Diagnosis, classification, and frequency of C-shaped canals in mandibular second molars in the Lebanese population

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

External Validation of the Effect of the Combined Use of Object Detection for the Classification of the C-Shaped Canal Configuration of the Mandibular Second Molar in Panoramic Radiographs: A Multicenter Study

INTRODUCTION

The purposes of this study were to evaluate the effect of the combined use of object detection for the classification of the C-shaped canal anatomy of the mandibular second molar in panoramic radiographs and to perform an external validation on a multicenter dataset.

METHODS

The panoramic radiographs of 805 patients were collected from 4 institutes across two countries. The CBCT data of the same patients were used as "Ground-truth". Five datasets were generated: one for training and validation, and 4 as external validation datasets. Workflow 1 used manual cropping to prepare the image patches of mandibular second molars, and then classification was performed using EfficientNet. Workflow 2 used two combined methods with a preceding object detection (YOLOv7) performed for automated image patch formation, followed by classification using EfficientNet. Workflow 3 directly classified the root canal anatomy from the panoramic radiographs using the YOLOv7 prediction outcomes. The classification performance of the 3 workflows was evaluated and compared across 4 external validation datasets.

RESULTS

For Workflows 1, 2, and 3, the area under the receiver operating characteristic curve (AUC) values were 0.863, 0.861, and 0.876, respectively, for the AGU dataset; 0.935, 0.945, and 0.863, respectively, for the ASU dataset; 0.854, 0.857, and 0.849, respectively, for the ODU dataset; and 0.821, 0.797, and 0.831, respectively, for the ODU low-resolution dataset. No significant differences existed between the AUC values of Workflows 1, 2, and 3 across the 4 datasets.

CONCLUSIONS

The deep learning systems of the 3 workflows achieved significant accuracy in predicting the C-shaped canal in mandibular second molars across all test datasets.

Root and canal morphology of third molar teeth

Restorative and prosthetic considerations usually necessitates endodontic treatment of third molars in order to retain them as a functional component of the dental arch. However, the anatomy of third molars has been described as unpredictable. To date, there has been little published work on root and canal morphology of third molars, with an adequate sample size. The aim of this study was to investigate root and canal morphology of third molars. Maxillary and mandibular third molars were gathered from dental surgeries within north Jordan. Following access cavity preparation, pulp tissue was removed and root canals stained. Teeth were subject to examination after rendering them clear by immersion in methyl salicylate, and the following features evaluated: (1) number of roots; (2) number and type of root canals; (3) number and position of lateral canals; and (4) presence of inter-canal communications. Out of the examined 592 maxillary third molars, 69.9% had three roots, 10.81% had one, 9.79% had two, 9.12% had four, and 0.34% had five roots. Most had three (52.36%) and four canals (28.2%) with less frequency of two (11.48%), one (5.91%) and five canals (2.03%). Of the 639 mandibular third molars, 89.76% had two roots, 7.35% had three, 2.5% had one, and 0.47% had four roots. Most had three (55.71%) and two canals (29.42%) with less frequency of four (13.61%), one (1.09%) and five canals (0.15%). The majority of maxillary third molars had 3 roots, while the majority of mandibular third molars had two. Overall, nearly half of the maxillary and mandibular third molars had three canals. New canal configurations, not previously described in the literature nor included in Vertucci's classifications, were identified in both maxillary and mandibular third molars.

Comprehensive evaluation of root and root canal morphology of mandibular second molars in a Saudi subpopulation evaluated by cone-beam computed tomography

BACKGROUND

The study's goal was to use Cone Beam Computed Tomography (CBCT) to assess the root and root canal anatomy of mandibular second molars with C-shaped root canal configurations in residents of the Hail district. The impact of gender and side on the frequency of root canal morphology was considered.

METHODS

The sample size for this study was 304 untreated mandibular second molars with completely developed roots on the right and left sides. Using CBCT on the teeth, the root form and canal morphology for each root are based on Vertucci's classification. The occurrence of canals in the shape of a C. The prevalence and resemblance of the left and right sides or men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 304 mandibular second molars studied, 286 teeth had two roots (94.1%), whilst 13 (4.3%) were C-shaped root canal systems. 77 molars (25.3%) had two canal orifices, 219 (72.0%) had three canal orifices, and six (2.0%) and one (0.3%) had four and five root canal orifices, respectively. Type IV was the most common for mesial root, accounting for 57.7% of the sample (n = 176). For distal root, the most common occurrence was type I, which occurred 282 times (96.60%). The most prevalent root canal morphology was the presence of two canals in the mesial root and one canal in the distal root of teeth with two distinct roots (variant 3). (69.4%). The overall prevalence of C-shaped root canal systems is (4.3%) (n = 13).

CONCLUSIONS

The patient's race is an undeniable factor that influences root canal anatomy. The root canal morphology of mandibular second molars revealed significant differences between Saudi subpopulations. The majority of mandibular second molars had two roots and three root canals. When treating these molars, the presence of a C-shaped root canal system must be taken into account.

