Determination of hydrocarbons in old creosote contaminated soil using headspace solid phase microextraction and GC-MS

Laccase as a useful assistant for maize to accelerate the phenanthrene degradation in soil

Polycyclic aromatic hydrocarbon (PAH) pollution has attracted much attention due to their wide distribution in soil environment and serious harm to human health. In order to establish an efficient and eco-friendly technology for remediation of PAH-contaminated soil, phytoremediation utilizing maize assisted with enzyme remediation was explored in this study. The results showed that the participation of laccase could promote the degradation of phenanthrene (PHE) from soil and significantly reduce the accumulation of PHE in maize. The degradation efficiency of PHE in soil could reach 77.19% under laccase-assisted maize remediation treatment, while the accumulation of PHE in maize roots and leaves decreased by 41.23% and 74.63%, respectively, compared to that without laccase treatment, after 24 days of maize cultivation. Moreover, it was found that laccase addition shifted the soil microbial community structure and promoted the relative abundance of some PAH degrading bacteria, such as Pseudomonas and Sphingomonas. In addition, the activities of some enzymes that were involved in PAH degradation process and soil nutrient cycle increased with the treatment of laccase enzyme. Above all, the addition of laccase could not only improve the removal efficiency of PHE in soil, but also alter the soil environment and reduce the accumulation of PHE in maize. This study provided new perspective for exploring the efficiency of the laccase-assisted maize in the remediation of contaminated soil, evaluating the way for reducing the risk of secondary pollution of plants in the phytoremediation process.

Analysis of volatile organic compounds in compost samples: A potential tool to determine appropriate composting time

Changes in volatile organic compound contents in compost samples during pig manure composting were studied using a headspace, solid-phase micro-extraction method (HS-SPME) followed by gas chromatography with mass spectrometric detection (GC/MS). Parameters affecting the SPME procedure were optimized as follows: the coating was carbon molecular sieve/polydimethylsiloxane (CAR/PDMS) fiber, the temperature was 60°C and the time was 30min. Under these conditions, 87 compounds were identified from 17 composting samples. Most of the volatile components could only be detected before day 22. However, benzenes, alkanes and alkenes increased and eventually stabilized after day 22. Phenol and acid substances, which are important factors for compost quality, were almost undetectable on day 39 in natural compost (NC) samples and on day 13 in maggot-treated compost (MC) samples. Our results indicate that the approach can be effectively used to determine the composting times by analysis of volatile substances in compost samples. An appropriate composting time not only ensures the quality of compost and reduces the loss of composting material but also reduces the generation of hazardous substances. The appropriate composting times for MC and NC were approximately 22days and 40days, respectively, during the summer in Zhejiang.

Identification of anthraquinone-degrading bacteria in soil contaminated with polycyclic aromatic hydrocarbons

Quinones and other oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) are toxic and/or genotoxic compounds observed to be cocontaminants at PAH-contaminated sites, but their formation and fate in contaminated environmental systems have not been well studied. Anthracene-9,10-dione (anthraquinone) has been found in most PAH-contaminated soils and sediments that have been analyzed for oxy-PAHs. However, little is known about the biodegradation of oxy-PAHs, and no bacterial isolates have been described that are capable of growing on or degrading anthraquinone. PAH-degrading Mycobacterium spp. are the only organisms that have been investigated to date for metabolism of a PAH quinone, 4,5-pyrenequinone. We utilized DNA-based stable-isotope probing (SIP) with [U-(13)C]anthraquinone to identify bacteria associated with anthraquinone degradation in PAH-contaminated soil from a former manufactured-gas plant site both before and after treatment in a laboratory-scale bioreactor. SIP with [U-(13)C]anthracene was also performed to assess whether bacteria capable of growing on anthracene are the same as those identified to grow on anthraquinone. Organisms closely related to Sphingomonas were the most predominant among the organisms associated with anthraquinone degradation in bioreactor-treated soil, while organisms in the genus Phenylobacterium comprised the majority of anthraquinone degraders in the untreated soil. Bacteria associated with anthracene degradation differed from those responsible for anthraquinone degradation. These results suggest that Sphingomonas and Phenylobacterium species are associated with anthraquinone degradation and that anthracene-degrading organisms may not possess mechanisms to grow on anthraquinone.

