Enantiomer separations by nonaqueous capillary electrophoresis using octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin

Single isomer cyclodextrins as chiral selectors in capillary electrophoresis

Since decades, cyclodextrins are one of the most powerful selectors in chiral capillary electrophoresis for the enantioseparation of diverse organic compounds. This review concerns papers published over the last decade (from 2009 until nowadays), dealing with the capillary electrophoretic application of single isomer cyclodextrin derivatives in chiral separations. Following a brief overview of their synthetic approaches, the inventory of the neutral, negatively and positively charged (including both permanently ionic and pH-tunable ionizable substituents) and zwitterionic CD derivatives is presented, with insights to underlying structural aspects by NMR spectroscopy and molecular modeling. CE represents an ideal tool to study the weak, non-covalent supramolecular interactions. The published methods are reviewed in the light of enantioselectivity, enantiomer migration order and the fine-tuning of enantiodiscrimination by the substitution pattern of the single entity selector molecules, which is hardly possible for their randomly substituted counterparts. All the reviewed publications herein support that cyclodextrin-based chiral capillary electrophoresis seems to remain a popular choice in pharmaceutical and biomedical analysis.

Enantioseparations in Nonaqueous Capillary Electrophoresis Using Charged Cyclodextrins

The enantioseparation of acidic and basic compounds can be successfully achieved in nonaqueous capillary electrophoresis (NACE) using single-isomer charged β-cyclodextrin (β-CD) derivatives of opposite charge to that of the analytes. This chapter describes how to separate the enantiomers of three basic substances selected as model compounds, i.e., alprenolol, bupranolol, and terbutaline, using the negatively charged heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-CD (HDAS-β-CD). The enantiomers of three acidic drugs (tiaprofenic acid, suprofen, and flurbiprofen) are resolved using a monosubstituted amino β-CD derivative, namely 6-monodeoxy-6-mono(3-hydroxy)propylamino-β-CD (PA-β-CD).

Enantioseparations in nonaqueous capillary electrophoresis using charged cyclodextrins

The enantioseparation of acidic and basic compounds can be successfully achieved in nonaqueous capillary electrophoresis using single-isomer charged β-cyclodextrin (β-CD) derivatives of opposite charge to that of the analytes. This chapter describes how to separate the enantiomers of three basic substances selected as model compounds, i.e., alprenolol, bupranolol, and terbutaline, using the negatively charged heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-CD. The enantiomers of three acidic drugs (tiaprofenic acid, suprofen, and flurbiprofen) are resolved using a monosubstituted amino β-CD derivative, namely, 6-monodeoxy-6-mono(3-hydroxy)propylamino-β-CD.

Advances in the enantioseparation of β-blocker drugs by capillary electromigration techniques

β-Blocker drugs or β-adrenergic blocking agents are an important class of drugs, prescribed with great frequency. They are used for various diseases, particularly for the treatment of cardiac arrhythmias, cardioprotection after myocardial infarction (heart attack), and hypertension. Almost all β-blocker drugs possess one or more stereogenic centers; however; only some of them are administered as single enantiomers. Since both enantiomers can differ in their pharmacological and toxicological properties, enantioselective analytical methods are required not only for pharmacodynamic and pharmacokinetic studies but also for quality control of pharmaceutical preparations with the determination of enantiomeric purity. In addition to the chromatographic tools, in recent years, capillary electromigration techniques (CE, CEC, and MEKC) have been widely used for enantioselective purposes employing a variety of chiral selectors, e.g. CDs, polysaccharides, macrocyclic antibiotics, proteins, chiral ion-paring agents, etc. The high separation efficiency, rapid analysi,s and low consumption of reagents of electromigration methods make them a very attractive alternative to the conventional chromatographic methods. In this review, the development and applications of electrodriven methods for the enantioseparation of β-blocker drugs are reported. The papers concerning this topic, published from January 2000 until December 2010, are summarised here. Particular attention is given to the coupling of chiral CE and CEC methods to MS, as this detector provides high sensitivity and selectivity.

