Thermodynamic analyses of the catalytic pathway of F1-ATPase from Escherichia coli. Implications regarding the nature of energy coupling by F1-ATPases

Structural and Thermodynamics Studies on Polyaminophosphonate Ligands for Uranyl Decorporation

The development of actinide decorporation agents with high complexation affinity, high tissue specificity, and low biological toxicity is of vital importance for the sustained and healthy development of nuclear energy. After accidental actinide intake, sequestration by chelation therapy to reduce acute damage is considered as the most effective method. In this work, a series of bis- and tetra-phosphonated pyridine ligands have been designed, synthesized, and characterized for uranyl (UO₂²⁺) decorporation. Owing to the absorption of the ligand and the luminescence of the uranyl ion, UV-vis spectroscopy and time-resolved laser-induced fluorescence spectroscopy (TRLFS) were used to probe in situ complexation and structure variation of the complexes formed by the ligands with uranyl. Density functional theory (DFT) calculations and X-ray absorption fine structure (XAFS) spectroscopy on uranyl-ligand complexes revealed the coordination geometry around the uranyl center at pH 3 and 7.4. High affinity constants (log K ∼17) toward the uranyl ion were determined by displacement titration. A preliminary in vitro chelation study proves that bis-phosphonated pyridine ligands can remove uranium from calmodulin (CaM) at a low dose and in the short term, which supports further uranyl decorporation applications of these ligands.

Rotary catalysis of bovine mitochondrial F1-ATPase studied by single-molecule experiments

The reaction scheme of rotary catalysis and the torque generation mechanism of bovine mitochondrial F₁ (bMF₁) were studied in single-molecule experiments. Under ATP-saturated concentrations, high-speed imaging of a single 40-nm gold bead attached to the γ subunit of bMF₁ showed 2 types of intervening pauses during the rotation that were discriminated by short dwell and long dwell. Using ATPγS as a slowly hydrolyzing ATP derivative as well as using a functional mutant βE188D with slowed ATP hydrolysis, the 2 pausing events were distinctively identified. Buffer-exchange experiments with a nonhydrolyzable analog (AMP-PNP) revealed that the long dwell corresponds to the catalytic dwell, that is, the waiting state for hydrolysis, while it remains elusive which catalytic state short pause represents. The angular position of catalytic dwell was determined to be at +80° from the ATP-binding angle, mostly consistent with other F₁s. The position of short dwell was found at 50 to 60° from catalytic dwell, that is, +10 to 20° from the ATP-binding angle. This is a distinct difference from human mitochondrial F₁, which also shows intervening dwell that probably corresponds to the short dwell of bMF₁, at +65° from the binding pause. Furthermore, we conducted "stall-and-release" experiments with magnetic tweezers to reveal how the binding affinity and hydrolysis equilibrium are modulated by the γ rotation. Similar to thermophilic F₁, bMF₁ showed a strong exponential increase in ATP affinity, while the hydrolysis equilibrium did not change significantly. This indicates that the ATP binding process generates larger torque than the hydrolysis process.

ADP-Inhibition of H+-FOF1-ATP Synthase

H+-F_OF₁-ATP synthase (F-ATPase, F-type ATPase, F_OF₁ complex) catalyzes ATP synthesis from ADP and inorganic phosphate in eubacteria, mitochondria, chloroplasts, and some archaea. ATP synthesis is powered by the transmembrane proton transport driven by the proton motive force (PMF) generated by the respiratory or photosynthetic electron transport chains. When the PMF is decreased or absent, ATP synthase catalyzes the reverse reaction, working as an ATP-dependent proton pump. The ATPase activity of the enzyme is regulated by several mechanisms, of which the most conserved is the non-competitive inhibition by the MgADP complex (ADP-inhibition). When ADP binds to the catalytic site without phosphate, the enzyme may undergo conformational changes that lock bound ADP, resulting in enzyme inactivation. PMF can induce release of inhibitory ADP and reactivate ATP synthase; the threshold PMF value required for enzyme reactivation might exceed the PMF for ATP synthesis. Moreover, membrane energization increases the catalytic site affinity to phosphate, thereby reducing the probability of ADP binding without phosphate and preventing enzyme transition to the ADP-inhibited state. Besides phosphate, oxyanions (e.g., sulfite and bicarbonate), alcohols, lauryldimethylamine oxide, and a number of other detergents can weaken ADP-inhibition and increase ATPase activity of the enzyme. In this paper, we review the data on ADP-inhibition of ATP synthases from different organisms and discuss the in vivo role of this phenomenon and its relationship with other regulatory mechanisms, such as ATPase activity inhibition by subunit ε and nucleotide binding in the noncatalytic sites of the enzyme. It should be noted that in Escherichia coli enzyme, ADP-inhibition is relatively weak and rather enhanced than prevented by phosphate.

ATP Synthesis by Oxidative Phosphorylation

The F1F0-ATP synthase (EC 3.6.1.34) is a remarkable enzyme that functions as a rotary motor. It is found in the inner membranes of Escherichia coli and is responsible for the synthesis of ATP in response to an electrochemical proton gradient. Under some conditions, the enzyme functions reversibly and uses the energy of ATP hydrolysis to generate the gradient. The ATP synthase is composed of eight different polypeptide subunits in a stoichiometry of α3β3γδεab2c10. Traditionally they were divided into two physically separable units: an F1 that catalyzes ATP hydrolysis (α3β3γδε) and a membrane-bound F0 sector that transports protons (ab2c10). In terms of rotary function, the subunits can be divided into rotor subunits (γεc10) and stator subunits (α3β3δab2). The stator subunits include six nucleotide binding sites, three catalytic and three noncatalytic, formed primarily by the β and α subunits, respectively. The stator also includes a peripheral stalk composed of δ and b subunits, and part of the proton channel in subunit a. Among the rotor subunits, the c subunits form a ring in the membrane, and interact with subunit a to form the proton channel. Subunits γ and ε bind to the c-ring subunits, and also communicate with the catalytic sites through interactions with α and β subunits. The eight subunits are expressed from a single operon, and posttranscriptional processing and translational regulation ensure that the polypeptides are made at the proper stoichiometry. Recent studies, including those of other species, have elucidated many structural and rotary properties of this enzyme.

Thermodynamic analysis of F1-ATPase rotary catalysis using high-speed imaging

F1-ATPase (F1) is a rotary motor protein fueled by ATP hydrolysis. Although the mechanism for coupling rotation and catalysis has been well studied, the molecular details of individual reaction steps remain elusive. In this study, we performed high-speed imaging of F1 rotation at various temperatures using the total internal reflection dark-field (TIRDF) illumination system, which allows resolution of the F1 catalytic reaction into elementary reaction steps with a high temporal resolution of 72 µs. At a high concentration of ATP, F1 rotation comprised distinct 80° and 40° substeps. The 80° substep, which exhibited significant temperature dependence, is triggered by the temperature-sensitive reaction, whereas the 40° substep is triggered by ATP hydrolysis and the release of inorganic phosphate (Pi). Then, we conducted Arrhenius analysis of the reaction rates to obtain the thermodynamic parameters for individual reaction steps, that is, ATP binding, ATP hydrolysis, Pi release, and TS reaction. Although all reaction steps exhibited similar activation free energy values, ΔG(‡) = 53-56 kJ mol(-1), the contributions of the enthalpy (ΔH(‡)), and entropy (ΔS(‡)) terms were significantly different; the reaction steps that induce tight subunit packing, for example, ATP binding and TS reaction, showed high positive values of both ΔH(‡) and ΔS(‡). The results may reflect modulation of the excluded volume as a function of subunit packing tightness at individual reaction steps, leading to a gain or loss in water entropy.

