Sweeping: concentration mechanism and applications to high-sensitivity analysis in capillary electrophoresis

Two-step pressure injection-assisted online enrichment of herbicides from foods with affinity micelle sweeping by micellar electrokinetic chromatography

A novel online two-step pressure injection-assisted stacking preconcentration method, which involves sweeping and affinity micelles in micellar electrokinetic chromatography was developed to simultaneously measure various organic anions. The micellar solution was a mixed solution that contained 0.3 mM didodecyldimethylammonium bromide and 20 mM borax. After the micellar solution was injected for 60 s, the tested analytes prepared in 20 mM borax were introduced into the capillary for 150 s. The key experimental factors that influenced the separation and sensitivity were investigated and optimized, including the concentration and injection time of the micellar solution, the concentration of borax in the sample solution, the concentration of sodium dodecyl sulfate and borax in the background electrolyte (BGE), the content of acetonitrile in the BGE and the injection time of the sample solution. Compared with typical injection methods, this method achieved sensitivity enhancement factors ranging from 85 to 97 under optimized conditions. Good linearity for matrix-matched calibration was established for all analytes with R2 values of 0.9986-0.9996. The intraday (n = 6) and interday (n = 6) precisions of the method were less than 2.85% when expressed as relative standard deviations. When the method was applied to analyze rice and dried ginger samples, analyte recoveries ranged from 85.81% to 106.59%. Through sweeping and affinity micelles, stacking preconcentration method was successfully employed to analyze trace amounts of fenoprop and 2,4-dichlorophenoxyacetic acid in rice and dried ginger samples.

A pH-mediated field amplification sample stacking technique based on portable microchip electrophoresis heavy metal ion detection system

We built a portable microchip electrophoresis heavy metal ion detection system and proposed a pH-mediated field amplified sample stacking (pH-mediated FASS) online preconcentration method. The pH-mediated FASS focuses and stacks heavy metal cations by controlling electrophoretic mobilities with a pH change between the analyte and the background electrolyte (BGE) in solution to improve the detection sensitivity of the system. We optimized and adjusted sample matrix solution (SMS) ratios and pH to create concentration and pH gradients for SMS and BGE. Furthermore, we optimize the microchannel width to improve the preconcentration effect further. The system and method analyzed soil leachates polluted with heavy metals and separated Pb2+ and Cd2+ within 90 s, obtaining their levels at 58.01 mg/L and 4.91 mg/L with sensitivity enhancement factors (SEF) of 26.40 and 43.73. Compared with inductively coupled plasma atomic emission spectrometry (ICP-AES), the detection error of the system was less than 8.80%.

Sensitivity enhancement in capillary electrophoresis and their applications for analyses of pharmaceutical and related biochemical substances

This review aims to illustrate sensitivity enhancement methods in capillary electrophoresis (CE) and their applications for pharmaceutical and related biochemical substance analyses. The first two parts of the article describe the introduction and principle of CE. The main part focuses on strategies for sensitivity improvement in CE including detector and capillary technologies and pre-concentration techniques. Applications of these techniques for pharmaceutical and biomedical substance analyses are surveyed during the years 2018-2021. This article is protected by copyright. All rights reserved.

Comparison of clonidine and cyproheptadine determination in animal-derived foods by sweeping-micellar electrokinetic chromatography and large volume sample stacking-capillary zone electrophoresis

This study establishes a method for rapid detection of clonidine and cyproheptadine in foods of animal origin. In order to obtain the best detection method, capillary zone electrophoresis (CZE), large volume sample stacking (LVSS), and sweeping-micellar electrokinetic capillary chromatography (sweeping-MEKC) were used respectively. The limits of detection (LODs) of clonidine and cyproheptadine by LVSS-CZE were 0.028 μg mL−1 and 0.034 μg mL−1, and those by sweeping-MEKC were 0.023 μg mL−1 and 0.031 μg mL−1, respectively. Compared with the CZE method, the two online pre-concentration technologies have greatly improved the detection sensitivity and achieved good enrichment results. However, compared with the sweeping-MEKC system, the LVSS system consumed a longer time and was greatly affected by the actual sample matrix. The sweeping-MEKC method was proved to be suitable for real sample analysis. Under the best sweeping-MEKC conditions, clonidine and cyproheptadine could be well separated within 8 min and good linear relationships in the range of 0.1–1.0 μg mL−1 (r 2 > 0.99) were obtained. This method was successfully applied to the determination of clonidine and cyproheptadine in animal-derived foods with the recoveries of 82.3%–90.1% and the relative standard deviations (RSDs) less than 3.11%. The sweeping-MEKC method is simple to operate and has great potential in the rapid detection of clonidine and cyproheptadine in animal-derived foods.