Generic systems for the enantioseparation of basic drugs in NACE using single-isomer anionic CDs

The enantioseparation of 10 basic drugs was evaluated in NACE systems using heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)-β-CD (HMAS-β-CD). For this purpose, a D-optimal design with 21 experimental points was applied. Four antifungal agents (econazole, isoconazole, miconazole, sulconazole), three local anesthetics (bupivacaine, mepivacaine and prilocaine), two sympathomimetics (salbutamol and terbutaline) and one β-blocker (carvedilol) were selected as basic model analytes. The influence on the enantiomeric resolution of anionic CD and BGE anion concentrations as well as the BGE anion nature was investigated. For all studied analytes, the enantiomeric resolution was shown to be significantly influenced by the CD concentration. Based on the observed results, a generic NACE system was recommended, namely 20mM HMAS-β-CD and 10mM ammonium camphor SO(3)(-) in methanol acidified with 0.75 M formic acid. Moreover, this NACE system was compared to previous conditions with heptakis(2,3-di-O-methyl-6-O-sulfo)-β-CD (HDMS-β-CD) or heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-CD (HDAS-β-CD). Finally, two generic systems using either HDAS-β-CD or HMAS-β-CD were proposed and evaluated for the enantioseparation of ketamine and norketamine after incubation of ketamine in phenobarbital-induced male rat liver microsomes systems.

Association of two single-isomer anionic CD in NACE for the chiral and achiral separation of fenbendazole, its sulphoxide and sulphone metabolites: application to their determination after in vitro metabolism

A NACE method was developed for the separation of fenbendazole (FBZ), a prochiral drug giving rise to chiral (oxfendazole or OFZ) and nonchiral (FBZ sulphone or FBZSO(2)) metabolites. First, the effect of the nature and the concentration of CD as well as that of the acidic BGE on the enantiomeric separation of OFZ were studied. OFZ enantiomers were completely resolved using a BGE made up of 10 mM ammonium formate and 0.5 M TFA in methanol containing 10 mM heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD and 10 mM heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD. Moreover, the NACE method was found to be particularly well suited to the simultaneous determination of FBZ, OFZ enantiomers, and FBZSO(2). Thiabendazole was selected as an internal standard. The CD-NACE potential was then evaluated for in vitro metabolism studies using FBZ as a model case. The OFZ enantiomers and FBZSO(2) could be detected after incubation of FBZ in the phenobarbital-induced male rat liver microsomes systems.

The role of cyclodextrins in chiral capillary electrophoresis

The members of the enantiomeric pairs frequently show rather different biological effects, so their chiral selective synthesis, pharmacological studies and analysis are necessary. CE has unique advantages in chiral analysis. The most frequently used chiral selectors are CDs in this field. This paper gives a short view on the advantages on CE in direct chiral separations, emphasizing the role of CDs. The reason for the broad selectivity spectra of CDs is discussed in detail. The physical background of chiral selective separations is briefly shown in CE. Their interaction mechanisms are shortly defined. The general trend of their use is statistically evaluated. Most frequently used CDs and CD derivatives are characterized. Advantages of ionizable CDs and single-isomer derivatives are shown. The general trend of their use is established.

Nonaqueous capillary electrophoresis in pharmaceutical analysis

This review presents different solvents and electrolytes commonly used as BGEs in NACE for the analysis of pharmaceutical compounds. Most NACE applications carried out since 1998 for the analysis of compounds of pharmaceutical interest are presented in four tables: (i) analysis of drugs and related substances, (ii) analysis of chiral substances, (iii) analysis of phytochemical extracts and (iv) analysis of drugs in biological fluids. These selected examples are used to illustrate the interest in NACE versus conventional aqueous CE.

Enantiomeric separation of acidic compounds using single-isomer amino cyclodextrin derivatives in nonaqueous capillary electrophoresis

The enantiomeric separation of a series of acidic pharmaceuticals (mostly nonsteroidal anti-inflammatory drugs) has been investigated in NACE systems using single-isomer amino beta-CD derivatives. The first part of this study consisted of the selection of the basic experimental conditions to separate efficiently the enantiomers of acidic drugs. Several parameters, such as the nature of the ionic BGE components, were studied and a methanolic solution of ammonium acetate containing the cationic CD was selected as BGE. A D-optimal design with 20 experimental points was then applied and the nature and concentration of the CD were found to have a significant effect on the enantiomeric resolution for all studied compounds. Resolution (R(s)) values were always higher with 6-monodeoxy-6-mono(3-hydroxy)propylamino-beta-CD (PA-beta-CD) compared to those obtained with 6-monodeoxy-6-mono(2-hydroxy)propylamino-beta-CD (IPA-beta-CD). However, the latter led to shorter migration times. Generic NACE conditions were then selected by means of the multivariate approach in order to obtain the highest R(s) values in a minimum amount of time. Finally, dependence of separation selectivity, resolution, as well as mobility difference on chiral selector concentration was discussed and binding constants with PA-beta-CD were estimated for the two enantiomers of one of the model compounds, suprofen in these NACE systems.

