A novel Bacillus natto plasmid pLS32 capable of replication in Bacillus subtilis

Characterization and sequencing analysis of pLP2.5-11 and pLP3.0-4 novel cryptic plasmids from Lactiplantibacillus plantarum WP72/27

We sequenced and described two cryptic plasmids from Lactiplantibacillus plantarum strain WP72/27, termed pLP2.5-11 (OP831909) and pLP3.0-4 (OP831910). Nucleotide sequencing gave the sizes of pLP2.5-11 and pLP3.0-4 as 2754 and 3197 base pairs, with G + C contents 38.89% and 40.88% and predicted two and eight putative open reading frames, respectively. The RepA protein of pLP2.5-11 shared a 99% identity with pC30il, pLP1 and pC30il, whereas the RepB protein of pLP3.0-4 shared a 98% identity with pXY3, a member of the rolling-circle replication (RCR) pC194 family. The origin of plasmid replication was predicted to consist of inverted and directed repeat sequences upstream of the Rep genes. Sequence analysis predicted that both pLP2.5-11 and pLP3.0-4 plasmids replicate via a rolling-circle process.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03684-y.

HU Knew? Bacillus subtilis HBsu Is Required for DNA Replication Initiation

The prokaryotic nucleoid-associated protein (NAP) HU is both highly conserved and ubiquitous. Deletion of HU causes pleiotropic phenotypes, making it difficult to uncover the critical functions of HU within a bacterial cell. In their recent work, Karaboja and Wang (J Bacteriol 204:e00119-22, 2022, https://doi.org/10.1128/JB.00119-22) show that one essential function of Bacillus subtilis HU (HBsu) is to drive the DnaA-dependent initiation of DNA replication at the chromosome origin. We discuss the possible roles of HBsu in replication initiation and other essential cellular functions.

The Large pBS32/pLS32 Plasmid of Ancestral Bacillus subtilis

The ancestral strain of Bacillus subtilis NCIB3610 (3610) bears a large, low-copy-number plasmid, called pBS32, that was lost during the domestication of laboratory strain derivatives. Selection against pBS32 may have been because it encodes a potent inhibitor of natural genetic competence (ComI), as laboratory strains were selected for high-frequency transformation. Previous studies have shown that pBS32 and its sibling, pLS32 in Bacillus subtilis subsp. natto, encode a replication initiation protein (RepN), a plasmid partitioning system (AlfAB), a biofilm inhibitor (RapP), and an alternative sigma factor (SigN) that can induce plasmid-mediated cell death in response to DNA damage. Here, we review the literature on pBS32/pLS32, the genes found on it, and their associated phenotypes.

A regulated synthetic operon facilitates stable overexpression of multigene terpenoid pathway in Bacillus subtilis

The creation of microbial cell factories for sustainable production of natural products is important for medical and industrial applications. This requires stable expression of biosynthetic pathways in a host organism with favorable fermentation properties such as Bacillus subtilis. The aim of this study is to construct B. subtilis strains that produce valuable terpenoid compounds by overexpressing the innate methylerythritol phosphate (MEP) pathway. A synthetic operon allowing the concerted and regulated expression of multiple genes was developed. Up to 8 genes have been combined in this operon and a stably inherited plasmid-based vector was constructed resulting in a high production of C30 carotenoids. For this, two vectors were examined, one with rolling circle replication and another with theta replication. Theta-replication constructs were clearly superior in structural and segregational stability compared to rolling circle constructs. A strain overexpressing all eight genes of the MEP pathway on a theta-replicating plasmid clearly produced the highest level of carotenoids. The level of transcription for each gene in the operon was similar as RT-qPCR analysis indicated. Hence, that corresponding strain can be used as a stable cell factory for production of terpenoids. This is the first report of merging and stably expressing this large-size operon (eight genes) from a plasmid-based system in B. subtilis enabling high C30 carotenoid production.

Transcriptional Regulation and Mechanism of SigN (ZpdN), a pBS32-Encoded Sigma Factor in Bacillus subtilis

Laboratory strains of Bacillus subtilis encode many alternative sigma factors, each dedicated to expressing a unique regulon such as those involved in stress resistance, sporulation, and motility. The ancestral strain of B. subtilis also encodes an additional sigma factor homolog, ZpdN, not found in lab strains due to being encoded on the large, low-copy-number plasmid pBS32, which was lost during domestication. DNA damage triggers pBS32 hyperreplication and cell death in a manner that depends on ZpdN, but how ZpdN mediates these effects is unknown. Here, we show that ZpdN is a bona fide sigma factor that can direct RNA polymerase to transcribe ZpdN-dependent genes, and we rename ZpdN SigN accordingly. Rend-seq (end-enriched transcriptome sequencing) analysis was used to determine the SigN regulon on pBS32, and the 5' ends of transcripts were used to predict the SigN consensus sequence. Finally, we characterize the regulation of SigN itself and show that it is transcribed by at least three promoters: P_sigN1 , a strong SigA-dependent LexA-repressed promoter; P_sigN2 , a weak SigA-dependent constitutive promoter; and P_sigN3 , a SigN-dependent promoter. Thus, in response to DNA damage SigN is derepressed and then experiences positive feedback. How cells die in a pBS32-dependent manner remains unknown, but we predict that death is the product of expressing one or more genes in the SigN regulon.IMPORTANCE Sigma factors are utilized by bacteria to control and regulate gene expression. Some sigma factors are activated during times of stress to ensure the survival of the bacterium. Here, we report the presence of a sigma factor that is encoded on a plasmid that leads to cellular death after DNA damage.

Comparative genomics and functional analysis of a highly adhesive dairy Lactobacillus paracasei subsp. paracasei IBB3423 strain

Various Lactobacillus paracasei strains are found in diverse environments, including dairy and plant materials and the intestinal tract of humans and animals, and are also used in the food industry or as probiotics. In this study, we have isolated a new strain L. paracasei subsp. paracasei IBB3423 from samples of raw cow milk collected in a citizen science project. IBB3423 showed some desired probiotic features such as high adhesion capacity and ability to metabolize inulin. Its complete genome sequence comprising the chromosome of 3,183,386 bp and two plasmids of 5986 bp and 51,211 bp was determined. In silico analysis revealed numerous genes encoding proteins involved in carbohydrate metabolism and of extracellular localization likely supporting interaction with host tissues. In vitro tests confirmed the high adhesion capacity of IBB3423 and showed that it even exceeds that of the highly adhesive L. rhamnosus GG. Curing of the larger plasmid indicated that the adhesive properties depend on the plasmid and thus could be determined by its pilus-encoding spaCBA genes.

