Separation of acidic solutes by nonaqueous capillary electrophoresis in acetonitrile-based media. Combined effects of deprotonation and heteroconjugation

Charge-Based Separation of Acid-Functional Polymers by Non-aqueous Capillary Electrophoresis Employing Deprotonation and Heteroconjugation Approaches

Water-borne polymers are in ever-increasing demand due to their favorable ecological profile compared to traditional solvent-borne polymer systems. Many water-borne polymer particles are stabilized in aqueous media by the incorporation of acid-functional monomers. Due to the large variety of comonomers applied, these water-borne polymers have various superimposed statistical distributions, which make it challenging to obtain in-depth information regarding incorporation of the acidic monomers. For selective analysis of the incorporated acidic monomers, a charge-based non-aqueous capillary electrophoresis (NACE) separation was developed. Two approaches were developed: (i) deprotonation of the acid functionality with an organically soluble strong base and (ii) heteroconjugation of anions of carboxylic acids with incorporated acid functionality. In both approaches, N-methylpyrrolidone, as a strong solvent for polymers with a favorable relative permittivity for the presence of dissociated ionic species, was used for the separation. It was shown that anions of carboxylic acids specifically associate with the incorporated acid groups in the polymers, resulting in negatively charged complexes that could be separated based on charge-to-size ratio by NACE. Although both approaches give comparable results with respect to acid distribution for acid-functional polymers, the effective mobility of the deprotonated polymers is roughly double that obtained from the heteroconjugation approach. Unlike the heteroconjugation approach, deprotonation conditions were detrimental to the fused-silica capillary, limiting practical use. Polymers with different chemical compositions, molecular weights, and acid contents were subjected to the CE approaches developed. Polymers with varying molecular weight but similar relative acid monomer content were shown to have similar migration times, which confirms that this approach separates polymers based on charge-to-size ratio.

Electromigration of a heteroconjugated imidazole–acetate complex in ACN

ACN is an extremely poor hydrogen bond donor and therefore the anions dissolved in it are solvated mainly by other hydrogen bond donors (e.g. uncharged acids) possibly present in the solution. Under properly selected experimental conditions stabilization via hydrogen bonding can be used for separation in CE as has been demonstrated for uncharged acids by several authors. Electromigration based on heteroconjugation can be of importance, e.g. when aqueous separation medium cannot be used due to stability reasons. It also allows CE to be used as a tool for solution chemistry measurements, if the required physicochemical properties of the studied system are known or they can be predicted with sufficient accuracy by existing theories. In the present work we showed that also an uncharged base can stabilize an anion via hydrogen bonding in ACN. In the setup imidazole was chosen as a model base and acetate ion as complexing anion in equimolar acetic acid-acetate buffer. The resulted hydrogen-bonded imidazole-acetate complex (i.e. heteroconjugate) possesses a charge and can thus migrate in CE. It was shown that the studied complexation in ACN is sensitive to competition by other hydrogen bond donors such as water and methanol. On the other hand, acetone, which is a poor hydrogen bond donor, did not have much effect on the complexation. To take the effect of ionic strength on mobility into account, mobilities of the imidazole-acetate complex measured at various ionic strengths were corrected to zero ionic strength by the aid of conductivity equation. A fit of the 1:1 binding isotherm to the ionic strength corrected mobility versus acetate concentration data led to rather good correlation. However, x-reciprocal linear transformation of the binding isotherm showed nonlinearity, which could be partly explained by homoconjugation of acetic acid and acetate ion. Since the homoconjugation constant for acetic acid under present experimental conditions was not available, theoretical simulations were used to demonstrate the effects of homoconjugation. The possibility of multiple complexation of imidazole was discussed as well.

Capillary Zone Electrophoresis of Some Extremely Weak Bases in Acetonitrile

In water capillary zone electrophoresis cannot be used to investigate basic compounds, which are so weak that their pK(a,HB+) values are less than zero. In acetonitrile the basic strength of such compounds is increased by many orders of magnitude. Accordingly, several extremely weak bases are protonated at low pH in acetonitrile, thus, allowing their investigation by CZE. In this work the CZE separation of thioacetamide, acetamide, thiourea, benzamide, and 4-nitrobenzamide as well as that of N-methylformamide, N,N-dimethylformamide, formamide, and dimethyl sulfoxide is demonstrated in acetonitrile using 10 mmol/L perchloric acid as an electrolyte. The effect of BGE additives, like water and acetic acid, on the CZE performance is discussed. The problem of finding a suitable electroosmotic flow marker at low pH in acetonitrile is addressed, and nitromethane is shown to be a proper marker compound under such extreme conditions. This work demonstrates how organic solvents can enlarge the field of application of CZE.

