The Chemistry of Perfluoroaryl Boranes

A Highly Sterically Encumbered Boron Lewis Acid Enabled by an Organotellurium-Based Ligand

Lewis acidic boron compounds are ubiquitous in chemistry due to their numerous applications, yet tuning and optimizing their properties towards different purposes is still a challenging field of research. In this work, the boron-based Lewis acid B[OTeF3(C6F5)2]3 was synthesized by reaction of the teflate derivative HOTeF3(C6F5)2 with BCl3 or BCl3 ⋅ SMe2. This new compound presents a remarkably high thermal stability up to 300 °C, as well as one of the most sterically encumbered boron centres known in the literature. Theoretical and experimental methods revealed that B[OTeF3(C6F5)2]3 exhibits a comparable Lewis acidity to that of the well-known B(C6F5)3. The affinity of B[OTeF3(C6F5)2]3 towards pyridine was accessed by Isothermal Titration Calorimetry (ITC) and compared to that of B(OTeF5)3 and B(C6F5)3. The ligand-transfer reactivity of this new boron compound towards different fluorides was demonstrated by the formation of an anionic Au(III) complex and a hypervalent iodine(III) species.

Deoxyfluorination of 1°, 2°, and 3° Alcohols by Nonbasic O-H Activation and Lewis Acid-Catalyzed Fluoride Shuttling

A method for deoxyfluorination of aliphatic primary, secondary, and tertiary alcohols is reported, employing a nontrigonal phosphorus triamide for base-free alcohol activation in conjunction with an organic soluble fluoride donor and a triarylborane fluoride shuttling catalyst. Mechanistic experiments are consistent with a reaction that proceeds by the collapse of an oxyphosphonium fluoroborate ion pair with fluoride transfer. The substrate scope complements existing deoxyfluorination methods and enables the preparation of homochiral secondary and tertiary alkylfluorides by stereoinversion of the substrate alcohol.

Binding, Sensing, And Transporting Anions with Pnictogen Bonds: The Case of Organoantimony Lewis Acids

Motivated by the discovery of main group Lewis acids that could compete or possibly outperform the ubiquitous organoboranes, several groups, including ours, have engaged in the chemistry of Lewis acidic organoantimony compounds as new platforms for anion capture, sensing, and transport. Principal to this approach are the intrinsically elevated Lewis acidic properties of antimony, which greatly favor the addition of halide anions to this group 15 element. The introduction of organic substituents to the antimony center and its oxidation from the + III to the + V state provide for tunable Lewis acidity and a breadth of applications in supramolecular chemistry and catalysis. The performances of these antimony-based Lewis acids in the domain of anion sensing in aqueous media illustrate the favorable attributes of antimony as a central element. At the same time, recent advances in anion binding catalysis and anion transport across phospholipid membranes speak to the numerous opportunities that lie ahead in the chemistry of these unique main group compounds.

Post-synthesis from Lewis acid–base interaction: an alternative way to generate light and harvest triplet excitons

The changes in absorption and emission of fluorescent materials with the introduction of Lewis acids have been frequently observed due to either physical or chemical interactions. In this mini-review, we elaborate how Lewis acids adjust the optical properties and the bandgap of luminescent materials by simple coordination reactions. It is common that fluorescent materials containing Lewis basic nitrogen heterocycles are more likely to provide the feasible band gap modulation. The essence of such phenomenon originates from Lewis acid–base coordination and adducts, which highly depends on the electron-accepting property of the Lewis acids. This intermolecular mechanism, considered as post-synthesis of new luminescent compounds offers promising applications in sensing and electroluminescence by manipulating the frontier molecular orbital energy levels of organic conjugated materials, simply based on Lewis acid–base chemistry.

