Oxygen electroreduction on titanium-supported thin Pt films in alkaline solution

Selection of oxygen reduction catalysts for secondary tri-electrode zinc-air batteries

Oxygen reduction reaction (ORR) electrocatalysts, which are highly efficient, low-cost, yet durable, are important for secondary Zn–air cell applications. ORR activities of single and mixed metal oxide and carbon electrocatalysts were studied using rotating disc electrode (RDE) measurements, Tafel slope and Koutecky–Levich plots. It was found that MnO_x combined with XC-72R demonstrated high ORR activity and good stability—up to 100 mA cm⁻². The performance of the selected ORR electrode and a previously optimised oxygen evolution reaction (OER) electrode was thereafter tested in a custom-built secondary Zn–air cell in a tri-electrode configuration, and the effects of current density, electrolyte molarity, temperature, and oxygen purity on the performance of the ORR and OER electrode were investigated. Finally, the durability of the secondary Zn–air system was assessed, demonstrating energy efficiencies of 58–61% at 20 mA cm⁻² over 40 h in 4 M NaOH + 0.3 M ZnO at 333 K.

A simple and effective method for the accurate extraction of kinetic parameters using differential Tafel plots

The practice of estimating the transfer coefficient (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α) and the exchange current (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}$$\end{document}i0) by arbitrarily placing a straight line on Tafel plots has led to high variance in these parameters between different research groups. Generating Tafel plots by finding kinetic current, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{k}$$\end{document}ik from the conventional mass transfer correction method does not guarantee an accurate estimation of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}$$\end{document}i0. This is because a substantial difference in values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}$$\end{document}i0 can arise from only minor deviations in the calculated values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{k}$$\end{document}ik. These minor deviations are often not easy to recognise in polarisation curves and Tafel plots. Recalling the IUPAC definition of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α , the Tafel plots can be alternatively represented as differential Tafel plots (DTPs) by taking the first order differential of Tafel plots with respect to overpotential. Without further complex processing of the existing raw data, many crucial observations can be made from DTP which is otherwise very difficult to observe from Tafel plots. These for example include a) many perfectly looking experimental linear Tafel plots (R² > 0.999) can give rise to incorrect kinetic parameters b) substantial differences in values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}$$\end{document}i0 can arise when the limiting current (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{L}$$\end{document}iL) is just off by 5% while performing the mass transfer correction c) irrespective of the magnitude of the double layer charging current (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{\mathrm{c}}$$\end{document}ic), the Tafel plots can still get significantly skewed when the ratio of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}/{i}_{c}$$\end{document}i0/ic is small. Hence, in order to determine accurate values of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{0}$$\end{document}i0, we show how the DTP approach can be applied to experimental polarisation curves having well defined \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{L}$$\end{document}iL, poorly defined \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{L}$$\end{document}iL and no \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${i}_{L}$$\end{document}iL at all.

Pt nanoparticles supported on nitrogen-doped porous carbon as efficient oxygen reduction catalysts synthesized via a simple alcohol reduction method

Abstract

Pt nanoparticles supported on nitrogen-doped porous carbon (NPC) were investigated as both a highly active catalyst for the oxygen reduction reaction (ORR) and a suitable porous support structure. Pt/NPC catalysts with loadings of 8.8–35.4 wt.% were prepared via a simple alcohol reduction method and exhibited homogeneously dispersed Pt nanoparticles with a small mean size ranging from 1.90 to 2.99 nm. X-ray photoelectron spectroscopy measurement suggested the presence of strong interactions between the Pt nanoparticles and NPC support. 27.4% Pt/NPC demonstrated high catalytic activity for the ORR in a rotating disk electrode system and was also effectively applied to a gas diffusion electrode (GDE). A GDE fabricated using the Pt/NPC with a fine pore network exhibited excellent performance, especially at high current densities. Specific activity of Pt/NPC and Pt/carbon black catalysts for the ORR correlated with the peak potential of adsorbed OH reduction on Pt, which was dependent on the particle size and support.

