Metformin Hydrochloride

Pharmacological properties of Ensete glaucum seed extract: Novel insights for antidiabetic effects via modulation of oxidative stress, inflammation, apoptosis and MAPK signaling pathways

ETHNOPHAMACOLOGICAL RELEVANCE

Medicinal plants are increasingly making important contributions to diabetic treatment. Ensete glaucum seeds have been widely used in folk medicine to treat diabetes.

AIM OF THE STUDY

The study was aimed to investigate the protective effect and active mechanisms of E. glaucum seed extract (EGSE) against streptozotocin (STZ)-induced hyperglycemia.

MATERIALS AND METHODS

Hyperglycemic mice were treated with EGSE (25 and 50 mg/kg) or glibenclamide (5 mg/kg) once daily for 7 d. The effects of these treatments on changes in blood biochemical parameters, pancreatic, liver, and kidney histopathology, oxidative stress and inflammatory marker levels in pancreatic, hepatic, and renal tissues were assessed. Expression of several proteins in MAPK signaling pathway related to apoptosis in pancreatic tissue were investigated. Furthermore, ex vivo, in vitro, and in silico biological activities of EGSE and its compounds were also examined.

RESULTS

EGSE and glibenclamide increased notably insulin, reduced significantly glucose, AST, ALT, BUN and creatinine levels in blood. Pancreatic islets, hepatic and renal tissue structure were restored by EGSE or glibenclamide. EGSE showed significant anti-oxidative stress and anti-inflammatory effects by enhancing GSH level and dropping MDA, NF-κB, TNF-α and IL-6 levels in these tissues. Particularly, EGSE exhibited pancreatic protective effect against STZ-induced apoptosis through the MAPK signaling pathway by down-regulation of p-p38 MAPK, ERK1/2, JNK1, p-AMPK, Bax, Bax/Bcl-2, cytochrome c, cleaved-caspase 3 and PARP expression, and slight up-regulation of Bcl-2 expression. Moreover, EGSE inhibited intestinal glucose absorption, PTP1B, α-amylase, and α-glucosidase activities. Its isolated compounds (Afzelechin and coniferaldehyde) showed PTP1B and α-glucosidase inhibitory activities, and potent structure-activity relationships.

CONCLUSION

These findings indicated the hypoglycemic and protective effects of E. glaucum seed extract against the STZ diabetogenic action. E. glaucum seed is a potential candidate for further studies to confirm its activities as a therapeutic agent for diabetic patients.

Formulation and Evaluation of Xanthan Gum Microspheres for the Sustained Release of Metformin Hydrochloride

This work aimed to formulate xanthan gum microspheres for the encapsulation of metformin hydrochloride, according to the process of ionotropic gelation. The obtained microparticles, based on various fractions of xanthan gum (0.5-1.25), were subjected to different physico-chemical tests and a drug release study. Microspheres with an average size varying between 110.96 μm and 208.27 μm were obtained. Encapsulation efficiency reached 93.11% at a 1.25% biopolymer concentration. The swelling study showed a swelling rate reaching 29.8% in the gastric medium (pH 1.2) and 360% in the intestinal medium (pH 6.8). The drug release studies showed complete metformin hydrochloride release from the beads, especially those prepared from xanthan gum at the concentration of 1.25%, in intestinal medium at 90.00% after 6 h. However, limited and insignificant drug release was observed within the gastric medium (32.50%). The dissolution profiles showed sustained release kinetics.

Design and optimization of metformin hydrophobic ion pairs for efficient encapsulation in polymeric drug carriers

Loading small molecular weight hydrophilic drugs into polymeric carriers is a challenging task. Metformin hydrochloride (MET) is a highly soluble oral antidiabetic drug of small size and high cationic charge. Hydrophobic ion pairing (HIP) is an approach for reversible modulation of solubility and hydrophilicity of water-soluble drugs via complexation with oppositely charged molecules. Herein, we prepared MET ion pairs and carefully studied and characterized MET interaction with different ligands, with the aim of increasing MET lipophilicity and loading efficiency. HIP was successful using three hydrophilic anionic ligands; sodium dodecyl sulphate (SDS) Carbopol (CB) and tannic acid (TA). Electrostatic interaction and hydrogen bonding drove the complexation per spectroscopic and thermal studies. Complexation efficiency depended on ligand type and charge ratio. While complexes had varying interaction strengths, the excessive stability of TA/MET resulted in unfavorable poor MET dissociation. Notably, HIP imparted a 450 and tenfold lipophilicity increase for SDS/MET and CB/MET, respectively. The latter showed favorable controlled, yet complete release of MET at pH 6.8 and was loaded into alginate beads. Complex bulkiness and decreased lipophilicity resulted in a dramatic 88% increase of MET loading, demonstrating the success of HIP as a simple, efficient and applicable approach for modulating drug’s properties.

