In vitro calibration of the equilibrium reactions of the metallochromic indicator dye antipyrylazo III with calcium

Metal binding to ligands: Cadmium complexes with glutathione revisited

We studied the interaction of gamma-L-glutamyl-L-cysteinyl-glycine (glutathione, GSH) with cadmium ions (Cd(2+)) by first performing classical potentiometric pH titration measurements and then turning to additional spectroscopic methods. To estimate the residual concentrations of free cadmium, we studied the competition of glutathione with a Cd(2+)-sensitive dye, either an absorbing dye (murexide) or a fluorescent one (FluoZin-1), and consistent results were obtained with the two dyes. In KCl-containing Tes, Mops, or Tris buffer at pH 7.0 to 7.1 and 37 degrees C (and at a total Cd(2+) concentration of 0.01 mM), results suggest that free cadmium concentration is halved when the concentration of glutathione is approximately 0.05 mM; this mainly reflects the combined apparent dissociation constant for the Cd(glutathione) 1:1 complex under these conditions. To identify the other complexes formed, we used far-UV spectroscopy of the ligand-to-metal charge transfer absorption bands. The Cd(glutathione)(2) 1:2 complex predominated over the 1:1 complex only at high millimolar concentrations of total glutathione and not at low submillimolar concentrations of total glutathione. The apparent conditional constants derived from these spectroscopy results made it possible to discriminate between sets of absolute constants that would otherwise have simulated the pH titration data similarly well in this complicated system. Related experiments showed that although the Cl(-) ions in our media competed (modestly) with glutathione for binding to Cd(2+), the buffers we had chosen did not bind Cd(2+) significantly under our conditions. Our experiments also revealed that Cd(2+) may be adsorbed onto quartz or glass vessel walls, reducing the accuracy of theoretical predictions of the concentrations of species in solution. Lastly, the experiments confirmed the rapid kinetics of formation and dissociation of the UV-absorbing Cd(glutathione)(2) 1:2 complexes. The methods described here may be useful for biochemists needing to determine conditional binding constants for charge transfer metal-ligand complexes under their own conditions.

Principal component analysis of the absorption and resonance Raman spectra of the metallochromic indicator antipyrylazo III

Metallochromic indicators, whose spectral properties are changed in the presence of metal cations, are used mainly in biological studies to monitor Ca2+ and Mg2+ ions. Antipyrylazo III is such indicator, employed for mid-range Ca2+ concentrations (10-1000 microM). The stoichiometry of the interactions of antipyrylazo III with Ca2+, Mg2+, Ba2+, Sr2+ and Zn2+ ions and the relevant binding constants were studied by principal component analysis (PCA) of the absorption spectral changes. The resonance Raman spectra of the above systems were measured as well, and the resolved Raman spectra of the various species were calculated and assigned. The vibrational spectra are more featured, more characteristic of the binding ions and exhibit stronger relative spectral changes upon binding the cations. The basis sets of Raman spectra could thus be used as an analytical tool for these divalent metallic cations.

A microspectrophotometric study on the physicochemical properties of antipyrylazo III injected into rat myoballs for measuring free magnesium ion

The accurate measurement of the intracellular concentration of free magnesium ions ([Mg2+]i) is essential for evaluating the role of Mg2+ in cellular functions. Among the specific (compared to fluorescent indicators) metallochromic dyes, antipyrylazo III (APIII) appears to be most suitable for measuring such concentrations in vertebrate cells according to in vitro studies. In this work, the intracellular physicochemical properties of APIII as a Mg2+ indicator were investigated in the cultured rat myoball by means of a microspectrophotometric technique, in order to obtain an accurate measurement of [Mg2+]i. A set of intracellular APIII-Mg2+ calibration spectra was established after permeabilization of the cell membrane with saponin. In comparison with recordings obtained in K+ solutions, the APIII absorption spectra recorded on a myoball exhibited a red shift and an overall change in absorbance, similar to that observed in a protein (bovine serum albumin: BSA) solution. The apparent dissociation constant of APIII for Mg2+ in the myoplasm was found to be 3.16 mM, significantly higher than the 1.86 mM measured in K+ solutions at the same pH (7.35). A stoichiometric ratio of 1:1 was found, however, both in solution and in the myoplasm. In addition, the injected APIII significantly affected the [Mg2+]i of myoballs. The [Mg2+]i was found to be 0.9+/-0.18 mM in 85 myoballs, on the basis of the intracellular calibration spectra obtained at the same myoplasmic APIII concentration ( approximately 2.5 mM), and after correction for the perturbing effect of the dye. It is concluded that an intracellular calibration and recording of whole spectrum are essential for proper interpretations of intracellular dye signals.

