The quaternary structure of streptavidin in urea

High-Precision Viral Detection Using Electrochemical Kinetic Profiling of Aptamer-Antigen Recognition in Clinical Samples and Machine Learning

High-precision viral detection at point of need with clinical samples plays a pivotal role in the diagnosis of infectious diseases and the control of a global pandemic. However, the complexity of clinical samples that often contain very low viral concentrations makes it a huge challenge to develop simple diagnostic devices that do not require any sample processing and yet are capable of meeting performance metrics such as very high sensitivity and specificity. Herein we describe a new single-pot and single-step electrochemical method that uses real-time kinetic profiling of the interaction between a high-affinity aptamer and an antigen on a viral surface. This method generates many data points per sample, which when combined with machine learning, can deliver highly accurate test results in a short testing time. We demonstrate this concept using both SARS-CoV-2 and Influenza A viruses as model viruses with specifically engineered high-affinity aptamers. Utilizing this technique to diagnose COVID-19 with 37 real human saliva samples results in a sensitivity and specificity of both 100 % (27 true negatives and 10 true positives, with 0 false negative and 0 false positive), which showcases the superb diagnostic precision of this method.

Avidin cooperative allosterism upon binding biotin observed by differential changes in intrinsic fluorescence

Similar to streptavidin, the binding of biotin by avidin does not appear to be cooperative in the traditional sense of altered binding strength, though it appears to be cooperative in terms of ligand induced structural communication across subunits in the protein as previously shown for streptavidin. In this work we provide data from intrinsic tryptophan fluorescence as evidence of a cooperative structural change. The technique involves examination of the changes in fluorescence emission corresponding to the various tryptophan populations accompanying avidin-biotin binding. We note that the 335 nm emission population (i.e. more hydrophobic local environment) saturates prior to full ligation and the saturation of the 350 nm emission population commonly used in standard binding activity assays. We also note that total integrated fluorescence emission and peak height during the titration of ligand into streptavidin also reach saturation prior to the 4:1 stoichiometric end point. Unique to avidin and distinct from the behavior of streptavidin described in our prior work, the wavelength of maximum emission and full width at half maximum (FWHM) data do not saturate prior to the 4:1 stoichiometric end point. Avidin also exhibited larger FWHM for both apo and holo forms suggesting greater heterogeneity in local tryptophan environments, as compared to streptavidin. Taken together, the data suggests that the binding of the first 3 biotins effect greater structural changes in the protein than the final ligand in a similar way for avidin and streptavidin.

Self-assembly of a dimeric avidin into unique higher-order oligomers

The dimeric avidin family has been expanded in recent years to include many new members. All of them lack the intermonomeric Trp that plays a critical role in biotin-binding. Nevertheless, these new members of the avidins maintain the high affinity towards biotin. Additionally, all of the dimeric avidins share a very unique property: namely, the cylindrical oligomerization in the crystal structure. The newest member described here, agroavidin from the agrobacterium, Rhizobium sp. AAP43, shares their important structural features. However, the affinity of agroavidin towards biotin is lower than all other members of the avidin family, due to the presence of phenylalanine instead of a conserved tyrosine in the biotin-binding site. Mutating this phenylalanine into tyrosine regenerated the high affinity, which emphasizes the importance of this particular tyrosine residue. Another unique feature that distinguishes agroavidin from the other dimeric avidins is that it does not produce oligomers in its crystal structure. In order to understand the factors that promote oligomerization in dimeric avidins, we exchanged the C-terminal region of agroavidin with that of hoefavidin that produced octamers. This exchange resulted in a decamer rather than an octamer. This unusual outcome demonstrates the impact of the C-terminal region on the ability to produce oligomers. The decameric assembly of agroavidin expands the avidin-biotin toolbox even further and could well pave the path into new biotin-based technologies. Moreover, uncovering the factors that induce dimeric avidins into oligomeric assemblies may aid in better understanding the general molecular determinants that promote oligomerization.

Proximity-dependent biotin labeling in testicular germ cells identified TESMIN-associated proteins

Characterization of protein-protein interactions (PPI) is a key to understanding the functions of proteins of interest. Recently developed proximity-dependent biotin identification (BioID) has been actively investigated as an alternative PPI mapping method because of its usefulness in uncovering transient PPI. Here, as an example of proximity labeling proteomics application in the testis, we generated two transgenic mouse lines expressing two biotin ligases (BioID2 or TurboID) fused with TESMIN, which translocates from the cytosol to the nucleus during meiotic progression and is required for reproduction. The BioID2 transgene, albeit not the TurboID transgene, rescued fertility defects of the Tesmin KO male mice, indicating that the TESMIN-BioID2 fusion can physiologically replace TESMIN. Furthermore, biotinylated protein pull-down and affinity-purification followed by mass spectrometry using the TESMIN-BioID2 transgenic mice captured components of the MYBL1-MuvB complex that regulate cell-cycle gene expression. Thus, our study shows that proximity labeling proteomics can be applied in male germ cells, although the choice of biotin ligase needs to be carefully tested.

Non-Covalently Associated Streptavidin Multi-Arm Nanohubs Exhibit Mechanical and Thermal Stability in Cross-Linked Protein-Network Materials

Constructing protein-network materials that exhibit physicochemical and mechanical properties of individual protein constituents requires molecular cross-linkers with specificity and stability. A well-known example involves specific chemical fusion of a four-arm polyethylene glycol (tetra-PEG) to desired proteins with secondary cross-linkers. However, it is necessary to investigate tetra-PEG-like biomolecular cross-linkers that are genetically fused to the proteins, simplifying synthesis by removing additional conjugation and purification steps. Non-covalently, self-associating, streptavidin homotetramer is a viable, biomolecular alternative to tetra-PEG. Here, a multi-arm streptavidin design is characterized as a protein-network material platform using various secondary, biomolecular cross-linkers, such as high-affinity physical (i.e., non-covalent), transient physical, spontaneous chemical (i.e., covalent), or stimuli-induced chemical cross-linkers. Stimuli-induced, chemical cross-linkers fused to multi-arm streptavidin nanohubs provide sufficient diffusion prior to initiating permanent covalent bonds, allowing proper characterization of streptavidin nanohubs. Surprisingly, non-covalently associated streptavidin nanohubs exhibit extreme stability, which translates into material properties that resemble hydrogels formed by chemical bonds even at high temperatures. Therefore, this study not only establishes that the streptavidin nanohub is an ideal multi-arm biopolymer precursor but also provides valuable guidance for designing self-assembling nanostructured molecular networks that can properly harness the extraordinary properties of protein-based building blocks.

