The dnaB-dnaC replication protein complex of Escherichia coli

Diverse Mechanisms of Helicase Loading during DNA Replication Initiation in Bacteria

Initiation of DNA replication is required for cell viability and passage of genetic information to the next generation. Studies in Escherichia coli and Bacillus subtilis have established ATPases associated with diverse cellular activities (AAA+) as essential proteins required for loading of the replicative helicase at replication origins. AAA+ ATPases DnaC in E. coli and DnaI in B. subtilis have long been considered the paradigm for helicase loading during replication in bacteria. Recently, it has become increasingly clear that most bacteria lack DnaC/DnaI homologs. Instead, most bacteria express a protein homologous to the newly described DciA (dnaC/dnaI antecedent) protein. DciA is not an ATPase, and yet it serves as a helicase operator, providing a function analogous to that of DnaC and DnaI across diverse bacterial species. The recent discovery of DciA and of other alternative mechanisms of helicase loading in bacteria has changed our understanding of DNA replication initiation. In this review, we highlight recent discoveries, detailing what is currently known about the replicative helicase loading process across bacterial species, and we discuss the critical questions that remain to be investigated.

Structural insight into replicative helicase loading in Escherichia coli

DNA replication is an essential, precisely regulated process that occurs once in a cell cycle. In the Gram-negative bacterium Escherichia coli, the replicative helicase EcDnaB and the helicase loader EcDnaC play key roles in the initiation step at the replication origin, oriC. EcDnaB and EcDnaC form a heterododecamer, in which hexameric EcDnaB is bound to hexameric EcDnaC. Using genetic, biochemical, and structural biology approaches, many groups have probed the mechanism of replicative helicase loading, using helicases and helicase loaders from various species. Recent X-ray crystallography and cryo-EM structural studies of the EcDnaB-EcDnaC complex revealed that the interaction of DnaC with DnaB triggers distortion accumulation on the closed ring of hexameric DnaB, inducing DnaB subunits to adopt the open helical form for replication progression. The high-resolution crystal structure of the DnaB-DnaC complex solved by Nagata et al. contributed to a better understanding of the conformational rearrangement of the DnaB ring. In addition to the structural alterations in DnaB subunits by DnaC, the binding of single stranded DNA (ssDNA) substrates alters the ATP- and ADP-bound forms of DnaB and DnaC. These studies have proposed mechanisms by which DnaC regulates helicase loading onto ssDNA.

A nucleotide-dependent oligomerization of the Escherichia coli replication initiator DnaA requires residue His136 for remodeling of the chromosomal origin

Escherichia coli replication initiator protein DnaA binds ATP with high affinity but the amount of ATP required to initiate replication greatly exceeds the amount required for binding. Previously, we showed that ATP-DnaA, not ADP-DnaA, undergoes a conformational change at the higher nucleotide concentration, which allows DnaA oligomerization at the replication origin but the association state remains unclear. Here, we used Small Angle X-ray Scattering (SAXS) to investigate oligomerization of DnaA in solution. Whereas ADP-DnaA was predominantly monomeric, AMP–PNP–DnaA (a non-hydrolysable ATP-analog bound-DnaA) was oligomeric, primarily dimeric. Functional studies using DnaA mutants revealed that DnaA(H136Q) is defective in initiating replication in vivo. The mutant retains high-affinity ATP binding, but was defective in producing replication-competent initiation complexes. Docking of ATP on a structure of E. coli DnaA, modeled upon the crystallographic structure of Aquifex aeolicus DnaA, predicts a hydrogen bond between ATP and imidazole ring of His136, which is disrupted when Gln is present at position 136. SAXS performed on AMP–PNP–DnaA (H136Q) indicates that the protein has lost its ability to form oligomers. These results show the importance of high ATP in DnaA oligomerization and its dependence on the His136 residue.

Single-molecule live cell imaging of Rep reveals the dynamic interplay between an accessory replicative helicase and the replisome

DNA replication must cope with nucleoprotein barriers that impair efficient replisome translocation. Biochemical and genetic studies indicate accessory helicases play essential roles in replication in the presence of nucleoprotein barriers, but how they operate inside the cell is unclear. With high-speed single-molecule microscopy we observed genomically-encoded fluorescent constructs of the accessory helicase Rep and core replisome protein DnaQ in live Escherichia coli cells. We demonstrate that Rep colocalizes with 70% of replication forks, with a hexameric stoichiometry, indicating maximal occupancy of the single DnaB hexamer. Rep associates dynamically with the replisome with an average dwell time of 6.5 ms dependent on ATP hydrolysis, indicating rapid binding then translocation away from the fork. We also imaged PriC replication restart factor and observe Rep-replisome association is also dependent on PriC. Our findings suggest two Rep-replisome populations in vivo: one continually associating with DnaB then translocating away to aid nucleoprotein barrier removal ahead of the fork, another assisting PriC-dependent reloading of DnaB if replisome progression fails. These findings reveal how a single helicase at the replisome provides two independent ways of underpinning replication of protein-bound DNA, a problem all organisms face as they replicate their genomes.

Crystal structure of the complex of the interaction domains of Escherichia coli DnaB helicase and DnaC helicase loader: structural basis implying a distortion-accumulation mechanism for the DnaB ring opening caused by DnaC binding

Loading the bacterial replicative helicase DnaB onto DNA requires a specific loader protein, DnaC/DnaI, which creates the loading-competent state by opening the DnaB hexameric ring. To understand the molecular mechanism by which DnaC/DnaI opens the DnaB ring, we solved 3.1-Å co-crystal structure of the interaction domains of Escherichia coli DnaB-DnaC. The structure reveals that one N-terminal domain (NTD) of DnaC interacts with both the linker helix of a DnaB molecule and the C-terminal domain (CTD) of the adjacent DnaB molecule by forming a three α-helix bundle, which fixes the relative orientation of the two adjacent DnaB CTDs. The importance of the intermolecular interface in the crystal structure was supported by the mutational data of DnaB and DnaC. Based on the crystal structure and other available information on DnaB-DnaC structures, we constructed a molecular model of the hexameric DnaB CTDs bound by six DnaC NTDs. This model suggested that the binding of a DnaC would cause a distortion in the hexameric ring of DnaB. This distortion of the DnaB ring might accumulate by the binding of up to six DnaC molecules, resulting in the DnaB ring to open.

Physical Basis for the Loading of a Bacterial Replicative Helicase onto DNA

In cells, dedicated AAA+ ATPases deposit hexameric, ring-shaped helicases onto DNA to initiate chromosomal replication. To better understand the mechanisms by which helicase loading can occur, we used cryo-EM to determine sub-4-Å-resolution structures of the E. coli DnaB⋅DnaC helicase⋅loader complex with nucleotide in pre- and post-DNA engagement states. In the absence of DNA, six DnaC protomers latch onto and crack open a DnaB hexamer using an extended N-terminal domain, stabilizing this conformation through nucleotide-dependent ATPase interactions. Upon binding DNA, DnaC hydrolyzes ATP, allowing DnaB to isomerize into a topologically closed, pre-translocation state competent to bind primase. Our data show how DnaC opens the DnaB ring and represses the helicase prior to DNA binding and how DnaC ATPase activity is reciprocally regulated by DnaB and DNA. Comparative analyses reveal how the helicase loading mechanism of DnaC parallels and diverges from homologous AAA+ systems involved in DNA replication and transposition.