Excitation-contraction coupling in intact frog skeletal muscle fibers injected with mmolar concentrations of fura-2

Experiments were carried out to test the hypothesis that mM concentrations of fura-2, a high-affinity Ca2+ buffer, inhibit the release of Ca2+ from the sarcoplasmic reticulum (SR) of skeletal muscle fibers. Intact twitch fibers from frog muscle, stretched to a long sarcomere length and pressure-injected with fura-2, were activated by an action potential. Fura-2's absorbance and fluorescence signals were measured at different distances from the site of fura-2 injection; thus, the myoplasmic free Ca2+ transient (delta [Ca2+]) and the amount and rate of SR Ca2+ release could be estimated at different myoplasmic concentrations of fura-2 ([fura-2T]). At [fura-2T] = 2-3 mM, the amplitude and half-width of delta [Ca2+] were reduced to approximately 25% of the values measured at [fura-2T] less than 0.15 mM, whereas the amount and rate of SR Ca2+ release were enhanced by approximately 50% (n = 5; 16 degrees C). Similar results were observed in experiments carried out at low temperature (n = 2; 8.5-10.5 degrees C). The finding of an enhanced rate of Ca2+ release at 2-3 mM [fura-2T] is opposite to that reported by Jacquemond et al. (Jacquemond, V., L. Csernoch, M. G. Klein, and M. F. Schneider. 1991. Biophys. J. 60:867-873) from analogous experiments carried out on cut fibers. In two experiments involving the injection of larger amounts of fura-2, reductions in SR Ca2+ release were observed; however, we were unable to decide whether these reductions were due to [fura-2T] or to some nonspecific effect of the injection itself. These experiments do, however, suggest that if large [fura-2T] inhibits SR Ca2+ release in intact fibers, [fura-2T] must exceed 6 mM to produce an effect comparable to that reported by Jacquemond et al. in cut fibers. Our clear experimental result that 2-3 mM [fura-2T] enhances SR Ca2+ release supports the proposal that delta [Ca2+] triggered by an action potential normally feeds back to inhibit further release of Ca2+ from the SR (Baylor, S.M., and S. Hollingworth. 1988. J. Physiol. [Lond.]. 403:151-192). Our results provide no support for the hypothesis that Ca(2+)-induced Ca2+ release plays a significant role in excitation-contraction coupling in amphibian skeletal muscle.

Calcium-induced inactivation of calcium release from the sarcoplasmic reticulum of skeletal muscle

The ability of myofilament space Ca2+ to modulate Ca2+ release from the sarcoplasmic reticulum (SR) of skeletal muscle was investigated. Single fibers of the frog Rana pipiens belindieri were manually skinned (sarcolemma removed). Following a standard load and pre-incubation in varying myoplasmic Ca2+ concentrations, SR Ca2+ release was initiated by caffeine. Ca2+ release rates were calculated from the changes in absorbance of a Ca2+ sensitive dye, antipyrylazo III. An apparent dissociation constant (Kd) for dye-Ca2+ binding of 8000 microM 2 was determined by comparing the buffering action of the dye with that of ethylenebis(oxonitrilo)tetraacetate (EGTA) using the contractile proteins of the skinned fiber as a measure of free Ca2+. This value for Kd was used in the calculation of Ca2+ release rates. As the myoplasmic space Ca2+ was increased from pCa 7.4, Ca2+ release rates declined sharply such that at pCa 6.9 the calculated release rate was 72 +/- 3% (mean +/- SEM) of control (pCa 8.4). Further increases in myoplasmic Ca2+ from pCa 6.9 to pCa 6.1 did not result in a further decline in release rate. The effect of a decreased driving force on Ca2+ ions was investigated to determine whether it could account for the change in release rates observed. At pCa 6.9, where the greatest degree of inactivation occurred, the measured effects of a change in driving force could account for at most 40% of the observed inactivation. Varying concentrations of Ba2+ and Sr2+ in the myofilament space had no inactivating effect on the SR Ca2+ release rates. The ability of myofilament Ca2+ to inhibit SR Ca2+ release at concentrations normally encountered during muscle activation suggests a role for released Ca2+ as a modulator of the SR Ca2+ channel.

