Cytoplasmic strains and strain rates in motile polymorphonuclear leukocytes

Comparison of Displacement Encoding With Stimulated Echoes to Magnetic Resonance Feature Tracking for the Assessment of Myocardial Strain in Patients With Acute Myocardial Infarction

The aim of this study was to compare myocardial strain by cardiovascular magnetic resonance feature tracking (CMR-FT) to those derived from displacement encoding with stimulated echoes (DENSE) in patients with acute myocardial infarction (AMI). Twenty patients (65 pa13 years) with AMI underwent cine, DENSE, black-blood T2-weighted and late gadolinium enhancement CMR at 1.5 T. Global and segmental strain was determined by CMR-FT analysis and DENSE on matched 3 short-axis planes. Global circumferential strain by CMR-FT showed a good agreement with that by DENSE (r = 0.85, p <0.001; bias 0.02, limits of agreement -0.03 to 0.06). For segmental circumferential strain, r coefficient between CMR-FT and DENSE was 0.61 (p <0.001) with bias of 0.02, limits of agreement of -0.07 to 0.11. Regional circumferential strain determined by CMR-FT in infarct segments (-0.08 ± 0.05) was significantly altered compared with that in remote normal segments (-0.15 ± 0.05, p <0.001). CMR-FT measurement of regional and global circumferential strain showed good agreement with DENSE in patients with AMI.

A Microfluidic System with Surface Patterning for Investigating Cavitation Bubble(s)-Cell Interaction and the Resultant Bioeffects at the Single-cell Level

In this manuscript, we first describe the fabrication protocol of a microfluidic chip, with gold dots and fibronectin-coated regions on the same glass substrate, that precisely controls the generation of tandem bubbles and individual cells patterned nearby with well-defined locations and shapes. We then demonstrate the generation of tandem bubbles by using two pulsed lasers illuminating a pair of gold dots with a few-microsecond time delay. We visualize the bubble-bubble interaction and jet formation by high-speed imaging and characterize the resultant flow field using particle image velocimetry (PIV). Finally, we present some applications of this technique for single cell analysis, including cell membrane poration with macromolecule uptake, localized membrane deformation determined by the displacements of attached integrin-binding beads, and intracellular calcium response from ratiometric imaging. Our results show that a fast and directional jetting flow is produced by the tandem bubble interaction, which can impose a highly localized shear stress on the surface of a cell grown in close proximity. Furthermore, different bioeffects can be induced by altering the strength of the jetting flow by adjusting the standoff distance from the cell to the tandem bubbles.

Cell membrane deformation and bioeffects produced by tandem bubble-induced jetting flow

Cavitation with bubble-bubble interaction is a fundamental feature in therapeutic ultrasound. However, the causal relationships between bubble dynamics, associated flow motion, cell deformation, and resultant bioeffects are not well elucidated. Here, we report an experimental system for tandem bubble (TB; maximum diameter = 50 ± 2 μm) generation, jet formation, and subsequent interaction with single HeLa cells patterned on fibronectin-coated islands (32 × 32 μm) in a microfluidic chip. We have demonstrated that pinpoint membrane poration can be produced at the leading edge of the HeLa cell in standoff distance Sd ≤ 30 μm, driven by the transient shear stress associated with TB-induced jetting flow. The cell membrane deformation associated with a maximum strain rate on the order of 10(4) s(-1) was heterogeneous. The maximum area strain ([Formula: see text]) decreased exponentially with Sd (also influenced by adhesion pattern), a feature that allows us to create distinctly different treatment outcome (i.e., necrosis, repairable poration, or nonporation) in individual cells. More importantly, our results suggest that membrane poration and cell survival are better correlated with area strain integral ([Formula: see text]) instead of [Formula: see text], which is characteristic of the response of materials under high strain-rate loadings. For 50% cell survival the corresponding area strain integral was found to vary in the range of 56 ∼ 123 μs with [Formula: see text] in the range of 57 ∼ 87%. Finally, significant variations in individual cell's response were observed at the same Sd, indicating the potential for using this method to probe mechanotransduction at the single cell level.