Nonaqueous capillary electrophoresis method for the enantiomeric purity determination of S-timolol using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin: validation using the accuracy profile strategy and estimation of uncertainty

Nonaqueous capillary electrophoresis (NACE) was successfully applied to the enantiomeric purity determination of S-timolol maleate using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD) as chiral selector. With a background electrolyte made up of a methanolic solution of 0.75 M formic acid, 30 mM potassium camphorsulfonate and containing 30 mM HDMS-beta-CD, the determination of 0.1% of R-timolol in S-timolol could be performed with an enantiomeric resolution of 8.5. Pyridoxine was selected as internal standard. The NACE method was then fully validated by applying a novel strategy using accuracy profiles. It is based on beta-expectation tolerance intervals for the total measurement error which includes trueness and intermediate precision. The uncertainty of measurements derived from beta-expectation tolerance intervals was estimated at each concentration level of the validation standards. To confirm the suitability of the developed and validated method, several real samples of S-timolol maleate containing R-timolol maleate at different concentrations were analysed and the results were compared to those obtained by liquid chromatography.

Enhanced method performances for conventional and chiral CE-ESI/MS analyses in plasma

Due to its high efficiency, selectivity, and sensitivity, CE-ESI/MS has evolved as an efficient technique for the drugs and metabolites analysis in biological matrices. However, a sample preparation is mandatory prior to CE-ESI/MS analysis. To achieve fast and simplified sample preparation of plasma samples, protein precipitation (PP) and liquid-liquid extraction (LLE) were used with two injection techniques: hydrodynamic (HD) and electrokinetic (EK) injection. CE-ESI/MS analyses of pharmaceutical compounds and amphetamine derivatives were developed. Detection limits of 1 ppm were reached with PP and HD injection whereas 1 ppb was detected when samples were prepared with LLE and injected by EK. Same experiments were performed for stereoselective determinations in partial-filling mode and detection limits achieved were equivalent to conventional analysis (0.5 ppb per enantiomer). When complex matrices are analyzed, MS signal suppression or enhancement effects are generally not reproducible and could compromise results with ESI. Therefore, matrix effect was investigated in CE-ESI/MS with a commercially available coaxial sheath-liquid ESI interface used as postcapillary infusion system to determine MS signal alterations. Matrix effects were differentially evidenced according to the selected sample preparation. With PP, signal suppression was observed out of the analyses migration window, while for LLE no relevant matrix effect occurred in all experiments.

Influence of the nature of the electrolyte on the chiral separation of basic compounds in nonaqueous capillary electrophoresis using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin

The influence on the enantiomeric resolution of the nature of the cationic BGE component (sodium, ammonium or potassium) and that of the anionic component (chloride, formate, methanesulfonate or camphorsulfonate) as well as the concentration of heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD), the selected chiral selector, was studied in nonaqueous capillary electrophoresis (NACE). For this purpose, two D-optimal designs with 33 and 26 experimental points were applied. Three beta-blockers (atenolol, celiprolol and propranolol) and three local anesthetics (bupivacaine, mepivacaine and prilocaine) were selected as basic model compounds. Both cationic and anionic BGE components were found to have a deep impact on the enantiomeric resolution of the investigated analytes but it is the cationic component that has shown the strongest influence. Indeed, in some cases, the change of the latter led to a complete loss of enantioresolution. Based on the observed results, two NACE systems were recommended, namely ammonium formate and potassium camphorsulfonate in a methanolic solution containing HDMS-beta-CD and acidified with formic acid, in order to separate efficiently the enantiomers of basic drugs.

Rapid stereoselective separations of amphetamine derivatives with highly sulfated γ-cyclodextrin

The highly sulfated gamma-CD (HS-gamma-CD) is a chiral selector widely used in CE for the enantioseparation of pharmaceutical compounds. This paper investigated different approaches to reduce the stereoselective analysis time of amphetamine (AT) derivatives according to the chiral selector concentration in the BGE. With high HS-gamma-CD concentration, tested analytes were separated in 3.5 min as anionic complexes with short-end injection technique in reversed polarity mode. However, this procedure presented some limitations in terms of efficiency and resolution, excessive Joule heating and poor compatibility with MS detection. With low HS-gamma-CD concentration, compounds were separated as cations. Conventional approaches to reduce CE analysis time demonstrated critical resolution between some analytes. Therefore, the use of the partial-filling technique compatible with MS detection was carried out. Under optimized conditions, the analysis time for the chiral separation of seven AT like compounds was reduced to 6 min. Moreover, sensitivity of CE-MS was sufficient for the determination of ATs in plasma following a simple liquid-liquid extraction.

