Human immunodeficiency virus protease

Non-active site mutations in the HIV protease: Diminished drug binding affinity is achieved through modulating the hydrophobic sliding mechanism

The global HIV/AIDS epidemic still currently affects approximately 38 million individuals globally. The protease enzyme of the human immunodeficiency virus is a major drug target in antiviral therapy, however, under the influence of reverse transcriptase and in the context of drug pressure, the rapid PR mutation rate contributes significantly to clinical failure. The set of cooperative non-active site mutations, I13V/I62V/V77I, have been associated with reduced inhibitor susceptibility and are the focus of the current study. When compared to the wild-type protease the mutant protease exhibited decreased binding affinities towards ATV and DRV by 64- and 12-fold, respectively, and decreased the overall favourable Gibbs free energy for ATV, DRV, RTV and SQV. Moreover, these mutations decreased the thermal stability of the protease when in complex with ATV and DRV by approximately 6.4 and 4.2 °C, respectively. The crystal structure of the mutant protease revealed that the location of these mutations and their effect on the hydrophobic sliding mechanism may be crucial in their role in resistance.

Improved Production of HIV-1 Subtype C Protease from Transgenic E. Coli

Background:

Human Immunodeficiency Virus 1 (HIV-1) subtype C is responsible for the majority of infections of patients in Southern Africa. The HIV protease is a primary target for the development of highly efficient anti-retroviral pharmaceuticals because of its pivotal role in the maturation of the virus in the host cell. For target validation of novel HIV protease inhibitors, there is a need for the availability of an abundance of this protease.

Objective:

This study reports an optimized method to produce HIV-1 protease derived from HIV-1 subtype C.

Methods:

It involves the use of a transgenic E. coli strain that overexpresses the native form of the enzyme via inclusion bodies. A stringent method for the isolation, purification, and renaturation resulted in the production of highly pure active HIV-1 protease. In order to facilitate an increase in protease yields, an optimized growth strategy was developed. In this regard, a chemically defined medium with lower glucose content and devoid of essential amino acids of the TCA cycle was used as an alternative to the widely used nutrient-rich Luria Bertani (LB) medium.

Results:

Results indicated an increase in protease yield up to twice the amount, thereby making this medium an attractive alternative for increasing biomass and HIV protease production for future research.

Conclusion:

An optimized method for HIV-1 protease derived from HIV-1 subtype C production using chemically defined media was established. This was achieved using a known method to isolate and purify the enzyme with the use of a specialized feeding strategy.

Off-Target-Based Design of Selective HIV-1 PROTEASE Inhibitors

The approval of the first HIV-1 protease inhibitors (HIV-1 PRIs) marked a fundamental step in the control of AIDS, and this class of agents still represents the mainstay therapy for this illness. Despite the undisputed benefits, the necessary lifelong treatment led to numerous severe side-effects (metabolic syndrome, hepatotoxicity, diabetes, etc.). The HIV-1 PRIs are capable of interacting with "secondary" targets (off-targets) characterized by different biological activities from that of HIV-1 protease. In this scenario, the in-silico techniques undoubtedly contributed to the design of new small molecules with well-fitting selectivity against the main target, analyzing possible undesirable interactions that are already in the early stages of the research process. The present work is focused on a new mixed-hierarchical, ligand-structure-based protocol, which is centered on an on/off-target approach, to identify the new selective inhibitors of HIV-1 PR. The use of the well-established, ligand-based tools available in the DRUDIT web platform, in combination with a conventional, structure-based molecular docking process, permitted to fast screen a large database of active molecules and to select a set of structure with optimal on/off-target profiles. Therefore, the method exposed herein, could represent a reliable help in the research of new selective targeted small molecules, permitting to design new agents without undesirable interactions.

The Influence of Hydrogen Atoms on the Performance of Radial Distribution Function-Based Descriptors in the Chemoinformatic Studies of HIV-1 Protease Complexes with Inhibitors

AIMS

The aim of this letter is to explore the influence of adding hydrogen atoms to the crystallographic structures of HIV-1 protease complexes with a series of inhibitors on the performance of radial distribution function based descriptors recently introduced in chemoinformatic studies.

BACKGROUND

Quite recently the successful application of molecular descriptors based on a radial distribution function to correlate it with biologically interesting properties of a ligand - enzyme complex was demonstrated. Except its predictive power, the analysis of atoms with dominant contributions to the RDFs can be used to identify relevant atoms and interactions. Since original paper was published on dataset consisting of the X-ray structures of complexes without hydrogen atoms, we wonder weather addition of light atoms can provide us new piece of information.

OBJECTIVE

The primarily objective is to create the model correlating the RDF based descriptors and physicochemical properties of the HIV-1 protease complexes with inhibitors with hydrogen atoms. Then, we will compare the performance of new model with previous one, where the hydrogen atoms were discarded. Information about interactions between the enzyme and the inhibitors will be extracted from the analysis of the RDF.

METHODS

The radial distribution function descriptor weighted by the number of valence shell electrons has proven to be sensitive to the changes in the structure of the enzyme and enzyme-ligand complexes. For each structure in our data set, RDF will be calculated and using multiple linear regression method the mathematical model will be designed correlating RDF based descriptors and the physicochemical properties. Statistical analysis of the atom's contribution to the total RDF will reveal relevant interactions.

RESULTS

The applicability of RDF based descriptor for the correlation with pKi and EC50 values is demonstrated, while simple models containing only two or three parameters are able to explain 78 and 86 % of the variance, respectively. The models with explicitly included hydrogens are of comparable quality with the previous models without hydrogens. The analysis of the atom's dominant contributions highlighted the importance of the hydroxyl groups of the inhibitor near the Asp25 and Asp25' residues when it is bounded to the protease.