Observation of mandibular second molar roots and root canal morphology using dental cone-beam computed tomography

The mandibular second molars show various morphological features in the roots and root canal, and a gutter-shaped root (GSR) caused by fusion of the mesial and distal roots is frequently encountered. In this study the number of the roots associated with mandibular second molars were observed using dental cone-beam computed tomography (CBCT). For those with a GSR, determination of root morphology and root canal classification were performed. CBCT image data from 173 Japanese mandibular second molars were obtained. Using sliced images, the number of the roots and root morphology were determined. In cases with a GSR, the ratio for the fused roots was determined and root canal morphology features were classified. A GSR was found in 61 (35.3%), with greater prevalence in females. In addition, the overall ratio of the fused part to root thickness in those with a GSR was 48.7%, with no significant difference related to sex. Furthermore, a C-shaped root canal morphology was commonly observed in both males and females with a GSR. In the present cohort examined in Japanese, most of the mandibular second molar were found to have two roots, with a GSR noted in 35.5%. While a GSR was more often observed in females, a C-shaped root canal was the most common root canal morphology in both sexs. It is considered that assessment using CBCT findings is helpful for precise determination of root canal morphology and presence of a GSR in mandibular second molars.

The C-shaped Canal System in Mandibular Molars of a Saudi Arabian Population: Prevalence and Root Canal Configurations Using Cone-Beam Computed Tomography

OBJECTIVES

This retrospective study aimed to assess the prevalence of the C-shaped canal system in mandibular first and second molars in a Saudi Arabian population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

The sample included 300 CBCT images from adults aged 18 to 80 years (38.7 ± 17.9) (150 females and 150 males). All images were analyzed to detect the C-shaped root canal according to Fan's criteria. We also categorized our findings according to the gender and direction of the longitudinal groove. Data were reported as frequencies and percentages. The Chi-squared test was used to analyze proportional differences, with the significance level set at ≤0.05.

RESULTS

The C-shaped canals were observed in 146 mandibular first molars (24.33%) and 182 second molars (30.33%). Male patients had a significantly higher prevalence of C-shaped canals in mandibular second molars than females (P=0.003). The longitudinal groove was most typically detected on the root's lingual surface (53.35%).

CONCLUSION

The incidence of the C-shaped canal in a Saudi Arabian population was 27.33% in the mandibular molars. The longitudinal groove was mostly on the lingual surface. Males showed a higher prevalence of the C-shaped canal than females.

Prevalence of C-shaped canal and related variations in maxillary and mandibular second molars in the Indian Subpopulation: A cone-beam computed tomography analysis

Aim

The aim of this study was to evaluate the prevalence and anatomical configuration of the C-shaped canal in permanent maxillary and mandibular second molars in the Greater Noida population by compiling the results of data that used cone-beam computed tomography (CBCT) analysis.

Subjects and Methods

CBCT images were taken from the archive in the department of oral medicine and radiology taken for diagnostic purposes referred by other departments in the dental college. Five hundred CBCT records of patients, between the age group of 15-40 years, containing maxillary second molars and mandibular second molars were selected and reviewed.

Statistical Analysis

Statistical analysis was done using the Chi-square test to find out the most common configuration of the C-shaped canal between maxillary and mandibular second molars.

Results

Hundred and ten out of 500 patients had C-shaped canals (22%). Among them, 58 teeth (52.7%) were continuous C-shaped canals, 41 teeth (37.3%) were semicolon-shaped canals and 11 teeth (10%) had separated canals. (Chi-square test value = 8.26, P = 0.024). Statistically significant difference was found in configuration types. Among the jaw type, 62 maxillary second molar presented with C-shaped canal (25.1%) and 48 mandibular second molar presented with C-shaped canal (18.9%) (Chi-square test value = 3.87, P = 0.276). However, the difference was statistically insignificant in relation to the jaw type.

Conclusions

Within the limitation of the study, we can conclude that the overall prevalence of C-shaped canals was 22% and the most common C-shaped canal configuration type was continuous (52.7%). However, no statistically significant difference was found in relation to jaw type.

Effectiveness of antimicrobial photodynamic therapy as an adjunct to mechanical instrumentation in reducing counts of Enterococcus faecalis and Candida albicans from C-shaped root canals

BACKGROUND/PURPOSE

The aim was to assess the effectiveness of antimicrobial photodynamic therapy (aPDT) as an adjunct to mechanical instrumentation (MI) in reducing Enterococcus faecalis (E faecalis) and Candida albicans (C albicans) counts from C-shaped root-canals.

METHODS

Teeth with C-shaped canals as identified on cone beam computed tomographic images were included. Following incubation with E faecalis and C albicans, samples were divided into 4 groups a four follows: Group-1: MI with adjunct aPDT; Group-2: aPDT alone; Group-3: MI alone; and Group-4: no treatment. The pulp chambers of these teeth were exposed and coronal pulp was mechanically derided using sterile endodontic excavators. Using flexible files, all canals were debrided up to size #30 K-files with intermittent irrigation with 2.5% sodium hypochlorite irrigation. In Groups 1 and 3, methylene-blue was injected in all canals and aPDT was performed using a 600 nm diode laser. Sample-size estimation was done on data from a pilot investigation and group-comparisons were done using one way analysis of variance and Bonferroni post-hoc adjustment tests. P < .05 was considered statistically significant.

RESULTS

Sixty periodontally hopeless mandibular second molars with C-shaped canals were included. There was a statistically significant reduction CFU/mL of E faecalis (P < .001) and C albicans (P < .001). At post-operative microbial assessments in Group-1. There was no difference CFU/mL of E faecalis and C albicans at post-operative microbial assessments in Groups 2-4.

