High affinity divalent cation exchange on actin. Association rate measurements support the simple competitive model

Ca2+ attenuates nucleation activity of leiomodin

A transient increase in Ca2+ concentration in sarcomeres is essential for their proper function. Ca2+ drives striated muscle contraction via binding to the troponin complex of the thin filament to activate its interaction with the myosin thick filament. In addition to the troponin complex, the myosin essential light chain and myosin-binding protein C were also found to be Ca2+ sensitive. However, the effects of Ca2+ on the function of the tropomodulin family proteins involved in regulating thin filament formation have not yet been studied. Leiomodin, a member of the tropomodulin family, is an actin nucleator and thin filament elongator. Using pyrene-actin polymerization assay and transmission electron microscopy, we show that the actin nucleation activity of leiomodin is attenuated by Ca2+ . Using circular dichroism and nuclear magnetic resonance spectroscopy, we demonstrate that the mostly disordered, negatively charged region of leiomodin located between its first two actin-binding sites binds Ca2+ . We propose that Ca2+ binding to leiomodin results in the attenuation of its nucleation activity. Our data provide further evidence regarding the role of Ca2+ as an ultimate regulator of the ensemble of sarcomeric proteins essential for muscle function. SUMMARY STATEMENT: Ca2+ fluctuations in striated muscle sarcomeres modulate contractile activity via binding to several distinct families of sarcomeric proteins. The effects of Ca2+ on the activity of leiomodin-an actin nucleator and thin filament length regulator-have remained unknown. In this study, we demonstrate that Ca2+ binds directly to leiomodin and attenuates its actin nucleating activity. Our data emphasizes the ultimate role of Ca2+ in the regulation of the sarcomeric protein interactions.

Mechanism of actin filament nucleation

We used computational methods to analyze the mechanism of actin filament nucleation. We assumed a pathway where monomers form dimers, trimers, and tetramers that then elongate to form filaments but also considered other pathways. We aimed to identify the rate constants for these reactions that best fit experimental measurements of polymerization time courses. The analysis showed that the formation of dimers and trimers is unfavorable because the association reactions are orders of magnitude slower than estimated in previous work rather than because of rapid dissociation of dimers and trimers. The 95% confidence intervals calculated for the four rate constants spanned no more than one order of magnitude. Slow nucleation reactions are consistent with published high-resolution structures of actin filaments and molecular dynamics simulations of filament ends. One explanation for slow dimer formation, which we support with computational analysis, is that actin monomers are in a conformational equilibrium with a dominant conformation that cannot participate in the nucleation steps.

Plasma membrane calcium ATPase activity is regulated by actin oligomers through direct interaction

As recently described by our group, plasma membrane calcium ATPase (PMCA) activity can be regulated by the actin cytoskeleton. In this study, we characterize the interaction of purified G-actin with isolated PMCA and examine the effect of G-actin during the first polymerization steps. As measured by surface plasmon resonance, G-actin directly interacts with PMCA with an apparent 1:1 stoichiometry in the presence of Ca(2+) with an apparent affinity in the micromolar range. As assessed by the photoactivatable probe 1-O-hexadecanoyl-2-O-[9-[[[2-[(125)I]iodo-4-(trifluoromethyl-3H-diazirin-3-yl)benzyl]oxy]carbonyl]nonanoyl]-sn-glycero-3-phosphocholine, the association of PMCA to actin produced a shift in the distribution of the conformers of the pump toward a calmodulin-activated conformation. G-actin stimulates Ca(2+)-ATPase activity of the enzyme when incubated under polymerizing conditions, displaying a cooperative behavior. The increase in the Ca(2+)-ATPase activity was related to an increase in the apparent affinity for Ca(2+) and an increase in the phosphoenzyme levels at steady state. Although surface plasmon resonance experiments revealed only one binding site for G-actin, results clearly indicate that more than one molecule of G-actin was needed for a regulatory effect on the pump. Polymerization studies showed that the experimental conditions are compatible with the presence of actin in the first stages of assembly. Altogether, these observations suggest that the stimulatory effect is exerted by short oligomers of actin. The functional interaction between actin oligomers and PMCA represents a novel regulatory pathway by which the cortical actin cytoskeleton participates in the regulation of cytosolic Ca(2+) homeostasis.

