Determination of toxic nitrophenols in the atmosphere by high-performance liquid chromatography

Furan-Dihydroquinazolinone Based Fluorescent Nanoprobe for Selective Recognition of 4-Nitrophenol: A Spectofluorimetric Approach

Fluorescent organic nanoparticles (FONPs) have attracted much attention as a practicable and effective platform for detection applications. The present article describes the preparation of FONPs derived from the quinazolinone-based 2-(furan-2-yl)-2,3-dihydroquinazolin-4(1H)-one derivative FHDQ. Self-assembly of FHDQ in an aqueous medium resulted in the formation of FONPs through H-type aggregation and showed excellent fluorescence properties. The presence of other coexisting species solutions did not affect the selective fluorescence quenching observed with the addition of 4-nitrophenol (4-NP). The photophysical properties, i.e., UV-Vis absorbance, fluorescence emission, and lifetime measurements together with zeta particle sizer, support excited-state complex formation followed by a dynamic fluorescence quenching phenomenon in the emission of FDHQNPs. In the concentration range of 0 to 36 μg.[Formula: see text], the detection limit of this turn-off sensor FDHQNPs against 4-NP was determined to be 0.01611 μM. Finally, the practicability of the FDHQNPs for the analysis of 4-NP in environmental samples was demonstrated.

Advances in solid-phase extraction techniques: Role of nanosorbents for the enrichment of antibiotics for analytical quantification

Antibiotics are life-saving medications for treating bacterial infections; however it has been discovered that resistance developed by bacteria against these incredible agents is the primary contributing factor to rising global mortality rates. The fundamental cause of the emergence of antibiotic resistance in bacteria is the presence of antibiotic residues in various environmental matrices. Although antibiotics are present in diluted form in environmental matrices like water, consistent exposure of bacteria to these minute levels is enough for the resistance to develop. So, identifying these tiny concentrations of numerous antibiotics in various and complicated matrices will be a crucial step in controlling their disposal in those matrices. Solid phase extraction, a popular and customizable extraction technology, was developed according to the aspirations of the researchers. It is a unique alternative technique that could be implemented either alone or in combination with other approaches at different stages because of the multitude of sorbent varieties and techniques. Initially, sorbents are utilized for extraction in their natural state. The basic sorbent has been modified over time with nanoparticles and multilayer sorbents, which have indeed helped to accomplish the desired extraction efficiencies. Among the current traditional extraction techniques such as liquid-liquid extraction, protein precipitation, and salting out techniques, solid-phase extractions (SPE) with nanosorbents are most productive because, they can be automated, selective, and can be integrated with other extraction techniques. This review aims to provide a broad overview of advancements and developments in sorbents with a specific emphasis on the applications of SPE techniques used for antibiotic detection and quantification in various matrices in the last two decades.

Revealing Internal Rotation and 14N Nuclear Quadrupole Coupling in the Atmospheric Pollutant 4-Methyl-2-nitrophenol: Interplay of Microwave Spectroscopy and Quantum Chemical Calculations

The structure and interactions of oxygenated aromatic molecules are of atmospheric interest due to their toxicity and as precursors of aerosols. Here, we present the analysis of 4-methyl-2-nitrophenol (4MNP) using chirped pulse and Fabry-Pérot Fourier transform microwave spectroscopy in combination with quantum chemical calculations. The rotational, centrifugal distortion, and ¹⁴N nuclear quadrupole coupling constants of the lowest-energy conformer of 4MNP were determined as well as the barrier to methyl internal rotation. The latter has a value of 106.4456(8) cm^-1, significantly larger than those from related molecules with only one hydroxyl or nitro substituent in the same para or meta positions, respectively, as 4MNP. Our results serve as a basis to understand the interactions of 4MNP with atmospheric molecules and the influence of the electronic environment on methyl internal rotation barrier heights.