Synthesis of a single-isomer sulfated β-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions and its use for the electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes, Part 2: Heptakis(2-O-methyl-6-O-sulfo) cyclomaltoheptaose

The sodium salt of heptakis(2-O-methyl-6-O-sulfo)cyclomaltoheptaose (HMS), the second single-isomer, sulfated beta-CD carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 23 weak base analytes in acidic aqueous and methanolic BGEs. HMS interacted strongly with only about half of the analytes studied. The good separation selectivities and favorable normalized EOF mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 23 weak base analytes in the aqueous BGEs, often with separation selectivity values complimentary to those obtained with other single-isomer sulfated CDs. HMS did not prove to be as good a resolving agent in acidic methanolic BGEs as its counterpart, heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose.

Separation and determination of phospholipids in plant seeds by nonaqueous capillary electrophoresis

A method has been developed for the separation and determination of phospholipids by nonaqueous capillary electrophoresis in a separation medium of acetonitrile-2-proponol (3:2, v/v), 0.3% acetic acid and 60 mM ammonium acetate. To optimize the separation conditions, the composition of separation medium including alcohols, acetic acid, n-hexane and ammonium acetate was studied. The solvation interaction and ion-dipole interaction were also investigated. The contents of phospholipids in soybean, sunflower, peanut, apricot kernel, filbert and walnut were determined by the recommended method. The results obtained by the nonaqueous capillary electrophoreses were in good agreement with those determined by micellar electrokinetic chromatography.

Synthesis of heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)-cyclomaltoheptaose, a single-isomer, sulfated β-cyclodextrin carrying nonidentical substitutents at all the C2, C3, and C6 positions and its use for the capillary electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes

The sodium salt of heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose (HMAS), the first single-isomer, sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 24 weak base pharmaceuticals in acidic aqueous and acidic methanolic background electrolytes. HMAS interacted more strongly with most of the analytes studied than heptakis(2,3-di-O-methyl-6-O-sulfo)cyclomaltoheptaose, but less strongly than heptakis(2,3-di-O-acetyl-6-O-sulfo)cyclomaltoheptaose, the respective analogs with identical substituents at the C2 and C3 positions. The good separation selectivities and favorable normalized electroosmotic flow mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 24 weak base analytes in the aqueous and methanolic background electrolytes. The trends in the effective mobilities and separation selectivities as a function of the HMAS concentration closely followed the predictions of the ionic strength-corrected charged resolving agent migration model.

Chiral separations by capillary electromigration techniques in nonaqueous media

Enantiomer separations by CE employing nonaqueous conditions are reviewed. The general focus of this article is directed towards solvent effects on chiral recognition and the separation mechanism. After a general discussion of solvent effects on the individual processes involved in CE enantiomer separation, specifics for various selector classes are discussed together with a few applications of enantioselective nonaqueous CE.

Chiral separation of labetalol stereoisomers in human plasma by capillary electrophoresis

A newly derivatized cyclodextrin [octakis-(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin] was investigated as a chiral selector in capillary zone electrophoresis in a study of the chiral separation of labetalol stereoisomers. Heptakis(2,3-diacetyl-6-sulfato)-beta-cyclodextrin (HDAS-beta-CD) and octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma-CD) were shown to be effective in separating labetalol stereoisomers. Optimal separating conditions of the four stereoisomers of labetalol were achieved with 10 mM HDAS-beta-CD and 10 mM ODAS-gamma-CD in an acidic pH buffer of low molarity. Data illustrating the effects of capillary length and cyclodextrin concentration on the separation are presented. The longer capillary length and high voltage enabled the baseline separation of all isomers in less than 15 min. The optimized method was applied to the analysis of human control plasma containing labetalol utilizing solid-phase extraction (SPE) in the 96-well format.

