Isolation, Characterization, and Expression in Escherichia coli of the DNA Polymerase Gene from Thermus aquaticus

High-level expression of codon-optimized Taq DNA polymerase under the control of rhaBAD promoter

A DNA polymerase from Thermus aquaticus remains the most popular among DNA polymerases. It was widely applied in various fields involving the application of polymerase chain reaction (PCR), implying the high commercial value of this enzyme. For this reason, an attempt to obtain a high yield of Taq DNA polymerase is continuously conducted. In this study, the l-rhamnose-inducible promoter rhaBAD was utilized due to its ability to produce recombinant protein under tight control in E. coli expression system. Instead of full-length Taq polymerase, an N-terminal deletion of Taq polymerase was selected. To obtain a high-level expression, we attempted to optimize the codon by reducing the rare codon and GC content, and in a second attempt, we optimized the culture conditions for protein expression. The production of Taq polymerase using the optimum culture condition improved the level of expression by up to 3-fold. This approach further proved that a high level of recombinant protein expression could be achieved by yielding a purified Taq polymerase of about 8.5 mg/L of culture. This is the first research publication on the production of Taq polymerase with N-terminal deletion in E. coli with the control of the rhaBAD promoter system.

Codon optimization of a gene encoding DNA polymerase from Pyrococcus furiosus and its expression in Escherichia coli

BACKGROUND

DNA polymerase is an essential component in PCR assay for DNA synthesis. Improving DNA polymerase with characteristics indispensable for a powerful assay is crucial because it can be used in wide-range applications. Derived from Pyrococcus furiosus, Pfu DNA polymerase (Pfu pol) is one of the excellent polymerases due to its high fidelity. Therefore, we aimed to develop Pfu pol from a synthetic gene with codon optimization to increase its protein yield in Escherichia coli.

RESULTS

Recombinant Pfu pol was successfully expressed and purified with a two-step purification process using nickel affinity chromatography, followed by anion exchange chromatography. Subsequently, the purified Pfu pol was confirmed by Western blot analysis, resulting in a molecular weight of approximately 90 kDa. In the final purification process, we successfully obtained a large amount of purified enzyme (26.8 mg/L). Furthermore, the purified Pfu pol showed its functionality and efficiency when tested for DNA amplification using the standard PCR.

CONCLUSIONS

Overall, a high-level expression of recombinant Pfu pol was achieved by employing our approach in the present study. In the future, our findings will be useful for studies on synthesizing recombinant DNA polymerase in E. coli expression system.

Bst polymerase - a humble relative of Taq polymerase

DNA polymerases are a superfamily of enzymes synthesizing DNA using DNA as a template. They are essential for nucleic acid metabolism and for DNA replication and repair. Modern biotechnology and molecular diagnostics rely heavily on DNA polymerases in analyzing nucleic acids. Among a variety of discovered DNA polymerases, Bst polymerase, a large fragment of DNA polymerase I from Geobacillus stearothermophilus, is one of the most commonly used but is not as well studied as Taq polymerase. The ability of Bst polymerase to displace an upstream DNA strand during synthesis, coupled with its moderate thermal stability, has provided the basis for several isothermal DNA amplification methods, including LAMP, WGA, RCA, and many others. Bst polymerase is one of the key components defining the robustness and analytical characteristics of diagnostic test systems based on isothermal amplification. Here, we present an overview of the biochemical and structural features of Bst polymerase and provide information on its mutated analogs.

Quick and easy method for extraction and purification of Pfu-Sso7d, a high processivity DNA polymerase

The polymerase chain reaction is an extensively used technique with numerous applications in the field of biological sciences. In addition to naturally occurring DNA polymerases with varying processivity and fidelity, genetically engineered recombinant DNA polymerases are also used in PCR. The Pfu-Sso7d, a fusion DNA polymerase, is obtained by the fusion of Sso7d, a small DNA binding protein, to the polymerase domain of the Pfu DNA polymerase. Pfu-Sso7d is known for its high processivity, efficiency, and fidelity. Expensive commercial variants of Pfu-Sso7d are sold under various trade names. Here, we report a quick, cost and time-efficient purification protocol and an optimized buffer system for Pfu-Sso7d. We evaluated precipitation efficiencies of varying concentrations of ethanol and acetone and compared the activities of the precipitated enzyme. Although both the solvents efficiently precipitated Pfu-Sso7d, acetone showed better precipitation efficiency. Purified Pfu-Sso7d showed excellent activities in the PCR of templates with varying lengths and GC contents. We also report a buffer system that works with Pfu-Sso7d as efficiently as commercially available buffers. This quick and efficient purification scheme and buffer system will provide researchers cost-efficient access to fusion polymerases.

