Specific mode of interaction between components of model pulmonary surfactants using computer simulations

The lung surfactant activity probed with molecular dynamics simulations

The surface of pulmonary alveolar subphase is covered with a mixture of lipids and proteins. This lung surfactant plays a crucial role in lung functioning. It shows a complex phase behavior which can be altered by the interaction with third molecules such as drugs or pollutants. For studying multicomponent biological systems, it is of interest to couple experimental approach with computational modelling yielding atomic-scale information. Simple two, three, or four-component model systems showed to be useful for getting more insight in the interaction between lipids, lipids and proteins or lipids and proteins with drugs and impurities. These systems were studied theoretically using molecular dynamic simulations and experimentally by means of the Langmuir technique. A better understanding of the structure and behavior of lung surfactants obtained from this research is relevant for developing new synthetic surfactants for efficient therapies, and may contribute to public health protection.

Modeling Gas-Liquid Interfaces by Dissipative Particle Dynamics: Adsorption and Surface Tension of Cetyl Trimethyl Ammonium Bromide at the Air-Water Interface

Adsorption of surfactants at gas-liquid interfaces that causes reduction in the surface tension is a classical problem in colloid and interface science with multiple practical applications in oil and gas recovery, separations, cosmetics, personal care, and biomedicine. Here, we develop an original coarse-grained model of the liquid-gas interface within the conventional dissipative particle dynamics (DPD) framework with the goal of quantitatively predicting the surface tension in the presence of surfactants. As a practical case-study example, we explore the adsorption of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) on the air-water interface. The gas phase is modeled as a DPD fluid composed of fictitious hard-core "gas" beads with exponentially decaying repulsive potentials to prevent penetration of the liquid phase components. A rigorous parametrization scheme is proposed based on matching the bulk and interfacial properties of water and octane taken as the reference compounds. Quantitative agreement between the simulated and experimental surface tension of CTAB solutions is found for a wide range of bulk surfactant concentrations (∼10^-3 to ∼1 mmol/L) with the reduction of the surface tension from ∼72 mN/m (pure water) to the limiting value of ∼37.5 mN/m at the critical micelle concentration. The gas phase DPD model with the proposed parametrization scheme can be extended and applied to modeling various gas-liquid interfaces with surfactant and lipid monolayers, such as bubble suspensions, foams, froths, etc.

Prednisolone adsorption on lung surfactant models: insights on the formation of nanoaggregates, monolayer collapse and prednisolone spreading

The adsorption of prednisolone on a lung surfactant model was successfully performed using coarse grained molecular dynamics.

Computer simulations of lung surfactant

Lung surfactant lines the gas-exchange interface in the lungs and reduces the surface tension, which is necessary for breathing. Lung surfactant consists mainly of lipids with a small amount of proteins and forms a monolayer at the air-water interface connected to bilayer reservoirs. Lung surfactant function involves transfer of material between the monolayer and bilayers during the breathing cycle. Lipids and proteins are organized laterally in the monolayer; selected species are possibly preferentially transferred to bilayers. The complex 3D structure of lung surfactant and the exact roles of lipid organization and proteins remain important goals for research. We review recent simulation studies on the properties of lipid monolayers, monolayers with phase coexistence, monolayer-bilayer transformations, lipid-protein interactions, and effects of nanoparticles on lung surfactant. This article is part of a Special Issue entitled: Biosimulations edited by Ilpo Vattulainen and Tomasz Róg.

Molecular dynamics of dibenz[a,h]anthracene and its metabolite interacting with lung surfactant phospholipid bilayers

Dibenz[a,h]anthracene and its metabolite may form aggregates, which have implications in the clearance process of the lung surfactant phospholipid bilayers.

Simulations of lipid monolayers

A lipid monolayer lining a boundary between two immiscible phases forms a complex interface with inhomogeneous distribution of forces. Unlike lipid bilayers, monolayers are formed in asymmetric environment and their properties depend strongly on lipid surface density. The monolayer properties are also affected significantly by the representation of the pure interface. Here we give a brief theoretical introduction and describe methods to simulate lipid monolayers starting from force-fields and system setup to reproducing state points on the surface tension (pressure)-area isotherms and transformations between them.

"SP-G", a putative new surfactant protein--tissue localization and 3D structure

Surfactant proteins (SP) are well known from human lung. These proteins assist the formation of a monolayer of surface-active phospholipids at the liquid-air interface of the alveolar lining, play a major role in lowering the surface tension of interfaces, and have functions in innate and adaptive immune defense. During recent years it became obvious that SPs are also part of other tissues and fluids such as tear fluid, gingiva, saliva, the nasolacrimal system, and kidney. Recently, a putative new surfactant protein (SFTA2 or SP-G) was identified, which has no sequence or structural identity to the already know surfactant proteins. In this work, computational chemistry and molecular-biological methods were combined to localize and characterize SP-G. With the help of a protein structure model, specific antibodies were obtained which allowed the detection of SP-G not only on mRNA but also on protein level. The localization of this protein in different human tissues, sequence based prediction tools for posttranslational modifications and molecular dynamic simulations reveal that SP-G has physicochemical properties similar to the already known surfactant proteins B and C. This includes also the possibility of interactions with lipid systems and with that, a potential surface-regulatory feature of SP-G. In conclusion, the results indicate SP-G as a new surfactant protein which represents an until now unknown surfactant protein class.

Structural modelling and dynamics of proteins for insights into drug interactions

Proteins are the workhorses of biomolecules and their function is affected by their structure and their structural rearrangements during ligand entry, ligand binding and protein-protein interactions. Hence, the knowledge of protein structure and, importantly, the dynamic behaviour of the structure are critical for understanding how the protein performs its function. The predictions of the structure and the dynamic behaviour can be performed by combinations of structure modelling and molecular dynamics simulations. The simulations also need to be sensitive to the constraints of the environment in which the protein resides. Standard computational methods now exist in this field to support the experimental effort of solving protein structures. This review presents a comprehensive overview of the basis of the calculations and the well-established computational methods used to generate and understand protein structure and function and the study of their dynamic behaviour with the reference to lung-related targets.