CONCLUSION

Models based on the RDF weighted by the number of valence shell electrons for correlating small number of molecular descriptors and physicocehmical properties for structures with and without hydrogens are of comparable quality and both can be used for identification of relevant functional groups and interactions. Other: Our approach can be integrated to the next generation virtual screening methods, because is fast, reliable with high predictability potential.

What Are We Missing? The Detergent Triton X-100 Added to Avoid Compound Aggregation Can Affect Assay Results in an Unpredictable Manner

In this study we show that the detergent Triton X-100, which is widely used in screening campaigns, significantly decreases the binding affinities of some known specific inhibitors of HIV-1 protease and the well-established model protease endothiapepsin in a fluorescence-based assay. Surprisingly, other structurally related inhibitors remain entirely unaffected. As a consequence, those compounds that were affected would most likely have been misclassified as unspecific binders, although they are actually true positives, and thus could be considered excellent starting points for further hit optimization.

Multiple Mutations in the Human Immunodeficiency Virus Protease Gene Are Responsible for Decreased Susceptibility to Protease Inhibitors

The protease (PR) of the human immunodeficiency virus (HIV) is essential for replication of the virus, and accordingly has become an attractive target for the development of an antiretroviral drug. We have previously reported that passage of HIV-1 in the presence of increasing concentrations of the C-2 symmetrical, linear diol P9941 resulted in the isolation of virus with a valine-to-alanine change at position 82 (V82A) of the PR, and reduced sensitivity to certain PR inhibitors. In this study, we passaged four different variants of HIV-1 in increasing concentrations of XM323, and isolated variants with reduced sensitivity to inhibitors of PR. Twenty-three passages of HIV-1 (RF) in the presence of XM323 resulted in a variant that exhibited an approximately 100-fold reduction in susceptibility to XM323 and that contained V82F and I84V changes. When two other viruses, HIV-1 (RF41D2) and HIV-1(RF41E4), previously derived from HIV-1 (RF) by passage in the presence of P9941, were passaged in the presence of XM323, variants with V82A/L97V and M46L/V82A/L97V changes, respectively, were obtained. The M46L/V82A/L97V variant showed a 6-fold reduction in sensitivity to XM323, whereas the susceptibility of the V82A/L97V mutant remained unchanged. Seventeen passages of a clinical isolate of HIV-1, HIV-1 (Pat.E), in the presence of XM323 produced a V82F/L97V mutant with an approximately 9-fold reduction in sensitivity to XM323.

Fluorinated Analogues of the p17/p24 Sequence Incorporating 3-fluoro and 3,3-difluoro Phenylalanines as Potential Inhibitors of HIV Protease

The synthesis and activity of a series of fluorinated peptide analogues of the p17/p24 sequence incorporating 3-fluoro and 3,3-difluoro phenylananines at the P1 position of the scissile bond are described. It was hoped that these might act as potent inhibitors of HIV protease. In fact, none of the compounds studied displayed any anti-HIV activity in vitro. This may be attributed to poor cell penetration of the compounds and metabolic cleavage of their peptide bonds.

Unraveling HIV protease flaps dynamics by Constant pH Molecular Dynamics simulations

The active site of HIV protease (HIV-PR) is covered by two flaps. These flaps are known to be essential for the catalytic activity of the HIV-PR, but their exact conformations at the different stages of the enzymatic pathway remain subject to debate. Understanding the correct functional dynamics of the flaps might aid the development of new HIV-PR inhibitors. It is known that, the HIV-PR catalytic efficiency is pH-dependent, likely due to the influence of processes such as charge transfer and protonation/deprotonation of ionizable residues. Several Molecular Dynamics (MD) simulations have reported information about the HIV-PR flaps. However, in MD simulations the protonation of a residue is fixed and thus it is not possible to study the correlation between conformation and protonation state. To address this shortcoming, this work attempts to capture, through Constant pH Molecular Dynamics (CpHMD), the conformations of the apo, substrate-bound and inhibitor-bound HIV-PR, which differ drastically in their flap arrangements. The results show that the HIV-PR flaps conformations are defined by the protonation of the catalytic residues Asp25/Asp25' and that these residues are sensitive to pH changes. This study suggests that the catalytic aspartates can modulate the opening of the active site and substrate binding.

An efficient procedure for the expression and purification of HIV-1 protease from inclusion bodies

Several studies have focused on HIV-1 protease for developing drugs for treating AIDS. Recombinant HIV-1 protease is used to screen new drugs from synthetic compounds or natural substances. However, large-scale expression and purification of this enzyme is difficult mainly because of its low expression and solubility. In this study, we constructed 9 recombinant plasmids containing a sequence encoding HIV-1 protease along with different fusion tags and examined the expression of the enzyme from these plasmids. Of the 9 plasmids, pET32a(+) plasmid containing the HIV-1 protease-encoding sequence along with sequences encoding an autocleavage site GTVSFNF at the N-terminus and TEV plus 6× His tag at the C-terminus showed the highest expression of the enzyme and was selected for further analysis. The recombinant protein was isolated from inclusion bodies by using 2 tandem Q- and Ni-Sepharose columns. SDS-PAGE of the obtained HIV-1 protease produced a single band of approximately 13 kDa. The enzyme was recovered efficiently (4 mg protein/L of cell culture) and had high specific activity of 1190 nmol min(-1) mg(-1) at an optimal pH of 4.7 and optimal temperature of 37 °C. This procedure for expressing and purifying HIV-1 protease is now being scaled up to produce the enzyme on a large scale for its application.