Bacterial thermophilic DNA polymerases: A focus on prominent biotechnological applications

DNA polymerases are the enzymes able to replicate the genetic information in nucleic acid. As a result, they are necessary to copy the complete genome of every living creature before cell division and sustain the integrity of the genetic information throughout the life of each cell. Any organism that uses DNA as its genetic information, whether unicellular or multicellular, requires one or more thermostable DNA polymerases to thrive. Thermostable DNA polymerase is important in modern biotechnology and molecular biology because it results in methods such as DNA cloning, DNA sequencing, whole genome amplification, molecular diagnostics, polymerase chain reaction, synthetic biology, and single nucleotide polymorphism detection. There are at least 14 DNA-dependent DNA polymerases in the human genome, which is remarkable. These include the widely accepted, high-fidelity enzymes responsible for replicating the vast majority of genomic DNA and eight or more specialized DNA polymerases discovered in the last decade. The newly discovered polymerases' functions are still being elucidated. Still, one of its crucial tasks is to permit synthesis to resume despite the DNA damage that stops the progression of replication-fork. One of the primary areas of interest in the research field has been the quest for novel DNA polymerase since the unique features of each thermostable DNA polymerase may lead to the prospective creation of novel reagents. Furthermore, protein engineering strategies for generating mutant or artificial DNA polymerases have successfully generated potent DNA polymerases for various applications. In molecular biology, thermostable DNA polymerases are extremely useful for PCR-related methods. This article examines the role and importance of DNA polymerase in a variety of techniques.

Molecular Characterization of a DNA Polymerase from Thermus thermophilus MAT72 Phage vB_Tt72: A Novel Type-A Family Enzyme with Strong Proofreading Activity

We present a structural and functional analysis of the DNA polymerase of thermophilic Thermus thermophilus MAT72 phage vB_Tt72. The enzyme shows low sequence identity (<30%) to the members of the type-A family of DNA polymerases, except for two yet uncharacterized DNA polymerases of T. thermophilus phages: φYS40 (91%) and φTMA (90%). The Tt72 polA gene does not complement the Escherichia colipolA− mutant in replicating polA-dependent plasmid replicons. It encodes a 703-aa protein with a predicted molecular weight of 80,490 and an isoelectric point of 5.49. The enzyme contains a nucleotidyltransferase domain and a 3′-5′ exonuclease domain that is engaged in proofreading. Recombinant enzyme with His-tag at the N-terminus was overproduced in E. coli, subsequently purified by immobilized metal affinity chromatography, and biochemically characterized. The enzyme exists in solution in monomeric form and shows optimum activity at pH 8.5, 25 mM KCl, and 0.5 mM Mg2+. Site-directed analysis proved that highly-conserved residues D15, E17, D78, D180, and D184 in 3′-5′ exonuclease and D384 and D615 in the nucleotidyltransferase domain are critical for the enzyme’s activity. Despite the source of origin, the Tt72 DNA polymerase has not proven to be highly thermoresistant, with a temperature optimum at 55 °C. Above 60 °C, the rapid loss of function follows with no activity > 75 °C. However, during heat treatment (10 min at 75 °C), trehalose, trimethylamine N-oxide, and betaine protected the enzyme against thermal inactivation. A midpoint of thermal denaturation at Tm = 74.6 °C (ΔHcal = 2.05 × 104 cal mol−1) and circular dichroism spectra > 60 °C indicate the enzyme’s moderate thermal stability.

From Sequences to Enzymes: Heterologous Expression of Genes from Marine Microbes

Heterologous expression is an easy and broadly applicable experimental approach widely used to investigate protein functions without the need to genetically manipulate the original host. The approach is used to obtain large quantities of the desired protein, which can be further analyzed from a biochemical, structural, and functional perspective. The expression system consists of three main components: (1) a foreign DNA sequence coding for the protein of interest; (2) a suitable expression vector; (3) a suitable host (bacterial, yeast, or mammalian cells) which does not encode or express the protein of interest. Here, we show how to apply an Escherichia coli-based expression system to overexpress protein encoding genes from marine microbes.

A low-cost and open-source protocol to produce key enzymes for molecular detection assays

Here, we describe a detailed step-by-step protocol for the expression, purification, quantification, and activity determination of key enzymes for molecular detection of pathogens. Based on previous reports, we optimized the protocol for LbCas12a, Taq DNA polymerase, M-MLV reverse transcriptase, and TEV protease to make it compatible with minimal laboratory equipment, broadly available in low- and middle-income countries. The enzymes produced with this protocol have been successfully used for molecular detection applications. For complete details on the use and execution of this protocol, please refer to Alcántara et al. (2021a, 2021b).

Structural dynamics and determinants of 2-aminoadenine specificity in DNA polymerase DpoZ of vibriophage ϕVC8

All genetic information in cellular life is stored in DNA copolymers composed of four basic building blocks (ATGC-DNA). In contrast, a group of bacteriophages belonging to families Siphoviridae and Podoviridae has abandoned the usage of one of them, adenine (A), replacing it with 2-aminoadenine (Z). The resulting ZTGC-DNA is more stable than its ATGC-DNA counterpart, owing to the additional hydrogen bond present in the 2-aminoadenine:thymine (Z:T) base pair, while the additional amino group also confers resistance to the host endonucleases. Recently, two classes of replicative proteins found in ZTGC-DNA-containing phages were characterized and one of them, DpoZ from DNA polymerase A (PolA) family, was shown to possess significant Z-vs-A specificity. Here, we present the crystallographic structure of the apo form of DpoZ of vibriophage ϕVC8, composed of the 3′-5′ exonuclease and polymerase domains. We captured the enzyme in two conformations that involve the tip of the thumb subdomain and the exonuclease domain. We highlight insertions and mutations characteristic of ϕVC8 DpoZ and its close homologues. Through mutagenesis and functional assays we suggest that the preference of ϕVC8 DpoZ towards Z relies on a polymerase backtracking process, more efficient when the nascent base pair is A:T than when it is Z:T.