Electrocatalysis of 2,6-Dinitrophenol Based on Wet-Chemically Synthesized PbO-ZnO Microstructures

In this approach, a reliable 2,6-dinitrophenol (2,6-DNP) sensor probe was developed by applying differential pulse voltammetry (DPV) using a glassy carbon electrode (GCE) decorated with a wet-chemically prepared PbO-doped ZnO microstructures’ (MSs) electro-catalyst. The nanomaterial characterizing tools such as FESEM, XPS, XRD, UV-vis., and FTIR were used for the synthesized PbO-doped ZnO MSs to evaluate in detail of their optical, structural, morphological, functional, and elemental properties. The peak currents obtained in DPV analysis of 2,6-DNP using PbO-doped ZnO MSs/GCE were plotted against the applied potential to result the calibration of 2,6-DNP sensor expressed by ip(µA) = 1.0171C(µM) + 22.312 (R2 = 0.9951; regression co-efficient). The sensitivity of the proposed 2,6-DNP sensor probe obtained from the slope of the calibration curve as well as dynamic range for 2,6-DNP detection were found as 32.1867 µAµM−1cm−2 and 3.23~16.67 µM, respectively. Besides this, the lower limit of 2,6-DNP detection was calculated by using signal/noise (S/N = 3) ratio and found as good lowest limit (2.95 ± 0.15 µM). As known from the perspective of environment and healthcare sectors, the existence of phenol and their derivatives are significantly carcinogenic and harmful which released from various industrial sources. Therefore, it is urgently required to detect by electrochemical method with doped nanostructure materials. The reproducibility as well as stability of the working electrode duration, response-time, and the analysis of real environmental-samples by applying the recovery method were measured, and found outstanding results in this investigation. A new electrochemical research approach is familiarized to the development of chemical sensor probe by using nanostructured materials as an electron sensing substrate for the environmental safety (ecological system).

Cytotoxicity and oxidative stress induced by atmospheric mono-nitrophenols in human lung cells

Nitrophenols (NPs) are hazardous pollutants found in various environmental matrices, including ambient fine particulate matter (PM_2.5), agricultural residues, rainwater, wildfires, and industrial wastes. This study showed for the first time the effect of three pure nitrophenols and their mixture on human lung cells to provide basic understanding of the NP influence on cell elements and processes. We identified NPs in ambient PM_2.5 and secondary organic aerosol (SOA) particles generated from the photooxidation of monocyclic aromatic hydrocarbons in the U.S. EPA smog chamber. We assessed the toxicity of identified NPs and their equimolar mixture in normal bronchial epithelial (BEAS-2B) and alveolar epithelial cancer (A549) lung cell lines. The inhibitory concentration-50 (IC₅₀) values were highest and lowest in BEAS-2B cells treated with 2-nitrophenol (2NP) and 4-nitrophenol (4NP), respectively, at 24 h of exposure. The lactate dehydrogenase (LDH) assay showed that 4NP, the most abundant NP we identified in PM_2.5, was the most cytotoxic NP examined in both cell lines. The annexin-V/fluorescein isothiocyanate (FITC) analysis showed that the populations of late apoptotic/necrotic BEAS-2B and A549 cells exposed to 3NP, 4NP, and NP equimolar mixture increased between 24 and 48 h. Cellular reactive oxygen species (ROS) buildup led to cellular death post exposure to 3NP, 4NP and the NP mixtures, while 2NP induced the lowest ROS buildup. An increased mitochondrial ROS signal following NP exposure occurred only in BEAS-2B cells. The tetramethylrhodamine, methyl ester, perchlorate (TMRM) assay showed that exposed cells exhibited collapse of the mitochondrial membrane potential. TMRM signals decreased significantly only in BEAS-2B cells, and most strongly with 4NP exposures. Our results suggest that acute atmospheric exposures to NPs may be toxic at high concentrations, but not at ambient PM_2.5 concentrations. Further chronic studies with NP and NP-containing PM_2.5 are warranted to assess their contribution to lung pathologies.

Metal-free catalysis for the reaction of nitrogen dioxide dimer with phenol: An unexpected favorable source of nitrate and aerosol precursors in vehicle exhaust