Retroviral proteases and their roles in virion maturation

Proteolytic processing of viral polyproteins is essential for retrovirus infectivity. Retroviral proteases (PR) become activated during or after assembly of the immature, non-infectious virion. They cleave viral polyproteins at specific sites, inducing major structural rearrangements termed maturation. Maturation converts retroviral enzymes into their functional form, transforms the immature shell into a metastable state primed for early replication events, and enhances viral entry competence. Not only cleavage at all PR recognition sites, but also an ordered sequence of cleavages is crucial. Proteolysis is tightly regulated, but the triggering mechanisms and kinetics and pathway of morphological transitions remain enigmatic. Here, we outline PR structures and substrate specificities focusing on HIV PR as a therapeutic target. We discuss design and clinical success of HIV PR inhibitors, as well as resistance development towards these drugs. Finally, we summarize data elucidating the role of proteolysis in maturation and highlight unsolved questions regarding retroviral maturation.

Screening of HIV-1 Protease Using a Combination of an Ultra-High-Throughput Fluorescent-Based Assay and RapidFire Mass Spectrometry

HIV-1 protease (PR) represents one of the primary targets for developing antiviral agents for the treatment of HIV-infected patients. To identify novel PR inhibitors, a label-free, high-throughput mass spectrometry (HTMS) assay was developed using the RapidFire platform and applied as an orthogonal assay to confirm hits identified in a fluorescence resonance energy transfer (FRET)-based primary screen of > 1 million compounds. For substrate selection, a panel of peptide substrates derived from natural processing sites for PR was evaluated on the RapidFire platform. As a result, KVSLNFPIL, a new substrate measured to have a ~ 20- and 60-fold improvement in k cat/K m over the frequently used sequences SQNYPIVQ and SQNYPIV, respectively, was identified for the HTMS screen. About 17% of hits from the FRET-based primary screen were confirmed in the HTMS confirmatory assay including all 304 known PR inhibitors in the set, demonstrating that the HTMS assay is effective at triaging false-positives while capturing true hits. Hence, with a sampling rate of ~7 s per well, the RapidFire HTMS assay enables the high-throughput evaluation of peptide substrates and functions as an efficient tool for hits triage in the discovery of novel PR inhibitors.

Induced maturation of human immunodeficiency virus

HIV-1 assembles at the plasma membrane of virus-producing cells as an immature, noninfectious particle. Processing of the Gag and Gag-Pol polyproteins by the viral protease (PR) activates the viral enzymes and results in dramatic structural rearrangements within the virion--termed maturation--that are a prerequisite for infectivity. Despite its fundamental importance for viral replication, little is currently known about the regulation of proteolysis and about the dynamics and structural intermediates of maturation. This is due mainly to the fact that HIV-1 release and maturation occur asynchronously both at the level of individual cells and at the level of particle release from a single cell. Here, we report a method to synchronize HIV-1 proteolysis in vitro based on protease inhibitor (PI) washout from purified immature virions, thereby temporally uncoupling virus assembly and maturation. Drug washout resulted in the induction of proteolysis with cleavage efficiencies correlating with the off-rate of the respective PR-PI complex. Proteolysis of Gag was nearly complete and yielded the correct products with an optimal half-life (t(1/2)) of ~5 h, but viral infectivity was not recovered. Failure to gain infectivity following PI washout may be explained by the observed formation of aberrant viral capsids and/or by pronounced defects in processing of the reverse transcriptase (RT) heterodimer associated with a lack of RT activity. Based on our results, we hypothesize that both the polyprotein processing dynamics and the tight temporal coupling of immature particle assembly and PR activation are essential for correct polyprotein processing and morphological maturation and thus for HIV-1 infectivity.

IMPORTANCE

Cleavage of the Gag and Gag-Pol HIV-1 polyproteins into their functional subunits by the viral protease activates the viral enzymes and causes major structural rearrangements essential for HIV-1 infectivity. This proteolytic maturation occurs concomitant with virus release, and investigation of its dynamics is hampered by the fact that virus populations in tissue culture contain particles at all stages of assembly and maturation. Here, we developed an inhibitor washout strategy to synchronize activation of protease in wild-type virus. We demonstrated that nearly complete Gag processing and resolution of the immature virus architecture are accomplished under optimized conditions. Nevertheless, most of the resulting particles displayed irregular morphologies, Gag-Pol processing was not faithfully reconstituted, and infectivity was not recovered. These data show that HIV-1 maturation is sensitive to the dynamics of processing and also that a tight temporal link between virus assembly and PR activation is required for correct polyprotein processing.

A drug discovery platform: a simplified immunoassay for analyzing HIV protease activity

Although numerous methods for the determination of HIV protease (HIV-PR) activity have been described, new high-throughput assays are required for clinical and pharmaceutical applications due to the occurrence of resistant strains. In this study, a simple enzymatic immunoassay to identify HIV-PR activity was developed based on a Ni(2+)-immobilized His(6)-Matrix-Capsid substrate (H(6)MA-CA) is cleaved by HIV protease-His(6) (HIV-PRH(6)) which removes the CA domain and exposes the free C terminus of MA. Following this cleavage, two monoclonal antibodies specific for either the free C-terminal MA or CA epitope are used to quantify the proteolytic activity using a standard ELISA-based system. Specificity for detection of the HIV-PRH(6) activity was confirmed with addition of protease inhibitor (PI), lopinavir. In addition, the assay was able to detect an HIV-PR variant activity indicating that this assay is capable of assessing viral mutation affect HIV-PR activity. The efficacy of commercially available PIs and their 50% inhibitory concentration (IC(50)) were determined. This assay provides a high-throughput method for both validating the efficiency of new drugs in vitro and facilitating the discovery of new PIs. In addition, it could serve as a method for examining the influence of various mutations in HIV-PRs isolated from drug-resistant strains.

