New manganese catalysts for alcohol oxidation

Enhancing Chemo- and Stereoselectivity in C-H Bond Oxygenation with H2O2 by Nonheme High-Spin Iron Catalysts: The Role of Lewis Acid and Multimetal Centers

Spin states of iron often direct the selectivity in oxidation catalysis by iron complexes using hydrogen peroxide (H₂O₂) on an oxidant. While low-spin iron(III) hydroperoxides display stereoselective C-H bond hydroxylation, the reactions are nonstereoselective with high-spin iron(II) catalysts. The catalytic studies with a series of high-spin iron(II) complexes of N4 ligands with H₂O₂ and Sc³⁺ reported here reveal that the Lewis acid promotes catalytic C-H bond hydroxylation with high chemo- and stereoselectivity. This reactivity pattern is observed with iron(II) complexes containing two cis-labile sites. The enhanced selectivity for C-H bond hydroxylation catalyzed by the high-spin iron(II) complexes in the presence of Sc³⁺ parallels that of the low-spin iron catalysts. Furthermore, the introduction of multimetal centers enhances the activity and selectivity of the iron catalyst. The study provides insights into the development of peroxide-dependent bioinspired catalysts for the selective oxygenation of C-H bonds without the restriction of using iron complexes of strong-field ligands.

Oxidation of Organic Compounds with Peroxides Catalyzed by Polynuclear Metal Compounds

The review describes articles that provide data on the synthesis and study of the properties of catalysts for the oxidation of alkanes, olefins, and alcohols. These catalysts are polynuclear complexes of iron, copper, osmium, nickel, manganese, cobalt, vanadium. Such complexes for example are: [Fe2(HPTB)(m-OH)(NO3)2](NO3)2·CH3OH·2H2O, where HPTB-¼N,N,N0,N0-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane; complex [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2, where dppm-1,1-bis(diphenylphosphino)methane; (2,3-η-1,4-diphenylbut-2-en-1,4-dione)undecacarbonyl triangulotriosmium; phenylsilsesquioxane [(PhSiO1.5)10(CoO)5(NaOH)]; bi- and tri-nuclear oxidovanadium(V) complexes [{VO(OEt)(EtOH)}2(L2)] and [{VO(OMe)(H2O)}3(L3)]·2H2O (L2 = bis(2-hydroxybenzylidene)terephthalohydrazide and L3 = tris(2-hydroxybenzylidene)benzene-1,3,5-tricarbohydrazide); [Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane). For comparison, articles are introduced describing catalysts for the oxidation of alkanes and alcohols with peroxides, which are simple metal salts or mononuclear metal complexes. In many cases, polynuclear complexes exhibit higher activity compared to mononuclear complexes and exhibit increased regioselectivity, for example, in the oxidation of linear alkanes. The review contains a description of some of the mechanisms of catalytic reactions. Additionally presented are articles comparing the rates of oxidation of solvents and substrates under oxidizing conditions for various catalyst structures, which allows researchers to conclude about the nature of the oxidizing species. This review is focused on recent works, as well as review articles and own original studies of the authors.

Palladium aminopyridine complexes catalyzed selective benzylic C–H oxidations with peracetic acid

Palladium complexes with tripodal ligands of the tpa family efficiently catalyze benzylic C–H oxidation of various substrates with peracetic acid, affording the corresponding ketones in high yields (up to 100%), at <1 mol% catalyst loadings.

Manganese complex-catalyzed oxidation and oxidative kinetic resolution of secondary alcohols by hydrogen peroxide

The highly efficient catalytic oxidation and oxidative kinetic resolution (OKR) of secondary alcohols has been achieved using a synthetic manganese catalyst with low loading and hydrogen peroxide as an environmentally benign oxidant in the presence of a small amount of sulfuric acid as an additive. The product yields were high (up to 93%) for alcohol oxidation and the enantioselectivity was excellent (>90% ee) for the OKR of secondary alcohols. Mechanistic studies revealed that alcohol oxidation occurs via hydrogen atom (H-atom) abstraction from an α-CH bond of the alcohol substrate and a two-electron process by an electrophilic Mn-oxo species. Density functional theory calculations revealed the difference in reaction energy barriers for H-atom abstraction from the α-CH bonds of R- and S-enantiomers by a chiral high-valent manganese-oxo complex, supporting the experimental result from the OKR of secondary alcohols.

Mechanochemical catalytic oxidations in the solid state with in situ-generated modified IBX from 3,5-di-tert-butyl-2-iodobenzoic acid (DTB-IA)/Oxone

Highly reactive IBX – generated from o-iodobenzoic acid and Oxone – permits a variety of catalytic oxidations in the solid state.

Aerobic alcohol oxidation and oxygen atom transfer reactions catalyzed by a nonheme iron(ii)-α-keto acid complex

An iron(ii)-benzoylformate complex of a monoanionic facial tridentate ligand catalyzes the aerobic oxidation of sulfides to sulfoxides, alkenes to epoxides, and alcohols to the corresponding carbonyl compounds.

