Insertional gene fusion technology

Design and biocatalytic applications of genetically fused multifunctional enzymes

Fusion proteins, understood as those created by joining two or more genes that originally encoded independent proteins, have numerous applications in biotechnology, from analytical methods to metabolic engineering. The use of fusion enzymes in biocatalysis may be even more interesting due to the physical connection of enzymes catalyzing successive reactions into covalently linked complexes. The proximity of the active sites of two enzymes in multi-enzyme complexes can make a significant contribution to the catalytic efficiency of the reaction. However, the physical proximity of the active sites does not guarantee this result. Other aspects, such as the nature and length of the linker used for the fusion or the order in which the enzymes are fused, must be considered and optimized to achieve the expected increase in catalytic efficiency. In this review, we will relate the new advances in the design, creation, and use of fused enzymes with those achieved in biocatalysis over the past 20 years. Thus, we will discuss some examples of genetically fused enzymes and their application in carbon‑carbon bond formation and oxidative reactions, generation of chiral amines, synthesis of carbohydrates, biodegradation of plant biomass and plastics, and in the preparation of other high-value products.

Development and characterization of a thermostable GH11/GH10 xylan degrading chimeric enzyme

Xylanases are categorized into different family groups, two of which are glycoside hydrolases 10 (GH10) and 11 (GH11) families. These well-characterized xylanases demonstrate different modes of action in hydrolysis of xylans. Imitating certain types of microorganisms to produce bifunctional enzymes such as engineered xylanases has gained considerable attention among researchers. In this study, a recombinant chimeric enzyme (X11-10) was designed by fusing two thermostable xylanases through a peptide linker. The recombinant parental enzymes, xylanase 10 from fungus Bispora sp. MEY-1 (X10) and xylanase 11 from bacterium Thermobacillus xylanilyticus (X11), and their chimera were successfully expressed in Pichia pastoris (P. pastoris), purified, and characterized. Being active over a wide pH range, X11-10 chimera showed higher thermal stability, possessed a lower K_m, and a higher catalytic efficiency (k_cat/K_m) in comparison to the parental enzymes. Also, molecular dynamics simulation (MDS) of X11-10 revealed that its active site residues were free to interact with substrate. This novel chimeric xylanase may have potential applications in different industrial processes since it can substitute two separate enzymes and therefore minimize the production costs.

Nature Inspired Multienzyme Immobilization: Strategies and Concepts

In a biological system, the spatiotemporal arrangement of enzymes in a dense cellular milieu, subcellular compartments, membrane-associated enzyme complexes on cell surfaces, scaffold-organized proteins, protein clusters, and modular enzymes have presented many paradigms for possible multienzyme immobilization designs that were adapted artificially. In metabolic channeling, the catalytic sites of participating enzymes are close enough to channelize the transient compound, creating a high local concentration of the metabolite and minimizing the interference of a competing pathway for the same precursor. Over the years, these phenomena had motivated researchers to make their immobilization approach naturally realistic by generating multienzyme fusion, cluster formation via affinity domain-ligand binding, cross-linking, conjugation on/in the biomolecular scaffold of the protein and nucleic acids, and self-assembly of amphiphilic molecules. This review begins with the discussion of substrate channeling strategies and recent empirical efforts to build it synthetically. After that, an elaborate discussion covering prevalent concepts related to the enhancement of immobilized enzymes' catalytic performance is presented. Further, the central part of the review summarizes the progress in nature motivated multienzyme assembly over the past decade. In this section, special attention has been rendered by classifying the nature-inspired strategies into three main categories: (i) multienzyme/domain complex mimic (scaffold-free), (ii) immobilization on the biomolecular scaffold, and (iii) compartmentalization. In particular, a detailed overview is correlated to the natural counterpart with advances made in the field. We have then discussed the beneficial account of coassembly of multienzymes and provided a synopsis of the essential parameters in the rational coimmobilization design.