Novel method for probing the specificity binding profile of ligands: applications to HIV protease

A detailed understanding of factors influencing the binding specificity of a ligand to a set of desirable targets and undesirable decoys is a key step in the design of potent and selective therapeutics. We have developed a general method for optimizing binding specificity in ligand-receptor complexes based on the theory of electrostatic charge optimization. This methodology can be used to tune the binding of a ligand to a panel of potential targets and decoys, along the continuum from narrow binding to only one partner to broad binding to the entire panel. Using HIV-1 protease as a model system, we probe specificity in three distinct ways. First, we probe interactions that could make the promiscuous protease inhibitor pepstatin more selective toward HIV-1 protease. Next, we study clinically approved HIV-1 protease inhibitors and probe ways to broaden the binding profiles toward both wild-type HIV-1 protease and drug-resistant mutants. Finally, we study a conformational ensemble of wild-type HIV-1 protease to 'design in' broad specificity to known drugs before resistance mutations arise. The results from this conformational ensemble were similar to those from the drug-resistant ensemble, suggesting the use of a conformational wild-type ensemble as a tool to develop escape-mutant-resistant inhibitors.

Characterization of recombinant CDR1, an Arabidopsis aspartic proteinase involved in disease resistance

The Arabidopsis thaliana constitutive disease resistance 1 (CDR1) gene product is an aspartic proteinase that has been implicated in disease resistance signaling (Xia, Y., Suzuki, H., Borevitz, J., Blount, J., Guo, Z., Patel, K., Dixon, R. A., and Lamb, C. (2004) EMBO J. 23, 980-988). This apoplastic enzyme is a member of the group of "atypical" plant aspartic proteinases. As for other enzymes of this subtype, CDR1 has remained elusive until recently as a result of its unusual properties and localization. Here we report on the heterologous expression and characterization of recombinant CDR1, which displays unique enzymatic properties among plant aspartic proteinases. The highly restricted specificity requirements, insensitivity toward the typical aspartic proteinase inhibitor pepstatin A, an unusually high optimal pH of 6.0-6.5, proteinase activity without irreversible prosegment removal, and dependence of catalytic activity on formation of a homo-dimer are some of the unusual properties observed for recombinant CDR1. These findings unveil a pattern of unprecedented functional complexity for Arabidopsis CDR1 and are consistent with a highly specific and regulated biological function.

Isolation and characterization of recombinant Drosophila Copia aspartic proteinase

The wild type Copia Gag precursor protein of Drosophila melanogaster expressed in Escherichia coli was shown to be processed autocatalytically to generate two daughter proteins with molecular masses of 33 and 23 kDa on SDS/PAGE. The active-site motif of aspartic proteinases, Asp-Ser-Gly, was present in the 23 kDa protein corresponding to the C-terminal half of the precursor protein. The coding region of this daughter protein (152 residues) in the copia gag gene was expressed in E. coli to produce the recombinant enzyme protein as inclusion bodies, which was then purified and refolded to create the active enzyme. Using the peptide substrate His-Gly-Ile-Ala-Phe-Met-Val-Lys-Glu-Val-Asn (cleavage site: Phe-Met) designed on the basis of the sequence of the cleavage-site region of the precursor protein, the enzymatic properties of the proteinase were investigated. The optimum pH and temperature of the proteinase toward the synthetic peptide were 4.0 and 70 degrees C respectively. The proteolytic activity was increased with increasing NaCl concentration in the reaction mixture, the optimum concentration being 2 M. Pepstatin A strongly inhibited the enzyme, with a Ki value of 15 nM at pH 4.0. On the other hand, the active-site residue mutant, in which the putative catalytic aspartic acid residue was mutated to an alanine residue, had no activity. These results show that the Copia proteinase belongs to the family of aspartic proteinases including HIV proteinase. The B-chain of oxidized bovine insulin was hydrolysed at the Leu15-Tyr16 bond fairly selectively. Thus the recombinant Copia proteinase partially resembles HIV proteinase, but is significantly different from it in certain aspects.

Raman spectroscopic study on structure of human immunodeficiency virus (HIV) and hypericin-induced photosensitive damage of HIV

The first Raman spectra of HIV1-HIV2 in human sera and hypericin-induced photosensitive damage of the virus have been obtained. The prominent Raman lines in the spectra are assigned respectively to the carbohydrates of viral glycoprotein, RNA, protein and lipid. The spectra are dominated by Raman scattering of the carbohydrates. The lines of D-Mannose and N-acetylglucosamine in carbohydrates are obvious and there is a beta-configuration in the anomeric C1 position in D-Mannose. The viral RNA duplexes bound assumes an A-form geometry. The lines of backbone phosphate group, bases (involving interbase hydrogen bonding) and ribose of the RNA are complete and distinct. The secondary structure of the viral protein maintains alpha-helix, beta-sheet, beta-turn and random coil. Its side chains are rich and vary from tryptophan, phenylalanine and "buried" tyrosine; the stable conformation of the S-S bond of gauche-gauche-gauche; the two forms of C-S bonds of gauche and trans; to sulfhydrl group and ionized and unionized carboxyl groups. The viral lipid bilayer molecules are probably in the liquid ordered phase or the gel phase. It was observed that the hypericin-induced photosensitive damage of HIV1-HIV2 in human sera changed various components of HIV1-HIV2 in different degrees: The orderly A-form viral RNA would become a disordered viral RNA. There were a breakage of interbase hydrogen bonds and disruption of vertical base-base stacking interactions. In addition, the groups of ribos and four bases were damaged obviously. A decrease in ordered structure (alpha-helix and beta-sheet) of viral protein is accompanied by an increase in random coil. The Tyr buried in the three-dimensional structure of protein was damaged, but it was still "buried" and the damage of C-S bond of trans form was stronger. The groups of carbohydrates, including D-Mannos and N-acetyl glucosamine, in viral envelope glycoprotein had also been changed. The hydrophilic C-N bond of choline in viral lipid was damaged, which was the possible binding site to hypericin, whereas the viral lipids bilayers were still probably in the liquid ordered phase or the gel phase. So the space structure of HIV1-HIV2 was damaged under the experimental conditions, which might block viral infection and inhibit its growth and breeding. It is apparent that the laser Raman spectra have provided certain direct evidence at the molecular level for photosensitive damage of HIV1-HIV2.