Mechanisms of opening and closing of the bacterial replicative helicase

Assembly of bacterial ring-shaped hexameric replicative helicases on single-stranded (ss) DNA requires specialized loading factors. However, mechanisms implemented by these factors during opening and closing of the helicase, which enable and restrict access to an internal chamber, are not known. Here, we investigate these mechanisms in the Escherichia coli DnaB helicase•bacteriophage λ helicase loader (λP) complex. We show that five copies of λP bind at DnaB subunit interfaces and reconfigure the helicase into an open spiral conformation that is intermediate to previously observed closed ring and closed spiral forms; reconfiguration also produces openings large enough to admit ssDNA into the inner chamber. The helicase is also observed in a restrained inactive configuration that poises it to close on activating signal, and transition to the translocation state. Our findings provide insights into helicase opening, delivery to the origin and ssDNA entry, and closing in preparation for translocation.

The Macromolecular Machines that Duplicate the Escherichia coli Chromosome as Targets for Drug Discovery

DNA replication is an essential process. Although the fundamental strategies to duplicate chromosomes are similar in all free-living organisms, the enzymes of the three domains of life that perform similar functions in DNA replication differ in amino acid sequence and their three-dimensional structures. Moreover, the respective proteins generally utilize different enzymatic mechanisms. Hence, the replication proteins that are highly conserved among bacterial species are attractive targets to develop novel antibiotics as the compounds are unlikely to demonstrate off-target effects. For those proteins that differ among bacteria, compounds that are species-specific may be found. Escherichia coli has been developed as a model system to study DNA replication, serving as a benchmark for comparison. This review summarizes the functions of individual E. coli proteins, and the compounds that inhibit them.

Mechanisms of bacterial DNA replication restart

Multi-protein DNA replication complexes called replisomes perform the essential process of copying cellular genetic information prior to cell division. Under ideal conditions, replisomes dissociate only after the entire genome has been duplicated. However, DNA replication rarely occurs without interruptions that can dislodge replisomes from DNA. Such events produce incompletely replicated chromosomes that, if left unrepaired, prevent the segregation of full genomes to daughter cells. To mitigate this threat, cells have evolved 'DNA replication restart' pathways that have been best defined in bacteria. Replication restart requires recognition and remodeling of abandoned replication forks by DNA replication restart proteins followed by reloading of the replicative DNA helicase, which subsequently directs assembly of the remaining replisome subunits. This review summarizes our current understanding of the mechanisms underlying replication restart and the proteins that drive the process in Escherichia coli (PriA, PriB, PriC and DnaT).

ATPase activity measurement of DNA replicative helicase from Bacillus stearothermophilus by malachite green method

The DnaB helicase from Bacillus stearothermophilus (DnaBBst) was a model protein for studying the bacterial DNA replication. In this work, a non-radioactive method for measuring ATPase activity of DnaBBst helicase was described. The working parameters and conditions were optimized. Furthermore, this method was applied to investigate effects of DnaG primase, ssDNA and helicase loader protein (DnaI) on ATPase activity of DnaBBst. Our results showed this method was sensitive and efficient. Moreover, it is suitable for the investigation of functional interaction between DnaB and related factors.

Characterization of newly identified DnaA and DnaB proteins from Acetobacter

Although chromosomal replication is an essential feature of the bacterial life cycle, the replication mechanism and involved molecular players have never been properly characterized in the Acetobacter genera. Thanks to whole-genome sequencing, the unknown replication proteins from Acetobacter pasteurianus and Acetobacter orleanensis, DnaA-like and DnaB-like, could be identified. Despite the low nucleotide or amino acid similarity to the respective orthologs from Escherichia coli, their involvement during replication regulation was corroborated by artificial microRNA. In the Acetobacter genome, a novel replication origin, oriAo, was detected with three 9-nucleotide-long DnaA boxes to which DnaA-like proteins bind actively. Bacterial two-hybrid systems and co-immunoprecipitation confirmed the homologous and heterologous interactions between DnaA-like and DnaB-like proteins with their E. coli orthologs. This communication is due to the conserved tryptophan at position 6 for E. coli or 25 for Acetobacter that unables DnaA-like proteins to form oligomeric protein structures after its substitution. Altogether, these results provide novel insights into the genome replication mechanism in Acetobacter.

Structure and Function of the PriC DNA Replication Restart Protein

Collisions between DNA replication complexes (replisomes) and barriers such as damaged DNA or tightly bound protein complexes can dissociate replisomes from chromosomes prematurely. Replisomes must be reloaded under these circumstances to avoid incomplete replication and cell death. Bacteria have evolved multiple pathways that initiate DNA replication restart by recognizing and remodeling abandoned replication forks and reloading the replicative helicase. In vitro, the simplest of these pathways is mediated by the single-domain PriC protein, which, along with the DnaC helicase loader, can load the DnaB replicative helicase onto DNA bound by the single-stranded DNA (ssDNA)-binding protein (SSB). Previous biochemical studies have identified PriC residues that mediate interactions with ssDNA and SSB. However, the mechanisms by which PriC drives DNA replication restart have remained poorly defined due to the limited structural information available for PriC. Here, we report the NMR structure of full-length PriC from Cronobacter sakazakii PriC forms a compact bundle of α-helices that brings together residues involved in ssDNA and SSB binding at adjacent sites on the protein surface. Disruption of these interaction sites and of other conserved residues leads to decreased DnaB helicase loading onto SSB-bound DNA. We also demonstrate that PriC can directly interact with DnaB and the DnaB·DnaC complex. These data lead to a model in which PriC acts as a scaffold for recruiting DnaB·DnaC to SSB/ssDNA sites present at stalled replication forks.

Replication Initiation in Bacteria

The initiation of chromosomal DNA replication starts at a replication origin, which in bacteria is a discrete locus that contains DNA sequence motifs recognized by an initiator protein whose role is to assemble the replication fork machinery at this site. In bacteria with a single chromosome, DnaA is the initiator and is highly conserved in all bacteria. As an adenine nucleotide binding protein, DnaA bound to ATP is active in the assembly of a DnaA oligomer onto these sites. Other proteins modulate DnaA oligomerization via their interaction with the N-terminal region of DnaA. Following the DnaA-dependent unwinding of an AT-rich region within the replication origin, DnaA then mediates the binding of DnaB, the replicative DNA helicase, in a complex with DnaC to form an intermediate named the prepriming complex. In the formation of this intermediate, the helicase is loaded onto the unwound region within the replication origin. As DnaC bound to DnaB inhibits its activity as a DNA helicase, DnaC must dissociate to activate DnaB. Apparently, the interaction of DnaB with primase (DnaG) and primer formation leads to the release of DnaC from DnaB, which is coordinated with or followed by translocation of DnaB to the junction of the replication fork. There, DnaB is able to coordinate its activity as a DNA helicase with the cellular replicase, DNA polymerase III holoenzyme, which uses the primers made by primase for leading strand DNA synthesis.