CONCLUSION

MI with adjunct aPDT is more effective in reducing count of E faecalis and C albicans from C-shaped root canals.

Assessment of root morphology and canal configuration of maxillary premolars in a Saudi subpopulation: a cone-beam computed tomographic study

BACKGROUND

The objective of this study was to use CBCT to look into the root canal morphology of maxillary premolars in a Saudi Arabian subpopulation and associate the results to existing canal morphology classifications.

METHODS

The sample size for this analysis was 500 right and left untreated maxillary first and second premolars with fully formed roots from 250 Saudi residents (125 male and 125 female). The following observations were made using CBCT on the teeth related: (1) The number and morphology of roots; (2) The canal morphology for each root according to Vertucci's classification. The frequency and similarities between the right and left sides, as well as between females and males, were studied. The Chi-square test was used to assess the results.

RESULTS

Of the 500 maxillary first premolars studied, 199 teeth had one root (39.8%), whilst 293 (58.6%) were two-rooted. Three-rooted maxillary first premolars were found in 8 (1.6%). For maxillary second premolars, 416 premolars had one root (83.2%), whilst 79 (15.8%) had two roots and the rest 5 (1.0%) were three roots. There were significant differences of number of root were found between groups (p > 0.05). For maxillary first premolar, Type IV was the most frequent, accounting for 57.8% of the sample (n = 289), followed by type II (32.8%, n = 164). For maxillary second premolar, Type I was mainly occurrence 302 (60.4%), followed by Type II (16.4%, n = 82).

CONCLUSIONS

The majority of maxillary first premolars had two roots and two root canals, while one root and one root canal was the most common anatomical configuration for maxillary second premolars. Additional canal forms do occur on occasion, and clinicians should pay close attention to them.

Effectiveness of various endodontic systems in treating teeth with C-shaped root canals

Introduction — C-shaped configuration is amongst the most complicated root canal varieties requiring additional effort for successful endodontic treatment. The goal of this study was the laboratory comparison of the endodontic treatment efficiencies via XP-endo vs. Gentlefile systems for the teeth with C-shaped root canals. Material and Methods — In laboratory settings, 36 teeth with established C-shaped configuration, extracted for medical reasons (24 mandibular premolars and 12 mandibular second molars), underwent the root canal treatment by XP-endo (XP) and Gentlefile (GF) systems. Treatment quality was evaluated on the basis of dye penetration tests and examination of root dentinal surface with a scanning electron microscope. The significance of differences between the groups was assessed via Mann-Whitney U test. Results — For GF instruments, the average size of stained area in the apical third of teeth was 3.33±2.73%, while in the coronal third it amounted to 13.49±13.58%. The results of using the XP instruments demonstrated the average size of stained area in the apical third equal to 15.45±12.48%, while in the coronal third it was 37.30±14.06%. The scanning electron microscopy revealed a rougher surface of dentin and the remnants of stained layer in root canals treated with GF system. Conclusion — Thus, XP instruments exhibited a better treatment quality compared with GF system. The obtained data may justify the choice of instruments for endodontic teeth treatment in case of an intricate root canal system.

Root and Canal Morphology of Mandibular Second Molars in a Yemeni Population: A Cone-beam Computed Tomography

Objective:

This study aimed to identify and characterize root and canal morphology and the prevalence of C-shaped canals of mandibular second molars (MSMs) in a Yemeni population using cone-beam computed tomography (CBCT).

Methods:

Three-dimensional digital images of 500 MSMs with mature roots were taken from 250 Yemeni individuals and analyzed for the following features: number of roots, shape and type of roots, type of canal configuration in each root, prevalence of C-shaped canal, and primary variations in the morphology of root and canal systems. Chi square and Fisher’s exact tests were employed for statistical analysis.

Results:

89.6% of MSMs had two separate roots, 9% had two fused roots, 0.6% had three separate roots and 0.8% had one root. Mesial root was mostly ribbon-shaped (60.5%) and distal root was mostly kidney-shaped (50.7%). Type II and Type I canal configurations were the most frequent in mesial (56.9%) and distal (91.3%) roots, respectively. C-shaped canals were found in 9%. Six variants were found with variant 3 being the most common (71%).

Conclusion:

Yemeni MSMs are mainly two-rooted. The prevalence of three- and one-rooted MSMs was relatively low. Various canals configurations were found in MSMs among this sample of Yemeni population. The clinicians should consider C-shaped roots and canals when treating Yemeni MSMs and should be aware of their morphological variations to ensure successful root canal treatment. Although bilateral similarity of many anatomical features of MSMs was found, individual evaluation of each MSM is necessary while performing endodontic treatment on both sides.

Deep-learning for predicting C-shaped canals in mandibular second molars on panoramic radiographs

OBJECTIVE

The aim of this study was to evaluate the use of a convolutional neural network (CNN) system for predicting C-shaped canals in mandibular second molars on panoramic radiographs.