Mapping shifts in nanopore signal to changes in protein and protein-DNA conformation

Solid-state nanopores have been used extensively in biomolecular studies involving DNA and proteins. However, the interpretation of signals generated by the translocation of proteins or protein-DNA complexes remains challenging. Here, we investigate the behavior of monovalent streptavidin and the complex it forms with short biotinylated DNA over a range of nanopore sizes, salts, and voltages. We describe a simple geometric model that is broadly applicable and employ it to explain observed variations in conductance blockage and dwell time with experimental conditions. The general approach developed here underscores the value of nanopore-based protein analysis and represents progress toward the interpretation of complex translocation signals.

Endoplasmic reticulum stress causes insulin resistance by inhibiting delivery of newly synthesized insulin receptors to the cell surface

Accumulation of unfolded proteins in the endoplasmic reticulum (ER) causes ER stress and activates a signaling network known as the unfolded protein response (UPR). Here we characterize how ER stress and the UPR inhibit insulin signaling. We find that ER stress inhibits insulin signaling by depleting the cell surface population of the insulin receptor. ER stress inhibits proteolytic maturation of insulin proreceptors by interfering with transport of newly synthesized insulin proreceptors from the ER to the plasma membrane. Activation of AKT, a major target of the insulin signaling pathway, by a cytosolic, membrane-bound chimera between the AP20187-inducible FV2E dimerization domain and the cytosolic protein tyrosine kinase domain of the insulin receptor was not affected by ER stress. Hence, signaling events in the UPR, such as activation of the JNK mitogen-activated protein (MAP) kinases or the pseudokinase TRB3 by the ER stress sensors IRE1α and PERK, do not contribute to inhibition of signal transduction in the insulin signaling pathway. Indeed, pharmacologic inhibition and genetic ablation of JNKs, as well as silencing of expression of TRB3, did not restore insulin sensitivity or rescue processing of newly synthesized insulin receptors in ER-stressed cells. [Media: see text].

Real-time monitoring of PARP1-dependent PARylation by ATR-FTIR spectroscopy

Poly-ADP-ribosylation (PARylation) is a fully reversible post-translational modification with key roles in cellular physiology. Due to the multi-domain structure of poly(ADP-ribose) polymerase-1 (PARP1) and the highly dynamic nature of the PARylation reaction, studies on the biochemical mechanism and structural dynamics remain challenging. Here, we report label-free, time-resolved monitoring of PARP1-dependent PARylation using ATR-FTIR spectroscopy. This includes PARP1 activation by binding to DNA strand break models, NAD⁺ substrate binding, PAR formation, and dissociation of automodified PARP1 from DNA. Analyses of PARP1 activation at different DNA models demonstrate a strong positive correlation of PARylation and PARP1 dissociation, with the strongest effects observed for DNA nicks and 3’ phosphorylated ends. Moreover, by examining dynamic structural changes of PARP1, we reveal changes in the secondary structure of PARP1 induced by NAD⁺ and PARP inhibitor binding. In summary, this approach enables holistic and dynamic insights into PARP1-dependent PARylation with molecular and temporal resolution.

The mechanism of PARP1-dependent poly-ADP-ribosylation in response to DNA damage is still under debate. Here, the authors use ATR-FTIR spectroscopy to provide time-resolved insights into the molecular details of this process under near physiological conditions.

Proteomics Approaches for Biomarker and Drug Target Discovery in ALS and FTD

Neurodegenerative disorders such as amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) are increasing in prevalence but lack targeted therapeutics. Although the pathological mechanisms behind these diseases remain unclear, both ALS and FTD are characterized pathologically by aberrant protein aggregation and inclusion formation within neurons, which correlates with neurodegeneration. Notably, aggregation of several key proteins, including TAR DNA binding protein of 43 kDa (TDP-43), superoxide dismutase 1 (SOD1), and tau, have been implicated in these diseases. Proteomics methods are being increasingly applied to better understand disease-related mechanisms and to identify biomarkers of disease, using model systems as well as human samples. Proteomics-based approaches offer unbiased, high-throughput, and quantitative results with numerous applications for investigating proteins of interest. Here, we review recent advances in the understanding of ALS and FTD pathophysiology obtained using proteomics approaches, and we assess technical and experimental limitations. We compare findings from various mass spectrometry (MS) approaches including quantitative proteomics methods such as stable isotope labeling by amino acids in cell culture (SILAC) and tandem mass tagging (TMT) to approaches such as label-free quantitation (LFQ) and sequential windowed acquisition of all theoretical fragment ion mass spectra (SWATH-MS) in studies of ALS and FTD. Similarly, we describe disease-related protein-protein interaction (PPI) studies using approaches including immunoprecipitation mass spectrometry (IP-MS) and proximity-dependent biotin identification (BioID) and discuss future application of new techniques including proximity-dependent ascorbic acid peroxidase labeling (APEX), and biotinylation by antibody recognition (BAR). Furthermore, we explore the use of MS to detect post-translational modifications (PTMs), such as ubiquitination and phosphorylation, of disease-relevant proteins in ALS and FTD. We also discuss upstream technologies that enable enrichment of proteins of interest, highlighting the contributions of new techniques to isolate disease-relevant protein inclusions including flow cytometric analysis of inclusions and trafficking (FloIT). These recently developed approaches, as well as related advances yet to be applied to studies of these neurodegenerative diseases, offer numerous opportunities for discovery of potential therapeutic targets and biomarkers for ALS and FTD.