Studying interfacial reactions of cholesterol sulfate in an unsaturated phosphatidylglycerol layer with ozone using field induced droplet ionization mass spectrometry

Field-induced droplet ionization (FIDI) is a recently developed ionization technique that can transfer ions from the surface of microliter droplets to the gas phase intact. The air-liquid interfacial reactions of cholesterol sulfate (CholSO(4)) in a 1-palmitoyl-2-oleoyl-sn-phosphatidylglycerol (POPG) surfactant layer with ozone (O(3)) are investigated using field-induced droplet ionization mass spectrometry (FIDI-MS). Time-resolved studies of interfacial ozonolysis of CholSO(4) reveal that water plays an important role in forming oxygenated products. An epoxide derivative is observed as a major product of CholSO(4) oxidation in the FIDI-MS spectrum after exposure of the droplet to O(3) for 5 s. The abundance of the epoxide product then decreases with continued O(3) exposure as the finite number of water molecules at the air-liquid interface becomes exhausted. Competitive oxidation of CholSO(4) and POPG is observed when they are present together in a lipid surfactant layer at the air-liquid interface. Competitive reactions of CholSO(4) and POPG with O(3) suggest that CholSO(4) is present with POPG as a well-mixed interfacial layer. Compared with CholSO(4) and POPG alone, the overall ozonolysis rates of both CholSO(4) and POPG are reduced in a mixed layer, suggesting the double bonds of both molecules are shielded by additional hydrocarbons from one another. Molecular dynamics simulations of a monolayer comprising POPG and CholSO(4) correlate well with experimental observations and provide a detailed picture of the interactions between CholSO(4), lipids, and water molecules in the interfacial region.

Lung surfactant protein SP-B promotes formation of bilayer reservoirs from monolayer and lipid transfer between the interface and subphase

We investigated the possible role of SP-B proteins in the function of lung surfactant. To this end, lipid monolayers at the air/water interface, bilayers in water, and transformations between them in the presence of SP-B were simulated. The proteins attached bilayers to monolayers, providing close proximity of the reservoirs with the interface. In the attached aggregates, SP-B mediated establishment of the lipid-lined connection similar to the hemifusion stalk. Via this connection, a lipid flow was initiated between the monolayer at the interface and the bilayer in water in a surface-tension-dependent manner. On interface expansion, the flow of lipids to the monolayer restored the surface tension to the equilibrium spreading value. SP-B induced formation of bilayer folds from the monolayer at positive surface tensions below the equilibrium. In the absence of proteins, lipid monolayers were stable at these conditions. Fold nucleation was initiated by SP-B from the liquid-expanded monolayer phase by local bending, and the proteins lined the curved perimeter of the growing fold. No effect on the liquid-condensed phase was observed. Covalently linked dimers resulted in faster kinetics for monolayer folding. The simulation results are in line with existing hypotheses on SP-B activity in lung surfactant and explain its molecular mechanism.

Time resolved studies of interfacial reactions of ozone with pulmonary phospholipid surfactants using field induced droplet ionization mass spectrometry

Field induced droplet ionization mass spectrometry (FIDI-MS) comprises a soft ionization method to sample ions from the surface of microliter droplets. A pulsed electric field stretches neutral droplets until they develop dual Taylor cones, emitting streams of positively and negatively charged submicrometer droplets in opposite directions, with the desired polarity being directed into a mass spectrometer for analysis. This methodology is employed to study the heterogeneous ozonolysis of 1-palmitoyl-2-oleoyl-sn-phosphatidylglycerol (POPG) at the air-liquid interface in negative ion mode using FIDI mass spectrometry. Our results demonstrate unique characteristics of the heterogeneous reactions at the air-liquid interface. We observe the hydroxyhydroperoxide and the secondary ozonide as major products of POPG ozonolysis in the FIDI-MS spectra. These products are metastable and difficult to observe in the bulk phase, using standard electrospray ionization (ESI) for mass spectrometric analysis. We also present studies of the heterogeneous ozonolysis of a mixture of saturated and unsaturated phospholipids at the air-liquid interface. A mixture of the saturated phospholipid 1,2-dipalmitoyl-sn-phosphatidylglycerol (DPPG) and unsaturated POPG is investigated in negative ion mode using FIDI-MS while a mixture of 1,2-dipalmitoyl-sn-phosphatidylcholine (DPPC) and 1-stearoyl-2-oleoyl-sn-phosphatidylcholine (SOPC) surfactant is studied in positive ion mode. In both cases FIDI-MS shows the saturated and unsaturated pulmonary surfactants form a mixed interfacial layer. Only the unsaturated phospholipid reacts with ozone, forming products that are more hydrophilic than the saturated phospholipid. With extensive ozonolysis only the saturated phospholipid remains at the droplet surface. Combining these experimental observations with the results of computational analysis provides an improved understanding of the interfacial structure and chemistry of a surfactant layer system when subject to oxidative stress.

Interfacial reactions of ozone with surfactant protein B in a model lung surfactant system

Oxidative stresses from irritants such as hydrogen peroxide and ozone (O(3)) can cause dysfunction of the pulmonary surfactant (PS) layer in the human lung, resulting in chronic diseases of the respiratory tract. For identification of structural changes of pulmonary surfactant protein B (SP-B) due to the heterogeneous reaction with O(3), field-induced droplet ionization (FIDI) mass spectrometry has been utilized. FIDI is a soft ionization method in which ions are extracted from the surface of microliter-volume droplets. We report structurally specific oxidative changes of SP-B(1-25) (a shortened version of human SP-B) at the air-liquid interface. We also present studies of the interfacial oxidation of SP-B(1-25) in a nonionizable 1-palmitoyl-2-oleoyl-sn-glycerol (POG) surfactant layer as a model PS system, where competitive oxidation of the two components is observed. Our results indicate that the heterogeneous reaction of SP-B(1-25) at the interface is quite different from that in the solution phase. In comparison with the nearly complete homogeneous oxidation of SP-B(1-25), only a subset of the amino acids known to react with ozone are oxidized by direct ozonolysis in the hydrophobic interfacial environment, both with and without the lipid surfactant layer. Combining these experimental observations with the results of molecular dynamics simulations provides an improved understanding of the interfacial structure and chemistry of a model lung surfactant system subjected to oxidative stress.