Exploring the Reactivity of B‐Connected Carboranylphosphines in Frustrated Lewis Pair Chemistry: A New Frame for a Classic System

The primary phosphines MesPH₂ and tBuPH₂ react with 9‐iodo‐m‐carborane yielding B9‐connected secondary carboranylphosphines 1,7‐H₂C₂B₁₀H₉‐9‐PHR (R=2,4,6‐Me₃C₆H₂ (Mes; 1  a), tBu (1  b)). Addition of tris(pentafluorophenyl)borane (BCF) to 1  a, b resulted in the zwitterionic compounds 1,7‐H₂C₂B₁₀H₉‐9‐PHR(p‐C₆F₄)BF(C₆F₅)₂ (2  a, b) through nucleophilic para substitution of a C₆F₅ ring followed by fluoride transfer to boron. Further reaction with Me₂SiHCl prompted a H−F exchange yielding the zwitterionic compounds 1,7‐H₂C₂B₁₀H₉‐9‐PHR(p‐C₆F₄)BH(C₆F₅)₂ (3  a, b). The reaction of 2  a, b with one equivalent of R'MgBr (R’=Me, Ph) gave the extremely water‐sensitive frustrated Lewis pairs 1,7‐H₂C₂B₁₀H₉‐9‐PR(p‐C₆F₄)B(C₆F₅)₂ (4  a, b). Hydrolysis of the B−C₆F₄ bond in 4  a, b gave the first tertiary B‐carboranyl phosphines with three distinct substituents, 1,7‐H₂C₂B₁₀H₉‐9‐PR(p‐C₆F₄H) (5  a, b). Deprotonation of the zwitterionic compounds 2  a, b and 3  a, b formed anionic phosphines [1,7‐H₂C₂B₁₀H₉‐9‐PR(p‐C₆F₄)BX(C₆F₅)₂]⁻[DMSOH]⁺ (R=Mes, X=F (6  a), R=tBu, X=F (6  b); R=Mes, X=H (7  a), R=tBu, X=H (7  b)). Reaction of 2  a, b with an excess of Grignard reagents resulted in the addition of R’ at the boron atom yielding the anions [1,7‐H₂C₂B₁₀H₉‐9‐PR(p‐C₆F₄)BR’(C₆F₅)₂]⁻ (R=Mes, R’=Me (8  a), R=tBu, R’=Me (8  b); R=Mes, R’=Ph (9  a), R=tBu, R’=Ph (9  b)) with [MgBr(Et₂O)_n]⁺ as counterion. The ability of the zwitterionic compounds 3  a, b to hydrogenate imines as well as the Brønsted acidity of 3  a were investigated.

The Non-Ancillary Nature of Trimethylsilylamide Substituents in Boranes and Borinium Cations

The known boranes (R(Me₃Si)N)₂BF (R=Me₃Si 1, tBu 2, C₆F₅3, o‐tol 4, Mes 5, Dipp 6) and borinium salts (R(Me₃Si)N)₂B][B(C₆F₅)₄] (R=Me₃Si 7, tBu 8) are prepared and fully characterized. Compound 7 is shown to react with phosphines to generate [R₃PSiMe₃]⁺ and [R₃PH]⁺ (R=Me, tBu). Efforts to generate related borinium cations via fluoride abstraction from (R(Me₃Si)N)₂BF (R=C₆F₅3, o‐tol 4, Mes 5) gave complex mixtures suggesting multiple reaction pathways. However for R=Dipp 6, the species [(μ‐F)(SiMe₂N(Dipp))₂BMe][B(C₆F₅)₄] was isolated as the major product, indicating methyl abstraction from silicon and F/Me exchange on boron. These observations together with state‐of‐the‐art DFT mechanistic studies reveal that the trimethylsilyl‐substituents do not behave as ancillary subsitutents but rather act as sources of proton, SiMe₃ and methyl groups.

Taming the Lewis Superacidity of Non-Planar Boranes: C-H Bond Activation and Non-Classical Binding Modes at Boron

The rational design of a geometrically constrained boron Lewis superacid featuring exceptional structure and reactivity is disclosed. It allowed the formation of non-classical electron deficient B-H-B type of bonding which was supported by spectroscopic and X-ray diffraction parameters as well as computational studies. Taming the pyramidal Lewis acid electrophilicity through weak coordinating anion dissociation enabled a series of highly challenging chemical transformations such as Csp 2 -H and Csp 3 -H activation under frustrated Lewis pair regime and the cleavage of Csp 3 -Si bonds. The demonstration of such type of rich chemical behavior and flexibility on a single molecular compound make it a unique mediator of chemical transformations generally restricted to transition metals.