A computational method for the design of nested proteins by loop-directed domain insertion

The computational design of novel nested proteins-in which the primary structure of one protein domain (insert) is flanked by the primary structure segments of another (parent)-would enable the generation of multifunctional proteins. Here we present a new algorithm, called Loop-Directed Domain Insertion (LooDo), implemented within the Rosetta software suite, for the purpose of designing nested protein domain combinations connected by flexible linker regions. Conformational space for the insert domain is sampled using large libraries of linker fragments for linker-to-parent domain superimposition followed by insert-to-linker superimposition. The relative positioning of the two domains (treated as rigid bodies) is sampled efficiently by a grid-based, mutual placement compatibility search. The conformations of the loop residues, and the identities of loop as well as interface residues, are simultaneously optimized using a generalized kinematic loop closure algorithm and Rosetta EnzymeDesign, respectively, to minimize interface energy. The algorithm was found to consistently sample near-native conformations and interface sequences for a benchmark set of structurally similar but functionally divergent domain-inserted enzymes from the α/β hydrolase superfamily, and discriminates well between native and nonnative conformations and sequences, although loop conformations tended to deviate from the native conformations. Furthermore, in cross-domain placement tests, native insert-parent domain combinations were ranked as the best-scoring structures compared to nonnative domain combinations. This algorithm should be broadly applicable to the design of multi-domain protein complexes with any combination of inserted or tandem domain connections.

Biomolecular engineering for nanobio/bionanotechnology

Biomolecular engineering can be used to purposefully manipulate biomolecules, such as peptides, proteins, nucleic acids and lipids, within the framework of the relations among their structures, functions and properties, as well as their applicability to such areas as developing novel biomaterials, biosensing, bioimaging, and clinical diagnostics and therapeutics. Nanotechnology can also be used to design and tune the sizes, shapes, properties and functionality of nanomaterials. As such, there are considerable overlaps between nanotechnology and biomolecular engineering, in that both are concerned with the structure and behavior of materials on the nanometer scale or smaller. Therefore, in combination with nanotechnology, biomolecular engineering is expected to open up new fields of nanobio/bionanotechnology and to contribute to the development of novel nanobiomaterials, nanobiodevices and nanobiosystems. This review highlights recent studies using engineered biological molecules (e.g., oligonucleotides, peptides, proteins, enzymes, polysaccharides, lipids, biological cofactors and ligands) combined with functional nanomaterials in nanobio/bionanotechnology applications, including therapeutics, diagnostics, biosensing, bioanalysis and biocatalysts. Furthermore, this review focuses on five areas of recent advances in biomolecular engineering: (a) nucleic acid engineering, (b) gene engineering, (c) protein engineering, (d) chemical and enzymatic conjugation technologies, and (e) linker engineering. Precisely engineered nanobiomaterials, nanobiodevices and nanobiosystems are anticipated to emerge as next-generation platforms for bioelectronics, biosensors, biocatalysts, molecular imaging modalities, biological actuators, and biomedical applications.

Promoting Tag Removal of a MBP-Fused Integral Membrane Protein by TEV Protease

Tag removal is a prerequisite issue for structural and functional analysis of affinity-purified membrane proteins. The present study took a MBP-fused membrane protein, MrpF, as a model to investigate the tag removal by TEV protease. Influences of the linking sequence between TEV cleavage site and MrpF on protein expression and predicted secondary structure were investigated. The steric accessibility of TEV protease to cleavage site of MBP-fused MrpF was explored. It was found that reducing the size of hydrophilic group of detergents and/or extending the linking sequence between cleavage site and target protein can significantly improve the accessibility of the cleavage site and promote tag removal by TEV protease.

Transposon for protein engineering

Protein insertional fusion and circular permutation are 2 promising protein engineering techniques for creating integrated functionalities and sequence diversity of a protein, respectively. Finding insertion locations for protein insertional fusion and new termini for circular permutation through a rational approach is not always straightforward, especially, for proteins without detailed structural knowledge. On the contrary, a combinatorial approach facilitates a comprehensive search to evaluate all potential insertion sites and new termini locations. Conventional methods used to create random insertional fusion libraries generate sub-optimal inter-domain linker length and composition between fused proteins. There are also methods available for construction of random circular permutation libraries. However, these methods too, impose many drawbacks, such as significant sequence modification at the new termini of circular permutants and additionally, require re-design of transposons for tailored expression of circular permutants. Furthermore, these conventional methods employ relatively inefficient blunt-end ligation during library construction. In this commentary, we present a concise overview and key findings of engineered Mu transposons, which have recently been developed in our group as a facile and efficient tool to alleviate limitations realized from conventional methods and to construct high quality libraries for random insertional fusion and random circular permutation.