Critical structural and functional roles for the N-terminal insertion sequence in surfactant protein B analogs

Background

Surfactant protein B (SP-B; 79 residues) belongs to the saposin protein superfamily, and plays functional roles in lung surfactant. The disulfide cross-linked, N- and C-terminal domains of SP-B have been theoretically predicted to fold as charged, amphipathic helices, suggesting their participation in surfactant activities. Earlier structural studies with Mini-B, a disulfide-linked construct based on the N- and C-terminal regions of SP-B (i.e., ∼residues 8–25 and 63–78), confirmed that these neighboring domains are helical; moreover, Mini-B retains critical in vitro and in vivo surfactant functions of the native protein. Here, we perform similar analyses on a Super Mini-B construct that has native SP-B residues (1–7) attached to the N-terminus of Mini-B, to test whether the N-terminal sequence is also involved in surfactant activity.

Methodology/Results

FTIR spectra of Mini-B and Super Mini-B in either lipids or lipid-mimics indicated that these peptides share similar conformations, with primary α-helix and secondary β-sheet and loop-turns. Gel electrophoresis demonstrated that Super Mini-B was dimeric in SDS detergent-polyacrylamide, while Mini-B was monomeric. Surface plasmon resonance (SPR), predictive aggregation algorithms, and molecular dynamics (MD) and docking simulations further suggested a preliminary model for dimeric Super Mini-B, in which monomers self-associate to form a dimer peptide with a “saposin-like” fold. Similar to native SP-B, both Mini-B and Super Mini-B exhibit in vitro activity with spread films showing near-zero minimum surface tension during cycling using captive bubble surfactometry. In vivo, Super Mini-B demonstrates oxygenation and dynamic compliance that are greater than Mini-B and compare favorably to full-length SP-B.

Conclusion

Super Mini-B shows enhanced surfactant activity, probably due to the self-assembly of monomer peptide into dimer Super Mini-B that mimics the functions and putative structure of native SP-B.

Molecular dynamics simulation study of a pulmonary surfactant film interacting with a carbonaceous nanoparticle

This article reports an all-atom molecular dynamics simulation to study a model pulmonary surfactant film interacting with a carbonaceous nanoparticle. The pulmonary surfactant is modeled as a dipalmitoylphosphatidylcholine monolayer with a peptide consisting of the first 25 residues from surfactant protein B. The nanoparticle model with a chemical formula C188H53 was generated using a computational code for combustion conditions. The nanoparticle has a carbon cage structure reminiscent of the buckyballs with open ends. A series of molecular-scale structural and dynamical properties of the surfactant film in the absence and presence of nanoparticle are analyzed, including radial distribution functions, mean-square displacements of lipids and nanoparticle, chain tilt angle, and the surfactant protein B peptide helix tilt angle. The results show that the nanoparticle affects the structure and packing of the lipids and peptide in the film, and it appears that the nanoparticle and peptide repel each other. The ability of the nanoparticle to translocate the surfactant film is one of the most important predictions of this study. The potential of mean force for dragging the particle through the film provides such information. The reported potential of mean force suggests that the nanoparticle can easily penetrate the monolayer but further translocation to the water phase is energetically prohibitive. The implication is that nanoparticles can interact with the lung surfactant, as supported by recent experimental data by Bakshi et al.

Intracellular delivery enhancement of poly(amino acid) drug carriers by oligoarginine conjugation

Poly(2-hydroxytethyl aspartamide) (PHEA) was effectively translocated in both fixed and unfixed HeLa cells, when oligoarginine (Arg(8)) known as one of the cell-penetrating peptides was conjugated via a thioether linkage. The internalization of PHEA-Arg(8) into cells was a temperature-dependent process, and the studies at endocytosis inhibition conditions suggested that an endocytosis was a key mechanism. The fluorescence spectra of PHEA-Arg(8) in liposome solutions showed that PHEA-Arg(8) was collectively adsorbed in the negative liposome membrane due to the high cationic property of a conjugated Arg(8), representing that a surface adsorption was a first step in the internalization of PHEA-Arg(8). The membrane leakage activity of PHEA-Arg(8) was much lower than that of Arg(8) own, meaning that PHEA-Arg(8) does not effectively disrupt the cell membrane integrity. The uptake of polymer conjugates increased with the incubation time and reached saturation after several hours. The increase in the number of peptide conjugated to one polymer chain could increase the collective adsorption of polymer conjugates and enhance the cellular uptake. Thus, it is believed that PHEA-Arg(8) could be internalized by an adsorptive-endocytosis. A model conjugate of PHEA-Arg(8) with methotrexate (PHEA-MTX-Arg(8)) inhibited the cell proliferation about several orders of magnitude more active than PHEA-MTX.

The molecular mechanism of monolayer-bilayer transformations of lung surfactant from molecular dynamics simulations

The aqueous lining of the lung surface exposed to the air is covered by lung surfactant, a film consisting of lipid and protein components. The main function of lung surfactant is to reduce the surface tension of the air-water interface to the low values necessary for breathing. This function requires the exchange of material between the lipid monolayer at the interface and lipid reservoirs under dynamic compression and expansion of the interface during the breathing cycle. We simulated the reversible exchange of material between the monolayer and lipid reservoirs under compression and expansion of the interface. We used a mixture of dipalmitoyl-phosphatidylcholine, palmitoyl-oleoyl-phosphatidylglycerol, cholesterol, and surfactant-associated protein C as a functional analog of mammalian lung surfactant. In our simulations, the monolayer collapses into the water subphase on compression and forms bilayer folds. On monolayer reexpansion, the material is transferred from the folds back to the interface. The simulations indicate that the connectivity of the bilayer aggregates to the monolayer is necessary for the reversibility of the monolayer-bilayer transformation. The simulations also show that bilayer aggregates are unstable in the air subphase and stable in the water subphase.