α-Ketoglutarate-dependent enzymes catalyze many important biological oxidation/oxygenation reactions. Iron(iv)–oxo intermediates have been established as key oxidants in these oxidation reactions. While most reported model iron(ii)–α-keto acid complexes exhibit stoichiometric reactivity, selective oxidation of substrates with dioxygen catalyzed by biomimetic iron(ii)–α-keto acid complexes remains unexplored. In this direction, we have investigated the ability of an iron(ii) complex [(Tp^Ph,Me)Fe^II(BF)] (1) (Tp^Ph,Me = hydrotris(3-phenyl-5-methylpyrazolyl)borate and BF = monoanionic benzoylformate) to catalyze the aerobic oxidation of organic substrates. An iron–oxo oxidant, intercepted in the reaction of 1 with O₂, selectively oxidizes sulfides to sulfoxides, alkenes to epoxides, and alcohols to the corresponding carbonyl compounds. The oxidant from 1 is able to hydroxylate the benzylic carbon of phenylacetic acid to afford mandelic acid with the incorporation of one oxygen atom from O₂ into the product. The iron(ii)–benzoylformate complex oxidatively converts phenoxyacetic acids to the corresponding phenols, thereby mimicking the function of iron(ii)–α-ketoglutarate-dependent 2,4-dichlorophenoxyacetate dioxygenase (TfdA). Furthermore, complex 1 exhibits catalytic aerobic oxidation of alcohols and oxygen atom transfer reactions with multiple turnovers.

Potent Heterogeneous Catalyst for Low Temperature Selective Oxidation of Cyclohexanol by Molecular Oxygen

Platinum supported on zirconium dioxide catalyst was prepared by standard method and characterized by SEM, EDX, XRD, BET surface area and pore size analyzer, and FT-IR. The catalyst was screened for its catalytic activity in a model reaction, selective oxidation of cyclohexanol. The only one major product, cyclohexanone 31%, with 99.8% selectivity was obtained. Experimental data was analyzed through different kinetic models and we deduced that the reaction follows Langmuir-Hinshelwood mechanism. The apparent activation energy for the model reaction was calculated as 45 kJ/mole. The catalyst was regenerated several times with same efficiency.

Mixed-valence Manganese Oxide Catalysed Oxidation of Benzyl Alcohol and Cyclohexanol in the Liquid Phase

Two types of mixed-valence manganese oxides were synthesised by a mechano-chemical process in the solid phase by chemical reaction of manganese(II) chloride and potassium permanganate at room temperature. The prepared catalysts were characterised by surface area and pore size, particle size, XRD analyses, SEM analyses and oxygen content measurements. These oxides were used as catalysts for oxidation of benzyl alcohol and cyclohexanol in the presence of solvent and also in solvent-free conditions using molecular oxygen as oxidant. The oxidation reactions were heterogeneous in nature where the catalysts were separated from the reaction mixture by simple filtration. Reaction took place in two steps according to the Langmuir–Hinshelwood mechanism. Benzyl alcohol/cyclohexanol and oxygen adsorb at the surface of the catalyst in the first step followed by reaction between adsorbed benzyl alcohol/cyclohexanol in second step. 69.8 kJ mol−1 and 140.8 kJ mol−1 were calculated as the activation energy for benzyl alcohol and cyclohexanol in n-octane as the solvent respectively, with values of 65.1 and 76 kJ mol−1 for benzyl alcohol and cyclohexanol in solvent-free conditions respectively.

Highly efficient oxidation of alcohols catalyzed by a porphyrin-inspired manganese complex

A novel strategy for catalytic oxidation of a variety of benzylic, allylic, propargylic, and aliphatic alcohols to the corresponding aldehydes or ketones has been successfully developed.

Synthesis, characterization, reactivity and catalytic activity of a novel chiral manganese Schiff base complex

A new type of manganese-Schiff base complex was synthesized and used as a catalyst for the oxidation of alcohols to the carbonyl compounds.

Manganese-catalyzed selective oxidation of aliphatic C-H groups and secondary alcohols to ketones with hydrogen peroxide

An efficient and simple method for selective oxidation of secondary alcohols and oxidation of alkanes to ketones is reported. An in situ prepared catalyst is employed based on manganese(II) salts, pyridine-2-carboxylic acid, and butanedione, which provides good-to-excellent conversions and yields with high turnover numbers (up to 10 000) with H2 O2 as oxidant at ambient temperatures. In substrates bearing multiple alcohol groups, secondary alcohols are converted to ketones selectively and, in general, benzyl C-H oxidation proceeds in preference to aliphatic C-H oxidation.

A highly efficient non-heme manganese complex in oxygenation reactions

A non-heme manganese(II) complex shows a high catalytic activity in the epoxidation of olefins by iodosyl benzene and in the oxidation of olefins, alcohols and alkanes by peracetic acid; a mechanism involving metal-based oxidants is proposed for the oxidation reactions.