Myoplasmic calcium transients in intact frog skeletal muscle fibers monitored with the fluorescent indicator furaptra

Furaptra (Raju, B., E. Murphy, L. A. Levy, R. D. Hall, and R. E. London. 1989. Am. J. Physiol. 256:C540-C548) is a "tri-carboxylate" fluorescent indicator with a chromophore group similar to that of fura-2 (Grynkiewicz, G., M. Poenie, and R. Y. Tsien. 1985. J. Biol. Chem. 260:3440-3450). In vitro calibrations indicate that furaptra reacts with Ca2+ and Mg2+ with 1:1 stoichiometry, with dissociation constants of 44 microM and 5.3 mM, respectively (16-17 degrees C; ionic strength, 0.15 M; pH, 7.0). Thus, in a frog skeletal muscle fiber stimulated electrically, the indicator is expected to respond to the change in myoplasmic free [Ca2+] (delta[Ca2+]) with little interference from changes in myoplasmic free [Mg2+]. The apparent longitudinal diffusion constant of furaptra in myoplasm was found to be 0.68 (+/- 0.02, SEM) x 10(-6) cm2 s-1 (16-16.5 degrees C), a value which suggests that about half of the indicator was bound to myoplasmic constituents of large molecular weight. Muscle membranes (surface and/or transverse-tubular) appear to have some permeability to furaptra, as the total quantity of indicator contained within a fiber decreased after injection; the average time constant of the loss was 302 (+/- 145, SEM) min. In fibers containing less than 0.5 mM furaptra and stimulated by a single action potential, the calibrated peak value of delta[Ca2+] averaged 5.1 (+/- 0.3, SEM) microM. This value is about half that reported in the preceding paper (9.4 microM; Konishi, M., and S. M. Baylor. 1991. J. Gen. Physiol. 97:245-270) for fibers injected with purpurate-diacetic acid (PDAA). The latter difference may be explained, at least in part, by the likelihood that the effective dissociation constant of furaptra for Ca2+ is larger in vivo than in vitro, owing to the binding of the indicator to myoplasmic constituents. The time course of furaptra's delta[Ca2+], with average values (+/- SEM) for time to peak and half-width of 6.3 (+/- 0.1) and 9.5 (+/- 0.4) ms, respectively, is very similar to that of delta[Ca2+] recorded with PDAA. Since furaptra's delta[Ca2+] can be recorded at a single excitation wavelength (e.g., 420 nm) with little interference from fiber intrinsic changes, movement artifacts, or delta[Mg2+], furaptra represents a useful myoplasmic Ca2+ indicator, with properties complementary to those of other available indicators.

Myoplasmic calcium transients monitored with purpurate indicator dyes injected into intact frog skeletal muscle fibers

