Membrane binding of the colicin E1 channel: activity requires an electrostatic interaction of intermediate magnitude

Familial hemiplegic migraine type 1 mutations W1684R and V1696I alter G protein-mediated regulation of Ca(V)2.1 voltage-gated calcium channels

Familial hemiplegic migraine type 1 (FHM-1) is a monogenic form of migraine with aura that is characterized by recurrent attacks of a typical migraine headache with transient hemiparesis during the aura phase. In a subset of patients, additional symptoms such as epilepsy and cerebellar ataxia are part of the clinical phenotype. FHM-1 is caused by missense mutations in the CACNA1A gene that encodes the pore-forming subunit of Ca(V)2.1 voltage-gated Ca(2+) channels. Although the functional effects of an increasing number of FHM-1 mutations have been characterized, knowledge on the influence of most of these mutations on G protein regulation of channel function is lacking. Here, we explored the effects of G protein-dependent modulation on mutations W1684R and V1696I which cause FHM-1 with and without cerebellar ataxia, respectively. Both mutations were introduced into the human Ca(V)2.1α(1) subunit and their functional consequences investigated after heterologous expression in human embryonic kidney 293 (HEK-293) cells using patch-clamp recordings. When co-expressed along with the human μ-opioid receptor, application of the agonist [d-Ala2, N-MePhe4, Gly-ol]-enkephalin (DAMGO) inhibited currents through both wild-type (WT) and mutant Ca(V)2.1 channels, which is consistent with the known modulation of these channels by G protein-coupled receptors. Prepulse facilitation, which is a way to characterize the relief of direct voltage-dependent G protein regulation, was reduced by both FHM-1 mutations. Moreover, the kinetic analysis of the onset and decay of facilitation showed that the W1684R and V1696I mutations affect the apparent dissociation and reassociation rates of the Gβγ dimer from the channel complex, suggesting that the G protein-Ca(2+) channel affinity may be altered by the mutations. These biophysical studies may shed new light on the pathophysiology underlying FHM-1.

Role of membrane lipids for the activity of pore forming peptides and proteins

Bilayer lipids, far from being passive elements, have multiple roles in polypeptide-dependent pore formation. Lipids participate at all stages of the formation of pores by providing the binding site for proteins and peptides, conditioning their active structure and modulating the molecular reorganization of the membrane complex. Such general functions of lipids superimpose to other particular roles, from electrostatic and curvature effects to more specific actions in cases like cholesterol, sphingolipids or cardiolipin. Pores are natural phenomena in lipid membranes. Driven by membrane fluctuations and packing defects, transient water pores are related to spontaneous lipid flip-flop and non-assisted ion permeation. In the absence ofproteins or peptides, these are rare short living events, with properties dependent on the lipid composition of the membrane. Their frequency increases under conditions of internal membrane disturbance of the lipid packing, like in the presence of membrane-bound proteins or peptides. These latter molecules, in fact, form dynamic supramolecular assemblies together with the lipids and transmembrane pores are one of the possible structures of the complex. Active peptides and proteins can thus be considered inducers or enhancers of pores which increase their probability and lifetime by modifying the thermodynamic membrane balance. This includes destabilizing the membrane lamellar structure, lowering the activation energy for pore formation and stabilizing the open pore structure.

Fluorescence spectroscopy in thermodynamic and kinetic analysis of pH-dependent membrane protein insertion

Experimental determination of the free energy stabilizing the structure of membrane proteins in their native lipid environment is undermined by a lack of appropriate methods and suitable model systems. Here, we demonstrate how fluorescence correlation spectroscopy can be used to characterize thermodynamics of pH-triggered bilayer insertion of nonconstitutive membrane proteins (e.g., bacterial toxins, colicins). The experimental design is guided by the appropriate thermodynamic scheme which considers two independent processes: pH-dependent formation of a membrane-competent form and its insertion into the lipid bilayer. Measurements of a model protein annexin B12 under conditions of lipid saturation demonstrate that protonation leading to the formation of the membrane-competent state occurs near membrane interface. Lipid titration experiments demonstrate that the free energy of transfer to the intermediate interfacial state is especially favorable, while the free energy of final insertion is modulated by interplay of hydrophobic and electrostatic interactions on the bilayer interface. The general principles of kinetic measurements along the insertion pathway containing interfacial intermediate are discussed and practical examples emphasizing appropriate fitting and normalization procedures are presented.