Folding Regulates Autoprocessing of HIV-1 Protease Precursor

Autoprocessing of HIV-1 protease (PR) precursors is a crucial step in the generation of the mature protease. Very little is known regarding the molecular mechanism and regulation of this important process in the viral life cycle. In this context we report here the first and complete residue level investigations on the structural and folding characteristics of the 17-kDa precursor TFR-PR-C(nn) (161 residues) of HIV-1 protease. The precursor shows autoprocessing activity indicating that the solution has a certain population of the folded active dimer. Removal of the 5-residue extension, C(nn) at the C-terminal of PR enhanced the activity to some extent. However, NMR structural characterization of the precursor containing a mutation, D25N in the PR at pH 5.2 and 32 degrees C under different conditions of partial and complete denaturation by urea, indicate that the precursor has a high tendency to be unfolded. The major population in the ensemble displays some weak folding propensities in both the TFR and the PR regions, and many of these in the PR region are the non-native type. As both D25N mutant and wild-type PR are known to fold efficiently to the same native dimeric form, we infer that TFR cleavage enables removal of the non-native type of preferences in the PR domain to cause constructive folding of the protein. These results indicate that intrinsic structural and folding preferences in the precursor would have important regulatory roles in the autoprocessing reaction and generation of the mature enzyme.

Human immunodeficiency virus type 1 protease inhibitors block toll-like receptor 2 (TLR2)- and TLR4-Induced NF-kappaB activation

Coinfections with opportunistic and pathogenic bacteria induce human immunodeficiency virus (HIV) replication through microbial antigen activation of NF-kappaB. Here, we assessed whether HIV type 1 protease inhibitors (PI) block microbial antigen activation of NF-kappaB. Human microvessel endothelial cells were transiently transfected with either endothelial cell-leukocyte adhesion molecule NF-kappaB luciferase or interleukin 6 (IL-6) promoter luciferase constructs by using FuGENE 6, and they were treated with PI (nelfinavir, ritonavir, or saquinavir) prior to stimulation with the Toll-like receptor 4 (TLR4) and TLR2 ligands, with lipopolysaccharide (LPS), soluble Mycobacterium tuberculosis factor, or Staphylococcus epidermidis phenol-soluble modulin, respectively, or with tumor necrosis factor alpha (TNF-alpha). Luciferase activity was measured by using a Promega luciferase kit. TNF-alpha release from the supernatant was measured by enzyme-linked immunosorbent assay. Cell death was assessed by lactate dehydrogenase assay. We observed that PI pretreatment blocked the TLR2- and TLR4- as well as the TNF-alpha-mediated NF-kappaB activation, in a dose-dependent manner. PI pretreatment also blocked the LPS-induced IL-6 promoter transactivation and TNF-alpha secretion. These data suggest that PI block HIV replication not only by inhibiting the HIV protease but also by blocking the TLR- and TNF-alpha-mediated NF-kappaB activation and proinflammatory cytokine production. These findings may help explain the immunomodulatory effects of PI, and they suggest an advantage for PI-containing drug regimens in the treatment of HIV-infected patients who are coinfected with opportunistic and pathogenic bacteria.

Rabbit endogenous retrovirus-H encodes a functional protease

Recent studies have revealed that 'human retrovirus-5' sequences found in human samples belong to a rabbit endogenous retrovirus family named RERV-H. A part of the gag-pro region of the RERV-H genome was amplified by PCR from DNA in human samples and several forms of RERV-H protease were expressed in bacteria. The RERV-H protease was able to cleave itself from a precursor protein and was also able to cleave the RERV-H Gag polyprotein precursor in vitro whereas a form of the protease with a mutation engineered into the active site was inactive. Potential N- and C-terminal autocleavage sites were characterized. The RERV-H protease was sensitive to pepstatin A, showing it to be an aspartic protease. Moreover, it was strongly inhibited by PYVPheStaAMT, a pseudopeptide inhibitor specific for Mason-Pfizer monkey virus and avian myeloblastosis-associated virus. A structural model of the RERV-H protease was constructed that, together with the activity data, confirms that this is a retroviral aspartic protease.

An expedient synthesis of N(alpha)-protected-L-tetrahydrofuranylglycine and its application in the synthesis of novel substrate based inhibitors of HIV-1 protease

Z- and Fmoc-L-tetrahydrofuranylglycines have been obtained from L-vinylglycine through dipolar cycloaddition reaction, and its Fmoc derivative has been applied in the synthesis of modified S9 and S10 substrates of HIV-1 protease. These compounds mostly acted as strong inhibitors, rather than substrates, of the protease, probably due to the favourable interactions of the tetrahydrofuranylglycine moiety at the S(2) site.

Interaction of vitronectin with Haemophilus influenzae

Eight strains of Haemophilus influenzae were tested for binding to human vitronectin. All strains adhered to vitronectin-coated glass slides but no binding was detected using soluble vitronectin, suggesting that surface association of vitronectin is a prerequisite. Vitronectin binding was not likely to be mediated by fimbriae as non-fimbriated and fimbriated isogenic strains adhered equally. Adhesion could be blocked by heparin, which is also known to block vitronectin binding to Staphylococcus aureus. However, no blocking was achieved with sialic acid-rich glycoproteins such as fetuin and mucin contrasting with Helicobacter pylori for which sialic acid seems to play an important role. With Streptococcus pneumoniae binding was detected both with soluble and surface-associated vitronectin and could not be blocked by heparin. Our results suggest that H. influenzae, Streptococcus pneumoniae and Helicobacter pylori all use distinct modes to interact with vitronectin.