Synthesis, Characterization, and Density Functional Theory Studies of Three-Dimensional Inorganic Analogues of 9,10-Diboraanthracene-A New Class of Lewis Superacids

The three-dimensional inorganic analogues of 9,10-diboraanthracene, B₂X₂(C₂B₁₀H₁₀)₂ (X = Cl, 1; X = Br, 2), were attained by salt elimination of Li₂C₂B₁₀H₁₀ and trihaloboranes. The methyl- and phenyl-substituted compounds B₂Me₂(C₂B₁₀H₁₀)₂ (3) and B₂Ph₂(C₂B₁₀H₁₀)₂ (4) were obtained by treating 1 or 2 with the corresponding Grignard reagents. These compounds were fully characterized by NMR, cyclic voltammetry (CV), IR, and single-crystal X-ray diffraction analyses. Experimental (CV and Gutmann-Beckett method) and computational (fluoride ion affinity, hydride ion affinity and LUMO energy) results suggest that the order of Lewis acidity is 2 > 1 > 4 > 3 > SbF₅. Treatment of 1 or 2 with HSiEt₃ gave a rare neutral borane-silane adduct, (Et₃SiH)₂B₂H₂(C₂B₁₀H₁₀)₂ (5). The equilibrium of 5 in solution was thoroughly investigated by spectroscopy and quantum calculations.

Lewis pairing and frustration of group 13/15 elements geometrically enforced by (ace)naphthalene, biphenylene and (thio)xanthene backbones

The synthesis, structure, and reactivity of mixed group 13/group 15 compounds (E¹³ = B, Al, Ga, In, Tl; E¹⁵ = N, P, Sb, Bi) featuring a rigid (ace)naphthalene or (thio)xanthene backbone are discussed in this review. The backbone may either enforce or prevent E¹⁵→E¹³ interactions, resulting in Lewis pairing or frustration. The formation of strong E¹⁵→E¹³ interactions is possible upon peri-substitution of (ace)naphthalenes. This gives the opportunity to access and study highly reactive species, as exemplified by P-stabilised borenium salts and boryl radicals. In turn, rigid expanded spacers such as biphenylenes, (thio)xanthenes and dibenzofurans impose long distances and geometrically prevent E¹⁵→E¹³ interactions. Such P-B derivatives display ambiphilic coordination properties and frustrated Lewis pair behaviour towards small molecules, their preorganised structure favouring reversible interaction/activation. Throughout the review, the importance of the scaffold in enforcing or preventing E¹⁵→E¹³ interactions is highlighted and discussed based on experimental data and theoretical calculations.

Strong Lewis and Brønsted Acidic Sites in the Borosulfate Mg3 [H2 O→B(SO4 )3 ]2

Borosulfates provide fascinating structures and properties that go beyond a pure analogy to silicates. Mg3 [H2 O→B(SO4 )3 ]2 is the first borosulfate featuring a boron atom solely coordinated by three tetrahedra. Thus, the free Lewis acidic site forms a Lewis acid-base adduct with a water molecule. This is unprecedented for borosulfate chemistry and even for borates. Quantum chemical calculations on water exchange reactions with BF3 and B(C6 F5 )3 revealed a higher Lewis acidity for the borosulfate anion. Moreover, proton exchange reactions showed a higher Brønsted acidity than comparable silicates or phosphates. Additionally, Mg3 [H2 O→B(SO4 )3 ]2 was characterised by X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and density functional theory (DFT) calculations.

π-Conjugated Materials Derived From Boron-Chalcogenophene Combination. A Brief Description of Synthetic Routes and Optoelectronic Applications

Functional materials composed of Boron-chalcogenophene conjugates have emerged as promising ensemble featuring commendable optoelectronic properties. This review describes the categories, synthetic routes and optoelectronic applications of a range of boron-chalcogenophene conjugates. Conjugation and linking of different types of tri- and tetra-coordinated boron moieties with chalcogenophenes have remained an important strategy for constructing a range of functional materials. Synthetic protocols have been devised to efficiently prepare such chemically robust conjugates, often exhibiting a myriad of photophysical properties, redox capabilities and also solid-state behaviors. Tin-boron and silicon-boron exchange protocols have been efficiently adapted to access these boron-chalcogenophenes. Few other commonly used methods namely, hydroboration of alkynes as well as electrophilic borylations are also mentioned. The chemical and electronic properties of such boron-chalcogenophene conjugates are directly influenced by the strong Lewis acid character of trivalent boranes which can further alter the intra- and inter- molecular Lewis acid-base interactions. Apart from the synthetic protocols, recent advances in the application of these boron-chalcogenophene conjugates towards analyte sensing, organic electronics, molecular switches and several other aspects will be discussed in this review.