METHODS

Panoramic and cone beam CT (CBCT) images obtained from June 2018 to May 2020 were screened and 1020 patients were selected. Our dataset of 2040 sound mandibular second molars comprised 887 C-shaped canals and 1153 non-C-shaped canals. To confirm the presence of a C-shaped canal, CBCT images were analyzed by a radiologist and set as the gold standard. A CNN-based deep-learning model for predicting C-shaped canals was built using Xception. The training and test sets were set to 80 to 20%, respectively. Diagnostic performance was evaluated using accuracy, sensitivity, specificity, and precision. Receiver-operating characteristics (ROC) curves were drawn, and the area under the curve (AUC) values were calculated. Further, gradient-weighted class activation maps (Grad-CAM) were generated to localize the anatomy that contributed to the predictions.

RESULTS

The accuracy, sensitivity, specificity, and precision of the CNN model were 95.1, 92.7, 97.0, and 95.9%, respectively. Grad-CAM analysis showed that the CNN model mainly identified root canal shapes converging into the apex to predict the C-shaped canals, while the root furcation was predominantly used for predicting the non-C-shaped canals.

CONCLUSIONS

The deep-learning system had significant accuracy in predicting C-shaped canals of mandibular second molars on panoramic radiographs.

Mandibular molar C-shaped root canals in 5th millennium BC China

OBJECTIVE

The aim of this study was to analyze the occurrence and variations in C-shaped canals in ancient Chinese teeth and compare the differences of these features between ancient and age-matched modern populations.

DESIGN

Approximately 5000-year-old craniofacial bone remains were collected from the fossils of 38 individuals (total: 68 mandibular second molars) excavated from the Jiaojia site. The control group comprised of an equal number of randomly selected modern samples. We used cone-beam computed tomography to scan the mandible along the apex-crown axis and analyzed the canal morphology, based on Fan's categorization criterion, at 2 mm, 5 mm, and 8 mm to the apical level. Grooves on the lingual and buccal sides were also recorded.

RESULTS

The proportion of C-shaped roots among ancient samples on the left and right sides were 48.57 % (17/35 teeth) and 54.55 % (18/33 teeth), respectively, and 51.47 % (35/68 teeth) in the total sample. Conversely, in the control group, 44.12 % (15/34) and 38.24 % (13/34) occurred on the left and right sides, respectively, and 41.18 % (28/68) in the total sample. Among the C-shaped canals from the Jiaojia site samples, the classification type changed between two adjacent levels in 84.31 % of samples. Approximately 35 (51.5 %) teeth had a fused root, 20 (29.41 %) had one shallow buccal and one deep lingual groove. The occurrence of C-shape variation was not significantly correlated with time (p＞0.05).

CONCLUSIONS

This study identified a high rate of C-shaped root canals among individuals of Jiaojia who lived approximately 5000 years ago.

Comparison of continuous wave and cold lateral condensation filling techniques in 3D printed simulated C-shape canals instrumented with Reciproc Blue or Hyflex EDM

Aim

To compare the efficiency of continuous wave obturation and cold lateral condensation techniques and filling time in C-shape canals of 3-dimensional (3D)-printed resin teeth shaped with Reciproc Blue (VDW) or Hyflex EDM (Coltene/Whaledent).

Methodology

One tooth with C1-type orifice and root canal morphology and one with C2-type orifice and C2-C3 root canal morphology were selected based on CBCT. Two replicas of selected teeth were manufactured with a 3D-printer and their canals were instrumented with Reciproc Blue or Hyflex EDM. These 4 instrumented replicas were scanned with CBCT. Identical 10 replicas of each group (total of 40) were produced using a 3D-printer and randomly divided into 2 groups (n = 5), root filled with either continuous wave obturation (CW) or cold lateral condensation (LC). Horizontal cross-sections of C1-type were made at 2, 4, 6, 8 mm and C2-type at 2, 4, 6 mm from the apical foramen. Gutta-percha, sealer and void areas were evaluated with image analysis sofware. Data were analysed using nonparametric Kruskal-Wallis and Mann Whitney-U tests and the Factorial ANOVA was used for interaction effects. Time required to fill canals was evaluated using the Mann-Whitney U test.

Results

For C1-type, LC had more gutta-percha and less sealer compared to CW in 2-mm sections (p<0.05). CW had greater percentages of gutta-percha and lower percentages of sealer compared with LC group in 4, 6, 8 mm sections and total area (p<0.05). LC group had higher percentages of voids compared to CW group in 2 and 4 mm sections (p<0.05). For C2-type, CW had more gutta-percha and less sealer versus LC group in all sections and total area (p<0.05). LC had the least gutta-percha and greatest sealer percentages at 6-mm sections (p<0.05). There was no statistically significant difference in the percentages of voids at any level of sections between the filling techniques (p>0.05). In both C-types, there was no significant difference in the percentages of gutta-percha, sealer and voids between Reciproc Blue and Hyflex EDM-shaped groups at any level (p>0.05). Time spent for the LC technique and filling C1-type was significantly longer than when using the CW technique and filling C2-type (p<0.05).

Conclusions

Continuous wave obturation was more effective than lateral condensation in both C1- and C2-type, except for the apical 2 mm section of C1-type, suggesting the need for a modified CW technique.

C-shaped canals in first and second mandibular molars from Brazilian individuals: A prevalence study using cone-beam computed tomography

Introduction

The study aimed to evaluate, through in vivo tomographic analysis, the prevalence of C-shaped canals in mandibular first and second molars of Brazilian individuals, analyzing its frequency by thirds of the roots, and in contralateral teeth.