Lipid-mediated inactivation of colicin E1 channels by calcium ions

Based on the model of a toroidal protein-lipid pore, the effect of calcium ions on colicin E1 channel was predicted. In electrophysiological experiments Ca2+ suppressed the activity of colicin E1 channels in membranes formed of diphytanoylphosphatidylglycerol, whereas no desorption of the protein occurred from the membrane surface. The effect of Ca2+ was not observed on membranes formed of diphytanoylphosphatidylcholine. Single-channel measurements revealed that Ca2+-induced reduction of the colicin-induced current across the negatively charged membrane was due to a decrease in the number of open colicin channels and not changes in their properties. In line with the toroidal model, the effect of Ca2+ on the colicin E1 channel-forming activity is explained by alteration of the membrane lipid curvature caused by electrostatic interaction of Ca2+ with negatively charged lipid head groups.

Binding and Folding of Melittin in the Presence of Ganglioside GM1 Micelles

In this work we examine the binding and folding of the membrane-active peptide, melittin in the presence of ganglioside GM1 micelle. The membrane bilayer is capable of inducing folding to small proteins and peptides upon binding. Using two-dimensional NMR techniques we have shown that at low concentration, GM1 micelle is able to induce an extended helical conformation to MLT. The pulsed-field gradient diffusion NMR study indicates that the peptide partition into GM1 micelle along with about 32% binding. While looking for the binding between MLT and GM1 using saturation transfer difference NMR spectroscopy, Val5, Leu9, Thr11, Ile17, Ser18, and Trp19 have been identified as the residues that are in close proximity to GM1 micelles.

On the role of lipid in colicin pore formation

Insights into the protein-membrane interactions by which the C-terminal pore-forming domain of colicins inserts into membranes and forms voltage-gated channels, and the nature of the colicin channel, are provided by data on: (i) the flexible helix-elongated state of the colicin pore-forming domain in the fluid anionic membrane interfacial layer, the optimum anionic surface charge for channel formation, and voltage-gated translocation of charged regions of the colicin domain across the membrane; (ii) structure-function data on the voltage-gated K(+) channel showing translocation of an arginine-rich helical segment through the membrane; (iii) toroidal channels formed by small peptides that involve local participation of anionic lipids in an inverted phase. It is proposed that translocation of the colicin across the membrane occurs through minimization of the Born charging energy for translocation of positively charged basic residues across the lipid bilayer by neutralization with anionic lipid head groups. The resulting pore structure may consist of somewhat short, ca. 16 residues, trans-membrane helices, in a locally thinned membrane, together with surface elements of inverted phase lipid micelles.

Reversible Refolding of the Diphtheria Toxin T-Domain on Lipid Membranes

The catalytic domain of diphtheria toxin (DT) is translocated across endosomal membranes by the T-domain (DTT) in response to acidification. Understanding the energetics of translocation, besides clarifying the mechanism of translocation, should provide insights into general principles of membrane protein stability and assembly. As a first step, we have evaluated the energetics of DTT binding to lipid vesicles using three single-cysteine mutants (L350C, Q369C, and Y280C) labeled with a 7-nitrobenz-2-oxa-1,3-diazol-4-yl (NBD) fluorophore sensitive to polarity changes. Remarkably strong association with the vesicles was detected for all mutants, even at pH 7 at which DTT is believed to be in a fully folded membrane-incompetent state. Lowering the pH in the presence of anionic membranes resulted in a strong but reversible increase in emission of NBD-labeled mutants, consistent with reversible membrane insertion. This reversibility permitted free energies of DTT interactions with vesicles to be determined for the first time. Free energy values for the three mutants ranged from -8 to -10 kcal mol(-1) at pH 4.3 and from -7 to -8 kcal mol(-1) at pH 7. Insights into the disposition of DTT on membranes were obtained using a novel hydropathy analysis that considers the relative free energies of transmembrane and interfacial interactions as a function of pH. This analysis suggests that interactions at the membrane interface dominate pH-triggered insertion of DTT, implying that the folding pathway involves interfacial intermediates.

Chemical and Photochemical Modification of Colicin E1 and Gramicidin A in Bilayer Lipid Membranes

Chemical modification and photodynamic treatment of the colicin E1 channel-forming domain (P178) in vesicular and planar bilayer lipid membranes (BLMs) was used to elucidate the role of tryptophan residues in colicin E1 channel activity. Modification of colicin tryptophan residues by N-bromosuccinimide (NBS), as judged by the loss of tryptophan fluorescence, resulted in complete suppression of wild-type P178 channel activity in BLMs formed from fully saturated (diphytanoyl) phospholipids, both at the macroscopic-current and single-channel levels. The similar effect on both the tryptophan fluorescence and the electric current across BLM was observed also after NBS treatment of gramicidin channels. Of the single-tryptophan P178 mutants studied, W460 showed the highest sensitivity to NBS treatment, pointing to the importance of the water-exposed Trp460 in colicin channel activity. In line with previous work, the photodynamic treatment (illumination with visible light in the presence of a photosensitizer) led to suppression of P178 channel activity in diphytanoyl-phospholipid membranes concomitant with the damage to tryptophan residues detected here by a decrease in tryptophan fluorescence. The present work revealed novel effects: activation of P178 channels as a result of both NBS and photodynamic treatments was observed with BLMs formed from unsaturated (dioleoyl) phospholipids. These phenomena are ascribed to the effect of oxidative modification of double-bond-containing lipids on P178 channel formation. The pronounced stimulation of the colicin-mediated ionic current observed after both pretreatment with NBS and sensitized photomodification of the BLMs support the idea that distortion of membrane structure can facilitate channel formation.

