Separation and analysis of DNA sequence reaction products by capillary gel electrophoresis

Gels in Microscale Electrophoresis

Gel matrices are fundamental to electrophoresis analyses of biopolymers in microscale channels. Both capillary gel and microchannel gel electrophoresis systems have produced fundamental advances in the scientific community. These analytical techniques remain as foundational tools in bioanalytical chemistry and are indispensable in the field of biotherapeutics. This review summarizes the current state of gels in microscale channels and provides a brief description of electrophoretic transport in gels. In addition to the discussion of traditional polymers, several nontraditional gels are introduced. Advances in gel matrices highlighted include selective polymers modified to contain added functionality as well as thermally responsive gels formed through self-assembly. This review discusses cutting-edge applications to challenging areas of discovery in DNA, RNA, protein, and glycan analyses. Finally, emerging techniques that result in multifunctional assays for real-time biochemical processing in capillary and three-dimensional channels are identified.

Nanofluidic devices for the separation of biomolecules

Over the last 30-years, microchip electrophoresis and its applications have expanded due to the benefits it offers. Nanochip electrophoresis, on the other hand, is viewed as an evolving area of electrophoresis because it offers some unique advantages not associated with microchip electrophoresis. These advantages arise from unique phenomena that occur in the nanometer domain not readily apparent in the microscale domain due to scale-dependent effects. Scale-dependent effects associated with nanochip electrophoresis includes high surface area-to-volume ratio, electrical double layer overlap generating parabolic flow even for electrokinetic pumping, concentration polarization, transverse electromigration, surface charge dominating flow, and surface roughness. Nanochip electrophoresis devices consist of channels with dimensions ranging from 1 to 1000 nm including classical (1-100 nm) and extended (100 nm - 1000 nm) nanoscale devices. In this review, we highlight scale-dependent phenomena associated with nanochip electrophoresis and the utilization of those phenomena to provide unique biomolecular separations that are not possible with microchip electrophoresis. We will also review the range of materials used for nanoscale separations and the implication of material choice for the top-down fabrication and operation of these devices. We will also provide application examples of nanochip electrophoresis for biomolecule separations with an emphasis on nano-electrophoresis (nEP) and nano-electrochromatography (nEC).

Capillary electrophoresis applied to DNA: determining and harnessing sequence and structure to advance bioanalyses (2009-2014)

This review of capillary electrophoresis methods for DNA analyses covers critical advances from 2009 to 2014, referencing 184 citations. Separation mechanisms based on free-zone capillary electrophoresis, Ogston sieving, and reptation are described. Two prevalent gel matrices for gel-facilitated sieving, which are linear polyacrylamide and polydimethylacrylamide, are compared in terms of performance, cost, viscosity, and passivation of electroosmotic flow. The role of capillary electrophoresis in the discovery, design, and characterization of DNA aptamers for molecular recognition is discussed. Expanding and emerging techniques in the field are also highlighted.

Opto-electrokinetic manipulation for high-performance on-chip bioassays

This communication first demonstrates bio-compatibility of a recently developed opto-electrokinetic manipulation technique, using microorganisms. Aggregation, patterning, translation, trapping and size-based separation of microorganisms performed with the technique firmly establishes its usefulness for development of a high-performance on-chip bioassay system.

Capillary electrophoresis of DNA in uncrosslinked polymer solutions: evidence for a new mechanism of DNA separation

The electrophoretic separation of DNA molecules is usually performed in thin slabs of agarose or polyacrylamide gel. However, DNA separations can be achieved more rapidly and efficiently within a microbore fused silica capillary filled with an uncrosslinked polymer solution. An early assumption was that the mechanism of DNA separation in polymer solution-capillary electrophoresis (PS-CE) is the same as that postulated to occur in slab gel electrophoresis, i.e., that entangled polymer chains form a network of "pores" through which the DNA migrates. However, we have demonstrated that large DNA restriction fragments (2.0-23.1 kbp) can be separated by CE in extremely dilute polymer solutions, which contain as little as 6 parts per million [0.0006% (w/w)] of uncrosslinked hydroxyethyl cellulose (HEC) polymers. In such extremely dilute HEC solutions, far below the measured polymer entanglement threshold concentration, pore-based models of DNA electrophoresis do not apply. We propose a transient entanglement coupling mechanism for the electrophoretic separation of DNA in uncrosslinked polymer solutions, which is based on physical polymer/DNA interactions.