Systematic Design of a Frustrated Lewis Pair Containing Methyleneborane and Carbene for Dinitrogen Activation

Activation of atmospherically abundant dinitrogen (N₂) by metal-free species under mild reaction conditions has been one of the most challenging areas in chemistry for decades. Very recent but limited progress in N₂ activation by boron species, including two-coordinated borylene and methyleneborane and three-coordinated borole and borane, has been made toward metal-free N₂ activation. Here, we systematically probe an experimentally viable frustrated Lewis pair (FLP) containing two moieties (methyleneborane and carbene) for N₂ activation via density functional theory (DFT) calculations, which has proven to be an efficient approach for N₂ activation in a thermodynamically and kinetically favorable manner. Aromaticity is found to play a crucial role in stabilization of the product. This study could be a valuable alternative for the development of metal-free N₂ activation chemistry, highlighting great potential of FLP for N₂ activation and functionalization.

Tris(pentafluorophenyl)borane catalyzed C-C and C-heteroatom bond formation

A series of boron based Lewis acids have been reported to date, but among them, tris(pentafluorophenyl)borane (BCF) has gained the most significant attention in the synthetic chemistry community. The viability of BCF as a potential Lewis acid catalyst has been vastly explored in organic and materials chemistry due to its thermal stability and commercial availability. Most explorations of BCF chemistry in organic synthesis has occurred in the last two decades and many new catalytic reactivities are currently under investigation. This review mainly focuses on recent reports from 2018 onwards and provides a concise knowledge to the readers about the role of BCF in metal-free catalysis. The review has mainly been categorized by different types of organic transformation mediated through BCF catalysis for the C-C and C-heteroatom bond formation.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Methylene Bridging Effect on the Structures, Lewis Acidities and Optical Properties of Semi-planar Triarylboranes

Three synthetic methods towards semi-planar triarylboranes with two aryl rings connected by a methylene bridge have been developed. The fine-tuning of their stereoelectronic properties and Lewis acidities was achieved by introducing fluorine, methyl, methoxy, n-butyl and phenyl groups either at their exocyclic or bridged aryl rings. X-ray diffraction analysis and quantum-chemical calculations provided quantitative information on the structural distortion experienced by the near planar hydro-boraanthracene skeleton during the association with Lewis bases such as NH₃ and F^- . Though the methylene bridge between the ortho-positions of two aryl rings of triarylboranes decreased the Gibbs free energies of complexation with small Lewis bases by less than 5 kJ mol^-1 relative to the classical Lewis acid BAr₃ , the steric shielding of the CH₂ bridge is sufficient to avoid the formation of Lewis adducts with larger Lewis bases such as triarylphosphines. A newly synthesized spirocyclic amino-borane with a long intramolecular B-N bond that could be dissociated under thermal process, UV-irradiation, or acidic conditions might be a potential candidate in Lewis pairs catalysis.

When Attempting Chain Extension, Even Without Solvent, It Is Not Possible to Avoid Chojnowski Metathesis Giving D3

A simple, mild and efficient method to prepare HSi- or HOSi-telechelic, high-molecular-weight polydimethylsiloxane polymers (to 41,600 g·mol^-1) using the one-shot hydrolysis of M^HM^H is reported; titration of the water allowed for higher molecular weights (to 153,900 g·mol^-1). The "living" character of the chain extension processes was demonstrated by adding a small portion of M^HM^H and B(C₆F₅)₃ (BCF) to a first formed polymer, which led to a ~2-fold, second growth in molecular weight. The heterogeneous reaction reached completion in less than 30 min, much less in some cases, regardless of whether it was performed neat or 50 wt% in dry toluene; homogeneous reactions in toluene were much slower. The process does not involve traditional redistribution, as judged by the low quantities (<3%) of D₄ produced. However, it is not possible to avoid Chojnowski metathesis from M^HDDM^H giving D₃, which occurs competitively with chain extension.