Atmospheric reaction mechanism and dynamics of phenol with nitrogen dioxide dimer were explored by the density functional theory and high-level quantum chemistry combined with statistical kinetic calculations within 220-800 K. The nitric acid and phenyl nitrite, the typical aerosol precursors, are the preponderant products because of the low formation free energy barrier (∼8.7 kcal/mol) and fast rate constants (∼10^-15 cm³ molecule^-1 s^-1 at 298 K). Phenyl nitrate is the minor product and it would be also formed from the transformation of phenyl nitrite in NO₂-rich environment. More importantly, kinetic effects and catalytic mechanism of a series of metal-free catalysts (H₂O, NH₃, CH₃NH₂, CH₃NHCH₃, HCOOH, and CH₃COOH) on the title reaction were investigated at the same level. The results indicate that CH₃NH₂ and CH₃NHCH₃ can not only catalyze the title reaction by lowering the free energy barrier (about 1.4-6.5 kcal/mol) but also facilitate the production of organic ammonium nitrate via acting as a donor-acceptor of hydrogen. Conversely, the other species are non-catalytic upon the title reaction. The stabilization energies and donor-acceptor interactions in alkali-catalyzed product complexes were explored, which can provide new insights to the properties of aerosol precursors. Moreover, the lifetime of phenol determined by nitrogen dioxide dimer in the presence of dimethylamine may compete with that of determined by OH radicals, indicating that nitrogen dioxide dimer is responsible for the elimination of phenol in the polluted atmosphere. This work could help us thoroughly understand the removal of nitrogen oxides and phenol as well as new aerosol precursor aggregation in vehicle exhaust.

Rapid and highly selective electrochemical sensor based on ZnS/Au-decorated f-multi-walled carbon nanotube nanocomposites produced via pulsed laser technique for detection of toxic nitro compounds

Novel ZnS/Au/f-multi-walled carbon nanotube (MWCNT) nanostructures were produced via a pulsed laser-assisted technique followed by a wet chemical process. ZnS nanospheres were synthesized via pulsed laser ablation of a Zn target in DMSO, which was used as a solvent and sulfur source. Notably, no additional sulfur sources, surfactants, or reducing agents were used during the synthesis. The structure and morphology of the prepared materials were characterized by X-ray diffraction, micro-Raman spectroscopy, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The fabricated electrochemical sensor based on ZnS/Au/f-MWCNT nanocomposites exhibited rapid and highly selective detection of a toxic pollutant, namely 4-nitrophenol (4-NP). Linear sweep voltammetry analysis revealed that the optimized ZnS/Au10/f-MWCNT3 nanocomposite displayed a wide linear dynamic response (10-150 μM) with high sensitivity (0.8084μAμM^-1cm^-2) and low limit of detection (30 nM). The excellent 4-NP sensing performance of the modified electrode was attributed to the availability of numerous active sites (electrochemical surface area=0.00369μFcm^-2) and an enhanced electron transfer rate. Interference and stability studies were also conducted. A 100-fold excess of competing ions (Na⁺, K⁺, Mg²⁺, Cl^-, NO₃^-, 4-AP, AA, and 2-NP) did not interfere with the selective detection of 4-NP. The newly fabricated ZnS/Au10/f-MWCNT3 nanocomposite could be an effective sensor for the selective and sensitive detection of toxic organic nitro compounds.

Mn-Fe3O4 nanoparticles anchored on the urushiol functionalized 3D-graphene for the electrochemical detection of 4-nitrophenol

Preparation of highly active and cost-effective electrode materials is of great interest in electrochemical detection. In this study, a simple urushiol-templated solvothermal method combined with calcination was proposed to fabricate N-doped three-dimensional graphene (3D-G) with Mn-doped Fe₃O₄ nanoparticles loaded on the surface (Mn-Fe₃O₄/3D-G). Because of the large active surface area, porous channel and high loading ratio of Mn-Fe₃O₄ nanoparticles, as-prepared Mn-Fe₃O₄/3D-G sensor showed high activity on the determination of 4-nitrophenol (4-NP), which are much improved from the control un-modified samples. The wide linear concentration range (5-100 μM), low detection limit (19 nM) and satisfactory recovery of 4-NP in various water samples (98.38-100.41%) indicated that the Mn-Fe₃O₄/3D-G electrode can be potentially used for real-world applications. This study gives a simple but meaningful strategy for constructing transition metal oxide/graphene composite materials with high electrocatalytic activity.