Structure and conformation of the disulfide bond in dimeric lung surfactant peptides SP-B1–25 and SP-B8–25

Raman spectroscopy was used to determine the conformation of the disulfide linkage between cysteine residues in the homodimeric construct of the N-terminal alpha helical domain of surfactant protein B (dSP-B(1-25)). The conformation of the disulfide bond between cysteine residues in position 8 of the homodimer of dSP-B(1-25) was compared with that of a truncated homodimer (dSP-B(8-25)) of the peptide having a disulfide linkage at the same position in the alpha helix. Temperature-dependent Raman spectra of the S-S stretching region centered at approximately 500 cm(-1) indicated a stable, although highly strained disulfide conformation with a chi(CS-SC) dihedral angle of +/-10 degrees for the dSP-B(1-25) dimer. In contrast, the truncated dimer dSP-B(8-25) exhibited a series of disulfide conformations with the chi(CS-SC) dihedral angle taking on values of either +/-30 degrees or 85+/-20 degrees . For conformations with chi(CS-SC) close to the +/-90 degrees value, the Raman spectra of the 8-25 truncated dimers exhibited chi(SS-CC) dihedral angles of 90/180 degrees and 20-30 degrees . In the presence of a lipid mixture, both constructs showed a nu(S-S) band at approximately 488 cm(-1), corresponding to a chi(CS-SC) dihedral angle of +/-10 degrees . Polarized infrared spectroscopy was also used to determine the orientation of the helix and beta-sheet portion of both synthetic peptides. These calculations indicated that the helix was oriented primarily in the plane of the surface, at an angle of approximately 60-70 degrees to the surface normal, while the beta structure had approximately 40 degrees tilt. This orientation direction did not change in the presence of a lipid mixture or with temperature. These observations suggest that: (i) the conformational flexibility of the disulfide linkage is dependent on the amino acid residues that flank the cysteine disulfide bond, and (ii) in both constructs, the presence of a lipid matrix locks the disulfide bond into a preferred conformation.

Mammalian antimicrobial proteins and peptides: overview on the RNase A superfamily members involved in innate host defence

The review starts with a general outlook of the main mechanisms of action of antimicrobial proteins and peptides, with the final aim of understanding the biological function of antimicrobial RNases, and identifying the key events that account for their selective properties. Although most antibacterial proteins and peptides do display a wide-range spectrum of action, with a cytotoxic activity against bacteria, fungi, eukaryotic parasites and viruses, we have only focused on their bactericidal activity. We start with a detailed description of the main distinctive structural features of the bacteria target and on the polypeptides, which act as selective host defence weapons.Following, we include an overview of all the current available information on the mammalian RNases which display an antimicrobial activity. There is a wealth of information on the structural, catalytic mechanism and evolutionary relationships of the RNase A superfamily. The bovine pancreatic RNase A (RNase A), the reference member of the mammalian RNase family, has been the main research object of several Nobel laureates in the 60s, 70s and 80s. A potential antimicrobial function was only recently suggested for several members of this family. In fact, the recent evolutionary studies indicate that this protein family may have started off with a host defence function. Antimicrobial RNases constitute an interesting example of proteins involved in the mammalian innate immune defence system. Besides, there is wealth of available information on the mechanism of action of short antimicrobial peptides, but little is known on larger polypeptides, that is, on proteins. Therefore, the identification of the mechanisms of action of antimicrobial RNases would contribute to the understanding of the proteins involved in the innate immunity.

The Cell-Penetrating Peptide TAT(48-60) Induces a Non-Lamellar Phase in DMPC Membranes

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.

Equation of state for a coarse-grained DPPC monolayer at the air/water interface

Pulmonary surfactant, a complex mixture of phospholipids and proteins, secreted by the type II epithelial cells in the lungs, is crucial to reducing the effort required for breathing. A lack of adequate amounts of pulmonary surfactant in underdeveloped lungs of premature infants results in infant respiratory distress syndrome (RDS). Surfactant replacement therapy (SRT) is the approved method of mitigating the effects of RDS. The development of new SRT regimens requires a fundamental understanding of the links between surfactant biochemistry and functionality. We use a coarse-grained (CG) model to predict the surface pressure-surface concentration relationship (equation of state) for pure DPPC, which is a major component of endogenous and synthetic pulmonary surfactant mixtures. We show that the model can be efficiently used to predict the equation of state in excellent agreement with experimental results. We also study the structure of the monolayer as a function of the surface tension of the system. We show that a decrease in the applied surface tension results in an increase in order in the head group region and a decrease in order in the tail region of DPPC. This technique may be useful in the prediction of equations of state for surfactant replacements.

Effects of Including an N-Terminal Insertion Region and Arginine-Mimetic Side Chains in Helical Peptoid Analogues of Lung Surfactant Protein B

Surfactant protein B (SP-B) is one of two helical, amphipathic proteins critical for the biophysical functioning of lung surfactant (LS) and hence is an important therapeutic protein. This small, complex 79mer has three internal disulfide bonds and homodimerizes via another disulfide bridge. A helical, amphipathic 25mer from the amino terminus (SP-B(1-25)) exhibits surface-active properties similar to those of full-length, synthetic SP-B. In previous work, we created helical, non-natural mimics of SP-B(1-25) based on sequence-specific peptoid 17mers and demonstrated their biomimetic surface activity. Like SP-B(1-25), the peptoids were designed to adopt helical structures with cationic and nonpolar faces. Here, we compare the surface activities of six different helical peptoid analogues of SP-B(1-25) to investigate the importance of mimicking its N-terminal insertion domain as well as its two arginine residues, both thought to be important for the peptide's proper function. Although the peptoid analogues of SP-B(1-25) studied here share many similar features and all functionally mimic SP-B(1-25) to some degree, it is notable that small differences in their sequences and side chain chemistries lead to substantial differences in their observed interactions with a lipid film. A peptoid comprising a hydrophobic, helical insertion region with aromatic side chains shows more biomimetic surface activity than simpler peptoids, and even better activity, by comparison to natural LS, than SP-B(1-25). However, the substitution of lysine-like side chains for arginine-like side chains in the peptoid has little effect on biomimetic surface activity, indicating that interactions of the guanidino groups with lipids may not be critical for the function of these SP-B mimics.