Single-Electron Transfer in Frustrated Lewis Pair Chemistry

Frustrated Lewis pairs (FLPs) are well known for their ability to activate small molecules. Recent reports of radical formation within such systems indicate single-electron transfer (SET) could play an important role in their chemistry. Herein, we investigate radical formation upon reacting FLP systems with dihydrogen, triphenyltin hydride, or tetrachloro-1,4-benzoquinone (TCQ) both experimentally and computationally to determine the nature of the single-electron transfer (SET) events; that is, being direct SET to B(C6 F5 )3 or not. The reactions of H2 and Ph3 SnH with archetypal P/B FLP systems do not proceed via a radical mechanism. In contrast, reaction with TCQ proceeds via SET, which is only feasible by Lewis acid coordination to the substrate. Furthermore, SET from the Lewis base to the Lewis acid-substrate adduct may be prevalent in other reported examples of radical FLP chemistry, which provides important design principles for radical main-group chemistry.

Linkage Isomerism Leading to Contrasting Carboboration Chemistry: Access to Three Constitutional Isomers of a Borylated Phosphaalkene

We describe the reactivity of two linkage isomers of a boryl-phosphaethynolate, [B]OCP and [B]PCO (where [B]=N,N'-bis(2,6-diisopropylphenyl)-2,3-dihydro-1H-1,3,2-diazaboryl), towards tris- (pentafluorophenyl)borane (BCF). These reactions afforded three constitutional isomers all of which contain a phosphaalkene core. [B]OCP reacts with BCF through a 1,2 carboboration reaction to afford a novel phosphaalkene, E-[B]O{(C6 F5 )2 B}C=P(C6 F5 ), which subsequently undergoes a rearrangement process involving migration of both the boryloxy and pentafluorophenyl substituents to afford Z-{(C6 F5 )2 B}(C6 F5 )C=PO[B]. By contrast, [B]PCO undergoes a 1,3-carboboration process accompanied by migration of the N,N'-bis(2,6-diisopropylphenyl)-2,3-dihydro-1H-1,3,2-diazaboryl to the carbon centre.

Multinuclear NMR Studies on Lewis Acid-Lewis Base Interactions between Bis(pentafluorophenyl)borinic Acid and Uranyl β-Diketonato Complexes in Toluene

In order to examine the possibility of Lewis acid-Lewis base (LA-LB) interactions between the boron atom of B(C₆F₅)₂OH and the oxo groups ("yl" oxygen atoms) of uranyl β-diketonato complexes, we have measured the ¹H, ¹¹B, ¹⁷O, ¹⁹F NMR and IR spectra of toluene solutions containing β-diketonato complexes [UO₂(acac)₂DMSO or UO₂(dfh)₂DMSO, where acac = 2,4-pentanedionate, dfh = 1,1,1,2,2,6,6,7,7,7-decafluoroheptane-3,5-dionate, and DMSO = dimethyl sulfoxide] and B(C₆F₅)₂OH. ¹¹B and ¹⁷O NMR spectra of solutions containing UO₂(dfh)₂DMSO and B(C₆F₅)₂OH showed no change in their chemical shifts regardless of the [B(C₆F₅)₂OH]/[UO₂(dfh)₂DMSO] ratio. This indicates that there were no apparent interactions between B(C₆F₅)₂OH and UO₂(dfh)₂DMSO. On the other hand, in the corresponding NMR spectra of solutions containing UO₂(acac)₂DMSO and B(C₆F₅)₂OH, new signals were observed at a higher field than signals observed in the solutions containing only B(C₆F₅)₂OH or UO₂(acac)₂DMSO, and their intensity changed with the [B(C₆F₅)₂OH]/[UO₂(acac)₂DMSO] ratio. These results reveal that a complex with LA-LB interaction (B···O═U) between the boron atom of B(C₆F₅)₂OH and the "yl" oxygen atom of UO₂(acac)₂DMSO was formed. IR spectra also supported such complex formation; i.e., the asymmetric O═U═O stretching band of UO₂(acac)₂DMSO was observed to shift from 897 to 810 cm^-1 with the addition of B(C₆F₅)₂OH. Moreover, ¹⁹F NMR spectra indicated that 1:1 and 2:1 LA-LB complexes exist in equilibrium, UO{OB(C₆F₅)₂OH}(acac)₂DMSO + B(C₆F₅)₂OH = U{OB(C₆F₅)₂OH}₂(acac)₂DMSO. The thermodynamic parameters for this equilibrium were obtained as K = (2.5 ± 0.6) × 10² M^-1 (at 25 °C), ΔH = -42.4 ± 5.2 kJ mol^-1, and ΔS = -96.7 ± 19.4 J K^-1 mol^-1. In ¹H NMR spectra, the signal due to -CH groups of UO₂(acac)₂DMSO disappeared, and three signals due to the corresponding -CH groups newly appeared with an increase in the [B(C₆F₅)₂OH]/[UO₂(acac)₂DMSO] ratio. From these phenomena, it is proposed that 1:1 and 2:1 LA-LB complexes having interactions between the -CH groups of acac and the -OH group of coordinated B(C₆F₅)₂OH are formed depending on the [B(C₆F₅)₂OH]/[UO₂(acac)₂DMSO] ratio.