Structural and dynamic changes associated with beneficial engineered single-amino-acid deletion mutations in enhanced green fluorescent protein

Single-amino-acid deletions are a common part of the natural evolutionary landscape but are rarely sampled during protein engineering owing to limited and prejudiced molecular understanding of mutations that shorten the protein backbone. Single-amino-acid deletion variants of enhanced green fluorescent protein (EGFP) have been identified by directed evolution with the beneficial effect of imparting increased cellular fluorescence. Biophysical characterization revealed that increased functional protein production and not changes to the fluorescence parameters was the mechanism that was likely to be responsible. The structure EGFP(D190Δ) containing a deletion within a loop revealed propagated changes only after the deleted residue. The structure of EGFP(A227Δ) revealed that a `flipping' mechanism was used to adjust for residue deletion at the end of a β-strand, with amino acids C-terminal to the deletion site repositioning to take the place of the deleted amino acid. In both variants new networks of short-range and long-range interactions are generated while maintaining the integrity of the hydrophobic core. Both deletion variants also displayed significant local and long-range changes in dynamics, as evident by changes in B factors compared with EGFP. Rather than being detrimental, deletion mutations can introduce beneficial structural effects through altering core protein properties, folding and dynamics, as well as function.

Random single amino acid deletion sampling unveils structural tolerance and the benefits of helical registry shift on GFP folding and structure

Altering a protein’s backbone through amino acid deletion is a common evolutionary mutational mechanism, but is generally ignored during protein engineering primarily because its effect on the folding-structure-function relationship is difficult to predict. Using directed evolution, enhanced green fluorescent protein (EGFP) was observed to tolerate residue deletion across the breadth of the protein, particularly within short and long loops, helical elements, and at the termini of strands. A variant with G4 removed from a helix (EGFP^G4Δ) conferred significantly higher cellular fluorescence. Folding analysis revealed that EGFP^G4Δ retained more structure upon unfolding and refolded with almost 100% efficiency but at the expense of thermodynamic stability. The EGFP^G4Δ structure revealed that G4 deletion caused a beneficial helical registry shift resulting in a new polar interaction network, which potentially stabilizes a cis proline peptide bond and links secondary structure elements. Thus, deletion mutations and registry shifts can enhance proteins through structural rearrangements not possible by substitution mutations alone.

•

Using directed evolution, the impact of amino acid deletion on EGFP is explored

•

Loops, helices, and strand termini are especially tolerant to amino acid deletion

•

A deletion mutant that enhances cellular production and fluorescence is identified

•

Structure reveals that a helical registry shift creates a new polar network

Insertion of endocellulase catalytic domains into thermostable consensus ankyrin scaffolds: effects on stability and cellulolytic activity

Degradation of cellulose for biofuels production holds promise in solving important environmental and economic problems. However, the low activities (and thus high enzyme-to-substrate ratios needed) of hydrolytic cellulase enzymes, which convert cellulose into simple sugars, remain a major barrier. As a potential strategy to stabilize cellulases and enhance their activities, we have embedded cellulases of extremophiles into hyperstable α-helical consensus ankyrin domain scaffolds. We found the catalytic domains CelA (CA, GH8; Clostridium thermocellum) and Cel12A (C12A, GH12; Thermotoga maritima) to be stable in the context of the ankyrin scaffold and to be active against both soluble and insoluble substrates. The ankyrin repeats in each fusion are folded, although it appears that for the C12A catalytic domain (CD; where the N and C termini are distant in the crystal structure), the two flanking ankyrin domains are independent, whereas for CA (where termini are close), the flanking ankyrin domains stabilize each other. Although the activity of CA is unchanged in the context of the ankyrin scaffold, the activity of C12A is increased between 2- and 6-fold (for regenerated amorphous cellulose and carboxymethyl cellulose substrates) at high temperatures. For C12A, activity increases with the number of flanking ankyrin repeats. These results showed ankyrin arrays to be a promising scaffold for constructing designer cellulosomes, preserving or enhancing enzymatic activity and retaining thermostability. This modular architecture will make it possible to arrange multiple cellulase domains at a precise spacing within a single polypeptide, allowing us to search for spacings that may optimize reactivity toward the repetitive cellulose lattice.