Improving sensitivity in simultaneous determination of copper carboxylates by nonaqueous capillary electrophoresis

A new method of nonaqueous capillary electrophoresis (NACE) with UV spectrophotometric detection was developed and optimized for the simultaneous determination of seven carboxylates (trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), nitrilotriacetic acid (NTA), 1,3-diaminopropane-N,N,N',N'-tetraacetic acid (PDTA) and triethylenetetraaminehexaacetic acid (TTHA)) as copper complexes. The method development was carried out by using a fused silica capillary. Background electrolyte (BGE) was optimized and the best separation achieved by using 30mmolL(-1) potassium bromide in N-methylformamide (NMF) at apparent pH (pH(app)) 10.2. A voltage of +30kV and direct UV detection at 280nm were used in all measurements. Large-volume sample stacking using the electroosmotic flow pump (LVSEP) was tested in addition to basic capillary electrophoresis (CE) and observed to improve the separation of the analyte zones in the capillary. All the peaks in the electropherograms were properly separated, the calibration plots gave excellent correlation coefficients (R(2)>or=0.994) and all seven copper carboxylate complexes were detected in less than 20min using both the basic measurements and the large-volume sample stacking method. The new NACE method was tested with lake water and proved to be reliable.

Are the asserted advantages of organic solvents in capillary electrophoresis real? A critical discussion

Background electrolytes (BGEs) prepared in pure organic solvents are common alternatives to aqueous BGEs in capillary electrophoresis. Several general advantages of organic solvents over water have been asserted in the literature, namely (i) organic solvents increase the separation selectivity; (ii) organic solvents increase the separation efficiency; (iii) high separation voltages and/or high BGE ionic strengths can be used in organic solvents due to lower electric current compared to water. Related assumptions are that (iv) due to higher field strengths applicable in organic solvents the analysis time is shorter than in aqueous BGEs, and (v) the solubility and/or stability of components (either analytes or BGE chemicals) is higher/better in organic solvents. In the present work, these asserted advantages were critically evaluated based on the physical principles of ion transport and zone dispersion in solution. The result was that many of the above-mentioned general advantages are overestimated or even inexistent; often they have no fundamental basis.

Comparison of the use of aqueous and nonaqueous buffers in association with cyclodextrin for the chiral separation of 3,4-methylenedioxymethamphetamine and related compounds

A comparison of the use of aqueous and nonaqueous buffers in association with beta-CD for the chiral separation of (R)- and (S)-3,4-methylenedioxymethamphetamine and related compounds is described. The (R)- and (S)-isomers of 3,4-methylenedioxymethamphetamine (MDMA) and its major metabolite 3,4-methylenedioxyamphetamine (MDA) were prepared. Under aqueous and nonaqueous buffer conditions and based on the CZE and MEKC modes, the order of migration of (R)-MDA, (S)-MDA, (R)-MDMA, and the (S)-MDMA enantioisomers were determined. Several electrophoretic parameters, including the concentration of beta-CD (aqueous, 25-60 mM; nonaqueous, 20-150 mM) used in the electrophoretic separation and the amount of organic solvents required for the separation, were optimized.