Development of peptide substrates for trypsin based on monomer/excimer fluorescence of pyrene

An assay using fluorogenic peptides based on the monomer/excimer fluorescence features of pyrene was developed to measure the proteolytic activity of trypsin, a serine protease. Two pyrene moieties were incorporated into the respective N- and C-terminus of the peptides as (pyrene)-C-Xaa-C-(pyrene), where Xaa represents amino acid residues of 5-, 6-, 7-, or 8-mer containing the cleavage site of trypsin. The proteolytic cleavage of the substrates led to an increase in monomer fluorescence and a decrease in excimer fluorescence of pyrene. Kinetic parameters (k(cat) and K(m)) for the enzymatic hydrolysis of the substrates were successfully determined. The parameters are dependent on the chain length of the substrate and optimal catalytic activity was obtained with substrates that consisted of 9 or 10 amino acid residues. The present assay system is sensitive and the preparation of the substrate is very simple. We suggest that this method may be suitable for high-throughput screening and also applicable to the characterization of other proteases.

Soluble expression and purification of porcine pepsinogen from Pichia pastoris

This paper presents a new system for the soluble expression and characterization of porcine pepsinogen from the methylotrophic yeast Pichia pastoris. The cDNA that encodes the zymogenic form of porcine pepsin (EC 3.4.23.1) was cloned into the EcoRI site of the vector pHIL-S1 downstream from the AOX1 alcohol oxidase promoter. After P. pastoris transformation, colonies were screened for expression of pepsinogen based on enzyme activity of the active form, pepsin. The recombinant enzyme was purified 138-fold by anion exchange and affinity column chromatography. Homogeneity was confirmed through SDS-PAGE, Western blot, and N-terminal sequencing. When compared to commercial pepsin, the recombinant pepsin had similar kinetic profiles, pH/temperature stability, and secondary/tertiary conformation. A glycosylated form was also isolated and found to exhibit kinetic and structural characteristics similar to those of the commercial and wild-type pepsin, but was slightly more thermal stable. The above results indicate that the P. pastoris expression system offers a convenient and efficient means to produce and purify a soluble form of pepsin(ogen).

Natural product-based anti-HIV drug discovery and development facilitated by the NCI developmental therapeutics program

During the decade 1987-1996, the Developmental Therapeutics Program (DTP) of the National Cancer Institute (NCI) provided infrastructure support for both intramural and extramural anti-HIV (human immunodeficiency virus) drug discovery research and development. This retrospective review describes some of the anti-HIV lead discovery and development that took place under DTP auspices or which was substantially facilitated by resources made available through the DTP. Examples highlighted include leads identified through the initial screening of pure natural product derived compounds and those derived from bioassay-guided fractionation of crude natural product extracts, and these are classified according to the mechanism of action targeting the critical steps within the replication cycle of HIV.

Targeting the HIV-protease in AIDS therapy: a current clinical perspective

This review deals with clinical applications of compounds that inhibit the action of the protease encoded within the genome of human immunodeficiency virus (HIV). The HIV-protease is essential for viral maturation and represents an important therapeutic target in the fight against AIDS. Following a brief overview of the enzyme structure and function, the article focuses on a number of peptide and non-peptide based HIV-protease inhibitors that are in current clinical use. These drugs are discussed both with respect to their efficacy in treatment of AIDS, and to problems related to insurgence of viral resistance and side effects seen to date in patient populations.

Organization of HIV-1 pol is critical for Pol polyprotein processing

The HIV pol sequentially encodes protease (PR), reverse transcriptase (RT), and integrase (IN) from the 5'-3' direction. We explored the significance of this gene arrangement. All six possible gene dispositions were examined. In two situations where PR was removed from the leading place and no two genes were in their original location, viral polyprotein processing was abolished. Processing of the polyprotein did not occur when IN was translocated to the front of PR-RT. However, in the following two arrangements, the polyprotein was processed but only at specific sites. First, PR remained in the leading position while the locations of RT and IN were exchanged; viral polyprotein was processed at a site between the upstream transframe peptide (TF) and PR. Second, PR was placed after RT-IN and located at the distal end of Pol. Processing occurred only at the created junction between TF and RT. These results indicated that cleavage after TF occurred autocatalytically but did not proceed to a second site, which needed an extraneous PR for trans-action. Therefore, arranging Pol in the order of PR-RT-IN warrants the streamline processing of the polyprotein once the autocleavage is initiated.

Drug resistance mutations can effect dimer stability of HIV-1 protease at neutral pH

The monomer-dimer equilibrium for the human immunodeficiency virus type 1 (HIV-1) protease has been investigated under physiological conditions. Dimer dissociation at pH 7.0 was correlated with a loss in beta-sheet structure and a lower degree of ANS binding. An autolysis-resistant mutant, Q7K/L33I/L63I, was used to facilitate sedimentation equilibrium studies at neutral pH where the wild-type enzyme is typically unstable in the absence of bound inhibitor. The dimer dissociation constant (KD) of the triple mutant was 5.8 microM at pH 7.0 and was below the limit of measurement (approximately 100 nM) at pH 4.5. Similar studies using the catalytically inactive D25N mutant yielded a KD value of 1.0 microM at pH 7.0. These values differ significantly from a previously reported value of 23 nM obtained indirectly from inhibitor binding measurements (Darke et al., 1994). We show that the discrepancy may result from the thermodynamic linkage between the monomer-dimer and inhibitor binding equilibria. Under conditions where a significant degree of monomer is present, both substrates and competitive inhibitors will shift the equilibrium toward the dimer, resulting in apparent increases in dimer stability and decreases in ligand binding affinity. Sedimentation equilibrium studies were also carried out on several drug-resistant HIV-1 protease mutants: V82F, V82F/I84V, V82T/I84V, and L90M. All four mutants exhibited reduced dimer stability relative to the autolysis-resistant mutant at pH 7.0. Our results indicate that reductions in drug affinity may be due to the combined effects of mutations on both dimer stability and inhibitor binding.

