Application of the H-point standard addition method to the speciation of Fe(II) and Fe(III) with chromogenic mixed reagents

Novel spectroscopic methods for determination of Cromolyn sodium and Oxymetazoline hydrochloride in binary mixture

New accurate, sensitive and selective spectrophotometric and spectrofluorimetric methods were developed and subsequently validated for determination of Cromolyn sodium (CS) and Oxymetazoline HCl (OXY) in binary mixture. These methods include 'H-point standard addition method (HPSAM) and area under the curve (AUC)' spectrophotometric method and first derivative synchronous fluorescence spectroscopic (FDSFS) method. For spectrophotometric methods, absorbances were recorded at 241.5nm and 274.9nm for HPSAM and the wavelength was selected in ranges 232.0-254.0nm and 216.0-229.0nm for AUC method, where the concentration was obtained by applying Cramer's rule. For FDSFS method, the first-derivative synchronous fluorescence signal was measured at 290.0nm, using Δλ=145.0nm. The suggested methods were validated according to International Conference of Harmonization (ICH) guidelines and the results revealed that they were precise and reproducible. All the obtained results were statistically compared with those of the reported method and there was no significant difference.

H-point standard additions method for simultaneous determination of sulfamethoxazole and trimethoprim in pharmaceutical formulations and biological fluids with simultaneous addition of two analytes

The applicability of H-point standard additions method (HPSAM) to the resolving of overlapping spectra corresponding to the sulfamethoxazole and trimethoprim is verified by UV-vis spectrophotometry. The results show that the H-point standard additions method with simultaneous addition of both analytes is suitable for the simultaneous determination of sulfamethoxazole and trimethoprim in aqueous media. The results of applying the H-point standard additions method showed that the two drugs could be determined simultaneously with the concentration ratios of sulfamethoxazole to trimethoprim varying from 1:18 to 16:1 in the mixed samples. Also, the limits of detections were 0.58 and 0.37 μmol L(-1) for sulfamethoxazole and trimethoprim, respectively. In addition the means of the calculated RSD (%) were 1.63 and 2.01 for SMX and TMP, respectively in synthetic mixtures. The proposed method has been successfully applied to the simultaneous determination of sulfamethoxazole and trimethoprim in some synthetic, pharmaceutical formulation and biological fluid samples.

Kinetic spectrophotometric determination of Fe(II) in the presence of Fe(III) by H-point standard addition method in mixed micellar medium

The H-point standard addition method was applied to kinetic data for simultaneous determination of Fe(II) and Fe(III) or selective determination of Fe(II) in the presence of Fe(III). The method is based on the difference in the rate of complex formation between iron in two different oxidation states and methylthymol blue (MTB) at pH 3.5 in mixed cetyltrimethylammonium bromide (CTAB) and Triton X-100 micellar medium. Fe(II) can be determined in the range 0.25-2.5 microg ml(-1) with satisfactory accuracy and precision in the presence of excess Fe(III) and other metal ions that rapidly form complexes with MTB under working condition. The proposed method was successfully applied to the simultaneous determination of Fe(II) and Fe(III) or selective determination of Fe(II) in the presence of Fe(III) in spiked real environmental and synthetic samples with complex composition.

Simultaneous kinetic determination of levodopa and carbidopa by H-point standard addition method

The kinetic H-point standard addition method (HPSAM) was applied to the simultaneous determination of levodopa and carbidopa. The method was based on the difference in the rate of oxidation of these compounds with Cu(II)-neocuproine system and formation of Cu(I)-neocuproine complex at pH 5.5. The absorbance of the Cu(I)-neocuproine complex was monitored at 453 nm. Experimental conditions such as pH, reagent concentrations, ionic strength and temperature were optimized. Simultaneous determination of levodopa and carbidopa was performed in the range of 0.8-4 and 0.2-1.5 microg ml(-1), respectively. The proposed method was applied to the simultaneous determination of levodopa and carbidopa in pharmaceutical samples, and satisfactory results were obtained.

Simultaneous Spectrophotometric Determination of Levodopa and Carbidopa in Pharmaceutical Formulations and Water Samples by Using Mean Centering of Ratio Spectra and H-Point Standard Addition Methods

Two spectrophotometric methods are described for the simultaneous determination of binary mixtures of carbidopa and levodopa in pharmaceutical formulations, without prior separation steps, using the mean centering of ratio spectra and H-point standard addition methods (HPSAM). The methods are based on the difference in the absorption spectra for the products of the reaction of carbidopa and levodopa with 4-aminobenzoic acid in the presence of periodate ion at pH 4.0. The methods allow rapid and accurate determination of carbidopa and levodopa. The results showed that the methods were capable to simultaneous determination of 0.30-10.00 microg ml(-1) and 0.50-10.00 microg ml(-1) each of carbidopa and levodopa. The proposed methods were successfully applied to the simultaneous determination of carbidopa and levodopa in pharmaceutical samples.