Multichannel capillary electrophoresis microdevice and instrumentation for in situ planetary analysis of organic molecules and biomarkers

The Multichannel Mars Organic Analyzer (McMOA), a portable instrument for the sensitive microchip capillary electrophoresis (CE) analysis of organic compounds such as amino acid biomarkers and polycyclic aromatic hydrocarbons (PAHs), is developed. The instrument uses a four-layer microchip, containing eight CE analysis systems integrated with a microfluidic network for autonomous fluidic processing. The McMOA has improved optical components that integrate 405 nm laser excitation with a linear-scanning optical system capable of multichannel real-time fluorescence spectroscopic analysis. The instrumental limit of detection is 6 pM (glycine). Microfluidic programs are executed to perform the automated sequential analysis of an amine-containing sample in each channel as well as eight consecutive analyses of alternating samples on the same channel, demonstrating less than 1% cross-contamination. The McMOA is used to identify the unique fluorescence spectra of nine components in a PAH standard and then applied to the analysis of a sediment sample from Lake Erie. The presence of benzo[a]pyrene and perylene in this sample is confirmed, and a peak coeluting with anthanthrene is disqualified based on spectral analysis. The McMOA exploits lab-on-a-chip technologies to fully integrate complex autonomous operations demonstrating the facile engineering of microchip-CE platforms for the analysis of a wide variety of organic compounds in planetary exploration.

High-sensitive analysis of DNA fragments by capillary gel electrophoresis using transient isotachophoresis preconcentration and fluorescence detection

In this report aimed on further development of a high-sensitivity capillary gel electrophoresis (CGE) method for analysis of DNA fragments, we firstly explored online transient isotachophoresis (tITP) preconcentration combined with fluorescence detection (FD). The fluorescence signal (excitation: 488 nm; emission: 590 nm) was generated using the intercalating dye of ethidium bromide (EB). It was found when the leading electrolyte (LE) was injected behind the sample zone, such a special tITP mode has significant advantages to solve the bubble formation issue and to improve the analytical performance stability. Two standard DNA samples, a 50 bp DNA step ladder and the phiX174/HaeIII digest, were used to evaluate the qualitative and quantitative abilities of the tITP-FD approach. A highly diluted sample (10,000-fold in the water, e.g. the phiX174/HaeIII digest diluted from 500 microg/ml to the 50 ng/ml level) was enriched and detected; the LOD was down to 0.09 ng/ml for the 72 bp fragment, apparently improved more than 1000-fold in comparison with UV detection. Although the RSD of peak areas (n=3) was around 15.5% for the sample was electrokinetically injected, good linearity of peak area response showed that the proposed method is suitable for quantitative analysis.

Polymer systems designed specifically for DNA sequencing by microchip electrophoresis: a comparison with commercially available materials

Electrophoresis-based DNA sequencing is the only proven technology for the de novo sequencing of large and complex genomes. Miniaturization of capillary array electrophoresis (CAE) instruments can increase sequencing throughput and decrease cost while maintaining the high quality and long read lengths that has made CAE so successful for de novo sequencing. The limited availability of high-performance polymer matrices and wall coatings designed specifically for microchip-sequencing platforms continues to be a major barrier to the successful development of a commercial microchip-sequencing instrument. It has been generally assumed that the matrices and wall coatings that have been developed for use in commercial CAE instruments will be able to be implemented directly into microchip devices with little to no change in sequencing performance. Here, we show that sequencing matrices developed specifically for microchip electrophoresis systems can deliver read lengths that are 150-300 bases longer on chip than some of the most widely used polymer-sequencing matrices available commercially. Additionally, we show that the coating ability of commercial matrices is much less effective in the borosilicate chips used in this study. These results lead to the conclusion that new materials must be developed to make high-performance microfabricated DNA-sequencing instruments a reality.

Capillary electrophoresis for studying drug–DNA interactions

The development of new drugs to treat disease by binding directly to DNA offers much promise but is reliant on methods to determine the relative affinity of the putative drug for different DNA sequences. Such methods should ideally be rapid and inexpensive as well as reliable. Use of capillary electrophoresis in simple silica columns offers such a method. The development of systems in which the solvent carries a soluble polymer allows the reliable separation of DNA oligomers, of 12-20 bp in length, which can then be titrated with the ligand in competition experiments. The results obtained are comparable with those obtained by footprinting and give direct graphical output, easily analysed for relative binding affinity.

Separation of oligonucleotides in N-methyl-formamide-based polymer matrices by capillary electrophoresis

N-Methylformamide (NMF)-based matrices for capillary electrophoretic separation of nucleic acids have been developed. The use of an organic solvent as liquid base for the separation matrices allowed a hydrophobic polymer, C16-derivatized 2-hydroxyethyl cellulose (HEC), to be employed as structural element in the sieving medium. With a matrix consisting of 5% w/v of this polymer dissolved in NMF containing 50 mM ammonium acetate, p(dA)12-18 and p(dA)40-60 oligonucleotides were baseline separated. The addition of ammonium acetate to the buffer and separation matrix resulted in enhanced separation efficiency. Furthermore, it was possible to tailor the sieving performance of the separation medium by the use of a binary mixture of C16-derivatized HEC and PVP. Differences in sieving behavior of the various matrices evaluated are discussed.