Destabilization of the Colicin E9 Endonuclease Domain by Interaction with Negatively Charged Phospholipids

We have shown previously that the 134-residue endonuclease domain of the bacterial cytotoxin colicin E9 (E9 DNase) forms channels in planar lipid bilayers (Mosbahi, K., Lemaître, C., Keeble, A. H., Mobasheri, H., Morel, B., James, R., Moore, G. R., Lea, E. J., and Kleanthous, C. (2002) Nat. Struct. Biol. 9, 476-484). It was proposed that the E9 DNase mediates its own translocation across the cytoplasmic membrane and that the formation of ion channels is essential to this process. Here we describe changes to the structure and stability of the E9 DNase that accompany interaction of the protein with phospholipid vesicles. Formation of the protein-lipid complex at pH 7.5 resulted in a red-shift of the intrinsic protein fluorescence emission maximum (lambda(max)) from 333 to 346 nm. At pH 4.0, where the E9 DNase lacks tertiary structure but retains secondary structure, DOPG induced a blue-shift in lambda(max), from 354 to 342 nm. Changes in lambda(max) were specific for anionic phospholipid vesicles at both pHs, suggesting electrostatics play a role in this association. The effects of phospholipid were negated by Im9 binding, the high affinity, acidic, exosite inhibitor protein, but not by zinc, which binds at the active site. Fluorescence-quenching experiments further demonstrated that similar protein-phospholipid complexes are formed regardless of whether the E9 DNase is initially in its native conformation. Consistent with these observations, chemical and thermal denaturation data as well as proteolytic susceptibility experiments showed that association with negatively charged phospholipids destabilize the E9 DNase. We suggest that formation of a destabilizing protein-lipid complex pre-empts channel formation by the E9 DNase and constitutes the initial step in its translocation across the Escherichia coli inner membrane.

The molecular basis for the pH-activation mechanism in the channel-forming bacterial colicin E1

The in vitro activity of the channel-forming bacteriocins such as colicin E1 in model membranes requires the specific activation of the protein by an acidic environment in the presence of a membrane potential. Acid activation of the C-terminal domain results in the formation of an insertion-competent intermediate with an enhanced ability to penetrate and perforate cell membranes. We report novel findings of this activation process through the design and study of mutant proteins involving the replacement of conserved Asp residues Asp-408, Asp-410, and Asp-423 within helices 5a and 4 in the colicin E1 channel domain that resulted in enhanced membrane binding, bilayer insertion rates, and ion channel activities at near neutral pH values. This activation process involves the destabilization of a critical salt bridge (Asp-410 and Lys-406) and H-bonds (Asp-408 and Ser-405 main chain; Asp-423 and Lys-420 main chain). The helix-to-coil transition of this motif was identified previously by time-resolved Trp fluorescence measurements (Merrill, A. R., Steer, B. A., Prentice, G. A., Weller, M. J., and Szabo, A. G. (1997) Biochemistry 36, 6874-6884), and here we use this approach to demonstrate that disruption of the helical structure of helices 4 and 5a results in a shift in this equilibrium to favor the coil state. Finally, we show that the essential components of the pH trigger motif are conserved among the channel-forming colicins and that it likely exists within other bacterial proteins and may even have evolved into more sophisticated devices in a number of microbial species.

Determining the membrane topology of proteins: insertion pathway of a transmembrane helix of annexin 12

We describe a sensitive method for determining the bilayer topology of single-site cysteine-linked NBD fluorescent labels on membrane proteins. Based upon a method developed for peptides [W. C. Wimley and S. H. White (2000) Biochemistry 39, 161-170], it utilizes a novel fluorescence quencher, lysoUB, comprised of a single acyl chain attached to a UniBlue chromophore. The enhanced sensitivity of the method arises from the brightness of the NBD fluorescence and the quenching efficiency of lysoUB, which is not fluorescent. In the course of validating the method, we examined the insertion topology of the D-E helical region of repeat 2 of annexin 12, known to adopt a transbilayer orientation at mildly acidic pH [Langen et al. (1998) Proc. Natl. Acad. Sci. USA 95, 14060-14065]. In the final membrane-inserted state, an NBD label attached to the single-cysteine mutant D134C was found to be in the outer (cis) leaflet, while the one attached to D162C was found in the trans leaflet. But kinetic measurements of NBD fluorescence suggested the existence of a transient intermediate insertion state whose lifetime could be increased by increasing the fraction of anionic lipids in the vesicles. Indeed, the lifetime could be increased for times sufficient for the completion of lysoUB-NBD topology measurements. Such measurements revealed that the D-E region adopts an interfacial topology in the intermediate state with both ends on the cis side of the membrane, consistent with the general concept of interface-directed membrane insertion of proteins [White et al. (2001) J. Biol. Chem. 276, 32395-32398].