Real-Time Monitoring of Biotinylated Molecules Detection Dynamics in Nanoporous Anodic Alumina for Bio-Sensing

The chemical modification, or functionalization, of the surfaces of nanomaterials is a key step to achieve biosensors with the best sensitivity and selectivity. The surface modification of biosensors usually comprises several modification steps that have to be optimized. Real-time monitoring of all the reactions taking place during such modification steps can be a highly helpful tool for optimization. In this work, we propose nanoporous anodic alumina (NAA) functionalized with the streptavidin-biotin complex as a platform towards label-free biosensors. Using reflective interferometric spectroscopy (RIfS), the streptavidin-biotin complex formation, using biotinylated thrombin as a molecule model, was monitored in real-time. The study compared the performance of different NAA pore sizes in order to achieve the highest response. Furthermore, the optimal streptavidin concentration that enabled the efficient detection of the biotinylated thrombin attachment was estimated. Finally, the ability of the NAA-RIfS system to quantify the concentration of biotinylated thrombin was evaluated. This study provides an optimized characterization method to monitor the chemical reactions that take place during the biotinylated molecules attachment within the NAA pores.

Streptavidin cooperative allosterism upon binding biotin observed by differential changes in intrinsic fluorescence

While the binding of biotin by streptavidin does not appear to be cooperative in the traditional sense of altered binding strength, it has been suggested that it may be cooperative in terms of differential structural changes in the protein. In this work we present intrinsic tryptophan fluorescence data as evidence of a cooperative structural change. The technique involves examination of the differences in fluorescence emission corresponding to distinct tryptophan populations accompanying protein-ligand binding. Specifically we note that the 335 nm emission population (i.e. more hydrophobic) saturates prior to the saturation of the 350 nm emission population commonly used in the standard binding activity assay. We also note that the wavelength of maximum emission, total integrated fluorescence emission and full width at half maximum during the titration of ligand into streptavidin also reach saturation before the expected 4:1 stoichiometric end point. This suggests that the binding of the first 3 biotins effect greater structural changes in the protein than the final ligand.

Probing fibronectin conformation on a protein corona layer around nanoparticles

Protein unfolding induced by nanoparticles (NPs) can lead to exposure of cryptic epitopes that might dictate biological identity and affect NP biological fate (e.g., blood circulation time, biodistribution, and tumor accumulation). Here, we monitor the conformation of fluorescence resonance energy transfer (FRET)-labelled fibronectin (FN) on corona-coated gold NPs. We found that the labelled FN proteins, which directly accessed the gold NP surface, underwent more pronounced conformational changes than those associated with the protein corona via protein-protein interactions. FRET and liquid chromatography-mass spectrometry analyses demonstrated that NP size/concentration, pH change, and the level of surface coverage by the corona can tune the accessibility of labelled FN to the gold NP surface. Although some subsequently adsorbing proteins accessed the NP surface thanks to incomplete surface coverage and protein exchange (the Vroman effect), most outer-layer proteins could not directly bind to the NP surface, blocked by pre-adsorbed corona layers. This finding was also partially confirmed by isothermal titration calorimetry (ITC) analysis. These results suggest the proof-of-concept that outermost-layer proteins with modestly changed conformation rather than unfolded proteins at the gold NP surface effectively create the NPs' biological identity, which might have important implications on biological fates of gold NPs.

A novel approach to make homogeneous protease-stable monovalent streptavidin

The interaction between the tetramer streptavidin and biotin is recognized as one of the strongest non-covalent associations. Owing to the tight and specific binding, the streptavidin-biotin system has been used widely for bimolecular labeling, purification, immobilization, and even for targeted delivery of therapeutics drugs. Here, we report a novel approach to make homogeneous monovalent tetramer streptavidin. The purified monovalent protein showed both thermal stability and protease stability. Unexpectedly, we found that two proteases, Proteinase K (PK) and Subtilisin (SU), can efficiently remove the His8-tag from the wild-type subunit without affecting the tetramer architecture of monovalent streptavidin, thus making it more homogeneous. In addition, crystallization was performed to assure the homogeneity of the monovalent protein prepared. Overall, monovalent streptavidin shows increased homogeneity and will likely be valuable for many future applications in a wide range of research areas.

Using sm-FRET and denaturants to reveal folding landscapes

RNA folding studies aim to clarify the relationship among sequence, tridimensional structure, and biological function. In the last decade, the application of single-molecule fluorescence resonance energy transfer (sm-FRET) techniques to investigate RNA structure and folding has revealed the details of conformational changes and timescale of the process leading to the formation of biologically active RNA structures with subnanometer resolution on millisecond timescales. In this review, we initially summarize the first wave of single-molecule FRET-based RNA techniques that focused on analyzing the influence of mono- and divalent metal ions on RNA function, and how these studies have provided very valuable information about folding pathways and the presence of intermediate and low-populated states. Next, we describe a second generation of single-molecule techniques that combine sm-FRET with the use of chemical denaturants as an emerging powerful approach to reveal information about the dynamics and energetics of RNA folding that remains hidden using conventional sm-FRET approaches. The main advantages of using the competing interplay between folding agents such as metal ions and denaturants to observe and manipulate the dynamics of RNA folding and RNA-ligand interactions is discussed in the context of the adenine riboswitch aptamer.