Topological mapping methods for α-helical bacterial membrane proteins--an update and a guide

Integral membrane proteins with α-helical transmembrane segments (TMS) are known to play important and diverse roles in prokaryotic cell physiology. The net hydrophobicity of TMS directly corresponds to the observed difficulties in expressing and purifying these proteins, let alone producing sufficient yields for structural studies using two-/three-dimensional (2D/3D) crystallographic or nuclear magnetic resonance methods. To gain insight into the function of these integral membrane proteins, topological mapping has become an important tool to identify exposed and membrane-embedded protein domains. This approach has led to the discovery of protein tracts of functional importance and to the proposition of novel mechanistic hypotheses. In this review, we synthesize the various methods available for topological mapping of α-helical integral membrane proteins to provide investigators with a comprehensive reference for choosing techniques suited to their particular topological queries and available resources.

Structural basis for efficient chromophore communication and energy transfer in a constructed didomain protein scaffold

The construction of useful functional biomolecular components not currently part of the natural repertoire is central to synthetic biology. A new light-capturing ultra-high-efficiency energy transfer protein scaffold has been constructed by coupling the chromophore centers of two normally unrelated proteins: the autofluorescent protein enhanced green fluorescent protein (EGFP) and the heme-binding electron transfer protein cytochrome b(562) (cyt b(562)). Using a combinatorial domain insertion strategy, a variant was isolated in which resonance energy transfer from the donor EGFP to the acceptor cyt b(562) was close to 100% as evident by virtually full fluorescence quenching on heme binding. The fluorescence signal of the variant was also sensitive to the reactive oxygen species H(2)O(2), with high signal gain observed due to the release of heme. The structure of oxidized holoprotein, determined to 2.75 Å resolution, revealed that the two domains were arranged side-by-side in a V-shape conformation, generating an interchromophore distance of ~17 Å (14 Å edge-to-edge). Critical to domain arrangement is the formation of a molecular pivot point between the two domains as a result of different linker sequence lengths at each domain junction and formation of a predominantly polar interdomain interaction surface. The retrospective structural analysis has provided an explanation for the basis of the observed highly efficient energy transfer through chromophore arrangement in the directly evolved protein scaffold and provides an insight into the molecular principles by which to design new proteins with coupled functions.

Making the most of fusion tags technology in structural characterization of membrane proteins

Membrane proteins can be investigated at various structural levels, including the topological structure, the high-resolution three-dimensional structure, and the organization and assembly of membrane protein complexes. Gene fusion technology makes it possible to insert a polynucleotide encoding a protein or polypeptide tag into the gene encoding a membrane protein of interest. Resultant recombinant proteins may possess the functions of the original membrane proteins, together with the biochemical properties of the imported fusion tag, greatly enhancing functional and structural studies of membrane proteins. In this article, the latest literature is reviewed in relation to types, applications, strategies, and approaches to fusion tag technology for structural investigations of membrane proteins.

Linking the functions of unrelated proteins using a novel directed evolution domain insertion method

We have successfully developed a new directed evolution method for generating integral protein fusions comprising of one domain inserted within another. Creating two connections between the insert and accepting parent domain can result in the inter-dependence of the separate protein activities, thus providing a general strategy for constructing molecular switches. Using an engineered transposon termed MuDel, contiguous trinucleotide sequences were removed at random positions from the bla gene encoding TEM-1 β-lactamase. The deleted trinucleotide sequence was then replaced by a DNA cassette encoding cytochrome b₅₆₂ with differing linking sequences at each terminus and sampling all three reading frames. The result was a variety of chimeric genes encoding novel integral fusion proteins that retained TEM-1 activity. While most of the tolerated insertions were observed in loops, several also occurred close to the termini of α-helices and β-strands. Several variants conferred a switching phenotype on Escherichia coli, with bacterial tolerance to ampicillin being dependent on the presence of haem in the growth medium. The magnitude of the switching phenotype ranged from 4- to 128-fold depending on the insertion position within TEM-1 and the linker sequences that join the two domains.