Development of free-energy-based models for chaperonin containing TCP-1 mediated folding of actin

A free-energy-based approach is used to describe the mechanism through which chaperonin-containing TCP-1 (CCT) folds the filament-forming cytoskeletal protein actin, which is one of its primary substrates. The experimental observations on the actin folding and unfolding pathways are collated and then re-examined from this perspective, allowing us to determine the position of the CCT intervention on the actin free-energy folding landscape. The essential role for CCT in actin folding is to provide a free-energy contribution from its ATP cycle, which drives actin to fold from a stable, trapped intermediate I3, to a less stable but now productive folding intermediate I2. We develop two hypothetical mechanisms for actin folding founded upon concepts established for the bacterial type I chaperonin GroEL and extend them to the much more complex CCT system of eukaryotes. A new model is presented in which CCT facilitates free-energy transfer through direct coupling of the nucleotide hydrolysis cycle to the phases of actin substrate maturation.

Biochemical implications of a three-dimensional model of monomeric actin bound to magnesium-chelated ATP

Actin structure is of intense interest in biology due to its importance in cell function and motility mediated by the spatial and temporal regulation of actin monomer-filament interconversions in a wide range of developmental and disease states. Despite this interest, the structure of many functionally important actin forms has eluded high-resolution analysis. Due to the propensity of actin monomers to assemble into filaments structural analysis of Mg-bound actin monomers has proven difficult, whereas high-resolution structures of actin with a diverse array of ligands that preclude polymerization have been quite successful. In this work, we provide a high-resolution structural model of the Mg-ATP-actin monomer using a combination of computational methods and experimental footprinting data that we have previously published. The key conclusion of this study is that the structure of the nucleotide binding cleft defined by subdomains 2 and 4 is essentially closed, with specific contacts between two subdomains predicted by the data.

Unfolding energetics of G-alpha-actin: a discrete intermediate can be re-folded to the native state by CCT

Nascent actin requires interactions with the highly conserved and essential eukaryotic chaperonin-containing TCP-1 (CCT) for its correct folding to the native state in vivo. Biochemical and structural analysis of the interaction between actin and CCT has been studied extensively but the underlying energetics and kinetics of the CCT-dependent actin folding process are not understood. We investigated the unfolding and folding pathways of actin, using stopped flow fluorescence and biochemical techniques. By using very low concentrations of actin, taking account of temperature and ATP concentration dependences we were able to determine accurately the activation energy of unfolding to a stable intermediate, I(3). Use of the fluorescent calcium chelator Quin-2 and consideration of the ATP concentration dependence on the unfolding rate has allowed the intrinsic kinetics to be linked to the accepted reaction scheme for actin denaturation. A free energy of -28.7(+/-0.2) kJ mol(-1) was determined for the loss of ATP from Ca-free G-actin, in good agreement with previous studies. Understanding the K(eq) value for this step then allowed the temperature dependence of the unfolding reaction of co-factor-free actin to be evaluated, yielding an activation energy for the unfolding of G-actin of 81.3(+/-3.3) kJ mol(-1). By chemical coupling of the extrinsic probe, Alexa Fluor 488 to cysteine 374 of native alpha-actin, we were able to follow the binding and folding of I(3) by CCT, observing for the first time, in vitro re-folding of EDTA-denatured G-actin. The high value of the activation energy between native actin and a non-native folding intermediate (I(3)) is characteristic of a partially folded, molten globule state expected to contain partial secondary structure.

Microvillar Ca++ signaling: a new view of an old problem

Proceeding from the recent finding that the main components of the Ca++ signal pathway are located in small membrane protrusions on the surface of differentiated cells, called microvilli, a novel concept of cellular Ca++ signaling was developed. The main features of this concept can be summarized as follows: Microvilli are formed on the cell surface of differentiating or resting cells from exocytic membrane domains, growing out from the cell surface by elongation of an internal bundle of actin filaments. The microvillar tip membranes contain all functional important proteins synthesized such as ion channels and transporters for energy-providing substrates and structural components, which are, in rapidly growing undifferentiated cells, distributed over the whole cell surface by lateral diffusion. The microvillar shaft structure, a bundle of actin filaments, forms a dense cytoskeletal matrix tightly covered by the microvillar lipid membrane and represents an effective diffusion barrier separating the microvillar tip compartment (entrance compartment) from the cytoplasm. This diffusion barrier prevents the passage of low molecular components such as Ca++ glucose and other relevant substrates from the entrance compartment into the cytoplasm. The effectiveness of the actin-based diffusion barrier is modulated by various signal pathways and effectors, most importantly, by the actin-depolymerizing/reorganizing activity of the phospholipase C (PLC)-coupled Ca++ signaling. Moreover, the microvillar bundle of actin filaments plays a dual role in Ca++ signaling. It combines the function of a diffusion barrier, preventing Ca++ influx into the resting cell, with that of a high-affinity, ATP-dependent, and IP3-sensitive Ca++ store. Activation of Ca++ signaling via PLC-coupled receptors simultaneously empties Ca++ stores and activates the influx of external Ca++. The presented concept of Ca++ signaling is compatible with all established data on Ca++ signaling. Properties of Ca++ signaling, that could not be reconciled with the basic principles of the current hypothesis, are intrinsic properties of the new concept. Quantal Ca++ release, Ca(++)-induced Ca++ release (CICR), the coupling phenomen between the filling state of the Ca++ store and the activity of the Ca++ influx pathway, as well as the various yet unexplained complex kinetics of Ca++ uptake and release can be explained on a common mechanistic basis.