Monolithic mixed matrix membrane based on polyethersulfone/functionalized MWCNTs nanocomposite as an SPME fiber: Application to extract chlorophenols from human urine and serum samples followed by GC-ECD

A monolithic mixed matrix membrane of functionalized multi-walled carbon nanotubes-polyethersulfone (MWCNT/PES) was prepared in a non-covalent approach and employed as an SPME fiber for extraction of chlorophenols (CPs). The proposed extraction method was followed by GC-ECD to determine the analytes. The influencing factors on the extraction efficiency such as pH, ionic strength, extraction and desorption temperature and time were studied. Under the selected conditions, calibration curves were linear over a wide concentration range from 0.005 to 1000 µgL^-1 (r² > 0.9961) for target analytes. In addition, the limits of detection (LOD) of the method were obtained in the range of 0.3-30 ng L^-1. The relative standard deviation (RSD) for single fiber repeatability (n = 5) is from 1.4 to 4.6%. Fiber-to-fiber repeatability (n = 3) was also evaluated and the RSD is in the range of 1.3-6.3%. Applications of proposed fiber for extraction of CPs from the headspace of urine and serum samples were successfully investigated. The relative recovery in the biological samples spiked with different levels of CPs were in the range of 91.6-102.5%.

Bi2O3 Nanoparticles Decorated Carbon Nanotube: An Effective Nanoelectrode for Enhanced Electrocatalytic 4-Nitrophenol Reduction

4-Nitrophenol (4-NP) is present in most industrial waste water resources as an organic pollutant, and is a highly toxic and environmentally hazardous pollutant. Herein, we report that bismuth oxide (Bi2O3) decorated multi-walled carbon nanotubes (Bi2O3@MWCNTs) are the most prominent electrocatalyst for 4-NP electroreduction in acidic conditions. The electrocatalyst is synthesized by a simple chemical reduction method using ethylene glycol as a capping agent. The synthesized Bi2O3@MWCNTs electrocatalyst has been well-characterized by Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. Bi2O3@MWCNTs have a cubic structure which is confirmed by XRD. TEM imaging reveals Bi2O3 NPs are ~2 nm in size, are grown on MWCNTs and that these nanoparticles are active toward 4-NP electroreduction. The electrochemical studies by cyclic voltammetry measurements show that the Bi2O3@MWCNTs electrocatalyst can sense 4-NP at a very low potential i.e., -0.17 vs. saturated calomel electrode (SCE). Furthermore, electroanalytical parameters like scan rate and concentration dependence were studied with electrochemcial impedance spectroscopy (EIS) and the effect of pH on cathodic current was examined under experimental conditions. The lower limit of detection (LOD) was found to be 0.1 μM for the Bi2O3@MWCNTs nanomaterial and is excellent toward 4-NP. The present study has applications for reducing water pollution and for sorting out related issues.

Nitrated phenols and the phenolic precursors in the atmosphere in urban Jinan, China

Nitrated phenols are a major class of brown carbon in the atmosphere and have adverse effects on human and plants health. They are emitted from combustion sources or produced by oxidation of phenolic precursors. In this study, fine particulates, total suspended particulates, and gas-phase samples were collected in urban Jinan in winter, spring, and summer, and UHPLC-MS analysis was used to determine 8 phenolic compounds and 12 nitrated phenols in these samples. The seasonal average concentrations of total phenolic compounds and total nitrated phenols were in the ranges of 2.6-18.7 ng m^-3 and 13.5-105.4 ng m^-3, respectively. The concentrations of phenolic compounds and nitrated phenols were highest in winter, followed (in decreasing order) by spring, and summer. Phenol and salicylic acid were the most abundant phenolic species in both gaseous and particulate samples. 4-Nitrophenol was the most abundant nitrated phenols in particulate matters, followed by 4-nitrocatechol and 5-nitrosalicylic acid, while 4-nitrophenol and 2,4-dinitrophenol were the dominant species in the gas phase. The distributions of phenolic compounds and nitrated phenols in fine and coarse particles and in gas and particle phases were largely dependent on the aerosol size distribution, the ambient temperature, and the compound volatility. More of them were distributed in fine particles and gas-phase in summer than in spring. It was found that phenol, catechol, methyl-catechols, 4-nitrophenol, and methyl-nitrophenols mainly derived from coal combustion, while biomass burning was the main source of cresols, 2,6-dimethyl-4-nitrophenol, 4-nitrocatechol, and methyl-nitrocatechols. In addition, secondary formation contributed the largest fraction of nitrosalicylic acids and vehicle exhaust was the major source of cresols, 2,6-dimethyl-4-nitrophenol, and 4-methyl-2,6-dinitrophenol. Further correlation analysis revealed positive correlations between nitrated phenols and corresponding phenolic precursors, indicating the important roles that phenolic precursors played in the secondary formation and abundance of nitrated phenols in the atmosphere.