Pathogenic Neisseria hitchhike on the uropod of human neutrophils

Polymorphonuclear neutrophils (PMNs) are important components of the human innate immune system and are rapidly recruited at the site of bacterial infection. Despite the effective phagocytic activity of PMNs, Neisseria gonorrhoeae infections are characterized by high survival within PMNs. We reveal a novel type IV pilus-mediated adherence of pathogenic Neisseria to the uropod (the rear) of polarized PMNs. The direct pilus-uropod interaction was visualized by scanning electron microscopy and total internal reflection fluorescence (TIRF) microscopy. We showed that N. meningitidis adhesion to the PMN uropod depended on both pilus-associated proteins PilC1 and PilC2, while N. gonorrhoeae adhesion did not. Bacterial adhesion elicited accumulation of the complement regulator CD46, but not I-domain-containing integrins, beneath the adherent bacterial microcolony. Electrographs and live-cell imaging of PMNs suggested that bacterial adherence to the uropod is followed by internalization into PMNs via the uropod. We also present data showing that pathogenic Neisseria can hitchhike on PMNs to hide from their phagocytic activity as well as to facilitate the spread of the pathogen through the epithelial cell layer.

Biomechanics: cell research and applications for the next decade

With the recent revolution in Molecular Biology and the deciphering of the Human Genome, understanding of the building blocks that comprise living systems has advanced rapidly. We have yet to understand, however, how the physical forces that animate life affect the synthesis, folding, assembly, and function of these molecular building blocks. We are equally uncertain as to how these building blocks interact dynamically to create coupled regulatory networks from which integrative biological behaviors emerge. Here we review recent advances in the field of biomechanics at the cellular and molecular levels, and set forth challenges confronting the field. Living systems work and move as multi-molecular collectives, and in order to understand key aspects of health and disease we must first be able to explain how physical forces and mechanical structures contribute to the active material properties of living cells and tissues, as well as how these forces impact information processing and cellular decision making. Such insights will no doubt inform basic biology and rational engineering of effective new approaches to clinical therapy.

Comparison of cellular strain with applied substrate strain in vitro

Strain magnitudes within tenocytes undergoing substrate tensile strain are not well defined. It was hypothesized that strain magnitudes at the cellular level would reflect those of the applied substrate (equibiaxial or uniaxial) strain. A vacuum-operated device was used to apply equibiaxial or uniaxial tension to a flexible substrate upon which tenocytes were cultured in monolayer. Images of tenocytes labeled with Fura-2, to detect free intracellular calcium ions, and MitoFluor Green, to detect mitochondria, were taken prior to strain and for 20 min during application of static strain. A custom-written, texture correlation program computed strain magnitudes in the cell based on the change in pixel pattern displacements between images of non-strained and strained cells. On average, cellular strain was approximately 37+/-8% and 63+/-11% of the applied equibiaxial and uniaxial substrate strain, respectively. The largest cell strains were detected in cells oriented parallel to the direction of applied uniaxial tensile strain. However, strain magnitudes within a cell were heterogeneous. The variance in strain magnitude within and among tenocytes is dependent on cell orientation, cell stiffness, cytoskeleton organization, subcellular organelles, or placement and type of cell-substrate contacts. Results of the present study indicate that cultured tenocytes experience a moderate fraction of the applied substrate strain.

Mapping mechanical strain of an endogenous cytoskeletal network in living endothelial cells

A central aspect of cellular mechanochemical signaling is a change of cytoskeletal tension upon the imposition of exogenous forces. Here we report measurements of the spatiotemporal distribution of mechanical strain in the intermediate filament cytoskeleton of endothelial cells computed from the relative displacement of endogenous green fluorescent protein (GFP)-vimentin before and after onset of shear stress. Quantitative image analysis permitted computation of the principal values and orientations of Lagrangian strain from 3-D high-resolution fluorescence intensity distributions that described intermediate filament positions. Spatially localized peaks in intermediate filament strain were repositioned after onset of shear stress. The orientation of principal strain indicated that mechanical stretching was induced across cell boundaries. This novel approach for intracellular strain mapping using an endogenous reporter demonstrates force transfer from the lumenal surface throughout the cell.