Functional fusion proteins by random transposon-based GFP insertion

Fusions with fluorescent proteins are usually created by fusing the ends of two coding sequences. Appending the coding region of a fluorescent protein to the N- or C-terminus of another protein is typically the easiest way of creating a functional, fluorescent fusion protein. Another strategy involves placing the fluorescent protein in the middle of another protein. Such sandwich fusions are feasible, and there are many reasons for creating these fusion proteins. For example, sandwich fusions can be used to place two fluorescent proteins close to one another for optimization of a biosensor based on fluorescence resonance energy transfer, or they can be used to place the fluorescent protein in a region that moves during conformational changes of the host protein. Designing a sandwich fusion that produces a functional, fluorescent fusion protein is often challenging. This protocol describes an alternative approach. A simple, in vitro, transposon reaction is used to randomly insert the sequence encoding a fluorescent fusion protein into a target protein. This random labeling strategy makes it possible to create a small library of sandwich fusion proteins that can then be screened for activity. The approach makes it possible to test many possible solutions to the complex problem of building new biosensors.

Construction of the bifunctional enzyme cellulase-beta-glucosidase from the hyperthermophilic bacterium Thermotoga maritima

An artificial bifunctional enzyme, cellulase-beta-glucosidase, was prepared by gene fusion from the hyperthermophilic bacterium Thermotoga maritima MSB8. The fusion protein exhibited both cellulase (Cel5C) and beta-glucosidase (BglB) activity when the bglB gene was fused to downstream of cel5C, but not when cel5C was fused to downstream of bglB. The specific activity of the bifunctional enzyme was 70% lower than that of cellulase or beta-glucosidase. The fusion enzyme was purified, and the MW was estimated as 114 kDa. The fusion enzyme displayed optimum cellulase activity at pH 8.0 and 70 degrees C over 30 min, and optimal beta-glucosidase activity at pH 7.0 and 80 degrees C over 30 min.

Assembling a novel bifunctional cellulase–xylanase from Thermotoga maritima by end-to-end fusion

An artificial, bifunctional, thermostable cellulase-xylanase enzyme from Thermotoga maritima by gene fusion. The fusion protein exhibited both cellulase and xylanase activity when xynA was fused downstream of cel5C but no activities were shown when xynA was fused upstream of cel5C. The enzyme was optimally active at pH 5.0 and 80 degrees C over 30 min. E. coli expressed the fusion enzyme, with an apparent molecular mass of approximately 152 kDa by carboxymethyl cellulose- and xylan-SDS-PAGE.

Insertional protein engineering for analytical molecular sensing

The quantitative detection of low analyte concentrations in complex samples is becoming an urgent need in biomedical, food and environmental fields. Biosensors, being hybrid devices composed by a biological receptor and a signal transducer, represent valuable alternatives to non biological analytical instruments because of the high specificity of the biomolecular recognition. The vast range of existing protein ligands enable those macromolecules to be used as efficient receptors to cover a diversity of applications. In addition, appropriate protein engineering approaches enable further improvement of the receptor functioning such as enhancing affinity or specificity in the ligand binding. Recently, several protein-only sensors are being developed, in which either both the receptor and signal transducer are parts of the same protein, or that use the whole cell where the protein is produced as transducer. In both cases, as no further chemical coupling is required, the production process is very convenient. However, protein platforms, being rather rigid, restrict the proper signal transduction that necessarily occurs through ligand-induced conformational changes. In this context, insertional protein engineering offers the possibility to develop new devices, efficiently responding to ligand interaction by dramatic conformational changes, in which the specificity and magnitude of the sensing response can be adjusted up to a convenient level for specific analyte species. In this report we will discuss the major engineering approaches taken for the designing of such instruments as well as the relevant examples of resulting protein-only biosensors.