Timing of inorganic phosphate release modulates the catalytic activity of ATP-driven rotary motor protein

F₁-ATPase is a rotary motor protein driven by ATP hydrolysis. The rotary motion of F₁-ATPase is tightly coupled to catalysis, in which the catalytic sites strictly obey the reaction sequences at the resolution of elementary reaction steps. This fine coordination of the reaction scheme is thought to be important to achieve extremely high chemomechanical coupling efficiency and reversibility, which is the prominent feature of F₁-ATPase among molecular motor proteins. In this study, we intentionally change the reaction scheme by using single-molecule manipulation, and we examine the resulting effect on the rotary motion of F₁-ATPase. When the sequence of the products released, that is, ADP and inorganic phosphate, is switched, we find that F₁ frequently stops rotating for a long time, which corresponds to inactivation of catalysis. This inactive state presents MgADP inhibition, and thus, we find that an improper reaction sequence of F₁-ATPase catalysis induces MgADP inhibition.

The F1-ATPase is a motor protein which exhibits rotary motion as a result of catalytic hydrolysis of ATP. Here, the authors investigate how the sequence of this reaction influences molecular rotation, showing that premature product release can result in protein inactivation.

Free energy conversion in the LUCA: Quo vadis?

Living entities are unimaginable without means to harvest free energy from the environment, that is, without bioenergetics. The quest to understand the bioenergetic ways of early life therefore is one of the crucial elements to understand the emergence of life on our planet. Over the last few years, several mutually exclusive scenarios for primordial bioenergetics have been put forward, all of which are based on some sort of empirical observation, a remarkable step forward from the previous, essentially untestable, ab initio models. We here try to present and compare these scenarios while at the same time discuss their respective empirical weaknesses. The goal of this article is to harness crucial new expertise from the entire field by stimulating a larger part of the bioenergetics community to become involved in "origin-of-energy-metabolism" research. This article is part of a Special Issue entitled: 18th European Bioenergetic Conference.

Rate of hydrolysis in ATP synthase is fine-tuned by α-subunit motif controlling active site conformation

Computer-designed artificial enzymes will require precise understanding of how conformation of active sites may control barrier heights of key transition states, including dependence on structure and dynamics at larger molecular scale. F(o)F(1) ATP synthase is interesting as a model system: a delicate molecular machine synthesizing or hydrolyzing ATP using a rotary motor. Isolated F(1) performs hydrolysis with a rate very sensitive to ATP concentration. Experimental and theoretical results show that, at low ATP concentrations, ATP is slowly hydrolyzed in the so-called tight binding site, whereas at higher concentrations, the binding of additional ATP molecules induces rotation of the central γ-subunit, thereby forcing the site to transform through subtle conformational changes into a loose binding site in which hydrolysis occurs faster. How the 1-Å-scale rearrangements are controlled is not yet fully understood. By a combination of theoretical approaches, we address how large macromolecular rearrangements may manipulate the active site and how the reaction rate changes with active site conformation. Simulations reveal that, in response to γ-subunit position, the active site conformation is fine-tuned mainly by small α-subunit changes. Quantum mechanics-based results confirm that the sub-Ångström gradual changes between tight and loose binding site structures dramatically alter the hydrolysis rate.

Double-lock ratchet mechanism revealing the role of alphaSER-344 in FoF1 ATP synthase

In a majority of living organisms, FoF1 ATP synthase performs the fundamental process of ATP synthesis. Despite the simple net reaction formula, ADP+Pi→ATP+H2O, the detailed step-by-step mechanism of the reaction yet remains to be resolved owing to the complexity of this multisubunit enzyme. Based on quantum mechanical computations using recent high resolution X-ray structures, we propose that during ATP synthesis the enzyme first prepares the inorganic phosphate for the γP-OADP bond-forming step via a double-proton transfer. At this step, the highly conserved αS344 side chain plays a catalytic role. The reaction thereafter progresses through another transition state (TS) having a planar ion configuration to finally form ATP. These two TSs are concluded crucial for ATP synthesis. Using stepwise scans and several models of the nucleotide-bound active site, some of the most important conformational changes were traced toward direction of synthesis. Interestingly, as the active site geometry progresses toward the ATP-favoring tight binding site, at both of these TSs, a dramatic increase in barrier heights is observed for the reverse direction, i.e., hydrolysis of ATP. This change could indicate a "ratchet" mechanism for the enzyme to ensure efficacy of ATP synthesis by shifting residue conformation and thus locking access to the crucial TSs.

Temperature dependence of single molecule rotation of the Escherichia coli ATP synthase F1 sector reveals the importance of gamma-beta subunit interactions in the catalytic dwell

The temperature-dependent rotation of F1-ATPase gamma subunit was observed in V(max) conditions at low viscous drag using a 60-nm gold bead (Nakanishi-Matsui, M., Kashiwagi, S., Hosokawa, H., Cipriano, D. J., Dunn, S. D., Wada, Y., and Futai, M. (2006) J. Biol. Chem. 281, 4126-4131). The Arrhenius slopes of the speed of the individual 120 degrees steps and reciprocal of the pause length between rotation steps were very similar, indicating a flat energy pathway followed by the rotationally coupled catalytic cycle. In contrast, the Arrhenius slope of the reciprocal pause length of the gammaM23K mutant F1 was significantly increased, whereas that of the rotation rate was similar to wild type. The effects of the rotor gammaM23K substitution and the counteracting effects of betaE381D mutation in the interacting stator subunits demonstrate that the rotor-stator interactions play critical roles in the utilization of stored elastic energy. The gammaM23K enzyme must overcome an abrupt activation energy barrier, forcing it onto a less favored pathway that results in uncoupling catalysis from rotation.

A rotor-stator cross-link in the F1-ATPase blocks the rate-limiting step of rotational catalysis

The F(0)F(1)-ATP synthase couples the functions of H(+) transport and ATP synthesis/hydrolysis through the efficient transmission of energy mediated by rotation of the centrally located gamma, epsilon, and c subunits. To understand the gamma subunit role in the catalytic mechanism, we previously determined the partial rate constants and devised a minimal kinetic model for the rotational hydrolytic mode of the F(1)-ATPase enzyme that uniquely fits the pre-steady state and steady state data ( Baylis Scanlon, J. A., Al-Shawi, M. K., Le, N. P., and Nakamoto, R. K. (2007) Biochemistry 46, 8785-8797 ). Here we directly test the model using two single cysteine mutants, betaD380C and betaE381C, which can be used to reversibly inhibit rotation upon formation of a cross-link with the conserved gammaCys-87. In the pre-steady state, the gamma-beta cross-linked enzyme at high Mg.ATP conditions retained the burst of hydrolysis but was not able to release P(i). These data show that the rate-limiting rotation step, k(gamma), occurs after hydrolysis and before P(i) release. This analysis provides additional insights into how the enzyme achieves efficient coupling and implicates the betaGlu-381 residue for proper formation of the rate-limiting transition state involving gamma subunit rotation.