Direct observation of multimer stabilization in the mechanical unfolding pathway of a protein undergoing oligomerization

Understanding how protein oligomerization affects the stability of monomers in self-assembled structures is crucial to the development of new protein-based nanomaterials and protein cages for drug delivery. Here, we use single-molecule force spectroscopy (AFM-SMFS), protein engineering, and computer simulations to evaluate how dimerization and tetramerization affects the stability of the monomer of Streptavidin, a model homotetrameric protein. The unfolding force directly relates to the folding stability, and we find that monomer of Streptavidin is mechanically stabilized by 40% upon dimerization, and that it is stabilized an additional 24% upon tetramerization. We also find that biotin binding increases stability by another 50% as compared to the apo-tetrameric form. We used the distribution of unfolding forces to extract properties of the underlying energy landscape and found that the distance to the transition state is decreased and the barrier height is increased upon multimerization. Finally, we investigated the origin of the strengthening by ligand binding. We found that, rather than being strengthened through intramolecular contacts, it is strengthened due to the contacts provided by the biotin-binding loop that crosses the interface between the dimers.

Secretory production of tetrameric native full-length streptavidin with thermostability using Streptomyces lividans as a host

Background

Streptavidin is a tetrameric protein derived from Streptomyces avidinii, and has tight and specific biotin binding affinity. Applications of the streptavidin-biotin system have been widely studied. Streptavidin is generally produced using protein expression in Escherichia coli. In the present study, the secretory production of streptavidin was carried out using Streptomyces lividans as a host.

Results

In this study, we used the gene encoding native full-length streptavidin, whereas the core region is generally used for streptavidin production in E. coli. Tetrameric streptavidin composed of native full-length streptavidin monomers was successfully secreted in the culture supernatant of S. lividans transformants, and had specific biotin binding affinity as strong as streptavidin produced by E. coli. The amount of Sav using S. lividans was about 9 times higher than using E. coli. Surprisingly, streptavidin produced by S. lividans exhibited affinity to biotin after boiling, despite the fact that tetrameric streptavidin is known to lose its biotin binding ability after brief boiling.

Conclusion

We successfully produced a large amount of tetrameric streptavidin as a secretory-form protein with unique thermotolerance.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-014-0188-y) contains supplementary material, which is available to authorized users.

Paraquat exposure and Sod2 knockdown have dissimilar impacts on the Drosophila melanogaster carbonylated protein proteome

Exposure to Paraquat and RNA interference knockdown of mitochondrial superoxide dismutase (Sod2) are known to result in significant lifespan reduction, locomotor dysfunction, and mitochondrial degeneration in Drosophila melanogaster. Both perturbations increase the flux of the progenitor ROS, superoxide, but the molecular underpinnings of the resulting phenotypes are poorly understood. Improved understanding of such processes could lead to advances in the treatment of numerous age-related disorders. Superoxide toxicity can act through protein carbonylation. Analysis of carbonylated proteins is attractive since carbonyl groups are not present in the 20 canonical amino acids and are amenable to labeling and enrichment strategies. Here, carbonylated proteins were labeled with biotin hydrazide and enriched on streptavidin beads. On-bead digestion was used to release carbonylated protein peptides, with relative abundance ratios versus controls obtained using the iTRAQ MS-based proteomics approach. Western blotting and biotin quantitation assay approaches were also investigated. By both Western blotting and proteomics, Paraquat exposure, but not Sod2 knockdown, resulted in increased carbonylated protein relative abundance. For Paraquat exposure versus control, the median carbonylated protein relative abundance ratio (1.53) determined using MS-based proteomics was in good agreement with that obtained using a commercial biotin quantitation kit (1.36).

Single-molecule chemical denaturation of riboswitches

To date, single-molecule RNA science has been developed almost exclusively around the effect of metal ions as folding promoters and stabilizers of the RNA structure. Here, we introduce a novel strategy that combines single-molecule Förster resonance energy transfer (FRET) and chemical denaturation to observe and manipulate RNA dynamics. We demonstrate that the competing interplay between metal ions and denaturant agents provides a platform to extract information that otherwise will remain hidden with current methods. Using the adenine-sensing riboswitch aptamer as a model, we provide strong evidence for a rate-limiting folding step of the aptamer domain being modulated through ligand binding, a feature that is important for regulation of the controlled gene. In the absence of ligand, the rate-determining step is dominated by the formation of long-range key tertiary contacts between peripheral stem-loop elements. In contrast, when the adenine ligand interacts with partially folded messenger RNAs, the aptamer requires specifically bound Mg²⁺ ions, as those observed in the crystal structure, to progress further towards the native form. Moreover, despite that the ligand-free and ligand-bound states are indistinguishable by FRET, their different stability against urea-induced denaturation allowed us to discriminate them, even when they coexist within a single FRET trajectory; a feature not accessible by existing methods.

Mutations for decreasing the immunogenicity and maintaining the function of core streptavidin

The defining property of core streptavidin (cSA) is not only its high binding affinity for biotin but also its pronounced thermal and chemical stability. Although potential applications of these properties including therapeutic methods have prompted much biological research, the high immunogenicity of this bacterial protein is a key obstacle to its clinical use. To this end, we have successfully constructed hypoimmunogenic cSA muteins in a previous report. However, the effects of these mutations on the physicochemical properties of muteins were still unclear. These mutations retained the similar electrostatic charges to those of wild-type (WT) cSA, and functional moieties with similar hydrogen bond pattern. Herein, we performed isothermal titration calorimetry, differential scanning calorimetry, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis to gain insight into the physicochemical properties and functions of these modified versions of cSA. The results indicated that the hypoimmunogenic muteins retained the biotin-binding function and the tetramer structure of WT cSA. In addition, we discuss the potential mechanisms underlying the success of these mutations in achieving both immune evasion and retention of function; these mechanisms might be incorporated into a new strategy for constructing hypoimmunogenic proteins.

