisted of loosely packed collagen fibrils and the width of the fibrils was significantly narrower compared to those from normal skin: 153.9 ± 25.3 and 106.7 ± 28.5 nm, respectively. Young's modulus of the collagen fibrils in the expanded and normal skin was not statistically significant: 46.5 ± 19.4 and 35.2 ± 27.0 MPa, respectively. In conclusion, the anisotropic controlled rate self-inflating tissue expander produced a loosely packed collagen network and the fibrils exhibited similar D-banding characteristics as the control group in a sheep model. However, the fibrils from the expanded skin were significantly narrower. The stiffness of the fibrils from the expanded skin was higher but it was not statistically different.

Thermal Destabilization of Collagen Matrix Hierarchical Structure by Freeze/Thaw

This study aims to characterize and understand the effects of freezing on collagen structures and functionality. Specifically, thermodynamic destabilization of collagen at molecular- and fibril-levels by combination of low temperatures and freezing were experimentally characterized using modulated differential scanning calorimetry. In order to delineate the effects of sub-zero temperature and water-ice phase change, we hypothesized that the extent of destabilization can be determined based on post-thaw heat induced thermal denaturation of collagen. It is found that thermal denaturation temperature of collagen in hydrogel decreases by 1.4–1.6°C after freeze/thaw while no such decrease is observed in the case of molecular solution. The destabilization is predominantly due to ice formation. Exposure to low temperatures in the absence of ice has only minimal effect. Calorimetry measurements combined with morphological examination of collagen matrices by scanning electron microscopy suggest that freezing results in destabilization of collagen fibrils due to expansion of intrafibrillar space by ice formation. This fibril-level damage can be alleviated by use of cryoprotectant DMSO at concentrations as low as 0.5 M. A theoretical model explaining the change in collagen post-thaw thermal stability by freezing-induced fibril expansion is also proposed.

Effects of sildenafil on nanostructural and nanomechanical changes in mitochondria in an ischaemia-reperfusion rat model

Sildenafil exerts cardioprotective effects by activating the opening of mitochondrial ATP-sensitive potassium channels to attenuate ischaemia-reperfusion (IR) injury. In the present study, we used atomic force microscopy (AFM) to investigate changes in mitochondrial morphology and properties to assess sildenafil-mediated cardioprotection in a rat myocardial infarction model. To investigate the cardioprotective effects of sildenafil, we used an in vivo Sprague-Dawley rat model of IR. Rats were randomly divided into three groups: (i) sham-operated rats (control; n = 5); (ii) IR-injured rats treated with vehicle (normal saline; IR; n = 10); and (iii) IR-injured rats treated with 0.75 mg/kg, i.p., sildenafil (IR + Sil; n = 10). Morphological and mechanical changes to mitochondria were analysed by AFM. Infarct areas were significantly reduced in sildenafil-treated rats (7.8 ± 3.9% vs 20.4 ± 7.0% in the sildenafil-treated and untreated IR groups, respectively; relative reduction 62%; P < 0.001). Analysis of mitochondria by AFM showed that IR injury significantly increased the areas of isolated mitochondria compared with control (24 150 ± 18 289 vs 1495 ± 1139 nm(2) , respectively; P < 0.001), indicative of mitochondrial swelling. Pretreatment with sildenafil before IR injury reduced the mitochondrial areas (7428 ± 3682 nm(2) ; P < 0.001; relative reduction 69.2% compared with the IR group) and ameliorated the adhesion force of mitochondrial surfaces. Together, these results suggest that sildenafil has cardioprotective effects against IR injury in a rat model by improving the morphological and mechanical characteristics of mitochondria.

