Review of binding methods and detection of Al(III) binding events in trypsin and DL-DPPC liposomes by a general thermodynamic model

Milestones and recent discoveries on cell death mediated by mitochondria and their interactions with biologically active amines

Mitochondria represent cell "powerhouses," being involved in energy transduction from the electrochemical gradient to ATP synthesis. The morphology of their cell types may change, according to various metabolic processes or osmotic pressure. A new morphology of the inner membrane and mitochondrial cristae, significantly different from the previous one, has been proposed for the inner membrane and mitochondrial cristae, based on the technique of electron tomography. Mitochondrial Ca(2+) transport (the transporter has been isolated) generates reactive oxygen species and induces the mitochondrial permeability transition of both inner and outer mitochondrial membranes, leading to induction of necrosis and apoptosis. In the mitochondria of several cell types (liver, kidney, and heart), mitochondrial oxidative stress is an essential step in the induction of cell death, although not in brain, in which the phenomenon is caused by a different mechanism. Mitochondrial permeability transition drives both apoptosis and necrosis, whereas mitochondrial outer membrane permeability is characteristic of apoptosis. Adenine nucleotide translocase remains the most important component involved in membrane permeability, with the opening of the transition pore, although other proteins, such as ATP synthase or phosphate carriers, have been proposed. Intrinsic cell death is triggered by the release from mitochondria of proteic factors, such as cytochrome c, apoptosis inducing factor, and Smac/DIABLO, with the activation of caspases upon mitochondrial permeability transition or mitochondrial outer membrane permeability induction. Mitochondrial permeability transition induces the permeability of the inner membrane in sites in contact with the outer membrane; mitochondrial outer membrane permeability forms channels on the outer membrane by means of various stimuli involving Bcl-2 family proteins. The biologically active amines, spermine, and agmatine, have specific functions on mitochondria which distinguish them from other amines. Enzymatic oxidative deamination of spermine by amine oxidases in tumor cells may produce reactive oxygen species, leading to transition pore opening and apoptosis. This process could be exploited as a new therapeutic strategy to combat cancer.

Benzothiopyranoindole-based antiproliferative agents: synthesis, cytotoxicity, nucleic acids interaction, and topoisomerases inhibition properties

Novel benzo[3',2':5,6]thiopyrano[3,2-b]indol-10(11H)-ones 1a-v were synthesized and evaluated for their antiproliferative activity in an in vitro assay of human tumor cell lines (HL-60 and HeLa). Compounds 1e-v, substituted at the 11-position with a basic side chain, showed a significant ability to inhibit cell growth with IC(50) values in the low micromolar range. Linear dichroism measurements showed that all 11-dialkylaminoalkyl substituted derivatives 1e-v behave as DNA-intercalating agents. Fluorimetric titrations demonstrated their specificity in binding to A-T rich regions, and molecular modeling studies were performed on the most active derivatives (1e, 1i, 1p) to characterize in detail the complexation mechanism of these benzothiopyranoindoles to DNA. A relaxation assay evidenced a dose-dependent inhibition of topoisomerase II activity that appeared in accordance with the antiproliferative capacity. Finally, for the most cytotoxic derivative, 1e, a topoisomerase II poisoning effect was also demonstrated, along with a weak inhibition of topoisomerase I-mediated relaxation.

Equilibrium isotherm studies for the uptake of cadmium and lead ions onto sugar beet pulp

The adsorption of Cd2+ and Pb2+ on sugar beet pulp (SBP), a low-cost material, has been studied. In the present work, the abilities of native (SBP) to remove cadmium (Cd2+) and lead (Pb2+) ions from aqueous solutions were compared. The (SBP) an industrial by product and solid waste of sugar industry were used for the removal of Cd2+ and Pb2+ ions from aqueous water. Batch adsorption studies were carried out to examine the influence of various parameters such as initial pH, adsorbent dose, initial metal ion concentration, and time on uptake. The sorption process was relatively fast and equilibrium was reached after about 70 min of contact. As much as 70-75% removal of Cd2+ and Pb2+ ions for (SBP) are possible in about 70 min, respectively, under the batch test conditions. Uptake of Cd2+ and Pb2+ ions on (SBP) showed a pH-dependent profile. The overall uptake for the (SBP) is at a maximum at pH 5.3 and gives up to 46.1 mg g(-1) for Cd2+ and at pH 5.0 and gives 43.5 mg g(-1) for Pb2+ for (SBP), which seems to be removed exclusively by ion exchange, physical sorption and chelation. A dose of 8 gL(-1) was sufficient for the optimum removal of both the metal ions. The Freundlich represented the sorption data for (SBP). In the presence of 0.1M NaNO3 the level of metal ion uptake was found to reach its maximum value very rapidly with the speed increasing both with the (SPB) concentration and with increasing initial pH of the suspension. The reversibility of the process was investigated. The desorption of Cd2+ and Pb2+ ions which were previously deposited on the (SBP) back into the deionised water was observed only in acidic pH values during one day study period and was generally rather low. The extent of adsorption for both metals increased along with an increase of the (SBP) dosage. (SBP), which is cheap and highly selective, therefore seems to be a promising substrate to entrap heavy metals in aqueous solutions.