Liposome fragment-mediated introduction of multiple plasmids into Bacillus subtilis

Transformation of microorganisms by plasmid introduction is one of the central techniques in modern biotechnology. However, applicable transformation methods for simultaneous introduction of multiple plasmids are still limiting. Here, we reported a liposome-mediated method that efficiently introduces multiple plasmids into B. subtilis. In this method, liposomes containing three kinds of plasmids were mixed with B. subtilis protoplasts in the presence of 36% polyethylene glycol (PEG), and the resultant protoplasts were grown in cell wall-regeneration media. We found that the rates of introduction of multiple plasmids were significantly increased in the presence of liposomes. We also found that an intact liposome structure was not required for introduction, and the presence of phosphatidylglycerol (PG) was important for efficient introduction of multiple plasmids. Therefore, the liposome- or liposome fragment-mediated transformation method reported here can advance studies utilizing multiple plasmids.

Multiple links connect central carbon metabolism to DNA replication initiation and elongation in Bacillus subtilis

DNA replication is coupled to growth by an unknown mechanism. Here, we investigated this coupling by analyzing growth and replication in 15 mutants of central carbon metabolism (CCM) cultivated in three rich media. In about one-fourth of the condition tested, defects in replication resulting from changes in initiation or elongation were detected. This uncovered 11 CCM genes important for replication and showed that some of these genes have an effect in one, two or three media. Additional results presented here and elsewhere (Jannière, L., Canceill, D., Suski, C., et al. (2007), PLoS One, 2, e447.) showed that, in the LB medium, the CCM genes important for DNA elongation (gapA and ackA) are genetically linked to the lagging strand polymerase DnaE while those important for initiation (pgk and pykA) are genetically linked to the replication enzymes DnaC (helicase), DnaG (primase) and DnaE. Our work thus shows that the coupling between growth and replication involves multiple, medium-dependent links between CCM and replication. They also suggest that changes in CCM may affect initiation by altering the functional recruitment of DnaC, DnaG and DnaE at the chromosomal origin, and may affect elongation by altering the activity of DnaE at the replication fork. The underlying mechanism is discussed.

Enterococcal Genetics

The study of the genetics of enterococci has focused heavily on mobile genetic elements present in these organisms, the complex regulatory circuits used to control their mobility, and the antibiotic resistance genes they frequently carry. Recently, more focus has been placed on the regulation of genes involved in the virulence of the opportunistic pathogenic species Enterococcus faecalis and Enterococcus faecium. Little information is available concerning fundamental aspects of DNA replication, partition, and division; this article begins with a brief overview of what little is known about these issues, primarily by comparison with better-studied model organisms. A variety of transcriptional and posttranscriptional mechanisms of regulation of gene expression are then discussed, including a section on the genetics and regulation of vancomycin resistance in enterococci. The article then provides extensive coverage of the pheromone-responsive conjugation plasmids, including sections on regulation of the pheromone response, the conjugative apparatus, and replication and stable inheritance. The article then focuses on conjugative transposons, now referred to as integrated, conjugative elements, or ICEs, and concludes with several smaller sections covering emerging areas of interest concerning the enterococcal mobilome, including nonpheromone plasmids of particular interest, toxin-antitoxin systems, pathogenicity islands, bacteriophages, and genome defense.

Cryo-EM reconstruction of AlfA from Bacillus subtilis reveals the structure of a simplified actin-like filament at 3.4-Å resolution

Low copy-number plasmid pLS32 of Bacillus subtilis subsp. natto contains a partitioning system that ensures segregation of plasmid copies during cell division. The partitioning locus comprises actin-like protein AlfA, adaptor protein AlfB, and the centromeric sequence parN Similar to the ParMRC partitioning system from Escherichia coli plasmid R1, AlfA filaments form actin-like double helical filaments that arrange into an antiparallel bipolar spindle, which attaches its growing ends to sister plasmids through interactions with AlfB and parN Because, compared with ParM and other actin-like proteins, AlfA is highly diverged in sequence, we determined the atomic structure of nonbundling AlfA filaments to 3.4-Å resolution by cryo-EM. The structure reveals how the deletion of subdomain IIB of the canonical actin fold has been accommodated by unique longitudinal and lateral contacts, while still enabling formation of left-handed, double helical, polar and staggered filaments that are architecturally similar to ParM. Through cryo-EM reconstruction of bundling AlfA filaments, we obtained a pseudoatomic model of AlfA doublets: the assembly of two filaments. The filaments are antiparallel, as required by the segregation mechanism, and exactly antiphasic with near eightfold helical symmetry, to enable efficient doublet formation. The structure of AlfA filaments and doublets shows, in atomic detail, how deletion of an entire domain of the actin fold is compensated by changes to all interfaces so that the required properties of polymerization, nucleotide hydrolysis, and antiparallel doublet formation are retained to fulfill the system's biological raison d'être.

DNA gyrase activity regulates DnaA-dependent replication initiation in Bacillus subtilis

In bacteria, initiation of DNA replication requires the DnaA protein. Regulation of DnaA association and activity at the origin of replication, oriC, is the predominant mechanism of replication initiation control. One key feature known to be generally important for replication is DNA topology. Although there have been some suggestions that topology may impact replication initiation, whether this mechanism regulates DnaA-mediated replication initiation is unclear. We found that the essential topoisomerase, DNA gyrase, is required for both proper binding of DnaA to oriC as well as control of initiation frequency in Bacillus subtilis. Furthermore, we found that the regulatory activity of gyrase in initiation is specific to DnaA and oriC. Cells initiating replication from a DnaA-independent origin, oriN, are largely resistant to gyrase inhibition by novobiocin, even at concentrations that compromise survival by up to four orders of magnitude in oriC cells. Furthermore, inhibition of gyrase does not impact initiation frequency in oriN cells. Additionally, deletion or overexpression of the DnaA regulator, YabA, significantly modulates sensitivity to gyrase inhibition, but only in oriC and not oriN cells. We propose that gyrase is a negative regulator of DnaA-dependent replication initiation from oriC, and that this regulatory mechanism is required for cell survival.