Experimental study of the formation of high-resistivity zones at the gel/buffer interface in CE

A novel, nondamaging method for experimental characterization of the formation and propagation of high-resistivity zones in CE, based on the measurement of time-dependent Joule heating on the outer capillary surface is proposed. The method detects propagation of resistive regions in capillaries in real time and allows the estimation of their velocity and resistance. The presented experimental data are in agreement with the results of the computer simulation as well as with previous data on the subject. The proposed method is useful for the development of new polymers as well as for the refinement and optimization of new CE protocols.

Sparsely cross-linked "nanogel" matrixes as fluid, mechanically stabilized polymer networks for high-throughput microchannel DNA sequencing

We have developed sparsely cross-linked "nanogels", subcolloidal polymer structures composed of covalently linked, linear polyacrylamide chains, as novel replaceable DNA sequencing matrixes for capillary and microchip electrophoresis. Nanogels were synthesized via inverse emulsion (water-in-oil) copolymerization of acrylamide and a low percentage (approximately 10(-4) mol %) of N,N-methylene bisacrylamide (Bis). Nanogels and nanogel networks were characterized by multiangle laser light scattering and rheometry, respectively, and tested for DNA sequencing in both capillaries and chips with four-color LIF detection. Typical nanogels have an average radius of approximately 230 nm, with approximately 75% of chains incorporating a Bis cross-linker. The properties and performance of nanogel matrixes are compared here to those of a linear polyacrylamide (LPA) network, matched for both polymer weight-average molar mass (M(w)) and the extent of interchain entanglements (c/c). At sequencing concentrations, the two matrixes have similar flow characteristics, important for capillary and microchip loading. However, because of the physical network stability provided by the internally cross-linked structure of the nanogels, substantially longer average read lengths are obtained under standard conditions with the nanogel matrix at a 98.5% accuracy of base-calling (for CE: 680 bases, an 18.7% improvement over LPA, with the best reads as long as 726 bases, compared to 568 bases for the LPA matrix). We further investigated the use of the nanogel matrixes in a high-throughput microfabricated DNA sequencing device consists of 96 separation channels densely fabricated on a 6-in. glass wafer. Again, preliminary DNA sequencing results show that the nanogel matrixes are capable of delivering significantly longer average read length, compared to an LPA matrix of comparable properties. Moreover, nanogel matrixes require 30% less polymer per unit volume than LPA. The addition of a small amount of low molar mass LPA or ultrahigh molar mass LPA to the optimized nanogel sequencing matrix further improves read length as well as the reproducibility of read length (RSD < 1.6%). This is the first report of a replaceable DNA sequencing matrix that provides better performance than LPA, in a side-by-side comparison of polymer matrixes appropriately matched for molar mass and the extent of interchain entanglements. These results could have significant implications for the improvement of microchip-based DNA sequencing technology.

Automated sequence screening of the entire dystrophin cDNA in Duchenne dystrophy: point mutation detection

This is the first report of direct sequencing of the complete 11 kb coding sequence of the dystrophin gene affording high sensitivity for all types of mutations of both coding sequence and splicing. Direct automated capillary gel sequence analysis of dystrophin reverse-transcribed polymerase chain reaction (RT-PCR) products was carried out in 15 Duchenne muscular dystrophy (DMD) patient muscle biopsies (170,000 bp sequenced). We identified mutations in 67% of patients tested (10/15); including premature stop codons (n = 5) and small deletions/duplications (n = 5). Mutation-negative patients (n = 5) were also negative for promoter mutations. All were tested for the possibility of transcription abnormalities using quantitative multiplex fluorescence polymerase chain studies (QMF-PCR), however, equal ratios of mRNA transcripts were identified at the 5'and 3' regions, with mild reduction in overall quantity, suggesting that transcription abnormalities were less likely. We suggested that such patients might have a problem with the 3.5 kb 3' UTR, polyA site or undetected stop codons. It is also possible that splicing defects could result in addition of intron sequence which could lead to preferential amplification of low level residual normal transcript skipping.

Low Viscous Separation Media for Genomics and Proteomics Analysis on Microchip Electrophoresis System

Microchip electrophoresis has widely grown during the past few years, and it has showed a significant result as a strong separation tool for genomic as well as proteomic researches. To enhance and expand the role of microchip electrophoresis, several studies have been proposed especially for the low viscous separation media, which is an important factor for the success of microchip with its narrow separation channels. In this paper we show an overview for the done researches in the field of low viscous media developed for the use in microchip electrophoresis. For genomic separation studies polyhydroxy additives have been used enhance the separation of DNA at low polymer concentration of HPMC (Hydroxypropylmethyl cellulose) which could keep the viscosity low. Mixtures of poly(ethylene oxide) as well as Hydroxyporpyl cellulose have been successfully introduced for chip separation. Furthermore high molecular mass polyacrylamides at low concentrations have been studied for DNA separation. A mixture of polymer nanoparticle with conventional polymers could show a better resolution for DNA at low concentration of the polymer. For the proteomic field isoelectric focusing on chip has been well overviewed since it is the most viscous separation media which is well used for the protein separation. The different types of isoelectric focusing such as the ampholyte-free type, the thermal type as well as the ampholyte-depended type have been introduced in this paper. Isoelectric focusing on chip with its combination with sodium dodecyl sulfate (SDS) page or free solution could give a better separation. Several application for this low viscous separation medias for either genomic or proteomic could clearly show the importance of this field.