Determination of four naphthalenediols in cosmetic samples by sweeping-micellar electrokinetic chromatography and a comparison with HPLC

A sweeping micellar electrokinetic chromatography (sweeping-MEKC) method was developed for the determination of 1,7-naphthalenediol, 2,3-naphthalenediol, 1,5-naphthalenediol and 2,7-naphthalenediol in cosmetics. Several parameters affecting sweeping-MEKC method were studied systematically and the separation conditions were optimized as 20 mM NaH2PO4–110 mM SDS and 40% (v/v) MeOH (pH 2.4), with −22 kV applied voltage and UV detection at 230 nm. The sample matrix is 60 mmol L−1 NaH2PO4 and sample introduction was performed at 3 psi for 6 s. Separation of the four naphthalenediols was completed in less than 17 min. Limit of detection (LOD) and limit of quantitation (LOQ) are 0.0045∼0.0094 μg mL−1 and 0.015∼0.031 μg mL−1. Linear relationship (r 2 > 0.999) is satisfactory at the range of 0.1–10 μg mL−1. The developed method has been successfully applied to the determination of the four naphthalenediols in real cosmetic samples, with recoveries in foundation, sun cream and lotion in the range of 92.3%∼106.8% and relative standard deviation (RSD) less than 4.15%. A HPLC method described in the National Standards of the People’s Republic of China was carried out for the comparison with the proposed method. The results showed that the proposed sweeping-MEKC method has the advantages of fast, low cost with comparative sensitivity.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

Selective Enrichment of Low-abundance Compounds in a Mixture by Capillary Electrophoresis

Recently, we developed a new approach for the selective enrichment of low-abundance compounds in biological samples by capillary electrophoresis. As a model test, the low-abundance compound lysozyme was successfully fractionated from a mixture containing high-abundance compound BSA (1:4500) using a custom-made apparatus. The feasibility of this approach for real complex biological samples was verified by rat serum, wherein three low-abundance proteins with high charge/mass ratios were detected.

Necessity and Challenges of Sample Preconcentration in Analysis of Multiple MicroRNAs by Capillary Electrophoresis

Thousands of putative microRNA (miRNA)-based cancer biomarkers have been reported, but none has been validated for approval by the Food and Drug Administration. One of the reasons for this alarming discrepancy is the lack of a method that is sufficiently robust for carrying out validation studies, which may require analysis of samples from hundreds of patients across multiple institutions and pooling the results together. The capillary electrophoresis (CE)-based hybridization assay proved to be more robust than reversed transcription polymerase chain reaction (the current standard), but its limit of quantification (LOQ) exceeds 10 pM while miRNA concentrations in cell lysates are below 1 pM. Thus, CE-based separation must be preceded by on-column sample preconcentration. Here, we explain the challenges of sample preconcentration for CE-based miRNA analyses and introduce a preconcentration method that can suit CE-based miRNA analysis utilizing peptide nucleic acid (PNA) hybridization probes. The method combines field-amplified sample stacking (FASS) with isotachophoresis (ITP). We proved that FASS-ITP could retain and concentrate both near-neutral PNA with highly negatively charged PNA-miRNA hybrids. We demonstrated that preconcentration by FASS-ITP could be combined with the CE-based separation of the unreacted PNA probes from the PNA-miRNA hybrids and facilitate improvement in LOQ by a factor of 140, down to 0.1 pM. Finally, we applied FASS-ITP-CE for the simultaneous detection of two miRNAs in crude cell lysates and proved that the method was robust when used in complex biological matrices. The 140-fold improvement in LOQ and the robustness to biological matrices will significantly expand the applicability of CE-based miRNA analysis, bringing it closer to becoming a practical tool for validation of miRNA biomarkers.