Synthesis, Characterization, and Intrinsic Dissolution Studies of Drug-Drug Eutectic Solid Forms of Metformin Hydrochloride and Thiazide Diuretics

The mechanochemical synthesis of drug–drug solid forms containing metformin hydrochloride (MET·HCl) and thiazide diuretics hydrochlorothiazide (HTZ) or chlorothiazide (CTZ) is reported. Characterization of these new systems indicates formation of binary eutectic conglomerates, i.e., drug–drug eutectic solids (DDESs). Further analysis by construction of binary diagrams (DSC screening) exhibited the characteristic V-shaped form indicating formation of DDESs in both cases. These new DDESs were further characterized by different techniques, including thermal analysis (DSC), solid state NMR spectroscopy (SSNMR), powder X-ray diffraction (PXRD) and scanning electron microscopy–energy dispersive X-ray spectroscopy analysis (SEM–EDS). In addition, intrinsic dissolution rate experiments and solubility assays were performed. In the case of MET·HCl-HTZ (χ_MET·HCl = 0.66), we observed a slight enhancement in the dissolution properties compared with pure HTZ (1.21-fold). The same analysis for the solid forms of MET·HCl-CTZ (χ_MET·HCl = 0.33 and 0.5) showed an enhancement in the dissolved amount of CTZ accompanied by a slight improvement in solubility. From these dissolution profiles and saturation solubility studies and by comparing the thermodynamic parameters (ΔH_fus and ΔS_fus) of the pure drugs with these new solid forms, it can be observed that there was a limited modification in these properties, not modifying the free energy of the solution (ΔG) and thus not allowing an improvement in the dissolution and solubility properties of these solid forms.

An Industrial Procedure for Pharmacodynamic Improvement of Metformin HCl via Granulation with Its Paracellular Pathway Enhancer Using Factorial Experimental Design

Background

Sorbitan monostearate is a surfactant used in the food industry. It was proved as a penetration enhancer to metformin HCl via a paracellular pathway. It is solid at room temperature and has a low melting point. Therefore, it was selected, as a granulating agent for metformin HCl.

Methods

Multi-level factorial design was applied to determine the optimized formula for industrial processing. The selected formulations were scanned using an electron microscope. Differential scanning calorimetry was used to ascertain the crystalline state of a drug. A modified non-everted sac technique, suggested by the authors, was used to evaluate the in vitro permeation enhancement of the drug. To simulate the emulsification effect of the bile salt, a tween 80 was added to the perfusion solution. As a pharmacodynamic marker, blood glucose levels were measured in diabetic rats.

Results

The results showed that drug permeability increases in the presence of tween 80. Drug permeability from granules increased than that of the pure drug or pure drug with tween 80. The prepared granules decreased blood glucose levels of diabetic rats than the pure drug and drug plus tween 80. There was an excellent correlation between the results of the drug permeation percent in vitro and the dropping of blood glucose level percent in vivo.

Conclusion

Improving the drug permeation and consequently, the drug pharmacodynamic effect in addition to an excellent micromeritics property of the prepared drug granules showed the dual enhancement effect of the suggested industrial procedure. Therefore, we suggest the same industrial procedure for other class III drugs.

Biguanides drugs: Past success stories and promising future for drug discovery

Biguanides have attracted much attention a century ago and showed resurgent interest in recent years after a long period of dormancy. They constitute an important class of therapeutic agents suitable for the treatment of a wide spectrum of diseases. Therapeutic indications of biguanides include antidiabetic, antimalarial, antiviral, antiplaque, and bactericidal applications. This review presents an extensive overview of the biological activity of biguanides and different mechanisms of action of currently marketed biguanide-containing drugs, as well as their pharmacological properties when applicable. We highlight the recent developments in research on biguanide compounds, with a primary focus on studies on metformin in the field of oncology. We aim to provide a critical overview of all main bioactive biguanide compounds and discuss future perspectives for the design of new drugs based on the biguanide fragment.