A minireplicon of plasmid pBMB26 represents a new typical replicon in the megaplasmids of Bacillus cereus group

A new minireplicon (rep26 minireplicon) from pBMB26, the 188 kb indigenous plasmid related to spore-crystal association (SCA) phenotype in Bacillus thuringiensis strain YBT-020, was characterized. A 12 kb EcoRI fragment, which encoded 10 putative open reading frames (ORFs), was capable of supporting replication when cloned in a replication probe vector. Deletion and frame shift mutation analysis showed that a 4.1 kb region encompassing two putative ORFs (orf21 and orf22) was essential for the plasmid replication in B. thuringiensis. Gene orf21 encoding a 49.8 kDa protein (named Rep26) with a helix-turn-helix motif showed no homology with known replication proteins and gene orf22 encoding a protein of 82.6 kDa showed homology to bacterial PcrA helicase. The replication origin of rep26 minireplicon was proved to be located in the coding region of orf21. Plasmid stability experiments indicated that the recombinant plasmid containing rep26 minireplicon has excellent segregational stability. BLASTP analysis revealed that amino acid sequences of ORF21 and ORF22 were well conserved among Bacillus cereus group strains. The rep26 minireplicon was widely distributed and could be defined as a new typical replicon in the megaplasmids of B. cereus group.

ZpdN, a Plasmid-Encoded Sigma Factor Homolog, Induces pBS32-Dependent Cell Death in Bacillus subtilis

The ancestral Bacillus subtilis strain 3610 contains an 84-kb plasmid called pBS32 that was lost during domestication of commonly used laboratory derivatives. Here we demonstrate that pBS32, normally present at 1 or 2 copies per cell, increases in copy number nearly 100-fold when cells are treated with the DNA-damaging agent mitomycin C. Mitomycin C treatment also caused cell lysis dependent on pBS32-borne prophage genes. ZpdN, a sigma factor homolog encoded by pBS32, was required for the plasmid response to DNA damage, and artificial expression of ZpdN was sufficient to induce pBS32 hyperreplication and cell death. Plasmid DNA released by cell death was protected by the capsid protein ZpbH, suggesting that the plasmid was packaged into a phagelike particle. The putative particles were further indicated by CsCl sedimentation but were not observed by electron microscopy and were incapable of killing B. subtilis cells extracellularly. We hypothesize that pBS32-mediated cell death releases a phagelike particle that is defective and unstable.

IMPORTANCE

Prophages are phage genomes stably integrated into the host bacterium's chromosome and less frequently are maintained as extrachromosomal plasmids. Here we report that the extrachromosomal plasmid pBS32 of Bacillus subtilis encodes a prophage that, when activated, kills the host. pBS32 also encodes both the sigma factor homolog ZpdN that is necessary and sufficient for prophage induction and the protein ComI, which is a potent inhibitor of DNA uptake by natural transformation. We provide evidence that the entire pBS32 sequence may be part of the prophage and thus that competence inhibition may be linked to lysogeny.

Genomic and Functional Characterization of the Unusual pLOCK 0919 Plasmid Harboring the spaCBA Pili Cluster in Lactobacillus casei LOCK 0919

Here, we report the extensive bioinformatic and functional analyses of the unusual pLOCK 0919, a plasmid originating from the probiotic Lactobacillus casei LOCK 0919 strain. This plasmid is atypical because it harbors the spaCBA-srtC gene cluster encoding SpaCBA pili. We show that all other spaCBA-srtC sequences of the Lactobacillus genus that have been previously described and deposited in GenBank are present in the chromosomal DNA. Another important observation for pLOCK 0919 is that the spaCBA-srtC gene cluster and its surrounding genes are highly similar to the respective DNA region that is present in the most well-known and active SpaCBA pili producer, the probiotic Lactobacillus rhamnosus GG strain. Our results demonstrate that the spaCBA-srtC clusters of pLOCK 0919 and L. rhamnosus GG are genealogically similar, located in DNA regions that are rich in transposase genes and are poorly conserved among the publicly available sequences of Lactobacillus sp. In contrast to chromosomally localized pilus gene clusters from L. casei and Lactobacillus paracasei, the plasmidic spaC of L. casei LOCK 0919 is expressed and undergoes a slight glucose-induced repression. Moreover, results of series of in vitro tests demonstrate that L. casei LOCK 0919 has an adhesion potential, which is largely determined by the presence of the pLOCK 0919 plasmid. In particular, the plasmid occurrence positively influenced the hydrophobicity and aggregation abilities of L. casei LOCK 0919. Moreover, in vivo studies indicate that among the three Lactobacillus strains used to colonize the gastrointestinal tract of germ-free mice, already after 2 days of colonization, L. casei LOCK 0919 became the dominant strain and persisted there for at least 48 days.

Plasmids from Food Lactic Acid Bacteria: Diversity, Similarity, and New Developments

Plasmids are widely distributed in different sources of lactic acid bacteria (LAB) as self-replicating extrachromosomal genetic materials, and have received considerable attention due to their close relationship with many important functions as well as some industrially relevant characteristics of the LAB species. They are interesting with regard to the development of food-grade cloning vectors. This review summarizes new developments in the area of lactic acid bacteria plasmids and aims to provide up to date information that can be used in related future research.

A complex path for domestication of B. subtilis sociality

Microorganisms adapt to the lab environment by eliminating unnecessary genetic systems. In Bacillus subtilis, such adaptation resulted in the lab strain being unable to form complex, matrix-associated structures known as biofilms. We recently showed that the ancestor of the lab strain, which is considered by the research community to be a stereotypical 'wild' strain, carries an atypical mutation in the RapP-PhrP quorum-sensing system. We have found that this mutation has profound effects on the biofilm phenotype of the ancestral strain. Here we discuss these recent findings and present more data that focuses on the lessons that can be learned from this work on the domestication of microorganisms.

Accessory factors promote AlfA-dependent plasmid segregation by regulating filament nucleation, disassembly, and bundling

In bacteria, some plasmids are partitioned to daughter cells by assembly of actin-like proteins (ALPs). The best understood ALP, ParM, has a core set of biochemical properties that contributes to its function, including dynamic instability, spontaneous nucleation, and bidirectional elongation. AlfA, an ALP that pushes plasmids apart in Bacillus, relies on a different set of underlying properties to segregate DNA. AlfA elongates unidirectionally and is not dynamically unstable; its assembly and disassembly are regulated by a cofactor, AlfB. Free AlfB breaks up AlfA bundles and promotes filament turnover. However, when AlfB is bound to the centromeric DNA sequence, parN, it forms a segrosome complex that nucleates and stabilizes AlfA filaments. When reconstituted in vitro, this system creates polarized, motile comet tails that associate by antiparallel filament bundling to form bipolar, DNA-segregating spindles.

Plasmid-encoded ComI inhibits competence in the ancestral 3610 strain of Bacillus subtilis

Natural competence is a process by which bacteria construct a membrane-associated machine for the uptake and integration of exogenous DNA. Many bacteria harbor genes for the DNA uptake machinery and yet are recalcitrant to DNA uptake for unknown reasons. For example, domesticated laboratory strains of Bacillus subtilis are renowned for high-frequency natural transformation, but the ancestral B. subtilis strain NCIB3610 is poorly competent. Here we find that endogenous plasmid pBS32 encodes a small protein, ComI, that inhibits transformation in the 3610 strain. ComI is a single-pass trans-membrane protein that appears to functionally inhibit the competence DNA uptake machinery. Functional inhibition of transformation may be common, and abolishing such inhibitors could be the key to permitting convenient genetic manipulation of a variety of industrially and medically relevant bacteria.

