Importance of donor number in determining solvating ability of polymers and transport properties in gel-type polymer electrolytes

Low Solvating Power of Acetonitrile Facilitates Ion Conduction: A Solvation-Conductivity Riddle

Acetonitrile (AN) electrolyte solutions display uniquely high ionic conductivities, of which the rationale remains a long-standing puzzle. This research delves into the solution species and ion conduction behavior of 0.1 and 3.0 M LiTFSI AN and propylene carbonate (PC) solutions via Raman and dielectric relaxation spectroscopies. Notably, LiTFSI-AN contains a higher fraction of free solvent uncoordinated to Li ions than LiTFSI-PC, resulting in a lower viscosity of LiTFSI-AN and facilitating a higher level of ion conduction. The abundant free solvent in LiTFSI-AN is attributed to the lower Li-solvation power of AN, but despite this lower Li-solvation power, LiTFSI-AN exhibits a level of salt dissociation comparable to that of LiTFSI-PC, which is found to be enabled by TFSI anions loosely bound to Li ions. This work challenges the conventional notion that high solvating power is a prerequisite for high-conductivity solvents, suggesting an avenue to explore optimal solvents for high-power energy storage devices.

Do non-coordinating polymers function as host materials for solid polymer electrolytes? The case of PVdF-HFP

In the search for novel solid polymer electrolytes (SPEs), primarily targeting battery applications, a range of different polymers is currently being explored. In this context, the non-coordinating poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) polymer is a frequently utilized system. Considering that PVdF-HFP should be a poor solvent for cation salts, it is counterintuitive that this is a functional host material for SPEs. Here, we do an in-depth study of the salt dissolution properties and ionic conductivity of PVdF-HFP-based electrolytes, using two different fabrication methods and also employing a low-molecular-weight solvent analogue. It is seen that PVdF-HFP is remarkably poor as an SPE host, despite its comparatively high dielectric constant, and that the salt dissolution properties instead are controlled by fluorophilic interactions of the anion with the polymer.

Giant Negative Thermopower Enabled by Bidirectionally Anchored Cations in Multifunctional Polymers

The lack of high-quality ionic thermoelectric materials with negative thermopowers has stimulated scientists' broad research interest. The effective adjustment of the interaction between ions and a polymer network is an important way to achieve high-quality ion thermoelectric properties. Integrating different types of ion-polymer interactions into the same thermoelectric device seems to lead to unexpected gains. In this work, we propose a strategy for bidirectionally anchoring cations to synergistically generate a giant negative thermopower and high ionic conductivity. This is mainly achieved through synergistic ion-polymer coordination and Coulomb interactions. An ionic thermoelectric material was prepared by infiltrating a polycation electrolyte [poly(diallyldimethylammonium chloride)] with CuCl₂ into the poly(vinyl alcohol)-chitosan aerogel. The confinement effect of copper-coordinated chitosan on cations, the repulsive property of the polycationic electrolyte on cations, and the unique chemical configuration of a transition metal chloride anion ([CuCl₄]^2-) are the fundamental guarantees for achieving a thermopower of -28.4 mV·K^-1. Moreover, benefiting from the high charge density of the polycationic electrolyte, we obtain an ionic conductivity of 40.5 mS·cm^-1. These findings show the application prospect of synergistic different types of ion-polymer interactions in designing multifunctional ionic thermoelectric materials.

Solution NMR of Battery Electrolytes: Assessing and Mitigating Spectral Broadening Caused by Transition Metal Dissolution