Graphic abstract

Mechanochemically Synthetized PAN-Based Co-N-Doped Carbon Materials as Electrocatalyst for Oxygen Evolution Reaction

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co₃O₄ species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm². This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

Chemical Vapor Deposition-Grown Nickel-Encapsulated N-Doped Carbon Nanotubes as a Highly Active Oxygen Reduction Reaction Catalyst without Direct Metal-Nitrogen Coordination

Nickel-encapsulated nitrogen-doped carbon nanotubes (Ni-TiO₂-NCNTs) are synthesized via chemical vapor deposition by thermal decomposition of acetylene with acetonitrile vapor at 700 °C on the Ni-TiO₂ matrix. TiO₂ is used as a dispersant medium for Ni nanoparticles, which assists in higher CNT growth at high temperatures. A reference catalyst is made by following the similar procedure without acetonitrile vapor, which is called a Ni-TiO₂-CNT. Acid treatment of these two catalysts dissolved Ni on the surface of CNTs-NCNTs, producing catalysts with enhanced surface area and defects. The transmission electron microscopy-energy-dispersive X-ray spectra analysis of acid-treated version of the catalysts confirmed the presence of encapsulated Ni. Oxygen reduction reaction (ORR) activity of these catalysts was analyzed in 0.1 N KOH solution. Among these, the acid-treated Ni-TiO₂-NCNT exhibited highest ORR onset potential of 0.88 V versus reversible hydrogen electrode and a current density of 3.7 mA cm^-2 at 170 μg cm^-2 of catalyst loading. The stability of the acid-treated Ni-TiO₂-NCNT is proved by cyclic voltammetry and chronoamperometry measurements which are done for 800 cycles and 100 h, respectively. Primarily N doping of CNTs is the reason behind the improved ORR activity.

Accurate Assessment of the Oxygen Reduction Electrocatalytic Activity of Mn/Polypyrrole Nanocomposites Based on Rotating Disk Electrode Measurements, Complemented with Multitechnique Structural Characterizations

This paper reports on the quantitative assessment of the oxygen reduction reaction (ORR) electrocatalytic activity of electrodeposited Mn/polypyrrole (PPy) nanocomposites for alkaline aqueous solutions, based on the Rotating Disk Electrode (RDE) method and accompanied by structural characterizations relevant to the establishment of structure-function relationships. The characterization of Mn/PPy films is addressed to the following: (i) morphology, as assessed by Field-Emission Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscope (AFM); (ii) local electrical conductivity, as measured by Scanning Probe Microscopy (SPM); and (iii) molecular structure, accessed by Raman Spectroscopy; these data provide the background against which the electrocatalytic activity can be rationalised. For comparison, the properties of Mn/PPy are gauged against those of graphite, PPy, and polycrystalline-Pt (poly-Pt). Due to the literature lack of accepted protocols for precise catalytic activity measurement at poly-Pt electrode in alkaline solution using the RDE methodology, we have also worked on the obtainment of an intralaboratory benchmark by evidencing some of the time-consuming parameters which drastically affect the reliability and repeatability of the measurement.

Superoxide Ion: Generation and Chemical Implications

Superoxide ion (O2(•-)) is of great significance as a radical species implicated in diverse chemical and biological systems. However, the chemistry knowledge of O2(•-) is rather scarce. In addition, numerous studies on O2(•-) were conducted within the latter half of the 20th century. Therefore, the current advancement in technology and instrumentation will certainly provide better insights into mechanisms and products of O2(•-) reactions and thus will result in new findings. This review emphasizes the state-of-the-art research on O2(•-) so as to enable researchers to venture into future research. It comprises the main characteristics of O2(•-) followed by generation methods. The reaction types of O2(•-) are reviewed, and its potential applications including the destruction of hazardous chemicals, synthesis of organic compounds, and many other applications are highlighted. The O2(•-) environmental chemistry is also discussed. The detection methods of O2(•-) are categorized and elaborated. Special attention is given to the feasibility of using ionic liquids as media for O2(•-), addressing the latest progress of generation and applications. The effect of electrodes on the O2(•-) electrochemical generation is reviewed. Finally, some remarks and future perspectives are concluded.

Insight on Tafel slopes from a microkinetic analysis of aqueous electrocatalysis for energy conversion

Microkinetic analyses of aqueous electrochemistry involving gaseous H2 or O2, i.e., hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), are revisited. The Tafel slopes used to evaluate the rate determining steps generally assume extreme coverage of the adsorbed species (θ≈0 or ≈1), although, in practice, the slopes are coverage-dependent. We conducted detailed kinetic analyses describing the coverage-dependent Tafel slopes for the aforementioned reactions. Our careful analyses provide a general benchmark for experimentally observed Tafel slopes that can be assigned to specific rate determining steps. The Tafel analysis is a powerful tool for discussing the rate determining steps involved in electrocatalysis, but our study also demonstrated that overly simplified assumptions led to an inaccurate description of the surface electrocatalysis. Additionally, in many studies, Tafel analyses have been performed in conjunction with the Butler-Volmer equation, where its applicability regarding only electron transfer kinetics is often overlooked. Based on the derived kinetic description of the HER/HOR as an example, the limitation of Butler-Volmer expression in electrocatalysis is also discussed in this report.