Identification of a replication initiation protein of the pVV8 plasmid from Thermus thermophilus HB8

Recently, the extremely thermophilic bacterium Thermus thermophilus HB8 has been demonstrated to harbor a circular plasmid designated by pVV8 in addition to two well-known plasmids, pTT8 and pTT27, and its entire sequence has been determined. The absence of any obvious replication initiation gene in the 81.2 kb plasmid prompted us to isolate its minimum replicon. By in vivo replication assays with fragments deleted in a stepwise manner, a minimum replicon containing a single ORF, TTHV001, was identified. A protein encoded by TTHV001 showed no amino acid sequence similarity to other function-known proteins. As the results of in vivo and in vitro experiments strongly suggested that the TTHV001 protein was involved in the replication initiation of pVV8, the protein and the gene were referred to as RepV and repV, respectively. The RepV protein binds to an inverted repeat sequence within its own repV gene and then triggers the unwinding of the DNA duplex in an A + T-rich region located just downstream from the inverted repeat. The in vivo replication assays with minimum replicon mutants in the RepV binding site or the unwinding region demonstrated that the unwinding in the region by the RepV binding was essential for pVV8 replication initiation.

The Bacillus subtilis conjugative transposon ICEBs1 mobilizes plasmids lacking dedicated mobilization functions

Integrative and conjugative elements (ICEs, also known as conjugative transposons) are mobile elements that are found integrated in a host genome and can excise and transfer to recipient cells via conjugation. ICEs and conjugative plasmids are found in many bacteria and are important agents of horizontal gene transfer and microbial evolution. Conjugative elements are capable of self-transfer and also capable of mobilizing other DNA elements that are not able to self-transfer. Plasmids that can be mobilized by conjugative elements are generally thought to contain an origin of transfer (oriT), from which mobilization initiates, and to encode a mobilization protein (Mob, a relaxase) that nicks a site in oriT and covalently attaches to the DNA to be transferred. Plasmids that do not have both an oriT and a cognate mob are thought to be nonmobilizable. We found that Bacillus subtilis carrying the integrative and conjugative element ICEBs1 can transfer three different plasmids to recipient bacteria at high frequencies. Strikingly, these plasmids do not have dedicated mobilization-oriT functions. Plasmid mobilization required conjugation proteins of ICEBs1, including the putative coupling protein. In contrast, plasmid mobilization did not require the ICEBs1 conjugative relaxase or cotransfer of ICEBs1, indicating that the putative coupling protein likely interacts with the plasmid replicative relaxase and directly targets the plasmid DNA to the ICEBs1 conjugation apparatus. These results blur the current categorization of mobilizable and nonmobilizable plasmids and indicate that conjugative elements play a role in horizontal gene transfer even more significant than previously recognized.

The replication origin of a repABC plasmid

Background

repABC operons are present on large, low copy-number plasmids and on some secondary chromosomes in at least 19 α-proteobacterial genera, and are responsible for the replication and segregation properties of these replicons. These operons consist, with some variations, of three genes: repA, repB, and repC. RepA and RepB are involved in plasmid partitioning and in the negative regulation of their own transcription, and RepC is the limiting factor for replication. An antisense RNA encoded between the repB-repC genes modulates repC expression.

Results

To identify the minimal region of the Rhizobium etli p42d plasmid that is capable of autonomous replication, we amplified different regions of the repABC operon using PCR and cloned the regions into a suicide vector. The resulting vectors were then introduced into R. etli strains that did or did not contain p42d. The minimal replicon consisted of a repC open reading frame under the control of a constitutive promoter with a Shine-Dalgarno sequence that we designed. A sequence analysis of repC revealed the presence of a large A+T-rich region but no iterons or DnaA boxes. Silent mutations that modified the A+T content of this region eliminated the replication capability of the plasmid. The minimal replicon could not be introduced into R. etli strain containing p42d, but similar constructs that carried repC from Sinorhizobium meliloti pSymA or the linear chromosome of Agrobacterium tumefaciens replicated in the presence or absence of p42d, indicating that RepC is an incompatibility factor. A hybrid gene construct expressing a RepC protein with the first 362 amino acid residues from p42d RepC and the last 39 amino acid residues of RepC from SymA was able to replicate in the presence of p42d.

Conclusions

RepC is the only element encoded in the repABC operon of the R. etli p42d plasmid that is necessary and sufficient for plasmid replication and is probably the initiator protein. The oriV of this plasmid resides within the repC gene and is located close to or inside of a large A+T region. RepC can act as an incompatibility factor, and the last 39 amino acid residues of the carboxy-terminal region of this protein are involved in promoting this phenotype.

Functional analysis of the stability determinant AlfB of pBET131, a miniplasmid derivative of bacillus subtilis (natto) plasmid pLS32

Bacillus subtilis plasmid pBET131 is a derivative of pLS32, which was isolated from a natto strain of Bacillus subtilis. The DNA region in pBET131 that confers segregational stability contains an operon consisting of three genes, of which alfA, encoding an actin-like ATPase, and alfB are essential for plasmid stability. In this work, the alfB gene product and its target DNA region were studied in detail. Transcription of the alf operon initiated from a sigma(A)-type promoter was repressed by the alfB gene product. Overproduction of AlfA was inhibitory to cell growth, suggesting that the repression of the alf operon by AlfB is important for maintaining appropriate levels of AlfA. An electrophoretic mobility shift assay and footprinting analysis with purified His-tagged AlfB showed that it bound to a DNA region containing three tandem repeats of 8-bp AT-rich sequence (here designated parN), which partially overlaps the -35 sequence of the promoter. A sequence alteration in the first or third repeat did not affect the AlfB binding and plasmid stability, whereas that in the second repeat resulted in inhibition of these phenomena. The repression of alfA-lacZ expression was observed in the constructs carrying a mutation in either the first or third repeat, but not in the second repeat, indicating a correlation between plasmid stability, AlfB binding, and repression. It was also demonstrated by the yeast two-hybrid system that AlfA and AlfB interact with each other and among themselves. From these results, it was concluded that AlfB participates in partitioning pBET131 by forming a complex with AlfA and parN, the mode of which is typified by the type II partition mechanism.