Octakis-6-sulfato-gamma-cyclodextrin as additive for capillary electrokinetic chromatography of dibenzoazepines: carbamazepine, oxcarbamazepine and their metabolites

Single isomer octakis-(2,3-dihydroxy-)6-sulfato-gamma-cyclodextrin used as pseudostationary phase of the background electrolyte interacts with dibenzo[b,f]azepines (consisting of a condensed 3-ring system) and forms negatively charged complexes. Hydroxygroups in position 2 and 3 at carbamazepine increase the extent of interaction, whereas substitution by oxygen at position 10 and/or 11 reduces it. The complex constants for the analytes are ranging from few tens L/mol (10-hydroxycarbamazepine, 10,11-dihydroxycarbamazepine, 10,11-epoxycarbamazepine, oxcarbazepine) to several hundreds L/mol (carbamazepine, 2-hydroxycarbamazepine, 3-hydroxycarbamazepine), and are much larger than those of the analytes with octakis-(2,3-dimethyl-)-6-sulfato-gamma-cyclodextrin. Full enantiomeric separation of the chiral metabolites of carbamazepine and oxcarbazepine is obtained at octakis-(2,3-dihydroxy-)-6-sulfato-gamma-cyclodextrin concentrations of about 10 mM (3 mM borate buffer, pH 8.5). Compared to heptakis-6-sulfato-beta-cyclodextrin, selectivity differs and stereoselectivity is more pronounced.

Recent developments in chiral capillary electrophoresis and applications of this technique to pharmaceutical and biomedical analysis

This paper provides an overview of the current status of chiral capillary electrophoresis (CE). The emphasis is placed on the application of CE in chiral separation of various racemic compounds. During the last two years about 280 papers, several review articles, and two entire issues, edited by S. Fanali (Electrophoresis 1999, 20, 2577-2798, and H. Nishi and S. Terabe (J. Chromatogr. A 2000, 879, 1-471.) have been devoted to chiral CE. Enantiomeric separations of various compounds, e.g., pharmaceuticals, drug candidates, drugs and related metabolites in biological fluids, amino acids, di- and tri peptides, pesticides and fungicides, have been performed using different chiral selectors. Native and derivatized cyclodextrins continue to be the most widely used chiral selectors. Other chiral selectors such as natural and synthetic chiral micelles, crown ethers, chiral ligands, proteins, oligo- and polysaccharides, and macrocyclic antibiotics have also been applied to chiral CE separations.

Fundamental aspects of chiral separations by capillary electrophoresis

A review is presented that surveys the basic theory of direct separation of enantiomers by capillary electrophoretic (CE) techniques. These separations are based on the formation of diastereomeric complexes between the enantiomeric analytes and a chiral selector added to the electrolyte solution. The review covers a comprehensive treatment of the equations needed for optimization of selectivity coefficients, resolution and analysis time in the zone electrophoretic mode. In this context, it takes into account combined equilibria of complexation and protonation/deprotonation as well as complexation and paritition into micelles. On the basis of these equations, the benefits of charged selectors and the optimization potential inherent to pH tuning can be documented. In addition, the review deals with some basic aspects of chiral isoelectric focusing and briefly discusses indirect enantioseparation. In a subsequent section a survey is given on particularfeatures of the various types of chiral selectors. Finally, the recent developments in preparative enantioseparation in continuous free-flow system and by use of isoelectric membranes are discussed.

Development of stereoselective nonaqueous capillary electrophoresis system for the resolution of cationic and amphoteric analytes

A stereoselective ion-pair nonaqueous capillary electrophoresis (NACE) method employing the partial filling technique with N-derivatized amino acids, e.g., (R)- and (S)-3,5-dinitrobenzoyl-leucine (DNB-Leu), as chiral selector for the separation of "pseudoenantiomeric" cinchona alkaloid derivatives and other structurally related basic compounds like the enantiomers of mefloquine is presented. Originating from NACE with cinchona alkaloid derivatives as chiral counterions, this method was developed by application of the reciprocity principle of chiral recognition, which was proven to be valid for stereoselective ion-pair capillary electrophoresis (CE). A variety of basic and amphoteric selectands (SAs) could be well resolved. Thereby, the separation was primarily based on stereoselective ion-pair formation of corresponding SA stereoisomers and mobility differences of free and complexed (ion-paired) SAs. Additionally, in the case of diastereomeric SAs, naturally existing mobility differences between the diastereomers played also a role, but was shown by control experiments with racemic DNB-Leu and without selector (SO) to be of minor contribution to overall separation selectivity. Due to its simplicity, speed, and good reproducibility, the established method can be utilized for fast screening of cationic as well as amphoteric chiral compounds, and therefore is a valuable tool in the development of new chiral selectors and chiral stationary phases. Small sample amounts of the SO (4-5 mg) and only analytical amounts of SAs are needed, and about 20-50 compounds per day can be tested.