Directed evolution of protein switches and their application to the creation of ligand-binding proteins

We describe an iterative approach for creating protein switches involving the in vitro recombination of two nonhomologous genes. We demonstrate this approach by recombining the genes coding for TEM1 beta-lactamase (BLA) and the Escherichia coli maltose binding protein (MBP) to create a family of MBP-BLA hybrids in which maltose is a positive or negative effector of beta-lactam hydrolysis. Some of these MBP-BLA switches were effectively "on-off" in nature, with maltose altering catalytic activity by as much as 600-fold. The ability of these switches to confer an effector-dependent growth/no growth phenotype to E. coli cells was exploited to rapidly identify, from a library of 4 x 10(6) variants, MBP-BLA switch variants that respond to sucrose as the effector. The transplantation of these mutations into wild-type MBP converted MBP into a "sucrose-binding protein," illustrating the switches potential as a tool to rapidly identify ligand-binding proteins.

Engineering allosteric protein switches by domain insertion

Domain insertion is proving to be an effective way to construct hybrid proteins exhibiting switch-like behavior. In this strategy, two existing domains, the first exhibiting a signal recognition function and the second containing the function to be modulated, are fused such that the recognition of the signal by the first domain is transmitted to the second domain, thereby modulating its activity. Recent directed evolution experiments indicate that the structural space comprised of the recombination of unrelated protein domains may be rich in switching behavior, particularly when the circular permutation of domains is also employed. This bodes well for potential basic science, sensing and therapeutic applications of molecular switches.

A Molecular Switch Created by In Vitro Recombination of Nonhomologous Genes

We have created a molecular switch by the in vitro recombination of nonhomologous genes and subjecting the recombined genes to evolutionary pressure. The gene encoding TEM1 beta-lactamase was circularly permuted in a random fashion and subsequently randomly inserted into the gene encoding Escherichia coli maltose binding protein. From this library, a switch (RG13) was identified in which its beta-lactam hydrolysis activity was compromised in the absence of maltose but increased 25-fold in the presence of maltose. Upon removal of maltose, RG13's catalytic activity returned to its premaltose level, illustrating that the switching is reversible. The modularity of RG13 was demonstrated by increasing maltose affinity while preserving switching activity. RG13 gave rise to a novel cellular phenotype, illustrating the potential of molecular switches to rewire the cellular circuitry.

Insertional-fusion of basic fibroblast growth factor endowed ribonuclease 1 with enhanced cytotoxicity by steric blockade of inhibitor interaction

Basic fibroblast growth factor (bFGF) was inserted in the middle of human ribonuclease 1 (RNase1) sequence at an RNase inhibitor (RI)-binding site (Gly89) by a new gene fusion technique, insertional-fusion. The resultant insertional-fusion protein (CL-RFN89) was active both as bFGF and as RNase. Furthermore, it acquired an additional ability of evading RI through steric blockade of RI-binding caused by fused bFGF domain. As a result, CL-RFN89 showed stronger growth inhibition on B16/BL6 melanoma cells than an RI-sensitive tandem fusion protein. Thus, the insertional-fusion technique increases accessible positions for gene fusion on RNase, resulting in construction of a potent cytotoxic RNase.

Location of divergent region 2 on the three-dimensional structure of cardiac muscle ryanodine receptor/calcium release channel

Ryanodine receptors (RyRs) are a family of calcium release channels found on intracellular calcium-handing organelles. Molecular cloning studies have identified three different RyR isoforms, which are 66-70% identical in amino acid sequence. In mammals, the three isoforms are encoded by three separate genes located on different chromosomes. The major variations among the isoforms occur in three regions, known as divergent regions 1, 2, and 3 (DR1, DR2, and DR3). In the present study, a modified RyR2 (cardiac isoform) cDNA was constructed, into which was inserted a green fluorescent protein (GFP)-encoding cDNA within DR2, specifically after amino acid residue Thr1366 (RyR2(T1366-GFP)). HEK293 cells expressing RyR2(T1366-GFP) cDNAs showed caffeine-sensitive and ryanodine-sensitive calcium release, demonstrating that RyR2(T1366-GFP) forms functional calcium release channels. Cells expressing RyR2(T1366-GFP) were identified readily by the characteristic fluorescence of GFP, indicating that the overall structure of the inserted GFP was retained. Cryo-electron microscopy (cryo-EM) of purified RyR2(T1366-GFP) showed structurally intact receptors, and a three-dimensional reconstruction was obtained by single-particle image processing. The location of the inserted GFP was obtained by comparing this three-dimensional reconstruction to one obtained for wild-type RyR2. The inserted GFP and, consequently Thr1366 within DR2, was mapped on the three-dimensional structure of RyR2 to domain 6, one of the characteristic cytoplasmic domains that form part of the multi-domain "clamp" regions of RyR2. The three-dimensional location of DR2 suggests that it plays roles in the RyR conformational changes that occur during channel gating, and possibly in RyR's interaction with the dihydropyridine receptor in excitation-contraction coupling. This study further demonstrates the feasibility and reliability of the GFP insertion/cryo-EM approach for correlating RyR's amino acid sequence with its three-dimensional structure, thereby enhancing our understanding of the structural basis of RyR function.