'Modulation of the enzymatic activities of replicative helicase (DnaB) by interaction with Hp0897: a possible mechanism for helicase loading in Helicobacter pylori'

DNA replication in Helicobacter pylori is initiated from a unique site (oriC) on its chromosome where several proteins assemble to form a functional replisome. The assembly of H. pylori replication machinery is similar to that of the model gram negative bacterium Escherichia coli except for the absence of DnaC needed to recruit the hexameric DnaB helicase at the replisome assembly site. In the absence of an obvious DnaC homologue in H. pylori, the question arises as to whether HpDnaB helicase is loaded at the Hp-replication origin by itself or is assisted by other unidentified protein(s). A high-throughput yeast two-hybrid study has revealed two proteins of unknown functions (Hp0897 and Hp0340) that interact with HpDnaB. Here we demonstrate that Hp0897 interacts with HpDnaB helicase in vitro as well as in vivo. Furthermore, the interaction stimulates the DNA binding activity of HpDnaB and modulates its adenosine triphosphate hydrolysis and helicase activities significantly. Prior complex formation of Hp0897 and HpDnaB enhances the binding/loading of DnaB onto DNA. Hp0897, along with HpDnaB, colocalizes with replication complex at initiation but does not move with the replisome during elongation. Together, these results suggest a possible role of Hp0897 in loading of HpDnaB at oriC.

Substitutions of Conserved Residues in the C-terminal Region of DnaC Cause Thermolability in Helicase Loading

The DnaB-DnaC complex binds to the unwound DNA within the Escherichia coli replication origin in the helicase loading process, but the biochemical events that lead to its stable binding are uncertain. This study characterizes the function of specific C-terminal residues of DnaC. Genetic and biochemical characterization of proteins bearing F231S and W233L substitutions of DnaC reveals that their activity is thermolabile. Because the mutants remain able to form a complex with DnaB at 30 and 37 °C, their thermolability is not explained by an impaired interaction with DnaB. Photo-cross-linking experiments and biosensor analysis show an altered affinity of these mutants compared with wild type DnaC for single-stranded DNA, suggesting that the substitutions affect DNA binding. Despite this difference, their activity in DNA binding is not thermolabile. The substitutions also drastically reduce the affinity of DnaC for ATP as measured by the binding of a fluorescent ATP analogue (MANT-ATP) and by UV cross-linking of radiolabeled ATP. Experiments show that an elevated temperature substantially inhibits both mutants in their ability to load the DnaB-DnaC complex at a DnaA box. Because a decreased ATP concentration exacerbates their thermolabile behavior, we suggest that the F231S and W233L substitutions are thermolabile in ATP binding, which correlates with defective helicase loading at an elevated temperature.

Initiation of DNA Replication

In recent years it has become clear that complex regulatory circuits control the initiation step of DNA replication by directing the assembly of a multicomponent molecular machine (the orisome) that separates DNA strands and loads replicative helicase at oriC, the unique chromosomal origin of replication. This chapter discusses recent efforts to understand the regulated protein-DNA interactions that are responsible for properly timed initiation of chromosome replication. It reviews information about newly identified nucleotide sequence features within Escherichia coli oriC and the new structural and biochemical attributes of the bacterial initiator protein DnaA. It also discusses the coordinated mechanisms that prevent improperly timed DNA replication. Identification of the genes that encoded the initiators came from studies on temperature-sensitive, conditional-lethal mutants of E. coli, in which two DNA replication-defective phenotypes, "immediate stop" mutants and "delayed stop" mutants, were identified. The kinetics of the delayed stop mutants suggested that the defective gene products were required specifically for the initiation step of DNA synthesis, and subsequently, two genes, dnaA and dnaC, were identified. The DnaA protein is the bacterial initiator, and in E. coli, the DnaC protein is required to load replicative helicase. Regulation of DnaA accessibility to oriC, the ordered assembly and disassembly of a multi-DnaA complex at oriC, and the means by which DnaA unwinds oriC remain important questions to be answered and the chapter discusses the current state of knowledge on these topics.

Choosing a suitable method for the identification of replication origins in microbial genomes

As the replication of genomic DNA is arguably the most important task performed by a cell and given that it is controlled at the initiation stage, the events that occur at the replication origin play a central role in the cell cycle. Making sense of DNA replication origins is important for improving our capacity to study cellular processes and functions in the regulation of gene expression, genome integrity in much finer detail. Thus, clearly comprehending the positions and sequences of replication origins which are fundamental to chromosome organization and duplication is the first priority of all. In view of such important roles of replication origins, tremendous work has been aimed at identifying and testing the specificity of replication origins. A number of computational tools based on various skew types have been developed to predict replication origins. Using various in silico approaches such as Ori-Finder, and databases such as DoriC, researchers have predicted the locations of replication origins sites for thousands of bacterial chromosomes and archaeal genomes. Based on the predicted results, we should choose an effective method for identifying and confirming the interactions at origins of replication. Here we describe the main existing experimental methods that aimed to determine the replication origin regions and list some of the many the practical applications of these methods.

DnaC traps DnaB as an open ring and remodels the domain that binds primase

Helicase loading at a DNA replication origin often requires the dynamic interactions between the DNA helicase and an accessory protein. In E. coli, the DNA helicase is DnaB and DnaC is its loading partner. We used the method of hydrogen/deuterium exchange mass spectrometry to address the importance of DnaB–DnaC complex formation as a prerequisite for helicase loading. Our results show that the DnaB ring opens and closes, and that specific amino acids near the N-terminus of DnaC interact with a site in DnaB's C-terminal domain to trap it as an open ring. This event correlates with conformational changes of the RecA fold of DnaB that is involved in nucleotide binding, and of the AAA+ domain of DnaC. DnaC also causes an alteration of the helical hairpins in the N-terminal domain of DnaB, presumably occluding this region from interacting with primase. Hence, DnaC controls the access of DnaB by primase.

Functional characterization of DnaB helicase and its modulation by single-stranded DNA binding protein in Mycobacterium tuberculosis

DnaB is important in the initiation and extension stages of DNA replication. Although DnaB has been studied in many bacterial species, its function in the devastating human pathogen Mycobacterium tuberculosis remains unclear. In this study, an intein-deleted form of M. tuberculosis DnaB (MtbDnaB) was cloned, expressed and characterized. MtbDnaB exhibited strong 5' to 3' helicase and ATPase activities, suggesting that MtbDnaB is a functional homolog of Escherichia coli DnaB. A physical interaction between MtbSSB (single-stranded binding protein of M. tuberculosis) and MtbDnaB was further identified in vivo and in vitro. The MtbSSB C-terminal fragment was found to have a critical function in this interaction. Moreover, the helicase activity of MtbDnaB was stimulated by MtbSSB at low concentrations and inhibited at high concentrations. An MtbSSB mutant with decreased binding affinity for ssDNA can stimulate the helicase activity of MtbDnaB over a wider concentration range than wild-type MtbSSB. These results suggest that MtbSSB assists in the loading of MtbDnaB on the DNA replication fork in M. tuberculosis.

Structure of a helicase-helicase loader complex reveals insights into the mechanism of bacterial primosome assembly

During the assembly of the bacterial loader-dependent primosome, helicase loader proteins bind to the hexameric helicase ring, deliver it onto the oriC DNA and then dissociate from the complex. Here, to provide a better understanding of this key process, we report the crystal structure of the ~570-kDa prepriming complex between the Bacillus subtilis loader protein and the Bacillus stearothermophilus helicase, as well as the helicase-binding domain of primase with a molar ratio of 6:6:3 at 7.5 Å resolution. The overall architecture of the complex exhibits a three-layered ring conformation. Moreover, the structure combined with the proposed model suggests that the shift from the 'open-ring' to the 'open-spiral' and then the 'closed-spiral' state of the helicase ring due to the binding of single-stranded DNA may be the cause of the loader release.