DPPC Langmuir monolayer at the air-water interface: probing the tail and head groups by vibrational sum frequency generation spectroscopy

Dipalmitoylphosphatidylcholine (DPPC) is the predominant lipid component in lung surfactant. In this study, the Langmuir monolayer of deuterated dipalmitoylphosphatidylcholine (DPPC-d62) in the liquid-expanded (LE) phase and the liquid-condensed (LC) phase has been investigated at the air-water interface with broad bandwidth sum frequency generation (BBSFG) spectroscopy combined with a Langmuir film balance. Four moieties of the DPPC molecule are probed by BBSFG: the terminal methyl (CD3) groups of the tails, the methylene (CD2) groups of the tails, the choline methyls (CH3) in the headgroup, and the phosphate in the headgroup. BBSFG spectra of the four DPPC moieties provide information about chain conformation, chain orientation, headgroup orientation, and headgroup hydration. These results provide a comprehensive picture of the DPPC phase behavior at the air-water interface. In the LE phase, the DPPC hydrocarbon chains are conformationally disordered with a significant number of gauche configurations. In the LC phase, the hydrocarbon chains are in an all-trans conformation and are tilted from the surface normal by 25 degrees. In addition, the orientations of the tail terminal methyl groups are found to remain nearly unchanged with the variation of surface area. Qualitative analysis of the BBSFG spectra of the choline methyl groups suggests that these methyl groups are tilted but lie somewhat parallel to the surface plane in both the LE and LC phases. The dehydration of the phosphate headgroup due to the LE-LC phase transition is observed through the frequency blue shift of the phosphate symmetric stretch in the fingerprint region. In addition, implications for lung surfactant function from this work are discussed.

Role of lysine residues in membrane anchoring of saposin C

Molecular dynamics (MD) simulations of the N-terminal region of saposin C, containing amino acid residues 4-20 (saposin C4-20), were performed over 2.5 ns in 1,2-dioleoyl-sn-glycero-3-phosphoserine (DOPS) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) monolayers. The simulations revealed several strong specific interactions of lysine 13 (Lys13) and lysine 17 (Lys17) in saposin C4-20 with the anionic phospholipids, which are required for membrane anchoring of the peptide. Membrane anchoring of saposin C4-20 facilitates saposin C-induced liposomal membrane fusion. Substitutions of Lys13 or Lys17 with alanine or glutamic acid led to a substantial loss of saposin C's fusogenicity. However, arginine replacement of Lys13 or Lys17 caused a partial loss of saposin C's fusogenic activity. The membrane anchoring of saposin C was altered in the presence of 0.4 M sodium chloride. Differential salt effects on Lys-mutant saposin Cs were observed using Trp fluorescence analysis. Low salt concentration had a more significant impact on Lys-mutant saposin C with a negatively charged amino acid residue replacement than those mutants with a positively charged or neutral residue replacement. These results indicate that positively charged amino acids at positions 13 and 17 are required for the fusogenic function of saposin C. In addition, the side-chain structure of lysine is crucial to the precise membrane anchoring which is necessary for the total fusion activity of saposin C. The MD simulations and vesicle size measurements of lysine-mutant saposins confirm the importance of the two lysine residues in saposin C4-20 for saposin C-induced fusion of negatively charged phospholipid membranes.

Molecular dynamics simulations of the anchoring and tilting of the lung-surfactant peptide SP-B1-25 in palmitic acid monolayers

We have performed molecular dynamics simulations of multiple copies of the lung-surfactant peptide SP-B1-25 in a palmitic acid (PA) monolayer. SP-B1-25 is a shorter version of lung-surfactant protein B, an important component of lung surfactant. Up to 30 ns simulations of 20 wt % SP-B1-25 in the PA monolayers were performed with different surface areas of PA, extents of PA ionization, and various initial configurations of the peptides. Starting with initial peptide orientation perpendicular to the monolayer, the predicted final tilt angles average 54 degrees approximately 62 degrees with respect to the monolayer normal, similar to those measured experimentally by Lee et al. (Biophysical Journal. 2001. Synchrotron x-ray study of lung surfactant-specific protein SP-B in lipid monolayers. 81:572-585). In their final conformations, hydrogen-bond analysis and amino acid mutation studies show that the peptides are anchored by hydrogen bond interactions between the cationic residues Arg-12 and Arg-17 and the hydrogen bond acceptors of the ionized PA headgroup, and the tilt angle is affected by the interactions of Tyr-7 and Gln-19 with the PA headgroup. Our work indicates that the factors controlling orientation of small peptides in lipid layers can now be uncovered through molecular dynamics simulations.

Molecular dynamics study of the lung surfactant peptide SP-B1-25 with DPPC monolayers: insights into interactions and peptide position and orientation

We have performed molecular dynamics simulations of the interactions of the peptide SP-B(1-25), which is a truncated version of the full pulmonary surfactant protein SP-B, with dipalmitoylphosphatidylcholine monolayers, which are the major lipid components of lung surfactant. Simulations of durations of 10-20 ns show that persistent hydrogen bonds form between the donor atoms of the protein and the acceptors of the lipid headgroup and that these bonds determine the position, orientation, and secondary structure of the peptide in the membrane environment. From an ensemble of initial conditions, the most probable equilibrium orientation of the alpha-helix of the peptide is predicted to be parallel to the interface, matching recent experimental results on model lipid mixtures. Simulations of a few mutated analogs of SP-B(1-25) also suggest that the charged amino acids are important in determining the position of the peptide in the interface. The first eight amino acids of the peptide, also known as the insertion sequence, are found to be essential in reducing the fluctuations and anchoring the peptide in the lipid/water interface.