Characterization of collagen fibrils after equine suspensory ligament injury: an ultrastructural and biochemical approach

Suspensory ligament (SL) injuries are an important cause of lameness in horses. The mechanical properties of connective tissue in normal and pathological ligaments are mainly related to fibril morphology, as well as collagen content and types. The purpose of this study was to evaluate, using biochemical and ultrastructural approaches, the alterations in collagen fibrils after injury. Eight Warmblood horses with visible signs of injury in only one forelimb SL were selected and specimens were examined by transmission electron microscope (TEM). Collagen types I, III and V were purified by differential salt precipitation after collagen extraction with acetic acid containing pepsin. TEM revealed abnormal organization as well as alterations in the diameter and shape of fibrils after SL injury. The bands corresponding to types I, III and V collagen were assessed by densitometry after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Densitometric analysis indicated that the proportions of type III and type V collagen were higher (P < 0.001) in damaged tissues compared with normal tissues with a mean increase of 20.9% and 17.3%, respectively. Concurrently, a decrease (P < 0.001) in type I collagen within damaged tissues was recorded with a mean decrease of 15.2%. These alterations could be the hallmark of a decrease in the tissue quality and mechanical properties of the ligament. The findings provide new insight for subsequent research on tissue regeneration that may lead to the development of future treatment strategies for SL injury.

Mechanoregulation of stem cell fate via micro-/nano-scale manipulation for regenerative medicine

Recent developments in the field of mechanobiology have renewed the call for a better understanding of the role of mechanical forces as potent regulators and indicators of stem cell fate. Although it is well established that mechanical forces play a crucial role in guiding tissue development, little is known about how submicroscopic biomechanical forces can influence key stem cell behaviors. This review will detail the use of micro-/nano-technologies that are advancing our current understanding of stem cell mechanobiology, and mechanoregulation of stem cell fate using engineered surface topographies and small-scale patterning techniques. The involvement of focal adhesions and the cytoskeleton systems as a common biophysical impetus through which these mechanical signals are transduced via distinct signaling pathways will also be discussed. These insights are envisioned to provide the basis for the rational design of future biocompatible materials and may inspire alternative drug-free therapeutic strategies to manage diseased sites via biomechanical management.

Tendon mechanobiology: experimental models require mathematical underpinning

Mathematical and computational modeling is in demand to help address current challenges in mechanobiology of musculoskeletal tissues. In particular for tendon, the high clinical importance of the tissue, the huge mechanical demands placed on it and its ability to adapt to these demands, require coupled, multiscale models incorporating complex geometrical and microstructural information as well as time-based descriptions of cellular activity and response.This review introduces the information sources required to develop such multiscale models. It covers tissue structure and biomechanics, cell biomechanics, the current understanding of tendon's ability in health and disease to update its properties and structure and the few already existing multiscale mechanobiological models of the tissue. Finally, a sketch is provided of what such models could achieve ideally, pointing out where experimental data and knowledge are still missing.

Fibrillar structure and elasticity of hydrating collagen: a quantitative multiscale approach

It is well known that hydration of collagenous tissues leads to their swelling, as well as to softening of their elastic behavior. However, it is much less clear which microstructural and micromechanical "rules" are involved in this process. Here, we develop a theoretical approach cast in analytical mathematical formulations, which is experimentally validated by a wealth of independent tests on collagenous tissues, such as X-ray diffraction, vacuum drying, mass measurements, and Brillouin light scattering. The overall emerging picture is the following: air-drying leaves water only in the gap zones between the triple-helical collagen molecules; upon re-hydration, the extrafibrillar space is established at volumes directly proportional to the hydration-induced swelling of the (micro) fibrils, until the maximum equatorial distance between the long collagen molecules is reached. Thereafter, the volume of the fibrils stays constant, and only the extrafibrillar volume continues to grow. At all these hydration stages, the elastic behavior is governed by the same, hydration-invariant mechanical interaction pattern of only two, interpenetrating mechanical phases: transversely isotropic molecular collagen and isotropic water (or empty pores in the vacuum-dried case).