The rotary mechanism of the ATP synthase

The F0F1 ATP synthase is a large complex of at least 22 subunits, more than half of which are in the membranous F0 sector. This nearly ubiquitous transporter is responsible for the majority of ATP synthesis in oxidative and photo-phosphorylation, and its overall structure and mechanism have remained conserved throughout evolution. Most examples utilize the proton motive force to drive ATP synthesis except for a few bacteria, which use a sodium motive force. A remarkable feature of the complex is the rotary movement of an assembly of subunits that plays essential roles in both transport and catalytic mechanisms. This review addresses the role of rotation in catalysis of ATP synthesis/hydrolysis and the transport of protons or sodium.

Role of alphaPhe-291 residue in the phosphate-binding subdomain of catalytic sites of Escherichia coli ATP synthase

The role of alphaPhe-291 residue in phosphate binding by Escherichia coli F1F0-ATP synthase was examined. X-ray structures of bovine mitochondrial enzyme suggest that this residue resides in close proximity to the conserved betaR246 residue. Herein, we show that mutations alphaF291D and alphaF291E in E. coli reduce the ATPase activity of F1F0 membranes by 350-fold. Yet, significant oxidative phosphorylation activity is retained. In contrast to wild-type, ATPase activities of mutants were not inhibited by MgADP-azide, MgADP-fluoroaluminate, or MgADP-fluoroscandium. Whereas, 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) inhibited wild-type ATPase essentially completely, ATPase in mutants was inhibited maximally by approximately 75%, although reaction still occurred at residue betaTyr-297, proximal to alphaPhe-291 in the phosphate-binding pocket. Inhibition characteristics supported the conclusion that NBD-Cl reacts in betaE (empty) catalytic sites, as shown previously by X-ray structure analysis. Phosphate protected against NBD-Cl inhibition in wild-type but not in mutants. In addition, our data suggest that the interaction of alphaPhe-291 with phosphate during ATP hydrolysis or synthesis may be distinct.

ATP hydrolysis in the betaTP and betaDP catalytic sites of F1-ATPase

The enzyme F1-adenosine triphosphatase (ATPase) is a molecular motor that converts the chemical energy stored in the molecule adenosine triphosphate (ATP) into mechanical rotation of its gamma-subunit. During steady-state catalysis, the three catalytic sites of F1 operate in a cooperative fashion such that at every instant each site is in a different conformation corresponding to a different stage along the catalytic cycle. Notwithstanding a large amount of biochemical and, recently, structural data, we still lack an understanding of how ATP hydrolysis in F1 is coupled to mechanical motion and how the catalytic sites achieve cooperativity during rotatory catalysis. In this publication, we report combined quantum mechanical/molecular mechanical simulations of ATP hydrolysis in the betaTP and betaDP catalytic sites of F1-ATPase. Our simulations reveal a dramatic change in the reaction energetics from strongly endothermic in betaTP to approximately equienergetic in betaDP. The simulations identify the responsible protein residues, the arginine finger alphaR373 being the most important one. Similar to our earlier study of betaTP, we find a multicenter proton relay mechanism to be the energetically most favorable hydrolysis pathway. The results elucidate how cooperativity between catalytic sites might be achieved by this remarkable molecular motor.

Mutagenesis of residue betaArg-246 in the phosphate-binding subdomain of catalytic sites of Escherichia coli F1-ATPase

Residues responsible for phosphate binding in F(1)F(0)-ATP synthase catalytic sites are of significant interest because phosphate binding is believed linked to proton gradient-driven subunit rotation. From x-ray structures, a phosphate-binding subdomain is evident in catalytic sites, with conserved betaArg-246 in a suitable position to bind phosphate. Mutations betaR246Q, betaR246K, and betaR246A in Escherichia coli were found to impair oxidative phosphorylation and to reduce ATPase activity of purified F(1) by 100-fold. In contrast to wild type, ATPase of mutants was not inhibited by MgADP-fluoroaluminate or MgADP-fluoroscandium, showing the Arg side chain is required for wild-type transition state formation. Whereas 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) inhibited wild-type ATPase essentially completely, ATPase in mutants was inhibited maximally by approximately 50%, although reaction still occurred at residue betaTyr-297, proximal to betaArg-246 in the phosphate-binding pocket. Inhibition characteristics supported the conclusion that NBD-Cl reacts in betaE (empty) catalytic sites, as shown previously by x-ray structure analysis. Phosphate protected against NBD-Cl inhibition in wild type but not in mutants. The results show that phosphate can bind in the betaE catalytic site of E. coli F(1) and that betaArg-246 is an important phosphate-binding residue.

Converting conformational changes to electrostatic energy in molecular motors: The energetics of ATP synthase

F1-ATPase is the catalytic component of the ATP synthase molecular machine responsible for most of the uphill synthesis of ATP in living systems. The enormous advances in biochemical and structural studies of this machine provide an opportunity for detailed understanding of the nature of its rotary mechanism. However, further quantitative progress in this direction requires development of reliable ways of translating the observed structural changes to the corresponding energies. This requirement is particularly challenging because we are dealing with a large system that couples major structural changes with a chemical process. The present work provides such a structure-function correlation by using the linear response approximation to describe the rotary mechanism. This approach allows one to evaluate the energy of transitions between different conformational states by considering only the changes in the corresponding electrostatic energies of the ligands. The relevant energetics are also obtained by calculating the linear response approximation-based free energies of transferring the ligands from water to the different sites of F1-ATPase in their different conformational states. We also use the empirical valence bond approach to evaluate the actual free-energy profile for the ATP synthesis in the different conformational states of the system. Integrating the information from the different approaches provides a semiquantitative structure-function correlation for F1-ATPase. It is found that the conformational changes are converted to changes in the electrostatic interaction between the protein and its ligands, which drives the ATP synthesis.

On the mechanism of ATP hydrolysis in F1-ATPase

Most of the cellular ATP in living organisms is synthesized by the enzyme F(1)F(o)-ATP synthase. The water soluble F(1) part of the enzyme can also work in reverse and utilize the chemical energy released during ATP hydrolysis to generate mechanical motion. Despite the availability of a large amount of biochemical data and several x-ray crystallographic structures of F(1), there still remains a considerable lack of understanding as to how this protein efficiently converts the chemical energy released during the reaction ATP + H(2)O --> ADP + P(i) into mechanical motion of the stalk. We report here an ab initio QM/MM study of ATP hydrolysis in the beta(TP) catalytic site of F(1). Our simulations provide an atomic level description of the reaction path, its energetics, and the interaction of the nucleotide with the protein environment during catalysis. The simulations suggest that the reaction path with the lowest potential energy barrier proceeds via nucleophilic attack on the gamma-phosphate involving two water molecules. Furthermore, the ATP hydrolysis reaction in beta(TP) is found to be endothermic, demonstrating that the catalytic site is able to support the synthesis of ATP and does not promote ATP hydrolysis in the particular conformation studied.