A Single Amino Acid Change to Taq DNA Polymerase Enables Faster PCR, Reverse Transcription and Strand-Displacement

A change of an aspartic acid to asparagine of Taq (Thermus aquaticus) DNA polymerase is a gain of function mutation that supports faster PCR: the extension times for PCR amplification can be 2-3 times shorter. Surprising results from negative controls led to the discovery of strand-displacement ability and reverse transcriptase activity of Taq D732N DNA polymerase. We demonstrate that the mutant enzyme can, by itself, catalyze RT-PCR, and RT-LAMP assays. Residue 732 is on the surface of the enzyme, not near the active site.

Engineering polymerases for applications in synthetic biology

DNA polymerases play a central role in biology by transferring genetic information from one generation to the next during cell division. Harnessing the power of these enzymes in the laboratory has fueled an increase in biomedical applications that involve the synthesis, amplification, and sequencing of DNA. However, the high substrate specificity exhibited by most naturally occurring DNA polymerases often precludes their use in practical applications that require modified substrates. Moving beyond natural genetic polymers requires sophisticated enzyme-engineering technologies that can be used to direct the evolution of engineered polymerases that function with tailor-made activities. Such efforts are expected to uniquely drive emerging applications in synthetic biology by enabling the synthesis, replication, and evolution of synthetic genetic polymers with new physicochemical properties.

Studies on DNA-related enzymes to elucidate molecular mechanisms underlying genetic information processing and their application in genetic engineering

Recombinant DNA technology, in which artificially "cut and pasted" DNA in vitro is introduced into living cells, contributed extensively to the rapid development of molecular biology over the past 5 decades since the latter half of the 20^th century. Although the original technology required special experiences and skills, the development of polymerase chain reaction (PCR) has greatly eased in vitro genetic manipulation for various experimental methods. The current development of a simple genome-editing technique using CRISPR-Cas9 gave great impetus to molecular biology. Genome editing is a major technique for elucidating the functions of many unknown genes. Genetic manipulation technologies rely on enzymes that act on DNA. It involves artificially synthesizing, cleaving, and ligating DNA strands by making good use of DNA-related enzymes present in organisms to maintain their life activities. In this review, I focus on key enzymes involved in the development of genetic manipulation technologies.

Expression and functional study of VpV262 Pol, a moderately halophilic DNA polymerase from the Vibrio parahaemolyticus phage VpV262

Halophilic organisms are found widely in environments where the salt concentration is higher than 0.2 M. Halophilic proteins isolated from these organisms maintain structural integrity and function under high salt stress, whereas their non-halophilic homologs tend to aggregate and collapse. Here we report for the first time the expression and function of a DNA polymerase (DNAPol) VpV262 Pol, which belongs to DNAPol Family A from Vibrio parahaemolyticus phage VpV262. Enzymatic activity assay revealed that VpV262 Pol possessed 5'-3' polymerase activity as well as 3'-5' proofreading exonuclease activity. VpV262 Pol requires Mg²⁺ or Mn²⁺ to catalyze the polymerization reaction. Polymerization activity assay under a wide range of salt concentrations showed that VpV262 Pol maintains the highest polymerase activity with 0-0.3 M of NaCl/KCl and 0-0.5 M KAc (potassium acetate) /KGlc (potassium gluconate) when treated with 0-1 M corresponding salts, in contrast to significantly decreased activity of Phi29 Pol and Taq Pol above 0.2 M. Consistent with typical features of other halophilic proteins, negatively-charged amino acids are more frequently distributed on the surface of VpV262 Pol, contributing to highly solubility and enhanced halotolerance. While 3D-Structure of VpV262 Pol needs to be confirmed by experimental data further, this study here has added a member for the relatively small family of halotolerant DNA polymerase, and provides a valuable reference in isolation and characterization of DNA polymerases from halophilic organisms.

A novel approach for high-level expression and purification of GST-fused highly thermostable Taq DNA polymerase in Escherichia coli