Colicin crystal structures: pathways and mechanisms for colicin insertion into membranes

The X-ray structures of the channel-forming colicins Ia and N, and endoribonucleolytic colicin E3, as well as of the channel domains of colicins A and E1, and spectroscopic and calorimetric data for intact colicin E1, are discussed in the context of the mechanisms and pathways by which colicins are imported into cells. The extensive helical coiled-coil in the R domain and internal hydrophobic hairpin in the C domain are important features relevant to colicin import and channel formation. The concept of outer membrane translocation mediated by two receptors, one mainly used for initial binding and second for translocation, such as BtuB and TolC, respectively, is discussed. Helix elongation and conformational flexibility are prerequisites for import of soluble toxin-like proteins into membranes. Helix elongation contradicts suggestions that the colicin import involves a molten globule intermediate. The nature of the open-channel structure is discussed.

Tuning the membrane surface potential for efficient toxin import

Membrane surface electrostatic interactions impose structural constraints on imported proteins. An unprecedented sensitive dependence on these constraints was seen in the voltage-gated import and channel formation by the C-terminal pore-forming domain of the bacteriocin, colicin E1. At physiological ionic strengths, significant channel current was observed only in a narrow interval of anionic lipid content ([L-]), with the maximum current (I(max)) at 25-30 mol% (dioleoyl)-phosphatidylglycerol ([L-]max) corresponding to a surface potential of the lipid bilayer in the absence of protein, psi(o)max = -60 +/- 5 mV. Higher ionic strength shifted [L-]max to larger values, but psi(o)max remained approximately constant. It is proposed that the channel current (i) increases and (ii) decreases at /psi(o)/ values <55 mV and >65 mV, because of (i) electrostatic interactions needed for effective insertion of the channel polypeptide and (ii) constraints due to electrostatic forces on the flexibility needed for cooperative insertion into the membrane. The loss of flexibility for /psi(o)/ 65 mV was demonstrated by the absence of thermally induced intraprotein distance changes of the bound polypeptide. The anionic lipid content, 25-30 mol%, corresponding to the channel current maxima, is similar to that of the target Escherichia coli cytoplasmic membrane and membranes of mesophilic microorganisms. This suggests that one reason the membrane surface potential is tuned in vivo is to facilitate protein import.

Tryptophan-dependent sensitized photoinactivation of colicin E1 channels in bilayer lipid membranes

The bacterial toxin colicin E1 is known to induce voltage-gated currents across a planar bilayer lipid membrane. In the present study, it is shown that the colicin-induced current decreased substantially upon illumination of the membrane in the presence of the photosensitizer, aluminum phthalocyanine. This effect was almost completely abolished by the singlet oxygen quencher, sodium azide. Using single tryptophan mutants of colicin E1, Trp495 was identified as the amino acid residue responsible for the sensitized photodamage of the colicin channel activity. Thus, the distinct participation of a specific amino acid residue in the sensitized photoinactivation of a defined protein function was demonstrated. It is suggested that Trp495 is critical for the translocation and/or anchoring of the colicin channel domain in the membrane.

Protein chemistry at membrane interfaces: non-additivity of electrostatic and hydrophobic interactions

