Metal chelate affinity chromatography. I. Influence of various parameters on the retention of nucleotides and related compounds

Drug Development Targeting the Ubiquitin-Proteasome System (UPS) for the Treatment of Human Cancers

Cancer cells are characterized by a higher rate of protein turnover and greater demand for protein homeostasis compared to normal cells. In this scenario, the ubiquitin-proteasome system (UPS), which is responsible for the degradation of over 80% of cellular proteins within mammalian cells, becomes vital to cancer cells, making the UPS a critical target for the discovery of novel cancer therapeutics. This review systematically categorizes all current reported small molecule inhibitors of the various essential components of the UPS, including ubiquitin-activating enzymes (E1s), ubiquitin-conjugating enzymes (E2s), ubiquitin ligases (E3s), the 20S proteasome catalytic core particle (20S CP) and the 19S proteasome regulatory particles (19S RP), as well as their mechanism/s of action and limitations. We also discuss the immunoproteasome which is considered as a prospective therapeutic target of the next generation of proteasome inhibitors in cancer therapies.

One-step affinity purification of fusion proteins with optimal monodispersity and biological activity: application to aggregation-prone HPV E6 proteins

BACKGROUND

Bacterial expression and purification of recombinant proteins under homogeneous active form is often challenging. Fusion to highly soluble carrier proteins such as Maltose Binding Protein (MBP) often improves their folding and solubility, but self-association may still occur. For instance, HPV E6 oncoproteins, when produced as MBP-E6 fusions, are expressed as mixtures of biologically inactive oligomers and active monomers. While a protocol was previously developed to isolate MBP-E6 monomers for structural studies, it allows the purification of only one MBP-E6 construct at the time. Here, we explored a parallelizable strategy more adapted for biophysical assays aiming at comparing different E6 proteins.

RESULTS

In this study, we took advantage of the distinct size and diffusion properties of MBP-E6 monomers and oligomers to separate these two species using a rapid batch preparation protocol on affinity resins. We optimized resin reticulation, contact time and elution method in order to maximize the proportion of monomeric MBP-E6 in the final sample. Analytical size-exclusion chromatography was used to quantify the different protein species after purification. Thus, we developed a rapid, single-step protocol for the parallel purification of highly monomeric MBP-E6 samples. MBP-fused HPV16 E6 samples obtained by this approach were validated by testing the binding to their prototypical peptide targets (the LXXLL motif from ubiquitine ligase E6AP) by BIAcore-SPR assay.

CONCLUSIONS

We have designed a rapid single-step batch affinity purification approach to isolate biologically active monomers of MBP-fused E6 proteins. This protocol should be generalizable to isolate the monomer (or the minimal biologically active oligomer) of other proteins prone to self-association.

Smart Nanoparticles for Selective Immobilization of Acid Phosphatases

An easy to use method combining the selectivity of metal chelate affinity binding with strong covalent linking was developed for immobilization of non-specific acid phosphatases bearing a His-tag from crude cell lysate. Silica nanoparticles were grafted with aminopropyl functions which were partially transformed further with EDTA dianhydride to chelators. The heterofunctionalized nanoparticles charged with Ni2+ as the most appropriate metal ion were applied as support. First, the His-tagged phosphatases were selectively bound to the metal-chelate functions of the support. Then, the enzyme-charged silica nanoparticles were further stabilized by forming a covalent linkage between nucleophilic moieties at the enzyme surface and free amino groups of the support using neopentylglycol diglycidylether as the most effective bifunctional linking agent. The phosphatase biocatalysts obtained by this method exhibited better phosphate transfer activity with a range of alcohols and PPi as phosphate donor in aqueous medium applying batch and continuous-flow modes than the ones immobilized on conventional supports. Furthermore, this novel strategy opens up novel possibility for efficient immobilization of other His-tagged recombinant enzymes.

Application of immobilized metal affinity chromatography in proteomics

It has been proved that the progress of proteomics is mostly determined by the development of advanced and sensitive protein separation technologies. Immobilized metal affinity chromatography (IMAC) is a powerful protein fractionation method used to enrich metal-associated proteins and peptides. In proteomics, IMAC has been widely employed as a prefractionation method to increase the resolution in protein separation. The combination of IMAC with other protein analytical technologies has been successfully utilized to characterize metalloproteome and post-translational modifications. In the near future, newly developed IMAC integrated with other proteomic methods will greatly contribute to the revolution of expression, cell-mapping and structural proteomics.