NMR spectroscopy is a powerful tool that is commonly used to assess the degradation of lithium-ion battery electrolyte solutions. However, dissolution of paramagnetic Ni²⁺ and Mn²⁺ ions from cathode materials may affect the NMR spectra of the electrolyte solution, with the unpaired electron spins in these paramagnetic solutes inducing rapid nuclear relaxation and spectral broadening (and often peak shifts). This work establishes how dissolved Ni²⁺ and Mn²⁺ in LiPF₆ electrolyte solutions affect ¹H, ¹⁹F, and ³¹P NMR spectra of pristine and degraded electrolyte solutions, including whether the peaks from degradation species are at risk of being lost and whether the spectral broadening can be mitigated. Mn²⁺ is shown to cause far greater peak broadening than Ni²⁺, with the effect of Mn²⁺ observable at just 10 μM. Generally, ¹⁹F peaks from PF₆ ^- degradation species are most affected by the presence of the paramagnetic metals, followed by ³¹P and ¹H peaks. Surprisingly, when NMR solvents are added to acquire the spectra, the degree of broadening is heavily solvent-dependent, following the trend of solvent donor number (increased broadening with lower solvent donicity). Severe spectral broadening is shown to occur whether Mn is introduced via the salt Mn(TFSI)₂ or is dissolved from LiMn₂O₄. We show that the weak ¹⁹F and ³¹P peaks in spectra of electrolyte samples containing micromolar levels of dissolved Mn²⁺ are broadened to an extent that they are no longer visible, but this broadening can be minimized by diluting electrolyte samples with a suitably coordinating NMR solvent. Li₃PO₄ addition to the sample is also shown to return ¹⁹F and ³¹P spectral resolution by precipitating Mn²⁺ out of electrolyte samples, although this method consumes any HF in the electrolyte solution.

Insight into the Key Factors in High Li+ Transference Number Composite Electrolytes for Solid Lithium Batteries

Solid lithium batteries (SLBs) have received much attention due to their potential to achieve secondary batteries with high energy density and high safety. The solid electrolyte (SE) is believed to be the essential material for SLBs. Among the recent SEs, composite electrolytes have good interfacial compatibility and customizability, which have been broadly investigated as promising contenders for commercial SLBs. The high Li⁺ transference number (t Li + ${{_{{\rm Li}{^{+}}}}}$ ) of composite electrolytes is critically important concerning the power/energy density and cycling life of SLBs, however, which is often overlooked. This Review presents a current opinion on the key factors in high t Li + ${{_{{\rm Li}{^{+}}}}}$ composite electrolytes, including polymers, Li-salts, inorganic fillers, and additives. Various strategies concerning providing a continuous pathway for Li-ions and immobilizing anions via component interaction are discussed. This Review highlights the major obstacles hindering the development of high t Li + ${{_{{\rm Li}{^{+}}}}}$ composite electrolytes and proposes future research directions for developing composite electrolytes with high t Li + ${{_{{\rm Li}{^{+}}}}}$ .

Regulating Na Electrodeposition by Sodiophilic Grafting onto Porosity-Gradient Gel Polymer Electrolytes for Dendrite-Free Sodium Metal Batteries

Sodium metal batteries have been emerging as promising candidates for post-Li battery systems owing to the natural abundance, low costs, and high energy density of Na metal. However, exploiting an Na metal anode is accompanied by uncontrolled Na electrodeposition, particularly concerning dendrite growth, hampering practical Na metal battery applications. Herein, we propose sodiophilic gel polymer electrolytes with a porosity-gradient Janus structure to alleviate Na dendrite growth. Tethering only 1.1 mol % sodiophilic poly(ethylene glycol) to poly(vinylidene fluoride-co-hexafluoropropylene) suppresses Na dendrites by regulating homogeneous Na⁺ distribution, which relies on molecular-level coordination between Na⁺ and the sodiophilic functional groups. By exploiting the porosity-gradient Janus structure, we have demonstrated that regular porosity and well-defined morphology of polymer electrolytes, particularly at the Na/electrolyte interface, significantly impact dendrite growth. This study provides new insights into the rational design of Na dendrite-suppressing polymer electrolytes, primarily focusing on the ion-regulating ability achieved by surface engineering.

Effects of Solvent Polarity on Li-ion Diffusion in Polymer Electrolytes: An All-Atom Molecular Dynamics Study with Charge Scaling

We herein report an all-atom molecular dynamics study on the role of solvent polarity for Li+ diffusion in polymer electrolytes using PEO-LiTFSI (poly(ethylene oxide)-lithium bis(trifluoromethane)sulfonimide) as a model system. By separating the effect of Tg and the effect of solvent polarity in our simulations, we show that the maximum in the diffusion coefficient of Li+ with respect to the dielectric constant of polymer solvent εp is due to transitions in the transport mechanism. In particular, it is found that the frequent interchain hopping involves the coordination of both PEO and TFSI. This optimal solvating ability of PEO at an intermediate value of εp leads to the fast ion conduction. These findings highlight the synergetic effect of solvent polarity and bond polarity on Li-ion diffusion in solid polymer electrolytes.