Non-specific binding of proteins and peptides to charged membrane interfaces depends upon the combined contributions of hydrophobic (DeltaG(HPhi)) and electrostatic (DeltaG(ES)) free energies. If these are simply additive, then the observed free energy of binding (DeltaG(obs)) will be given by DeltaG(obs)=DeltaG(HPhi)+DeltaG(ES), where DeltaG(HPhi)=-sigma(NP)A(NP) and DeltaG(ES)=zFphi. In these expressions, A(NP) is the non-polar accessible area, sigma(NP) the non-polar solvation parameter, z the formal peptide valence, F the Faraday constant, and phi the membrane surface potential. But several lines of evidence suggest that hydrophobic and electrostatic binding free energies of proteins at membrane interfaces, such as those associated with cell signaling, are not simply additive. In order to explore this issue systematically, we have determined the interfacial partitioning free energies of variants of indolicidin, a cationic proline-rich antimicrobial peptide. The synthesized variants of the 13 residue peptide covered a wide range of hydrophobic free energies, which allowed us to examine the effect of hydrophobicity on electrostatic binding to membranes formed from mixtures of neutral and anionic lipids. Although DeltaG(obs) was always a linear function of DeltaG(HPhi), the slope depended upon anionic lipid content: the slope was 1.0 for pure, zwitterionic phosphocholine bilayers and 0.3 for pure phosphoglycerol membranes. DeltaG(obs) also varied linearly with surface potential, but the slope was smaller than the expected value, zF. As observed by others, this suggests an effective peptide valence z(eff) that is smaller than the formal valence z. Because of our systematic approach, we were able to establish a useful rule-of-thumb: z(eff) is reduced relative to z by about 20 % for each 3 kcal mol(-1) (1 kcal=4.184 kJ) favorable increase in DeltaG(HPhi). For neutral phosphocholine interfaces, we found that DeltaG(obs) could be predicted with remarkable accuracy using the Wimley-White experiment-based interfacial hydrophobicity scale.

Effect of pH on the conformation, interaction with membranes and hemolytic activity of sticholysin II, a pore forming cytolysin from the sea anemone Stichodactyla helianthus

Sticholysin II (St II) is a pore forming cytolysin obtained from the sea anemone Stichodactyla helianthus. Incubation of diluted St II solutions at different pHs (ranging from 2.0 to 12) slightly changes the secondary structure of the protein. These changes are particularly manifested at high pH. Similarly, the intrinsic fluorescence of the protein indicates a progressive opening of the protein structure when the pH increases from acidic (2.0) to basic (12). These modifications are only partially reversible and do not produce any significant increase in the small capacity of the protein to bind hydrophobic dyes (ANS or Prodan). Experiments carried out with model membranes show a reduced capacity of binding to egg phosphatidyl choline:sphingomyelin (1:1) liposomes both at low (2.3) and high (11.5) pH. Preincubation of the protein in the 2. 5-9.0 pH range does not modify its hemolytic activity, measured in human red blood cells at pH 7.4. On the other hand, preincubation at pH 11.5 drastically reduces the hemolytic activity of the toxin. This strong reduction takes place without measurable modification of the toxin ability to be adsorbed to the red blood cell surface. This indicates that preincubation at high pH irreversibly reduces the capacity of the toxin to form pores without a significant decrease in its binding capacity. The present results suggest that at pH > or = 10 St II experiences irreversible conformational changes that notably reduce its biological activity. This reduced biological activity is associated with a partial defolding of the protein, which seems to contradict what is expected in terms of a molten globule formalism.

Measuring pore formation by Bcl-2 family proteins

Two methods for assaying Bcl-2 protein family-induced solute efflux from liposomes have been outlined. They utilize either ion-selective electrodes to follow ion efflux or fluorescence to monitor changes in fluorescence of the liposome-encapsulated dye SPQ or carboxyfluorescein. Both methods provide a simple means of determining protein activity. These methods do not have the capability to detect either single-channel conductivity or ion selectivity, but they indicate whether the bulk of the protein population is inducing solute efflux. Although in in vivo significance of Bcl-2 protein family pore formation remains to be determined, in vitro measurements of channel activity should provide a means to determine whether a given protein preparation has activity and whether mutations have an adverse effect on channel formation.

Structural stability and domain organization of colicin E1

Thermodynamic properties, stability, and structure of the toxin-like molecule colicin E1 were analyzed by differential scanning calorimetry and circular dichroism to determine the number of structurally independent domains, and the interdomain interactions necessary for colicin import into the Escherichia coli cell. Analysis of denaturation profiles of the 522 residue colicin E1, together with fragments of 342 and 178 residues that contain subsets of the domains, showed three stable cooperative blocks that differ in thermal stability and correspond to three major functional domains of the colicin: (i) the COOH-terminal channel-forming (C) domain with the highest thermal stability; (ii) the BtuB receptor binding (R) domain; and (iii) the N-terminal translocation (T) domain that has the smallest stabilization enthalpy and thermal stability. Interdomain interactions were described in which T-R interactions stabilize R, and T-C and R-C interactions stabilize R and T, but destabilize C. The R and T domains behaved in a similar way as a function of pH and ionic strength. Interacting extended helices of the R domain, possibly a coiled-coil, were implied by: (i) the very high (>90%) alpha-helical content of the R domain, (ii) cooperative decreases in alpha-helical content near the T(tr) of thermal denaturation of the R domain; (iii) a large denaturation enthalpy, implying extensive H-bond and van der Waals interactions. The R domain was inferred, from the extended network of interacting helices, large DeltaH, and steep temperature dependence of its stabilization energy to have a dominant role in determining the conformation of other domains. It is proposed that cellular import starts with the R domain binding to the BtuB receptor, followed by unfolding of the R domain coiled-coil and thereby of the T domain, which then interacts with the TolC receptor-translocator.