Mechanical heterogeneity of dentin at different length scales as determined by AFM phase contrast

In this study we sought to gain insights of the structural and mechanical heterogeneity of dentin at different length scales. We compared four distinct demineralization protocols with respect to their ability to expose the periodic pattern of dentin collagen. Additionally, we analyzed the phase contrast resulting from AFM images obtained in tapping mode to interrogate the viscoelastic behavior and surface adhesion properties of peritubular and intertubular dentin, and partially demineralized dentin collagen fibrils, particularly with respect to their gap and overlap regions. Results demonstrated that all demineralization protocols exposed the gap and overlap zones of dentin collagen fibrils. Phase contrast analyses suggested that the intertubular dentin, where the organic matrix is concentrated, generated a higher phase contrast due a higher contribution of energy dissipation (damping) than the highly mineralized peritubular region. At increasing amplitudes, viscoelasticity appeared to play a more significant contribution to the phase contrast of the images of collagen fibrils. The overlap region yielded a greater phase contrast than the more elastic gap zones. In summary, our results contribute to the perspective that, at different length scales, dentin is constituted of structural features that retain heterogeneous mechanical properties contributing to overall mechanical performance of the tissue. Furthermore, the interpretation of phase contrast from images generated with AFM tapping mode appears to be an effective tool to gain an improved understanding of the structure and property relationship of biological tissues and biomaterials at the micro- and nano-scale.

Effects of extracorporeal shockwave therapy on nanostructural and biomechanical responses in the collagenase-induced Achilles tendinitis animal model

The aim of this study was to quantitatively investigate the effects of extracorporeal shockwave therapy (ESWT) on the nanostructure and adhesion force of collagen fibrils in a rat model of collagenase-induced Achilles tendinitis (CIAT) using histology and atomic force microscopy. A total of 45 rats were divided into experimental groups of three rats each: a control group, 27 CIAT rats with nine time points, and 15 ESWT rats with five time points. Progressive changes in nanostructure including the fibrillary diameter and D-periodicity, and biomechanical properties including the fibrillary adhesion forces in each healing phase were investigated over a 5-week period after collagenase injection. On postoperative day 3, CIAT rats showed granulomatous tissue associated with subacute inflammation, and a deterioration in nanostructure and mechanical properties compared to controls. On postoperative day 12, the ESWT group showed increased vascularity, fibroblastic activity, lymphocyte and plasma cell infiltration, dense histocytes, and disorganization of the fibers compared to the CIAT group. The ESWT group showed and improvement in nanostructure and mechanical properties compared to controls, while the CIAT group showed a deterioration in nanostructure and mechanical properties compared to controls. On postoperative day 26, the ESWT group showed 30% inflamed tissue and 70% fibrotic tissue, while the CIAT group showed chronic inflammation. By the end of the experiments, in both groups the changes had reversed and the tissues were similar in appearance to those in the control group. Following ESWT the deformed and irregular collagen network returned to a well-aligned normal collagen network nanostructure. These results suggest that ESWT may promote the healing response in Achilles tendinitis.

Hydroxylapatite lattice preferred orientation in bone: a study of macaque, human and bovine samples

Hydroxylpatite crystallites in lamellar bone show preferred orientation. In this study, the texture (lattice preferred orientation) of the crystallites in cortical bone samples has been studied by means of synchrotron hard X-ray diffraction, performing a combined analysis with the Rietveld method to quantify fully the preferred orientation features and to obtain lattice and microstructural parameters (such as crystallite size) simultaneously. The samples were ribs from four adult female macaques of different ages, and two femurs chosen for comparison, one from a human child and one from an adult cow. The effect of the preferred orientation of the mineral component on the elastic properties is also briefly discussed. All six samples, averaging volumes of ∼0.5 mm3, show strong preferred orientation, with the hydroxylapatitecaxis parallel to the bone axis. The symmetry of the texture is almost perfectly axial and clearly displays a uniform girdle of theaaxis perpendicular to the bone axis. The texture strength is very similar for the four macaque rib samples, while some variation is observed in the human (weaker) and bovine (stronger) femurs. The crystallite size (8 × 30 nm) and unit-cell lattice parameters are similar in all samples. The Rietveld analysis provides for the first time a quantitative texture analysis combined with structural and microstructural hydroxylapatite analysis of the same bone samples.