Advances in sequencing technology

Faster sequencing methods will undoubtedly lead to faster single nucleotide polymorphism (SNP) discovery. The Sanger method has served as the cornerstone for genome sequence production since 1977, close to almost 30 years of tremendous utility [Sanger, F., Nicklen, S., Coulson, A.R, DNA sequencing with chain-terminating inhibitors, Proc. Natl. Acad. Sci. U.S.A. 74 (1977) 5463-5467]. With the completion of the human genome sequence [Venter, J.C. et al., The sequence of the human genome, Science 291 (2001) 1304-1351; Lander, E.S. et al., Initial sequencing and analysis of the human genome, Nature 409 (2001) 860-921], there is now a focus on developing new sequencing methodologies that will enable "personal genomics", or the routine study of our individual genomes. Technologies that will lead us to this lofty goal are those that can provide improvements in three areas: read length, throughput, and cost. As progress is made in this field, large sections of genomes and then whole genomes of individuals will become increasingly more facile to sequence. SNP discovery efforts will be enhanced lock-step with these improvements. Here, the breadth of new sequencing approaches will be summarized including their status and prospects for enabling personal genomics.

Microfabricated systems for nucleic acid analysis

High throughput and automation of nucleic acid analysis are required in order to exploit the information that has been accumulated from the Human Genome Project. Microfabricated analytical systems enable parallel sample processing, reduced analysis-times, low consumption of sample and reagents, portability, integration of various analytical procedures and automation. This review article discusses miniaturized analytical systems for nucleic acid amplification, separation by capillary electrophoresis, sequencing and hybridization. Microarrays are also covered as a new analytical tool for global analysis of gene expression. Thus. instead of studying the expression of a single gene or a few genes at a time we can now obtain the expression profiles of thousands of genes in a single experiment.

Microfabricated electrophoresis systems for DNA sequencing and genotyping applications: current technology and future directions

Many routine genomic-analysis assays rely on gel electrophoresis to perform size-selective fractionation of DNA fragments in the size range below 1 kb in length. Over the past decade, impressive progress has been made towards the development of microfabricated electrophoresis systems to conduct these assays in a microfluidic lab-on-a-chip format. Since these devices are inexpensive, require only nanolitre sample volumes, and do not rely on the availability of a pre-existing laboratory infrastructure, they are readily deployable in remote field locations for use in a variety of medical and biosensing applications. The design and construction of microfabricated electrophoresis devices poses a variety of challenges, including the need to achieve high-resolution separations over distances of a few centimetres or less, and the need to easily interface with additional microfluidic components to produce self-contained integrated DNA-analysis systems. In this paper, we review recent efforts to develop devices to satisfy these requirements and live up to the promise of fulfilling the growing need for inexpensive portable genomic-analysis equipment.

Concentration of DNA in a Flowing Stream for High-Sensitivity Capillary Electrophoresis

A novel sample pretreatment device is described, and its application to the concentration and purification of crude DNA samples in a flowing stream for subsequent capillary electrophoresis is demonstrated. The device consists of two gap junctions, each covered with a conductive membrane material and built upon a flow channel made of PEEK tubing. Upon the application of an electric field between the junctions, the negatively charged DNA fragments can resist the hydrodynamic flow stream and are trapped between the junctions. DNA fragments dissolved in microliter volumes are captured in a nanoliter-sized band by simply pushing the sample solution through the device. Depending on their electrophoretic mobility, other interfering materials in a crude sample can be removed from the trapped DNA fragments by washing. The selective permeability of the membrane to small ions allows efficient desalting. The concentrated and purified DNA fragments are released by simply turning off or reversing the electric field. Recovery is up to 95%. Performance of the device was evaluated using crude products of fluorescent dye-primer cycle-sequencing reactions. Compared to these crude reaction products, samples purified in the capture device and subsequently collected showed dramatically enhanced signal and resolution when run on a conventional capillary-electrophoresis instrument. Furthermore, the device could be connected in-line to a capillary system for direct injection. The device has great potential for enabling lab-on-a-chip systems to be used with real-world samples.