Immobilized metal ion affinity chromatography: a review on its applications

After 35 years of development, immobilized metal ion affinity chromatography (IMAC) has evolved into a popular protein purification technique. This review starts with a discussion of its mechanism and advantages. It continues with its applications which include the purification of histidine-tagged proteins, natural metal-binding proteins, and antibodies. IMAC used in conjunction with mass spectroscopy for phosphoprotein fractionation and proteomics is also covered. Finally, this review addresses the developments, limitations, and considerations of IMAC in the biopharmaceutical industry.

Removal of PCR error products and unincorporated primers by metal-chelate affinity chromatography

Immobilized Metal Affinity Chromatography (IMAC) has been used for decades to purify proteins on the basis of amino acid content, especially surface-exposed histidines and “histidine tags” genetically added to recombinant proteins. We and others have extended the use of IMAC to purification of nucleic acids via interactions with the nucleotide bases, especially purines, of single-stranded RNA and DNA. We also have demonstrated the purification of plasmid DNA from contaminating genomic DNA by IMAC capture of selectively-denatured genomic DNA. Here we describe an efficient method of purifying PCR products by specifically removing error products, excess primers, and unincorporated dNTPs from PCR product mixtures using flow-through metal-chelate affinity adsorption. By flowing a PCR product mixture through a Cu²⁺-iminodiacetic acid (IDA) agarose spin column, 94–99% of the dNTPs and nearly all the primers can be removed. Many of the error products commonly formed by Taq polymerase also are removed. Sequencing of the IMAC-processed PCR product gave base-calling accuracy comparable to that obtained with a commercial PCR product purification method. The results show that IMAC matrices (specifically Cu²⁺-IDA agarose) can be used for the purification of PCR products. Due to the generality of the base-specific mechanism of adsorption, IMAC matrices may also be used in the purification of oligonucleotides, cDNA, mRNA and micro RNAs.

Control of protein immobilization: coupling immobilization and site-directed mutagenesis to improve biocatalyst or biosensor performance

Mutagenesis and immobilization are usually considered to be unrelated techniques with potential applications to improve protein properties. However, there are several reports showing that the use of site-directed mutagenesis to improve enzyme properties directly, but also how enzymes are immobilized on a support, can be a powerful tool to improve the properties of immobilized biomolecules for use as biosensors or biocatalysts. Standard immobilizations are not fully random processes, but the protein orientation may be difficult to alter. Initially, most efforts using this idea were addressed towards controlling the orientation of the enzyme on the immobilization support, in many cases to facilitate electron transfer from the support to the enzyme in redox biosensors. Usually, Cys residues are used to directly immobilize the protein on a support that contains disulfide groups or that is made from gold. There are also some examples using His in the target areas of the protein and using supports modified with immobilized metal chelates and other tags (e.g., using immobilized antibodies). Furthermore, site-directed mutagenesis to control immobilization is useful for improving the activity, the stability and even the selectivity of the immobilized protein, for example, via site-directed rigidification of selected areas of the protein. Initially, only Cys and disulfide supports were employed, but other supports with higher potential to give multipoint covalent attachment are being employed (e.g., glyoxyl or epoxy-disulfide supports). The advances in support design and the deeper knowledge of the mechanisms of enzyme-support interactions have permitted exploration of the possibilities of the coupled use of site-directed mutagenesis and immobilization in a new way. This paper intends to review some of the advances and possibilities that these coupled strategies permit.