Thermoplastic Polyurethane Elastomer-Based Gel Polymer Electrolytes for Sodium-Metal Cells with Enhanced Cycling Performance

Sodium batteries have been recognized as a promising alternative to lithium-ion batteries. However, the liquid electrolyte used in these batteries has inherent safety problems. Polymer electrolytes have been considered as safer and more reliable electrolyte systems for rechargeable batteries. Herein, a thermoplastic polyurethane elastomer-based gel polymer electrolyte with high ionic conductivity and high elasticity was reported. It had an ambient-temperature ionic conductivity of 1.5 mS cm^-1 and high stretchability, capable of withstanding 610 % strain. Coordination between Na⁺ ions and polymer chains increased the degree of salt dissociation in the gel polymer electrolyte compared with the liquid electrolyte. An Na/Na₃ V₂ (PO₄ )₃ cell assembled with gel polymer electrolyte exhibited good cycling performance in terms of discharge capacity, cycling stability, and rate capability, which was owing to the effective trapping ability of organic solvents in the polymer matrix and uniform flux of sodium ions through the gel polymer electrolyte.

Improved lithium ion dynamics in crosslinked PMMA gel polymer electrolyte

Ionic transport was investigated in a PMMA gel electrolyte by electrochemical, Raman, PFG-NMR, e-NMR spectroscopies and ab initio calculations. The presence of the PMMA matrix reduces anionic mobility and decorrelates cationic and anionic transport.

Hybrid Solid Polymer Electrolytes with Two-Dimensional Inorganic Nanofillers

Solid polymer electrolytes are of rapidly increasing importance for the research and development of future safe batteries with high energy density. The diversified chemistry and structures of polymers allow the utilization of a wide range of soft structures for all-polymer solid-state electrolytes. With equal importance is the hybrid solid-state electrolytes consisting of both "soft" polymeric structure and "hard" inorganic nanofillers. The recent emergence of the re-discovery of many two-dimensional layered materials has stimulated the booming of advanced research in energy storage fields, such as batteries, supercapacitors, and fuel cells. Of special interest is the mass transport properties of these 2D nanostructures for water, gas, or ions. This review aims at the current progress and prospective development of hybrid polymer-inorganic solid electrolytes based on important 2D materials, including natural clay and synthetic lamellar structures. The ion conduction mechanism and the fabrication, property and device performance of these hybrid solid electrolytes will be discussed.

Improved ionic conductivity in guar gum succinate–based polymer electrolyte membrane

Guar gum succinate (GGS) was chemically modified by reacting guar gum with succinic anhydride in the presence of 4-dimethylaminopyridine. Succination was confirmed by Fourier transform infrared (FTIR) spectroscopy with carbonyl bands at 1724 cm−1 and ester linkage at 1567 cm−1 of the succinate group. The resulting amorphous, GGS was used as a polymer host to prepare cost-effective solid polymer electrolyte (SPE) films via incorporating a blend of ethylene carbonate (EC), carboxymethyl cellulose (CMC), lithium triflate (LiTf) and lithium iodide (LiI). SPE system for GGS:EC (1.0:0.6) with 30 wt% LiTf showed highest conductivity of 6.29 × 10−5 S cm−1 and GGS:CMC:EC (0.5:0.5:0.6) with 25 wt% LiI showed highest conductivity of 2.10 × 10−4 S cm−1. FTIR revealed multiple complexation sites for ion mobility indicating that GGS possesses high prospects as a conductive SPE.