Intact single twitch fibers from frog muscle were studied on an optical bench apparatus after microinjection with tetramethylmurexide (TMX) or purpurate-3,3' diacetic acid (PDAA), two compounds from the purpurate family of absorbance Ca2+ indicators previously used in cut muscle fibers (Maylie, J., M. Irving, N. L. Sizto, G. Boyarsky, and W. K. Chandler. 1987. J. Gen. Physiol. 89:145-176; Hirota, A., W. K. Chandler, P. L. Southwick, and A. S. Waggoner. 1989. J. Gen. Physiol. 94:597-631.) The apparent longitudinal diffusion constant of PDAA (mol wt 380) in myoplasm was 0.99 (+/- 0.04, SEM) x 10(-6) cm2 s-1 (16-17 degrees C), a value which suggests that 24-43% of the PDAA molecules were bound to myoplasmic constituents of large molecular weight. The corresponding values for TMX (mol wt 322) were 0.98 (+/- 0.05) x 10(-6) cm2 s-1 and 44-50%, respectively. Muscle membranes (surface and/or transverse-tubular) appear to be permeable to TMX and, to a lesser extent, to PDAA, since the total amount of indicator contained within a fiber decreased with time after injection. The average time constants for disappearance of indicator were 46 (+/- 7, SEM) min for TMX and 338 (+/- 82) min for PDAA. The fraction of indicator in the Ca2(+)-bound state in resting fibers was significantly different from zero for TMX (0.070 +/- 0.008) but not for PDAA (0.026 +/- 0.009). In in vitro calibrations PDAA but not TMX appeared to react with Ca2+ with 1:1 stoichiometry. In agreement with Hirota et al. (Hirota, A., W. K. Chandler, P. L. Southwick, and A. S. Waggoner. 1989. J. Gen. Physiol. 94:597-631), we conclude that PDAA is probably a more reliable myoplasmic Ca2+ indicator than TMX. In fibers that contained PDAA and were stimulated by a single action potential, the calibrated peak value of the myoplasmic free [Ca2+] transient (delta[Ca2+]) averaged 9.4 (+/- 0.6) microM, a value about fivefold larger than that calibrated with antipyrylazo III under otherwise identical conditions (Baylor, S. M., and S. Hollingworth. 1988. J. Physiol. 403:151-192). The fivefold difference is similar to that previously reported in cut fibers with antipyrylazo III and PDAA. Since in both intact and cut fibers the percentage of PDAA bound to myoplasmic constituents is considerably smaller than that found for antipyrylazo III, the PDAA calibration of delta[Ca2+] is likely to be more accurate. Interestingly, in intact fibers the peak value of delta[Ca2+] calibrated with either PDAA or antipyrylazo III is about half that calibrated in cut fibers.(ABSTRACT TRUNCATED AT 400 WORDS)

Kinetics of calcium binding to fluo-3 determined by stopped-flow fluorescence

The kinetics of Ca2+ dissociation from fluo-3 was measured using stopped flow fluorimetry. Analysis of dissociation revealed, in contrast to other commonly used fluorescent Ca2+ indicators, a biexponential behaviour with two distinct dissociation rates of 550 s-1 and 200 s-1 at physiological pH and room temperature. The dissociation rate constant of the fast phase increases to 700 s-1 at physiological temperature, whereas that of the slow phase does not change markedly. While the rate constants do not depend on pH between 6.6 and 7.8, the dissociation turns out to be monoexponential at pH 5.86. The association rate of Ca2+ to fluo-3 could not be measured within the mixing dead time and is estimated to be above 10(9) M-1 s-1. Since the rate constants of fluo-3 are larger than those of other fluorescent Ca2+ indicators, fluo-3 is well suited for investigations of Ca2+ oscillations in biological systems.

Simultaneous monitoring of changes in magnesium and calcium concentrations in frog cut twitch fibers containing antipyrylazo III

Antipyrylazo III was introduced into frog cut twitch fibers (17-19 degrees C) by diffusion. After action potential stimulation, the change in indicator absorbance could be resolved into two components that had different time courses and wavelength dependences. The first component was early and transient and due to an increase in myoplasmic free [Ca] (Maylie, J., M. Irving, N.L. Sizto, and W.K. Chandler, 1987, Journal of General Physiology, 89:83-143). The second component, usually measured at 590 nm (near the isosbestic wavelength for Ca), developed later than the Ca transient and returned towards baseline about 100 times more slowly. Although the wavelength dependence of this component is consistent with an increase in either free [Mg] or pH, its time course is clearly different from that of the signals obtained with the pH indicators phenol red and 4',5'-dimethyl-5-(and -6-) carboxyfluorescein, suggesting that it is mainly due to an increase in free [Mg]. After a single action potential in freshly prepared cut fibers that contained 0.3 mM antipyrylazo III, the mean peak amplitude of delta A (590) would correspond to an increase in free [Mg] of 47 microM if all the signal were due to a change in [Mg] and all the intracellular indicator reacted with Mg as in cuvette calibrations. With either repetitive action potential stimulation or voltage-clamp depolarization, the delta A (590) signal continued to develop throughout the period when free [Ca] was elevated and then recovered to within 40-90% of the prestimulus baseline with an average rate constant between 0.5 and 1.0 s-1. With prolonged voltage-clamp depolarization, both the amplitude and rate of development of the delta A(590) signal increased with the amplitude of the depolarization and appeared to saturate at levels corresponding to an increase in free [Mg] of 0.8-1.4 mM and a maximum rate constant of 3-4 s-1, respectively. These results are consistent with the idea that the delta A(590) signal is primarily due to changes in myoplasmic free [Mg] produced by a change in the Mg occupancy of the Ca,Mg sites on parvalbumin that results from the Ca transient.