Electrocatalysis of oxygen reduction and small alcohol oxidation in alkaline media

We present here a critical review of several technologically important electrocatalytic systems operating in alkaline electrolytes. These include the oxygen reduction reaction (ORR) occurring on catalysts containing Pt, Pd, Ir, Ru, or Ag, the methanol oxidation reaction (MOR) occurring on Pt-containing catalysts, and the ethanol oxidation reaction (EOR) occurring on Ni-Co-Fe alloy catalysts. Each of these catalytic systems is relevant to alkaline fuel cell (AFC) technology, while the ORR systems are also relevant to chlor-alkali electrolysis and metal-air batteries. The use of alkaline media presents advantages both in electrocatalytic activity and in materials stability and corrosion. Therefore, prospects for the continued development of alkaline electrocatalytic systems, including alkaline fuel cells, seem very promising.

Oxygen reduction at platinum nanoparticles supported on carbon cryogel in alkaline solution

The oxygen reduction reaction was investigated in 0.1 M NaOH solution, on a porous coated electrode formed of Pt particles supported on carbon cryogel. The Pt/C catalyst was characterized by the X-ray diffraction (XRD), transmission electron microscopy (TEM) and cyclic voltammetry techniques. The results demonstrated a successful reduction of Pt to metallic form and homogenous Pt particle size distribution with a mean particle size of about 2.7 nm. The ORR kinetics was investigated by linear sweep polarization at a rotating disc electrode. The results showed the existence of two E - log j regions, usually referred to polycrystalline Pt in acid and alkaline solution. At low current densities (lcd), the Tafel slope was found to be close to -2.3RT/F, while at high current densities (hcd) it was found to be close to -2?2.3RT/F. It is proposed that the main path in the ORR mechanism on Pt particles was the direct four-electron process, with the transfer of the first electron as the rate determining step. If the activities are expressed through the specific current densities, a small enhancement of the catalytic activity for Pt/C was observed compared to that of polycrystalline Pt. The effect of the Pt particle size on the electrocatalysis of oxygen reduction was ascribed to the predominant (111) facets of the platinum crystallites. .

Oxygen Reduction at Platinum Monolayer Islands Deposited on Au(111)

Atomic monolayer islands of Pt, namely, two-dimensional Pt nanoparticles, on a Au(111) electrode have been studied for the first time, focusing on their electrocatalytic activities for oxygen reduction in acid solutions. The Pt islands' electrodes were prepared using the self-assembled technique of thiols together with the replacement of Pt with a Cu monolayer. The states of adsorbed OH and the catalytic activities of oxygen reduction were sensitive to the Pt island size. As island size decreased, a delay in the reduction of surface oxide was observed. However, negligible influence of adsorbed OH on activity for oxygen reduction was observed. Pt islands of sizes ranging from 5 to 10 nm showed higher specific catalytic activities for oxygen reduction. Specific catalytic activities decreased by a factor of 10 with a decrease in island sizes from 5.5 to 3.1 nm. Size effects observed in Pt monolayer islands were discussed in comparison with three-dimensional nanoparticles, to obtain information concerning the size effects of metal nanoparticles.

Tungsten Carbide Nanocrystal Promoted Pt/C Electrocatalysts for Oxygen Reduction

Tungsten carbide nanocrystals on carbon (W2C/C) and tungsten carbide nanocrystals and Pt on carbon (Pt-W2C/C) composite electrocatalysts were prepared by the intermittent microwave heating (IMH) method and tested for the electroreduction of oxygen in the acidic media for the first time. The results revealed that the tungsten carbide nanocrystal promoted Pt/C electrocatalyst was very active for ORR with the onset potential of 1.0 V vs SHE at ambient temperature that is over 100 mV more positive compared with that of traditional Pt/C electrocatalyst. The kinetic parameters were determined. The exchange current densities at both high and low overpotential regions are two orders higher for ORR on Pt-W2C/C than that on Pt/C, showing a synergetic effect to improve the activity for ORR. The novel electrocatalysts show a poisoning resistant property toward methanol.