Self-aggregates of oligoarginine-conjugated poly(amino acid) derivatives as a carrier for intracellular drug delivery

N(omega)-2,2,4,6,7-Pentamethyldihydrobenzofuran-5-sulfonyl (N(omega)-Pbf)-protected oligoarginine was directly conjugated to poly(amino acid) derivatives modified with a long alkyl chain. The final concentration of conjugated peptides was easily controlled by the feed ratio of oligoarginine to polymer backbone and a final soluble polymeric system was obtained by the deprotection of N(omega)-Pbf groups. The polymeric conjugates formed stable self-aggregates of size range of 8-40 nm in aqueous solution and effectively internalized into HeLa cells by adsorptive endocytosis.

Structure and properties of phospholipid-peptide monolayers containing monomeric SP-B(1-25) II. Peptide conformation by infrared spectroscopy

The conformation and orientation of synthetic monomeric human sequence SP-B(1-25) (mSP-B(1-25)) was studied in films with phospholipids at the air-water (A/W) interface by polarization modulation infrared reflectance absorption spectroscopy (PM-IRRAS). Modified two-dimensional infrared (2D IR) correlation analysis was applied to PM-IRRAS spectra to define changes in the secondary structure and rates of reorientation of mSP-B(1-25) in the monolayer during compression. PM-IRRAS spectra and 2D IR correlation analysis showed that, in pure films, mSP-B(1-25) had a major alpha-helical conformation plus regions of beta-sheet structure. These alpha-helical regions reoriented later during film compression than beta structural regions, and became oriented normal to the A/W interface as surface pressure increased. In mixed films with 4:1 mol:mol acyl chain perdeuterated 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DPPC-d(62):DOPG), the IR spectra of mSP-B(1-25) showed that a significant, concentration-dependent conformational change occurred when mSP-B(1-25) was incorporated into a DPPC-d(62):DOPG monolayer. At an mSP-B(1-25) concentration of 10 wt.%, the peptide assumed a predominantly beta-sheet conformation with no contribution from alpha-helical structures. At lower, more physiological peptide concentrations, 2D IR correlation analysis showed that the propensity of mSP-B(1-25) to form alpha-helical structures was increased. In phospholipid films containing 5 wt.% mSP-B(1-25), a substantial alpha-helical peptide structural component was observed, but regions of alpha and beta structure reoriented together rather than independently during compression. In films containing 1 wt.% mSP-B(1-25), peptide conformation was predominantly alpha-helical and the helical regions reoriented later during compression than the remaining beta structural components. The increased alpha-helical structure of mSP-B(1-25) demonstrated here by PM-IRRAS and 2D IR correlation analysis in monolayers of 4:1 DPPC:DOPG containing 1 wt.% (and, to a lesser extent, 5 wt.%) peptide may be relevant for the formation of the intermediate order 'dendritic' surface phase observed in similar surface films by epi-fluorescence.

Structure and properties of phospholipid–peptide monolayers containing monomeric SP-B1–25

Epifluorescence microscopy was used to study the structure and phase behavior of phospholipid films containing a human-sequence monomeric SP-B(1-25) synthetic peptide (mSP-B(1-25)). Measurements were done directly at the air-water (A/W) interface on films in a Langmuir-Whilhelmy balance coupled to a fluorescence microscope and real-time detection system to yield an approximate optical resolution of 1 mum. Fluorescence was achieved by laser excitation of 2-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-dodecanoyl)-1-hexadecanoyl-sn-glycero-3-PC (BODIPY-PC, concentration </=1 mol%). The presence of mSP-B(1-25) in films of 4:1 (mol/mol) 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DOPG) had a substantial effect on lipid morphology and phase behavior that depended on both surface pressure and peptide concentration (10, 5, and 1 wt.%). The mSP-B(1-25) peptide tended to fluidize phospholipid monolayers based on expanded molecular areas and reduced collapse pressures. In addition, epifluorescence measurements revealed the formation of solid-phase domains apparent as three-armed counterclockwise spirals separated from regions of fluid liquid-expanded phase domains in compressed phospholipid-peptide films. The appearance of these separated solid-phase domains resembled pure L-DPPC rather than the ensemble-type solid domains found in films of DPPC/DOPG alone and were most apparent when 10 wt.% mSP-B(1-25) was present. In contrast, films containing lower, more physiological mSP-B(1-25) contents of 5 and 1 wt.% exhibited a prominent intermediate 'dendritic' phase that increased in extent as surface pressure was raised. This phase was characterized by branching structures that formed a lattice-like mesh network with fluorescence intensities between a dye-depleted solid domain and a dye-enriched liquid phase. These results indicate that mSP-B(1-25) at near-physiological levels produces morphological changes in phospholipid monolayers analogous to those observed for native SP-B(1-79).

Membrane localization and flexibility of a lipidated ras peptide studied by molecular dynamics simulations

Lipid-modified membrane-binding proteins are essential in signal transduction events of the cell, a typical example being the GTPase ras. Recently, membrane binding of a doubly lipid-modified heptapeptide from the C-terminus of the human N-ras protein was studied by spectroscopic techniques. It was found that membrane binding is mainly due to lipid chain insertion, but it is also favored by interactions between apolar side chains and the hydrophobic region of the membrane. Here, 10 explicit solvent molecular dynamics simulations for a total time of about 150 ns are used to investigate the atomic details of the peptide-membrane association. The 16:0 peptide lipid chains are more mobile than the 14:0 phospholipid chains, which is in agreement with (2)H NMR experiments. Peptide-lipid and peptide-solvent interactions, backbone and side-chain distributions, as well as the effects of lipidated peptide insertion onto the structure, and dynamics of a 1,2-dimyristoylglycero-3-phosphocholine bilayer are described. The simulation results validate the structural model proposed by the analysis of spectroscopic data and highlight the main aspects of the insertion mechanism. The peptide in the membrane is rather rigid over the simulation time scale of about 10 ns, but different partially extended conformations devoid of backbone hydrogen bonds are observed in different trajectories.