The structure and assembly dynamics of plasmid actin AlfA imply a novel mechanism of DNA segregation

Bacterial cytoskeletal proteins participate in a variety of processes, including cell division and DNA segregation. Polymerization of one plasmid-encoded, actin-like protein, ParM, segregates DNA by pushing two plasmids in opposite directions and forms the current paradigm for understanding active plasmid segregation. An essential feature of ParM assembly is its dynamically instability, the stochastic switching between growth and disassembly. It is unclear whether dynamic instability is an essential feature of all actin-like protein-based segregation mechanisms or whether bacterial filaments can segregate plasmids by different mechanisms. We expressed and purified AlfA, a plasmid-segregating actin-like protein from Bacillus subtilis, and found that it forms filaments with a unique structure and biochemistry; AlfA nucleates rapidly, polymerizes in the presence of ATP or GTP, and forms highly twisted, ribbon-like, helical filaments with a left-handed pitch and protomer nucleotide binding pockets rotated away from the filament axis. Intriguingly, AlfA filaments spontaneously associate to form uniformly sized, mixed-polarity bundles. Most surprisingly, our biochemical characterization revealed that AlfA does not display dynamic instability and is relatively stable in the presence of diphosphate nucleotides. These results (i) show that there is remarkable structural diversity among bacterial actin filaments and (ii) indicate that AlfA filaments partition DNA by a novel mechanism.

The RepA_N replicons of Gram-positive bacteria: a family of broadly distributed but narrow host range plasmids

The pheromone-responsive conjugative plasmids of Enterococcus faecalis and the multiresistance plasmids pSK1 and pSK41 of Staphylococcus aureus are among the best studied plasmids native to Gram-positive bacteria. Although these plasmids seem largely restricted to their native hosts, protein sequence comparison of their replication initiator proteins indicates that they are clearly related. Homology searches indicate that these replicons are representatives of a large family of plasmids and a few phage that are widespread among the low G+C Gram-positive bacteria. We propose to name this family the RepA_N family of replicons after the annotated conserved domain that the initiator protein contains. Detailed sequence comparisons indicate that the initiator protein phylogeny is largely congruent with that of the host, suggesting that the replicons have evolved along with their current hosts and that intergeneric transfer has been rare. However, related proteins were identified on chromosomal regions bearing characteristics indicative of ICE elements, and the phylogeny of these proteins displayed evidence of more frequent intergeneric transfer. Comparison of stability determinants associated with the RepA_N replicons suggests that they have a modular evolution as has been observed in other plasmid families.

Molecular analysis of the replication region of the pCIZ2 plasmid from the multiple bacteriocin producer strain Enterococcus faecium L50

The sequence analysis of the 7383 bp plasmid pCIZ2 from Enterococcus faecium L50 enabled the identification of a DNA region involved in its replication. The structural organization of the pCIZ2 replication region is highly similar to those of well-known theta-replicating plasmids. It contains an untranslated region, the putative replication origin (ori), constituted by two sets of direct repeats of 12 and 22 bp (iterons), and followed by three open-reading frames (orf8 to orf10). orf8 encodes the replication initiation protein (RepE). The transcriptional start site of the replication locus was identified 13 nucleotides upstream of the repE start codon. A two-dimensional agarose gel electrophoresis analysis revealed pCIZ2 intermediates profile typical of the theta-type replication mechanism. Subcloning of different DNA fragments of the pCIZ2 replication region in Escherichia coli and, subsequently, in the plasmidless E. faecium L50/14-2 allowed the determination of the minimal replicon on a 1.2kb DNA fragment containing only the overall ori and repE which also act in trans. The involvement of orf9 in the plasmid copy number and in the plasmid stability was investigated. The pCIZ2 recombinant plasmids constitute narrow-host range shuttle cloning vectors (E. coli-E. faecium) that could be very useful for enterococcal genes studies, allowing an easy identification due to their histochemical recognition.

High-precision, whole-genome sequencing of laboratory strains facilitates genetic studies

Whole-genome sequencing is a powerful technique for obtaining the reference sequence information of multiple organisms. Its use can be dramatically expanded to rapidly identify genomic variations, which can be linked with phenotypes to obtain biological insights. We explored these potential applications using the emerging next-generation sequencing platform Solexa Genome Analyzer, and the well-characterized model bacterium Bacillus subtilis. Combining sequencing with experimental verification, we first improved the accuracy of the published sequence of the B. subtilis reference strain 168, then obtained sequences of multiple related laboratory strains and different isolates of each strain. This provides a framework for comparing the divergence between different laboratory strains and between their individual isolates. We also demonstrated the power of Solexa sequencing by using its results to predict a defect in the citrate signal transduction pathway of a common laboratory strain, which we verified experimentally. Finally, we examined the molecular nature of spontaneously generated mutations that suppress the growth defect caused by deletion of the stringent response mediator relA. Using whole-genome sequencing, we rapidly mapped these suppressor mutations to two small homologs of relA. Interestingly, stable suppressor strains had mutations in both genes, with each mutation alone partially relieving the relA growth defect. This supports an intriguing three-locus interaction module that is not easily identifiable through traditional suppressor mapping. We conclude that whole-genome sequencing can drastically accelerate the identification of suppressor mutations and complex genetic interactions, and it can be applied as a standard tool to investigate the genetic traits of model organisms.

In this manuscript, we describe novel applications of the newly developed Solexa sequencing technology. We aim to provide insights into the following questions: (1) Can whole-genome sequencing, while rapidly surveying mega-bases of genome information, also reliably identify variations at the base-pair resolution? (2) Can it be used to identify the differences between isolates of the same laboratory strain and between different laboratory strains? (3) Can it be used as a genetic tool to predict phenotypes and identify suppressors? To this end, we performed whole-genome shotgun sequencing of several related strains of the widely studied model bacterium Bacillus subtilis, we identified genomic variations that potentially underlie strain-specific phenotypes, which occur frequently in biological studies, and we found multiple suppressor mutations within a single strain that are difficult to discern through traditional methods. We conclude that whole-genome sequencing can be directly used to guide genetic studies.