Simultaneous extraction of antibiotic and estrogen from animal blood serum using aqueous two-phase systems as predictor of environmental impact

Efficient analytical methods are required for optimizing dosage of veterinary antibiotics and hormones in order to reduce toxicity and antimicrobial resistance in the environment. Thus, the objective of this work was to develop a rapid and low-cost method for determination of hormone estradiol and antibiotic chlortetracycline in bovine and porcine blood serum by aqueous two-phase system (ATPS) extraction and capillary electrophoresis quantification. ATPS based on ionic liquid cholinium alaninate and citrate salt along with mixtures of protic and aprotic polar solvents were evaluated in terms of recovery of extraction (%R). The liquid-liquid equilibrium, phase diagrams, and tie lines are discussed. Antibiotic migrated to solvent-rich phase (R ≈ 89.0%) to all systems. Estradiol migrates to ionic liquid-rich phase; however, addition of 10% methanol changed partition to solvent-rich phase (R ≈ 89.7%). The method has high recovery and cleanliness, is cost-efficient, scalable, and hence is adequate for screening of antibiotics and hormones tested in animal blood serum for dosage optimization and to predict their environment.

Pre-Concentration and Analysis of Mycotoxins in Food Samples by Capillary Electrophoresis

Mycotoxins are considered one of the most dangerous agricultural and food contaminants. They are toxic and the development of rapid and sensitive analytical methods to detect and quantify them is a very important issue in the context of food safety and animal/human health. The need to detect mycotoxins at trace levels and to simultaneously analyze many different mycotoxin types became mandatory to protect public health. In fact, European Commission regulations specified both their limits in foodstuffs and official sample preparation protocols in addition to analytical methods to verify their presence. Capillary Electrophoresis (CE) includes different separation modes, allowing many versatile applications in food analysis and safety. In the context of mycotoxins, recent advances to improve CE sensitivity, particularly pre-concentration techniques or miniaturized systems, deserve remarkable attention, as they provide an interesting approach in the analysis of such contaminants in complex food matrices. This review summarizes the applications of CE combined with different pre-concentration approaches, which have been proposed in the literature (mainly) in the last ten years. A section is also dedicated to recent microchip–CE devices since they represent the most promising CE mode for this application.

Recent Progresses in Sensitive Determination of Drugs of Abuse by Capillary Electrophoresis

Background:

Today, “drugs of abuse” pose serious social problems such as many crimes, medical treatment costs, and economic repercussions. Several worldwide clinical laboratories use analytical separation methods to analyze their patient samples for drugs and poisons. In this way, they provide qualitative and quantitative data on the substances in various biological matrices (e.g., urine, plasma or serum, saliva, and breath).

Methods:

An extensive review of the published articles indicates that the use of Capillary Electrophoresis (CE) coupled with sensitivity enhancing methods is a very attractive area of interest in the assay of drugs of abuse.

Results:

This review was prepared to have a comprehensive study on applications of sensitivity enhancing methods on the determination of drugs of abuse especially from 2007 to present. The sample preconcentration approaches almost address all methods from online preconcentration (both electrophoretic and chromatographic-based methods) to offline preconcentration. Furthermore, detection system modification and capillary column fabrications were investigated in order to increase the detection sensitivity of complex samples in CE.

Conclusion:

The present review summarizes the most recent developments in the detection of drugs of abuse using CE. Although CE still has a limitation in sensitive detection, several publications in recent years have proposed valuable methods to overcome this problem.