Creation of an Allosteric Enzyme by Domain Insertion

Two allosteric enzymes have been created by the covalent linkage of non-interacting, monomeric proteins with the prerequisite effector-binding and catalytic functionalities, respectively. This was achieved through a combinatorial process called random domain insertion. The fragment of the TEM-1 beta-lactamase gene coding for the mature protein lacking its signal sequence was randomly inserted into the Escherichia coli maltose-binding protein (MBP) gene to create a domain insertion library. This library's diversity derived both from the site of insertion and from a distribution of tandem duplications or deletions of a portion of the MBP gene at the insertion site. From a library of approximately 2 x 10(4) in-frame fusions, approximately 800 library members conferred a phenotype to E.coli cells that was consistent with the presence of bifunctional fusions that could hydrolyze ampicillin and transport maltose in E.coli. Partial screening of this bifunctional sublibrary resulted in the identification of two enzymes in which the presence of maltose modulated the rate of nitrocefin hydrolysis. For one of these enzymes, the presence of maltose increased k(cat) by 70% and k(cat)/K(m) by 80% and resulted in kinetic parameters that were almost identical to TEM-1 beta-lactamase. Such an increase in activity was only observed with maltooligosaccharides whose binding to MBP is known to induce a conformational change. Modulation of the rate of nitrocefin hydrolysis could be detected at maltose concentrations less than 1 microM. Intrinsic protein fluorescence studies were consistent with a conformational change being responsible for the modulation of activity.

Feasibility, sensitivity, and reliability of laser-induced fluorescence imaging of green fluorescent protein-expressing tumors in vivo

Whole-body imaging of green fluorescent protein (GFP) can be used to test the efficiency of gene carriers for in vivo transduction. The aim of the current study was to determine the sensitivity and the accuracy of a GFP imaging procedure by in vivo investigation of GFP-expressing tumor cells. An improved method of whole-body GFP imaging made use of a laser excitation source and band-pass filters matched specifically to GFP and constitutive tissue fluorescence emission bands. Processing of the primary GFP fluorescence images acquired by the CCD camera subtracted background tissue autofluorescence. Our approach achieved 100% sensitivity and specificity for in vivo detection of 10%-transfected BxPc3 pancreatic tumor after subcutaneous grafting or orthotopical implantation in the pancreas of nude mice. It also detected less transfected tumors (i.e., 1 to 5%) but with a loss in sensitivity (50% of cases). The system was employed over a 5-week period to monitor the persistence of GFP expression in 10%-transfected BxPc3 tumors orthotopically implanted in the pancreas of two nude mice, allowing the direct visualization of tumor progression and spread. In facilitating the temporal-spatial follow-up of GFP expression in vivo, the optimized laser-induced fluorescence imaging device can support preclinical investigations of vectors for therapeutic gene transduction through regular, harmless, real-time monitoring of theirin vivo transductional efficacy and persistence.

