Adsorption stripping voltammetry of phenol at Nafion-modified glassy carbon electrode in the presence of surfactants

Determination of Paracetamol on Electrochemically Reduced Graphene Oxide-Antimony Nanocomposite Modified Pencil Graphite Electrode Using Adsorptive Stripping Differential Pulse Voltammetry

A simple, highly sensitive, accurate, and low-cost electrochemical sensor was developed for the determination of over-the-counter painkiller, paracetamol (PC). The enhanced sensing capabilities of the developed sensor were fabricated by the single-step modification of disposable pencil graphite electrodes (PGEs) with the simultaneous electrochemical reduction in graphene oxide and antimony (II) salts. For this purpose, an electrochemically reduced graphene oxide-antimony nanoparticle (ERGO-SbNP) nanocomposite material was prepared by trapping metallic nanoparticles between individual graphene sheets in the modification of PGEs. Structural characterization by FTIR and Raman spectroscopy was employed to confirm the presence of oxygen functional groups and defects in the conjugated carbon-based structure of GO. Morphological differences between the modified PGEs were confirmed by HRTEM and HRSEM for the presence of nanoparticles. The modified electrodes were further electrochemically characterized using CV and EIS. The electrooxidation of PC on an ERGO-SbNPs-PGE was achieved by adsorptive stripping differential pulse voltametric analysis in 0.1 mol·L-1 phosphate buffer solution at pH = 7.0. The optimum current response was used to record a detection limit of 0.057 µmol·L-1 for PC. The electrochemical sensor was further used in real sample analysis for a commercially available pharmaceutical tablet (500 mg PC), for which the percentage recovery was between 99.4% and 100.8%.

Improved Voltammetric Determination of Kynurenine at the Nafion Covered Glassy Carbon Electrode - Application in Samples Delivered from Human Cancer Cells

Nowadays, development of analytical methods responding to a need for rapid and accurate determination of human metabolites is highly desirable. Herein, an electrochemical method employing a Nafion-coated glassy carbon electrode (Nafion/GCE) has been developed for reliable determination of kynurenine (a key tryptophan metabolite) using a differential pulse adsorptive stripping voltammetry. To our knowledge, this is the first analytical method to allow for kynurenine determination at the Nafion-coated electrode. The methodology involves kynurenine pre-concentration in 0.1 M H₂SO₄ in the Nafion film at the potential of +0.5 V and subsequent stripping from the electrode by differential pulse voltammetry. Under optimal conditions, the sensor can detect 5 nM kynurenine (for the accumulation time of 60 seconds), but the limit of detection can be easily lowered to 0.6 nM by prolonging the accumulation time to 600 seconds. The sensor shows sensitivity of 36.25 μAμM⁻¹cm⁻² and 185.50 μAμM⁻¹cm⁻² for the accumulation time of 60 and 600 seconds, respectively. The great advantage of the proposed method is easy sensor preparation, employing drop coating method, high sensitivity, short total analysis time, and no need for sample preparation. The method was validated for linearity, precision, accuracy (using a high-performance liquid chromatography), selectivity (towards tryptophan metabolites and different amino acids), and recovery. The comprehensive microscopic and electrochemical characterization of the Nafion/GCE was also conducted with different methods including atomic force microscopy (AFM), optical profilometry, time-of-flight secondary ion mass spectrometry (TOF-SIMS), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). The method has been applied with satisfactory results for determination of kynurenine concentration in a culture medium collected from the human ovarian carcinoma cells SK-OV-3 and to measure IDO enzyme activity in the cancer cell extracts.

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.

Electrochemical oxidation of resorcinol: mechanistic insights from experimental and computational studies

This work investigates the mechanisms of resorcinol oxidation by density functional theory (DFT) calculation and cyclic voltammetry measurements. Complementary data from experimental and computational studies provide new insights into the reaction mechanisms. At both macro- and micro-electrodes, cyclic voltammetry of resorcinol is chemically and electrochemically irreversible over the whole pH range (1–14). Resorcinol molecules undergo a 1H⁺ 1e⁻ oxidation at pH < pK_a1 and a 1e⁻ oxidation at pH > pK_a2 to form radicals. The radicals then readily react to form dimers/polymers deposited on the electrode surface. All of the experimental findings are consistent with the proposed mechanisms, including the apparent transfer coefficient (β) of 0.6 ± 0.1, the slope of the peak potential (E_p) against pH of −54 mV pH⁻¹, the peak-shaped responses at micro-electrodes, and the fouling of the electrodes upon the oxidation of resorcinol. DFT calculation of the reaction energy of elementary steps and the eigenvalues of the highest occupied molecular orbital (HOMO) of the radical intermediates confirms that the (1H⁺) 1e⁻ oxidation is the energetically favorable pathway. In addition to mechanistic insights, an electrochemical sensor is developed for resorcinol detection at microelectrodes in low ionic strength samples with the sensitivity of 123 ± 4 nA μM⁻¹ and the limit of detection (3 s_B m⁻¹) of 0.03 μM.