Genetic and biochemical assays reveal a key role for replication restart proteins in group II intron retrohoming

Mobile group II introns retrohome by an RNP-based mechanism in which the intron RNA reverse splices into a DNA site and is reverse transcribed by the associated intron-encoded protein. The resulting intron cDNA is then integrated into the genome by cellular mechanisms that have remained unclear. Here, we used an Escherichia coli genetic screen and Taqman qPCR assay that mitigate indirect effects to identify host factors that function in retrohoming. We then analyzed mutants identified in these and previous genetic screens by using a new biochemical assay that combines group II intron RNPs with cellular extracts to reconstitute the complete retrohoming reaction in vitro. The genetic and biochemical analyses indicate a retrohoming pathway involving degradation of the intron RNA template by a host RNase H and second-strand DNA synthesis by the host replicative DNA polymerase. Our results reveal ATP-dependent steps in both cDNA and second-strand synthesis and a surprising role for replication restart proteins in initiating second-strand synthesis in the absence of DNA replication. We also find an unsuspected requirement for host factors in initiating reverse transcription and a new RNA degradation pathway that suppresses retrohoming. Key features of the retrohoming mechanism may be used by human LINEs and other non-LTR-retrotransposons, which are related evolutionarily to mobile group II introns. Our findings highlight a new role for replication restart proteins, which function not only to repair DNA damage caused by mobile element insertion, but have also been co-opted to become an integral part of the group II intron retrohoming mechanism.

Mobile group II introns are bacterial retrotransposons that are evolutionarily related to introns and retroelements in higher organisms. They spread within and between genomes by a mechanism termed “retrohoming” in which the intron RNA inserts directly into a DNA site and is reverse transcribed by an intron-encoded reverse transcriptase. The resulting intron cDNA is integrated into the genome by host factors, but how it occurs has remained unclear. Here, we investigated the function of host factors in retrohoming by genetic and biochemical approaches, including a new biochemical assay that reconstitutes the complete retrohoming reaction in vitro. Our results lead to a comprehensive model for retrohoming, which includes a surprising role for replication restart proteins in recruiting the host replicative DNA polymerase to copy the intron cDNA into the genome in the absence of DNA replication. We also find an unexpected contribution of host factors to initiating reverse transcription and a new RNA degradation pathway that suppresses retrohoming. We suggest that key features of the group II intron retrohoming mechanism may be used by human LINE elements and other non-LTR-retrotransposons. Additionally, our results provide new insights into the function of replication restart proteins, which are critical for surviving DNA damage in all organisms.

Loading and activation of DNA replicative helicases: the key step of initiation of DNA replication

Evolution has led to diversification of all living organisms from a common ancestor. Consequently, all living organisms use a common method to duplicate their genetic information and thus pass on their inherited traits to their offspring. To duplicate chromosomal DNA, double-stranded DNA must first be unwound by helicase, which is loaded to replication origins and activated during the DNA replication initiation step. In this review, we discuss the common features of, and differences in, replicative helicases between prokaryotes and eukaryotes.

Replication initiation at the Escherichia coli chromosomal origin

To initiate DNA replication, DnaA recognizes and binds to specific sequences within the Escherichia coli chromosomal origin (oriC), and then unwinds a region within oriC. Next, DnaA interacts with DnaB helicase in loading the DnaB-DnaC complex on each separated strand. Primer formation by primase (DnaG) induces the dissociation of DnaC from DnaB, which involves the hydrolysis of ATP bound to DnaC. Recent evidence indicates that DnaC acts as a checkpoint in the transition from initiation to the elongation stage of DNA replication. Freed from DnaC, DnaB helicase unwinds the parental duplex DNA while interacting the cellular replicase, DNA polymerase III holoenzyme, and primase as it intermittently forms primers that are extended by the replicase in duplicating the chromosome.

Structural analysis of bacteriophage T4 DNA replication: a review in the Virology Journal series on bacteriophage T4 and its relatives

The bacteriophage T4 encodes 10 proteins, known collectively as the replisome, that are responsible for the replication of the phage genome. The replisomal proteins can be subdivided into three activities; the replicase, responsible for duplicating DNA, the primosomal proteins, responsible for unwinding and Okazaki fragment initiation, and the Okazaki repair proteins. The replicase includes the gp43 DNA polymerase, the gp45 processivity clamp, the gp44/62 clamp loader complex, and the gp32 single-stranded DNA binding protein. The primosomal proteins include the gp41 hexameric helicase, the gp61 primase, and the gp59 helicase loading protein. The RNaseH, a 5' to 3' exonuclease and T4 DNA ligase comprise the activities necessary for Okazaki repair. The T4 provides a model system for DNA replication. As a consequence, significant effort has been put forth to solve the crystallographic structures of these replisomal proteins. In this review, we discuss the structures that are available and provide comparison to related proteins when the T4 structures are unavailable. Three of the ten full-length T4 replisomal proteins have been determined; the gp59 helicase loading protein, the RNase H, and the gp45 processivity clamp. The core of T4 gp32 and two proteins from the T4 related phage RB69, the gp43 polymerase and the gp45 clamp are also solved. The T4 gp44/62 clamp loader has not been crystallized but a comparison to the E. coli gamma complex is provided. The structures of T4 gp41 helicase, gp61 primase, and T4 DNA ligase are unknown, structures from bacteriophage T7 proteins are discussed instead. To better understand the functionality of T4 DNA replication, in depth structural analysis will require complexes between proteins and DNA substrates. A DNA primer template bound by gp43 polymerase, a fork DNA substrate bound by RNase H, gp43 polymerase bound to gp32 protein, and RNase H bound to gp32 have been crystallographically determined. The preparation and crystallization of complexes is a significant challenge. We discuss alternate approaches, such as small angle X-ray and neutron scattering to generate molecular envelopes for modeling macromolecular assemblies.

Primase directs the release of DnaC from DnaB

An AAA+ ATPase, DnaC, delivers DnaB helicase at the E. coli chromosomal origin by a poorly understood process. This report shows that mutant proteins bearing alanine substitutions for two conserved arginines in a motif named box VII are defective in DNA replication, but this deficiency does not arise from impaired interactions with ATP, DnaB, or single-stranded DNA. Despite their ability to deliver DnaB to the chromosomal origin to form the prepriming complex, this intermediate is inactive. Quantitative analysis of the prepriming complex suggests that the DnaB-DnaC complex contains three DnaC monomers per DnaB hexamer and that the interaction of primase with DnaB and primer formation triggers the release of DnaC, but not the mutants, from DnaB. The interaction of primase with DnaB and the release of DnaC mark discrete events in the transition from initiation to the elongation stage of DNA replication.

Rep provides a second motor at the replisome to promote duplication of protein-bound DNA

Nucleoprotein complexes present challenges to genome stability by acting as potent blocks to replication. One attractive model of how such conflicts are resolved is direct targeting of blocked forks by helicases with the ability to displace the blocking protein-DNA complex. We show that Rep and UvrD each promote movement of E. coli replisomes blocked by nucleoprotein complexes in vitro, that such an activity is required to clear protein blocks (primarily transcription complexes) in vivo, and that a polarity of translocation opposite that of the replicative helicase is critical for this activity. However, these two helicases are not equivalent. Rep but not UvrD interacts physically and functionally with the replicative helicase. In contrast, UvrD likely provides a general means of protein-DNA complex turnover during replication, repair, and recombination. Rep and UvrD therefore provide two contrasting solutions as to how organisms may promote replication of protein-bound DNA.