High-efficiency DNA ligation for clamp attachment without polymerase chain reaction

We coupled ligation with mass action to achieve high-efficiency clamp attachment without polymerase chain reaction (PCR). Using a 10-fold molar excess of a GC-rich clamp of synthesized and hybridized oligonucleotides, we achieved the maximum clamp-ligation efficiency in which the clamp was ligated to >95% of 10(10)-10(12) restriction ends of a PCR-amplified fragment. The maximum efficiency was confirmed by ligating the clamp to 10(11)-10(12) restriction ends of human genomic DNA. Our approach can be added to a constant denaturant capillary electrophoresis (CDCE)-based method of analyzing rare point mutants at fractions as low as 10(-6); such mutants appear as small copy numbers in the initial samples. This CDCE-based method alone is applicable to only those DNA sequences juxtaposed with an internally occurring clamp of a higher melting temperature in genomic DNA. Since such sequences represent 9% of the human genome, the addition of clamp ligation significantly increases the scanning range for the human genome without reducing the initial mutant copy numbers. Furthermore, clamp ligation/attachment without PCR prevents PCR-created mutants from interfering with rare mutational analysis. In addition to those applications seeking high-efficiency DNA ligation, our approach can be generally applied to ligation of restriction ends.

The use of light scattering for precise characterization of polymers for DNA sequencing by capillary electrophoresis

The ability of a polymer matrix to separate DNA by capillary electrophoresis (CE) is strongly dependent upon polymer physical properties. In particular, recent results have shown that DNA sequencing performance is very sensitive to both the average molar mass and the average coil radius of the separation matrix polymers, which are affected by both polymer structure and polymer-solvent affinity. Large polymers with high average molar mass provide the best DNA sequencing separations for CE, but are also the most challenging to characterize with accuracy. The methods most commonly used for the characterization of water-soluble polymers with application in microchannel electrophoresis have been gel permeation chromatography (GPC) and intrinsic viscosity measurements, but the limitations and potential inaccuracies of these approaches, particularly for large or novel polymers and copolymers, press the need for a more universally accurate method of polymer molar mass profiling for advanced DNA separation matrices. Here, we show that multi-angle laser light scattering (MALLS) measurements, carried out either alone or in tandem with prior on-line sample fractionation by GPC, can provide accurate molar mass and coil radius information for polymer samples that are useful for DNA sequencing by CE. Wider employment of MALLS for characterization of novel polymers designed as DNA separation matrices for microchannel electrophoresis should enable more rapid optimization of matrix properties and formulation, and assist in the development of novel classes of polymer matrices.

DNA capillary electrophoresis in entangled dynamic polymers of surfactant molecules

Aqueous solutions of monomeric nonionic surfactants, n-alkyl polyoxyethylene ethers (C16E6, C16E8, C14E6), can be used as sieving matrixes for the separation of DNA fragments by capillary electrophoresis. Unlike ordinary polymer solutions, these surfactant solutions behave as dynamic polymers. By combining the "reversible gel" theory of DNA electrophoresis and the static and dynamic properties of wormlike surfactant micelles, a model is developed for describing the migration behavior of DNA molecules in these solutions. According to the model, the separation limit can be extended at low surfactant concentrations. Surfactant solutions as a separation medium provide many advantages over ordinary polymers, such as ease of preparation, solution homogeneity, stable structure, low viscosity, and self-coating property for reducing electroosmotic flow. More importantly, the properties of wormlike micelles (micelle size, entanglement concentration) can be adjusted by simply changing the monomer concentration, denaturant, and temperature to allow the separation of different size ranges of DNA fragments. Fast separation is achieved for DNA fragments ranging from 10 bp to 5 kb by using bare fused-silica columns. DNA sequencing fragments of BigDye G-labeled M13 up to 600 bases were separated within 60 min.

Highly sensitive and direct detection of DNA fragments using a laser-induced capillary vibration effect

A pulsed laser-induced stationary wave capillary vibration detection method was applied to the sensitive detection of capillary gel electrophoresis, and the direct detection of non-labeled nucleic acids, such as DNA sequencing products, was demonstrated. An excimer laser operating at 248 nm was used as a CVL excitation source, and polynucleotides were sensitively detected without derivatization. From an investigation on the endurance of several matrixes to pulsed laser irradiation, a polyacrylamide without a cross-linker (0%C) was found to have adequate endurance, and it exhibited no serious damage during an analysis. A cytosine-terminated sequence reaction product was detected with a sensitivity close to that of laser-induced fluorometry (LIF). These results suggest the feasibility of the highly sensitive detection of ultramicro amounts of biological materials without a pre- or post-column derivatization, which has usually been required in sensitive detection procedures, such as LIF. Furthermore, the feasibility of a novel DNA sequencing method is also suggested.