Polymerases are enzymes that synthesize long chains or polymers of nucleic acids including DNA or RNA from nucleotides. They assemble nucleic acids by copying a DNA or RNA template strand using base-pairing interactions. One of the polymerase enzymes, Taq DNA polymerase, originally isolated from Thermus aquaticus (Taq) is a widely used enzyme in molecular biology so far. The thermostable properties of this enzyme have contributed majorly to the specificity, automation, and efficacy of the polymerase chain reaction (PCR), making it a powerful tool for today's molecular biology researches across the globe. The purification of Taq DNA polymerase from the native host results in low yield, more labor and time consumption. Therefore, many studies have been previously conducted to obtain this enzyme using alternative hosts. So far, all the existing methodologies are more laborious, time-consuming and require heavy expense. We used a novel approach to purify the enzyme with relatively high efficiency, yield and minimum time consumption using Escherichia coli (E. coli) as an alternative host. We cloned a 2500 base pair Taq DNA polymerase gene into pGEX-4T-1 vector, containing a GST-tag, downstream of tac promoter and overexpressed it using isopropyl β-d-1-thiogalactopyranoside (IPTG) as an inducer. The enzyme was efficiently purified using novel chromatography approaches and was used in routine PCR assays in our laboratory. Our findings suggest a novel approach to facilitate the availability of polymerases for molecular and diagnostic studies. In the future, it may be used for the purification of other recombinant peptides or proteins used in structural biology and proteomics-based researches.

Detection of Single-Nucleotide Polymorphism Markers of Antimalarial Drug Resistance Directly from Whole Blood

Monitoring of antimalarial resistance is important to prevent its further spread, but the available options for assessing resistance are less than ideal for field settings. Although molecular detection is perhaps the most efficient method, it is also the most complex because it requires DNA extraction and PCR instrumentation. To develop a more deployable approach, we designed new probes, which, when used in combination with an inhibitor-tolerant Taq polymerase, enable single-nucleotide polymorphism genotyping directly from whole blood. The probes feature two strategic design elements: locked nucleic acids to enhance specificity and the reporter dyes Cy5 and TEX615, which have less optical overlap with the blood absorbance spectra than other commonly used dyes. Probe performance was validated on a traditional laboratory-based instrument and then further tested on a field-deployable Adaptive PCR instrument to develop a point-of-care platform appropriate for use in malaria settings. The probes discriminated between wild-type Plasmodium falciparum and the chloroquine-resistant CRT PF3D7_0709000:c.227A>C (p.Lys76Thr) mutant in the presence of 2% blood. Additionally, in allelic discrimination plots with the new probes, samples clustered more closely to their respective axes compared with samples using minor groove binder probes with 6-FAM and VIC reporter dyes. Our strategy greatly simplifies single-nucleotide polymorphism detection and provides a more accessible alternative for antimalarial resistance surveillance in the field.

Polymerase Chain Reaction

The polymerase chain reaction (PCR) underlies almost all of modern molecular cloning. Using PCR, a defined target sequence that occurs once within a DNA of high complexity and large size-an entire mammalian genome, for example-can be rapidly and selectively amplified in a quasi-exponential chain reaction that generates millions of copies. The reaction is simple to set up, cheap, and undemanding, the only requirement being some knowledge of the nucleotide sequences of the target. In addition to its simplicity, PCR is robust, speedy, flexible, and sensitive.

Novel properties of recombinant Sso7d-Taq DNA polymerase purified using aqueous two-phase extraction: Utilities of the enzyme in viral diagnosis

•

Sso7d-Taq fusion protein purified using a single step of aqueous Two-Phase Extraction (ATPE) is >95% pure and is active.

•

The S-Taq protein has higher thermostability and detergent tolerance over regular Taq polymerase and can be used for PCR's from direct whole blood.

•

The PCR efficiency rate of S-Taq is higher than Taq polymerase and can be used to detect DNA viruses in a clinical setting efficiently.

•

S-Taq can tolerate higher concentrations of magnesium ions and can be used for in-situ PCR’s.

•

S-Taq can be used to carry out PCR’s of bacterial recombinants directly from the overnight culture since it is resistant to inhibition to Luria Bertani broth. This unique property of S-Taq will enable researchers to screen recombinants without the need to isolate the plasmid DNA of recombinants. This would be a huge cost savings for companies engaged in molecular biology research involving PCR’s.

Using Sso7d from Sulfolobus solfataricus as the DNA binding protein fused to Taq DNA polymerase at its amino terminus, we report the hyper-expression and a novel purification methodology of Sso7d-Taq polymerase (S-Taq) using aqueous two-phase extraction system followed by Ni-affinity chromatography. The utility of such a fusion enzyme in carrying out PCR of human genes from whole blood directly and in detecting hepatitis B virus from clinical samples is demonstrated in this article. We present data on the enhanced thermo-stability of S-Taq DNA polymerase over Taq DNA polymerase and also provide evidence of its higher stability with detergents in comparison to Taq polymerase. The purified S-Taq protein showed acceptable limits of host genomic DNA levels without the use of DNases and other DNA precipitating agents and shows promising potential for use in PCR based diagnostics, in-situ PCR’s and forensic science.

Cellular reagents for diagnostics and synthetic biology

We have found that the overproduction of enzymes in bacteria followed by their lyophilization leads to 'cellular reagents' that can be directly used to carry out numerous molecular biology reactions. We demonstrate the use of cellular reagents in a variety of molecular diagnostics, such as TaqMan qPCR with no diminution in sensitivity, and in synthetic biology cornerstones such as the Gibson assembly of DNA fragments, where new plasmids can be constructed solely based on adding cellular reagents. Cellular reagents have significantly reduced complexity and cost of production, storage and implementation, features that should facilitate accessibility and use in resource-poor conditions.