Calcium storage and release properties of F-actin: evidence for the involvement of F-actin in cellular calcium signaling

Preceding studies have shown that the bulk of the ATP-dependent, inositol 1,4,5-trisphosphate (IP3)-sensitive Ca2+ store of hamster insulinoma (HIT) cells is located in microvilli on the cell surface. Similar results were obtained with isolated rat hepatocytes. Moreover, in vesicles of microvillar origin, passive fluxes of Ca2+, ATP, and IP3 occur through cation and anion channels, respectively, suggesting that Ca2+ storage is due to ATP-dependent Ca2+ binding to an intravesicular component. Here we demonstrate that F-actin may be a possible candidate for this function. ATP-actin monomers bind Ca2+ with high affinity (Kd = 2-8 nM) to their divalent cation binding sites. Polymerization of actin monomers decreases the rate constant for divalent cation exchange at this binding site by more than 3 orders of magnitude rendering bound cations nearly unavailable. F-actin-bound Ca2+ can be released by depolymerization and dissociation from Ca(2+)-ADP-actin monomers (Kd = 375 nM). We now provide additional evidence for the possible involvement of actin in Ca2+ storage. (1) Preincubation of surface-derived Ca(2+)-storing vesicles from HIT cells with the F-actin stabilizer, phalloidin, strongly inhibited ATP-dependent Ca2+ uptake, reducing the IP3-sensitive Ca2+ pool by 70%. Phalloidin, when added after the loading process, affected neither the amount of stored Ca2+ nor IP3 action on the store. (2) F-actin polymerized in the presence of Mg2+ in nominally Ca(2+)-free buffer still contained about half of the high affinity sites occupied with Ca2+ (Mg/Ca-F-actin). (3) Using the fura-2 technique, we found that in the presence of ATP, Mg/Ca-F-actin incorporated free Ca2+ at a relatively low rate. Short pulses of ultrasound (3-10 s) strongly accelerated Ca2+ uptake, decreasing free Ca2+ from 500 nM to below 100 nM. (4) In the presence of physiological levels of Mg2+ (0.5 mM), sonication liberated large amounts of Ca2+ from Mg/Ca-F-actin. (5) Ca-F-actin released bound Ca2+ at a very slow rate. Short ultrasonic pulses rapidly elevated free Ca2+ from about 50 nM up to 500 nM. (6) Small amounts of profilin, an actin-binding protein, released Ca2+ both from Ca- and Mg/Ca-F-actin and also inhibited uptake of Ca2+ into Mg/Ca-F-actin. (7) Phalloidin completely inhibited Ca-uptake into Mg/Ca-F-actin even during ultrasonic treatment. These findings suggest that Ca2+ storage may occur by addition of Ca-ATP-actin monomers to reactive ends of the polymer and emptying of this store by profilin-stimulated release of Ca-ADP-actin. Thus, receptor-operated Ca2+ signaling, initiated by phospholipase C activation, may proceed via the well-known phosphatidylinositol phosphate-regulated profilin/gelsolin pathway of actin reorganization/depolymerization. The importance of the proposed microvillar Ca2+ signaling system for living cells remains to be established.