Rheology of heterotypic collagen networks

Collagen fibrils are the main structural element of connective tissues. In many tissues, these fibrils contain two fibrillar collagens (types I and V) in a ratio that changes during tissue development, regeneration, and various diseases. Here we investigate the influence of collagen composition on the structure and rheology of networks of purified collagen I and V, combining fluorescence and atomic force microscopy, turbidimetry, and rheometry. We demonstrate that the network stiffness strongly decreases with increasing collagen V content, even though the network structure does not substantially change. We compare the rheological data with theoretical models for rigid polymers and find that the elasticity is dominated by nonaffine deformations. There is no analytical theory describing this regime, hampering a quantitative interpretation of the influence of collagen V. Our findings are relevant for understanding molecular origins of tissue biomechanics and for guiding rational design of collagenous biomaterials for biomedical applications.

Characterization of collagen fibrils films formed on polydimethylsiloxane surfaces for microfluidic applications

Type I collagen fibrillar thin films have been prepared on hydrophobic recovered poly(dimethylsiloxane) (PDMS) surfaces and inside of irreversibly sealed PDMS microfluidic devices. Fibrillar films prepared on PDMS surfaces have been characterized with optical microscopy and atomic force microscopy and compared with films prepared using more traditional bulk methods on thiol-coated gold substrates. Collagen fibril films formed after 18 h of incubation on PDMS surfaces were observed to have similar underlying film thicknesses (15 nm), fibril size (67 nm), fibril coverage (45%), and physiologically supermolecular structure when compared to films on gold substrates. Collagen fibrils formed within devices were also determined to be usable across physiologically relevant cell perfusion rates. To validate the utility of these collagen fibril thin films for cell culture applications, vascular smooth muscle cells are shown to attach to collagen fibrils and exhibit cell spread areas equivalent to those seen on collagen fibrils created via bulk cell culture methods on thiol-coated gold substrates. These results extend the use and benefits of collagen fibril thin films into microfluidic-based cellular studies.

Fibrillogenesis in continuously spun synthetic collagen fiber

The universal structural role of collagen fiber networks has motivated the development of collagen gels, films, coatings, injectables, and other formulations. However, reported synthetic collagen fiber fabrication schemes have either culminated in short, discontinuous fiber segments at unsuitably low production rates, or have incompletely replicated the internal fibrillar structure that dictates fiber mechanical and biological properties. We report a continuous extrusion system with an off-line phosphate buffer incubation step for the manufacture of synthetic collagen fiber. Fiber with a cross-section of 53+ or - 14 by 21 + or - 3 microm and an ultimate tensile strength of 94 + or - 19 MPa was continuously produced at 60 m/hr from an ultrafiltered monomeric collagen solution. The effect of collagen solution concentration, flow rate, and spinneret size on fiber size was investigated. The fiber was further characterized by microdifferential scanning calorimetry, transmission electron microscopy (TEM), second harmonic generation (SHG) analysis, and in a subcutaneous murine implant model. Calorimetry demonstrated stabilization of the collagen triple helical structure, while TEM and SHG revealed a dense, axially aligned D-periodic fibril structure throughout the fiber cross-section. Implantation of glutaraldehyde crosslinked and noncrosslinked fiber in the subcutaneous tissue of mice demonstrated limited inflammatory response and biodegradation after a 6-week implant period.