H-point standard addition method--first derivative spectrophotometry for simultaneous determination of palladium and cobalt

H-point standard addition method (HPSAM) has been applied for simultaneous determination of palladium and cobalt in trace levels, using disodium 1-nitroso-2-naphthol-3, 6-disulphonate (nitroso-R salt) as a selective chromogenic reagent. Palladium and cobalt in the neutral pHs form red color complexes with nitroso-R in aqueous solutions and making spectrophotometric monitoring possible. Simultaneous determination of palladium and cobalt were performed by HPSAM--first derivative spectrophotometry. First derivative signals at the two pairs of wavelengths, 523 and 589 nm or 513 and 554 nm were monitored with the addition of standard solutions of palladium or cobalt, respectively. The method is able to accurately determine palladium/cobalt ratio 1:10 to 15:1 (wt/wt). Accuracy and reproducibility of the determination method on the various amounts of palladium and cobalt known were evaluated in their binary mixtures. To investigate selectivity of the method and to ensure that no serious interferences were observed the effects of diverse ions on the determination of palladium and cobalt were also studied. The recommended procedure was successfully applied to real and synthetic cobalt or palladium alloys, B-complex ampoules, a palladium-charcoal mixture and real water matrices.

Pneumatic Flow Injection Analysis-Tandem Spectrometer System for Iron Speciation

A pneumatic flow injection-tandem spectrometer system, without a delivery pump was used for the speciation of iron. In this system, the suction force of a pneumatic nebulizer of a flame absorption spectrometer was used for solution delivery through the manifold. The Fe(III) and total Fe concentrations were determined using thiocyanate ion in a UV-Vis spectrometer and a FAAS, respectively. The Fe(II) was determined by the difference. The calibration curves were linear up to 18 microg mL(-1) and 25 microg mL(-1) with detection limits of 0.09 microg mL(-1) and 0.07 microg mL(-1) for Fe(III) and Fe(II), respectively. The mid-range precision and accuracy were <2.5% and +/-3% for the two species, respectively, at a sampling rate of 120 h(-1). This system was applied for the determination of Fe(III) and Fe(II) in industrial water, natural water and spiked samples.

Simultaneous determination of Fe(II) and Fe(III) in pharmaceutical formulations with chromogenic mixed reagent by using principal component artificial neural network and multivariate calibration

The use of chemometric approaches for the simultaneous determination of Fe(II) and Fe(III) ions has been explored by means of a two component reagent. Mixed reagents of 1,10-phenanthroline and thiocyanate were used as a selective chromogenic system for speciation of Fe(II) and Fe(III). Although the complexes of Fe(II) and Fe(III) with mixed reagent show a spectral overlap, they have been simultaneously determined with chemometric approaches, such as principal component artificial neural network (PC-ANN), principal component regression (PCR) and partial least squares (PLS). A set of synthetic mixtures of Fe(II) and Fe(III) was evaluated and the results obtained by the applications of these chemometric approaches were discussed and compared. It was found that the PC-ANN and PLS methods afforded better precision relatively than its of PCR. PC-ANN and PLS methods were also applied satisfactorily in determination of Fe(II) and Fe(III) in pharmaceutical samples.

Recent Developments of Derivative Spectrophotometry and Their Analytical Applications

Articles about the development of derivative spectrophotometric methods and analytical applications of derivative spectrophotometry (DS) published in the last nine years (since 1994) are reviewed.

H-point standard addition method for simultaneous spectrophotometric determination of Co(II) and Ni(II) by 1-(2-pyridylazo)2-naphthol in micellar media

A very simple and selective spectrophotometric method for simultaneous determination of Co(II) and Ni(II) by 1-(2-pyridylazo) 2-naphthol (PAN), in micellar media, using H-point standard addition method (HPSAM) is described. The ligand and its metal complexes (Co(II)-PAN and Ni(II)-PAN) were made water-soluble by the neutral surfactant Triton X-100, and therefore, no extraction with organic solvents was required. Formation of both the complexes was complete within 10 min at pH 9 (adjusted by ammonia buffer). The linear range was 0.10-2.00 microg ml(-1) for Co(II) and 0.05-1.50 microg ml(-1) for Ni(II). The relative standard deviation (R.S.D.) for the simultaneous determination of 0.50 microg ml(-1) each of Co(II) and Ni(II) was 2.32 and 3.13%, respectively. Interference effects of common anions and cations were studied and the method was applied to simultaneous determination of Co(II) and Ni(II) in alloy samples. The method was compared with derivative spectrophotometric method.

Second and First-Derivative Spectrophotometry for Efficient Simultaneous and Individual Determination of Palladium and Cobalt Using 1-(2-Pyridylazo)-2-naphthol in Sodium Dodecylsulfate Micellar Media

1-(2-Pyridylazo)-2-naphthol (PAN) has been used for the simultaneous and individual determination of palladium and cobalt at trace levels. PAN complexes of palladium and cobalt at neutral pH form green-color neutral complexes, which are soluble in aqueous SDS micellar media. Under optimum conditions, calibration graphs for individual determinations by zero and first-derivative spectrophotometry, and also for simultaneous determinations by second-derivative spectrophotometry were obtained. A zero-crossing method using second-derivative spectrophotometry at 628 or 578 and 614 nm, respectively, for cobalt and palladium was used for simultaneous determinations. The method is able to determine the cobalt-to-palladium ratio, 5:1 to 1:10 (Wt/Wt), accurately. The accuracy and reproducibility of the determination method for various known amounts of cobalt and palladium in their binary mixtures were tested. The effects of diverse ions on the determination of cobalt and palladium to investigate the selectivity of the method were also studied. The recommended procedures were applied to a synthetic binary alloy, cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratorial chemical mixture, some synthetic cobalt-alloy samples, a Pd-charcoal catalyst, and some synthetic palladium alloys.