Methods

Images of 801 mandibular molars (379 first molars and 422 second molars) from 334 Brazilian individuals (142 men and 192 women) were identified through 1544 cone beam computed tomography (CBCT) exams, obtained from a private oral radiologic clinic. The cross-sectional configurations were analyzed to determine the frequency of C-shaped canals at three different axial levels and classified in categories by three experienced endodontists independently.

Results

The incidence of C-shaped canals was 181 (23%). Considering the type of tooth, 91 (24.01%) were identified in the first molars, and 90 (21.32%) were found in the second molars. The incidence was significantly higher in female individuals (P < 0.05) for both first and second molars. The most common C-shaped canal configurations were: C1 (89.01% for first molars and 90% second molars), followed by C2 (8.79% for first molars and 6.66% for second molars) and C4 (2.19% for the first molars and 3.33% for the second molars). Bilateral C-shaped canals were significantly higher than unilateral for both first and second molars (P < 0.01).

Conclusions

The prevalence of C-shaped canals in mandibular molars of the Brazilian individuals was higher than previously reported for both mandibular first (24.01%) and second molars (21.32%). The incidence was significantly higher in female individuals and the coronal portion of the roots. The classic C-shaped format “C1” was the most frequent anatomical configuration. Furthermore, the prevalence of bilateral C-shaped canals was higher for the first molar (61.70%) and lower for the second molar (38.29%).

Racial predilection of C-shaped canal configuration in the mandibular second molar

Aim:

The purpose of this article is to determine the racial predilection of C-shaped canal configuration in a mandibular second molar.

Background:

Unusual root canal anatomy always poses a diagnostic and treatment challenge. Identification of such variation is important for the success of root canal treatment outcome. C-shaped canal configuration is such an aberrant morphology of molar teeth that vary in different population and is commonly seen in a mandibular second molar. Thus, knowledge of racial predilection of C-shaped canal configuration in different population for early diagnosis is obligatory.

Materials and Methods:

An exhaustive search was undertaken to identify published research articles related to C-shaped canal configuration in mandibular second molars. Forty-three research articles were analyzed which included 12,481 mandibular second molars. Chi-square test using value of P < 0.05 was performed to assess the statistical significance of this anomalous anatomic variation among the different population.

Results:

Statistical test revealed a significant variation between the Asian and nonAsian population. The highest incidence of racial predilection was observed in China (Asia) with 93.1%, and the minimum was observed in America with 2.7%.

Conclusion:

This research reported that racial predilection of C-shaped canal configuration in mandibular second molar varies significantly.

C-shaped root canals of mandibular second molars in a Korean population: a CBCT analysis

Objectives

The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population.

Materials and Methods

A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible.

Results

Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations.

Conclusions

There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

Prevalence of C-shaped canal system in mandibular first and second molars in a Saudi population assessed via cone beam computed tomography: a retrospective study

OBJECTIVES

The purpose of this study was to determine the prevalence of the C-shaped root canal configuration, location of the longitudinal groove, sex differences, and unilateral/bilateral presence in mandibular first and second molars in a Saudi population using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

CBCT images for the mandibular first and second molars of 487 patients (a total of 529 first molars and 681 s molars) were evaluated. The teeth were assessed for the presence of C-shaped root canals according to Fan criteria. Subdivisions were also made according to sex, direction of the longitudinal groove, and unilateral/bilateral presence.

RESULTS

Only one C-shaped mandibular first molar was observed (0.19%), whereas 62 second molars (9.1%) exhibited C-shaped anatomy. Unilateral presence of the C-shaped root canal system was more common (53.85%). Female patients had a higher prevalence than males. Longitudinal grooves were most commonly found on the root lingual surface (58.1%).

CONCLUSIONS

The prevalence of the C-shaped canal configuration in a Saudi Arabian population was 0.19% in the mandibular first molar and 9.1% in the mandibular second molar. Longitudinal groove prevalence was highest on the lingual surface. Women had a significantly higher prevalence of the C-shaped canal configuration than men. Patients with unilateral presence of the C-shaped canal configuration were more common than those with bilateral presence.

CLINICAL RELEVANCE

Tooth type, patient sex, and ethnicity can help clinicians predict the prevalence of the C-shaped canal system in mandibular molars.

Prevalence of C-shaped canals in mandibular second and third molars in a central India population: A cone beam computed tomography analysis

Introduction

To evaluate the prevalence of C-shaped root canals in mandibular molars using cone beam computed tomography (CBCT) in a subpopulation of Central India.

Materials and Methods

CBCT scans of patients from diagnostic imaging center were selected in accordance with the criteria given by Fan et al. (2004) for C-shaped canals. A total of 238 CBCT scans fulfilled the inclusion criteria and thereby divided into two groups: Group 1: Images showing C-shaped canal configuration in mandibular second molars. Group 2: Images showing C-shaped canal configuration in mandibular third molars. The frequency and distribution of canals and their configuration along with the position of lingual/buccal grooves in the images were evaluated, and the data was analyzed.

Results

CBCT evaluation showed that 9.7% of second molars and 8% of third molars had C-shaped canals. A prominent buccal groove was seen in these teeth. The data showed a significant difference (P = 0.038) for the presence of such anatomy on the right side for mandibular third molars.

Conclusion

The study showed a significant prevalence of C-shaped canal configuration in the subpopulation studied.