Deformation micromechanisms of collagen fibrils under uniaxial tension

Collagen, an essential building block of connective tissues, possesses useful mechanical properties due to its hierarchical structure. However, little is known about the mechanical properties of collagen fibril, an intermediate structure between the collagen molecule and connective tissue. Here, we report the results of systematic molecular dynamics simulations to probe the mechanical response of initially unflawed finite size collagen fibrils subjected to uniaxial tension. The observed deformation mechanisms, associated with rupture and sliding of tropocollagen molecules, are strongly influenced by fibril length, width and cross-linking density. Fibrils containing more than approximately 10 molecules along their length and across their width behave as representative volume elements and exhibit brittle fracture. Shorter fibrils experience a more graceful ductile-like failure. An analytical model is constructed and the results of the molecular modelling are used to find curve-fitted expressions for yield stress, yield strain and fracture strain as functions of fibril structural parameters. Our results for the first time elucidate the size dependence of mechanical failure properties of collagen fibrils. The associated molecular deformation mechanisms allow the full power of traditional material and structural engineering theory to be applied to our understanding of the normal and pathological mechanical behaviours of collagenous tissues under load.

Second harmonic generation imaging as a potential tool for staging pregnancy and predicting preterm birth

We use second harmonic generation (SHG) microscopy to assess changes in collagen structure of murine cervix during cervical remodeling of normal pregnancy and in a preterm birth model. Visual inspection of SHG images revealed substantial changes in collagen morphology throughout normal gestation. SHG images collected in both the forward and backward directions were analyzed quantitatively for changes in overall mean intensity, forward to backward intensity ratio, collagen fiber size, and porosity. Changes in mean SHG intensity and intensity ratio take place in early pregnancy, suggesting that submicroscopic changes in collagen fibril size and arrangement occur before macroscopic changes become evident. Fiber size progressively increased from early to late pregnancy, while pores between collagen fibers became larger and farther apart. Analysis of collagen features in premature cervical remodeling show that changes in collagen structure are dissimilar from normal remodeling. The ability to quantify multiple morphological features of collagen that characterize normal cervical remodeling and distinguish abnormal remodeling in preterm birth models supports future studies aimed at development of SHG endoscopic devices for clinical assessment of collagen changes during pregnancy in women and for predicting risk of preterm labor which occurs in 12.5% of all pregnancies.

An engineering, multiscale constitutive model for fiber-forming collagen in tension

This work proposes a nonlinear constitutive model for a single collagen fiber. Fiber-forming collagen can exhibit different hierarchies of basic units, called fascicles, bundles, fibrils, microfibrils, and so forth, down to the molecular (tropocollagen) level. Exploiting the fact that at each hierarchy level the microstructure can be seen, at least approximately, as that of a wavy, or crimped, extensible cable, the proposed stress-strain model considers a given number of levels, each of which contributes to the overall mechanical behavior according to its own geometrical features (crimp, or waviness), as well as to the basic mechanical properties of the tropocollagen. The crimp features at all levels are assumed to be random variables, whose statistical integration furnishes a stress-strain curve for a collagen fiber. The soundness of this model-the first, to the Authors' knowledge, to treat a single collagen fiber as a microstructured nonlinear structural element-is checked by its application to collagen fibers for which experimental results are available: rat tail tendon, periodontal ligament, and engineered ones. Here, no attempt is made to obtain a stress-strain law for generic collagenous tissues, which exhibit specific features, often much more complex than those of a single fiber. However, it is trivial to observe that the availability of a sound, microstructurally based constitutive law for a single collagen fiber (but applicable at any sub-level, or to any other material with a similar microstructure) is essential for assembling complex constitutive models for any collagenous fibrous tissue.