Binding of divalent cation and nucleotide to G-actin in the presence of profilin

The effect of profilin, a G-actin binding protein, on the mechanism of exchange of the tightly bound metal ion and nucleotide on G-actin, has been investigated. 1) In low ionic strength buffer, profilin increases the rates of Ca2+ and Mg2+ dissociation from G-actin 250- and 50-fold, respectively. On the profilin-actin complex as well as on G-actin alone, nucleotide exchange is dependent on the concentration of divalent metal ion and is kinetically limited, at low concentration of metal ion, by the dissociation of the metal ion. 2) Under physiological ionic conditions, nucleotide exchange on G-actin is 1 order of magnitude faster than at low ionic strength. The rate of MgATP dissociation is increased by profilin from 0.05 s-1 to 2 s-1, the rate of MgADP dissociation is increased from 0.2 s-1 to 24 s-1. The dependences of the exchange rates on profilin concentration are consistent with a high affinity (5 x 10(6) to 10(7) M-1) of profilin for ATP-G-actin, and a 20-fold lower affinity for ADP-G-actin. Profilin binding to actin lowers the affinity of metal-nucleotide by about 1 order of magnitude. These results restrain the possible roles of profilin in actin assembly in vivo.

Actin-bound nucleotide/divalent cation interactions

At this point, it may be worthwhile to list, in summary form, the important aspects of divalent cation and nucleotide binding to actin that have been reviewed here: 1) High affinity divalent cation binding to actin is very tight, with equilibrium dissociation constant KCa approximately 1 nM and KMg approximately 5 nM at pH 7.0. 2) The binding kinetics of Ca++ are diffusion limited. Dissociation is slow, with k-Ca approximately 0.015 sec at pH 7.0 (and low ionic strength). 3) The binding kinetics of Mg++ are limited by the characteristics of the Mg++ aquo-ion and are much slower than for Ca++; k-Mg approximately 0.0012 at pH 7.0. 4) Increase in pH or ionic strength weakens divalent cation binding at the high affinity site, primarily by increasing k-Ca and k-Mg. 5) Exchange of Mg++ for Ca++ (or vice versa) at the high affinity site is by a competitive pseudo-first order process with an apparent rate constant (kapp) intermediate between k-Ca and k-Mg and dependent upon the cation concentration ratio [Ca]/[Mg] present. 6) High affinity ATP binding is modulated by the high affinity divalent cation. The cation concentration range over which this modulation occurs is about 100-fold higher for Mg++ than for Ca++, again because of the different characteristics of the Mg++ and Ca++ aquo-ions. 7) At low divalent cation concentrations, ATP dissociation from actin is limited by dissociation of the tightly-bound divalent cation. 8) At high divalent cation concentrations, ATP dissociation probably occurs via dissociation of the divalent cation-nucleotide complex and is quite slow, with dissociation rate constant approximately 0.0005 sec-1. 9) Competitive nucleotide exchange on actin may be described by a pseudo-first order model analogous to that for divalent cation exchange. The pseudo-first order rate constants depend upon the divalent cation concentration. The overall nucleotide exchange rate constant kex depends upon these constants and the solution nucleotide concentration ratio, e.g. [ATP]/[ADP]. The following circumstances develop from the characteristics of the high affinity binding of divalent cation and nucleotide to actin: 1) The standard methods for actin preparation convert in vivo Mg-actin into Ca-actin. 2) Converting Ca-actin back to Mg-actin is not easy. A very low ratio of [Ca]/[Mg] is necessary, which usually requires the use of Ca-cheltors, and a long time (5-10 min) must be allowed for complete exchange.(ABSTRACT TRUNCATED AT 400 WORDS)

Tightly-bound divalent cation of actin

Actin is known to undergo reversible monomer-polymer transitions that coincide with various cell activities such as cell shape changes, locomotion, endocytosis and exocytosis. This dynamic state of actin filament self-assembly and disassembly is thought to be regulated by the properties of the monomeric actin molecule and in vivo by the influence of actin-associated proteins. Of major importance to the properties of the monomeric actin molecule are the presence of one tightly-bound ATP and one tightly-bound divalent cation per molecule. In vivo the divalent cation is thought to be Mg2+ (Mg-actin) but in vitro standard purification procedures result in the preparation of Ca-actin. The affinity of actin for a divalent cation at the tight binding site is in the nanomolar range, much higher than earlier thought. The binding kinetics of Mg2+ and Ca2+ at the high affinity site on actin are considered in terms of a simple competitive binding mechanism. This model adequately describes the published observations regarding divalent cation exchange on actin. The effects of the tightly-bound cation, Mg2+ or Ca2+, on nucleotide binding and exchange on actin, actin ATP hydrolysis activity and nucleation and polymerization of actin are discussed. From the characteristics that are reviewed, it is apparent that the nature of the bound divalent cation has a significant effect on the properties of actin.