Water-elutability of nucleic acids from metal-chelate affinity adsorbents: enhancement by control of surface charge density

Immobilized metal affinity chromatography (IMAC) is widely used for purification of proteins, especially "hexahistidine-tagged" recombinant proteins. We previously demonstrated the application of IMAC to selective capture of nucleic acids, including RNA, selectively-denatured genomic DNA, and PCR primers through interactions with purine bases exposed in single-stranded regions. We also found that the binding affinity of nucleic acids for IMAC adsorbents can be increased several-fold by addition of 20 volume% of neutral additives such as ethanol or DMSO. In the present work, it is demonstrated that bound nucleic acids can be effectively eluted with water instead of the usual imidazole-containing competitive eluants, when the surface density of negative charges is enhanced by operation at alkaline pH, or by deliberate metal-underloading of the anionic chelating ligands. With enhanced negative surface charge density, nucleic acid adsorption can be made strongly dependent on the presence of adsorption-promoting additives and/or repulsion-shielding salts, and removal of these induces elution. Complete water-elutability is demonstrated for baker's yeast RNA bound to 10% Cu(II)- underloaded IDA Chelating Sepharose in a binding buffer of 20 mM HEPES, 240 mM NaCl, pH 7. Water elutability will significantly enhance the utility of IMAC in nucleic acid separations.

Neutral additives enhance the metal-chelate affinity adsorption of nucleic acids: Role of water activity

Immobilized metal-chelate affinity chromatography has been widely used in the purification of proteins, and we have recently found that it can also be applied to purification of nucleic acids through interactions involving exposed bases, especially purines. Here we report that the inclusion of moderate quantities of neutral solutes in the buffer substantially enhances the binding affinity of nucleic acids for immobilized metal-chelate affinity adsorbents. Addition of 20% (v/v) of solutes such as ethanol, methanol, isopropanol, n-propanol, and dimethyl sulfoxide enhances the initial affinity of binding of total yeast RNA by 4.4-, 3.8-, 3.7-, 3.0-, and 2.8-fold, respectively for Cu(II)-iminodiacetic acid (IDA) agarose adsorbent, and the weaker adsorption by Cu(II)-nitrilotriacetic acid (NTA) agarose was even more strongly enhanced. The adsorption affinities of the smaller oligodeoxynucleotide molecules A20, G20, C20 and T20 also increase with the addition of ethanol, suggesting that the effect is not significantly mediated by conformational changes. Binding enhancement generally correlates with reduction of water activity by the various solutes, as predicted by several models of solution thermodynamics, consistent with an entropic contribution by displacement of waters from the metal-chelate. Interestingly, the enhancement was not seen with the proteins bovine serum albumin and lysozyme.

Expression, purification, and immobilization of His-tagged D-amino acid oxidase of Trigonopsis variabilis in Pichia pastoris

High-level expression of D: -amino acid oxidase (DAO) has been reported in Pichia pastoris by integrating the DAO gene under the control of the alcohol oxidase promoter (PAOX1). However, the time taken to reach peak product concentration is usually long (approximately 43 h), and cultivation requires tight regulation of methanol feeding. In this paper, we describe the expression of His-tagged DAO (HDAO) in P. pastoris using the glyceraldehydes-3-phosphate dehydrogenase promoter (PGAP). The maximal level of HDAO expression using the PGAP integrant is attained in 13 h and is equal to that obtained using the PAOX1 integrant in 43 h. We also explored the possibility of secreting HDAO in P. pastoris. In-frame fusion of Saccharomyces cerevisiae alpha-factor secretion signal under a PGAP or PAOX1 resulted in low-level secretion of active HDAO, which was not of practical use. The intracellularly expressed HDAO under PGAP was purified by agar-based affinity support and then immobilized on Amberzyme oxirane resin. The immobilized HDAO, with specific activity of 75 U g-1 (wet weight), could be recycled more than 14 times without significant loss of activity. The data suggest that intracellular production of HDAO under PGAP, followed by affinity purification and immobilization on oxirane resin, may serve as an effective process for the manufacture of immobilized DAO for industrial application.

Expression and purification of penicillin G acylase enzymes from four different micro-organisms, and a comparative evaluation of their synthesis/hydrolysis ratios for cephalexin

Several genes for the enzyme penicillin G acylase, as isolated from four different micro-organisms (Alcaligenes facaelis, Escherichia coli, Kluyvera cryocrescens or Providencia rettgeri) were modified at their carboxy-termini to include His-tag fusions, then were expressed from the plasmid pET-24a(+) in E. coli JM109(DE3) cells. All fusion proteins were next purified to homogeneity in a single step by agar-based Co-IDA chromatography, and were then evaluated as catalysts for the synthesis of cephalexin by a kinetically controlled strategy. We find here that the penicillin G acylase enzyme from K. cryocrescens shows a higher intrinsic synthesis/hydrolysis ratio, when compared to three other enzymes from A. facaelis or P. rettgeri, or E. coli.