Amplified surface plasmon resonance immunosensor for interferon-gamma based on a streptavidin-incorporated aptamer

Interferon-gamma (IFN-γ) is associated with susceptibility to tuberculosis, which is a major public health problem worldwide. Although significant progress has been made with regard to the design of enzyme immunoassays for IFN-γ, this assay is still labor-intensive and time-consuming. We therefore designed a DNA aptamer hairpin structure for the detection of IFN-γ with high sensitivity and selectivity. A streptavidin DNA aptamer was incorporated into the IFN-γ binding aptamer probe for the amplified detection of the target molecules. Initially, the probe remained in the inactive configuration. The addition of IFN-γ induced the rearrangement of the aptamer structure, allowing the self-assembly of the active streptavidin aptamer conformation for the streptavidin molecular recognition. Under optimized conditions, the detection limit was determined to be 33 pM, with a dynamic range from 0.3 to 333 nM, both of which were superior to those of corresponding optical sensors. Because combined aptamers are composed of nucleic acids, this optical aptasensor provided the advantages of high sensitivity, simplicity, reusability, and no further labeling or sample pre-treatment.

Structural adaptation of a thermostable biotin-binding protein in a psychrophilic environment

Shwanavidin is an avidin-like protein from the marine proteobactrium Shewanella denitrificans, which exhibits an innate dimeric structure while maintaining high affinity toward biotin. A unique residue (Phe-43) from the L3,4 loop and a distinctive disulfide bridge were shown to account for the high affinity toward biotin. Phe-43 emulates the function and position of the critical intermonomeric Trp that characterizes the tetrameric avidins but is lacking in shwanavidin. The 18 copies of the apo-monomer revealed distinctive snapshots of L3,4 and Phe-43, providing rare insight into loop flexibility, binding site accessibility, and psychrophilic adaptation. Nevertheless, as in all avidins, shwanavidin also displays high thermostability properties. The unique features of shwanavidin may provide a platform for the design of a long sought after monovalent form of avidin, which would be ideal for novel types of biotechnological application.

Proteomic analysis of the androgen receptor via MS-compatible purification of biotinylated protein on streptavidin resin

The strength of the streptavidin/biotin interaction poses challenges for the recovery of biotinylated molecules from streptavidin resins. As an alternative to high-temperature elution in urea-containing buffers, we show that mono-biotinylated proteins can be released with relatively gentle heating in the presence of biotin and 2% SDS/Rapigest, avoiding protein carbamylation and minimizing streptavidin dissociation. We demonstrate the utility of this mild elution strategy in two studies of the human androgen receptor (AR). In the first, in which formaldehyde cross-linked complexes are analyzed in yeast, a mass spectrometry-based comparison of the AR complex using SILAC reveals an association between the androgen-activated AR and the Hsp90 chaperonin, while Hsp70 chaperonins associate specifically with the unliganded complex. In the second study, the endogenous AR is quantified in the LNCaP cell line by absolute SILAC and MRM-MS showing approximately 127,000 AR copies per cell, substantially more than previously measured using radioligand binding.

Multiplexed protease assays using element-tagged substrates

Inductively coupled plasma-mass spectrometry (ICP-MS)-based assays lend themselves to multiplexing due to the high resolution between mass channels, the sensitivity, and the reliability of the technique. Here the potential of ICP-MS-based protease assays is demonstrated with a quadruplex assay of cysteine proteases and metalloproteases. Four orthogonal peptide substrates were synthesized for the proteases calpain-1, caspase-3, matrix metalloprotease-9 (MMP-9), and a disintegrin and metalloprotease-10 (ADAM10). Each substrate carries a biotin tag at the C terminus and a diethylenetriaminepentaacetic acid (DTPA)-based lanthanide complex at the N terminus. The results demonstrate that this is a simple and reproducible analysis technique with excellent correlation between the single and multiplex assay formats.

Challenging semi-bootstrapping molecular-replacement strategy reveals intriguing crystal packing of rhizavidin

The structure of rhizavidin, the first dimeric member of the avidin family which maintains high affinity towards biotin, was determined to high resolution by SeMet SAD. Consequently, the structure of the rhizavidin-biotin complex was determined by molecular-replacement methods using the apo structure as the search model; this ran into complications and required combined programs as well as bootstrapping approaches. Although present as a dimer in solution, rhizavidin packs as unique oligomers in both crystal forms. The novel insights derived from the unique molecular-replacement procedure and the crystal-driven oligomeric forms in this work may have utililty in biotechological and nanotechnological applications.

Development of inductively coupled plasma-mass spectrometry-based protease assays

Rapid, sensitive, and quantitative assays for proteases are important for drug development and in the diagnosis of disease. Here an assay for protease activity that uses inductively coupled plasma-mass spectrometry (ICP-MS) detection is described. Peptidic alpha-chymotrypsin substrates were synthesized containing a lanthanide ion chelate at the N terminus to provide a distinct elemental tag. A biotin label was appended to the C terminus of the peptide, allowing separation of uncleaved peptide from the enzymatic digestion. The enzyme activity was determined by quantifying the lanthanide ion signal of the peptide cleavage products by ICP-MS. Biotinylated substrates synthesized include Lu-DTPA-Asp-Leu-Leu-Val-Tyr approximately Asp-Lys(biotin) and Lu-DTPA-betaAla-betaAla-betaAla-betaAla-Gly-Ser-Ala-Tyr approximately Gly-Lys-Arg-Lys(biotin)-amide. Parallel assays with a commercially available fluorogenic substrate (Suc-AAPF-AMC) for alpha-chymotrypsin were performed for comparison. Using the ICP-MS assay, enzyme concentrations as low as 2pM could be readily detected, superior to the detection limit of an assay using the alpha-chymotrypsin fluorogenic substrate (Suc-AAPF-AMC). Furthermore, we demonstrated the use of this approach to detect chymotrypsin activity in HeLa cell lysates.