Optimizing the Energetics of FLP-Type H2 Activation by Modulating the Electronic and Structural Properties of the Lewis Acids: A DFT Study

The great potential of frustrated Lewis pairs (FLPs) as metal-free catalysts for activation of molecular hydrogen has attracted increasing interest as an alternative to transition-metal catalysts. However, the complexity of FLP systems, involving the simultaneous interaction of three molecules, impedes a detailed understanding of the activation mechanism and the individual roles of the Lewis acid (LA) and Lewis base (LB). In the present work, using density functional theory (DFT) calculations, we examine the reactivity of 75 FLPs for the H₂ splitting reaction, including a series of experimentally investigated LAs combined with conventional phosphine-based (tBu₃P) and oxygen-based (i.e., ethereal solvent) Lewis bases. We find that the catalytic activity of the FLP is the result of a delicate balance of the LA and LB strengths and their bulkiness. The H₂ splitting reaction can be changed from endergonic to exergonic by tuning the electrophilicity of the LA. Also, a more nucleophilic LB results in a more stable ion pair product and a lower barrier for the hydrogen splitting. The bulkiness of the LB leads to an early transition state to reduce steric hindrance and lower the barrier height. The bulkiness of the fragments determines the cavity size in the FLP complex, and a large cavity allows for a larger charge separation in the ion pair configuration. A shorter proton-hydride distance in this product complex correlates with a stronger attraction between the fragments, which forms more reactive ion pairs and facilitates the proton and hydride donations in the subsequent hydrogenation process. These insights may help with rationalizing the experimentally observed reactivities of FLPs and with designing better FLP systems for hydrogenation catalysis and hydrogen storage.

Reactions of an anionic chelate phosphane/borata-alkene ligand with [Rh(nbd)Cl]2, [Rh(CO)2Cl]2 and [Ir(cod)Cl]2

Borata-alkenes can serve as anionic olefin equivalent ligands in transition metal chemistry. A chelate ligand of this type is described and used for metal coordination. Deprotonation of the Mes₂P(CH₂)₂B(C₆F₅)₂ frustrated Lewis pair in the α-CH[B] position gave the methylene-bridged phosphane/borata-alkene anion. It reacted with the [Rh(nbd)Cl] or [Rh(CO)₂Cl] dimers to give the respective neutral chelate [P/C[double bond, length as m-dash]B][Rh] complexes. The reaction of the [P/C[double bond, length as m-dash]B]^- anion with [Ir(cod)Cl]₂ proceeded similarly, only that the complex underwent a subsequent oxidative addition reaction at the mesityl substituent. Both the resulting Ir(iii)hydride complex 15 and the P/borata-alkene Rh system 12 were used as hydrogenation catalysts. The [P/C[double bond, length as m-dash]B(C₆F₅)₂]Rh(nbd) complex 12 served as a catalyst for arylacetylene polymerization.