The H+-ATPase from chloroplasts: effect of different reconstitution procedures on ATP synthesis activity and on phosphate dependence of ATP synthesis

The H+-ATP synthase from chloroplasts, CF0F1, was isolated, reconstituted into liposomes and ATP synthesis activity was measured after energization of the proteoliposomes with an acid-base transition. The ATP yield was measured as a function of the reaction time after energization, the data were fitted by an exponential function and the initial rate was calculated from the fit parameters. CF0F1 was reconstituted by detergent dialysis in asolectin liposomes and phosphatidylcholine/phosphatidic acid (PtdCho/PtdAc from egg yolk) liposomes. In asolectin liposomes, high initial rates of ATP synthesis (up to 400 s(-1)) were observed with a rapid decline of the rate; in PtdCho/PtdAc liposomes the initial rate is smaller (up to 200 s(-1)), but the decline of the activity is slower. CF0F1 was reconstituted into PtdCho/PtdAc liposomes either by detergent dialysis or into reverse phase liposomes. The dependence of the rate of ATP synthesis on the phosphate concentration was measured with both types of proteoliposomes. The data can be described by Michaelis-Menten kinetics with a K(M) value of 350 microM for reverse phase liposomes and a K(M) value of 970 microM for dialysis liposomes. Both K(M) values depend neither on the magnitude of DeltapH nor on the electric potential difference, whereas V(max) decreases strongly with decreasing energization. At low phosphate concentration, there are small deviations from Michaelis-Menten kinetics. The measured rates are higher than those calculated from the fitted Michaelis-Menten parameters. This effect is interpreted as evidence that more than one phosphate binding site is involved in ATP synthesis.

Structure of bovine mitochondrial F(1)-ATPase with nucleotide bound to all three catalytic sites: implications for the mechanism of rotary catalysis

The crystal structure of a novel aluminium fluoride inhibited form of bovine mitochondrial F(1)-ATPase has been determined at 2 A resolution. In contrast to all previously determined structures of the bovine enzyme, all three catalytic sites are occupied by nucleotide. The subunit that did not bind nucleotide in previous structures binds ADP and sulfate (mimicking phosphate), and adopts a "half-closed" conformation. This structure probably represents the posthydrolysis, pre-product release step on the catalytic pathway. A catalytic scheme for hydrolysis (and synthesis) at physiological rates and a mechanism for the ATP-driven rotation of the gamma subunit are proposed based on the crystal structures of the bovine enzyme.

Formation and properties of hybrid photosynthetic F1-ATPases. Demonstration of different structural requirements for stimulation and inhibition by tentoxin

A hybrid ATPase composed of cloned chloroplast ATP synthase beta and gamma subunits (betaC and gammaC) and the cloned alpha subunit from the Rhodospirillum rubrum ATP synthase (alphaR) was assembled using solubilized inclusion bodies and a simple single-step folding procedure. The catalytic properties of the assembled alpha3Rbeta3CgammaC were compared to those of the core alpha3Cbeta3CgammaC complex of the native chloroplast coupling factor 1 (CF1) and to another recently described hybrid enzyme containing R. rubrum alpha and beta subunits and the CF1 gamma subunit (alpha3Rbeta3RgammaC). All three enzymes were similarly stimulated by dithiothreitol and inhibited by copper chloride in response to reduction and oxidation, respectively, of the disulfide bond in the chloroplast gamma subunit. In addition, all three enzymes exhibited the same concentration dependence for inhibition by the CF1 epsilon subunit. Thus the CF1 gamma subunit conferred full redox regulation and normal epsilon binding to the two hybrid enzymes. Only the native CF1 alpha3Cbeta3CgammaC complex was inhibited by tentoxin, confirming the requirement for both CF1 alpha and beta subunits for tentoxin inhibition. However, the alpha3Rbeta3CgammaC complex, like the alpha3Cbeta3CgammaC complex, was stimulated by tentoxin at concentrations in excess of 10 microm. In addition, replacement of the aspartate at position 83 in betaC with leucine resulted in the loss of stimulation in the alpha3Rbeta3CgammaC hybrid. The results indicate that both inhibition and stimulation by tentoxin require a similar structural contribution from the beta subunit, but differ in their requirements for alpha subunit structure.

Molecular mechanisms of rotational catalysis in the F(0)F(1) ATP synthase

Rotation of the F(0)F(1) ATP synthase gamma subunit drives each of the three catalytic sites through their reaction pathways. The enzyme completes three cycles and synthesizes or hydrolyzes three ATP for each 360 degrees rotation of the gamma subunit. Mutagenesis studies have yielded considerable information on the roles of interactions between the rotor gamma subunit and the catalytic beta subunits. Amino acid substitutions, such as replacement of the conserved gammaMet-23 by Lys, cause altered interactions between gamma and beta subunits that have dramatic effects on the transition state of the steady state ATP synthesis and hydrolysis reactions. The mutations also perturb transmission of specific conformational information between subunits which is important for efficient conversion of energy between rotation and catalysis, and render the coupling between catalysis and transport inefficient. Amino acid replacements in the transport domain also affect the steady state catalytic transition state indicating that rotation is involved in coupling to transport.

Catalytic site forms and controls in ATP synthase catalysis

A suggested minimal scheme for substrate binding by and interconversion of three forms of the catalytic sites of the ATP synthase is presented. Each binding change, that drives simultaneous interchange of the three catalytic site forms, requires a 120 degrees rotation of the gamma with respect to the beta subunits. The binding of substrate(s) at two catalytic sites is regarded as sufficing for near maximal catalytic rates to be attained. Although three sites do not need to be filled for rapid catalysis, during rapid bisite catalysis some enzyme may be transiently present with three sites filled. Forms with preferential binding for ADP and P(i) or for ATP are considered to arise from the transition state and participate in other steps of the catalysis. Intermediate forms and steps that may be involved are evaluated. Experimental evidence for energy-dependent steps and for control of coupling to proton translocation and transition state forms are reviewed. Impact of relevant past data on present understanding of catalytic events is considered. In synthesis a key step is suggested in which proton translocation begins to deform an open site so as to increase the affinity for ADP and P(i), that then bind and pass through the transition state, and yield tightly bound ATP in one binding change. ADP binding appears to be a key parameter controlling rotation during synthesis. In hydrolysis ATP binding to a loose site likely precedes any proton translocation, with proton movement occurring as the tight site form develops. Aspects needing further study are noted. Characteristics of the related MgADP inhibition of the F(1) ATPases that have undermined many observations are summarized, and relations of three-site filling to catalysis are assessed.

Escherichia coli ATP synthase alpha subunit Arg-376: the catalytic site arginine does not participate in the hydrolysis/synthesis reaction but is required for promotion to the steady state

The three catalytic sites of the F(O)F(1) ATP synthase interact through a cooperative mechanism that is required for the promotion of catalysis. Replacement of the conserved alpha subunit Arg-376 in the Escherichia coli F(1) catalytic site with Ala or Lys resulted in turnover rates of ATP hydrolysis that were 2 x 10(3)-fold lower than that of the wild type. Mutant enzymes catalyzed hydrolysis at a single site with kinetics similar to that of the wild type; however, addition of excess ATP did not chase bound ATP, ADP, or Pi from the catalytic site, indicating that binding of ATP to the second and third sites failed to promote release of products from the first site. Direct monitoring of nucleotide binding in the alphaR376A and alphaR376K mutant F(1) by a tryptophan in place of betaTyr-331 (Weber et al. (1993) J. Biol. Chem. 268, 20126-20133) showed that the catalytic sites of the mutant enzymes, like the wild type, have different affinities and therefore, are structurally asymmetric. These results indicate that alphaArg-376, which is close to the beta- or gamma-phosphate group of bound ADP or ATP, respectively, does not make a significant contribution to the catalytic reaction, but coordination of the arginine to nucleotide filling the low-affinity sites is essential for promotion of rotational catalysis to steady-state turnover.