Investigation of the use of immobilised metal affinity chromatography for the on-line sample clean up and pre-concentration of nucleotides prior to their determination by ion pair liquid chromatography-electrospray mass spectrometry: a pilot study

This study explored an alternative way to enrich and pre-purify biological samples containing nucleoside mono-, di- and triphosphates. These compounds were trapped by immobilised metal affinity chromatography (IMAC) on a Poros 20 MC IMAC-column, which was conditioned with Fe3+. The IMAC-column was implemented in a column switching set-up separating nucleoside mono-, di- and triphosphates on a Hypersil ODS 35 mm x 0.3 mm capillary column hyphenated to electrospray mass spectrometry resulting in the first miniaturised column switching liquid chromatography-mass spectrometry (LC-MS) system for nucleotides.

Selective and mild adsorption of large proteins on lowly activated immobilized metal ion affinity chromatography matrices

A strategy to selectively adsorb large proteins on immobilized metal ion affinity chromatography supports is presented. It is based on the fact that large proteins have a large surface that permits the long distance interaction with groups placed quite far apart (very dispersed onto the support surface) in the support, therefore, even using lowly activated supports, these proteins may be able to yield multiple interactions with the support, which is not possible for smaller proteins. This has been shown using a crude extract from Escherichia coli, where only large proteins were adsorbed on supports having 0.25 micromol of metallic groups/g of support. Then, these lowly activated supports have been used for purifying multimeric enzymes from thermophilic organisms (alpha- and beta-galactosidases from Thermus sp. strain T2) cloned and over-expressed in mesophilic ones. A previous heating step of the crude extract destroyed the quaternary structure of all multimeric enzymes from the host (E. coli). Thus, the only large protein remaining in the supernatant of this heated extract are the cloned multimeric thermophilic enzymes, permitting their very simple purification by using only one chromatographic step.

Overproduction of Thermus sp. Strain T2 beta-galactosidase in Escherichia coli and preparation by using tailor-made metal chelate supports

A novel thermostable chimeric beta-galactosidase was constructed by fusing a poly-His tag to the N-terminal region of the beta-galactosidase from Thermus sp. strain T2 to facilitate its overexpression in Escherichia coli and its purification by immobilized metal-ion affinity chromatography (IMAC). The poly-His tag fusion did not affect the activation, kinetic parameters, and stability of the beta-galactosidase. Copper-iminodiacetic acid (Cu-IDA) supports enabled the most rapid adsorption of the His-tagged enzyme, favoring multisubunit interactions, but caused deleterious effects on the enzyme stability. To improve the enzyme purification a selective one-point adsorption was achieved by designing tailor-made low-activated Co-IDA or Ni-IDA supports. The new enzyme was not only useful for industrial purposes but also has become an excellent model to study the purification of large multimeric proteins via selective adsorption on tailor-made IMAC supports.

One-step purification, covalent immobilization, and additional stabilization of a thermophilic poly-His-tagged beta-galactosidase from Thermus sp. strain T2 by using novel heterofunctional chelate-epoxy Sepabeads

Using the poly-His-tagged-beta-galactosidase from Thermus sp. strain T2 overexpressed in Escherichia coli (MC1116) as a model enzyme, we have developed a strategy to purify and immobilize proteins in a single step, combining the excellent properties of epoxy groups for enzyme immobilization with the good performance of immobilized metal-chelate affinity chromatography for protein purification. The aforementioned enzyme could not be immobilized onto standard epoxy supports with good yields, and after purification and storage, it exhibited a strong trend to yield very large aggregates as shown by ultracentrifugation experiments. That preparation could not be immobilized in any support, very likely because the pores of the solid became clogged by the large aggregates. These novel epoxy-metal chelate heterofunctional supports contain a low concentration of Co(2+) chelated in IDA groups and a high density of epoxy groups. This enabled the selective adsorption of poly-His-tagged enzymes, and as this adsorption step is necessary for the covalent immobilization procedure, the selective covalent immobilization of the target enzyme could take place. This strategy allowed similar maximum loadings of the target enzyme using either pure or crude preparations of the enzyme. The enzyme derivative presented a very high activity at 70 degrees C (over 1000 IU in the hydrolysis of lactose) and very high stability and stabilization when compared to its soluble counterpart (activity remained unaltered after several days of incubation at 50 degrees C). In fact, this preparation was much more stable than when the same enzyme was immobilized onto standard epoxy Sepabeads.