Application of solid-phase microextraction method to determine bioavailable fraction of PAH in hazardous waste

The solid-phase microextraction (SPME) method was developed to determine PAH free dissolved concentration (C(free)) in field leachates from hazardous waste disposal. SPME technique, involving a 100-μm polydimethylsiloxane (PDMS) fiber coupled to GC-MS was optimized for determination of C(free). The following PAH were found in bioavailable form: acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, with C(free) varying between 2.38 and 62.35 ng/L. Conventional solvent extraction was used for measurement of total concentration (C(total)) in the same samples, and ranging from 1.26 to 77.56 μg/L. Determining C(free) of the hydrophobic toxic pollutants could give useful information for risk assessment of the hazardous waste.

Low temperature oxidation of linseed oil: a review

This review analyses and summarises the previous investigations on the oxidation of linseed oil and the self-heating of cotton and other materials impregnated with the oil. It discusses the composition and chemical structure of linseed oil, including its drying properties. The review describes several experimental methods used to test the propensity of the oil to induce spontaneous heating and ignition of lignocellulosic materials soaked with the oil. It covers the thermal ignition of the lignocellulosic substrates impregnated with the oil and it critically evaluates the analytical methods applied to investigate the oxidation reactions of linseed oil.

Initiation of radical chains by singlet oxygen (1Δg), and their propagation underpin the mechanism of oxidation of linseed oil, leading to the self-heating and formation of volatile organic species and higher molecular weight compounds. The review also discusses the role of metal complexes of cobalt, iron and manganese in catalysing the oxidative drying of linseed oil, summarising some kinetic parameters such as the rate constants of the peroxidation reactions.

With respect to fire safety, the classical theory of self-ignition does not account for radical and catalytic reactions and appears to offer limited insights into the autoignition of lignocellulosic materials soaked with linseed oil. New theoretical and numerical treatments of oxidation of such materials need to be developed. The self-ignition induced by linseed oil is predicated on the presence of both a metal catalyst and a lignocellulosic substrate, and the absence of any prior thermal treatment of the oil, which destroys both peroxy radicals and singlet O2 sensitisers. An overview of peroxyl chemistry included in the article will be useful to those working in areas of fire science, paint drying, indoor air quality, biofuels and lipid oxidation.

Determination of 16 polycyclic aromatic hydrocarbons in water using fluorinated polyaniline-based solid-phase microextraction coupled with gas chromatography

The study on the performance of a fluorinated polyaniline (PANI) as a fiber coating for solid-phase microextraction (SPME) had been reported and 16 polycyclic aromatic hydrocarbons (PAHs) were selected to evaluate the performance of this fiber. Various parameters including sample volume, extraction temperature, time of desorption and extraction, pH and ionic strength were investigated intensively. A direct comparison between PANI-SPME fiber and commercial fiber was conducted. The results showed that the PANI-SPME coating had high affinity towards target compounds and the proposed method was successfully applied for the detection of real samples: rainfall and Taihu Lake water collected from Southern China. The whole PANI-SPME-GC method offers acceptable accuracy, precision and sensitivity and low detection limits, which is applicable to monitor trace levels of PAHs in real water bodies.

Polycyclic Aromatic Hydrocarbons in Air

Policiklički aromatski ugljikovodici (PAU) spojevi su koji se sastoje od dva ili više kondenziranih aromatskih prstenova. Nastaju prilikom nepotpunog izgaranja ili pirolize organskih tvari. Dokazano je da neki PAU imaju kancerogena, a neki mutagena svojstva, pa je stoga potrebno kontinuirano pratiti koncentracije PAU u zraku, vodi i tlu, te pokušati sanirati izvore PAU. PAU s dva ili tri aromatska prstena postojani su u plinovitoj fazi, dok se PAU s više aromatskih prstenova nalaze u zraku uglavnom vezani na čestice. Visoke koncentracije PAU prisutne su u atmosferi urbanih područja, a najviše su zimi kada su pojačane emisije iz kućnih ložišta. U ljetno doba koncentracije su niže jer je većina policikličkih aromatskih ugljikovodika nestabilna na visokim temperaturama, a osim toga dolazi do njihove oksidacije i fotooksidacije. Metode mjerenja PAU u zraku uključuju uzorkovanje prosisavanjem na filterski papir ili kruti adsorbens, ekstrakciju i kromatografsku analizu. U ovom radu prikazani su rezultati mjerenja benzo[a]pirena (BaP) kao glavnog predstavnika PAU na nekim lokacijama u svijetu. Razine BaP u svijetu uspoređene su s rezultatima mjerenja provedenim do sada u Hrvatskoj.