Resorcinol oxidation mechanism was investigated by DFT calculation and cyclic voltammetry experiments at macro- and micro-electrodes (1 ≤ pH ≤ 14).

Novel Design of a Layered Electrochemical Dopamine Sensor in Real Samples Based on Gold Nanoparticles/β-Cyclodextrin/Nafion-Modified Gold Electrode

Change in the level of dopamine (DA) concentration in the human body causes critical diseases such as schizophrenia and Parkinson's disease. Therefore, the determination of DA concentration and monitoring its level in human body fluids is of great importance. An electrochemical sensor based on modification of the gold electrode surface with Nafion (NF), β-cyclodextrin (CD), and gold nanoparticles (AuNPs) was fabricated for the determination of DA in biological fluids. Combined impact of all the modifiers enhances the catalytic activity of the sensor. Gold nanoparticles increase the surface area of the sensor and enhance the electron transfer rate. CD plays a main role in enhancing the accumulation of protonated DA and forming stable complexes via electrostatic interactions and hydrogen bond formation. In addition, extra preconcentration of positively charged DA is achieved through ionic selectivity of NF. High electrocatalytic activity was achieved using the modified sensor for determination of DA in real urine samples in a wide concentration range, 0.05-280 μM with a low detection limit of 0.6 nM in the small linear dynamic range, 0.05-20 μM. Furthermore, common overlapped oxidation peaks of DA in presence of biologically interfering compounds at the gold electrode were resolved by using the modified sensor. Excellent recovery results were obtained using the proposed method for determination of DA in real urine samples.

Poly(quercetin)-bismuth nanowires as a new modifier for simultaneous voltammetric determination of dihydroxybenzene isomers and nitrite

Dihydroxybenzene isomers and nitrite, NO₂⁻, are present in the environment as highly toxic compounds and cause human cancer. In this study, for the first time poly(quercetin) (PQ) was synthesized from the reaction between quercetin (Q) and hydroquinone (HQ) as a linker. Bismuth nanowires (BNWs) were synthesized using a solvothermal technique and then the BNWs and PQ were used for preparation of a novel modified graphite paste electrode (GPE/PQ–BNWs) for simultaneous determination of dihydroxybenzene isomers; HQ, catechol (CC), resorcinol (RS) in the presence of NO₂⁻. The product was characterized using X-ray diffraction, field emission scanning electron microscopy and Fourier transform infrared spectroscopy. The electrochemical response characteristics of the modified GPE toward mix HQ, CC, RS and NO₂⁻ were investigated by cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under the optimum conditions, detection limits of 0.12, 0.2, 0.82 and 4.5 μM were obtained for HQ, CC, RS and NO₂⁻, respectively. Moreover, the GPE/PQ–BNWs were applied to determine HQ, CC, RS and NO₂⁻ in water samples with satisfactory results.

Dihydroxybenzene isomers and nitrite, NO₂⁻, are present in environment as the high toxic compounds and cause human cancer. A novel GPE/PQ–BNWs for simultaneous determination dihydroxybenzene isomers; HQ, CC, RS in presence of NO₂⁻.

Theoretical study of electron transfer process between fullerenes and neurotransmitters; acetylcholine, dopamine, serotonin and epinephrine in nanostructures [neurotransmitters].C n complexes

Neurotransmitters are the compounds which allow the transmission of signals from one neuron to the next across synapses. They are the brain chemicals that communicate information throughout brain and body. Fullerenes are a family of carbonallotropes, molecules composed entirely of carbon, that take the forms of spheres, ellipsoids, and cylinders. Various empty carbon fullerenes (Cn) with different carbon atoms have been obtained and investigated. Topological indices have been successfully used to construct effective and useful mathematical methods to establish clear relationships between structural data and the physical properties of these materials. In this study, the number of carbon atoms in the fullerenes was used as an index to establish a relationship between the structures of neurotransmitters (NTs) acetylcholine (AC) 1, dopamine (DP) 2, serotonin (SE) 3, and epinephrine (EP) 4 as the well-known redox systems and fullerenes C n (n = 60, 70, 76, 82, and 86) which create [NT].Cn; A-1 to A-5 up to D-1 to D-5. The relationship between the number of carbon atoms and the free energy of electron transfer (ΔG et(n); n = 1-4) is assessed using the Rehm-Weller equation for A-1 to A-5 up to D-1 to D-5 supramolecular [NT].Cn complexes. The calculations are presented for the four reduction potentials ( (Red.) E 1 to (Red.) E 4 ) of fullerenes C n . The results were used to calculate the four free energy values of electron transfer (ΔG et(1) to ΔG et(4)) of the supramolecular complexes A-1 to A-8 up to D-1 to D-8 for fullerenes C60 to C120. The first to fourth free activation energy values of electron transfer and the maximum wavelength of the electron transfers, ΔG (#) et(n) and λ et (n = 1-4), respectively, were also calculated in this study for A-1 to A-8 up to D-1 to D-8 in accordance with the Marcus theory.