DNA separations in microfabricated devices with automated capillary sample introduction

A novel method is presented for automated injection of DNA samples into microfabricated separation devices via capillary electrophoresis. A single capillary is used to electrokinetically inject discrete plugs of DNA into an array of separation lanes on a glass chip. A computer-controlled micromanipulator is used to automate this injection process and to repeat injections into five parallel lanes several times over the course of the experiment. After separation, labeled DNA samples are detected by laser-induced fluorescence. Five serial separations of 6-carboxyfluorescein (FAM)-labeled oligonucleotides in five parallel lanes are shown, resulting in the analysis of 25 samples in 25 min. It is estimated that approximately 550 separations of these same oligonucleotides could be performed in one hour by increasing the number of lanes to 37 and optimizing the rate of the manipulator movement. Capillary sample introduction into chips allows parallel separations to be continuously performed in serial, yielding high throughput and minimal need for operator intervention.

Laser-induced fluorescence detection by liquid core waveguiding applied to DNA sequencing by capillary electrophoresis

A new laser-induced fluorescence detector for capillary electrophoresis (CE) is described. The detector is based on transverse illumination and collection of the emitted fluorescent light via total internal reflection along the separation capillary. The capillary is coated with a low refractive index fluoropolymer and serves as a liquid core waveguide (LCW). The emitted light is detected end-on with a CCD camera at the capillary exit. The observed detection limit for fluorescein is 2.7 pM (550 ymol) in the continuous-flow mode and 62 fM in the CE mode. The detector is applied to DNA sequencing. One-color G sequencing is performed with single-base resolution and signal-to-noise ratio approximately 250 for peaks around 500 bases. The signal-to-noise ratio is approximately 50 for peaks around 950 bases. Full four-color DNA sequencing is also demonstrated. The high sensitivity of the detector is suggested to partly be due to the efficient rejection of scattered laser light in the LCW. The concept should be highly suitable for capillary array detection.

Construction and evaluation of a capillary array DNA sequencer based on a micromachined sheath-flow cuvette

A capillary array electrophoresis DNA sequencer is reported based on a micromachined sheath-flow cuvette as the detection chamber. This cuvette is equipped with a set of micromachined features that hold the capillaries in precise registration to ensure uniform spacing between the capillaries, in order to generate uniform hydrodynamic flow in the cuvette. A laser beam excites all of the samples simultaneously, and a microscope objective images fluorescence onto a set of avalanche photodiodes, which operate in the analog mode. A high-gain transimpedance amplifier is used for each photodiode, providing high duty-cycle detection of fluorescence.

Capillary array scanner for time-resolved detection and identification of fluorescently labelled DNA fragments

The first capillary array scanner for time-resolved fluorescence detection in parallel capillary electrophoresis based on semiconductor technology is described. The system consists essentially of a confocal fluorescence microscope and a x,y-microscope scanning stage. Fluorescence of the labelled probe molecules was excited using a short-pulse diode laser emitting at 640 nm with a repetition rate of 50 MHz. Using a single filter system the fluorescence decays of different labels were detected by an avalanche photodiode in combination with a PC plug-in card for time-correlated single-photon counting (TCSPC). The time-resolved fluorescence signals were analyzed and identified by a maximum likelihood estimator (MLE). The x,y-microscope scanning stage allows for discontinuous, bidirectional scanning of up to 16 capillaries in an array, resulting in longer fluorescence collection times per capillary compared to scanners working in a continuous mode. Synchronization of the alignment and measurement process were developed to allow for data acquisition without overhead. Detection limits in the subzeptomol range for different dye molecules separated in parallel capillaries have been achieved. In addition, we report on parallel time-resolved detection and separation of more than 400 bases of single base extension DNA fragments in capillary array electrophoresis. Using only semiconductor technology the presented technique represents a low-cost alternative for high throughput DNA sequencing in parallel capillaries.

DNA sequencing by capillary array electrophoresis and microfabricated array systems

To comply with the current needs for high-speed DNA sequencing analysis, several instruments and innovative technologies have been introduced by several groups in recent years. This review article discusses and compares the issues regarding high-throughput DNA sequencing by electrophoretic methods in miniaturized systems, such as capillaries, capillary arrays, and microchannels. Initially, general features of several capillary array designs (including commercial ones) will be considered, followed by similar analyses with microfabricated array electrophoretic devices and how they can contribute to the success of large sequencing projects.