Capillary electrophoresis inN,N-dimethylformamide

N,N-Dimethylformamide (DMF) is a dipolar protophilic solvent with physicochemical properties that makes it suitable as solvent for capillary electrophoresis (CE). It is prerequisite for the proper application of CE to adjust and to change the pH of the background electrolyte (BGE) in a defined manner. This was done in the present work using benzoic acid-benzoate by selecting different concentration ratios of acid and salt, and calculating the theoretical pH from the activity-corrected Henderson-Hasselbalch equation. The mobilities of the analytes (chloro- and nitro-substituted phenolates) were found to follow reasonably well the typical sigmoid mobility versus pH curve as predicted by theory. The actual mobilities and pK(a) values (at 25 degrees C) of the analytes were derived from these curves. pK(a) values were in the range of 11.1-11.7, being thus 3-4.4 units higher than in water. This pK(a) shift is caused by the destabilization of the analyte anion and the better stability (solubility) of the molecular analyte acid in DMF, which overcome the higher basicity of DMF compared to water. Absolute mobilities were calculated from the actual mobilities; they were between 32x10(-9) and 42x10(-9) m(2)/Vxs. Slight deviations of the measured mobilities from the theoretical mobility versus pH curve were discussed on the bases of ion pairing and heteroconjugation and homoconjugation of either buffer components or buffer components and analytes. Heteroconjugation was used as a mechanism for the electrically driven separation of neutral analyte molecules in a BGE where salicylate acted as complex forming ion. Rough estimation of the complexation constants for the phenolic analytes gave values in the range of 100-200 L/mol. Addition of water to the solvent decreased the effect of heteroconjugation, but it was still present up to the surprisingly high concentration of 20% water. Electrophoretically relevant parameters like ionic mobilities and pK(a) values, and conjugation and ion pairing are dependent on the water content of the solvent. The water uptake of DMF was measured when exposed to humidity of ambient air. The resulted behavior of the water uptake was found rather similar to that for acetonitrile and methanol.

Separation and determination of phospholipids in plant seeds by nonaqueous capillary electrophoresis

A method has been developed for the separation and determination of phospholipids by nonaqueous capillary electrophoresis in a separation medium of acetonitrile-2-proponol (3:2, v/v), 0.3% acetic acid and 60 mM ammonium acetate. To optimize the separation conditions, the composition of separation medium including alcohols, acetic acid, n-hexane and ammonium acetate was studied. The solvation interaction and ion-dipole interaction were also investigated. The contents of phospholipids in soybean, sunflower, peanut, apricot kernel, filbert and walnut were determined by the recommended method. The results obtained by the nonaqueous capillary electrophoreses were in good agreement with those determined by micellar electrokinetic chromatography.

Influence of solvent properties on separation and detection performance in non-aqueous capillary electrophoresis–mass spectrometry of basic analytes

The versatility of non-aqueous capillary electrophoresis (NACE) results mainly from the variety of physico-chemical properties of the different solvents. They provide solubility for a wide range of analytes, enable to control electrophoretic selectivity, but affect in some cases UV absorbance detection. The coupling of NACE to electrospray mass spectrometry (ESI-MS) allows to cope with the high UV cut-off of some CE relevant solvents (e.g., formamides). In this paper the pure organic solvents methanol, acetonitrile, dimethylsulfoxide, formamide, N-methylformamide and N,N-dimethylformamide are evaluated against water for the preparation of ammonium acetate electrolytes to separate the basic model substances 2-aminobenzimidazole, procaine, propranolol and quinine with NACE-MS. MS coupling is assisted with the sheath liquid water-isopropanol (1:4, v/v) with 0.1% formic acid. The goal of the paper is to assess the influence of the solvent on selectivity, separation speed, and peak efficiency for a given set of model compounds on a simple empirical basis. It should give the user an idea how the separation quality is changed when nothing but the running solvent is altered. The obtained efficiency results were discussed with respect to physico-chemical models described in literature (assuming longitudinal diffusion as the only source of band broadening), but no satisfying correlations with solvent properties could be traced. The feasibility of all six organic solvents for MS coupling was demonstrated and the influence of the separation solvent on the MS detection performance was compared. In the seven different solvents, the shortest run time was obtained with acetonitrile, the best peak resolution with the amphiprotic solvents (especially methanol) best peak efficiency with methanol and formamide, and the most sensitive ESI-MS detection with acetonitrile and methanol, but with only slight advantage to water.