Synthesis and hydrolysis of ATP and the phosphate-ATP exchange reaction in soluble mitochondrial F1 in the presence of dimethylsulfoxide

In medium containing 40% dimethylsulfoxide, soluble F1 catalyzes the hydrolysis of ATP introduced at concentrations lower than that of the enzyme [Al-Shawi, M.K. & Senior, A.E. (1992), Biochemistry 31, 886-891]. At this concentration of dimethylsulfoxide, soluble F1 also catalyzes the spontaneous synthesis of a tightly bound ATP to a level of approximately 0.15 mol per mol F1 [Gómez-Puyou, A., Tuena de Gómez-Puyou, M. & de Meis, L. (1986) Eur. J. Biochem. 159, 133-140]. The mechanisms that allow soluble F1 to carry out these apparently opposing reactions were studied. The rate of hydrolysis of ATP bound to F1 under uni-site conditions and that of synthesis of ATP were markedly similar, indicating that the two ATP molecules lie in equivalent high affinity catalytic sites. The number of enzyme molecules that have ATP at the high affinity catalytic site under conditions of synthesis or uni-site hydrolysis is less than the total number of enzyme molecules. Therefore, it was hypothesized that when the enzyme was treated with dimethylsulfoxide, a fraction of the F1 population carried out synthesis and another hydrolysis. Indeed, measurements of the two reactions under identical conditions showed that different fractions of the F1 population carried out simultaneously synthesis and hydrolysis of ATP. The reactions continued until an equilibrium level between F1.ADP + Pi <--> F1.ATP was established. At equilibrium, about 15% of the enzyme population was in the form F1.ATP. The DeltaG degrees of the reaction with 0.54 microM F1, 2 mM Pi and 10 mM Mg2+ at pH 6.8 was -2.7 kcal.mol-1 in favor of F1.ATP. The DeltaG degrees of the reaction did not exhibit important variations with Pi concentration; thus, the reaction was in thermodynamic equilibrium. In contrast, DeltaG degrees became significantly less negative as the concentration of dimethylsulfoxide was decreased. In water, the reaction was far to the left. The equilibrium constant of the reaction diminished linearly with an increase in water activity. The effect of solvent is fully reversible. In comparison to other enzymes, F1 seems unique in that solvent controls the equilibrium that exists within an enzyme population. This results from the effect of solvent on the partition of Pi between the catalytic site and the medium, and the large energetic barrier that prevents release of ATP from the catalytic site. In the presence of dimethylsulfoxide and Pi, ATP is continuously hydrolyzed and synthesized with formation and uptake of Pi from the medium. This process is essentially an exchange reaction analogous to the phosphate-ATP exchange reaction that is catalyzed by the ATP synthase in coupled energy transducing membranes.

Rotational coupling in the F0F1 ATP synthase

The F0F1 ATP synthase is a large multisubunit complex that couples translocation of protons down an electrochemical gradient to the synthesis of ATP. Recent advances in structural analyses have led to the demonstration that the enzyme utilizes a rotational catalytic mechanism. Kinetic and biochemical evidence is consistent with the expected equal participation of the three catalytic sites in the alpha 3 beta 3 hexamer, which operate in sequential, cooperative reaction pathways. The rotation of the core gamma subunit plays critical roles in establishing the conformation of the sites and the cooperative interactions. Mutational analyses have shown that the rotor subunits are responsible for coupling and in doing so transmit specific conformational information between transport and catalysis.

Binding of the transition state analog MgADP-fluoroaluminate to F1-ATPase

Escherichia coli F1-ATPase from mutant betaY331W was potently inhibited by fluoroaluminate plus MgADP but not by MgADP alone. beta-Trp-331 fluorescence was used to measure MgADP binding to catalytic sites. Fluoroaluminate induced a very large increase in MgADP binding affinity at catalytic site one, a smaller increase at site two, and no effect at site three. Mutation of either of the critical catalytic site residues beta-Lys-155 or beta-Glu-181 to Gln abolished the effects of fluoroaluminate on MgADP binding. The results indicate that the MgADP-fluoroaluminate complex is a transition state analog and independently demonstrate that residues beta-Lys-155 and (particularly) beta-Glu-181 are important for generation and stabilization of the catalytic transition state. Dicyclohexylcarbodiimide-inhibited enzyme, with 1% residual steady-state ATPase, showed normal transition state formation as judged by fluoroaluminate-induced MgADP binding affinity changes, consistent with a proposed mechanism by which dicyclohexylcarbodiimide prevents a conformational interaction between catalytic sites but does not affect the catalytic step per se. The fluorescence technique should prove valuable for future transition state studies of F1-ATPase.

Stability of the Escherichia coli ATP synthase F0F1 complex is dependent on interactions between gamma Gln-269 and the beta subunit loop beta Asp-301-beta Asp-305

The role of the conserved sequence motif 301DDLTDP306 in the F0F1 ATP synthase beta subunit was assessed by mutagenic analysis in the Escherichia coli enzyme. Mutations gave variable effects on F1 sector activity, stability, and membrane binding to the F0 sector. Upon solubilization, F1 sectors of the betaD302E and betaD305E mutants (betaAsp-302 and betaAsp-305 replaced by glutamate) dissociated into subunits, while mutants with other beta305 substitutions failed to assemble. Membrane ATPase activities of beta301 and 302 mutants were 20-70% of wild type. Replacements of the gamma subunit Gln-269 had similar effects. The membrane ATPase activities of the gammaQ269E or gammaQ269D mutants were significantly lower and their F1 sectors dissociated into subunits upon solubilization. These results suggest that the beta301-305 loop and the gamma subunit region around Gln-269 form a key region for the assembly of alpha3 beta3 gamma complex. These results are consistent with the X-ray crystallographic structure of bovine F1 (J. P. Abrahams, A. G. W. Leslie, R. Lutter, and J. E. Walker (1994) Nature 370, 621-628) where the beta301DDLTD305 loop directly interacts with gammaGln-269.

Unisite catalysis without rotation of the gamma-epsilon domain in Escherichia coli F1-ATPase

Unisite [gamma-32P]ATP hydrolysis was studied in ECF1 from the mutant betaE381C after generating a single disulfide bond between beta and gamma subunits to prevent the rotation of the gamma/epsilon domain. The single beta-gamma cross-link was obtained by removal of the delta subunit from F1 and then treating with CuCl2 as described previously (Aggeler, R., Haughton, M. A., and Capaldi, R. A. (1996) J. Biol. Chem. 270, 9185-9191). The mutant enzyme, betaE381C, had an increased overall rate of unisite hydrolysis of [gamma-32P]ATP compared with the wild type ECF1 due to increases in the rate of ATP binding (k+1), Pi release (k+3), and ADP release (k+4). Release of bound substrate ([gamma-32P]ATP) was also increased in the betaE381C mutant. Cross-linking between Cys-381 and the intrinsic Cys-87 of gamma caused a further increase in the rate of unisite catalysis, mainly by additional effects on nucleotide binding in the high affinity catalytic site (k+1 and k+4). In delta-subunit-free ECF1 from wild type or betaE381C F1, addition of an excess of ATP accelerated unisite catalysis. After cross-linking, unisite catalysis of betaE381C was not enhanced by the cold chase. The covalent linkage of gamma to beta increased the rate of unisite catalysis to that obtained by cold chase of ATP of the noncross-linked enzyme. It is concluded that the conversion of Glu-381 of beta to Cys induces an activated conformation of the high affinity catalytic site with low affinity for substrate and products. This state is stabilized by cross-linking the Cys at beta381 to Cys-87 of gamma. We infer from the data that rotation of the gamma/epsilon rotor in ECF1 is not linked to unisite hydrolysis of ATP at the high affinity catalytic site but to ATP binding to a second or third catalytic site on the enzyme.