Competitive inhibition of human immunodeficiency virus type-1 protease by the Gag-Pol transframe protein

The human immunodeficiency virus type-1 (HIV-1) transframe protein p6* is located between the structural and enzymatic domains of the Gag-Pol polyprotein, flanked by the nucleocapsid (NC) and the protease (PR) domain at its amino and carboxyl termini, respectively. Here, we report that recombinant highly purified HIV-1 p6* specifically inhibits mature HIV-1 PR activity. Kinetic analyses and cross-linking experiments revealed a competitive mechanism for PR inhibition by p6*. We further demonstrate that the four carboxyl-terminal residues of p6* are essential but not sufficient for p6*-mediated inhibition of PR activity. Based on these results, we suggest a role of the transframe protein p6* in regulating HIV-1 PR activity during viral replication.

S' subsite mapping of serine proteases based on fluorescence resonance energy transfer

A microassay based on fluorescence resonance energy transfer has been developed to determine the S' specificity of serine proteases. The protease-catalyzed acyl transfer from a fluorescing acyl donor ester to a P'1/P'2 variable hexapeptide library of nucleophiles labeled with a fluorescence quencher leads to an internally quenched peptide product and a fluorescent hydrolysis product. The amount of fluorescence quenching allows one to draw conclusions about the interaction of the nucleophile at the S' sites of the protease. o-Aminobenzoic acid and 3-nitrotyrosine were used as an efficient donor-acceptor pair for the resonance energy transfer. The P'1/P'2 variable hexapeptide library with the general structure H-Xaa-Ala-Ala-Ala-Tyr(NO2)-Gly-OH and H-Ala-Xaa-Ala-Ala-Tyr(NO2)-Gly-OH, where Xaa represents Arg, Lys, Met, Phe, Ala, Gly, Ser, Gln and Glu, was prepared by solid-phase synthesis. Investigations of the S' specificity of trypsin, chymotrypsin and trypsin variants show that this assay is a fast and sensitive screening method for S' subsite mapping of serine proteases and is suitable for a high throughput screening. The assay might be useful for the development of restriction proteases and the estimation of yields in enzymatic peptide synthesis.

Conserved cysteines of the human immunodeficiency virus type 1 protease are involved in regulation of polyprotein processing and viral maturation of immature virions

We investigated the role of the two highly conserved cysteine residues, cysteines 67 and 95, of the human immunodeficiency virus type 1 (HIV-1) protease in regulating the activity of that protease during viral maturation. To this end, we generated four HIV-1 molecular clones: the wild type, containing both cysteine residues; a protease mutant in which the cysteine at position 67 was replaced by an alanine (C67A); a C95A protease mutant; and a double mutant (C67A C95A). When immature virions were produced in the presence of an HIV-1 protease inhibitor, KNI-272, and the inhibitor was later removed, limited polyprotein processing was observed for wild-type virion preparations over a 20-h period. Treatment of immature wild-type virions with the reducing agent dithiothreitol considerably improved the rate and extent of Gag processing, suggesting that the protease is, in part, reversibly inactivated by oxidation of the cysteine residues. In support of this, C67A C95A virions processed Gag up to fivefold faster than wild-type virions in the absence of a reducing agent. Furthermore, oxidizing agents, such as H2O2 and diamide, inhibited Gag processing of wild-type virions, and this effect was dependent on the presence of cysteine 95. Electron microscopy revealed that a greater percentage of double-mutant virions than wild-type virions developed a mature-like morphology on removal of the inhibitor. These studies provide evidence that under normal culture conditions the cysteines of the HIV-1 protease are susceptible to oxidation during viral maturation, thus preventing immature virions from undergoing complete processing following their release. This is consistent with the cysteines being involved in the regulation of viral maturation in cells under oxidative stress.

Cleavage of the X-Pro peptide bond by pepsin is specific for the trans isomer

Fluorine nuclear magnetic resonance studies of the cleavage of peptides containing a 4-fluorophenylalanine (FPhe)-Pro bond have been performed in order to determine the conformational specificity of FPhe-Pro bond cleavage by pepsin. The peptides selected were substrates of HIV protease or of avian sarcoma virus protease, both of which have been reported to be cleaved specifically at X-Pro by pepsin as well as by the corresponding viral protease enzyme. By working at 0 degrees C, it was possible to separate kinetically cleavage and cis/trans isomerization. For the case of the protease substrate, Ser-Gln-Asn-FPhe-Pro-Ile-Val-Gln, cleavage was shown to be specific for the trans conformation. A value for the rate constant for hydrolysis of the trans peptide divided by the Michaelis constant, ktH/KMtrans = 0.3 min-1 mM-1 was obtained with this substrate, and the Michaelis constant appears to be considerably higher than the substrate concentration, 3.7 mM, used in the study. On a slower time scale, additional cleavages can readily be detected. For the avian leukemia virus protease substrate, Thr-Phe-Gln-Ala-FPhe-Pro-Leu-Arg-Glu-Ala, the cleavage was both slower and less specific. In addition to the primary cleavage at the FPhe-Pro site, cleavage also occurs at the Ala-FPhe bond on a somewhat slower time scale. In addition to the conformational specificity of the cleavage reaction, these results indicate that pepsin is a better model for HIV protease than for avian leukemia virus protease.