Amplification of lysozyme signal detected in capillary electrophoresis using mixed polymer brushes coating with switchable properties

In this work, a mixed polymer brushes based on poly(2-methyl-2-oxazoline) (PMOXA) and poly(acrylic acid) (PAA) coated capillary with switchable protein adsorption/desorption properties was developed and applied for on-line extraction and preconcentration of lysozyme. The study of electroosmotic flow (EOF) and fluorescence microscope showed that the inner surface charge of PMOXA/PAA mixed brush coated capillary displayed the switchable behavior toward the change of pH value and ionic strength (I), and PMOXA/PAA mixed brushes coated capillary could adsorb high amounts of lysozyme at pH 7 (I = 10^-5 M), and the most of adsorbed lysozyme could then be desorbed at pH 3 (I = 10^-1 M). Subsequently, this coated capillary with switchable lysozyme adsorption/desorption ability was applied for on-line extraction and preconcentration of lysozyme during capillary electrophoresis (CE) performance. Under the process of on-line preconcentration, the detection signal (peak area) of lysozyme obtained in PMOXA/PAA coated capillary was 26 times that obtained in bare capillary under normal CE while the contour chain length of PAA was 1.56 times that of PMOXA. Moreover, the value of low detection limit (LOD) of lysozyme using above coated capillary under on-line preconcentration method reached to 4.5 × 10^-9 mg/mL, and 1 × 10⁵-fold sensitivity enhancement was realized for lysozyme as compared with the bare capillary under normal CE.

Micellar Electrokinetic Chromatography

Micellar electrokinetic chromatography (MEKC) is a mode of capillary electrophoresis that allows for the separation of neutral molecules in an electric field. Typically, neutral molecules move with electroosmotic flow (EOF) or bulk flow during electrophoretic separations resulting in no temporal resolution between mixtures of neutral analytes. Inclusion of surfactant micelles in the separation buffer allows for the separation of neutral analytes from one another through association with the micelle. Here we outline the implementation of MEKC for the separation of neutral molecules using a mixture of nitroaromatic explosives and their degradation products serving as a test analyte mixture.

Simulation and experiment of asymmetric electrode placement for electrophoretic exclusion in a microdevice

Electrophoretic exclusion (EE) is a counterflow gradient technique that exploits hydrodynamic flow and electrophoretic forces to exclude, enrich, and separate analytes. Resolution for this technique has been theoretically examined and the smallest difference in electrophoretic mobilities that can be completely separated is estimated to be 10^-13  cm² /Vs. Traditional and mesoscale systems have been used, whereas microfluidics offers a greater range of geometries and configurations towards approaching this theoretical limit. To begin to understand the impact of seemingly subtle changes to the entrance flow and the electric field configurations, three closely related microfluidic interfaces were modeled, fabricated, and tested. These interfaces consisted of systematically varying placement of an asymmetric electrode relative to a channel entrance: leading electrode placed outside the channel entrance, leading electrode aligned with the channel, and leading electrode placed within the channel. A charged fluorescent dye is used as a sensitive and accurate probe for the model and to test the concentration variation at these interfaces. Models and experiments focused on visualizing the concentration profile in areas of high temporal dynamics, thus providing a severe test of the models. Experimental data and simulation results showed strong qualitative agreement. The complexity of the electric and flow fields about this interface and the agreement between models and testing suggests the theoretical assessment capabilities can be used to faithfully design novel and more efficient interfaces.

Analysis of Three Compounds in Flos Farfarae by Capillary Electrophoresis with Large-Volume Sample Stacking

The aim of this study was to develop a method combining an online concentration and high-efficiency capillary electrophoresis separation to analyze and detect three compounds (rutin, hyperoside, and chlorogenic acid) in Flos Farfarae. In order to get good resolution and enrichment, several parameters such as the choice of running buffer, pH and concentration of the running buffer, organic modifier, temperature, and separation voltage were all investigated. The optimized conditions were obtained as follows: the buffer of 40 mM NaH₂P0₄-40 mM Borax-30% v/v methanol (pH 9.0); the sample hydrodynamic injection of up to 4 s at 0.5 psi; 20 kV applied voltage. The diode-array detector was used, and the detection wavelength was 364 nm. Based on peak area, higher levels of selective and sensitive improvements in analysis were observed and about 14-, 26-, and 5-fold enrichment of rutin, hyperoside, and chlorogenic acid were achieved, respectively. This method was successfully applied to determine the three compounds in Flos Farfarae. The linear curve of peak response versus concentration was from 20 to 400 µg/ml, 16.5 to 330 µg/mL, and 25 to 500 µg/mL, respectively. The regression coefficients were 0.9998, 0.9999, and 0.9991, respectively.