Enhanced sensing of hazardous 4-nitrophenol by a graphene oxide–TiO2 composite: environmental pollutant monitoring applications

The accurate detection of hazardous 4-nitrophenol (4-NP) is deemed essential for the environment and human health.

Ultrasound-assisted synthesis of 3D flower-like zinc oxide decorated fMWCNTs for sensitive detection of toxic environmental pollutant 4-nitrophenol

Sonochemical synthesis of functionalized multi-walled carbon nanotubes (fMWCNTs) embellished 3D flower-like zinc oxide (ZnO) nanocomposite based novel electrochemical sensor for the detection of toxic environmental pollutant 4-nitrophenol (4-NP) is detailed in this paper. We have used laser-assisted synthesis technique in the development of 3D flower-like ZnO nanoparticles (NPs) and ultrasonication method was employed in preparation of ZnO NPs@fMWCNTs nanocomposite using a high-intensity ultrasonic bath DC200H with power of 200 W/cm² and 40 KHz frequency. The nanocomposite was meticulously fabricated on screen printed carbon electrode (SPCE) to carry out various electrochemical analysis. Different characterizations such as Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, UV visible spectroscopy (UV-Vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) of the materials used in this work were taken. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques are used in electrochemical investigations. We have observed well-defined oxidation and reduction peak currents representing electrochemical mechanism of 4-NP at very low potentials for ZnO NPs@fMWCNTs/SPCE. Furthermore, we were able to achieve efficient electrochemical determination of 4-NP using the developed sensor with a high sensitivity of 11.44 μA μM^-1 cm^-2 and very low detection limit (LOD) of 0.013 μM in a broad linear range of 0.06-100 μM. All the significant features of a good sensor including anti-interference, good stability, excellent repeatability, and reproducibility were exhibited by the sensor. Moreover, we have tested practical feasibility of sensor by carrying out real sample analysis on different water samples.

Electrochemical detection of 2-nitrophenol using a heterostructure ZnO/RuO2 nanoparticle modified glassy carbon electrode

A highly selective chemisensor for 2-nitrophenol detection was fabricated using ZnO/RuO₂ nanoparticles (NPs) synthesized by impregnation method.

Environmental persistence, hazard, and mitigation challenges of nitroaromatic compounds

Nitroaromatic compounds (NACs) are extensively used in different industries and are synthesized in large quantity due to their heavy demand worldwide. The broad use of NACs poses a serious pollution threat. The treatment processes used for the removal of NACs are not effective and sustainable, leading to their release into the environment. The nitro group attached to benzene ring makes the compounds recalcitrant due to which they persist in the environment. Being hazardous to human as well as other living organisms, NACs are listed in the USEPA's priority pollutant group. This review provides updated information on the sources of NACs, prevalence in different environmental matrices, and recent developments in methods of their detection, with emphasis on current trends as well as future prospects. The harmful effects of NACs due to exposure through different routes are also highlighted. Further, the technologies reported for the treatment of NACs, including physico-chemical and biological methods, and the challenges faced for their effective implementation are discussed. Thus, the review discusses relevant issues in detail making suitable recommendations, which can be helpful in guiding further research in this subject.

A versatile ratiometric electrochemical sensing platform based on N-Mo2C for detection of m-nitrophenol

M-nitrophenol (m-NP) is a high priority environmental pollutant and poses a series of threats on human health. Accurate and rapid detection of m-NP in practical samples is very important as this is the key prerequisite for its effective monitoring. Eelectrochemical sensor, though long serving as highly sensitive and fast analytical tool, suffers from the bottleneck problems like low specificity, poor reproducibility, susceptibility to internal and external disturbances, etc. Herein, we developed a ratiometric electrochemical sensor (R-ECS) for m-NP detection, in which nitrogen-doped Mo₂C (N-Mo₂C) was deployed as the sensing agent and methylene blue (MB) as the internal reference. Full characterization of N-Mo₂C was carried out in the aspects of morphology, composition, chemical bonds and electrochemical behavior, and the sensing performance of the easy-to-operate R-ECS was evaluated. Complete separation of the oxidation peaks of m-NP and MB was achieved using the MB/N-Mo₂C composite modified electrode and their ratiometric signals were adopted for quantification of m-NP. The linear relation between the electrical signal and the concentration of m-NP is in the range of 1-1500 μM, with the detection limit of 0.256 μM (S/N = 3). The sensor was applied to measure m-NP in real samples from tap water and river. Experimental results demonstrate that it exhibits decent repeatability, reproducibility, stability and selectivity, which proves its great practical potential as an analytical detector.