Physiological role and selectivity of the in situ potassium channel of the sarcoplasmic reticulum in skinned frog skeletal muscle fibers

The role of K+ as a counterion during Ca2+ release from the sarcoplasmic reticulum (SR) has been investigated. An optical technique using the Ca2+-sensitive dye antipyrylazo III monitored Ca2+ release from skinned (sarcolemma removed) muscle fibers of the frog. Skinned fibers were used since the removal of the sarcolemma allows direct access to the SR membrane. Releases were stimulated by caffeine, which activates Ca2+ release directly by binding to a receptor on the SR. Two different methods were used to decrease the SR K+ conductance so that its effect on Ca2+ release could be assessed: (a) the SR K+ channel blocker, 1,10-bis-quanidino-n-decane (bisG10) was used to eliminate current pathways and (b) substitution of the impermeant ion choline for K+ was used to decrease charge carriers. Both bisG10 and choline substitution caused a concentration-dependent decrease in the Ca2+ release rate. Therefore we conclude that K+ is an important counterion for Ca2+ during its release from the SR. The selectivity of the in situ SR K+ channel to several monovalent cations was determined by substituting them for K+ and comparing their effect on Ca2+ release. The substituted ions were expected to affect Ca2+ release in proportion to their ability to support a counterion flux, which is, in turn, a function of their relative conductance through the SR K+ channel. The selectivity sequence determined by these experiments was K+ = Rb+ = Na+ greater than Cs+ greater than Li+ greater than choline.

Myoplasmic binding of fura-2 investigated by steady-state fluorescence and absorbance measurements

Binding of the fluorescent Ca2+ indicator dye fura-2 by intracellular constituents has been investigated by steady-state optical measurements. Fura-2's (a) fluorescence intensity, (b) fluorescence emission anisotropy, (c) fluorescence emission spectrum, and (d) absorbance spectra were measured in glass capillary tubes containing solutions of purified myoplasmic proteins; properties b and c were also measured in frog skeletal muscle fibers microinjected with fura-2. The results indicate that more than half, and possibly as much as 85%, of fura-2 molecules in myoplasm are in a protein-bound form, and that the binding changes many properties of the dye. For example, in vitro characterization of the Ca2+-dye reaction indicates that when fura-2 is bound to aldolase (a large and abundant myoplasmic protein), the dissociation constant of the dye for Ca2+ is three- to fourfold larger than that measured in the absence of protein. The problems raised by intracellular binding of fura-2 to cytoplasmic proteins may well apply to cells other than skeletal muscle fibers.