Applications of constant denaturant capillary electrophoresis/high-fidelity polymerase chain reaction to human genetic analysis

Constant denaturant capillary electrophoresis (CDCE) permits high-resolution separation of single-base variations occurring in an approximately 100 bp isomelting DNA sequence based on their differential melting temperatures. By coupling CDCE for highly efficient enrichment of mutants with high-fidelity polymerase chain reaction (hifi PCR), we have developed an analytical approach to detecting point mutations at frequencies equal to or greater than 10(-6) in human genomic DNA. In this article, we present several applications of this approach in human genetic studies. We have measured the point mutational spectra of a 100 bp mitochondrial DNA sequence in human tissues and cultured cells. The observations have led to the conclusion that the primary causes of mutation in human mitochondrial DNA are spontaneous in origin. In the course of studying the mitochondrial somatic mutations, we have also identified several nuclear pseudogenes homologous to the analyzed mitochondrial DNA fragment. Recently, through developments of the means to isolate the desired target sequences from bulk genomic DNA and to increase the loading capacity of CDCE, we have extended the CDCE/hifi PCR approach to study a chemically induced mutational spectrum in a single-copy nuclear sequence. Future applications of the CDCE/hifi PCR approach to human genetic analysis include studies of somatic mitochondrial mutations with respect to aging, measurement of mutational spectra of nuclear genes in healthy human tissues and population screening for disease-associated single nucleotide polymorphisms (SNPs) in large pooled samples.

Ultra-high throughput rotary capillary array electrophoresis scanner for fluorescent DNA sequencing and analysis

We have constructed a rotary confocal fluorescence scanner and capillary array electrophoresis system that is designed to analyze over 1000 DNA sequencing or fragment sizing separations in parallel. Capillaries are arranged around the surface of a cylinder and a rotating objective in the middle of the cylinder excites and collects fluorescence from labeled DNA fragments as they pass the capillary detection window. The capillaries are pressure-filled with a replaceable matrix and the samples are electrokinetically injected in parallel from a stainless steel microtiter plate at the cathode end. We demonstrate that the instrument is capable of producing four-color data from all capillaries at a scan rate of 4 Hz (corresponding to a linear scan velocity of 121 cm/s). M13 sequencing data were obtained using a 128 capillary array mounted in half of the first quadrant of the scanner. In this initial run, read lengths greater than 500 bases were obtained in over 60% of the capillaries.

Optimization of high-speed DNA sequencing on microfabricated capillary electrophoresis channels

DNA sequencing separations have been performed in microfabricated electrophoresis channels with the goal of determining whether high-quality sequencing is feasible with these microdevices. The separation matrix, separation temperature, channel length and depth, injector size, and injection parameters were optimized. DNA fragment sizing separations demonstrated that 50-micron-deep channels provide the best sensitivity for our detection configuration. One-color sequencing separations of single-stranded M13mp18 DNA on 3% linear polyacrylamide (LPA) were used to optimize the twin-T injector size, injection conditions, and temperature. The best one-color separations were observed with a 250-micron twin-T injector, an injection time of 60 s, and a temperature of 35 degrees C. The first 500 bases appeared in 9.2 min with a resolution of > 0.5, and the separation extended to 700 bases. The best four-color sequencing separations were performed using 4% LPA, a temperature of 40 degrees C, and a 100-micron twin-T injector. These four-color runs were complete in only 20 min, could be automatically base-called using BaseFinder to over 600 bp after the primer, and were 99.4% accurate to 500 bp. These results significantly advance the quality of microchip-based electrophoretic sequencing and indicate the feasibility of performing high-speed genomic sequencing with microfabricated electrophoretic devices.

High speed separation of DNA fragments by capillary electrophoresis in poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock polymer

The high speed separation of DNA fragments by using a triblock copolymer, 25% w/v F127 (PEO99PPO69PEO99 with PEO and PPO denoting polyethylene oxide and polypropylene oxide, respectively) which is easy to handle and does not need coating of the quartz capillary, has been investigated. Two ways to decrease the run time are presented: one is to shorten the effective capillary length and the other to increase the electric field strength. In a short capillary, the sieving ability of the separation medium versus the initial band width, and the band width spreading as a function of distance traveled dominate the resolution; at high electric field strength, Joule heating could deteriorate the separation. By taking both effects into account, the phi X174/HaeIII digest could be separated within 100 s by using an 8 mm effective length, 50 microns diameter capillary operating at 300 V/cm.

A three-wavelength labeling approach for DNA sequencing using energy transfer primers and capillary electrophoresis

Capillary electrophoresis DNA sequencing has been accomplished by using four different energy transfer primers and three fluorescence detection channels. Methods have also been developed to deconvolve the three-color data into the four base concentrations. The nonnegative least squares and model selection method resulted in the best accuracy. The three-color data were compared to sequencing data obtained using four detection channels and four energy transfer primers. The average accuracy rates obtained over three 500 base M13mp18 runs using three-color coding were 96% including 18 uncallable compressions and 99.6% if these compressions are excluded. The average accuracy rate obtained using four-color coding was 96.3% including 18 uncallable compressions and 99.9% if these compressions are excluded. Although it is unlikely that three-color schemes will replace four-color sequencing, these methods have exposed basic concepts that will be useful in the development of higher-order multiplex coding methods for DNA analysis.