One-step purification, covalent immobilization, and additional stabilization of poly-His-tagged proteins using novel heterofunctional chelate-epoxy supports

Epoxy supports covalently immobilize proteins following a two-step mechanism; that is, the protein is physically adsorbed and then the covalent reaction takes place. This mechanism has been exploited to combine the selectivity of metal chelate affinity chromatography with the covalent immobilization capacity of epoxy supports. In this way, it has been possible to accomplish, in a simple manner, the purification, immobilization, and stabilization of a poly-His-tagged protein. To fulfill this objective we developed a new kind of multifunctional epoxy support (chelate epoxy support [CES]), which was tested using a poly-His-tagged glutaryl acylase as a model protein (an alphabeta-heterodimeric enzyme of significant industrial interest). The selectivity of the immobilization in CES toward poly-His-tagged proteins was dependent to a large extent on the density and nature of the chelated metal. The highest selectivity was achieved by using low-density chelate groups (e.g., 5 micromol/g) and metals with a low affinity (e.g., Co). However, the rate of covalent immobilization of the protein by its reaction with the epoxy groups on the support significantly increased at alkaline pH values. The multipoint attachment to the CES also depended on the reaction time. The immobilization of both glutaryl acylase subunits was achieved by incubation of the enzyme derivative at pH 10 for 24 h, with the best enzyme derivative 100-fold more stable than the soluble enzyme. By taking advantage of the selectivity properties of the novel support, we were able to immobilize up to 30 mg of protein per gram of modified Eupergit 250 using either pure enzyme or a very crude enzyme extract.

Affinity chromatography of polyhistidine tagged enzymes. New dextran-coated immobilized metal ion affinity chromatography matrices for prevention of undesired multipoint adsorptions

New immobilized metal ion affinity chromatography (IMAC) matrices containing a high concentration of metal-chelate moieties and completely coated with inert flexible and hydrophilic dextrans are here proposed to improve the purification of polyhistidine (poly-His) tagged proteins. The purification of an interesting recombinant multimeric enzyme (a thermoresistant beta-galactosidase from Thermus sp. strain T2) has been used to check the performance of these new chromatographic media. IMAC supports with a high concentration (and surface density) of metal chelate groups promote a rapid adsorption of poly-His tagged proteins during IMAC. However, these supports also favor the promotion of undesirable multi-punctual adsorptions and problems may arise for the simple and effective purification of poly-His tagged proteins: (a) more than 30% of the natural proteins contained in crude extracts from E. coli become adsorbed, in addition to our target recombinant protein, on these IMAC supports via multipoint weak adsorptions; (b) the multimeric poly-His tagged enzyme may become adsorbed via several poly-His tags belonging to different subunits. In this way, desorption of the pure enzyme from the support may become quite difficult (e.g., it is not fully desorbed from the support even using 200 mM of imidazole). The coating of these IMAC supports with dextrans greatly reduces these undesired multi-point adsorptions: (i) less than 2% of natural proteins contained in crude extracts are now adsorbed on these novel supports; and (ii) the target multimeric enzyme may be fully desorbed from the support using 60 mM imidazole. In spite of this dramatic reduction of multi-point interactions, this dextran coating hardly affects the rate of the one-point adsorption of poly-His tagged proteins (80% of the rate of adsorption compared to uncoated supports). Therefore, this dextran coating of chromatographic matrices seems to allow the formation of strong one-point adsorptions that involve small areas of the protein and support surface. However, the dextran coating seems to have dramatic effects for the prevention of weak or strong multipoint interactions that should involve a high geometrical congruence between the enzyme and the support surface.