Separation and determination of active components inSchisandra chinensis Baill. and its medicinal preparations by non-aqueous capillary electrophoresis

A simple, economical and effective non-aqueous capillary electrophoresis separation and detection method was developed for the quantification of deoxyschizandrin and gamma-schizandrin in Schisandra chinensis Baill. and its medicinal preparations for the first time. After optimization of separation conditions, a buffer of 140 mmol/L sodium cholate in methanol was selected for separating the two analytes, but baseline separation of SA and SB in real samples was not obtained. Therefore second-order derivative electropherograms were applied for resolving overlapping peaks. Regression equations revealed good linear relationships (correlation coefficients 0.9975--0.9988) between peak heights in second-order derivative electropherograms and concentrations of the two analytes. The relative standard deviations (RSD) of the migration times and the peak height of the two constituents were in the ranges 0.62--0.79% and 0.25--2.17% (intra-day) and 1.43--2.06 and 4.08--5.72% (inter-day), respectively. The recoveries of the two constituents ranged from 93.2 to 103.0%. The results indicated that baseline separation of the analytes was sometimes hard to obtain in real samples and second-order derivative electropherograms were applicable for the resolution and analysis of overlapping peaks.

Capillary zone electrophoresis in non-aqueous solutions: pH of the background electrolyte

Although the establishment of a pH scale and the determination of the pH in water is not problematic, it is not a straightforward task in non-aqueous solvents. As capillary zone electrophoresis (CZE) in organic solvents has gained increasing interest, it seems to be valuable to re-discuss the concept of the pH in such media, especially pointing to those aspects, which make pH measurement uncertain in non-aqueous solvents. In this review, the relevant aspects when dealing with primary standard (PS) and secondary standard (SS) as recommended by the International Union of Pure and Applied Chemistry (IUPAC), and the usage of the operational pH are discussed with special emphasis to non-aqueous solvents. Here, different liquid junction potentials, incomplete dissociation of the electrolytes (especially in solvents with low or moderate relative permittivity) and the occurrence of homo- and heteroconjugation must be taken into account. Problems arising in capillary zone electrophoresis practice are addressed, e.g. when the background electrolyte (BGE) consists of organic solvents, but the measuring electrode (normally the glass electrode) is calibrated with aqueous buffers, and the liquid junction potentials between the solvents do not cancel each other. The alternative concept of establishing a certain pH is described, using mixtures of reference acids or bases with known pKa in the organic solvent, and their respective salts, at a certain concentration ratio, relying to the Henderson-Hasselbalch equation. Special discussion is directed to those organic solvents most common in capillary zone electrophoresis, methanol (MeOH) and acetonitrile (ACN), but other solvents are included as well. The potential significance of small amounts of water present in the organic solvent on changes in pKa values, and thus on the pH of the buffering components is pointed out.

Capillary electrophoresis of inorganic anions in hydro-organic media

The capillary electrophoresis separation of four inorganic anions (NO3-, I-, Br- and SCN-) was investigated over the whole range of methanol-water mixture composition. As the separation selectivity was strongly dependent on the solvent composition, the influence of ion-pairing and solvation phenomena was examined in depth in an attempt to explain this modification. First, a series of experiments was performed in methanolic background electrolytes, with counter-ions of different size. Ion-pair formation involving electrolyte ions was assessed to allow for a correction for free electrolyte ion concentration. Ion-pair formation constants between each inorganic anion and electrolyte counter-ion were next determined from the variations of the anion mobility as a function of the free counter-ion concentration. In view of the low values obtained, ion-pair formation alone failed to explain the selectivity variations. Solvation phenomena were then investigated with the help of a theoretical quantum model, the density functional theory (DFT), coupled with a polarizable continuum model to mime non-specific solvent effects. Whereas this model proved successful at predicting the mobility order at infinite dilution in water, it failed to predict the correct order in methanol.

Comparison of gas chromatography–mass spectrometry and capillary electrophoresis in analysis of phenolic compounds extracted from solid matrices with pressurized hot water

Self-constructed pressurized hot water extraction (PHWE) equipment was used in dynamic mode to extract spiked phenolic compounds (phenol, 3-methylphenol, 4-chloro-3-methylphenol and 3,4-dichlorophenol) from sea sand and soil. Phenols were analyzed by both gas chromatography-mass spectrometry (GC-MS) and capillary zone electrophoresis (CZE) to compare the techniques and to find out if CZE is a suitable tool for analysis of phenols extracted from environmental matrix. Good recoveries of phenols spiked in sea sand were achieved at all PHWE temperatures (50, 100, 200, 300 C). GC-MS studies showed that phenols were selectively extracted from soil at 50 C but various other compounds (e.g. polyaromatic hydrocarbons) were extracted along with the phenols at 300 degrees C. In the case of CZE, phenols extracted from the soil, at 300 C were separated with good resolution at pH 9.7, and co-extracted compounds did not interfere with the analysis. The analytical values obtained by GC-MS and CZE were generally of similar magnitude.