DNA structure specificity conferred on a replicative helicase by its loader

Prokaryotic and eukaryotic replicative helicases can translocate along single-stranded and double-stranded DNA, with the central cavity of these multimeric ring helicases being able to accommodate both forms of DNA. Translocation by such helicases along single-stranded DNA results in the unwinding of forked DNA by steric exclusion and appears critical in unwinding of parental strands at the replication fork, whereas translocation over double-stranded DNA has no well-defined role. We have found that the accessory factor, DnaC, that promotes loading of the Escherichia coli replicative helicase DnaB onto single-stranded DNA may also act to confer DNA structure specificity on DnaB helicase. When present in excess, DnaC inhibits DnaB translocation over double-stranded DNA but not over single-stranded DNA. Inhibition of DnaB translocation over double-stranded DNA requires the ATP-bound form of DnaC, and this inhibition is relieved during translocation over single-stranded DNA indicating that stimulation of DnaC ATPase is responsible for this DNA structure specificity. These findings demonstrate that DnaC may provide the DNA structure specificity lacking in DnaB, limiting DnaB translocation to bona fide replication forks. The ability of other replicative helicases to translocate along single-stranded and double-stranded DNA raises the possibility that analogous regulatory mechanisms exist in other organisms.

Molecular interplay between the replicative helicase DnaC and its loader protein DnaI from Geobacillus kaustophilus

Helicase loading factors are thought to transfer the hexameric ring-shaped helicases onto the replication fork during DNA replication. However, the mechanism of helicase transfer onto DNA remains unclear. In Bacillus subtilis, the protein DnaI, which belongs to the AAA+ family of ATPases, is responsible for delivering the hexameric helicase DnaC onto DNA. Here we investigated the interaction between DnaC and DnaI from Geobacillus kaustophilus HTA426 (GkDnaC and GkDnaI, respectively) and determined that GkDnaI forms a stable complex with GkDnaC with an apparent stoichiometry of GkDnaC(6)-GkDnaI(6) in the absence of ATP. Surface plasmon resonance analysis indicated that GkDnaI facilitates loading of GkDnaC onto single-stranded DNA (ssDNA) and supports complex formation with ssDNA in the presence of ATP. Additionally, the GkDnaI C-terminal AAA+ domain alone could bind ssDNA, and binding was modulated by nucleotides. We also determined the crystal structure of the C-terminal AAA+ domain of GkDnaI in complex with ADP at 2.5 A resolution. The structure not only delineates the binding of ADP in the expected Walker A and B motifs but also reveals a positively charged region that may be involved in ssDNA binding. These findings provide insight into the mechanism of replicative helicase loading onto ssDNA.

Escherichia coli DnaB helicase-DnaC protein complex: allosteric effects of the nucleotides on the nucleic acid binding and the kinetic mechanism of NTP hydrolysis. 3

Allosteric interactions between the DNA- and NTP-binding sites of the Escherichia coli DnaB helicase engaged in the DnaB-DnaC complex and the mechanism of NTP hydrolysis by the complex have been examined using the fluorescence titration, analytical ultracentrifugation, and rapid quench-flow technique. Surprisingly, the ssDNA affinity of the DnaB-DnaC complex is independent of the structure of the phosphate group of the cofactor bound to the helicase. Thus, the DnaC protein eliminates the antagonistic allosteric effect of NTP and NDP on the ssDNA affinity of the enzyme. The protein changes the engagement of the DNA-binding subsites of the helicase in interactions with the nucleic acid, depending on the structure of the phosphate group of the present nucleotide cofactor and profoundly affects the structure of the bound DNA. Moreover, the ssDNA affinity of the helicase in the DnaB-DnaC complex is under the control of the nucleotide-binding site of the DnaC protein. The protein does not affect the NTP hydrolysis mechanism of the helicase. Nevertheless, the rate of the chemical step is diminished in the DnaB-DnaC complex. In the tertiary DnaB-DnaC-ssDNA complex, the ssDNA changes the internal dynamics between intermediates of the pyrimidine cofactor, in a manner independent of the base composition of the DNA, while the hydrolysis step of the purine cofactor is specifically stimulated by the homoadenosine ssDNA. The significance of these results for functional activities of the DnaB-DnaC complex is discussed.

Interactions of the Escherichia coli DnaB-DnaC protein complex with nucleotide cofactors. 1. Allosteric conformational transitions of the complex

Interactions of nucleotide cofactors with both protein components of the Escherichia coli DnaB helicase complex with the replication factor, the DnaC protein, have been examined using MANT-nucleotide analogues. At saturation, in all examined stationary complexes, including the binary, DnaB-DnaC, and tertiary, DnaB-DnaC-ssDNA, complexes, the helicase binds six cofactor molecules. Thus, protein-protein and protein-DNA interactions do not affect the maximum stoichiometry of the helicase-nucleotide interactions. The single-stranded DNA dramatically increases the ATP analogue affinity, while it has little effect on the affinity of the NDP analogues, indicating that stationary complexes reflect allosteric interactions between the DNA- and NTP-binding site prior to the cofactor hydrolysis step and subsequent to product release. In the binary complex, the DnaC protein diminishes the intrinsic affinity and increases the negative cooperativity in the cofactor binding to the helicase; an opposite effect of the protein on the cofactor-helicase interactions occurs in the tertiary complex. The DnaC protein retains its nucleotide binding capability in the binary and tertiary complexes with the helicase. Surprisingly, the DnaC protein-nucleotide interactions, in the binary and tertiary complexes, are characterized by positive cooperativity. The DnaC assembles on the helicase as a hexamer, which exists in two conformational states and undergoes an allosteric transition, induced by the cofactor. Cooperativity of the allosteric transition depends on the structure of the phosphate group of the nucleotide. The significance of the results for the DnaB-DnaC complex activities is discussed.

Motors, switches, and contacts in the replisome

Replisomes are the protein assemblies that replicate DNA. They function as molecular motors to catalyze template-mediated polymerization of nucleotides, unwinding of DNA, the synthesis of RNA primers, and the assembly of proteins on DNA. The replisome of bacteriophage T7 contains a minimum of proteins, thus facilitating its study. This review describes the molecular motors and coordination of their activities, with emphasis on the T7 replisome. Nucleotide selection, movement of the polymerase, binding of the processivity factor, unwinding of DNA, and RNA primer synthesis all require conformational changes and protein contacts. Lagging-strand synthesis is mediated via a replication loop whose formation and resolution is dictated by switches to yield Okazaki fragments of discrete size. Both strands are synthesized at identical rates, controlled by a molecular brake that halts leading-strand synthesis during primer synthesis. The helicase serves as a reservoir for polymerases that can initiate DNA synthesis at the replication fork. We comment on the differences in other systems where applicable.