Tendon and ligament fibrillar crimps give rise to left-handed helices of collagen fibrils in both planar and helical crimps

Collagen fibres in tendons and ligaments run straight but in some regions they show crimps which disappear or appear more flattened during the initial elongation of tissues. Each crimp is formed of collagen fibrils showing knots or fibrillar crimps at the crimp top angle. The present study analyzes by polarized light microscopy, scanning electron microscopy, transmission electron microscopy the 3D morphology of fibrillar crimp in tendons and ligaments of rat demonstrating that each fibril in the fibrillar region always twists leftwards changing the plane of running and sharply bends modifying the course on a new plane. The morphology of fibrillar crimp in stretched tendons fulfills the mechanical role of the fibrillar crimp acting as a particular knot/biological hinge in absorbing tension forces during fibril strengthening and recoiling collagen fibres when stretching is removed. The left-handed path of fibrils in the fibrillar crimp region gives rise to left-handed fibril helices observed both in isolated fibrils and sections of different tendons and ligaments (flexor digitorum profundus muscle tendon, Achilles tendon, tail tendon, patellar ligament and medial collateral ligament of the knee). The left-handed path of fibrils represents a new final suprafibrillar level of the alternating handedness which was previously described only from the molecular to the microfibrillar level. When the width of the twisting angle in the fibrillar crimp is nearly 180 degrees the fibrils appear as left-handed flattened helices forming crimped collagen fibres previously described as planar crimps. When fibrils twist with different subsequent rotational angles (< 180 degrees ) they always assume a left-helical course but, running in many different nonplanar planes, they form wider helical crimped fibres.

Nanomechanical heterogeneity in the gap and overlap regions of type I collagen fibrils with implications for bone heterogeneity

The microstructure of type I collagen, consisting of alternating gap and overlap regions with a characteristic D period of approximately 67 nm, enables multifunctionalities of collagen fibrils in different tissues. Implementing near-surface dynamic and static nanoindentation techniques with atomic force microscope, we reveal mechanical heterogeneity along the axial direction of a single isolated collagen fibril from tendon and show that, within the D period, the gap and overlap regions have significantly different elastic and energy dissipation properties, correlating the significantly different molecular structures in these two regions. We further show that such subfibrillar heterogeneity holds in collagen fibrils inside bone and might be intrinsically related to the excellent energy dissipation performance of bone.

Characterization of collagenous matrix assembly in a chondrocyte model system

Collagen is a major component of the newly synthesized pericellular microenvironment of chondrocytes. Collagen types II, IX, and XI are synthesized and assembled into higher ordered complexes by a mechanism in which type XI collagen plays a role in nucleation of new fibrils, and in limiting fibril diameter. This study utilizes a cell line derived from the Swarm rat chondrosarcoma that allows the accumulation and assembly of pericellular matrix. Immunofluorescence and atomic force microscopy were used to assess early intermediates of fibril formation. Results indicate that this cell line synthesizes and secretes chondrocyte-specific pericellular matrix molecules including types II, IX, and XI collagen and is suitable for the study of newly synthesized collagen matrix under the experimental conditions used. AFM data indicate that small fibrils or assemblies of microfibrils are detectable and may represent precursors of the approximately 20 nm thin fibrils reported in cartilage. Treatment with hyaluronidase indicates that the dimensions of the small fibrils may be dependent upon the presence of hyaluronan within the matrix. This study provides information on the composition and organization of the newly synthesized extracellular matrix that plays a role in establishing the material properties and performance of biological materials such as cartilage.

Liquid crystalline collagen: a self-assembled morphology for the orientation of mammalian cells

We report the creation of collagen films having a cholesteric banding structure with an orientation that can be systematically controlled. The action of hydrodynamic flow and rapid desiccation was used to influence the orientation of collagen fibrils, producing a film with a twisted plywood architecture. Adult human fibroblasts cultured on these substrates orient in the direction of the flow deposition, and filopodia are extended onto individual bands. Atomic force microscopy reveals the assembly of 30 nm collagen fibrils into the uniform cholesteric collagen films with a periodic surface relief. The generation of collagen with a reticular, "basket-weave" morphology when using lower concentrations is also discussed.