Chemo- and Diastereoselective Hydrosilylation of Amorphadiene toward the Synthesis of Artemisinin

A formal synthesis of artemisinin starting from amorphadiene is described. This new route relies on the development of a catalytic chemo- and diastereoselective hydrosilylation. The practicability of this method is demonstrated by converting amorphadiene to dihydroartemisinic aldehyde using a one-pot hydrosilylation/oxidation sequence, minimizing the number of purifications and maximizing the productivity through a practical one-pot procedure. In addition, this approach can be coupled with a crystallization-induced diastereoselective transformation (CIDT) to enhance the optical purity of the key target intermediate, dihydroartemisinic aldehyde.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

Hydroxytricyanoborate Anion: Synthetic Aspects and Structural, Chemical, and Spectroscopic Properties

In recent years, salts of the hydridotricyanoborate anion [BH(CN)₃]^- (MHB) have become readily available. In spite of the unusually high stability of the MHB anion, it can be used as a valuable starting material for the preparation of selected tricyanoborates, for example, the boron-centered nucleophile B(CN)₃^2-. A further unprecedented example is the hydroxytricyanoborate anion [B(OH)(CN)₃]^- that is accessible by oxidation of (H₃O)MHB with elemental bromine in water. The Brønsted acid (H₃O)[B(OH)(CN)₃] was isolated as a crystalline solid. It serves as a versatile starting material for the synthesis of coordination compounds, metal salts, and ionic liquids. The [B(OH)(CN)₃]^- anion shows a rich coordination chemistry and a high tendency to form hydrogen-bonded motifs as demonstrated by a series of salts with different types of cations. Furthermore, the [B(OH)(CN)₃]^- anion itself serves as starting material for new tricyanoborates such as the unusual trianion [B{OB(CN)₃}₃]^3- and the silylated anions [B(OSiR₃)(CN)₃]^- (R = Me, Et, Ph). Some of these follow-up products have been characterized by single-crystal X-ray diffraction, e.g., [nBu₄N]₃[B{OB(CN)₃}₃] and [nBu₄N][B(OSiPh₃)(CN)₃].

Unique reactivity of B in B[Ge9Y3]3 (Y = H, CH3, BO, CN): formation of a Lewis base

Boron compounds usually exhibit Lewis acidity at the boron center due to the presence of vacant p-orbitals. We show that this chemistry can be altered by an appropriate choice of ligands to decorate the boron center. To elucidate this effect, we studied the interactions of boron with two classes of ligands, one based on penta-substituted phenyl species (C₆X₅, X = F, BO, CN) and the other based on Zintl-ion-based groups (Ge₉Y₃, Y = H, CH₃, BO, CN). An in-depth analysis of the charges and Fukui function values at the local atomic sites of the substituted boron derivatives B(C₆X₅)₃ and B[Ge₉Y₃]₃ shows that the B-center in the former is electrophilic, while it is nucleophilic in the latter. The chemical stability of the B[Ge₉Y₃]₃ species is shown to be due to the presence of strong 2c-2e bonds between the B and Ge centers. Thus, the general notion of the Lewis acid nature of a boron center depends upon the choice of the ligand.

High-Throughput Synthesis and Characterization of Aryl Silicones by Using the Piers-Rubinsztajn Reaction

Arylsilicones are widely exploited for their thermal and optical properties. The creation of phenylsilicone elastomers with specific physical properties is typically done by a "one-off" formulation and test process. Herein, it is demonstrated that high-throughput synthesis methods can be used to rapidly prepare a series of arylsilicone elastomers and then the relative impact of different aryl groups on their physical properties is assessed. Aromatic groups were incorporated into polydimethylsiloxane (PDMS) elastomers by exploiting the relative reactivity of different functional groups in the Piers-Rubinsztajn reaction. To analyze trends in the silicone mechanical properties as a function of increasing aryl concentration-structure/property relationships-libraries of elastomers were both quickly synthesized and characterized by using high-throughput suites starting from low viscosity silicone oils/monomers in 96-well plates. Liquid handling parameters were optimized to effectively work with the silicones. Incorporating aryl instead of alkyl crosslinkers into the PDMS backbone increased the silicone elastomer modulus by approximately 50 % (at a crosslink density of 6 %); elastomers prepared with an aromatic crosslinker with three contact points led to much higher moduli compared with those with one contact point at the same crosslink density. When located at precise rather than random points on the silicone chains, diphenylsilicones had lower moduli than analogous monophenylsilicones.