Electrophoretic behavior of alprenolol in mixed solvent electrolyte systems

The electrophoretic mobilities of alprenolol have been determined in a mixed solvent background electrolyte system containing sodium acetate (40 mM)+acetic acid (40 mM) as buffering agent and different volume fractions of water, methanol and ethanol using capillary electrophoresis. The mobility of alprenolol has been used to test the prediction capability of a model trained by previously reported mobility data of five beta-blocker drugs at the same electrophoretic conditions. The average percentage mean deviations (APMD) between experimental and predicted values were used as an accuracy criterion. The APMD (+/-SD) obtained for alprenolol data in binary/ternary solvent electrolyte system employing the mobility values in mono-solvent buffers was 4.37 (+/-3.50)% and the corresponding value for an ab initio prediction method was 7.65 (+/-4.30)%.

Capillary electrophoresis of methyl-substituted phenols in acetonitrile

The separation of mono- and dimethylphenols by capillary electrophoresis in pure acetonitrile was investigated. In acetonitrile, uncharged phenols interact with background electrolyte anions forming negatively charged complexes, which can be separated from each other by capillary electrophoresis. The background electrolyte anions tested were acetate, bromide and chloride. The calculated formation constants for phenol-anion complexes were highest with acetate and smallest with bromide. Complex formation was found to be sensitive to traces of water in the background electrolyte. The separation of methylphenols was also carried out in acetonitrile at high pH using background electrolytes prepared from diprotic acids and tetrabutylammonium hydroxide. At high pH the phenols were partly dissociated, providing an additional mechanism for the separation. All methylphenols were separated with the use of malonate background electrolyte. However, this approach was prone to interference from methanol resulting from the tetrabutylammonium hydroxide solution.

Evaluation of chromatographic versus electrophoretic behaviour of a series of therapeutical peptide hormones

In this work, models describing the effect of pH on chromatographic and electrophoretic behaviour for a series of polyprotic therapeutic peptide hormones were compared. taking into account the species in solution and the activity coefficients. The usefulness of the proposed equations is twofold, they permit the determination of the acidity constants in water and in the hydroorganic mobile phases used in liquid chromatography (LC) and capillary electrophoresis (CE) and can also be used for the selection of the optimum pH for the separation of mixtures of the modelled compounds. The proposed relationships allow an important reduction of the experimental data needed for the development of new separation methods. The accuracy of the proposed equations is verified by modelling the chromatographic and electrophoretic behaviour of a series of polyprotic therapeutic peptide hormones. By calculating the values of predicted resolutions, selection of the optimum pH to perform LC or CE separations of their mixtures becomes a rapid and simple process.

Application of 1-alkyl-3-methylimidazolium-based ionic liquids in non-aqueous capillary electrophoresis

In many cases salts, which are liquid at room temperature show a better solubility in organic solvents, and can be used in nonaqueous capillary zone electrophoresis as ionic additives. In this study 1-alkyl-3-methylimidasolium-based ionic liquids were used as additives in separation media to assess the interactions between the analytes and the ionic additive present and to find an influence of the type and concentration of the ionic additive, also the nature of the nonaqueous medium employed. Different organic solvents (acetonitrile and methanol) contribute differently to the conversion of analytes into a charged form. Complexes with either an anionic or a cationic part of the ionic liquid additive were formed. This was the case for electrophoresis separation of Brønsted acids and polyphenolic compounds.