Crystal structures of the inactive D30N mutant of feline immunodeficiency virus protease complexed with a substrate and an inhibitor

Crystal structures of complexes of a D30N mutant of feline immunodeficiency virus protease (FIV PR) complexed with a statine-based inhibitor (LP-149), as well as with a substrate based on a modification of this inhibitor (LP-149S), have been solved and refined at resolutions of 2.0 and 1.85 A, respectively. Both the inhibitor and the substrate are bound in the active site of the mutant protease in a similar mode, which also resembles the mode of binding of LP-149 to the native protease. The carbonyl oxygen of the scissile bond in the substrate is not hydrated and is located within the distance of a hydrogen bond to an amido nitrogen atom from one of the two asparagines in the active site of the enzyme. The nitrogen atom of the scissile bond is 3.25 A from the conserved water molecule (Wat301). A model of a tetrahedral intermediate bound to the active site of the native enzyme was built by considering the interactions observed in all three crystal structures of FIV PR. Molecular dynamics simulations of this model bound to native wild-type FIV PR were carried out, to investigate the final stages of the catalytic mechanism of aspartic proteases.

HIV protease substrate conformation: modulation by cyclophilin A

Cyclophilin A (CyPA), a cytosolic peptidyl-prolyl trans-cis isomerase can accelerate the trans-cis isomerization of Xxx-Pro peptide bonds. One- and two-dimensional 1H-NMR spectroscopy were used to determine that the heptapeptide Ser-Gln-Asn-Tyr-Pro-Ile-Val, a model peptide of an HIV-1 protease cleavage site in the gag polyprotein of HIV-1, is a substrate for CyPA. Experiments revealed a slow exchange about the Tyr-Pro peptide bond with 30 +/- 5% in the cis conformation (pH 1-9). While the interconversion rate is too slow to measure by kinetic NMR methods in the absence of CyPA, these methods, saturation transfer and NOE experiments, established that CyPA enhanced the rate of trans-cis interconversion, a process inhibited by cyclosporin A (CsA). With a substrate:CyPA ratio of 40:1, an interconversion rate of 2.5 s(-1) at 25 degrees C was observed.

Development and standardization of an immuno-quantified solid phase assay for HIV-1 aspartyl protease activity and its application to the evaluation of inhibitors

The catELISA technique was modified and standardized for measuring HIV-1 aspartyl protease activity and evaluating the potency of synthetic peptide inhibitors. This immuno-quantified solid phase assay combines the use of an immobilized C-terminal biotinylated peptide as substrate, a crude enzyme preparation, and a highly specific antiserum elicited against the C-terminal product of the enzyme reaction. A standard curve of this C-terminal product was constructed to determine the enzyme activity. This assay, which requires less enzyme and substrate, is more sensitive than the conventional HPLC method. The amounts of C-terminal peptide produced in solution as determined from ELISA and HPLC standard curves were comparable. Analogues of peptidomimetics designed in our laboratory were assayed for their potency to inhibit the enzyme. One of them, H4, which is a hydroxyethylamine isostere of the Phe-Pro peptide bond, was a powerful inhibitor.

Solution structure of the HIV protease inhibitor acetyl-pepstatin as determined by NMR and molecular modeling

The structure of acetyl-pepstatin has been investigated in solution by two-dimensional NMR spectroscopy and molecular modeling. The analysis of DQFCOSY, TOCSY and NOESY spectra lead to a full assignment of the -NMR signals both in DMSO-d6 and in TFE-d3:H2O 1:1. Interproton distances, dihedral angles and exchanger regimes of NH or OH protons were derived from ROESY connectivities, coupling constants and temperature dependences of the chemical shifts, respectively. Molecular modeling using the NMR distance and dihedral angle constraints obtained in DMSO-d6 yielded a model showing a well-defined structure for the N-terminal segment Ac-1 to Sta-4, but a flexible structure for the C-terminal segment. The structure was less defined in TFE-d3:H2O 1:1 and 13C T1 measurements are indicative of higher mobility. Comparison of the NMR-determined solution structure of acetyl-pepstatin with its crystal structure when bound to HIV-1 protease shows that the conformation is more extended in the complex as a result of intermolecular interactions.

Potent inhibition of HIV type 1 infection of mononuclear phagocytes by synthetic peptide analogs of HIV type 1 protease substrates

The HIV-1 genome encodes a protease that is required for viral processing of the precursor polyproteins Pr55gag and Pr160gag-pol. Interference with this process in human lymphocytes inhibits production of infectious virus. We tested the ability of several protease inhibitors to decrease replication of HIV-1BaL in human monocytes and peritoneal macrophages. The compounds tested are oligopeptide analogs of HIV-1 protease substrates in which the scissile dipeptide has been replaced by a hydroxyethylene isostere. The protease inhibitors were added only once, 1 hr prior to inoculation with virus. Every 3-5 days, half the medium was replaced with fresh medium. Inhibition of virus production was assessed by measuring reverse transcriptase (RT) activity in supernatant medium 14 days after infection. The concentration of drug required to inhibit infection by 50% (IC50) in monocytes ranged from 0.17 to 2.99 microM; IC50 values for peritoneal macrophages ranged from 0.21 to 1.9 microM. The IC50 values for these compounds were 1.1- to 10-fold higher when tested in monocytes compared to their inhibitory effect in lymphocytes, although still potently effective in the dosage range that appeared nontoxic to cells. Cell toxicity was seen only at concentrations greater than 10 microM, and varied among the drugs tested. Immunoblot analysis of two of the drugs (SB205700 and SB108922) confirmed inhibition of polyprotein processing. In control cells, 22% of viral protein pr55 was processed to p24 by 24 hr, and 51% was processed by 48 hr. In cells treated with the protease inhibitors (2 microM), Pr55 processing was inhibited 77% at 24 hr and 89% at 48 hr. Thus, these synthetic peptide analogs potently inhibit productive infection of mononuclear phagocytes by HIV-1. Drugs of this class may be useful for the treatment of HIV-1 infection in humans.