Lewis Acid Catalyzed Transfer Hydromethallylation for the Construction of Quaternary Carbon Centers

The design and gram-scale synthesis of a cyclohexa-1,4-diene-based surrogate of isobutene gas is reported. Using the highly electron-deficient Lewis acid B(C6 F5 )3 , application of this surrogate in the hydromethallylation of electron-rich styrene derivatives provided sterically congested quaternary carbon centers. The reaction proceeds by C(sp3 )-C(sp3 ) bond formation at a tertiary carbenium ion that is generated by alkene protonation. The possibility of two concurrent mechanisms is proposed on the basis of mechanistic experiments using a deuterated surrogate.

B(C6F5)3-catalyzed divergent cyanosilylations of chromones dependent on temperature

A B(C₆F₅)₃-catalyzed divergent cyanosilylation of chromones has been successfully realized. A variety of 4-oxochromane-2-carbonitriles were furnished as kinetic products in high yields via 1,4-cyanosilylations. An unexpected C-O bond cyanosilylation was achieved when the temperature was raised to 80 °C, affording 4-oxo-4-(2-hydroxylphenyl)but-2-enenitriles as thermodynamic products in 72-94% yields, which was confirmed by DFT results.

Photooxidative Generation of Dodecaborate-Based Weakly Coordinating Anions

Redox-active proanions of the type B₁₂(OCH₂Ar)₁₂ [Ar = C₆F₅ (1), 4-CF₃C₆H₄ (2), 3,5-(CF₃)₂C₆H₃ (3)] are introduced in the context of an experimental and computational study of the visible-light-initiated polymerization of a family of styrenes. Neutral, air-stable proanions 1-3 were found to initiate styrene polymerization through single-electron oxidation under blue-light irradiation, resulting in polymers with number-average molecular weights (M_n) ranging from ∼6 to 100 kDa. Shorter polymer products were observed in the majority of experiments, except in the case of monomers containing 4-X (X = F, Cl, Br) substituents on the styrene monomer when polymerized in the presence of 1 in CH₂Cl₂. Only under these specific conditions are longer polymers (>100 kDa) observed, strongly supporting the formulation that reaction conditions significantly modulate the degree of ion pairing between the dodecaborate anion and cationic chain end. This also suggests that 1-3 behave as weakly coordinating anions (WCA) upon one-electron reduction because no incorporation of the cluster-based photoinitiators is observed in the polymeric products analyzed. Overall, this work is a conceptual realization of a single reagent that can serve as a strong photooxidant, subsequently forming a WCA.

Superhalogens as Building Blocks of Super Lewis Acids

Lewis acids play an important role in synthetic chemistry. Using first-principle calculations on some newly designed molecules containing boron and organic heterocyclic superhalogen ligands, we show that the acid strength depends on the charge of the central atom as well as on the ligands attached to it. In particular, the strength of the Lewis acid increases with increasing electron withdrawing power of the ligand. With this insight, we highlight the importance of superhalogen-based ligands in the design of strong Lewis acids. Calculated fluoride ion affinity (FIA) values of B[C₂ BNO(CN)₃ ]₃ and B[C₂ BNS(CN)₃ ]₃ show that these are super Lewis acids.

Interaction of Metal Oxido Compounds with B(C6 F5 )3

Lewis acid-base pair chemistry has been placed on a new level with the discovery that adduct formation between an electron donor (Lewis base) and acceptor (Lewis acid) can be inhibited by the introduction of steric demand, thus preserving the reactivity of both Lewis centers, resulting in highly unusual chemistry. Some of these highly versatile frustrated Lewis pairs (FLP) are capable of splitting a variety of small molecules, such as dihydrogen, in a heterolytic and even catalytic manner. This is in sharp contrast to classical reactions where the inert substrate must be activated by a metal-based catalyst. Very recently, research has emerged combining the two concepts, namely the formation of FLPs in which a metal compound represents the Lewis base, allowing for novel chemistry by using the heterolytic splitting power of both together with the redox reactivity of the metal. Such reactivity is not restricted to the metal center itself being a Lewis acid or base, also ancillary ligands can be used as part of the Lewis pair, still with the benefit of the redox-active metal center nearby. This Minireview is designed to highlight the novel reactions arising from the combination of metal oxido transition-metal or rare-earth-metal compounds with the Lewis acid B(C₆ F₅ )₃ . It covers a wide area of chemistry including small molecule activation, hydrogenation and hydrosilylation catalysis, and olefin metathesis, substantiating the broad influence of the novel concept. Future goals of this young and exciting area are briefly discussed.