Characterization of an active partition system for the Enterococcus faecalis pheromone-responding plasmid pAD1

Enterococcus faecalis plasmid pAD1 is a 60-kb conjugative, low-copy-number plasmid that encodes a mating response to the peptide sex pheromone cAD1 and a cytolytic exotoxin that contributes to virulence. Although aspects of conjugation have been studied extensively, relatively little is known about the control of pAD1 maintenance. Previous work on pAD1 identified a 5-kb region of DNA sufficient to support replication, copy control, and stable inheritance (K. E. Weaver, D. B. Clewell, and F. An, J. Bacteriol. 175:1900-1909, 1993), and recently, the pAD1 replication initiator (RepA) and the origin of vegetative replication (oriV) were characterized (M. V. Francia, S. Fujimoto, P. Tille, K. E. Weaver, and D. B. Clewell, J. Bacteriol. 186:5003-5016, 2004). The present study focuses on the adjacent determinants repB and repC, as well as a group of 25 8-bp direct repeats (iterons with the consensus sequence TAGTARRR) located between the divergently transcribed repA and repB. Through mutagenesis and trans-complementation experiments, RepB (a 33-kDa protein, a member of the ParA superfamily of ATPases) and RepC (a protein of 14.4 kDa) were shown to be required for maximal stabilization. Both were active in trans. The iteron region was shown to act as the pAD1 centromere-like site. Purified RepC was shown by DNA mobility shift and DNase I footprinting analyses to interact in a sequence-specific manner with the iteron repeats upstream of the repBC locus. The binding of RepC to the iteron region was shown to be modified by RepB in the presence of ATP via a possible interaction with the RepC-iteron complex. RepB did not bind to the iteron region in the absence of RepC.

Properties of Enterococcus faecalis plasmid pAD1, a member of a widely disseminated family of pheromone-responding, conjugative, virulence elements encoding cytolysin

The 60-kb pAD1 represents a large and widely disseminated family of conjugative, pheromone-responding, virulence plasmids commonly found in clinical isolates of Enterococcus faecalis. It encodes a hemolysin/bacteriocin (cytolysin) shown to contribute to virulence in animal models, and the related bacteriocin is active against a wide variety of Gram-positive bacteria. This review summarizes what is currently known about the molecular biology of pAD1, including aspects of its cytolytic, UV-resistance, replication, maintenance, and conjugative properties.

Emerging plasmid-encoded antisense RNA regulated systems

Classic antisense RNA research has focused on detailed examination of a few plasmid-encoded systems whilst more recent efforts have focused on chromosomally encoded small RNAs. Recent work on newly identified plasmid-encoded antisense RNAs suggest that there is still much to learn from them about the versatility of regulatory RNAs. The alpha-proteobacterial repABC plasmids produce an antisense RNA that regulates the replication initiator independently of the partition proteins encoded in the same operon. The Staphylococcus aureus plasmid pSK41 produces an antisense RNA that regulates the replication initiator protein by a translational attenuation mechanism. Enterococcus faecalis pheromone-responsive plasmids produce plasmid-specific variants of an antisense RNA that regulates conjugation structural genes by a transcriptional attenuation mechanism. E. faecalis plasmid pAD1 encodes an antisense RNA-regulated addiction module that combines features of classic plasmid-encoded and trans-regulated chromosomally encoded antisense systems. Studies on these systems will expand our understanding of the repertoire of small RNA regulators.

DNA segregation by the bacterial actin AlfA during Bacillus subtilis growth and development

We here identify a protein (AlfA; actin like filament) that defines a new family of actins that are only distantly related to MreB and ParM. AlfA is required for segregation of Bacillus subtilis plasmid pBET131 (a mini pLS32-derivative) during growth and sporulation. A 3-kb DNA fragment encoding alfA and a downstream gene (alfB) is necessary and sufficient for plasmid stability. AlfA-GFP assembles dynamic cytoskeletal filaments that rapidly turn over (t(1/2)< approximately 45 s) in fluorescence recovery after photobleaching experiments. A point mutation (alfA D168A) that completely inhibits AlfA subunit exchange in vivo is strongly defective for plasmid segregation, demonstrating that dynamic polymerization of AlfA is necessary for function. During sporulation, plasmid segregation occurs before septation and independently of the DNA translocase SpoIIIE and the chromosomal Par proteins Soj and Spo0J. The absence of the RacA chromosome anchoring protein reduces the efficiency of plasmid segregation (by about two-fold), suggesting that it might contribute to anchoring the plasmid at the pole during sporulation. Our results suggest that the dynamic polymerization of AlfA mediates plasmid separation during both growth and sporulation.

Sequence analysis of the lactococcal plasmid pNP40: a mobile replicon for coping with environmental hazards

The conjugative lactococcal plasmid pNP40, identified in Lactococcus lactis subsp. diacetylactis DRC3, possesses a potent complement of bacteriophage resistance systems, which has stimulated its application as a fitness-improving, food-grade genetic element for industrial starter cultures. The complete sequence of this plasmid allowed the mapping of previously known functions including replication, conjugation, bacteriocin resistance, heavy metal tolerance, and bacteriophage resistance. In addition, functions for cold shock adaptation and DNA damage repair were identified, further confirming pNP40's contribution to environmental stress protection. A plasmid cointegration event appears to have been part of the evolution of pNP40, resulting in a "stockpiling" of bacteriophage resistance systems.

Identification of putative DnaN-binding motifs in plasmid replication initiation proteins

Recently the plasmid RK2 replication initiation protein, TrfA, has been shown to bind to the beta subunit of DNA Polymerase III (DnaN) via a short pentapeptide with the consensus QL[S/D]LF. A second consensus peptide, the hexapeptide QLxLxL, has also been demonstrated to mediate binding to DnaN. Here we describe the results of a comprehensive survey of replication initiation proteins encoded by bacterial plasmids to identify putative DnaN-binding sites. Both pentapeptide and hexapeptide motifs have been identified in a number of families of replication initiation proteins. The distribution of sites is sporadic and closely related families of proteins may differ in the presence, location, or type of putative DnaN-binding motif. Neither motif has been identified in replication initiation proteins encoded by plasmids that replicate via rolling circles or strand displacement. The results suggest that the recruitment of DnaN to the origin of replication of a replisome by plasmid replication initiation proteins is not generally required for plasmid replication, but that in some cases it may be beneficial for efficiency of replication initiation.

Characterization of the theta-type plasmid pCD3.4 from Carnobacterium divergens, and modulation of its host range by RepA mutation

The complete nucleotide sequence of the 3475 bp plasmid pCD3.4 from Carnobacterium divergens LV13, which encodes the bacteriocin divergicin A, was determined. Nucleotide sequence, deletion and complementation analyses revealed the presence of a trans-acting replication protein, RepA, and DNA sequences involved in plasmid replication and copy-number control. The DNA region preceding the repA gene probably contains the origin of replication. This sequence includes four and a half direct repeats (iterons) of 22 bp, to which RepA is thought to bind, and an AT-rich region containing a 12 bp repeat, at which initiation of DNA might occur. Further upstream of this sequence resides a fifth iteron required for optimal plasmid replication. The RepA protein shows homology to replication proteins of the pUCL287 subfamily of theta-type replicons. Two ORFs were found downstream of the repA gene that could be deleted without affecting replication and stability of the plasmid. pCD3.4 has a narrow host range, and could only be maintained in Carnobacterium spp.; however, a mutant of the plasmid was obtained that enabled the pCD3.4 replicon to replicate in Enterococcus faecium, but not in Carnobacterium spp. The mutation was located in the C-terminal region of the RepA protein, changing a proline into a serine. This is believed to be the first example of such plasmid-host-range modulation in Gram-positive bacteria.