Adsorptive removal of Methylene blue and Methyl orange from aqueous media by carboxylated diaminoethane sporopollenin: on the usability of an aminocarboxilic acid functionality-bearing solid-stationary phase in column techniques

The adsorption phenomena of Methylene blue (MB) and Methyl orange (MO) on a carboxylated diaminoethane sporopollenin (CDAE-S) solid phase were investigated in a column arrangement by using breakthrough technique. The adsorption phenomena were evaluated using some common adsorption isotherm models and Scatchard plot analysis, and obtained results were interpreted for evaluating the usability of CDAE-S for removal, recovery and preconcentration of the studied dyes both at the laboratory and industrial scales. On the basis of Scatchard plot analysis, the interaction types between the CDAE-S and the studied dyes were criticized in terms of affinity phenomena. Thus, the usability of a biomacromolecule-derived material, CDAE-S, as a cheap, environmentally-friendly and effective solid-stationary phase exhibiting both cation-exchange and anion-exchange characteristics at the same time, is discussed through the present study. Besides, from the obtained results, the protonated CDAE-S, which functionally resembles an amino acid structure, are presented as a two-in-one solid-stationary phase, and its adaptability to common processes performed under column conditions is also drawn in detail.

Adsorption of cadmium on husk of Lathyrus sativus: Physico-chemical study

Adsorption of cadmium (II) from aqueous solution by low-cost biosorbents was investigated. Husk of Lathyrus sativus (HLS) was found to be the most efficient in this respect and removed approximately 95% of the metal. The influence of pH, temperature, contact time and metal ion concentration on the adsorption process by HLS was studied. Hydrogen ion concentration of the solution greatly influenced the process with an optimum at pH 5.0-6.0, whereas temperature had no significant effect. The process was very fast and more than 90% of the total adsorption took place within the first 5 min and was found to follow pseudo-second order rate kinetics. The adsorption data can better be explained by Langmuir isotherm model and the calculated maximum adsorption capacity was 35 mg/g of HLS at pH 5.0 and 30 degrees C. Scanning electron micrographs showed that cadmium was present as micro precipitate on the surface of the adsorbent. Cadmium replaced calcium of the biomass as revealed from the EDX analysis indicating that the adsorption proceeds through ion exchange mechanism. Cadmium could be desorbed from the loaded biomass by lowering pH approximately 1.0 with mineral acid.

Removal of aniline from aqueous solution by PVC-CDAE ligand-exchanger

The adsorption of aniline from aqueous solutions onto cobalt(II)-poly(vinyl chloride)-carboxylated diaminoethane (PVC-CDAE) resin has been studied using a mini-column apparatus at 25+/-0.1 degrees C. First of all, experimental data obtained from the breakthrough curves were tested by using the Scatchard plot analysis, to have a preliminary prediction about the types of interaction of the resin with aniline. Our aim was to determine the model which best describes the experimental data. The aspect of the Scatchard plot indicated that the aniline adsorption did not follow the Langmuir model and the presence of two types of binding sites for aniline on the resin. However, the dynamics of aniline uptake were represented by the Freundlich model reasonably well. The kinetics of aniline adsorption from aqueous solution on the cobalt(II)-PVC-CDAE have also been tested using continuous column runs and rate-controlling step of the process was determined. In this study, homogeneous diffusion model was adapted to a column system to describe the change in the aniline concentration at the column exit beginning from breakthrough point as a function of time. Kinetic studies revealed that the rate-controlling step of the aniline adsorption was predominately film diffusion controlled rather particle diffusion.

Adsorption of indole and 2-methylindole on ligand-exchange matrix

The adsorption of indole and its 2-methyl derivative from aqueous solutions onto cobalt(II)-carboxylated diaminoethane sporopollenin (CDAE-sporopollenin) was studied using a fixed-bed column at 25+/-0.1 degrees C. Minicolumn adsorption studies showed that the breakthrough and the total adsorption capacities of CDAE-sporopollenin in the concentration range we have studied increased with increasing external ligand concentration. The characteristics of the adsorption process were investigated using Scatchard plot analysis, where the equilibrium binding data for indole on ligand exchanger gave rise to a linear plot. However, for 2-methylindole, divergence from the Scatchard plot was evident, consistent with the participation of secondary equilibrium effects in the adsorption process. The adsorption behaviors of ligands on CDAE-sporopollenin were expressed by both the Langmuir and Freundlich isotherms. The adsorption isotherm data for these ligands on the resin can be satisfactorily fitted to the Freundlich isotherm within the concentration range studied. However, in the case of 2-methylindole, the experimental data did not fit the Langmuir model, especially when a high ligand concentration range is used; this is probably due to the nonspecific interactions between the ligand exchange matrix and the methyl group present. Ligand adsorption constants and correlation coefficients for the ligands were calculated from the Langmuir and Freundlich isotherms.

Binding studies on aluminum(III)-albumin interaction

The present paper reports a quantitative investigation on the binding of aluminum to human serum albumin. Equilibrium dialysis and a general thermodynamic approach have been used to determine the binding parameters. Two aluminum binding sites have been identified on the albumin molecule, involving sites with single and double occupancy modes. The binding properties of these two distinct sites appear to undergo reciprocal influences, suggesting a possible interaction between the corresponding protein moieties. Both coordination modes proceed from weak interactions, as shown by the binding energies calculated.