Engineering of DNA polymerase I from Thermus thermophilus using compartmentalized self-replication

Although compartmentalized self-replication (CSR) and compartmentalized partnered replication (CPR) are powerful tools for directed evolution of proteins and gene circuits, limitations remain in the emulsion PCR process with the wild-type Taq DNA polymerase used so far, including long run times, low amounts of product, and false negative results due to inhibitors. In this study, we developed a high-efficiency mutant of DNA polymerase I from Thermus thermophilus HB27 (Tth pol) suited for CSR and CPR. We modified the wild-type Tth pol by (i) deletion of the N-terminal 5' to 3' exonuclease domain, (ii) fusion with the DNA-binding protein Sso7d, (iii) introduction of four known effective point mutations from other DNA polymerase mutants, and (iv) codon optimization to reduce the GC content. Consequently, we obtained a mutant that provides higher product yields than the conventional Taq pol without decreased fidelity. Next, we performed four rounds of CSR selection with a randomly mutated library of this modified Tth pol and obtained mutants that provide higher product yields in fewer cycles of emulsion PCR than the parent Tth pol as well as the conventional Taq pol.

Structural variability of DNA-containing Mg-pyrophosphate microparticles: optimized conditions to produce particles with desired size and morphology

Our previous studies demonstrated the formation of structurally diverse DNA-containing microparticles (DNA MPs) in PCR with Mg-pyrophosphate (MgPPi) as the structure-forming component. These DNA MPs were referred to major structural types: microdisks (2D MPs) with nanometer thickness and 3D MPs with sophisticated morphology and constructed from intersecting disks and their segments. Little is known about factors that influence both the morphology and size of DNA MPs, and the present study was aimed at fulfilling this gap. We showed that the addition of Mn²⁺ cations to PCR mixtures caused the profound changes in MPs morphology, depending on DNA polymerase used (KlenTaq or Taq). Asymmetric PCR with 20-fold decrease in the concentration of one of two primers facilitated the predominant formation of microdisks with unusual structure. The addition of 1 mM Na-pyrophosphate to PCR mixtures with synthesized DNA and subsequent thermal cycling (10-15 cycles) were optimal to produce microdisks or nanometer 3D particles. Using electron microscopy, we studied also the structure of inorganic micro- and nanoparticles from MgPPi, formed during multiple heating and cooling cycles of a mixture of Mg²⁺ and Na-pyrophosphate in various regimes. Also, we found the conditions to yield planar (Mg·Mn)PPi nanocrystals (diameter ~100 nm and thickness ~10 nm) which efficiently adsorbed exogenous DNA. These inorganic nanoparticles are promising for DNA delivery in transfection studies. Mechanisms to be involved in structural modifications of MPs and perspectives of their practical application are discussed.

Characterization of Recombinant Thermococcus kodakaraensis (KOD) DNA Polymerases Produced Using Silkworm-Baculovirus Expression Vector System

The KOD DNA polymerase from Thermococcus kodakarensis (Tkod-Pol) has been preferred for PCR due to its rapid elongation rate, extreme thermostability and outstanding fidelity. Here in this study, we utilized silkworm-baculovirus expression vector system (silkworm-BEVS) to express the recombinant Tkod-Pol (rKOD) with N-terminal (rKOD-N) or C-terminal (rKOD-C) tandem fusion tags. By using BEVS, we produced functional rKODs with satisfactory yields, about 1.1 mg/larva for rKOD-N and 0.25 mg/larva for rKOD-C, respectively. Interestingly, we found that rKOD-C shows higher thermostability at 95 °C than that of rKOD-N, while that rKOD-N is significantly unstable after exposing to long period of heat-shock. We also assessed the polymerase activity as well as the fidelity of purified rKODs under various conditions. Compared with commercially available rKOD, which is expressed in E. coli expression system, rKOD-C exhibited almost the same PCR performance as the commercial rKOD did, while rKOD-N did lower performance. Taken together, our results suggested that silkworm-BEVS can be used to express and purify efficient rKOD in a commercial way.

DNA polymerases as useful reagents for biotechnology - the history of developmental research in the field

DNA polymerase is a ubiquitous enzyme that synthesizes complementary DNA strands according to the template DNA in living cells. Multiple enzymes have been identified from each organism, and the shared functions of these enzymes have been investigated. In addition to their fundamental role in maintaining genome integrity during replication and repair, DNA polymerases are widely used for DNA manipulation in vitro, including DNA cloning, sequencing, labeling, mutagenesis, and other purposes. The fundamental ability of DNA polymerases to synthesize a deoxyribonucleotide chain is conserved. However, the more specific properties, including processivity, fidelity (synthesis accuracy), and substrate nucleotide selectivity, differ among the enzymes. The distinctive properties of each DNA polymerase may lead to the potential development of unique reagents, and therefore searching for novel DNA polymerase has been one of the major focuses in this research field. In addition, protein engineering techniques to create mutant or artificial DNA polymerases have been successfully developing powerful DNA polymerases, suitable for specific purposes among the many kinds of DNA manipulations. Thermostable DNA polymerases are especially important for PCR-related techniques in molecular biology. In this review, we summarize the history of the research on developing thermostable DNA polymerases as reagents for genetic manipulation and discuss the future of this research field.