Vulnerability in Popular Molecular Dynamics Packages Concerning Langevin and Andersen Dynamics

We report a serious problem associated with a number of current implementations of Andersen and Langevin dynamics algorithms. When long simulations are run in many segments, it is sometimes possible to have a repeating sequence of pseudorandom numbers enter the calcuation. We show that, if the sequence repeats rapidly, the resulting artifacts can quickly denature biomolecules and are then easily detectable. However, if the sequence repeats less frequently, the artifacts become subtle and easily overlooked. We derive a formula for the underlying cause of artifacts in the case of the Langevin thermostat, and find it vanishes slowly as the inverse square root of the number of time steps per simulation segment. Numerous examples of simulation artifacts are presented, including dissociation of a tetrameric protein after 110 ns of dynamics, reductions in atomic fluctuations for a small protein in implicit solvent, altered thermodynamic properties of a box of water molecules, and changes in the transition free energies between dihedral angle conformations. Finally, in the case of strong thermocoupling, we link the observed artifacts to previous work in nonlinear dynamics and show that it is possible to drive a 20-residue, implicitly solvated protein into periodic trajectories if the thermostat is not used properly. Our findings should help other investigators re-evaluate simulations that may have been corrupted and obtain more accurate results.

Designed evolution of artificial metalloenzymes: protein catalysts made to order

Artificial metalloenzymes based on biotin-streptavidin technology, a "fusion" of chemistry and biology, illustrate how asymmetric catalysts can be improved and evolved using chemogenetic approaches.

Factors Dictating the Pseudocatalytic Efficiency of Avidins

The hydrolysis of biotinyl p-nitrophenyl ester (BNP) by a series of avidin derivatives was examined. Surprisingly, a hyperthermostable avidin-related protein (AVR4) was shown to display extraordinary yet puzzling hydrolytic activity. In order to evaluate the molecular determinants that contribute to the reaction, the crystal structure of AVR4 was compared with those of avidin, streptavidin and key mutants of the two proteins in complex with biotinyl p-nitroanilide (BNA), the inert amide analogue of BNP. The structures revealed that a critical lysine residue contributes to the hydrolysis of BNP by avidin but has only a minor contribution to the AVR4-mediated reaction. Indeed, the respective rates of hydrolysis among the different avidins reflect several molecular parameters, including binding-site architecture, the availability of the ligand to solvent and the conformation of the ligand and consequent susceptibility to efficient nucleophilic attack. In avidin, the interaction of BNP with Lys111 and disorder of the L3,4 loop (and consequent solvent availability) together comprise the major driving force behind the hydrolysis, whereas in AVR4 the status of the ligand (the pseudo-substrate) is a major distinguishing feature. In the latter protein, a unique conformation of the L3,4 loop restrains the pseudo-substrate, thereby exposing the carbonyl carbon atom to nucleophilic attack. In addition, due to its conformation, the pseudo-substrate in the AVR4 complex cannot interact with the conserved lysine analogue (Lys109); instead, this function is superseded by polar interactions with Arg112. The results demonstrate that, in highly similar proteins, different residues can perform the same function and that subtle differences in the active-site architecture of such proteins can result in alternative modes of reaction.

Essentials of biorecognition: The (strept)avidin–biotin system as a model for protein–protein and protein–ligand interaction

Molecular recognition or biorecognition is as the heart of all biological interactions. These interactions are characterized by a collection of noncovalent bonds, namely ionic, hydrogen-bonding and hydrophobic interactions. In addition, shape complementarity appears to play a pivotal role in the process of biorecognition. In this review, we examine the versatile avidin-biotin complex as a model system for study of the biorecognition phenomenon with respect to protein-protein, protein-peptide, protein-ligand and protein-DNA interactions.

Thermal and sodium dodecylsulfate induced transitions of streptavidin

The strong specific binding of streptavidin (SA) to biotin is utilized in numerous biotechnological applications. The SA tetramer is also known to exhibit significant stability, even in the presence of sodium dodecylsulfate (SDS). Despite its importance, relatively little is known about the nature of the thermal denaturation pathway for SA. This work uses a homogeneous SA preparation to expand on the data of previous literature reports, leading to the proposal of a model for temperature induced structural changes in SA. Temperature dependent data were obtained by SDS and native polyacrylamide gel electrophoresis (PAGE), differential scanning calorimetry (DSC), and fluorescence and ultraviolet (UV)-visible spectroscopy in the presence and absence of SDS. In addition to the development of this model, it is found that the major thermal transition of SA in 1% SDS is reversible. Finally, although SA exhibits significant precipitation at elevated temperatures in aqueous solution, inclusion of SDS acts to prevent SA aggregation.

Structural Basis of Protein Kinetic Stability: Resistance to Sodium Dodecyl Sulfate Suggests a Central Role for Rigidity and a Bias Toward β-Sheet Structure

The term kinetic stability is used to describe proteins that are trapped in a specific conformation because of an unusually high-unfolding barrier that results in very slow unfolding rates. Motivated by the observation that some proteins are resistant to sodium dodecyl sulfate (SDS)-induced denaturation, an attempt was made to determine whether this property is a result of kinetic stability. We studied many proteins, including a few kinetically stable proteins known to be resistant to SDS. The resistance to SDS-induced denaturation was investigated by comparing the migration on polyacrylamide gels of identical boiled and unboiled protein samples containing SDS. On the basis of the different migration of these samples, eight proteins emerged as being resistant to SDS. The kinetic stability of these proteins was confirmed by their slow unfolding rate upon incubation in guanidine hydrochloride. Further studies showed that these proteins were also extremely resistant to proteolysis by proteinase K, suggesting that a common mechanism may account for their resistance to SDS and proteolytic cleavage. Together, these observations suggest that a rigid protein structure may be the physical basis for kinetic stability and that resistance to SDS may serve as a simple assay for identifying proteins whose native conformations are kinetically trapped. Remarkably, most of the kinetically stable SDS-resistant proteins in this study are oligomeric beta-sheet proteins, suggesting a bias of these types of structures toward kinetic stability.