Unisite ATP hydrolysis by soluble Rhodospirillum rubrum F1-ATPase is accelerated by Ca2+

At saturating concentrations of ATP, soluble F1 from the Rhodospirillum rubrum (RF1) exhibits a higher rate of hydrolysis with Ca2+ than with Mg2+. The mechanisms involved in the expression of a higher catalytic activity with Ca2+ were explored by measuring the ATPase activity of RF1 at substiochiometric concentrations of ATP (unisite conditions). At a ratio of 0.25 [gamma-32P]ATP per RF1, the enzyme exhibited a 50 times higher hydrolytic rate with Ca2+ than with Mg2+. The rate of [gamma-32P]ATP binding to RF1 was in the same range with the two divalent metal ions. Centrifugation-filtration of RF1 exposed to substoichiometric [gamma-32P]ATP concentrations and Mg2+ through Sephadex columns yielded an enzyme that contained [gamma-32P]ATP and [32P]phosphate in a stoichiometry that was close to one. In the presence of Ca2+, the eluted enzyme did not contain [gamma-32P]ATP nor [32P]phosphate. This indicated that the rate of product release was faster with Ca2+ than with Mg2+. It was also observed that the ratio of multisite to unisite hydrolysis rates was of similar magnitude with both divalent cations. This suggests that they do not affect differently the cooperative mechanisms that may exist between catalytic sites. In consequence, the higher ATPase activity of RF1 in presence of Ca2+ strongly suggests that the retention time of products is decreased in the presence of this cation. Copyright 1998 Elsevier Science B.V.

Acceleration of unisite catalysis of mitochondrial F1-adenosinetriphosphatase by ATP, ADP and pyrophosphate--hydrolysis and release of the previously bound [gamma-32P]ATP

The effect of ATP, ADP and pyrophosphate (PPi) on hydrolysis and release of [gamma-32P]ATP bound to the high-affinity catalytic site of soluble F1 from bovine heart mitochondria under unisite conditions [Grubmeyer, C., Cross, R. L. & Penefsky, H. S. (1982) J. Biol. Chem. 257, 12092-12100] was studied. In accord with the previous data, it was observed that millimolar concentrations of ATP or ADP added to F1 undergoing unisite hydrolysis of [gamma-32P]ATP accelerated its hydrolysis. PPi also produced a hydrolytic burst of a fraction of the previously bound [gamma-32P]ATP; kinetic data suggested that for production of optimal hydrolysis by PPi of the bound [gamma-32P]ATP, two binding sites with apparent Kd of 27 microM and 240 microM must be filled. The extent of the hydrolytic burst induced by MgPPi was lower than that induced by ADP and ATP. In F1 in which PPi had produced a hydrolytic burst of the bound [gamma-32P]ATP, the addition of ATP induced a second burst of hydrolysis. By filtration experiments and enzyme trapping, it was also studied whether ATP, ADP and PPi produce release of the tightly bound [gamma-32P]ATP. At millimolar concentrations, ATP and ADP brought about release of about 25% of the previously bound [gamma-32P]ATP. At micromolar concentrations, ADP accelerated the hydrolysis of the previously bound [gamma-32P]ATP but not its release. Hence, the hydrolytic and release reactions could be separated, indicating that the two reactions require the occupancy of different sites in F1. With PPi, no release of the tightly bound [gamma-32P]ATP was observed. The ADP induced hydrolysis and release of the F1-bound [gamma-32P]ATP were inhibited by sodium azide to the same extent (60%). Since release of ATP from a high-affinity catalytic site of F1 represents the terminal step of oxidative phosphorylation, the data illustrate that the binding energy of substrates to F1 is critical to the ejection of ATP into the media. The failure of PPi to induce release of [gamma-32P]ATP bound to F1 under unisite conditions is probably due to its lower binding energy.

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

Energy coupling, turnover, and stability of the F0F1 ATP synthase are dependent on the energy of interaction between gamma and beta subunits

Replacement of the F0F1 ATP synthase gamma subunit Met-23 with Lys (gammaM23K) perturbs coupling efficiency between transport and catalysis (Shin, K., Nakamoto, R. K., Maeda, M., and Futai, M. (1992) J. Biol. Chem. 267, 20835-20839). We demonstrate here that the gammaM23K mutation causes altered interactions between subunits. Binding of delta or epsilon subunits stabilizes the alpha3beta3gamma complex, which becomes destabilized by the mutation. Significantly, the inhibition of F1 ATP hydrolysis by the epsilon subunit is no longer relieved when the gammaM23K mutant F1 is bound to F0. Steady state Arrhenius analysis reveals that the gammaM23K enzyme has increased activation energies for the catalytic transition state. These results suggest that the mutation causes the formation of additional bonds within the enzyme that must be broken in order to achieve the transition state. Based on the x-ray crystallographic structure of Abrahams et al. (Abrahams, J. P., Leslie, A. G. W., Lutter, R., and Walker, J. E. (1994) Nature 370, 621-628), the additional bond is likely due to gammaM23K forming an ionized hydrogen bond with one of the betaGlu-381 residues. Two second site mutations, gammaQ269R and gammaR242C, suppress the effects of gammaM23K and decrease activation energies for the gammaM23K enzyme. We conclude that gammaM23K is an added function mutation that increases the energy of interaction between gamma and beta subunits. The additional interaction perturbs transmission of conformational information such that epsilon inhibition of ATPase activity is not relieved and coupling efficiency is lowered.

The ATP synthase--a splendid molecular machine

An X-ray structure of the F1 portion of the mitochondrial ATP synthase shows asymmetry and differences in nucleotide binding of the catalytic beta subunits that support the binding change mechanism with an internal rotation of the gamma subunit. Other structural and mutational probes of the F1 and F0 portions of the ATP synthase are reviewed, together with kinetic and other evaluations of catalytic site occupancy and behavior during hydrolysis or synthesis of ATP. Subunit function as related to proton translocation and rotational catalysis is considered. Physical demonstrations of the gamma subunit rotation have been achieved. The findings have implications for other enzymatic catalyses.