Specificity of endothelial cell reorientation in response to cyclic mechanical stretching

Evidence suggests that cellular responses to mechanical stimuli depend specifically on the type of stimuli imposed. For example, when subjected to fluid shear stress, endothelial cells align along the flow direction. In contrast, in response to cyclic stretching, cells align away from the stretching direction. However, a few aspects of this cell alignment response remain to be clarified: (1) Is the cell alignment due to actual cell reorientation or selective cell detachment? (2) Does the resulting cell alignment represent a response of the cells to elongation or shortening, or both? (3) Does the cell alignment depend on the stretching magnitude or rate, or both? Finally, the role of the actin cytoskeleton and microtubules in the cell alignment response remains unclear. To address these questions, we grew human aortic endothelial cells on deformable silicone membranes and subjected them to three types of cyclic stretching: simple elongation, pure uniaxial stretching and equi-biaxial stretching. Examination of the same cells before and after stretching revealed that they reoriented. Cells subjected to either simple elongation or pure uniaxial stretching reoriented specifically toward the direction of minimal substrate deformation, even though the directions for the two types of stretching differed by only about 20 degrees. At comparable stretching durations, the extent of cell reorientation was more closely related to the stretching magnitude than the stretching rate. The actin cytoskeleton of the endothelial cell subjected to either type of stretching was reorganized into parallel arrays of actin filaments (i.e., stress fibers) aligned in the direction of the minimal substrate deformation. Furthermore, in response to equi-biaxial stretching, the actin cytoskeleton was remodeled into a "tent-like" structure oriented out of the membrane plane-again towards the direction of the minimal substrate deformation. Finally, abolishing microtubules prevented neither the formation of stress fibers nor cell reorientation. Thus, endothelial cells respond very specifically to the type of deformation imposed upon them.

Orbital response indicates nasal pungency: analysis of biomechanical strain on the skin

Stimulation of the human nasal passage with pungent vapor elicits motor responses in a zone around the eye. This investigation addressed whether quantification of such responses, particularly activity of the orbicularis oculi muscle, could yield a sensitive index of nasal pungency. We placed an array of small, high-contrast targets just beneath the lower eyelid and videotaped their movement to capture deformation of the skin atop the orbicularis oculi during 3 s stimulation with pungent concentrations of ethyl acetate. Eleven subjects participated. Analysis of the movements served to determine mechanical strain, which yielded a single index that we termed 'maximum strain'. This increased with concentration of the vapor and with time during and just after stimulation. Comparison with psychophysical data showed that the strain became evident at concentrations just detectable as pungent. Maximum strain measured on the skin shows promise as an objective index of pungency.

Microplates: a new tool for manipulation and mechanical perturbation of individual cells

We present a new type of microinstrument allowing manipulation and mechanical perturbation of individual cells under an optical microscope. These instruments, which we call microplates, are pulled from rectangular glass bars. They have flat tips, typically 2 microm thick x 20 microm wide, whose specific shape and stiffness can be adjusted through the pulling protocol. After appropriate chemical treatment, microplates can support cell adhesion and/or spreading. Rigid microplates are used to hold cells, whereas more flexible ones serve as stress sensors, i.e. their deflexion is used to probe forces in the range of 1-1000 nN. The main advantages of microplates are their simple geometry and surface properties, and their ability to provide mechanical measurements. In this methodological paper, we give details about microplate preparation and adhesiveness, manipulation set-up, force calibration, and image analysis. Several manipulations have already been carried out on fibroblasts, including uniaxial deformation, micropipet aspiration of adherent cells, and cell-substrate separation. Our results to date provide new insights into the morphology, mechanical properties, and adhesive resistance of cells. Many future applications can be envisaged.

An in vitro traumatic injury model to examine the response of neurons to a hydrodynamically-induced deformation

A novel in vitro system was developed to examine the effects of traumatic mechanical loading on individual cells. The cell shearing injury device (CSID) is a parallel disk viscometer that applies fluid shear stress with variable onset rate. The CSID was used in conjunction with microscopy and biochemical techniques to obtain a quantitative expression of the deformation and functional response of neurons to injury. Analytical and numerical approximations of the shear stress at the bottom disk were compared to determine the contribution of secondary flows. A significant portion of the shear stress was directed in the r-direction during start-up, and therefore the full Navier-Stokes equation was necessary to accurately describe the transient shear stress. When shear stress was applied at a high rate (800 dyne cm-2 sec-1) to cultured neurons, a range of cell membrane strains (0.01 to 0.53) was obtained, suggesting inhomogeneity in cellular response. Functionally, cytosolic calcium and extracellular lactate dehydrogenase levels increased in response to high strain rate (> 1 sec-1) loading, compared with quasistatic (< 1 sec-1) loading. In addition, a subpopulation of the culture subjected to rapid deformation subsequently died. These strain rates are relevant to those shown to occur in traumatic injury, and, as such, the CSID is an appropriate model for studying the biomechanics and pathophysiology of neuronal injury.