Extraction techniques for polycyclic aromatic hydrocarbons in soils

This paper aims to provide a review of the analytical extraction techniques for polycyclic aromatic hydrocarbons (PAHs) in soils. The extraction technologies described here include Soxhlet extraction, ultrasonic and mechanical agitation, accelerated solvent extraction, supercritical and subcritical fluid extraction, microwave-assisted extraction, solid phase extraction and microextraction, thermal desorption and flash pyrolysis, as well as fluidised-bed extraction. The influencing factors in the extraction of PAHs from soil such as temperature, type of solvent, soil moisture, and other soil characteristics are also discussed. The paper concludes with a review of the models used to describe the kinetics of PAH desorption from soils during solvent extraction.

Trapping effects of green and black tea extracts on peroxidation-derived carbonyl substances of seal blubber oil

Green and black tea extracts were employed to stabilize seal blubber oil at 60 degrees C for 140 h. On the basis of the headspace SPME-GC-MS analysis, with the addition of green/black tea extracts, the contents of acetaldehyde, acrolein, malondialdehyde, and propanal, four major lipid peroxidation products, were reduced. The inhibition rates of acrolein formation by green tea and black tea extracts were 98.40 and 96.41% respectively, and were 99.17 and 98.16% for malondialdehyde, respectively, much higher than the inhibition of the formation of acetaldehyde and propanal. Because malondialdehyde and acrolein are reactive carbonyl species (RCS) and recent studies have suggested that phenolics can directly trap RCS, this study also investigated whether green tea polyphenols can trap acrolein or not. Acrolein was reduced by 90.30% in 3 h of incubation with (-)-epigallocatechin-3-gallate (EGCG). Subsequent LC-MS analysis revealed the formation of new adducts of equal molars of acrolein and EGCG. The reaction site for acrolein was elucidated to be the A ring of EGCG as evidenced by LC-MS/MS analysis and by testing of the acrolein-trapping capacities of the analogous individual A, B, and C rings of EGCG. Thus, EGCG's direct trapping of RCS may also contribute to the significant reduction of acrolein and other aldehydes in the peroxidation of seal blubber oil.

Recent developments in headspace microextraction techniques for the analysis of environmental contaminants in different matrices

Headspace microextraction procedures such as solid-phase microextraction (SPME) and single drop microextraction (SDME) or liquid-phase microextraction (LPME) are increasingly used for the extraction of environmental organic pollutants from a variety of aqueous, viscous, semisolid and solid environmental and biological matrices. In this article, recent analytical applications of these methodologies when used as an isolation and trace enrichment step prior to the analysis of organic pollutants (pesticides, polycyclic aromatic hydrocarbons, polychlorinated compounds, organotin compounds, phenolic derivatives, aromatic amines, phthalates, etc.) by gas and liquid chromatography are reviewed. The applicability and inherent limitations of headspace microextraction are also discussed. The future direction of research in this field and general trends toward commercial applications are considered.

Characterization of an urban landfill soil by using physicochemical analysis and solid phase microextraction (SPME)-GC/MS

We have aimed at characterizing top soil samples taken in-situ from five different locations of the unregulated dumping site in Eskişehir/Turkey for a period of six months. The study is the first attempt in the city and in Turkey, regarding particularly the SPME (Solid Phase Microextraction Technique) analysis method utilized. A comprehensive research has been conducted to produce critical soil data to be used for indicating current risks as well as the urgency of rehabilitating the site and establishing a sanitary landfill in the site. Conventional physicochemical analytical methods and SPME technique were used to analyze the samples. Physicochemical analyses were performed for determining the pH, total dried matter, volatile matter, total nitrogen, phosphorus, macro elements and heavy metals. Meteorological data were also recorded for the same period. SPSS.10.0 statistical program was used to determine the correlation between meteorological data and physicochemical analysis results. Mean values were used in the correlation analyses. These data indicated that the air temperature and precipitation have significant effects on soil characteristics. SPME, coupled with GC/MS, was used to identify eighty six volatile and semi-volatile organic compounds contained in soil samples. The samples were extracted by headspace SPME with heating (DeltaHS-SPME). SPME analyses were conducted using a commercially available polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber having a film thickness of 65 microm (Supelco) as a capture medium. The experimentally optimized headspace sampling conditions were arranged (15 min. at 50 degrees C) before a 30 min. sampling period.