Synthesis of medium pyrophosphate by soluble mitochondrial F1 through dimethyl sulfoxide-water transitions

Soluble F1 from heart mitochondria incubated in mixtures that have Mg2+, inorganic phosphate, and dimethyl sulfoxide (40% (v/v)) catalyzes the spontaneous synthesis of ATP and pyrophosphate (Tuena de Gómez-Puyou, M., García, J. J., and Gómez-Puyou, A. (1993) Biochemistry 32, 2213-2218). By filtration techniques, it was determined that synthesized ATP and pyrophosphate are enzyme bound, albeit the affinity for pyrophosphate was lower than that of ATP. After ATP and pyrophosphate were formed in dimethyl sulfoxide mixtures, dilution with aqueous buffer to a dimethyl sulfoxide concentration of 6.0% brought about the partition of pyrophosphate into the media. This was evidenced by filtration experiments as well as by the accessibility of synthesized pyrophosphate to soluble inorganic pyrophosphatase. Release of pyrophosphate induced by dilution occurred in less than 15 s. Under conditions that produce release of pyrophosphate, no release of ATP was observed; instead, ATP underwent hydrolysis. Studies on the effect of arsenate on the synthesis and hydrolysis of ATP and PPi in F1 showed that hydrolysis of synthesized PPi at its site of synthesis was slower than that of ATP. Thus, the question of whether differences in the rates of hydrolysis accounted for the dilution-induced release of PPi but not of ATP was addressed. Synthesis and hydrolysis of ATP and pyrophosphate were examined in preparations of soluble F1 in complex with its inhibitor protein; the complex had an ATPase activity about 100 times lower than that of free F1. In mixtures that contained dimethyl sulfoxide, the complex synthesized ATP and pyrophosphate at nearly the same rates; upon dilution, hydrolysis of both compounds occurred also at similar rates, yet only pyrophosphate was released. The same phenomenon was observed in F1 that had been depleted of adenine nucleotides. Hence, dilution-induced release of PPi was independent of the overall catalytic properties of the enzyme or its content of adenine nucleotides. Since synthesis of ATP occurs at the expense of the ADP that remains after depletion of adenine nucleotides, it is likely that the failure of ATP to be released is due to the high affinity that F1 exhibits for the synthesized ATP. Nevertheless, the results illustrate that a complete catalytic cycle that starts with medium Pi and ends with medium pyrophosphate may be reproduced in soluble mitochondrial F1.

Energetics of ATP dissociation from the mitochondrial ATPase during oxidative phosphorylation

The dissociation constant (KdATP) for ATP bound in the high affinity catalytic site of membrane-bound beef heart mitochondrial ATPase (F1) was calculated from the ratio of the rate constants for the reverse dissociation step (k-1) and the forward binding step (k+1). k-1 for ATP bound to submitochondrial particles or to submitochondrial particles washed with KCl so as to activate ATPase activity was accelerated by about five orders of magnitude during respiratory chain-linked oxidations of NADH. In the presence of NADH and 0.1 mM ADP, k-1 increased more than six orders of magnitude. These energy-dependent dissociations of ATP were sensitive to the uncoupler carbonyl cyanide p-trifluoromethyloxyphenylhydrazone. Only small changes in k+1 were observed in the presence of NADH or NADH and ADP. KdATP at 23 degrees C in the absence of NADH and ADP was 10(-12) M, in the presence of NADH, 3 microM, and in the presence of NADH and 0.1 mM ADP, 60 microM. Thus, the dissociation of ATP during the transition from non-energized to energized states was, under these conditions, accompanied by observed free energy changes of 8 and 9.7 kcal/mol, respectively.

ATP synthase complex. Proximities of subunits in bovine submitochondrial particles

The catalytic sector, F1, and the membrane sector, F0, of the mitochondrial ATP synthase complex are joined together by a 45-A-long stalk. Knowledge of the composition and structure of the stalk is crucial to investigating the mechanism of conformational energy transfer between F0 and F1. This paper reports on the near neighbor relationships of the stalk subunits with one another and with the subunits of F1 and F0, as revealed by cross-linking experiments. The preparations subjected to cross-linking were bovine heart submitochondrial particles (SMP) and F1-deficient SMP. The cross-linkers were three reagents of different chemical specificities and different lengths of cross-linking from zero to 10 A. Cross-linked products were identified after gel electrophoresis of the particles and immunoblotting with subunit-specific antibodies to the individual subunits alpha, beta, gamma, delta, OSCP, F6, A6L, a (subunit 6), b, c, and d. The results suggested that the two b subunits form the principal stem of the stalk to which OSCP, d, and F6 are bound independent of one another. Subunits b, OSCP, d, and F6 cross-linked to alpha and/or beta, but not to gamma or delta. The COOH-terminal half of A6L, which is extramembranous, cross-linked to d but not to any other stalk or F1 subunit. No cross-links of subunits a and c with any stalk or F1 subunits were detected. In F1-deficient SMP, cross-linked b+b and d+F6 dimers appeared, and the extent of cross-linking between b and OSCP diminished greatly. The addition of F1 to F1-deficient particles appeared to reverse these changes. Treatment of F1-deficient particles with trypsin rapidly hydrolyzed away OSCP and F6, fragmented b to membrane-bound 18-, 12-, and 8-9-kDa antigenic fragments, which cross-linked to d and/or with one another. Trypsin also removed the COOH-terminal part of A6L, but the remainder still cross-linked to subunit d. Models showing the near neighbor relationships of the stalk subunits with one another and with the alpha and beta subunits at a level near the proximal end (bottom) of F1 and at the membrane-matrix interface are presented.

Synthesis of a self-contained concept of the molecular mechanism of energy interconversion by H(+)-transporting ATP synthase

The original aim of the review has been to probe into the validity of the paradigm on the high energy-carrier function of ATP. It seemed to be called into question on the basis of findings with H(+)-transporting ATP synthase suggesting the formation of ATP from ADP and Pi without energy input. Thus, ATP appeared as a low-energy compound. Starting from the current, rich knowledge of the molecular structure and the inviting thinking on the mechanism of H(+)-transporting ATP synthase, we have endeavoured to freshly interpret and integrate the pertinent observations in the light of the comprehensively derived model of the molecular mechanism of energy interconversion by Na+/K(+)-transporting ATPase. In this way, we have uncovered the common mechanistic elements of the two energy-interconverting enzymes. The emerging purpose of the present paper has been the 'synthesis' of a self-contained concept of the molecular mechanism of the interconversion of electrochemical and chemical Gibbs energies by H(+)-transporting ATP synthase. The outcome is reflected in the following tentative evaluations. 1. In ATP hydrolysis, the great Gibbs energy change which is observed in solution, is largely conserved by the F1 sector of ATP synthase as mechanical Gibbs energy in the enzyme's protein fabric, so that it can be utilized in the resynthesis of ATP from enzyme-bound ADP and Pi. The plainly measured low Gibbs energy change results from large compensating enthalpy and entropy changes that reflect the underlying changes in protein conformation. 2. In stoichiometric ATP synthesis by F1 sector from ADP and Pi bound to the catalytic centre, their intrinsic binding energy brings about a loss of peptide chain entropy that makes possible an entropy-driven ATP formation. 3. The driving force for ATP synthesis cannot be the high Gibbs energy change on binding of product ATP; the tight ATP-enzyme complex rather is a low Gibbs energy intermediate from which escape is difficult. 4. The catalytic centre exists either in an open state unable to firmly bind the substrate-product couple, or in a closed state protecting formed ATP from facile hydrolysis by ambient water. 5. The cleft closure, induced by binding of Pi and ADP or ATP, does not necessarily need external energy supply, because the cleft closure proceeds from rigid domain rotations which can occur rather spontaneously. In further analogy to adenylate kinase, the driving force of this domain movement presumably comes from the electrostatic interactions between phosphate moieties and arginine side chains in the catalytic centre.(ABSTRACT TRUNCATED AT 400 WORDS)

A model for the catalytic site of F1-ATPase based on analogies to nucleotide-binding domains of known structure

An updated topological model is constructed for the catalytic nucleotide-binding site of the F1-ATPase. The model is based on analogies to the known structures of the MgATP site on adenylate kinase and the guanine nucleotide sites on elongation factor Tu (Ef-Tu) and the ras p21 protein. Recent studies of these known nucleotide-binding domains have revealed several common functional features and similar alignment of nucleotide in their binding folds, and these are used as a framework for evaluating results of affinity labeling and mutagenesis studies of the beta subunit of F1. Several potentially important residues on beta are noted that have not yet been studied by mutagenesis or affinity labeling.