Heat-stable enzymes from extremely thermophilic and hyperthermophilic microorganisms

Only in the last decade have microorganisms been discovered which grow near or above 100°C. The enzymes that are formed by these extremely thermophilic (growth temperature 65 to 85°C) and hyperthermophilic (growth temperature 85 to 110°C) microorganisms are of great interest. This review covers the extracellular and intracellular enzymes of these exotic microorganisms that have recently been described. Polymer-hydrolysing enzymes, such as amylolytic, cellulolytic, hemicellulolytic and proteolytic enzymes, will be discussed. In addition, the properties of the intracellular enzymes involved in carbohydrate and amino-acid metabolism and DNA-binding and chaperones and chaperone-like proteins from hyperthermophiles are described. Due to the unusual properties of these heat-stable enzymes, they are expected to fill the gap between biological and chemical processes.

Stopped-flow DNA polymerase assay by continuous monitoring of dNTP incorporation by fluorescence

DNA polymerase activity was measured by a stopped-flow assay that monitors polymerase extension using an intercalating dye. Double-stranded DNA formation during extension of a hairpin substrate was monitored at 75°C for 2 min. Rates were determined in nucleotides per second per molecule of polymerase (nt/s) and were linear with time and polymerase concentration from 1 to 50 nM. The concentrations of 15 available polymerases were quantified and their extension rates determined in 50 mM Tris, pH 8.3, 0.5 mg/ml BSA, 2 mM MgCl₂, and 200 μM each dNTP as well as their commercially recommended buffers. Native Taq polymerases had similar extension rates of 10-45 nt/s. Three alternative polymerases showed faster speeds, including KOD (76 nt/s), Klentaq I (101 nt/s), and KAPA2G (155 nt/s). Fusion polymerases including Herculase II and Phusion were relatively slow (3-13 nt/s). The pH optimum for Klentaq extension was between 8.5 and 8.7 with no effect of Tris concentration. Activity was directly correlated to the MgCl2 concentration and inversely correlated to the KCl concentration. This continuous assay is relevant to PCR and provides accurate measurement of polymerase activity using a defined template without the need of radiolabeled substrates.

Chlamydophila pneumoniae endonuclease IV prefers to remove mismatched 3' ribonucleotides: implication in proofreading mismatched 3'-terminal nucleotides in short-patch repair synthesis

DNA polymerase I (DNApolI) catalyzes DNA synthesis during Okazaki fragment maturation, base excision repair, and nucleotide excision repair. Some bacterial DNApolIs are deficient in 3'-5' exonuclease, which is required for removing an incorrectly incorporated 3'-terminal nucleotide during DNA elongation by DNA polymerase activity. The key amino acid residues in the exonuclease center of Chlamydophila pneumoniae DNApolI (CpDNApolI) are naturally mutated, resulting in the loss of 3'-5' exonuclease. Hence, the manner by which CpDNApolI proofreads the incorrectly incorporated nucleotide during DNA synthesis warrants clarification. C. pneumoniae encodes three 3'-5' exonuclease activities: one endonuclease IV and two homologs of the epsilon subunit of replicative DNA polymerase III. The three proteins were biochemically characterized using single- and double-stranded DNA substrate. Among them, C. pneumoniae endonuclease IV (CpendoIV) possesses 3'-5' exonuclease activity that prefers to remove mismatched 3'-terminal nucleotides in the nick, gap, and 3' recess of a double-stranded DNA (dsDNA). Finally, we reconstituted the proofreading reaction of the mismatched 3'-terminal nucleotide using the dsDNA with a nick or 3' recess as substrate. Upon proofreading of the mismatched 3'-terminal nucleotide by CpendoIV, CpDNApolI can correctly reincorporate the matched nucleotide and the nick is further sealed by DNA ligase. Based on our biochemical results, we proposed that CpendoIV was responsible for proofreading the replication errors of CpDNApolI.

The role of electrostatic interactions on klentaq1 insight for domain separation

We investigated the relationship between the thermostability of Klentaq1 and factors stabilizing interdomain interactions. When thermal adaptation of Klentaq1 was analyzed at the atomic level, the protein was stable at 300 and 350 K. It gradually unfolded at 373 K and almost spontaneously unfolded at 400 K. Domain separation was induced by disrupting electrostatic interactions in two salt bridges formed by Lys354-Glu445 and Asp371-Arg435 on the interface domain. The role of these interactions in protein stability was evaluated by comparing free energy solvation (ΔΔG_solv) between wild type and mutants. Substitution of Asp371 by Glu or Asn, and also Glu445 by Asn resulted in a positive value of ΔΔG_solv, suggesting that mutations destabilized the protein structure. Nevertheless, substitution of Glu445 by Asp gave a negative value to ΔΔG_solv reflecting increasing protein stability. Our results demonstrate that interactions at the interface domains of Klentaq1 are essential factors correlated with the Klentaq1 thermostability.