DNA cycle sequencing of a common restriction fragment of Staphylococcus aureus bacteriophages by capillary electrophoresis using replaceable linear polyacrylamide

The nucleotide sequence of a part of a 4.9 kbp common restriction fragment isolated from Staphylococcus aureus bacteriophage (bacterial virus) 3A has been determined by capillary electrophoresis (CE). The fast separation of sequencing fragments in linear polyacrylamide solution at a temperature of 55 degrees C allowed the reading of more than 650 bases of sequence in 60 min. The single strand (ss)DNA fragments were prepared by cycle sequencing with fluorescently labeled dideoxy-terminators on the cloned bacteriophage DNA template. With respect to analysis speed, sequence read-length, low sample consumption and automation, CE offers a simple, labor-saving and inexpensive procedure for DNA sequencing. Operating the CE columns at elevated temperature proved to be a rapid procedure capable of extending sequence read-length. The resulting sequence of the common restriction fragment can be used for the preparation of specific primers and oligonucleotide hybridization probes for identification of Staphylococcus aureus bacteriophages and/or prophages belonging to the bacteriophage species 3A.

High-throughput genetic analysis using microfabricated 96-sample capillary array electrophoresis microplates

Capillary array electrophoresis (CAE) microplates that can analyze 96 samples in less than 8 min have been produced by bonding 10-cm-diameter micromachined glass wafers to form a glass sandwich structure. The microplate has 96 sample wells and 48 separation channels with an injection unit that permits the serial analysis of two different samples on each capillary. An elastomer sheet with an 8 by 12 array of holes is placed on top of the glass sandwich structure to define the sample wells. Samples are addressed with an electrode array that makes up the third layer of the assembly. Detection of all lanes with high temporal resolution was achieved by using a laser-excited confocal fluorescence scanner. To demonstrate the functionality of these microplates, electrophoretic separation and fluorescence detection of a restriction fragment marker for the diagnosis of hereditary hemochromatosis were performed. CAE microplates will facilitate all types of high-throughput genetic analysis because their high assay speed provides a throughput that is 50 to 100 times greater than that of conventional slab gels.

Fast detection of a (CA)18 microsatellite repeat in the IgE receptor gene by capillary electrophoresis with laser-induced fluorescence detection

The optimum separation conditions of polymerase chain reaction (PCR) products have been found for high-speed capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection. DNA fragments obtained after PCR amplification of the region covering the (CA)18 microsatellite repeat in nitron 5 of the gene for FcERIbeta, a high affinity glycoprotein receptor for IgE, located on chromosome 11 (11q13), were analyzed with the aim of investigating the repeat polymorphism. The results of polyacrylamide slab gel electrophoresis (PAGE), agarose gel electrophoresis, CE with absorbance detector and CE with LIF are compared. The CE with LIF proved to shorten analysis time by a factor of 100 when compared to slab gel electrophoresis. CE-LIF utilizes a short capillary with an effective length of 6.3 cm and electric field strength from 100 to 550 V/cm. The respective PCR products of sizes from 116 to 210 base pairs (bp) were analyzed in 3 min.

Selectivity of anion exchange chromatography and capillary gel electrophoresis for the analysis of phosphorothioate oligonucleotides

The complementary nature of anion exchange chromatography and capillary gel electrophoresis for oligonucleotide analysis is demonstrated by evaluating a comprehensive series of authentic deletion sequences and partial phosphodiester analogs of five phosphorothioate oligonucleotides of different base composition and sequence. While anion exchange HPLC is sensitive to differences in backbone length of phosphorothioate oligonucleotides, oligomers with length difference of one base unit are not resolved. Capillary gel electrophoresis, on the other hand, has excellent single-base resolution while being relatively insensitive to phosphate in the phosphorothioate backbone. The data definitively establish the necessity of employing both separation techniques for adequate characterization of lower order process-related impurities potentially found in synthetic phosphorothioate oligonucleotides.

DNA sequencing by capillary electrophoresis

Capillary electrophoresis has been under development for DNA sequencing since 1990. This development has traveled down two parallel tracks. The first track studied the details of DNA separation by gel electrophoresis. Early work stressed rapid separations at high electric fields, which reached the extreme of a 3.5 min sequencing run at 1200 V/cm. While fast separations are useful in clinical resequencing applications for mutation detection, long read-length is important in genomic sequencing. Unfortunately, sequence read-length degrades as electric field and sequencing speed increases; this tradeoff between read-length and sequencing speed appears to be a fundamental result of the physics of DNA separations in a polymer. The longest sequence sequencing read-lengths have been obtained at modest electric fields, high temperature, and with low concentration noncrosslinked polymers. In parallel with our understanding of DNA separations, the second track of DNA sequencing development considered the design of large-scale capillary instruments, wherein hundreds of DNA samples can be sequenced in parallel. Real-world application of these very high throughput capillary electrophoresis systems will require significant investment in sample preparation technology.