Microfluidic Techniques for Analytes Concentration

Microfluidics has been undergoing fast development in the past two decades due to its promising applications in biotechnology, medicine, and chemistry. Towards these applications, enhancing concentration sensitivity and detection resolution are indispensable to meet the detection limits because of the dilute sample concentrations, ultra-small sample volumes and short detection lengths in microfluidic devices. A variety of microfluidic techniques for concentrating analytes have been developed. This article presents an overview of analyte concentration techniques in microfluidics. We focus on discussing the physical mechanism of each concentration technique with its representative advancements and applications. Finally, the article is concluded by highlighting and discussing advantages and disadvantages of the reviewed techniques.

Nanomaterials for sample pretreatment prior to capillary electrophoretic analysis

Nanomaterials are, in analytical science, used for a broad range of purposes, covering the area of sample pretreatment as well as separation, detection and identification of target molecules.

Evaluation of the combination of micellar electrokinetic capillary chromatography with sweeping and cation selective exhaustive injection for the determination of 5-nitroimidazoles in egg samples

A methodology is presented for the sensitive determination of nitromidazole residues in egg by means of micellar electrokinetic capillary chromatography in combination with cation selective exhaustive injection and ultraviolet detection. Six compounds have been considered and the separation has been achieved in less than 12min in a 61.5-cm effective length capillary with 50-μm internal diameter. Phosphate buffer 44mM pH 2.5, containing 8% tetrahydrofurane and 123mM sodium dodecyl sulfate was employed as running buffer. Solid phase extraction has been employed for sample clean-up. The methodology has been successfully validated in hen eggs, obtaining method detection limits in the range of 2.1-5.0ng/g. Precision was studied in terms of repeatability and intermediate precision, with relative standard deviations lower than 18.0%. Recoveries were calculated in quail eggs and a commercial pasteurized egg white product, reaching over 70% for most of the considered 5-nitroimidazoles.

Analysis of Six β-Lactam Residues in Milk and Egg by Micellar Electrokinetic Chromatography with Large-Volume Sample Stacking and Polarity Switching

A new micellar electrokinetic chromatography method with large-volume sample stacking and polarity switching was developed to analyze amoxicllin, cephalexin, oxacillin, penicillin G, cefazolin, and cefoperazone in milk and egg. The important parameters influencing separation and enrichment factors were optimized. The optimized running buffer consisted of 10 mM phosphate and 22 mM SDS at pH 6.7. The sample size was 1.47 kPa × 690 s, the reverse voltage was 20 kV, and the electric current recovery was 95%. Under these optimum conditions, the enrichment factors of six β-lactams were 193-601. Their LODs were <0.26 ng/g, and LOQs were all 2 ng/g, which was only 1/50-1/2 of the maximum residual limits demanded by U.S. and Japanese regulations. The intraday and interday RSDs of method were lower than 3.70 and 3.91%, respectively. The method can be applied to determine these six antibiotic residues in egg and milk.

A dispersive liquid-liquid microextraction and chiral separation of carvedilol in human plasma using capillary electrophoresis

BACKGROUND

Development of simple, rapid and precise analysis of chiral drugs in biological samples is an important issue. Dispersive liquid-liquid microextraction in combination with CE using field amplified sample injection has been of interest because of its capability to analyze trace amount of drugs.

METHODS

Dispersive liquid-liquid microextraction-CE-field amplified sample injection was employed for chiral separation of carvedilol in human plasma using UV-DAD detector and the developed method has been validated according to US FDA method validation guideline for bioanalysis.

RESULTS

The method was linear over a concentration range of 12.5-100 ng/ml for each carvedilol enantiomer (R(2) = 0.998) and the mean recoveries ranged from 91 to 107%.