A new hybrid fractal algorithm for predicting thermophilic nucleotide sequences

Knowledge of thermophilic mechanisms about some organisms whose optimum growth temperature (OGT) ranges from 50 to 80 degree plays a major role in helping design stable proteins. How to predict a DNA sequence to be thermophilic is a long but not fairly resolved problem. Chaos game representation (CGR) can investigate the patterns hiding in DNA sequences, and can visually reveal previously unknown structure. Fractal dimensions are good tools to measure sizes of complex, highly irregular geometric objects. In this paper, we convert every DNA sequence into a high dimensional vector by CGR algorithm and fractal dimension, and then predict the DNA sequence thermostability by these fractal features and support vector machine (SVM). We have conducted experiments on three groups: 17-dimensional vector, 65-dimensional vector, and 257-dimensional vector. Each group is evaluated by the 10-fold cross-validation test. For the results, the group of 257-dimensional vector gets the best results: the average accuracy is 0.9456 and average MCC is 0.8878. The results are also compared with the previous work with single CGR features. The comparison shows the high effectiveness of the new hybrid fractal algorithm.

Generation of chemically engineered ribosomes for atomic mutagenesis studies on protein biosynthesis

The protocol describes the site-specific chemical modification of 23S rRNA of Thermus aquaticus ribosomes. The centerpiece of this 'atomic mutagenesis' approach is the site-specific incorporation of non-natural nucleoside analogs into 23S rRNA in the context of the entire 70S ribosome. This technique exhaustively makes use of the available crystallographic structures of the ribosome for designing detailed biochemical experiments aiming at unraveling molecular insights of ribosomal functions. The generation of chemically engineered ribosomes carrying a particular non-natural 23S rRNA residue at the site of interest, a procedure that typically takes less than 2 d, allows the study of translation at the molecular level and goes far beyond the limits of standard mutagenesis approaches. This methodology, in combination with the presented tests for ribosomal functions adapted to chemically engineered ribosomes, allows unprecedented molecular insight into the mechanisms of protein biosynthesis.

[Oligonucleotide derivatives in the nucleic acid hybridization analysis. II. Isothermal signal amplification in process of DNA analysis by minisequencing]

The isothermal amplification of reporter signal via limited probe extension (minisequencing) upon hybridization of nucleic acids has been studied. The intensity of reporter signal has been shown to increase due to enzymatic labeling of multiple probes upon consecutive hybridization with one DNA template both in homophase and heterophase assays using various kinds of detection signal: radioisotope label, fluorescent label, and enzyme-linked assay. The kinetic scheme of the process has been proposed and kinetic parameters for each step have been determined. The signal intensity has been shown to correlate with physicochemical characteristics of both complexes: probe/DNA and product/DNA. The maximum intensity has been observed at minimal difference between the thermodynamic stability of these complexes, provided the reaction temperature has been adjusted near their melting temperature values; rising or lowering the reaction temperature reduces the amount of reporting product. The signal intensity has been shown to decrease significantly upon hybridization with the DNA template containing single-nucleotide mismatches. Limited probe extension assay is useful not only for detection of DNA template but also for its quantitative characterization.

Characterization of an ATP-regulated DNA-processing enzyme and thermotolerant phosphoesterase in the radioresistant bacterium Deinococcus radiodurans

A multiprotein DNA-processing complex identified from Deinococcus radiodurans exhibits uncharacterized ATP-sensitive nuclease functions. DR0505 was one of the 24 polypeptides identified from the complex. It contains two 5' nucleotidase motifs, one is at the C-terminal end of the N-terminal CPDD (calcineurin phosphodiesterase domain), with the second at the C-terminal end of the protein. Recombinant DR0505 showed both phosphomonoesterase and phosphodiesterase activities with chromogenic substrates, showing higher affinity for bis-(p-nitrophenyl) phosphate than for p-nitrophenyl phosphate. The enzyme exhibited pH optima ranging from 8.0 to 9.0 and metal-ion-dependent thermotolerance of esterase functions. Both mono- and di-esterase activities were stable at temperatures up to 50 °C in the presence of Mg2+, whereas monoesterase activity was observed at temperatures up to 80 °C in the presence of Mn2+ and up to 50 °C with Ca2+. The purified enzyme showed 5' nucleotidase activity on a wide range of natural mononucleotides including cyclic mononucleotides and 8-oxo-GMP. DR0505 showed a nearly 7-fold higher activity on ADP than AMP, but this activity was inhibited with ATP. Interestingly, DR0505 also showed single-stranded endonuclease and 3'→5' exonuclease activities on both single-stranded and double-stranded DNA-substrates. Unlike for the exonuclease activity, the single-stranded endonuclease activities observed on stem-loop substrates and at the single strand-double-strand junction in forked-hairpin substrates were not inhibited with ATP. These results suggested that DR0505 is an ATP-regulated DNA-processing enzyme and a thermotolerant esterase in vitro. We therefore suggest possible roles of this enzyme in nucleotide recycling and DNA processing, which is required for efficient double-strand break repair and the high radiation tolerance observed in D. radiodurans.