Differentiation of root canal morphology – a review of the literature

The morphological diversity of the inner anatomy of root canals in human permanent teeth is an issue mainly described in endodontics research. In recent years, it is a relatively new point in anthropological studies because it varies by sex, geographic and ethnic circumstances. An unusual number of root canals or their specific systems can differentiate populations around the world. The multiplicity of available methods for detecting root canal systems helps to better understand their complexity; however, most cannot be applied to anthropology due to limitations that occur in the bioarcheological material. Thorough knowledge of the heterogeneity and internal anatomy of the root canals supplies numerous classification systems proposed and improved over the years by many authors. A limited number of studies in the anthropological literature and future research will shed light onto the internal tooth morphology in historical populations. The aim of this paper is to describe various classification systems of root canals applied in endodontics. However, due to the often poor state of preservation and damage of archaeological derived remains, it seems that the best method is the approach that is the simplest and least complicated.

Radicular anatomy of permanent mandibular second molars in an Iranian population: A preliminary study

Background:

Root morphology is of utmost importance to endodontic sciences. Since there are a few studies on the morphology of mandibular second molars' roots, and some anatomical variables are not evaluated before, the aim of this study was to investigate thoroughly radicular anatomy of this tooth.

Materials and Methods:

This ex vivo study was performed on 150 intact mandibular second molars. After access cavity preparation and ensuring canal patency, Indian ink was injected into root canals from the orifices. The teeth became transparent using methyl salicylate storage. Then, they were inspected by an endodontist under a ×10 stereomicroscope regarding numerous root morphological variables. Data were analyzed using chi-square test and analysis of variance (α = 0.05).

Results:

About 86.7% of teeth had two roots and 13.3% were single-rooted (P = 0.0001), of which, 50% were C-shaped (6.7% of all teeth, P = 0.0001). 86.7% of mesial roots were double canalled, whereas 75.3% of distal roots were single canalled (P = 0.0001). 71.45% and 95.3% of the mesial and distal roots had one apical foramen, respectively (P = 0.0001). Apical foramens were mostly central followed by lingual in most cases. Distances between apical foramen and apical constriction ranged between 0.27 and 0.40 mm (P = 0.0545). Distances between apical foramen and root apices ranged between 0.30 and 0.47 mm (P = 0.0001). Vertucci classifications of mesial canals were Type II in 62.6% and Type IV in 37.4%. 86.2% of single-canal distal roots were Type I. 66.7% of double-canal distal roots were Type II and 33.3% were Type IV (P = 0.0001). The mean root lengths from cervical to apex of mesial, distal, and single roots were 14.02 ± 0.85 (95% confidence interval [CI] = 13.87–14.17), 13.35 ± 0.91 (95% CI = 13.19–13.50), and 14.25 ± 0.72 mm (95% CI = 13.91–14.58), respectively. The extents of canal curvatures varied between 20° and 31° buccolingually (P = 0.0000), and between 19° and 27° mesiodistally (P = 0.0000).

Conclusion:

There was a considerable rate of eccentric apical foramen in mandibular second molars.

Analysis of C-shaped root canal configuration in maxillary molars in a Korean population using cone-beam computed tomography

OBJECTIVES

The purpose of this study was to investigate the incidence of root fusion and C-shaped root canals in maxillary molars, and to classify the types of C-shaped canal by analyzing cone-beam computed tomography (CBCT) in a Korean population.

MATERIALS AND METHODS

Digitized CBCT images from 911 subjects were obtained in Chosun University Dental Hospital between February 2010 and July 2012 for orthodontic treatment. Among them, a total of selected 3,553 data of maxillary molars were analyzed retrospectively. Tomography sections in the axial, coronal, and sagittal planes were displayed by PiViewstar and Rapidia MPR software (Infinitt Co.). The incidence and types of root fusion and C-shaped root canals were evaluated and the incidence between the first and the second molar was compared using Chi-square test.

RESULTS

Root fusion was present in 3.2% of the first molars and 19.5% of the second molars, and fusion of mesiobuccal and palatal root was dominant. C-shaped root canals were present in 0.8% of the first molars and 2.7% of the second molars. The frequency of root fusion and C-shaped canal was significantly higher in the second molar than the first molar (p < 0.001).

CONCLUSIONS

In a Korean population, maxillary molars showed total 11.3% of root fusion and 1.8% of C-shaped root canals. Furthermore, root fusion and C-shaped root canals were seen more frequently in the maxillary second molars.

Endodontic treatment of a C-shaped mandibular second premolar with four root canals and three apical foramina: a case report

This case report describes a unique C-shaped mandibular second premolar with four canals and three apical foramina and its endodontic management with the aid of cone-beam computer tomography (CBCT). C-shaped root canal morphology with four canals was identified under a dental operating microscope. A CBCT scan was taken to evaluate the aberrant root canal anatomy and devise a better instrumentation strategy based on the anatomy. All canals were instrumented to have a 0.05 taper using 1.0 mm step-back filing with appropriate apical sizes determined from the CBCT scan images and filled using a warm vertical compaction technique. A C-shaped mandibular second premolar with multiple canals is an anatomically rare case for clinicians, yet its endodontic treatment may require a careful instrumentation strategy due to the difficulty in disinfecting the canals in the thin root area without compromising the root structure.