CONCLUSION

The method was adapted for sensitive, selective and rapid determination of carvedilol enantiomers in human plasma samples.

Sensitive Detection of Organophosphorus Pesticides in Medicinal Plants Using Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Combined with Sweeping Micellar Electrokinetic Chromatography

A simple, rapid, and sensitive method using ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) combined with sweeping micellar electrokinetic chromatography (sweeping-MEKC) has been developed for the determination of nine organophosphorus pesticides (chlorfenvinphos, parathion, quinalphos, fenitrothion, azinphos-ethyl, parathion-methyl, fensulfothion, methidathion, and paraoxon). The important parameters that affect the UA-DLLME and sweeping efficiency were investigated. Under the optimized conditions, the proposed method provided 779.0-6203.5-fold enrichment of the nine pesticides compared to the normal MEKC method. The limits of detection ranged from 0.002 to 0.008 mg kg(-1). The relative standard deviations of the peak area ranged from 1.2 to 6.5%, indicating the good repeatability of the method. Finally, the developed UA-DLLME-sweeping-MEKC method has been successfully applied to the analysis of the investigated pesticides in several medicinal plants, including Lycium chinense, Dioscorea opposite, Codonopsis pilosula, and Panax ginseng, indicating that this method is suitable for the determination of trace pesticide residues in real samples with complex matrices.

Polyamidoamine dendrimers as sweeping agent and stationary phase for rapid and sensitive open-tubular capillary electrophoretic determination of heavy metal ions

Polyamidoamine (PAMAM) dendrimer generation 2.5 was synthesized and evaluated as sweeping agent for in-column enrichment and as stationary phase for capillary electrochromatographic separation of heavy metal ions, viz., Pb(II), Cu(II), Hg(II), Zn(II) and Co(II), in a running buffer containing 4-(2-pyridylazo)resorcinol (PAR) as a chromogenic reagent. During experiment, a plug of aqueous PAMAM generation 2.5 solution was first introduced to the capillary, followed by electrokinetic injection of the heavy metal ions under a positive voltage. In this step, PAMAM acted as a sweeping agent, stacking the metal ions on the analyte/PAMAM boundary by forming metal ion-PAMAM complexes. The second preconcentration process occurred when PAR, a stronger ligand, moving toward the injection end under the electric field, reached and re-swept the metal ion-PAMAM zone, forming metal ion-PAR complexes. During separation, the neutral PAMAM moved toward the detector with the electroosmotic flow, dynamically coating the capillary wall, forming stationary phases that affected the separation of the metal ions. Due to the function of PAMAM, the detection sensitivity and resolution of the heavy metal ions improved significantly. Under the optimum conditions, the detection limits were 0.299, 0.184, 0.774, 0.182 and 0.047 μg/L for Pb(II), Cu(II), Hg(II), Zn(II) and Co(II), respectively. The method was successfully applied to the determination of heavy metals in snow, tap and rain water samples.

Theoretical and experimental studies on isotachophoresis in multi-moving chelation boundary system formed with metal ions and EDTA

In this paper, a general mode and theory of moving chelation boundary based isotachophoresis (MCB-based ITP), together with the concept of decisive metal ion (DMI) having the maximum complexation constant (lg Kmax) with the chelator, were developed from a multi-MCB (mMCB) system. The theoretical deductions were: (i) the reaction boundary velocities in the mMCB system at steady state were equal to each other, resulting in a novel MCB-based ITP separation of metal ions; (ii) the boundary directions and velocities in the system were controlled by the fluxes of chelator and DMI, rather than other metal ions; and (iii) a controllable stacking of metal ions could be simultaneously achieved in the developed system. To demonstrate the deductions, a series of experiments were conducted by using model chelator of EDTA and metal ions of Cu(II) and Co(II) due to characteristic colors of blue [Cu-EDTA](2-) and pink [Co-EDTA](2-) complexes. The experiments demonstrated the correctness of theoretical deductions, indicating the validity of the developed model and theory of ITP. These findings provide guidance for the development of MRB-based ITP separation and stacking of metal ions in biological sample matrix and heavy metal ions in environmental samples.