A streptavidin linker layer that functions after drying

The ability of streptavidin (SA) to simultaneously bind four biotins is often used in linker layers, where a biotinylated molecule is linked to a biotin-functionalized surface via SA. For biosensor and array applications, it is desirable that the SA linker layer be stable to drying and rehydration. In this study it was observed that a significant decrease in binding capacity of a SA layer occurred when that layer was dried. For this study a SA linker layer was constructed by binding SA to a biotin-containing alkylthiolate monolayer (BAT/OEG) self-assembled onto gold. Its stability after drying was investigated using surface plasmon resonance (SPR). Approximately a quarter of the SA layer was removed from the BAT/OEG surface upon drying and rehydration, suggesting disruption of SA-biotin binding when dry. This resulted in the dried SA layer losing approximately 40% of its biotinylated ferritin (BF) binding capacity. Coating the layer with trehalose before drying was found to inhibit the loss of SA from the BAT/OEG surface. SPR showed that the trehalose-protected SA linker layer retained approximately 91% of its original BF binding capacity after drying and rehydration. Atomic force microscopy, which was used to image individual surface-bound SA and BF molecules, qualitatively confirmed these observations.

Rational design of an active avidin monomer

Homotetrameric chicken avidin that binds four molecules of biotin was converted to a monomeric form (monoavidin) by mutations of two interface residues: tryptophan 110 in the 1 --> 2 interface was mutated to lysine and asparagine 54 in the 1 --> 4 interface was converted to alanine. The affinity for biotin binding of the mutant decreased from K(d) approximately 10(-15) m of the wild-type tetramer to K(d) approximately 10(-7) m, which was studied by an optical biosensor IAsys and by a fluorescence spectroscopical method in solution. The binding was completely reversible. Conversion of the tetramer to a monomer results in increased sensitivity to proteinase K digestion. The antigenic properties of the mutated protein were changed, such that monoavidin was only partially recognized by a polyclonal antibody whereas two different monoclonal antibodies entirely failed to recognize the avidin monomer. This new monomeric avidin, which binds biotin reversibly, may be useful for applications both in vitro and in vivo. It may also shed light on the effect of intersubunit interactions on the binding of ligands.

Easily reversible desthiobiotin binding to streptavidin, avidin, and other biotin-binding proteins: uses for protein labeling, detection, and isolation

The high-affinity binding of biotin to avidin, streptavidin, and related proteins has been exploited for decades. However, a disadvantage of the biotin/biotin-binding protein interaction is that it is essentially irreversible under physiological conditions. Desthiobiotin is a biotin analogue that binds less tightly to biotin-binding proteins and is easily displaced by biotin. We synthesized an amine-reactive desthiobiotin derivative for labeling proteins and a desthiobiotin-agarose affinity matrix. Conjugates labeled with desthiobiotin are equivalent to their biotinylated counterparts in cell-staining and antigen-labeling applications. They also bind to streptavidin and other biotin-binding protein-based affinity columns and are recognized by anti-biotin antibodies. Fluorescent streptavidin conjugates saturated with desthiobiotin, but not biotin, bind to a cell-bound biotinylated target without further processing. Streptavidin-based ligands can be gently stripped from desthiobiotin-labeled targets with buffered biotin solutions. Thus, repeated probing with fluorescent streptavidin conjugates followed by enzyme-based detection is possible. In all applications, the desthiobiotin/biotin-binding protein complex is easily dissociated under physiological conditions by either biotin or desthiobiotin. Thus, our desthiobiotin-based reagents and techniques provide some distinct advantages over traditional 2-iminobiotin, monomeric avidin, or other affinity-based techniques.

Interaction between hammerhead ribozyme and RNA substrates measured by a surface plasmon resonance biosensor

Dynamic interactions between hammerhead ribozymes and RNA substrates were measured using the surface plasmon resonance (SPR) technology. Two in vitro transcribed substrates (non-cleavable and cleavable) were immobilised on streptavidin-coated dextran matrices and subsequently challenged with non-related yeast tRNA or two hammerhead ribozymes, both of which had previously been shown to exhibit functional binding and cleavage of complementary target RNAs. The target-binding domain of one of the ribozymes was fully complementary to a 16-ribonucleotide stretch on the immobilised substrates, while the other ribozyme had a nine-ribonucleotide complementarity. The two ribozymes could readily be differentiated with regard to affinity. Cleavage could be measured, using the ribozyme with full target complementarity to the cleavable substrate. In contrast, the ribozyme with lower affinity lacked cleavage activity. We suggest that SPR will be useful for investigations of ribozyme-substrate interactions.

Extremely high thermal stability of streptavidin and avidin upon biotin binding

The effect of biotin binding on the thermal stability of streptavidin (STV) and avidin (AVD) was evaluated using differential scanning calorimetry. Biotin binding increases the midpoint of temperature Tm of thermally induced denaturation of STV and AVD in phosphate buffer from 75 and 83 degrees C to 112 and 117 degrees C at full biotin saturation, respectively. This thermostability is the highest reported for proteins coming from either mesophilic or thermophilic organisms. In both proteins, biotin also increases the calorimetric enthalpy and the cooperativity of the unfolding. Thermal stability of STV was also evaluated in the presence of high concentrations of urea or guanidinium hydrochloride (GuHCl). In 6 M GuHCl, STV remains as a tetramer and the Tm of the STV-biotin complex is centered at 108 degrees C, a few degrees below the value obtained in phosphate buffer. On the contrary, STV under fully saturating condition remains mainly in its dimeric form in 8 M urea and the thermogram shows two endotherms. The main endotherm at a lower temperature has been ascribed to the dimeric liganded state with a Tm of 87 degrees C, and the higher temperature endotherm to the tetrameric liganded form with a Tm of 106 degrees C. As the thermostability of unliganded protein in the presence of urea is unchanged upon binding we related the extremely high thermal stability of this protein to both an increase in structural ordering and compactness with the preservation of the tetramer integrity.