Simulation studies of pore and domain formation in a phospholipid monolayer

Despite extensive study the phase behavior of phospholipid monolayers at an air-water interface is still not fully understood. In particular recent vibrational sum-frequency generation (VSFG) spectra of DPPC monolayers as a function of area density show a sharp transition in the order of the lipid chains at 1.10 nm2/molecule. This is in a region where the lateral pressure as a function of area is effectively constant. We have investigated the nature of this transition by studying the phase behavior of DPPC monolayers as a function of area density using molecular-dynamics simulations. The changes in order within the monolayer as a function of area density correlate well with the experimental signal. At 0.58 nm2/molecule we observe the onset of lateral separation of highly ordered and disordered lipids, indicating the coexistence of a gel-like liquid condensed and a fluidlike liquid expanded phase. At 0.97 nm2/molecule the monolayer ruptures, marking the onset of the liquid-gas (G) coexistence region. This is much earlier than suggested by fluorescence microscopy results and implies that at the point of rupture, the initial pores have an equilibrium size smaller than approximately 500 nm in diameter. The rupture of the monolayer leads to a sharp increase in the overall lipid order that explains the sharp transition observed in the VSFG measurements. VSFG measurements thus may represent a sensitive means to determine the onset of the liquid-gas (G) coexistence region for such systems.

Penetratin-membrane association: W48/R52/W56 shield the peptide from the aqueous phase

Using molecular dynamics simulations, we studied the mode of association of the cell-penetrating peptide penetratin with both a neutral and a charged bilayer. The results show that the initial peptide-lipid association is a fast process driven by electrostatic interactions. The homogeneous distribution of positively charged residues along the axis of the helical peptide, and especially residues K46, R53, and K57, contribute to the association of the peptide with lipids. The bilayer enhances the stability of the penetratin helix. Oriented parallel to the lipid-water interface, the subsequent insertion of the peptide through the bilayer headgroups is significantly slower. The presence of negatively charged lipids considerably enhances peptide binding. Lateral side-chain motion creates an opening for the helix into the hydrophobic core of the membrane. The peptide aromatic residues form a pi-stacking cluster through W48/R52/W56 and F49/R53, protecting the peptide from the water phase. Interaction with the penetratin peptide has only limited effect on the overall membrane structure, as it affects mainly the conformation of the lipids which interact directly with the peptide. Charge matching locally increases the concentration of negatively charged lipids, lateral lipid diffusion locally decreases. Lipid disorder increases, through decreased order parameters of the lipids interacting with the penetratin side chains. Penetratin molecules at the membrane surface do not seem to aggregate.

Amphipathic peptides and drug delivery

The discovery of cell-penetrating peptides as gene delivery systems and the interest in the mechanism by which these vectors cross the cell membrane have generated a large number of studies. Among the parameters involved in the translocation process, controversy has arisen about the role of the amphipathicity of the carriers in the interaction and reorganization of the cell membrane. In this review we have summarized the vectors with primary or secondary amphipathicity related to secondary structure. Some of the insights into the relationship between the aggregation state of the peptide at the concentrations used for internalization studies and its interaction with the cell membrane result from our contribution to the field with a new family of amphipathic proline-rich peptides.

Electrostatic force microscopy analysis of lipid miscibility in two-component monolayers

Electrostatic force microscopy (EFM) was used to assess lipid miscibility and phase behavior in two-component Langmuir-Blodgett (LB) monolayers composed of cationic dioctadecyldimethylammonium bromide (DOMA) and nonionic methyl stearate (SME) lipids. The surface potential measurements were calibrated by applying known bias voltages to the sample during several line scans, thus creating surface potential "scale bars" on the images from which it was determined that circular domains were 50 mV more positive than the surrounding phase. As the spatially averaged surface potential of DOMA was over 400 mV more positive than that of SME, this 50-mV surface potential difference is too low to correspond to lipid phase separation (immiscibility) in the two-component film. Rather, the surface potential contrast was attributed to an increased packing density and a more orthogonal orientation of lipids in the domains resulting in a greater contribution of dipoles to the measured (normal) surface potential. Monolayers prepared by sequentially spreading the two lipids resulted in irregular domains that were 50-450 mV more positive than the surrounding phase, representing varying degrees of lipid mixing, restricted by two-dimensional diffusion at the interface. Fluorescent images of monolayers stained with negatively charged dye supported the EFM miscibility prediction and assignment of surface potential. These results demonstrate a new approach using EFM to quantitatively measure surface potential in order to assess the lateral distribution of components in thin films as well as predict adsorption patterns to heterogeneous interfaces.

Conformational mapping of the N-terminal peptide of HIV-1 gp41 in lipid detergent and aqueous environments using 13C-enhanced Fourier transform infrared spectroscopy

The N-terminal domain of HIV-1 glycoprotein 41,000 (gp41) participates in viral fusion processes. Here, we use physical and computational methodologies to examine the secondary structure of a peptide based on the N terminus (FP; residues 1-23) in aqueous and detergent environments. (12)C-Fourier transform infrared (FTIR) spectroscopy indicated greater alpha-helix for FP in lipid-detergent sodium dodecyl sulfate (SDS) and aqueous phosphate-buffered saline (PBS) than in only PBS. (12)C-FTIR spectra also showed disordered FP conformations in these two environments, along with substantial beta-structure for FP alone in PBS. In experiments that map conformations to specific residues, isotope-enhanced FTIR spectroscopy was performed using FP peptides labeled with (13)C-carbonyl. (13)C-FTIR results on FP in SDS at low peptide loading indicated alpha-helix (residues 5 to 16) and disordered conformations (residues 1-4). Because earlier (13)C-FTIR analysis of FP in lipid bilayers demonstrated alpha-helix for residues 1-16 at low peptide loading, the FP structure in SDS micelles only approximates that found for FP with membranes. Molecular dynamics simulations of FP in an explicit SDS micelle indicate that the fraying of the first three to four residues may be due to the FP helix moving to one end of the micelle. In PBS alone, however, electron microscopy of FP showed large fibrils, while (13)C-FTIR spectra demonstrated antiparallel beta-sheet for FP (residues 1-12), analogous to that reported for amyloid peptides. Because FP and amyloid peptides each exhibit plaque formation, alpha-helix to beta-sheet interconversion, and membrane fusion activity, amyloid and N-terminal gp41 peptides may belong to the same superfamily of proteins.