Gel Polymer Electrolytes Containing Anion-Trapping Boron Moieties for Lithium-Ion Battery Applications

Gel polymer electrolytes (GPEs) based on semi-interpenetrating polymer network (IPN) structure for lithium-ion batteries were prepared by mixing boron-containing cross-linker (BC) composed of ethylene oxide (EO) chains, cross-linkable methacrylate group, and anion-trapping boron moiety with poly(vinylidene fluoride) (PVDF) followed by ultraviolet light-induced curing process. Various physical and electrochemical properties of the GPEs were systematically investigated by varying the EO chain length and boron content. Dimensional stability at high temperature without thermal shrinkage, if any, was observed due to the presence of thermally stable PVDF in the GPEs. GPE having 80 wt % of BC and 20 wt % of PVDF exhibited an ionic conductivity of 4.2 mS cm^-1 at 30 °C which is 1 order of magnitude larger than that of the liquid electrolyte system containing the commercial Celgard separator (0.4 mS cm^-1) owing to the facile electrolyte uptake ability of EO chain and anion-trapping ability of the boron moiety. As a result, the lithium-ion battery cell prepared using the GPE with BC showed an excellent cycle performance at 1.0 C maintaining 87% of capacity during 100 cycles.

Morozov E, Costa LT, Bergman M, Johansson P, Fang Y, Furó I, Brandell D. Ion transport in polycarbonate based solid polymer electrolytes: experimental and computational investigations

Among the alternative host materials for solid polymer electrolytes (SPEs), polycarbonates have recently shown promising functionality in all-solid-state lithium batteries from ambient to elevated temperatures.

Influence of the Ionic Liquid Type on the Gel Polymer Electrolytes Properties

Gel Polymer Electrolytes (GPEs) composed by ZnTf₂ salt, poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP), and different ionic liquids are synthesized using n-methyl-2-pyrrolidone (NMP) as solvent. Three different imidazolium-based ionic liquids containing diverse cations and anions have been explored. Structural and electrical properties of the GPEs varying the ZnTf₂ concentration are analyzed by ATR-FTIR, DSC, TG, and cyclic voltammetry. Free salt IL-GPEs present distinct behavior because they are influenced by the different IL cations and anions composition. However, inclusion of ZnTf₂ salt inside the polymers provide GPEs with very similar characteristics, pointing out that ionic transport properties are principally caused by Zn(2+) and triflate movement. Whatever the IL used, the presence of NMP solvent inside the polymer's matrix turns out to be a key factor for improving the Zn(2+) transport inside the GPE due to the interaction between Zn(2+) cations and carbonyl groups of the NMP. High values of ionic conductivity, low activation energy values, and good voltammetric reversibility obtained regardless of the ionic liquid used enable these GPEs to be applied in Zn batteries. Capacities of 110-120 mAh·g(-1) have been obtained for Zn/IL-GPE/MnO₂ batteries discharged at -1 mA·cm(-2).

A Polymer Lithium-Oxygen Battery

Herein we report the characteristics of a lithium-oxygen battery using a solid polymer membrane as the electrolyte separator. The polymer electrolyte, fully characterized in terms of electrochemical properties, shows suitable conductivity at room temperature allowing the reversible cycling of the Li-O2 battery with a specific capacity as high as 25,000 mAh gC(-1) reflected in a surface capacity of 12.5 mAh cm(-2). The electrochemical formation and dissolution of the lithium peroxide during Li-O2 polymer cell operation is investigated by electrochemical techniques combined with X-ray diffraction study, demonstrating the process reversibility. The excellent cell performances in terms of delivered capacity, in addition to its solid configuration allowing the safe use of lithium metal as high capacity anode, demonstrate the suitability of the polymer lithium-oxygen as high-energy storage system.