Motility and substratum adhesion of Dictyostelium wild-type and cytoskeletal mutant cells: a study by RICM/bright-field double-view image analysis

To investigate the dynamics of cell-substratum adhesion during locomotion, a double-view optical technique and computer-assisted image analysis has been developed which combines reflection interference contrast microscopy (RICM) with bright-field imaging. The simultaneous recording of cell-substratum contact and cell body contour has been applied to aggregation-competent cells of Dictyostelium discoideum. These cells are distinguished from cells at earlier stages of development by small areas of contact to a substratum. Three questions have been addressed in analysing the locomotion of aggregation-competent cells. (1) What is the relationship between changes in the shape of cells and their contact to a substratum during a chemotactic response? (2) What is the relationship between protrusion and retraction of the cell body, and between local attachment and detachment? (3) Are there differences between wild-type and mutant cells that lack certain cytoskeletal proteins? During a chemotactic response the front region of the amoeba can bend towards the gradient of attractant without being supported by its contact with a surface, which excludes the necessity for gradients of adhesion for the response. The finding that in locomoting cells protrusion of the leading edge often precedes retraction establishes a pioneer role for the front region. The finding that gain of contact area precedes loss provides evidence for the coordination of interactions between the cell surface and a substratum. For comparison with wild-type, aggregation-competent triple mutant cells have been used that lack two F-actin crosslinking proteins, alpha-actinin and 120 kDa gelation factor, and an actin filament fragmenting protein, severin. Disturbances in the spatial and temporal control of cytoskeletal activities have been unravelled in the mutant by RICM and quantified by cross-correlation analysis of attachment and detachment vectors. In order to detect these disturbances, it was essential to analyse cell locomotion on the weakly adhesive surface of freshly cleaved mica.

Strain measurements in cultured vascular smooth muscle cells subjected to mechanical deformation

Early work in the field of biomechanics employed rigorous application of the principles of mechanics to the study of the macroscopic structural response of tissues to applied loads. Interest in the functional response of tissues to mechanical stimulation has lead researchers to study the biochemical responses of cells to mechanical loading. Characterization of the experimental system (i.e., specimen geometry and boundary conditions) is no less important on the microscopic scale of the cell than it is for macroscopic tissue testing. We outline a method for appropriate characterization of cell deformation in a cell culture model; describe a system for applying a uniform, isotropic strain field to cells in culture; and demonstrate a dependence of cell deformation on morphology and distribution of adhesion sites. Cultured vascular smooth-muscle cells were mechanically deformed by applying an isotropic strain to the compliant substrate to which they were adhered. The state of strain in the cells was determined by measurement of the displacements of fluorescent microspheres attached to the cell surface. The magnitude and orientation of principal strains were found to vary spatially and temporally and to depend on cell morphology. These results show that cell strain can be highly variable and emphasize the need to characterize both the loading conditions and the actual cellular deformation in this type of experimental model.

Mechanical properties of cytoskeletal polymers

The mechanical properties of cytoplasm are dominated by microfilaments, microtubules, and intermediate filaments, collectively termed the cytoskeleton. This review discusses how the physical properties of these biopolymer systems are related to their molecular structures and interactions, and how remodelling of these biopolymers in vivo affects cell shape and motility.

Leukocyte biophysics. An invited review

The biophysical properties of leukocytes in the passive and active state are discussed. In the passive unstressed state, leukocytes are spherical with numerous membrane folds. Passive leukocytes exhibit viscoelastic properties, and the stress is carried largely by the cell cytoplasm and the nucleus. The membrane is highly deformable in shearing and bending, but resists area expansion. Membrane tension can usually be neglected but plays a role in cases of large deformation when the membrane becomes unfolded. The constant membrane area constraint is a determinant of phagocytic capacity, spreading of cells, and passage through narrow pores. In the active state, leukocytes undergo large internal cytoplasmic deformation, pseudopod projection, and granule redistribution. Several different measurements for assessment of biophysical properties and the internal cytoplasmic deformation in form of strain and strain rate tensors are presented. The current theoretical models for active cytoplasmic motion in leukocytes are discussed in terms of specific macromolecular reactions.