Fura-2 calcium transients in frog skeletal muscle fibres

1. Intact single twitch fibres from frog muscle were mounted at long sarcomere spacing (3.5-4.2 microns) on an optical bench apparatus for the measurement of absorbance and fluorescence signals following the myoplasmic injection of either or both of the Ca2+ indicator dyes Fura-2 and Antipyrylazo III. Dye-related signals were measured at 16-17 degrees C in fibres at rest and stimulated electrically to give a single action potential or brief train of action potentials. 2. The apparent diffusion constant of Fura-2 in myoplasm, Dapp, was estimated from Fura-2 fluorescence measured as a function of time and distance from the site of dye injection. On average (N = 7), Dapp was 0.36 x 10(-6) cm2 s-1, a value nearly 3-fold smaller than expected if all the Fura-2 was freely dissolved in the myoplasmic solution. The small value of Dapp is explained if approximately 60-65% of the Fura-2 molecules were bound to relatively immobile sites in myoplasm. 3. In resting fibres the fraction of Fura-2 in the Ca2+-bound form was estimated to be small, on average (N = 11) 0.06 of total dye. However, because of the large fraction of Fura-2 not freely dissolved in myoplasm, and the indirect method employed for estimating Ca2+-bound dye, calibration of the resting level of myoplasmic free Ca2+ ([Ca2+]) from the fraction of Ca2+-bound dye was not considered reliable. 4. In response to a single action potential, large changes in Fura-2 fluorescence (delta F) and absorbance (delta A) were detected, which had identical time courses. As expected, the directions of these transients corresponded to an increase in Ca2+-dye complex. For wavelengths, lambda, between 380 and 460 nm, peak delta A(lambda) was closely similar to the Ca2+-dye difference spectrum for Fura-2 determined in in vitro calibrations. Beer's law was used to calibrate the concentration of Ca2+-dye complex formed during activity (delta[CaFura-2]) from the delta A(lambda) signal. Peak delta[CaFura-2] was found to vary between 0.01 and 0.4 mM, depending on the total concentration of injected Fura-2 ([Fura-2T]), which ranged as high as 0.9 mM. 5. In fibres in which peak delta[CaFura-2] was less than 0.06 mM, delta[CaFura-2] had a limiting minimal half-width of 50-60 ms. However, as peak delta[CaFura-2] increased (up to 0.3-0.4 mM), delta[CaFura-2] half-width became markedly prolonged (up to 150-200 ms), indicative of a strong buffering action of large concentrations of Fura-2 on the underlying [Ca2+] transient (delta[Ca2+]).(ABSTRACT TRUNCATED AT 400 WORDS)

Simultaneous recording of calcium transients in skeletal muscle using high- and low-affinity calcium indicators

To monitor cytosolic [Ca2+] over a wide range of concentrations in functioning skeletal muscle cells, we have used simultaneously the rapid but relatively low affinity calcium indicator antipyrylazo III (AP III) and the slower but higher affinity indicator fura-2 in single frog twitch fibers cut at both ends and voltage clamped with a double vaseline gap system. When both dyes were added to the end pool solution the cytosolic fura-2 concentration reached a steady level equal to the end pool concentration within approximately 2.5 h, a time when the AP III concentration was still increasing. For depolarizing pulses of increasing amplitude, the fura-2 fluorescence signal approached saturation when the simultaneously recorded AP III absorbance change was far from saturation. Comparison of simultaneously recorded fura-2 and AP III signals indicated that the mean values of the on and off rate constants for calcium binding to fura-2 in 18 muscle fibers were 1.49 x 10(8) M-1 s-1 and 11.9 s-1, respectively (mean KD = 89 nM), if all AP III in the fiber is assumed to behave as in calibrating solution and to be in instantaneous equilibrium with [Ca2+]. [Ca2+] transients calculated from the fura-2 signals using these rate constants were consistent with the [Ca2+] transients calculated from the AP III signals. Resting [Ca2+] or small changes in [Ca2+] which could not be reliably monitored with AP III could be monitored with fura-2 with little or no interference from changes in [Mg2+] or from intrinsic signals. The fura-2 signal was also less sensitive to movement artifacts than the AP III signal. After a [Ca2+] transient the fura-2 signal demonstrated a relatively small elevation of [Ca2+] that was maintained for many seconds.

The kinetics of calcium binding to fura-2 and indo-1

The kinetics of Ca2+ dissociation from fura-2 and indo-1 were measured using a stopped-flow spectrofluorimeter. The dissociation rate constants were 84 s-1 and 130 s-1, respectively, in 0.1 M KC1 at 20 degrees C. The rate constants were insensitive to pH over the range 7.0 to 8.0. The second order association rate constants were estimated indirectly to be in the region of 5 X 10(8) M-1 X s-1 and thus approach the diffusion-controlled limit. The results demonstrate that these new generation indicators are well-suited to measure rapid changes in concentration of intracellular Ca2+.