Ultra-low-temperature non-aqueous capillary electrophoretic separation--77 K fluorescence spectroscopic detection for the on-line identification of photo-converted analytes of trans-resveratrol

We demonstrate here, for the first time, that non-aqueous capillary electrophoresis (NACE) can be interfaced with any ultra-low-temperature (ULT) separation method and 77 K fluorescence spectroscopy (FS). This novel ULT-NACE-FS system consists of a modular CE system, a dry ice bath, and instrumentation for 77 K fluorescence detection. The ULT-NACE method serves to separate structurally similar molecules by a combination of a low electrophoresis current and a high voltage at approximately -70 degrees C. When the ULT-NACE-separated analytes move into the quartz Dewar flask and traverse into the capillary detection window, liquid nitrogen was added, thus freezing the separating analyte zones, allowing the collection of 77 K fluorescence spectra for on-line spectral fingerprint identification. The first application of the ULT-NACE-FS system is described for the analysis of photo-converted analytes of trans-resveratrol; prospects and future applications of ULT-NACE-FS are also briefly addressed.

Determination of cannabinoids in hair using high-pH* non-aqueous electrolytes and electrochemical detection. Some aspects of sensitivity and selectivity

Non-aqueous capillary electrophoresis with electrochemical detection (NACE-ED) was applied to the determination of cannabinoids in hair. The effect of different electrolyte compositions on the selectivity of the separation of tetrahydrocannabinol (THC), cannabinol (CBN), cannabidiol (CBD) and tetrahydrocannabinol carboxylic acid (THCA) was studied. Complete electrophoretic resolution was obtained using a strongly basic background electrolyte consisting of 5 mM sodium hydroxide dissolved in acetonitrile-methanol (1:1). Electrochemical detection yielded well defined signals in the oxidation mode. In order to obtain low limits of detection experimental parameters, which determine the sensitivity and the noise level, were optimized. A crucial parameter for sensitive measurements using a wall-tube flow cell as end-column detector is the distance between the capillary outlet and the working electrode. The highest signal-to-noise ratio using a 50 microm I.D. capillary was obtained at a distance of 25 microm. When the capillary outlet was moved away from the working electrode, thus reducing the strength of the separation field present at the working electrode, a large low frequency noise developed. This rise was attributed to disturbances of the hydrodynamic pattern in the flow cell. Analytical aspects such as sensitivity, reproducibility and selectivity were addressed in this work. The precision of NACE-ED regarding migration time and peak height for a sample containing 1 microg/ml THC was 0.4% and 1.1% (RSD), respectively (n=5). The calibration curve was linear for concentrations ranging between 0.1 and 10 microg/ml (r=0.998). The limit of detection for THC was 37 ng/ml, which is almost two orders of magnitude lower when compared with on-column UV detection. The method was evaluated using hair samples containing cannabinoids as sample material.

Migration behavior of therapeutic peptide hormones: prediction of optimal separation by capillary electrophoresis

A general equation that relates electrophoretic mobility of polyprotic peptide substances and pH of the running electrolytes is established, taking into account the species in solution and the activity coefficients. Modelling electrophoretic mobility as a function of pH can be simultaneously used for determination of ionization constants and selection of the optimum pH for separation of mixtures of the modelled compounds. The proposed relationships allow an important reduction of the experimental data needed for development of new separation methods. The accuracy of the proposed equations is verified by modelling the migration behavior of a heterogeneous series of polyprotic amphoteric peptide hormones. By calculating the values of predicted resolutions, selection of the optimum pH to perform separation of their mixtures becomes a rapid and simple process.

Recent advances in capillary electrophoresis and capillary electrochromatography of pollutants

An overview of major developments in capillary electrophoresis and capillary electrochromatography systems in the environmental field is presented, covering relevant publications between the second half of 1999 and early 2001. Contributions are reviewed in relation to developments in detection, sample preparation/preconcentration, precision and applications. Many interesting examples are shown and the influence of important parameters on the performance of developed methods is discussed.

Electrophoretic behavior of peptides in capillary electrophoresis influence of ionic strength and pH in aqueous-organic media

Through correct pH, pKa and activity coefficients values, a model describing the effect of pH on electrophoretic mobility of substances has been applied to a series of peptides in water and in acetonitrile-water mixtures. The derived equations permit prediction of the optimum pH for the electrophoretic separation from only a few experimental values and they also permit determination of pKa values of analytes in the aqueous-organic media employed. Furthermore, the electrophoretic resolution between pairs of substances can be predicted, in order to evaluate electrophoretic separations of the studied peptides.