DnaA structure, function, and dynamics in the initiation at the chromosomal origin

Escherichia coli DnaA is the initiator of chromosomal replication. Multiple ATP-DnaA molecules assemble at the oriC replication origin in a highly regulated manner, and the resultant initiation complexes promote local duplex unwinding within oriC, resulting in open complexes. DnaB helicase is loaded onto the unwound single-stranded region within oriC via interaction with the DnaA multimers. The tertiary structure of the functional domains of DnaA has been determined and several crucial residues in the initiation process, as well as their unique functions, have been identified. These include specific DNA binding, inter-DnaA interaction, specific and regulatory interactions with ATP and with the unwound single-stranded oriC DNA, and functional interaction with DnaB helicase. An overall structure of the initiation complex is also proposed. These are important for deepening our understanding of the molecular mechanisms that underlie DnaA assembly, oriC duplex unwinding, regulation of the initiation reaction, and DnaB helicase loading. In this review, we summarize recent progress on the molecular mechanisms of the functions of DnaA on oriC. In addition, some members of the AAA+ protein family related to the initiation of replication and its regulation (e.g., DnaA) are briefly discussed.

Cdt1 forms a complex with the minichromosome maintenance protein (MCM) and activates its helicase activity

Mcm4/6/7 forms a complex possessing DNA helicase activity, suggesting that Mcm may be a central component for the replicative helicase. Although Cdt1 is known to be essential for loading of Mcm onto the chromatin, its precise role in pre-RC formation and replication initiation is unknown. Using purified proteins, we show that Cdt1 forms a complex with Mcm4/6/7, Mcm2/3/4/5/6/7, and Mcm2/4/6/7 in glycerol gradient fractionation through interaction with Mcm2 and Mcm4/6. In the glycerol gradient fractionation, Mcm4/6/7-Cdt1 forms a complex (speculated to be a (Mcm4/6/7)2-Cdt13 assembly) in the presence of ATP, which is significantly larger than the Mcm4/6/7-Cdt1 complex generated in its absence. Furthermore, DNA binding and helicase activities of Mcm4/6/7 are significantly stimulated by Cdt1 protein in vitro. We generated a Cdt1 mutant, which fails to stimulate DNA binding and helicase activities of Mcm4/6/7. This mutant Cdt1 showed reduced interaction with Mcm and is deficient in the formation of a high molecular weight complex with Mcm. Thus, a productive interaction between Cdt1 and MCM appears to be essential for efficient loading of MCM onto template DNA, as well as for the efficient unwinding reaction.

The Methanothermobacter thermautotrophicus Cdc6-2 protein, the putative helicase loader, dissociates the minichromosome maintenance helicase

The Cdc6-1 and -2 proteins from the archaeon Methanothermobacter thermautotrophicus were previously shown to bind the minichromosome maintenance (MCM) helicase. It is shown here that Cdc6-2 protein dissociates the MCM complex. This observation supports the hypothesis that the Cdc6-2 protein functions as a helicase loader.

Plasmids derived from Gifsy-1/Gifsy-2, lambdoid prophages contributing to the virulence of Salmonella enterica serovar Typhimurium: implications for the evolution of replication initiation proteins of lambdoid phages and enterobacteria

Gifsy-1 and Gifsy-2 are lambdoid prophages which contribute to the virulence of Salmonella enterica serovar Typhimurium. The nucleotide sequence of the replication region of both prophages is identical, and similar in organization to the replication region of bacteriophage lambda. To investigate the replication of the Gifsy phages and the relationship between Gifsy and host chromosome replication, a plasmid which contained all the genes and regulatory sequences required for autonomous replication in bacterial cells was constructed. This plasmid, pGifsy, was stably maintained in Escherichia coli cells. The helicase loader of the Gifsy phages is very similar to the DnaC protein of the host, a feature characteristic of a large group of prophages common in the sequenced genomes of pathogenic enterobacteria. This DnaC-like protein showed no similarity to the helicase loader of bacteriophage lambda and closely related phages. Interestingly, unlike plasmids derived from bacteriophage lambda (lambda plasmids), pGifsy did not require a gene encoding the putative helicase loader for replication, although deletion of this gene resulted in a decrease in plasmid copy number. Under these conditions, it was shown that the plasmid utilized the helicase loader coded by the host. On the other hand, the viral protein could not substitute for DnaC in bacterial chromosome replication. The results of the current study support the hypothesis that the enterobacterial helicase loader is of viral origin. This hypothesis explains why the gene for DnaC, the protein central to both replication initiation and replication restart in E. coli, is present in the genomes of Escherichia, Shigella, Salmonella and Buchnera, but not in the genomes of related enterobacteria.

Genetic method to analyze essential genes of Escherichia coli

The genetic analysis of essential genes has been generally restricted to the use of conditional mutations, or inactivating chromosomal mutations, which require a complementing plasmid that must either be counterselected or lost to measure a phenotype. These approaches are limited because they do not permit the analysis of mutations suspected to affect a specific function of a protein, nor do they take advantage of the increasing abundance of structural and bioinformatics data for proteins. Using the dnaC gene as an example, we developed a genetic method that should permit the mutational analysis of other essential genes of Escherichia coli and related enterobacteria. The method consists of using a strain carrying a large deletion of the dnaC gene, which is complemented by a wild-type copy expressed from a plasmid that requires isopropyl-beta-d-thiogalactopyranoside for maintenance. Under conditions in which this resident plasmid is lost, the method measures the function of a dnaC mutation encoded by a second plasmid. This methodology should be widely applicable to the genetic analysis of other essential genes.

Multiple oligomeric forms of Escherichia coli DnaB helicase revealed by electrospray ionisation mass spectrometry

The Escherichia coli DnaB protein (DnaB(6)) is the hexameric helicase that unwinds genomic DNA so it can be copied by the DNA replication machinery. Loading of the helicase onto DNA requires interactions of DnaB(6) with six molecules of its loading partner protein, DnaC. Nano-electrospray ionisation mass spectrometry (nanoESI-MS) of mutant proteins was used to examine the roles of the residues Phe102 (F102) and Asp82 (D82) in the N-terminal domain of DnaB in the assembly of the hexamer. When the proteins were prepared in 1 M ammonium acetate containing magnesium and adenosine triphosphate (ATP) at pH 7.6, both hexameric and heptameric forms of wild-type and F102W, F102E and D82N mutant DnaBs were observed in mass spectra. The spectra of the D82N mutant also showed substantial amounts of a decameric species and small amounts of a dodecamer. In contrast, the F102H DnaB mutant was incapable of forming oligomers of order higher than the hexamer. Thus, although Phe102 is not the only determinant of hexamer assembly, this residue has a role in oligomerisation. NanoESI mass spectra were obtained of mixtures of DnaB(6) with DnaC. The DnaB(6)(DnaC)(6) complex (calculated M(r) 481 164) was observed only when the two proteins were present in equimolar amounts. The data are consistent with cooperative assembly of the complex. ESI mass spectra of mixtures containing DnaC and ATP showed that DnaC slowly hydrolysed ATP to ADP as indicated by ions corresponding to DnaC/ATP and DnaC/ADP complexes. These experiments show that E. coli DnaB can form a heptameric complex and that nanoESI-MS can be used to probe assembly of large (>0.5 MDa) macromolecular complexes.

Helicase binding to DnaI exposes a cryptic DNA-binding site during helicase loading in Bacillus subtilis

The Bacillus subtilis DnaI, DnaB and DnaD proteins load the replicative ring helicase DnaC onto DNA during priming of DNA replication. Here we show that DnaI consists of a C-terminal domain (Cd) with ATPase and DNA-binding activities and an N-terminal domain (Nd) that interacts with the replicative ring helicase. A Zn²⁺-binding module mediates the interaction with the helicase and C67, C70 and H84 are involved in the coordination of the Zn²⁺. DnaI binds ATP and exhibits ATPase activity that is not stimulated by ssDNA, because the DNA-binding site on Cd is masked by Nd. The ATPase activity resides on the Cd domain and when detached from the Nd domain, it becomes sensitive to stimulation by ssDNA because its cryptic DNA-binding site is exposed. Therefore, Nd acts as a molecular ‘switch’ regulating access to the ssDNA binding site on Cd, in response to binding of the helicase. DnaI is sufficient to load the replicative helicase from a complex with six DnaI molecules, so there is no requirement for a dual helicase loader system.