Characterization of metal affinity of green fluorescent protein and its purification through salt promoted, immobilized metal affinity chromatography

Immobilized metal affinity chromatography (IMAC) was investigated as a method of recovery for green fluorescent protein (GFPuv). It was found that in the absence of genetic modification to enhance metal affinity, GFPuv displayed strong metal affinity to Cu(II) and Ni(II), and weak or negligible affinity to Zn(II) and Co(II). Changes in the mobile phase NaCl concentration during Ni(II)-IMAC strongly affected purity and yield of GFPuv, with fine resolution under higher NaCl concentrations. Finally, IMAC via Cu(II) and Zn(II) with intervening diafiltration was used to recover GFPuv with high yield and purity.

Selective adsorption of poly-His tagged glutaryl acylase on tailor-made metal chelate supports

A poly-His tag was fused in the glutaryl acylase (GA) from Acinetobacter sp. strain YS114 cloned in E. coli yielding a fully active enzyme. Biochemical analyses showed that the tag did not alter the maturation of the chimeric GA (poly-His GA) that undergoes a complex post-translational processing from an inactive monomeric precursor to the active heterodimeric enzyme. This enzyme has been used as a model to develop a novel and very simple procedure for one-step purification of poly-His proteins via immobilized metal-ion affinity chromatography on tailor-made supports. It was intended to improve the selectivity of adsorption of the target protein on tailor-made chelate supports instead of performing a selective desorption. The rate and extent of the adsorption of proteins from a crude extract from E. coli and of pure poly-His tagged GA on different metal chelate supports was studied. Up to 90% of proteins from E. coli were adsorbed on commercial chelate supports having a high density of ligands attached to the support through long spacer arms, while this adsorption becomes almost negligible when using low ligand densities, short spacer arms and Zn2+ or Co2+ as cations. On the contrary, poly-His GA adsorbs strongly enough on all supports. A strong affinity interaction between the poly-His tail and a single chelate moiety seems to be the responsible for the adsorption of poly-His GA. By contrast, multipoint weak interactions involving a number of chelate moieties seem to be mainly responsible for adsorption of natural proteins. By using tailor-made affinity supports, a very simple procedure for one-step purification of GA with minimal adsorption of host proteins could be performed. Up to 20 mg of GA were adsorbed on each ml of chelate support while most of accompanying proteins were hardly adsorbed on such supports. Following few washing steps, the target enzyme was finally recovered (80% yield) by elution with 50 mM imidazole with a very high increment of specific activity (up to a 120 purification factor).

Copper(II)-iminodiacetic acid chelating resin as a stationary phase in the immobilized metal ion affinity chromatography of some aromatic amines

Styrene-divinylbenzene copolymer 60-80 mesh was used as the matrix and ground to a reasonable particle size in a colloid mill. Small and uniform particles (5-15 microns) can be obtained in a laboratory-made continuous acetone elutriation device. After elutriation the iminodiacetic acid (IDA) chelating resin was synthesized, and the infrared spectrum of the product indicated that the synthetic reaction is effective. The Cu(II)-modified IDA chelating resin was used as a stationary phase in high-performance immobilized metal ion affinity chromatography, packed into a column by the high-pressure slurry-packing technique. Methanol, to which ammonia was added as a competitive ligand, was used as the mobile phase for the separation of aromatic amines. The retention value of aromatic amines depends mainly on their basicity and molecular size. The results showed that some aromatic amines can be separated with the Cu(II)-IDA column.

Application of chromatographic methods to the analysis of macrophage factors induced by Nocardia opaca cell walls

Cell walls from Nocardia opaca induce the production of mitogenic factors by mouse peritoneal macrophages in vitro. These factors stimulate thymocytes from C3H/HeJ mice. Supernatants of peritoneal cell culture exhibiting this activity were fractionated by chromatographic procedures such as gel filtration and metal chelate affinity chromatography and the biological activities assayed. These fractionation studies indicate that several biologically active products occur in the supernatant. Four factors monokines (M) with different apparent molecular masses M1 (100,000), M2 (50,000), M3 (16,000) and M4 (7000) were obtained, one of which (M3) was identical to interleukin 1 (IL1). Several of the biochemical parameters of one of these factors, M2, were analyzed. It was found that this monokine had many properties in common with IL1: stimulation of proliferation of thymocytes from C3H/HeJ mice, similar amino acid composition and mobility during isoelectric focusing.