Phytotoxicity and accumulation of anthracene applied to the foliage and sandy substrate in lettuce and radish plants

The effects of anthracene (ANT) on the growth of two species of vegetable plants (Lactuca sativa L. and Raphanus sativus L.), which play an important role in the human diet, were studied. ANT was applied to the leaves of these plants by foliar deposition, in aerosol form, and to the sandy substrate in which the plants were grown in a greenhouse. It was found that ANT affected plant biomass, especially root biomass, in the case of both foliar and soil application. Under conditions of induced chemical stress, the dry matter of aboveground parts and roots was lower than that in control plants. The rate of photosynthesis decreased by about 20% in both plant species following foliar ANT application. A lower rate of transpiration was also observed in lettuce plants. After the foliar application of ANT, small quantities of the compound were found in the leaves only (0.06-0.18% of the total dose). ANT translocation to other parts of the plants was not observed. This compound underwent rapid chemical changes on the leaf surface under greenhouse conditions. After the application of ANT to a sandy substrate, this compound was detected in the roots and aboveground parts of plants, which indicates that it was transported throughout the plant. In a sandy substrate, the process of ANT decomposition was much slower-60-70% of the administered dose was measured in the soil after the completion of the experiment.

New cold-fiber headspace solid-phase microextraction device for quantitative extraction of polycyclic aromatic hydrocarbons in sediment

A new automated headspace solid-phase microextraction (HS-SPME) sampling device was developed, with the capability of heating the sample matrix and simultaneously cooling the fiber coating. The device was evaluated for the quantitative extraction of polycyclic aromatic hydrocarbons (PAHs) from solid matrices. The proposed device improves the efficiency of the release of analytes from the matrix, facilitates the mass transfer into the headspace and significantly increases the partition coefficients of the analytes, by creating a temperature gap between the cold-fiber (CF) coating and the hot headspace. The reliability and applicability of previously reported cold-fiber devices are significantly enhanced by this improvement. In addition, it can be easily adopted for full automation of extraction, enrichment and introduction of different samples using commercially available autosampling devices. Sand samples spiked with PAHs were used as solid matrices and the effect of different experimental parameters were studied, including the extraction temperature, extraction time, moisture content, and the effect of sonication and modifier under optimal experimental conditions, linear calibration curves were obtained in the range of 0.0009-1000 ng/g, with regression coefficients higher than 0.99 and detection limits that ranged from 0.3 to 3 pg/g. Reproducible, precise and high throughput extraction, monitoring and quantification of PAHs were achieved with the automated cold-fiber headspace solid-phase microextraction (CF-HS-SPME) device coupled to GC-flame ionization detection. Determination of PAHs in certified reference sediments using the proposed approach exhibited acceptable agreement with the standard values.

Linking organic pollutant (bio)availability with geosorbent properties and biomimetic methodology: a review of geosorbent characterisation and (bio)availability prediction

The interdependent link between structure and physico-chemical properties of geosorbents and sorption activity of hydrophobic organic pollutants (HOC) upon interaction with solid matrices has been established. The conclusions derived from these investigations have not been actively incorporated into risk assessment and remediation protocols since legislators prefer to adopt a conservative approach when the potential of contaminants to be released from soil matrices are evaluated. With the advent of spectroscopic techniques, it is possible to determine the molecular properties of the geosorbent organic matter which play a pivotal role in HOC retention. Physical-chemical and biological methods are employed to predict the potential for HOC release from sorbent matrices. This article serves as a review discussing the literature and reports the progress that has been made in these particular areas. The implication of employing molecular descriptor factors correlated with a biomimetic method to assess availability and risk is also considered.

Monitoring of polycyclic aromatic hydrocarbons and water-extractable phenols in creosotes and creosote-treated woods made and procurable in Japan

The recycling of disused railway sleepers treated with wood preservatives such as creosote as exterior wood for use in gardens has recently become popular in Japan. Creosote contains high quantities of polycyclic aromatic hydrocarbons (PAHs), and can lead to skin irritation and disease. In this work we have determined the amount of PAHs and water-extractable phenols in creosote and creosote-treated wood products such as railway sleepers and stakes for agricultural use that are either made or are procurable in Japan. PAHs were extracted with dichloromethane and analyzed by gas chromatography-mass spectrometry. Among carcinogenic PAHs, benz(a)anthracene was detected in the highest concentration, varying between 228 and 6328 microg/g in creosotes. Benzo(b)fluoranthene, benzo(k)fluoranthene and benzo(a)pyrene (BaP) were found in the range of 67-3541 microg/g. Almost all creosotes contained more than 50 microg/g of BaP, which is the upper limit level that is permitted in the European Union (EU). Creosote-impregnated wood products, such as brand-new or secondhand railway sleepers and foundations, contained large amounts of BaP (58-749 microg/g) and benz(a)anthracene (250-1282 microg/g). Concentrations of between 692 and 2489 microg/g of phenols were determined in the water extracts from creosotes, but the level was considerably less than the EU control value (3% by mass), and there was no correlation between the amount of water-extractable phenols and the amount of PAHs detected in each sample. The situation that consumers are free to use the creosotes containing a high concentration of carcinogens such as BaP may cause unacceptable damage to the health of persons handling these creosote products.