Endodontic management of C-shaped root canal system of mandibular first molar by using a modified technique of self-adjusting file system

AIM

C-shaped canal system is a seldom-found root canal anatomy which displays a challenge in all stages of endodontic treatment. According to the literature, this type of canal morphology is not a common finding in the mandibular first molar teeth.

BACKGROUND

This case report presents endodontic management of a mandibular first molar with a C-shaped canal system.

CASE REPORT

Root canal system was cleaned and shaped by nickel-titanium (NiTi) rotary instruments combined with self-adjusting file (SAF). Obturation was performed using warm, vertical condensation combined with the injection of warm gutta-percha. Follow-up examination 12 months later showed that the tooth was asymptomatic. The radiological findings presented no signs of periapical pathology.

CLINICAL SIGNIFICANCE

The clinician must be aware of the occurence and complexity of C-shaped canals in mandibular first molar teeth to perform a successful root canal treatment. The supplementary use of SAF after application of rotary instruments in C-shaped root canals might be a promising approach in endodontic treatment of this type of canal morphology.

The number of roots and canals in the maxillary second premolars in a group of jordanian population

Objectives. The aim of this study was to investigate the number of roots and root canals in the maxillary second premolar in a group of Jordanian population. Materials and Methods. A total of 217 patients, 100 female (46%) and 117 male (54%), received root canal treatment of maxillary second premolar from January 2012 to January 2014. The mean age of the patients was 32.7, ranging from 18 to 60 years. The teeth included in the study were examined clinically and radiographically for the number of roots and root canals using magnifying loupes. Results. Out of the total of 217 maxillary second premolars, 120 teeth had one root (55.3%), 96 teeth had two roots (44.2%), and one tooth had three roots (0.46%). Regarding root canal configuration, 30 teeth (13.8%) had one canal, 54 teeth (24.9%) had two canals shared in one apical foramen, 132 teeth (60.8%) had two canals with two separate apical foramina, and one tooth (0.46%) had three canals with separate apical foramina. Conclusion. The incidence of two canals (either with shared or separate apical foramina) is very high in the maxillary second premolars in Jordanian population; therefore inspection should be done for the presence of second canal whenever endodontic treatment is planned for this tooth.

Aetiology, incidence and morphology of the C-shaped root canal system and its impact on clinical endodontics

The C-shaped root canal constitutes an unusual root morphology that can be found primarily in mandibular second permanent molars. Due to the complexity of their structure, C-shaped root canal systems may complicate endodontic interventions. A thorough understanding of root canal morphology is therefore imperative for proper diagnosis and successful treatment. This review aims to summarize current knowledge regarding C-shaped roots and root canals, from basic morphology to advanced endodontic procedures. To this end, a systematic search was conducted using the MEDLINE, BIOSIS, Cochrane Library, EMBASE, Google Scholar, Web of Science, PLoS and BioMed Central databases, and many rarely cited articles were included. Furthermore, four interactive 3D models of extracted teeth are introduced that will allow for a better understanding of the complex C-shaped root canal morphology. In addition, the present publication includes an embedded best-practice video showing an exemplary root canal procedure on a tooth with a pronounced C-shaped root canal. The survey of this unusual structure concludes with a number of suggestions concerning future research efforts.

A rare occurrence of bilateral C-shaped roots in mandibular first and second premolars diagnosed with the aid of spiral computed tomography

The C-shaped canal system is an anatomical variation mostly seen in mandibular second molars, although it can also occur in maxillary and other mandibular molars. Such variation in the root canal anatomy is uncommon in mandibular first premolars and very rare in mandibular second premolars. The C-shaped canal is so named for the cross-sectional morphology of the root and root canal. The main anatomic feature of C-shaped canals is the presence of a fin or web connecting the individual root canals. Failure of the Hertwig’s epithelial root sheath to fuse on the lingual or buccal root surface is the main cause of C-shaped roots, which always contain a C-shaped canal. This case report describes an unusual occurrence of C-shaped roots in mandibular first and second premolars bilaterally, diagnosed with the aid of spiral computed tomography.

Key words:Canal configuration, C-shape, mandibular first premolar, mandibular second premolar, spiral computed tomography scans.

C-shaped root canal configuration: A review of literature

The aim is to review and discuss the etiology, incidence, anatomic features, classification, diagnosis and management of the C-shaped canal configuration. C-shaped canal configuration is a variation that has a racial predilection and is commonly seen in mandibular second molars. The intricacies present in this variation of canal morphology can pose a challenge to the clinician during negotiation, debridement and obturation. Manual and electronic searches of literature were performed from 1979 to 2012, in Pub Med by crossing the keywords: C-shaped canals, mandibular second molar, mandibular first premolar, root canal morphology. Knowledge of the C-shaped canal configuration is essential to achieve success in endodontic therapy. Radiographic and clinical diagnoses can aid in identification and negotiation of the fan-shaped areas and intricacies of the C-shaped anatomy. Effective management of this anomalous canal configuration can be achieved with rotary and hand instrumentation assisted with sonics and ultrasonics. Modifications in the obturation techniques will ensure a 3-dimensional fill of the canal system and chamber retained restorations like amalgam or composites, serve as satisfactory post endodontic restorations.

C-shaped maxillary permanent first molar: a case report and literature review

INTRODUCTION

The C-shaped configuration is rare in the upper first molar.The purpose of this article is to present 2 cases diagnosed during endodontic therapy and perform a literature review of this anatomy in the upper first molar.