High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes

Highly ordered and vertically oriented TiO2 nanotube (NT) arrays were synthesized with potentiostatic anodization of Ti foil and applied to fabricate gel-state dye-sensitized solar cells (DSSCs). The open structure of the TiO2 NT facilitates the infiltration of the gel-state electrolyte; their one-dimensional structural feature provides effective charge transport. TiO2 NTs of length L=15-35 μm were produced on anodization for periods of t=5-15 h at a constant voltage of 60 V, and sensitized with N719 for photovoltaic characterization. A commercially available copolymer, poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA), served as a gelling agent to prepare a polymer-gel electrolyte (PGE) for DSSC applications. The PGE as prepared exhibited a maximum conductivity of 4.58 mS cm(-1) with PMMA-EA (7 wt %). The phase transition temperature (Tp) of the PGE containing PMMA-EA at varied concentrations was determined on the basis of the viscosities measured at varied temperatures. Tp increased with increasing concentration of PMMA-EA. An NT-DSSC with L=30 μm assembled using a PGE containing PMMA-EA (7 wt %) exhibited an overall power conversion efficiency (PCE) of 6.9%, which is comparable with that of a corresponding liquid-type device, PCE=7.1%. Moreover, the gel-state NT-DSSC exhibited excellent thermal and light-soaking enduring stability: the best device retained ∼90% of its initial efficiency after 1000 h under 1 sun of illumination at 50 °C, whereas its liquid-state counterpart decayed appreciably after light soaking for 500 h.

Synthesis of an original fluorinated triethylene glycol methacrylate monomer and its radical copolymerisation with vinylidene fluoride. Its application as a gel polymer electrolyte for Li-ion batteries

The synthesis and characterisation of novel poly[VDF-g-oligo(EO)] graft copolymers are presented.

Solid lithium electrolytes based on an organic molecular porous solid

A new type of thermally stable solid Li electrolytes prepared via incorporation of Li⁺ ions into porous cucurbit[6]uril (PCB[6]) exhibits high Li⁺ ion conductivity and mobility.

A physical organogel electrolyte: characterized by in situ thermo-irreversible gelation and single-ion-predominent conduction

Electrolytes are characterized by their ionic conductivity (σ_i). It is desirable that overall σ_i results from the dominant contribution of the ions of interest (e.g. Li⁺ in lithium ion batteries or LIB). However, high values of cationic transference number (t₊) achieved by solid or gel electrolytes have resulted in low σ_i leading to inferior cell performances. Here we present an organogel polymer electrolyte characterized by a high liquid-electrolyte-level σ_i (~10¹ mS cm⁻¹) with high t₊ of Li⁺ (>0.8) for LIB. A conventional liquid electrolyte in presence of a cyano resin was physically and irreversibly gelated at 60°C without any initiators and crosslinkers, showing the behavior of lower critical solution temperature. During gelation, σ_i of the electrolyte followed a typical Arrhenius-type temperature dependency, even if its viscosity increased dramatically with temperature. Based on the Li⁺-driven ion conduction, LIB using the organogel electrolyte delivered significantly enhanced cyclability and thermal stability.

FTIR spectra of plasticized grafted natural rubber-LiCF3SO3 electrolytes

Chemical modification of natural rubber (NR) has frequently been attempted to improve the performance in specific application. 30% poly(methyl metacrylate) (PMMA) grafted into NR (MG30) has been explored as a potential candidate for polymer electrolytes. The complexation effect of salt and plasticizer in polymer host electrolytes had been investigated using FTIR. The carbonyl stretch of MG30 locates at 1729 cm-1, with the addition of lithium trimethanesulfonate (LiCF3SO3) salt, new band evolves at lower frequency region at 1643-1645 cm-1. The nondegenerate vibrational mode of nus(SO3) of salted electrolytes appearing at 1031-1034 cm-1 comes from 'free' trimethanesulfonate anions and the 1040-1046 cm-1 absorption from the monodentate ion paired with triflates. These indicate MG30-salt interaction. When MG30 and ethylene carbonate (EC) formed film, the CH3 asymmetric bend of MG30 appearing at 1447cm-1 is shifted to 1449 cm-1 in the EC-polymer complex. The CO stretching at 1729 cm-1 also shifted to 1728 cm-1. Hence, the EC-MG30 system is complexed to each other. EC-LiCF3SO3 interactions are indicated by the shifting of CO bending band of EC from 718 cm-1 being shifted to 720 cm-1 in the complex. In Li+-EC interaction where the ring breathing region at 897 cm-1 in EC has shifted to 899 cm-1 in EC-salt spectrum. The band appearing at 1643-1645 cm-1 due to the coordination of Li+<--O-C is still under observation and new peaks at 1779 and 1809 cm-1 are responsible to the carbonyl stretches of EC in plasticized salt-polymer electrolytes.