Unfolding pathway of the colicin E1 channel protein on a membrane surface

The channel-forming domain of colicin E1 is composed of a soluble helical bundle which, upon membrane binding, unfolds to form an extended, two-dimensional helical net in the membrane interfacial layer. To characterize the pathway of unfolding of the protein and the structure of the surface-bound intermediate, the time-course of intra-protein distance changes and unfolding on a millisecond time-scale were determined from the kinetics of changes in the efficiency of fluorescence resonance energy transfer, and of the donor-acceptor overlap integral, between each of six individual tryptophan residues and a Cys-conjugated energy transfer acceptor (C509-AEDANS). Comparison of the rate constants revealed the following order of events associated with unfolding of the protein at the membrane surface: (A) movement of the hydrophobic core helices VIII-IX, coincident with a small change in Trp-Cys509 distances of the outer helices; (B) unfolding of surface helices in the helical bundle in the order: helix I, helices III, IV, VI, VII, and helix V; (C) a slow (time-scale, seconds) condensation of the surface-bound helices. The rate of protein unfolding events increased with increasing anionic lipid content. Unfolding did not occur below the lipid thermal phase transition, indicating that unfolding requires mobility in the interfacial layer. The structure of the two-dimensional membrane-bound intermediate in the steady-state was inferred to consist of a quasi-circular arrangement of eight helices embedded in the membrane interfacial layer and anchored by the hydrophobic helical hairpin. The pathway of unfolding of the colicin channel at the membrane surface, catalyzed by electrostatic and hydrophobic forces, is the first described for a membrane-active protein. It is proposed that the pathway and principles described for the colicin protein are relevant to membrane protein import.

Kinetic description of structural changes linked to membrane import of the colicin E1 channel protein

Upon binding to membranes, the 178-residue colicin E1 C-terminal channel protein forms a steady-state closed-channel intermediate that is a flexible extended two-dimensional helical array [Zakharov et al. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 4282-4287]. Analysis of the kinetics of binding-insertion to liposome membranes of the channel protein, P178, and of changes of spectral parameters associated with structure transitions allowed a correlation of the sequence of tertiary and secondary structure changes with binding-insertion. Binding and insertion were distinguished by use of lipids modified with quenchers of Trp fluorescence attached to lipid headgroups or acyl chains. Secondary and tertiary structure changes were inferred, respectively, from changes in far-UV circular dichroism and relative changes of interresidue distances by fluorescence resonance energy transfer (FRET). "Single Trp" mutants were used in FRET analysis, with the background Tyr contribution determined through use of a "zero Trp" mutant. The sequence of distinguishable events and the pseudo-first-order rate constants under "standard" conditions (large unilamellar vesicles, pH 4.0, I = 0.1 M) was binding (30 +/- 5 s(-)(1)) --> unfolding (12.6 +/- 0.5 s(-)(1)) --> helix elongation (9.0 +/- 1.0 s(-)(1)) --> insertion (6. 6 +/- 0.5 s(-)(1)). Thus, helix elongation on the surface of the membrane can occur after unfolding and does not require insertion. Binding-insertion and structural transitions of P178 occur significantly faster with small unilamellar vesicles. The relevance to general mechanisms of protein import of the structural changes associated with import of the colicin channel is discussed.

Ion-channel-forming colicins

Several features of ion-channel-forming colicins have been illuminated by recent revelations: its four-domain structure, the mechanism and thermodynamics of binding to the gating loop of outer membrane porins, the mechanism of translocation, competition for the transperiplasmic excursion facilitated by the Tol or Ton transperiplasmic proteins, and the formation of a waisted, funnel-shaped transmembrane channel of well-characterized shape.

Membrane-bound state of the colicin E1 channel domain as an extended two-dimensional helical array

Atomic level structures have been determined for the soluble forms of several colicins and toxins, but the structural changes that occur after membrane binding have not been well characterized. Changes occurring in the transition from the soluble to membrane-bound state of the C-terminal 190-residue channel polypeptide of colicin E1 (P190) bound to anionic membranes are described. In the membrane-bound state, the alpha-helical content increases from 60-64% to 80-90%, with a concomitant increase in the average length of the helical segments from 12 to 16 or 17 residues, close to the length required to span the membrane bilayer in the open channel state. The average distance between helical segments is increased and interhelix interactions are weakened, as shown by a major loss of tertiary structure interactions, decreased efficiency of fluorescence resonance energy transfer from an energy donor on helix V of P190 to an acceptor on helix IX, and decreased resonance energy transfer at higher temperatures, not observed in soluble P190, implying freedom of motion of helical segments. Weaker interactions are also shown by a calorimetric thermal transition of low cooperativity, and the extended nature of the helical array is shown by a 3- to 4-fold increase in the average area subtended per molecule to 4,200 A2 on the membrane surface. The latter, with analysis of the heat capacity changes, implies the absence of a developed hydrophobic core in the membrane-bound P190. The membrane interfacial layer thus serves to promote formation of a highly helical extended two-dimensional flexible net. The properties of the membrane-bound state of the colicin channel domain (i.e., hydrophobic anchor, lengthened and loosely coupled alpha-helices, and close association with the membrane interfacial layer) are plausible structural features for the state that is a prerequisite for voltage gating, formation of transmembrane helices, and channel opening.