Simplistic synthesis of ultrafine CoMnO3 nanosheets: An excellent electrocatalyst for highly sensitive detection of toxic 4-nitrophenol in environmental water samples

Design and fabrication of cost effective analytical tools to monitor toxic organic emissions in eco system is of a great necessity. Nitrophenols are a class of widespread toxic organic pollutant lead to serious adverse effects in biosphere on its consumption. This article reports a high sensitive, cost effective, robust electrochemical sensor for 4-nitrophenol (4-NP) in environmental water samples. A novel sheet like CoMnO₃ (CMO Ns) nanocatalyst was synthesized via oxalic acid assisted co-precipitation technique and employed as electrocatalyst for the high sensitive detection of 4-NP. The physiochemical properties of CMO Ns are studied in detail via XRD, FTIR, TEM, TGA, and XPS. TEM results reviled the protocol is an excellent way for synthesis of a uniformly distributed CMO Ns with lathery surface. Evident to the surface and other physiochemical studies the CMO Ns based sensor holds superior electrocatalytic activity towards 4-NP detection with excellent sensitivity (2.458 μA μM^-1 cm^-2) coupled with nanomolar detection (10 nm) limits. Moreover, the constructed sensor holds reliable long-term durability, good reproducibility, and excellent working stability. The practical applicability of the developed sensor was evaluated by determination of 4-NP in samples acquired from water resources with RSD ± 3.3%.

A review of the advanced developments of electrochemical sensors for the detection of toxic and bioactive molecules

The recent developments made regarding the novel, cost-effective, and environmentally friendly nanocatalysts for the electrochemical sensing of biomolecules, pesticides, nitro compounds and heavy metal ions are discussed in this review article.

Decomposition byproducts induced by gamma radiation and their toxicity: the case of 2-nitrophenol

The induced degradation and detoxification of 2-nitrophenol (2-NP) in aqueous media by gamma irradiation were carefully evaluated in this study. Gamma radiation at absorbed doses as low as 20 kGy was able to degrade 2-NP to reach a removal of at least 85% across the investigated range of concentration (50-150 ppm). 2-NP breaks down to aromatic-based compounds with increasing number of byproducts upon increasing the radiation treatment from the absorbed dose of 50% decomposition (D₅₀) to the absorbed dose of 90% decomposition (D₉₀), after which no byproducts could be detected, indicating the formation of undetectable aliphatic hydrocarbons, insoluble, or volatile byproducts. Toxicology studies showed that the degradation of 2-NP under absorbed doses up to D₉₀ resulted in a more toxic byproduct than the parent compound, and a remarkable reduction in the toxicity was observed with the irradiated samples with absorbed doses above D₉₀. Varying the pH of the media to acidic or basic conditions did not significantly alter the degradation behavior of 2-NP. However, a notable improvement of the detoxification was associated with the samples of acidic pH. Adding 0.5% of H₂O₂ to 2-NP solutions had a positive effect by reducing D₉₀ by a factor of nine and diminishing the toxicity by twofolds.

Atmospheric chemistry of bioaerosols: heterogeneous and multiphase reactions with atmospheric oxidants and other trace gases

Once airborne, biologically-derived aerosol particles are prone to reaction with various atmospheric oxidants such as OH, NO₃, and O₃.

Advances in analytical techniques and instrumentation have now established methods for detecting, quantifying, and identifying the chemical and microbial constituents of particulate matter in the atmosphere. For example, recent cryo-TEM studies of sea spray have identified whole bacteria and viruses ejected from ocean seawater into air. A focal point of this perspective is directed towards the reactivity of aerosol particles of biological origin with oxidants (OH, NO₃, and O₃) present in the atmosphere. Complementary information on the reactivity of aerosol particles is obtained from field investigations and laboratory studies. Laboratory studies of different types of biologically-derived particles offer important information related to their impacts on the local and global environment. These studies can also unravel a range of different chemistries and reactivity afforded by the complexity and diversity of the chemical make-up of these particles. Laboratory experiments as the ones reviewed herein can elucidate the chemistry of biological aerosols.