A novel dnaC mutation that suppresses priB rep mutant phenotypes in Escherichia coli K-12

The loading of a replisome in prokaryotic and eukaryotic cells at an origin of DNA replication and during replication restart is a highly ordered and regulated process. During replication restart in Escherichia coli, the PriA, PriB, PriC, DnaT and Rep proteins form multiple pathways that bind to repaired replication forks. These complexes are then recognized by DnaC as sites to load DnaB, the replicative helicase. Several dnaC mutations have been isolated that suppress phenotypes of some replication restart mutants. A new dnaC mutation (dnaC824) is reported here that efficiently suppresses priB rep mutant phenotypes. Furthermore, it is shown that dnaC824 will suppress phenotypes of priB priA300, rep priA300 and priB priC strains. Unlike other dnaC suppressors, it can only weakly suppress the absence of priA. Others have reported a different type of dnaC mutation, dnaC1331, is able to mimic priB mutant phenotypes. This is supported herein by showing that like dnaC1331, a priB mutation is synthetically lethal with a dam mutation and this can be rescued by a mutH mutation. Furthermore, priB dam lethality can also be suppressed by dnaC824. Like a priB mutation, a dnaC1331 mutation causes a priA2::kan-like phenotype when combined with priA300. Lastly, we show that dnaC824 is dominant to wild type and that dnaC1331 is recessive to wild type. Several models are discussed for the action of these mutant dnaC proteins in replication restart.

Control of DNA replication: regulation and activation of eukaryotic replicative helicase, MCM

DNA replication is a key event of cell proliferation and the final target of signal transduction induced by growth factor stimulation. It is also strictly regulated during the ongoing cell cycle so that it occurs only once during S phase and that all the genetic materials are faithfully duplicated. DNA replication may be arrested or temporally inhibited due to a varieties of internal and external causes. Cells have developed intricate mechanisms to cope with the arrested replication forks to minimize the adversary effect on the stable maintenance of genetic materials. Helicases play a central role in DNA replication. In eukaryotes, MCM (minichromosome maintenance) protein complex plays essential roles as a replicative helicase. MCM4-6-7 complex possesses intrinsic DNA helicase activity which translocates on single-stranded DNA form 3' to 5'. Mammalian MCM4-6-7 helicase and ATPase activities are specifically stimulated by the presence of thymine-rich single-stranded DNA sequences onto which it is loaded. The activation appears to depend on the thymine content of this single-strand, and sequences derived from human replication origins can serve as potent activators of the MCM helicase. MCM is a prime target of Cdc7 kinase, known to be essential for activation of replication origins. We will discuss how the MCM may be activated at the replication origins by template DNA, phosphorylation, and interaction with other replicative proteins, and will present a model of how activation of MCM helicase by specific sequences may contribute to selection of replication initiation sites in higher eukaryotes.

Functional interplay between the Bacillus subtilis DnaD and DnaB proteins essential for initiation and re-initiation of DNA replication

Initiation and re-initiation of chromosomal DNA replication in bacteria rely on divergent multiprotein assemblies, which direct the functional delivery of the replicative helicase on single-stranded DNA (ssDNA) at specific sites. These two processes are triggered either at the single chromosomal origin oriC or at arrested forks by the conserved DnaA and PriA proteins respectively. In Bacillus subtilis, these two pathways further require the three essential proteins DnaB, DnaD and DnaI, restrictively encoded in Gram positive bacteria of low GC content. We have recently shown that DnaI and DnaB act as a pair of loaders of the DnaC replicative helicase. The role of DnaD appeared more enigmatic. It was previously shown to interact with DnaA and to display weak ssDNA binding activity. Here, we report that purified DnaD can interact physically with PriA and with DnaB. We show that the lethality of the temperature-sensitive dnaD23 mutant can be suppressed by different DnaB point mutants, which were found to be identical to the suppressors of priA null mutants. The DnaD23 protein displays lower ssDNA binding activity than DnaD. Conversely, the DnaB75 protein, the main dnaD23 suppressor, has gained affinity for ssDNA. Finally, we observed that this interplay between DnaD and DnaB is crucial for their concerted interaction with SSB-coated ssDNA, which is the expected substrate for the loading of the replicative helicase in vivo. Altogether, these results highlight the need for both DnaD and DnaB to interact individually and together with ssDNA during the early stages of initiation and re-initiation of chromosomal DNA replication. They also point at a main structural role of DnaD in the multiprotein assemblies built during these two essential processes.

Replication fork and SeqA focus distributions in Escherichia coli suggest a replication hyperstructure dependent on nucleotide metabolism

Replication from the origin of Escherichia coli has traditionally been visualized as two replisomes moving away from each other, each containing a leading and a lagging strand polymerase. Fluorescence microscopy studies of tagged polymerases or forks have, however, indicated that the polymerases may be confined to a single location (or a few locations in cells with overlapping replication cycles). Here, we have analysed the exact replication patterns of cells growing with four different growth and replication rates, and compared these with the distributions of SeqA foci. The SeqA foci represent replication forks because the SeqA protein binds to the newly formed hemimethylated DNA immediately following the forks. The results show that pairs of forks originating from the same origin stay coupled for most of the cell cycle and thus support the replication factory model. They also suggest that the factories consisting of four polymerases are, at the time immediately after initiation, organized into higher order structures consisting of eight or 12 polymerases. The organization into replication factories was lost when replication forks experienced a limitation in the supply of nucleotides or when the thymidylate synthetase gene was mutated. These results support the idea that the nucleotide synthesis apparatus co-localizes with the replisomes forming a 'hyperstructure' and further suggest that the integrity of the replication factories and hyperstructures is dependent on nucleotide metabolism.

The box VII motif of Escherichia coli DnaA protein is required for DnaA oligomerization at the E. coli replication origin

Escherichia coli DnaA protein initiates DNA replication from the chromosomal origin, oriC, and regulates the frequency of this process. Structure-function studies indicate that the replication initiator comprises four domains. Based on the structural similarity of Aquifex aeolicus DnaA to other AAA+ proteins that are oligomeric, it was proposed that Domain III functions in oligomerization at oriC (Erzberger, J. P., Pirruccello, M. M., and Berger, J. M. (2002) EMBO J. 21, 4763-4773). Because the Box VII motif within Domain III is conserved among DnaA homologues and may function in oligomerization, we substituted conserved Box VII amino acids of E. coli DnaA with alanine by site-directed mutagenesis to examine the role of this motif. All mutant proteins are inactive in initiation from oriC in vivo and in vitro, but they support RK2 plasmid DNA replication in vivo. Thus, RK2 requires only a subset of DnaA functions for plasmid DNA replication. Biochemical studies on a mutant DnaA carrying an alanine substitution at arginine 281 (R281A) in Box VII show that it is inactive in in vitro replication of an oriC plasmid, but this defect is not from the failure to bind to ATP, DnaB in the DnaB-DnaC complex, or oriC. Because the mutant DnaA is also active in the strand opening of oriC, whereas DnaB fails to bind to this unwound region, the open structure is insufficient by itself to load DnaB helicase. Our results show that the mutant fails to form a stable oligomeric DnaA-oriC complex, which is required for the loading of DnaB.