Nickel oxide nanoparticles/ionic liquid crystal modified carbon composite electrode for determination of neurotransmitters and paracetamol

Ionic liquid crystals mimic the natural bio-based ionic liquid crystals such as cell membrane structures in their interactions with drugs.

Monitoring of rosmarinic acid accumulation in sage cell cultures using laccase biosensor

INTRODUCTION

A recently developed laccase based biosensor is used for polyphenols determination from in vitro Salvia cultures, the results being expressed as rosmarinic acid equivalent content.

OBJECTIVE

The aim of this work was to use a previously developed laccase biosensor for the determination of total phenolic content from in vitro cultivated Salvia, and to support the biosensors further application for the assessment of polyphenols metabolites.

METHODOLOGY

The biosensor was constructed by drop casting 3 μL of laccase solution and stabilisation with 0.1 % Nafion solution onto a DropSens carbon screen-printed electrode. Electrochemical measurements were carried out in a 0.1 mol/L phosphate buffer (pH 4.50), the applied working potential being -30 mV versus reference electrode.

RESULTS

The response of the biosensor developed was characterised in terms of repeatability, accuracy and precision; the limit of detection was 7.5 × 10(-7) mol/L, the limit of determination was 9.5 × 10⁻⁷ mol/L, and linear response range for rosmarinic acid was 1 × 10⁻⁶-10⁻⁵ mol/L.

CONCLUSION

A stable, sensitive and simple biosensor based on laccase-nafion was used for monitoring the total polyphenolic content from two in vitro cultivated plants. The biosensor response was free of electrochemical interferences and of possible interferences from growth media constituents, demonstrating a high sensitivity for rosmarinic acid determination in cell culture suspensions.

Online microchannel preconcentrator for carbofuran detection

A simple and rapid online microchannel preconcentrator coupled with an amperometric detection for the analysis of carbofuran using polyethylene glycol coated onto magnetic particle (PEG-magnetic particles) sorbents was developed. This simple-to-prepare microchannel preconcentrator used an external magnet to retain the PEG-magnetic particle sorbents inside the microchannel. Under optimum conditions, the system provided two linear ranges, from 0.01 to 10.0 mg L(-1) and from 10.0 to 130.0 mg L(-1) with a limit of detection of 8.7 ± 0.1 μg L(-1). The microchannel preconcentrator provided very good stability; it can be used for up to 326 consecutive injections of 5.0 mg L(-1) carbofuran with a relative standard deviation of less than 3%. The developed system provided a good microchannel-to-microchannel and a good electrode-to-electrode reproducibility (n = 6, %RSD < 1). It also provided an excellent selectivity when it was tested with two other carbamate pesticides, carbaryl and methomyl, with a 43 and 256 times higher detection sensitivity for carbofuran, respectively. The developed system was successfully applied to detect carbofuran in surface water samples obtained near vegetable plantation areas. The concentrations of carbofuran in these samples were found to be in the range of non-detectable to 0.047 ± 0.001 mg L(-1). The developed system is easy to operate and easy to couple with other analytical instruments and it could be easily adapted for the analysis of other polar organic contaminants.

Phenol determination on HDTMA-bentonite-based electrodes

The partial and complete substitution of cations in the interlayer region of clay with different amounts of hexadecyl trimethylammonium bromide (HDTMABr) was performed. The aim was to synthesize organo-bentonites to be used as constituents of porous electrodes for the electrooxidation of phenol. Domestic clay from Bogovina was subjected to a common procedure of the production of organo-bentonites. It included the following steps: grinding, sieving, Na-exchange, cation exchange and drying. The samples were characterized by X-ray diffraction (XRD) analysis, while the textural properties were evaluated by nitrogen physisorption. The multisweep cyclic voltammetry was applied to analyze the behavior of the clay modified glassy carbon electrode. The influences of the surfactant loading and pH of the support electrolyte were investigated. Rapid deactivation of electrodes occurred in an acidic environment, while good stability of the investigated electrodes was obtained in alkaline medium.