Membrane binding and translocation of cell-penetrating peptides

Cell-penetrating peptides (CPPs) have been extensively studied during the past decade, because of their ability to promote the cellular uptake of various cargo molecules, e.g., oligonucleotides and proteins. In a recent study of the uptake of several analogues of penetratin, Tat(48-60) and oligoarginine in live (unfixed) cells [Thorén et al. (2003) Biochem. Biophys. Res. Commun. 307, 100-107], it was found that both endocytotic and nonendocytotic uptake pathways are involved in the internalization of these CPPs. In the present study, the membrane interactions of some of these novel peptides, all containing a tryptophan residue to facilitate spectroscopic studies, are investigated. The peptides exhibit a strong affinity for large unilamellar vesicles (LUVs) containing zwitterionic and anionic lipids, with binding constants decreasing in the order penetratin > R(7)W > TatP59W > TatLysP59W. Quenching studies using the aqueous quencher acrylamide and brominated lipids indicate that the tryptophan residues of the peptides are buried to a similar extent into the membrane, with an average insertion depth of approximately 10-11 A from the bilayer center. The membrane topology of the peptides was investigated using an assay based on resonance energy transfer between tryptophan and a fluorescently labeled lysophospholipid, lysoMC, distributed asymmetrically in the membranes of LUVs. By determination of the energy transfer efficiency when peptide was added to vesicles with lysoMC present exclusively in the inner leaflet, it was shown that none of the peptides investigated is able to translocate across the lipid membranes of LUVs. By contrast, confocal laser scanning microscopy studies on carboxyfluorescein-labeled peptides showed that all of the peptides rapidly traverse the membranes of giant unilamellar vesicles (GUVs). The choice of model system is thus crucial for the conclusions about the ability of CPPs to translocate across lipid membranes. Under the conditions used in the present study, peptide-lipid interactions alone cannot explain the different cellular uptake characteristics exhibited by these peptides.

Molecular engineering of peptides

Deeper understanding of the role of short peptides in lipid layers has revealed potential applications for rationally designed synthetic replacements. A recent report illustrates the successful design of a peptoid mimic of SP-C, a protein linked to respiratory distress syndrome.

Uptake of analogs of penetratin, Tat(48-60) and oligoarginine in live cells

Cell-penetrating peptides are regarded as promising vectors for intracellular delivery of large, hydrophilic molecules, but their mechanism of uptake is poorly understood. Since it has now been demonstrated that the use of cell fixation leads to artifacts in microscopy studies on the cellular uptake of such peptides, much of what has been considered as established facts must be reinvestigated using live (unfixed) cells. In this work, the uptake of analogs of penetratin, Tat(48-60), and heptaarginine in two different cell lines was studied by confocal laser scanning microscopy. For penetratin, an apparently endocytotic uptake was observed, in disagreement with previous studies on fixed cells found in the literature. Substitution of the two tryptophan residues, earlier reported to be essential for cellular uptake, did not alter the uptake characteristics. A heptaarginine peptide, with a tryptophan residue added in the C-terminus, was found to be internalized by cells via an energy-independent, non-endocytotic pathway. Finally, a crucial role for arginine residues in penetratin and Tat(48-60) was demonstrated.

Testing for fetal lung maturation: a biochemical "window" to the developing fetus

Fetal lung maturity testing represents a major milestone in perinatology. This article critically evaluates specific controversies regarding the methodologies used to measure pulmonary surfactant in AF and how well each of these techniques performs both in principle and application. The clinical utility of fetal lung maturity testing as it applies to particularly difficult complications of pregnancy is discussed. These technical and clinical issues are framed by the scientific and empiric evidence that is used as the rationale for such testing and its implementation in the effective management of preterm delivery.

Topographical organization of the N-terminal segment of lung pulmonary surfactant protein B (SP-B(1-25)) in phospholipid bilayers

The location and depth of each residue of lung pulmonary surfactant protein B (SP-B(1-25)) in a phospholipid bilayer (PB) was determined by fluorescence quenching using synthesized single-residue-substituted peptides that were reconstituted into 1,2-dipalmitoyl phosphatidylcholine (DPPC)-enriched liposomes. The single-residue substitutions in peptides were either aspartate or tryptophan. The aspartate was subsequently labeled with the N-cyclohexyl-N'-(4-(dimethylamino)naphthyl)carbodiimide (NCD-4) fluorophore, whereas tryptophan is autofluorescent. Spin-labeled compounds, 5-doxylstearic acid (5-DSA), 7-doxylstearic acid (7-DSA), 12-doxylstearic acid (12-DSA), 4-(N,N-dimethyl-N-hexadecyl)ammonium-2,2,6,6-tetramethylpiperidine-1-oxyl iodide (CAT-16), and 4-trimethylammonium-2,2,6,6-tetramethylpiperidine-1-oxy iodide (CAT-1), were used in the quenching experiments. The effective quenching order is determined by the accessibility of the quencher to a fluorescent group on the peptide. The order of quenching efficiency provides information about the relative locations of individual residues in the PB. Our data indicate that residues Phe1-Pro6 are located at the surface of PB, residues Tyr7-Trp9 are embedded in PB, and residues Leu10-Ile22 are involved in an amphipathic alpha-helix with its axis parallel to the surface of PB; residues Pro23-Gly25 reside at the surface. The effects of intermolecular disulfide bond formation in the SP-B(1-25) dimer were also investigated. The experiments suggest that the SP-B helix A has to rotate at an angle to form a disulfide bond with the neighboring cysteine, which makes the hydrophobic sides of the amphipathic helices face each other, thus forming a hydrophobic domain. The detailed topographical mapping of SP-B(1-25) and its dimer in PB provides new insights into the conformational organization of the lung pulmonary surfactant proteins in the environment that mimics the native state. The environment-specific conformational flexibility of the hydrophobic domain created by SP-B folding may explain the key functional properties of SP-B including their impact on phospholipid transport between the lipid phases and in modulating the cell inflammatory response during respiratory distress syndrome.