Regulation of minichromosome maintenance helicase activity by Cdc6

Genetic studies, together with amino acid and structural similarities to the clamp loaders of DNA polymerase sliding clamps, have suggested that the Cdc6 protein may function as a loader for the eukaryotic replicative helicase, the minichromosome maintenance (MCM) complex. Thus, Cdc6 may act as the functional homologue of the bacterial DnaC that utilizes ATP hydrolysis to assemble the DnaB helicase at the origin. This report shows that the helicase activity of an MCM homologue from the archaeon Methanothermobacter thermautotrophicus is inhibited in the presence of the Cdc6 homologues. This inhibitory activity is dependent, as for DnaC, on ATP binding to Cdc6. Moreover, an intact Cdc6 winged helix domain is required for efficient inhibition. Two-hybrid analyses indicated that MCM and Cdc6 interact and that the interaction is mediated by the winged helix domain. Analysis of Cdc6 and MCM homologues from several archaea exhibited differences in the inhibitory activity suggesting divergence in function in Cdc6 and MCM homologues among the archaea.

Interactions of the Escherichia coli DnaB helicase hexamer with the replication factor the DnaC protein. Effect of nucleotide cofactors and the ssDNA on protein-protein interactions and the topology of the complex

Quantitative studies of interactions between the Escherichia coli replication factor DnaC protein and the DnaB helicase have been performed using sedimentation velocity and fluorescence energy transfer techniques. The applied novel analysis of the sedimentation data allows us to construct thermodynamic rigorous binding isotherms without any assumption as to the relationship between the observed molecular property of the complexes formed, the average sedimentation coefficient, or the degree of binding. Experiments have been performed with the fluorescein-modified DnaB helicase, which allows an exclusive monitoring of the DnaB-DnaC complex formation. The DnaC binding to the unmodified helicase has been characterized in competition experiments. The data establish that, in the presence of the ATP analog AMP-PNP, or ADP, a maximum of six DnaC monomers bind cooperatively to the DnaB hexamer. The positive cooperative interactions are limited to the two neighboring DnaC molecules. Analyses using a statistical thermodynamic hexagon model indicate that, under the solution conditions examined, the affinity is characterized by the intrinsic binding constant K=1.4(+/-0.5)x10(5)M(-1) and cooperativity parameter sigma=21+/-5. These data suggest strongly that the DnaC-DnaB complex exists in vivo as a mixture of complexes with a different number of bound DnaC molecules, although the complex with six DnaC molecules bound dominates the distribution. The DnaC nucleotide-binding site is not involved in the stabilization of the complex. Moreover, the hydrolysis of NTP bound to the helicase or the DnaC is not required for the release of the DnaC protein from the complex. The single-stranded DNA (ssDNA) bound to the helicase does not affect the DnaC protein binding. However, in the presence of the DNA, there is a significant difference in the energetics and structure of the ternary complex, DnaC-DnaB-ssDNA, formed in the presence of AMP-PNP as compared to ADP. The topology of the ternary complex DnaC-DnaB-ssDNA has been determined using the fluorescence energy transfer method. In solution, the DnaC protein-binding site is located on the large 33 kDa domain of the DnaB helicase. The significance of the results in the functioning of the DnaB helicase-DnaC protein complex is discussed.

A two-protein strategy for the functional loading of a cellular replicative DNA helicase

The delivery of a ring-shaped hexameric helicase onto DNA is a fundamental step of DNA replication, conserved in all cellular organisms. We report the biochemical characterization of the bacterial hexameric replicative helicase DnaC of Bacillus subtilis with that of the two replication initiation proteins DnaI and DnaB. We show that DnaI and DnaB interact physically and functionally with the DnaC helicase and mediate its functional delivery onto DNA. Thus, DnaB and DnaI form a pair of helicase loaders, revealing a two-protein strategy for the loading of a replicative helicase. We also present evidence that the DnaC helicase loading mechanism appears to be of the ring-assembly type, proceeding through the recruitment of DnaC monomers and their hexamerization around single-stranded DNA by the coordinated action of DnaI and DnaB.

Escherichia coli DnaA protein loads a single DnaB helicase at a DnaA box hairpin

The molecular engine that drives bidirectional replication fork movement from the Escherichia coli replication origin (oriC) is the replicative helicase, DnaB. At oriC, two and only two helicase molecules are loaded, one for each replication fork. DnaA participates in helicase loading; DnaC is also involved, because it must be in a complex with DnaB for delivery of the helicase. Since DnaA induces a local unwinding of oriC, one model is that the limited availability of single-stranded DNA at oriC restricts the number of DnaB molecules that can bind. In this report, we determined that one DnaB helicase or one DnaB-DnaC complex is bound to a single-stranded DNA in a biologically relevant DNA replication system. These results indicate that the availability of single-stranded DNA is not a limiting factor and support a model in which the site of entry for DnaB is altered so that it cannot be reused. We also show that 2-4 DnaA monomers are bound on the single-stranded DNA at a specific site that carries a DnaA box sequence in a hairpin structure.

Replication arrests during a single round of replication of the Escherichia coli chromosome in the absence of DnaC activity

We used a flow cytometric assay to determine the frequency of replication fork arrests during a round of chromosome replication in Escherichia coli. After synchronized initiation from oriC in a dnaC(Ts) strain, non-permissive conditions were imposed, such that active DnaC was not available during elongation. Under these conditions, about 18% of the cells failed to complete chromosome replication. The sites of replication arrests were random and occurred on either arm of the bidirectionally replicating chromosome, as stalled forks accumulated at the terminus from both directions. The forks at the terminal Ter sites disappeared in the absence of Tus protein, as the active forks could then pass through the terminus to reach the arrest site, and the unfinished rounds of replication would be completed without DnaC. In a dnaC2(Ts)rep double mutant, almost all cells failed to complete chromosome replication in the absence of DnaC activity. As inactivation of Rep helicase (the rep gene product) has been shown to cause frequent replication arrests inducing double-strand breaks (DSBs) in a replicating chromosome, DnaC activity appears to be essential for replication restart from DSBs during elongation.

Stoichiometry of DnaA and DnaB protein in initiation at the Escherichia coli chromosomal origin

Initiation of DNA replication at the Escherichia coli chromosomal origin, oriC, occurs through an ordered series of events that depend first on the binding of DnaA protein, the replication initiator, to DnaA box sequences within oriC followed by unwinding of an AT-rich region near the left border. The prepriming complex then forms, involving the binding of DnaB helicase at oriC so that it is properly positioned at each replication fork. We assembled and isolated the prepriming complexes on an oriC plasmid, then determined the stoichiometries of proteins in these complexes by quantitative immunoblot analysis. DnaA protein alone binds to oriC with a stoichiometry of 4-5 monomers per oriC DNA. In the prepriming complex, the stoichiometries are 10 DnaA monomers and 2 DnaB hexamers per oriC plasmid. That only two DnaB hexamers are bound, one for each replication fork, suggests that the binding of additional molecules of DnaA in forming the prepriming complex restricts the loading of additional DnaB hexamers that can bind at oriC.