Solid-state NMR studies of the membrane-bound closed state of the colicin E1 channel domain in lipid bilayers

The colicin E1 channel polypeptide was shown to be organized anisotropically in membranes by solid-state NMR analysis of samples of uniformly 15N-labeled protein in oriented planar phospholipid bilayers. The 190 residue C-terminal colicin E1 channel domain is the largest polypeptide to have been characterized by 15N solid-state NMR spectroscopy in oriented membrane bilayers. The 15N-NMR spectra of the colicin E1 show that: (1) the structure and dynamics are independent of anionic lipid content in both oriented and unoriented samples; (2) assuming the secondary structure of the polypeptide is helical, there are both trans-membrane and in-plane helical segments; (3) trans-membrane helices account for approximately 20-25% of the channel polypeptide, which is equivalent to 38-48 residues of the 190-residue polypeptide. The results of the two-dimensional PISEMA spectrum are interpreted in terms of a single trans-membrane helical hairpin inserted into the bilayer from each channel molecule. These data are also consistent with this helical hairpin being derived from the 38-residue hydrophobic segment near the C-terminus of the colicin E1 channel polypeptide.

Orientational distribution of alpha-helices in the colicin B and E1 channel domains: a one and two dimensional 15N solid-state NMR investigation in uniaxially aligned phospholipid bilayers

Thermolytic fragments of the channel-forming bacterial toxins colicin B and colicin E1 were uniformly labeled with the 15N isotope and reconstituted into uniaxially oriented membranes. These well-aligned samples were investigated by proton-decoupled 15N solid-state NMR spectroscopy at 40.5 and 71.0 MHz. The one dimensional spectra indicate a predominant orientation of the colicin alpha-helices parallel to the bilayer surface but also the presence of a considerable proportion of peptide bonds that align in a transmembrane direction. The orientational distribution of 15N-labeled amide bonds is nearly identical for colicin B and E1, each a representative of a different group of membrane-active colicins. This comparison indicates common structural features of the water-soluble as well as the bilayer-associated proteins. When the pH is lowered, the orientational distribution of amide vectors exhibits only a small shift from in-plane to transmembrane orientations, in agreement with increased affinity and activity of colicins at acidic conditions. The 15N spectral line shape was independent of the bilayer phospholipid composition (100-75 mol % phosphatidylcholine/0-25 mol % phosphatidylglycerol) or the protein-to-lipid ratio in the range 1.7 - 12 wt %. Two dimensional separated local field spectroscopy (PISEMA) resolves almost 200 15N resonances of the colicin B channel protein. Approximately 50 15N signals resonate in a region characteristic of transmembrane helical residues, in strong support of the previously suggested umbrella conformation of the closed colicin channel.

Channel formation by antiapoptotic protein Bcl-2

Bcl-2 is the prototypical member of a large family of apoptosis-regulating proteins, consisting of blockers and promoters of cell death. The three-dimensional structure of a Bcl-2 homologue, Bcl-XL, suggests striking similarity to the pore-forming domains of diphtheria toxin and the bacterial colicins, prompting exploration of whether Bcl-2 is capable of forming pores in lipid membranes. Using chloride efflux from KCl-loaded unilamellar lipid vesicles as an assay, purified recombinant Bcl-2 protein exhibited pore-forming activity with properties similar to those of the bacterial toxins, diphtheria toxin, and colicins, i.e., dependence on low pH and acidic lipid membranes. In contrast, a mutant of Bcl-2 lacking the two core hydrophobic alpha-helices (helices 5 and 6), predicted to be required for membrane insertion and channel formation, produced only nonspecific effects. In planar lipid bilayers, where detection of single channels is possible, Bcl-2 formed discrete ion-conducting, cation-selective channels, whereas the Bcl-2 (Deltah5, 6) mutant did not. The most frequent conductance observed (18 +/- 2 pS in 0.5 M KCl at pH 7.4) is consistent with a four-helix bundle structure arising from Bcl-2 dimers. However, larger channel conductances (41 +/- 2 pS and 90 +/- 10 pS) also were detected with progressively lower occurrence, implying the step-wise formation of larger oligomers of Bcl-2 in membranes. These findings thus provide biophysical evidence that Bcl-2 forms channels in lipid membranes, suggesting a novel function for this antiapoptotic protein.