Multiple headspace solid-phase microextraction of 2-cyclopentyl-cyclopentanone in polyamide 6.6: possibilities and limitations in the headspace analysis of solid hydrogen-bonding matrices

The interactions between a polar analyte, 2-cyclopentyl-cyclopentanone, and a solid polar matrix, polyamide 6.6, during multiple headspace solid-phase microextraction (MHS-SPME) were studied. Strong hydrogen bonding between the analyte and the matrix was observed and shown to cause slow migration and adsorption of the analyte. These matrix effects led to erroneous quantitation despite the use of multiple headspace extraction. Addition of water disrupted the hydrogen bonding between the analyte and the matrix and a valid quantitation was achieved. The addition of water also increased the sensitivity and allowed the identification of 2,5-bis(cyclopentyl)-1-cyclopentanone. The amount of 2-cyclopentyl-cyclopentanone in five different polyamide 6.6 samples was measured using the developed multiple headspace solid-phase microextraction method with water-displacer. The measured concentrations were in the range of 1.44-15.61 microg/g. These concentrations were up to 30% higher than the concentrations measured after microwave-assisted extraction (MAE), which indicates incomplete recovery by MAE. The use of water as a displacer eliminated the matrix effects and complete recovery of the analyte was achieved by MHS-SPME.

Determination of benzene, toluene, ethylbenzene and xylenes in soils by multiple headspace solid-phase microextraction

Multiple headspace-solid phase microextraction (MHS-SPME) is a recently developed technique for the quantification of analytes in solid samples that avoids the matrix effect. This method implies several consecutive extractions from the same sample. In this way, the total area corresponding to complete extraction can be directly calculated as the sum of the areas of each individual extraction when the extraction is exhaustive, or through a mathematical equation when it is not exhaustive. In this paper, the quantitative determination of benzene, toluene, ethylbenzene and xylene isomers (BTEX) in a certified soil (RTC-CRM304, LGC Promochem) and in a contaminated soil by multiple HS-SPME coupled to a gas chromatography-flame ionisation detector (GC-FID) is presented. BTEX extraction was carried out using soil suspensions in water at 30 degrees C with a 75 microm carboxen-polydimethylsiloxane (CAR-PDMS) fibre and calibration was carried out using aqueous BTEX solutions at 30 degrees C for 30 min with the same fibre. BTEX concentration was calculated by interpolating the total peak area found for the soils in the calibration graphs obtained from aqueous solutions. The toluene, ethylbenzene, o-xylene and m,p-xylene concentrations obtained were statistically equal to the certified values.

Effects of low temperature and freeze-thaw cycles on hydrocarbon biodegradation in Arctic tundra soil

Degradation of petroleum hydrocarbons was monitored in microcosms with diesel fuel-contaminated Arctic tundra soil incubated for 48 days at low temperatures (-5, 0, and 7 degrees C). An additional treatment was incubation for alternating 24-h periods at 7 and -5 degrees C. Hydrocarbons were biodegraded at or above 0 degrees C, and freeze-thaw cycles may have actually stimulated hydrocarbon biodegradation. Total petroleum hydrocarbon (TPH) removal over 48 days in the 7, 0, and 7 and -5 degrees C treatments, respectively, was 450, 300, and 600 microg/g of soil. No TPH removal was observed at -5 degrees C. Total carbon dioxide production suggested that TPH removal was due to biological mineralization. Bacterial metabolic activity, indicated by RNA/DNA ratios, was higher in the middle of the experiment (day 21) than at the start, in agreement with measured hydrocarbon removal and carbon dioxide production activities. The total numbers of culturable heterotrophs and of hydrocarbon degraders did not change significantly over the 48 days of incubation in any of the treatments. At the end of the experiment, bacterial community structure, evaluated by ribosomal intergenic spacer length analysis, was very similar in all of the treatments but the alternating 7 and -5 degrees C treatment.