In vivo, pixel-resolution mapping of thick filaments' orientation in nonfibrilar muscle using polarization-sensitive second harmonic generation microscopy

The polarization dependence of second harmonic generation (SHG) microscopy is used to uncover structural information in different muscle cells in a living Caenorhabditis elegans (C. elegans) nematode. This is done by using a generalized biophysical model in which element ratios for the associated second-order nonlinear tensor and angular orientations for thick filaments are retrieved using a pixel-by-pixel fitting algorithm. As a result, multiple arbitrary orientations of thick filaments, at the pixel-resolution level, are revealed in the same image. The validity of our method is first corroborated in well-organized thick filaments such as the nonfibrilar body wall muscles. Next, a region of the nonstriated muscular cells of the pharynx is analyzed by showing different regions with homogenous orientations of thick filament as well as their radial distribution. As a result, different sets of the nonstriated muscle cell groups in the pharynx of this nematode were exposed. This methodology is presented as a filtering mechanism to uncover biological information unreachable by common intensity SHG microscopy. Finally, a method to experimentally retrieve the distribution of the effective orientation of active SHG molecules is proposed and tested.

Nanoscale scraping and dissection of collagen fibrils

The main function of collagen is mechanical, hence there is a fundamental scientific interest in experimentally investigating the mechanical and structural properties of collagen fibrils on the nanometre scale. Here, we present a novel atomic force microscopy (AFM) based scraping technique that can dissect the outer layer of a biological specimen. Applied to individual collagen fibrils, the technique was successfully used to expose the fibril core and reveal the presence of a D-banding-like structure. AFM nanoindentation measurements of fibril shell and core indicated no significant differences in mechanical properties such as stiffness (reduced modulus), hardness, adhesion and adhesion work. This suggests that collagen fibrils are mechanically homogeneous structures. The scraping technique can be applied to other biological specimens, as demonstrated on the example of bacteria.

Second-harmonic generation in collagen as a potential cancer diagnostic parameter

The fibrillar collagen network in tumor and normal tissues is different due to remodeling of the extracellular matrix during the malignant process. Collagen type I fibers have the crystalline and noncentrosymmetric properties required for generating the second-harmonic signal. The content and structure of collagen were studied by imaging the second-harmonic generation (SHG) signal in frozen sections from three tumor tissues, osteosarcoma, breast carcinoma, and melanoma, and were compared with corresponding normal tissues, bone/femur, breast, and dermis/skin. The collagen density was measured as the percentage of pixels containing SHG signal in tissue images, and material parameters such as the second-order nonlinear optical susceptibility given by the d22 coefficient and an empirical anisotropy parameter were used to characterize the collagen structure. Generally, normal tissues had much more collagen than tumor tissues. In tumor tissues, a cap of collagen was seen at the periphery, and further into the tumors, the distribution of collagen was sparse and heterogeneous. The difference in structure was reflected in the two times higher d22 coefficient and lower anisotropy values in normal tissues compared with tumor tissues. Together, the differences in the collagen content, distribution, and structure show that collagen signature is a promising diagnostic marker.

Electron holography of biological samples

In this paper, we summarise the development of off-axis electron holography on biological samples starting in 1986 with the first results on ferritin from the group of Tonomura. In the middle of the 1990s strong interest was evoked, but then stagnation took place because the results obtained at that stage did not reach the contrast and the resolution achieved by conventional electron microscopy. To date, there exist only a few ( approximately 12) publications on electron holography of biological objects, thus this topic is quite small and concise. The reason for this could be that holography is mostly established in materials science by physicists. Therefore, applications for off-axis holography were powerfully pushed forward in the area of imaging, e.g. electric or magnetic micro- and nanofields. Unstained biological systems investigated by means of off-axis electron holography up to now are ferritin, tobacco mosaic virus, a bacterial flagellum, T5 bacteriophage virus, hexagonal packed intermediate layer of bacteria and the Semliki Forest virus. New results of the authors on collagen fibres and surface layer of bacteria, the so-called S-layer 2D crystal lattice are presented in this review. For the sake of completeness, we will shortly discuss in-line holography of biological samples and off-axis holography of materials related to biological systems, such as biomaterial composites or magnetotactic bacteria.