METHODS

Endodontic therapy was performed by using a dental operating microscope and a cone-beam computed tomography analysis for better understanding of this anatomy. A literature search was conducted to identify and compare all the published cases of C-shaped upper first molar.

RESULTS

Before the cases reported in this article, only 5 cases were available in the published literature. Three different types of C-shaped configurations in the upper first molar have been presented.

CONCLUSIONS

The C-shaped maxillary first molar is a rare anatomic configuration. The use of the dental operating microscope may help in the endodontic therapy of these cases. Three types of C-shaped configurations have been reported; the fusion of the distobuccal root with the palatal root appears to be the most usual one.

Variable permanent mandibular first molar: Review of literature

Introduction:

The success of root canal therapy depends on the locations of all the canals, thourough debridement and proper sealing. At times the clinicians are challenged with variations in morphology of root canal. This review article attempts to list out all the variations of permanent mandibular first molar published so for in the literature.

Materials and Methods:

An exhaustive search was undertaken using PUBMED database to identify published literature from 1900 to 2010 relating to the root canal morphology of permanent first molar by using key words. The selected artcles were obtained and reviewed.

Results:

Total ninty seven articles were selected out of which 50 were original article and forty seven were case reports. The incidence of third canal in mesial root was 0.95% to 15%. The incidence of three rooted mandibular first molar was 3% to 33%. Only ninety cases reported with c-shape canal configuration. Incidence of Taurodintism without congenital disorder was very rare.

Conclusion:

The root canal treatment requires proper knowlegde of variations in root canal morphology in order to recognise, disinfect and seal all portal of exit. This can be accomplished with proper diagnosis using newer modes, modification in access preparation, use of operating microscope, enhanced methods of disinfecting and sealing of all canals.

Incidence of C-shaped root canal systems in mandibular second molars in the native Chinese population by analysis of clinical methods

The aims of the study were to investigate the incidence of C-shaped root canal systems in mandibular second molars in a native Chinese population using radiography and clinical examination under microscope and to compare the relative efficacies of these methods. For the recognition of C-shaped root canal system, 1 146 mandibular second molars were selected and examined. Teeth with C-shaped canal systems were categorized by using the radiographic classification criteria and the modified Melton's method. C-shaped canals were identified in 397 (34.64%) mandibular second molars by radiography (type I, 31.23% type II, 38.29% type III, 30.48%). Clinical examination showed that 449 (39.18%) cases exhibited C-shaped canal systems (C1, 22.94% C2, 48.11% C3a, 15.59% C3b, 13.36%). As for the result of the radiographic and clinical combined examination, C-shaped root canals were found in 473 (41.27%) mandibular second molars (C1, 21.78% C2, 45.67% C3a, 16.70% C3b, 15.86%). The incidence of C-shaped root canal diagnosed by radiographic method was statistically different from that by clinical examination and the combined examination (P<0.05). The study indicated a high incidence of C-shaped canal system in a Chinese population. The combination of microscopic and radiographic examination is an effective method in identifying the C-shaped root canal system.

A stereomicroscopy study of root apices of human maxillary central incisors and mandibular second premolars in an Iranian population

Mandibular second premolars and maxillary central incisors usually have one root, one canal, and one apical foramen. However, some studies have revealed anatomic variations in these teeth. The aim of the present study was to investigate such variations in canal configuration, foramina, lateral and accessory canals and apical deltas in the root apex of human maxillary central incisors and mandibular second premolars, using a clearing technique and stereomicroscopy. One hundred maxillary central incisors and 137 mandibular second premolars were collected, and India ink was injected into their canals. The teeth were then demineralized with 0.5 N nitric acid, cleared with methyl salicylate, and studied at x 5 and x 16 magnification. The incidence of one canal and one apical foramen was 100% for maxillary central incisors and 94.16% for mandibular second premolars. The main apical foramen was located in the center of the root apex in 21.89% and 17% of mandibular second premolars and maxillary central incisors, respectively. Lateral and accessory canals were found in 84.50% and 77.15% of maxillary central incisors and mandibular second premolars, respectively. Several foramina were found in 11% of maxillary central incisors and 24.08% of mandibular second premolars. Apical deltas were seen in 4.38% and 2% of mandibular second premolars and maxillary central incisors, respectively. The rate of anatomic variations in the apical part of the tooth, especially in posterior teeth, is thus considered to be high.

Root canal configuration and the prevalence of C-shaped canals in mandibular second molars in an Iranian population

A total of 139 extracted mandibular second molars were injected with India ink and demineralized. They were made clear and transparent with methyl salicylate, and the anatomy of their canals was studied. It was found that 86.3% of mandibular second molars had two roots, 9.3% had one root, and 4.3% had three roots. Ninety percent of the mesial roots of the mandibular second molars with two roots had two canals (predominantly with a type II or III configuration), and 77.5% of the distal roots of these teeth had one canal (predominantly with a type I configuration). Among the mandibular second molars, 7.2% had C-shaped canals and these configurations were seen mostly in single-rooted mandibular second molars. The results of this study indicate that mandibular second molar teeth have many variations in the number of roots and the morphology of their canals. Therefore it should not be assumed that all mandibular second molar teeth have two roots and three canals.