Characterization of the replication region of plasmid pLS32 from the Natto strain of Bacillus subtilis

Plasmid pL32 from the Natto strain of Bacillus subtilis belongs to a group of low-copy-number plasmids in gram-positive bacteria that replicate via a theta mechanism of replication. We studied the DNA region encoding the replication protein, RepN, of pLS32, and obtained the following results. Transcription of the repN gene starts 167 nucleotides upstream from the translational start site of repN. The copy number of repN-coding plasmid pHDCS2, in which the repN gene was placed downstream of the IPTG (isopropyl-1-thio-beta-D-galactopyranoside)-inducible Pspac promoter, was increased 100 fold by the addition of IPTG. Histidine-tagged RepN bound to a specific region in the repN gene containing five 22-bp tandem repeats (iterons) with partial mismatches, as shown by gel retardation and foot printing analyses. Sequence alterations in the first three iterons resulted in an increase in plasmid copy number, whereas those in either the forth or fifth iteron resulted in the failure of plasmid replication. The iterons expressed various degrees of incompatibility with an incoming repN-driven replicon pSEQ243, with the first three showing the strongest incompatibility. Finally, by using a plasmid, pHDMAEC21, carrying the sequence alterations in all the five iterons in repN and thus unable to replicate but encoding intact RepN, the region necessary for replication was confined to a 96-bp sequence spanning the 3'-terminal half of the fourth iteron to an A+T-rich region located downstream of the fifth iteron. From these results, we conclude that the iterons in repN are involved in both the control of plasmid copy number and incompatibility, and we suggest that the binding of RepN to the last two iterons triggers replication by melting the A+T-rich DNA sequence.

Comparative analysis of physical maps of four Bacillus subtilis (natto) genomes

The complete SfiI and I-CeuI physical maps of four Bacillus subtilis (natto) strains, which were previously isolated as natto (fermented soybean) starters, were constructed to elucidate the genome structure. Not only the similarity in genome size and organization but also the microheterogeneity of the gene context was revealed. No large-scale genome rearrangements among the four strains were indicated by mapping of the genes, including 10 rRNA operons (rrn) and relevant genes required for natto production, to the loci corresponding to those of the B. subtilis strain Marburg 168. However, restriction fragment length polymorphism and the presence or absence of strain-specific DNA sequences, such as the prophages SP beta, skin element, and PBSX, as well as the insertion element IS4Bsu1, could be used to identify one of these strains as a Marburg type and the other three strains as natto types. The genome structure and gene heterogeneity were also consistent with the type of indigenous plasmids harbored by the strains.

Replication of Enterococcus faecalis pheromone-responding plasmid pAD1: location of the minimal replicon and oriV site and RepA involvement in initiation of replication

The hemolysin-determining plasmid pAD1 is a member of a widely disseminated family of highly conjugative elements commonly present in clinical isolates of Enterococcus faecalis. The determinants repA, repB, and repC, as well as adjacent iteron sequences, are believed to play important roles in pAD1 replication and maintenance. The repA gene encodes an initiator protein, whereas repB and repC encode proteins related to stability and copy number. The present study focuses specifically on repA and identifies a replication origin (oriV) within a central region of the repA determinant. A small segment of repA carrying oriV was able to support replication in cis of a plasmid vector otherwise unable to replicate, if an intact RepA was supplied in trans. We demonstrate that under conditions in which RepA is expressed from an artificial promoter, a segment of DNA carrying only repA is sufficient for stable replication in E. faecalis. We also show that RepA binds specifically to oriV DNA at several sites containing inverted repeat sequences (i.e., IR-1) and nonspecifically to single-stranded DNA, and related genetic analyses confirm that these sequences play an important role in replication. Finally, we reveal a relationship between the internal structure of RepA and its ability to recognize oriV. An in-frame deletion within repA resulting in loss of 105 nucleotides, including at least part of oriV, did not eliminate the ability of the altered RepA protein to initiate replication using an intact origin provided in trans. The relationship of RepA to other known initiator proteins is also discussed.

Staphylococcus aureus multiresistance plasmid pSK41: analysis of the replication region, initiator protein binding and antisense RNA regulation

The vast majority of large staphylococcal plasmids characterized to date appear to possess an evolutionarily common replication system, which has clearly had a major impact on the evolution of antimicrobial resistant staphylococci worldwide. Related systems have also been found in plasmids from other Gram-positive genera, including enterococci, streptococci and bacilli. The 46.4 kb plasmid pSK41 is the prototype of a family of conjugative staphylococcal multiresistance plasmids. The replication region of pSK41 encodes a protein product, Rep, which was shown to be essential for replication; mutations that truncated Rep could be complemented in trans. Rep was found to bind in vitro to four tandem repeat sequences located centrally within the rep coding region. An A + T-rich inverted repeat sequence upstream of rep was required for efficient replication, whereas no sequences downstream of rep were necessary. An antisense countertranscript, RNAI, encoded upstream of rep was identified and transcriptional start points for both RNAI and the rep-mRNA were defined.

A single gene on the staphylococcal multiresistance plasmid pSK1 encodes a novel partitioning system

The orf245 gene is located immediately upstream of, and divergently transcribed from, the replication initiation gene, rep, of the Staphylococcus aureus multiresistance plasmid pSK1, and related genes have been found in association with a range of evolutionarily distinct replication genes on plasmids from various gram-positive genera. orf245 has been shown previously to extend the segregational stability of a pSK1 minireplicon. Here we describe an investigation into the basis of orf245-mediated stabilization. orf245 was not found to influence transcription of pSK1 rep, indicating that it is not directly involved in plasmid replication. This was confirmed by demonstrating that orf245 is able to enhance the segregational stability of heterologous theta- and rolling-circle-replicating replicons, suggesting that it encodes a plasmid maintenance function. Evidence inconsistent with postsegregational killing and multimer resolution mechanisms was obtained; however, the intergenic region upstream of orf245 was found to mediate orf245-dependent incompatibility, as would be expected if it encodes a cis-acting centromere-like site. Taken together, these findings implicate active partitioning as the probable basis of the activity of orf245, which is therefore redesignated par. Since it is unrelated to any gene known to play a role in plasmid segregation, it seems likely that pSK1 par potentially represents the prototype of a novel class of active partitioning systems that are distinguished by their capacity to enhance plasmid segregational stability via a single protein-encoding gene.