Road blocks on paleogenomes--polymerase extension profiling reveals the frequency of blocking lesions in ancient DNA

Although the last few years have seen great progress in DNA sequence retrieval from fossil specimens, some of the characteristics of ancient DNA remain poorly understood. This is particularly true for blocking lesions, i.e. chemical alterations that cannot be bypassed by DNA polymerases and thus prevent amplification and subsequent sequencing of affected molecules. Some studies have concluded that the vast majority of ancient DNA molecules carry blocking lesions, suggesting that the removal, repair or bypass of blocking lesions might dramatically increase both the time depth and geographical range of specimens available for ancient DNA analysis. However, previous studies used very indirect detection methods that did not provide conclusive estimates on the frequency of blocking lesions in endogenous ancient DNA. We developed a new method, polymerase extension profiling (PEP), that directly reveals occurrences of polymerase stalling on DNA templates. By sequencing thousands of single primer extension products using PEP methodology, we have for the first time directly identified blocking lesions in ancient DNA on a single molecule level. Although we found clear evidence for blocking lesions in three out of four ancient samples, no more than 40% of the molecules were affected in any of the samples, indicating that such modifications are far less frequent in ancient DNA than previously thought.

[Microparticles from coupled DNA formed in the process of polymerase chain reaction]

DNA microparticle formation in the course of a polymerase chain reaction (PCR) is reported. PCR with gene-specific and partially complementary primers and yeast genomic DNA as a template was shown to yield spherical DNA-composed microparticles as well as their aggregates and conglomerates, along with routine linear DNA. Microparticles were formed at late PCR stages and could be easily identified by the reaction with fluorescently labeled oligonucleotide primers or by staining of the PCR mixture with fluorescent dyes (acridine orange, propidium iodide or DAPI). According to the data of epifluorescent and electron microscopy, the microparticle size varied from 500 nm to 3-4 microm and the particles were multimeric star-shaped spheres or aggregates formed by several fused microspheres. Some properties of the microspheres were studied. It was found that the Mg2+ cations comprising the PCR buffer played a key role in the formation of microparticles and the stabilization of their structures.

A new DNA polymerase I from Geobacillus caldoxylosilyticus TK4: cloning, characterization, and mutational analysis of two aromatic residues

DNA polymerase I gene was cloned and sequenced from the thermophilic bacterium Geobacillus caldoxylosilyticus TK4. The gene is 2,634 bp long and encodes a protein of 878 amino acids in length. The enzyme has a molecular mass of 99 kDa and shows sequence homology with DNA polymerase I from Bacillus species (89% identity). The gene was overexpressed in Escherichia coli and the purified enzyme was biochemically characterized. It has all of the primary structural elements necessary for DNA polymerase and 5' --> 3' exonuclease activity, but lacks the motifs required for 3' --> 5' exonuclease activity. 5' nuclease and 3' --> 5' exonuclease assays confirmed that Gca polymerase I has a double-stranded DNA-dependent 5' --> 3' nuclease activity but no 3' --> 5' exonuclease activity. Its specific activity was observed to be 495,000 U/mg protein, and K (D) (DNA) , K (D) (dNTP) , and K (pol) were found to be 0.19 nM, 22.64 microM, and 24.99 nucleotides(-1), respectively. The enzyme showed significant reverse-transcriptase activity (RT) with Mn(2+), but very little RT activity with Mg(2+). Its error rate was found to be 2.5 x 10(-5) which is comparable to that of the previously reported error rate for the E. coli DNA polymerase I. Two aromatic residues required for dideoxyribonucleotide triphosphate sensitivity (F712Y) and strand displacement activity (Y721F) were identified.

Strategies for overcoming PCR inhibition

INTRODUCTIONThe use of conventional and real-time PCR is to some extent restricted by the presence of PCR inhibitors. This is particularly so when the techniques are applied directly to complex biological samples such as clinical, environmental, or food samples for the detection of microorganisms. PCR inhibitors can originate from the sample itself, or as a result of the method used to collect or otherwise prepare the sample. Either way, inhibitors can dramatically reduce the sensitivity and amplification efficiency of PCR. This article discusses methods of reducing inhibition and designing reliable and sensitive conventional and real-time PCR experiments.

Several concerns about the primer design in the universal molecular beacon real-time PCR assay and its application in HBV DNA detection

A universal hepatitis B virus (HBV) DNA detection kit is appealing for the worldwide diagnosis and monitoring of the treatment of different mutant types of hepatitis B virus. A sensitive and reproducible real-time PCR assay based on the universal molecular beacon (U-MB) technique was developed for the detection of HBV DNA in serum. The U-MB probe used in the assay has no interaction with the HBV DNA sequence. The U-MB technique not only reduced the cost of HBV detection but also had the potential for the development of a universal detection kit for different mutant HBV types and other DNA systems. To demonstrate its clinical utility, 90 serum samples were analyzed using the U-MB real-time PCR method. In the experiments we found that several crucial factors needed to be considered in the primer design, such as the avoidance of formation of severe primer-dimer and primer self-hairpin structure. With the optimized primer sets, satisfactory results were obtained for all the tested samples. We concluded that this assay would be an excellent candidate for a universal HBV DNA detection method.