Transmembrane insertion of the colicin Ia hydrophobic hairpin

Colicin Ia is a bactericidal protein that forms voltage-dependent, ion-conducting channels, both in the inner membrane of target bacteria and in planar bilayer membranes. Its amino acid sequence is rich in charged residues, except for a hydrophobic segment of 40 residues near the carboxyl terminus. In the crystal structure of colicin Ia and related colicins, this segment forms an alpha-helical hairpin. The hydrophobic segment is thought to be involved in the initial association of the colicin with the membrane and in the formation of the channel, but various orientations of the hairpin with respect to the membrane have been proposed. To address this issue, we attached biotin to a residue at the tip of the hydrophobic hairpin, and then probed its location with the biotin-binding protein streptavidin, added to one side or the other of a planar bilayer. Streptavidin added to the same side as the colicin prevented channel opening. Prior addition of streptavidin to the opposite side protected channels from this effect, and also increased the rate of channel opening; it produced these effects even before the first opening of the channels. These results suggest a model of membrane association in which the colicin first binds with the hydrophobic hairpin parallel to the membrane; next the hairpin inserts in a transmembrane orientation; and finally the channel opens. We also used streptavidin binding to obtain a stable population of colicin molecules in the membrane, suitable for the quantitative study of voltage-dependent gating. The effective gating charge thus determined is pH-independent and relatively small, compared with previous results for wild-type colicin Ia.

A mechanism for toxin insertion into membranes is suggested by the crystal structure of the channel-forming domain of colicin E1

BACKGROUND

Channel-forming colicins, including colicin E1, are a sub-family of bacteriocins. The toxic action of colicin E1 is derived from its ability to form a voltage-gated channel, which causes depolarization of the cytoplasmic membrane of sensitive Escherichia coli cells. In this process, the toxin-like colicin E1 molecule must undergo a substantial structural transition from a soluble state, in which it binds the target cell, to a membrane-bound state. Details of the structural changes that accompany this conversion may be directly applicable to other channel-forming toxins, as well as to the mechanism by which proteins insert into or cross membranes.

RESULTS

The structure of the 190-residue channel-forming domain of colicin E1 in its soluble form has been solved at 2.5 A resolution. This structure contains 10alpha helices arranged in three layers (A-C) with a central hydrophobic helical hairpin in layer B, which is proposed to anchor the membrane-bound form in the bilayer. The extended N-terminal helix I provides a connection to the rest of the colicin E1 molecule, and the loop I-II may act as a hinge for re-orientation of the domain for membrane binding. A set of conserved positively charged residues on layer C may provide the docking surface on the molecule for membrane attachment. A large internal cavity between layers B and C may allow these layers to disengage, suggesting a mechanism for unfolding the molecule on the membrane that involves the perturbation of the interhelical hydrophobic interactions in layer C.

CONCLUSION

On the basis of the structure of the colicin E1 channel-forming domain, its comparison with the structure of the colicin A domain and the known requirement for initial electrostatic and subsequent hydrophobic interactions, molecular details of the docking, unfolding and insertion of the channel-forming domain into the membrane are proposed. The model for docking and initial interaction with the membrane positions the hydrophobic hairpin 'anchor' approximately parallel to the membrane surface. Hydrophobic interactions in the docking layer may then be displaced by interactions with the membrane, spreading the helices on the surface and exposing the hydrophobic hairpin for insertion into the membrane.

Bcl-x(L) forms an ion channel in synthetic lipid membranes

Bcl-2-related proteins are critical regulators of cell survival that are localized to the outer mitochondrial, outer nuclear and endoplasmic reticulum membranes. Despite their physiological importance, the biochemical function of Bcl-2-related proteins has remained elusive. The three-dimensional structure of Bcl-xL, an inhibitor of apoptosis, was recently shown to be similar to the structures of the pore-forming domains of bacterial toxins. A key feature of these pore-forming domains is the ability to form ion channels in biological membranes. Here we demonstrate that Bcl-xL shares this functional feature. Like the bacterial toxins, Bcl-xL can insert into either synthetic lipid vesicles or planar lipid bilayers and form an ion-conducting channel. This channel is pH-sensitive and becomes cation-selective at physiological pH. The ion-conducting channel(s) formed by Bcl-xL display multiple conductance states that have identical ion selectivity. Together, these data suggest that Bcl-xL may maintain cell survival by regulating the permeability of the intracellular membranes to which it is distributed.