Interference of sugars with the binding of biotin to streptavidin and avidin

Streptavidin and avidin have found widespread use as detection reagents in immunology, biochemistry and cell biology due to their high affinity binding to biotin, but the cellular functions of these proteins are not known. We have found that various sugars interfere with the binding of streptavidin and avidin to biotin. Mannose was most effective in inhibiting the binding to biotin followed by other saccharides. The inhibitory effect is most probably due to interactions of the sugars with residues in the binding pocket of streptavidin and avidin for biotin. These results show that great caution has to be exercised in the evaluation of experiments conducted with these detection reagents in the presence of sugars.

A monoclonal antibody to avidin dissociates quaternary structure and curtails biotin binding to avidin and streptavidin

An anti-avidin mAb, viz., H12G4, is shown to release bound biotin in a dose-dependent manner from holoavidin and holostreptavidin and inhibit the binding of ligand to the two apoproteins. The release of biotin by this mAb is accompanied by quenching of ligand-induced enhanced fluorescence of the FITC-avidin conjugate. In terms of mechanism of release of bound biotin, we demonstrate that on binding to the Fab fragment of the mAb, the native tetrameric holoavidin undergoes dissociation progressively with time to monomers with no bound biotin associated with the latter. Based on the immunoreactivity associated with defined overlapping fragments of avidin obtained by chemical cleavage, the epitope recognized by mAb H12G4 has been localized to residues 58-96 of the primary sequence. By pepscan method of epitope mapping, this mAb is shown to identify a minimal core sequence of 87RNGK90 in avidin and a corresponding sequence of 84RNAH87 in streptavidin.

Structural studies of the streptavidin binding loop

The streptavidin-biotin complex provides the basis for many important biotechnological applications and is an interesting model system for studying high-affinity protein-ligand interactions. We report here crystallographic studies elucidating the conformation of the flexible binding loop of streptavidin (residues 45 to 52) in the unbound and bound forms. The crystal structures of unbound streptavidin have been determined in two monoclinic crystal forms. The binding loop generally adopts an open conformation in the unbound species. In one subunit of one crystal form, the flexible loop adopts the closed conformation and an analysis of packing interactions suggests that protein-protein contacts stabilize the closed loop conformation. In the other crystal form all loops adopt an open conformation. Co-crystallization of streptavidin and biotin resulted in two additional, different crystal forms, with ligand bound in all four binding sites of the first crystal form and biotin bound in only two subunits in a second. The major change associated with binding of biotin is the closure of the surface loop incorporating residues 45 to 52. Residues 49 to 52 display a 3(10) helical conformation in unbound subunits of our structures as opposed to the disordered loops observed in other structure determinations of streptavidin. In addition, the open conformation is stabilized by a beta-sheet hydrogen bond between residues 45 and 52, which cannot occur in the closed conformation. The 3(10) helix is observed in nearly all unbound subunits of both the co-crystallized and ligand-free structures. An analysis of the temperature factors of the binding loop regions suggests that the mobility of the closed loops in the complexed structures is lower than in the open loops of the ligand-free structures. The two biotin bound subunits in the tetramer found in the MONO-b1 crystal form are those that contribute Trp 120 across their respective binding pockets, suggesting a structural link between these binding sites in the tetramer. However, there are no obvious signatures of binding site communication observed upon ligand binding, such as quaternary structure changes or shifts in the region of Trp 120. These studies demonstrate that while crystallographic packing interactions can stabilize both the open and closed forms of the flexible loop, in their absence the loop is open in the unbound state and closed in the presence of biotin. If present in solution, the helical structure in the open loop conformation could moderate the entropic penalty associated with biotin binding by contributing an order-to-disorder component to the loop closure.

Dramatic saccharide-mediated protection of chaotropic-induced deactivation of concanavalin A

This work provides evidence of a physical instance in which some proteins that are usually inactivated under strong chaotropic conditions may become fully resistant through the occupancy of their binding sites with suitable ligands. In this regard, we found that Moluccella laevis lectin remains stable in the presence of denaturant concentrations of urea when an appropriate saccharide is bound to the protein (Alperin, D.M., Latter, H., Lis, H., and Sharon, N. (1992) Biochem. J. 285, 1-4). Extending this finding, we now demonstrate that the occupancy of the ligand binding sites of concanavalin A (Con A) with appropriate carbohydrates completely prevents the denaturation course elicited by 8 M urea at pH 7.4. In addition, the protecting efficiency of the saccharides was shown to be directly related to their specificities for the lectin. The observed saccharide protection follows the order:methyl alpha-D-mannopyranoside > methyl alpha-D-glucopyr-anoside > mannose > fructose > glucose. Concomitantly, the active tetrameric lectin with a molecular mass of approximately 105 kDa is preserved in 8 M urea when methyl alpha-D-mannopyranoside (100 mM) is present in the medium.

Sodium dodecyl sulfate-polyacrylamide gel electrophoretic method for assessing the quaternary state and comparative thermostability of avidin and streptavidin

Avidin, a positively charged egg-white protein, aggregates extensively when mixed at ambient temperatures with anionic detergents, such as sodium dodecyl sulfate (SDS). The resultant aggregates fail to penetrate the stacking gel during polyacrylamide gel electrophoresis (PAGE). To prevent the formation of such aggregates, avidin was acetylated and the pI was thus reduced. Acetylated avidin was found to behave in a manner similar to that of streptavidin; under nondenaturing conditions (i.e., incubation of samples at room temperature), both proteins normally migrated mainly as tetramers with a tendency to form oligomers of the tetramer. When samples were boiled, both proteins migrated mainly as the monomer. The comparative stability properties of avidin and streptavidin were also examined using SDS-PAGE by heating samples and determining the extent of dissociation of tetramers to monomers as a function of temperature. A distinctive transition temperature could be defined for individual samples. Using this assay, it was determined that, in the absence of biotin, the quaternary structure of streptavidin is more stable than that of avidin. Biotin appears to stabilize structures of both avidin and streptavidin to a similar degree. Acetylation of avidin thus provides a simple means to analyze the quaternary structure of the molecule using SDS-PAGE.