Engineering of Escherichia coli beta-galactosidase for solvent display of a functional scFv antibody fragment

Protein engineering allows the generation of hybrid polypeptides with functional domains from different origins and therefore exhibiting new biological properties. We have explored several permissive sites in Escherichia coli beta-galactosidase to generate functional hybrid enzymes displaying a mouse scFv antibody fragment. When this segment was placed at the amino-terminus of the enzyme, the whole fusion protein was stable, maintained its specific activity and interacted specifically with the target antigen, a main antigenic determinant of foot-and-mouth disease virus. In addition, the antigen-targeted enzyme was enzymatically active when bound to the antigen and therefore useful as a reagent in single-step immunoassays. These results prove the flexibility of E. coli beta-galactosidase as a carrier for large-sized functional domains with binding properties and prompt the further exploration of the biotechnological applicability of the scFv enzyme targeting principle for diagnosis or other biomedical applications involving antigen tagging.

Three-dimensional reconstruction of the recombinant type 2 ryanodine receptor and localization of its divergent region 1

Isoform 2 of the ryanodine receptor (RyR2) is the major calcium release channel in cardiac muscle. In the present study, two kinds of RyR2 cDNA were constructed, one encoding the wild type mouse RyR2 (RyR2(wt)) and the other encoding modified RyR2, into which was inserted a cDNA encoding green fluorescent protein (GFP). GFP was inserted into the divergent region 1 (DR1) of RyR2, after the Asp-4365 (RyR2(D4365-GFP)). HEK293 cells expressing both RyR2(wt) and RyR2(D4365-GFP) cDNAs showed caffeine- and ryanodine-sensitive calcium release, demonstrating that both wild type and modified RyR2s form functional calcium release channels. Cells expressing the fusion protein, RyR2(D4365-GFP), were readily identified by their fluorescence due to the presence of GFP, indicating that the inserted GFP folded properly. Both expressed RyR2s were purified from cell lysates in a single step by affinity chromatography using a GST-FKBP12.6 as the affinity ligand. Cryoelectron microscopy of purified RyR2s showed structurally intact receptors, and three-dimensional reconstructions were obtained by single particle image processing. The three-dimensional reconstruction of RyR2(wt) appeared very similar to that of the native RyR2 purified from dog heart. The location of the inserted GFP, and consequently of DR1, was mapped on the three-dimensional structure of RyR2 to one of the subunit's characteristic domains, domain 3, also known as the "handle" domain. This study describes the first internal fusion of a protein into a ryanodine receptor, and it demonstrates the potential of this technology for localizing functional and structural domains on the three-dimensional structure of RyR.

Understanding the art of producing protein and nonprotein molecules in Escherichia coli

The high-level production of functional proteins in E. coli is a very extense field of research in biotechnology. A number of important aspects to be considered in the initial design of an expression system and their interplay, were clear years ago. However, in recent times, strategies that go beyond transcription, translation, stability, vector, and strain choice, have been developed; so now expression of active peptides can be viewed as a more integrated process. Coexpression of protein subunits, foldases and chaperones, protein folding, location and purification schemes, metabolic engineering of the cell's central metabolism, and in vitro refolding strategies, are some of the novelties that are now available to aid in the success of an efficient expression system for active heterologous proteins. This review presents a compilation of the basic issues that influence the success in the production of protein and nonprotein products in Escherichia coli, as well as some general strategies designed to facilitate downstream process operations and improve biosynthesis yields.

Engineering regulable Escherichia coli beta-galactosidases as biosensors for anti-HIV antibody detection in human sera

The activity of engineered, peptide-displaying enzymes is modulated by binding to specific anti-peptide antibodies. This new concept of a quantitative antibody detection system allows test kits to be set up for fast diagnosis of infectious diseases. To develop a quick and homogeneous assay for the detection of human immunodeficiency virus (HIV) infection, we have explored two acceptor sites of the bacterial Escherichia coli beta-galactosidase for the accommodation of HIV antigenic peptides. Two overlapping epitopes (namely P1 and P2) from the gp41 envelope glycoprotein, contained in different sized peptides, were inserted in the vicinity of the enzyme active site to generate a set of hybrid, enzymatically active beta-galactosidases. Regulable enzymes of different responsiveness to monoclonal antibody binding were generated with both acceptor sites tested. These biosensors were also sensitive to immune sera from HIV-infected patients. Modeling data provide insight into the structural modifications in the vicinity of the active site induced by peptide insertion that strongly affect the responsiveness of the engineered proteins through different parameters of their catalytic properties.