Catalytic sites of Escherichia coli F1-ATPase

The catalytic site of Escherichia coli F1-ATPase is reviewed in terms of structure and function. Structural prediction, biochemical analyses, and mutagenesis experiments suggest that the catalytic site is formed primarily by residues 137-335 of beta-subunit. Subdomains of the site involved in phosphate-bond cleavage/synthesis and adenine-ring binding are discussed. Ambiguities inherent in steady-state catalytic measurements due to catalytic site cooperativity are discussed, and the advantages of pre-steady-state ("unisite") techniques are emphasized. The emergence of a single high-affinity catalytic site occurs as a result of F1-oligomer assembly. Measurements of unisite catalysis rate and equilibrium constants, and their modulation by varied pH, dimethylsulfoxide, and mutations, are described and conclusions regarding the nature of the high-affinity catalytic site and mechanism of catalysis are presented.

Quaternary structure of ATP synthases: symmetry and asymmetry in the F1 moiety

It has been proposed that during ATP synthesis/hydrolysis F1 ATPases experience a complex pattern of nucleotide binding and release during the catalytic cycle (binding change mechanism). This type of mechanism has implications that can be correlated with the structure of the enzyme. F1-ATPases (stoichiometry alpha 3 beta 3 gamma delta epsilon) are essentially a symmetrical trimer of pairs of the major subunits (alpha and beta); the minor subunits (gamma, delta and epsilon) are in single copies and interact with the trimer in an asymmetrical fashion. The asymmetry introduced by the minor subunits has important structural and functional consequences: (1) it introduces differences between the potentially equivalent binding and catalytic sites in the major subunits, (2) it restricts the ways in which a binding change mechanism can occur, and (3) it governs the way in which the F1 interacts with the (asymmetrical) F0 sector.

Characterization of Escherichia coli ATP synthase beta-subunit mutations using a chromosomal deletion strain

(1) We constructed Escherichia coli strain JP17 with a deletion in the ATP synthase beta-subunit gene. JP17 is completely deficient in ATP synthase activity and expresses no beta-subunit. Expression of normal beta-subunit from a plasmid restores haploid levels of ATP synthase in membranes. JP17 was shown to be efficacious for studies of beta-subunit mutations. Site-directed mutants were studied directly in JP17. Randomly generated chromosomal mutants were identified by PCR and DNA sequencing, cloned, and expressed in JP17. (2) Eight novel mutations occurring within the putative catalytic nucleotide-binding domain were characterized with respect to their effects on catalysis and structure. The mutations beta C137S, beta G152D, beta G152R, beta E161Q, beta E161R, and beta G251D each impaired catalysis without affecting enzyme assembly or oligomeric structure and are of interest for future studies of catalytic mechanism. The mutations beta D301V and beta D302V, involving strongly conserved carboxyl residues, caused oligomeric instability of F1. However, growth characteristics of these mutants suggested that neither carboxyl side chain is critical for catalysis. (3) The mutations beta R398C and beta R398W rendered ATP synthase resistant to aurovertin, giving strong support to the view that beta R398 is a key residue in the aurovertin-binding site. Neither beta R398C or beta R398W impaired catalysis significantly.

Heterogeneous hydrolysis of substoichiometric ATP by the F1-ATPase from Escherichia coli

The hydrolysis of 0.3 microM [alpha,gamma-32P]ATP by 1 microM F1-ATPase isolated from the plasma membranes of Escherichia coli has been examined in the presence and absence of inorganic phosphate. The rate of binding of substoichiometric substrate to the ATPase is attenuated by 2 mM phosphate and further attenuated by 50 mM phosphate. Under all conditions examined, only 10-20% of the [alpha,gamma-32P]ATP that bound to the enzyme was hydrolyzed sufficiently slowly to be examined in cold chase experiments with physiological concentrations of non-radioactive ATP. These features differ from those observed with the mitochondrial F1-ATPase. The amount of bound substrate in equilibrium with bound products observed in the slow phase which was subject to promoted hydrolysis by excess ATP was not affected by the presence of phosphate. Comparison of the fluxes of enzyme-bound species detected experimentally in the presence of 2 mM phosphate with those predicted by computer simulation of published rate constants determined for uni-site catalysis (Al-Shawi, M.D., Parsonage, D. and Senior, A.E. (1989) J. Biol. Chem. 264, 15376-15383) showed that hydrolysis of substoichiometric ATP observed experimentally was clearly biphasic. Less than 20% of the substoichiometric ATP added to the enzyme was hydrolyzed according to the published rate constants which were calculated from the slow phase of product release in the presence of 1 mM phosphate. The majority of the substoichiometric ATP added to the enzyme was hydrolyzed with product release that was too rapid to be detected by the methods employed in this study, indicating again that the F1-ATPase from E. coli and bovine heart mitochondria hydrolyze substoichiometric ATP differently.

Catalytic site nucleotide and inorganic phosphate dependence of the conformation of the epsilon subunit in Escherichia coli adenosinetriphosphatase

The rate of trypsin cleavage of the epsilon subunit of Escherichia coli F1 (ECF1) has been found to be ligand-dependent, as measured indirectly by the activation of the enzyme that occurs on protease digestion, or when followed directly by monitoring the cleavage of this subunit using monoclonal antibodies. The cleavage of the epsilon subunit was fast in the presence of ADP alone, ADP + MG2+, ATP + EDTA, or AMP-PNP, but slow when Pi was added along with ADP + Mg2+ or when ATP + Mg2+ was added to generate ADP + Pi (+Mg2+) in the catalytic site(s). The half-maximal concentration of Pi required in the presence of ADP + Mg2+ to protect the epsilon subunit from cleavage by trypsin was 50 microM, which is in the range measured for the high-affinity binding of Pi to F1. The ligand-dependent conformational changes in the epsilon subunit were also examined in cross-linking experiments using the water-soluble carbodiimide 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC). In the presence of ATP + Mg2+ or ADP + Mg2+ + Pi, the epsilon subunit cross-linked to beta in high yield. With ATP + EDTA or ADP + Mg2+ (no Pi), the yield of the beta-epsilon cross-linked product was much reduced. We conclude that the epsilon subunit undergoes a conformational change dependent on the presence of Pi. It has been found previously that binding of the epsilon subunit to ECF1 inhibits ATPase activity by decreasing the off rate of Pi [Dunn, S. D., Zadorozny, V. D., Tozer, R. G., & Orr, L. E. (1987) Biochemistry 26, 4488-4493]. This reciprocal relationship between Pi binding and epsilon-subunit conformation has important implications for energy transduction by the E. coli ATP synthase.