Bacillus subtilis soil isolates: plasmid replicon analysis and construction of a new theta-replicating vector

We have searched for plasmids in a collection of 55 Bacillus subtilis strains isolated from various natural sources of the territory of Belarus. Twenty percent of the strains contained one or two plasmids of either 6-8 or approximately 90 kb. Small plasmids were shown to carry a rolling circle replicon of the pC194 type. Four out of the eight large plasmids contained a related theta replicon that has no homolog in databases as shown by sequence determination. A B. subtilis/Escherichia coli shuttle vector based on this replicon was constructed. It has a low copy number (6 units per chromosome) and is stably inherited in B. subtilis. It might thus be a useful tool for DNA cloning. These data extend previous observations, indicating that most of the small plasmids of B. subtilis replicate as rolling circles and belong to the pC194 family. On the contrary, large plasmids appear to form a large pool of theta-replicating determinants, since three different replicons have already been isolated from them.

Structural maintenance of chromosomes protein of Bacillus subtilis affects supercoiling in vivo

Structural maintenance of chromosomes (SMC) proteins are found in nearly all organisms. Members of this protein family are involved in chromosome condensation and sister chromatid cohesion. Bacillus subtilis SMC protein (BsSMC) plays a role in chromosome organization and partitioning. To better understand the function of BsSMC, we studied the effects of an smc null mutation on DNA supercoiling in vivo. We found that an smc null mutant was hypersensitive to the DNA gyrase inhibitors coumermycin A1 and norfloxacin. Furthermore, depleting cells of topoisomerase I substantially suppressed the partitioning defect of an smc null mutant. Plasmid DNA isolated from an smc null mutant was more negatively supercoiled than that from wild-type cells. In vivo cross-linking experiments indicated that BsSMC was bound to the plasmid. Our results indicate that BsSMC affects supercoiling in vivo, most likely by constraining positive supercoils, an activity which contributes to chromosome compaction and organization.

Two separate DNA sequences within oriC participate in accurate chromosome segregation in Bacillus subtilis

Current views of bacterial chromosome segregation vary in respect of the likely presence or absence of an active segregation mechanism involving a mitotic-like apparatus. Furthermore, little is known about cis-acting elements for chromosome segregation in bacteria. In this report, we show that two separate DNA regions, a 3' coding region of dnaA and the AT-rich sequence between dnaA and dnaN (the initial opening site of duplex DNA during replication), are necessary for efficient segregation of the chromosome in Bacillus subtilis. When a plasmid replicon was integrated into argG, far from oriC, on the chromosome and then the oriC function was disrupted, the oriC-deleted mutant formed anucleate cells at 5% possibly because of defects in chromosome segregation. However, when the two DNA sequences were added near oriN, frequency of anucleate cells decreased to 1%. In these cells, the origin (argG) regions were localized near cell poles, whereas they were randomly distributed in cells without the two DNA sequences. These results suggest that the two DNA sequences in and downstream of the dnaA gene participate in correct positioning of the replication origin region within the cell and that this function is associated with accurate chromosome segregation in B. subtilis.

Complete nucleotide sequence of a Staphylococcus aureus exfoliative toxin B plasmid and identification of a novel ADP-ribosyltransferase, EDIN-C

The complete nucleotide sequence of pETB, a 38.2-kb Staphylococcus aureus plasmid encoding the exfoliative toxin B (ETB), was determined. A total of 50 open reading frames were identified on the plasmid genome and, among these, 32 showed sequence similarity to known proteins. pETB contains three copies of IS257, which divide the pETB genome into three regions: (i) a cadmium resistance operon-containing region, (ii) a lantibiotic production gene-containing region, and (iii) the remaining part where genes for plasmid replication and/or maintenance are dispersed. In the third region, genes of various kinds of functions are present among the replication- and maintenance-related genes. They include two virulence-related genes, the etb gene and a gene encoding a novel ADP-ribosyltransferase closely related to EDIN, which belongs to the C3 family of ADP-ribosyltransferases modifying Rho GTPases. They also include genes for a cell wall-anchoring surface protein and a phage resistance protein. Based on the determined sequence of pETB, the genome structures of etb-bearing plasmids (ETB plasmids) from various clinical isolates were analyzed by the PCR scanning method. The data indicate that, although the ETB plasmids are highly heterogeneous in genome size, the fundamental genome organization is well conserved. The size variation of the plasmid is mainly attributed to defined regions which may be hot spots for gene shuffling.

Replication of staphylococcal multiresistance plasmids

Based on structural and functional properties, three groups of large staphylococcal multiresistance plasmids have been recognized, viz., the pSK1 family, pSK41-like conjugative plasmids, and beta-lactamase-heavy-metal resistance plasmids. Here we describe an analysis of the replication functions of a representative of each of these plasmid groups. The replication initiation genes from the Staphylococcus aureus plasmids pSK1, pSK41, and pI9789::Tn552 were found to be related to each other and to the Staphylococcus xylosus plasmid pSX267 and are also related to rep genes of several plasmids from other gram-positive genera. Nucleotide sequence similarity between pSK1 and pI9789::Tn552 extended beyond their rep genes, encompassing upstream divergently transcribed genes, orf245 and orf256, respectively. Our analyses revealed that genes encoding proteins related to the deduced orf245 product are variously represented, in several types of organization, on plasmids possessing six seemingly evolutionarily distinct types of replication initiation genes and including both theta-mode and rolling-circle replicons. Construction of minireplicons and subsequent functional analysis demonstrated that orf245 is required for the segregational stability of the pSK1 replicon. In contrast, no gene equivalent to orf245 is evident on the conjugative plasmid pSK41, and a minireplicon encoding only the pSK41 rep gene was found to exhibit a segregational stability approaching that of the parent plasmid. Significantly, the results described establish that many of the large multiresistance plasmids that have been identified in clinical staphylococci, which were formerly presumed to be unrelated, actually utilize an evolutionarily related theta-mode replication system.

Identification of four loci isolated from two Streptococcus thermophilus phage genomes responsible for mediating bacteriophage resistance

Sequence data derived from the Streptococcus thermophilus phages phiO1205 and phi7201 indicated that each of these phages contains a distinct DNA region dedicated to replication. Southern blotting experiments showed that phages infecting S. thermophilus may be divided into at least two groups, each containing the presumptive replication functions of either &phi;O1205 (group I) or &phi;7201 (group II). Specific regions from the putative replication module of each of the two phages were examined for their ability to provide phage resistance.

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.