Inhibition of plant amine oxidases by a novel series of diamine derivatives

A series of N,N'-bis(2-pyridinylmethyl)diamines was synthesized and characterized for their inhibition effects towards plant copper-containing amine oxidase (EC 1.4.3.6) and polyamine oxidase (EC 1.5.3.11), which mediate the catabolic regulation of cellular polyamines. Even though these enzymes catalyze related reactions and, among others, act upon two common substrates (spermidine and spermine), their molecular and kinetic properties are different. They also show a different spectrum of inhibitors. It is therefore of interest to look for compounds providing a dual inhibition (i.e. inhibiting both enzymes with the same inhibition potency), which would be useful in physiological studies involving modulations of polyamine catabolism. The synthesized diamine derivatives comprised from two to eight carbon atoms in the alkyl spacer chain. Kinetic measurements with pea (Pisum sativum) diamine oxidase and oat (Avena sativa) polyamine oxidase demonstrated reversible binding of the compounds at the active sites of the enzymes as they were almost exclusively competitive inhibitors with K(i) values ranging from 10(-5) to 10(-3)M. In case of oat polyamine oxidase, the K(i) values were significantly influenced by the number of methylene groups in the inhibitor molecule. The measured inhibition data are discussed with respect to enzyme structure. For that reason, the oat enzyme was analyzed by de novo peptide sequencing using mass spectrometry and shown to be homologous to polyamine oxidases from barley (isoform 1) and maize. We conclude that some of the studied N,N'-bis(2-pyridinylmethyl)diamines might have a potential to be starting structures in design of metabolic modulators targeted to both types of amine oxidases.

Applications of Transition-Metal Catalysts to Textile and Wood-Pulp Bleaching

From an economic perspective, textile and paper bleaching are amongst the most important oxidation processes. The removal of unwanted chromophores, be it stains on cloths or residual lignin in wood pulp, consumes more than 60 % of the world production of hydrogen peroxide. However, existing technologies have their limitations. At ambient temperature, hydrogen peroxide gives little stain bleaching and is used inefficiently. Hence the high product dosages and washing temperatures required limit its application to predominantly European markets, to the exclusion of the majority of the world's population. In paper manufacture, the use of chlorine-based oxidants results in the formation of chlorinated waste products, which show poor biodegradability. On the other hand, hydrogen peroxide requires higher temperatures, longer reaction times and is more expensive. Transition-metal catalysts offer an alternative. This review discusses the main classes of known bleach catalysts and their possible modes of action.

Synthesis, Structure, and Characterization of New Mononuclear Mn(II) Complexes. Electrochemical Conversion into New Oxo-Bridged Mn2(III,IV) Complexes. Role of Chloride Ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.

Oxygen binding and activation by the complexes of PY2- and TPA-appended diphenylglycoluril receptors with copper and other metals

The copper(I) complexes of diphenylglycoluril basket receptors and , appended with bis(2-ethylpyridine)amine (PY2) and tris(2-methylpyridine)amine (TPA), respectively, and their dioxygen adducts were studied with low-temperature UV-vis and X-ray absorption spectroscopy (XAS). The copper(I) complex of, [.Cu(I)2] or, forms a micro-eta2:eta2 dioxygen complex, whereas the copper(I) complex of, [.Cu(I)2] or, does not form a well defined dioxygen complex, but is oxidized to Cu(II). Dioxygen is bound irreversibly to and the formed complex is stable over time. The coordination geometries of the above complexes were determined by XAS, which revealed that pyridyl groups and amine N-donors participate in the coordination to Cu(I) ions in the complexes of both receptors. The catalytic activities of various metal complexes of and , that were designed as mimics of dinuclear copper enzymes that can activate dioxygen, were investigated. Phenolic substrates that were expected to undergo aromatic hydroxylation, showed oxidative polymerization without insertion of oxygen. The mechanism of this polymerization turns out to be a radical coupling reaction as was established by experiments with the model substrate 2,4-di-tert-butylphenol. In addition to Cu(II), the Mn(III) complex of and the Fe(II) complex of were tested as oxidation catalysts. Oxidation of catechol was observed for the Cu(II) complex of receptor but the other metal complexes did not lead to oxidation.

A water-soluble and "self-assembled" polyoxometalate as a recyclable catalyst for oxidation of alcohols in water with hydrogen peroxide

We have demonstrated that a simply prepared water-soluble polyoxometalate, Na12[WZnZn2(H2O)2(ZnW9O34)2], synthesized from readily available zinc and tungsten salts in the presence of nitric acid, is an effective catalyst for selective alcohol oxidation with hydrogen peroxide in biphasic (water-alcohol) reaction media. Experiments have shown that the "self-assembled" catalyst in its mother liquor was as active as the isolated catalyst. The aqueous catalyst solution is easily separated from the water-insoluble products and can be recycled without loss in activity or selectivity.