Comparison of the performance of two grades of metformin hydrochloride elaboration by means of the SeDeM system, compressibility, compactability, and process capability indices

Quality by design, applied to the development of a pharmaceutical drug, demands scientific methodologies, representing a source of information that will allow for a complete understanding the production process and the materials used for its manufacturing. Although the SeDeM system is a tool that enables a rational development of a product, result does not assure that an assessed material or mixture will be successful in terms of compression, hence, further research will be necessary on these features. The objective of this study was to assess and compare two grades of metformin hydrochloride elaboration: crystalline and direct compression using PXRD, the SeDeM expert system, the Heckel and Ryshkewitch-Duckworth models, as well as process control tools such as control charts and process capability indices to characterize and predict the performance of the materials in a direct compression process. The assessment identified that in spite of dealing with two different technical grades of a material with specific critical quality attributes for each one, PXRD analysis showed we dealt with the same crystalline structure, while the SeDeM system profiles obtained have very close values, and the main differences in materials were observed when subjecting them to conditions that simulate a compaction process with the Ryshkewitch-Duckworth model, in which a 46-times higher mechanical resistance was observed in the direct compression material compared with the crystalline one. The statistical control analysis revealed that only the direct compression material could be used to elaborate tablets whose weight variation was always maintained within the specification and control limits.

Metformin Hydrochloride and Sitagliptin Phosphate Fixed-Dose Combination Product Prepared Using Melt Granulation Continuous Processing Technology

The development of oral solid dosage forms, such as tablets that contain a high dose of drug(s), requires polymers and other additives to be incorporated at low levels as possible, to keep the final tablet weight low, and, correspondingly, the dosage form size small enough to be acceptable from a patient perspective. Additionally, a multi-step batch-based manufacturing process is usually required for production of solid dosage forms. This study presents the development and production, by twin-screw melt granulation technology, of a high-dose immediate-release fixed-dose combination (FDC) product of metformin hydrochloride (MET) and sitagliptin phosphate (SIT), with drug loads of 80% w/w and 6% w/w, respectively. For an 850/63 mg dose of MET/SIT, the final weight of the caplets was approximately 1063 mg compared with 1143 mg for the equivalent dose in Janumet®, the marketed product. Mixtures of the two drugs and polymers were melt-granulated at temperatures below the individual melting temperatures of MET and SIT (231.65 and 213.89°C, respectively) but above the glass transition temperature or melting temperature of the binder(s) used. By careful selection of binders, and processing conditions, direct compressed immediate-release caplets with desired product profiles were successfully produced. The melt granule formulations before compression showed good flow properties, were larger in particle size than individual starting API materials and were easily compressible. Melt granulation is a suitable platform for developing direct compressible high-dose immediate-release solid dosage forms of FDC products.

Paracellular Pathway Enhancement of Metformin Hydrochloride via Molecular Dispersion in Span 60 Microparticles

Surfactants are well known as permeation enhancers. Span 60 microparticles encapsulating different concentrations of metformin HCl were prepared by using rapid congeal melting technique. Electro-scanning microscope showed smooth surface but less round microparticles. The actual drug content was nearly equal in the different particle sizes of the microparticles. Differential scanning calorimetry results indicated the molecular distribution of the drug molecules with no evidence of drug thermal degradation. The drug release profile from the microparticles has, in each case, burst and there was incomplete drug release. The drug partition coefficient is markedly enhanced as a result of its molecular dispersion in Span 60, indicating the increasing of the drug lipophilicity as a result of its encapsulation in the polar part of the surfactant. Non-everted sac was used to study the drug permeability after solving its critical points. Compared to pure drug, the permeability profile of the drug increased from the Span 60-encapsulated drug, with a total permeation of 68% and drug absorption enhancement of 253%. The drug permeation enhancement mechanism was suggested to be molecular dispersion in the matrix, which is emulsified by Tween 80, and this leads to increasing the hydrophilic paracellular pathway of the drug. Considering the emulsification system of the GIT, which emulsifies the Span 60 instead of Tween 80, a huge improvement of the biopharmaceutics classification system class III permeability and consequently bioavailability could be expected. In addition, this study will open the door to the use of the same technique for enhancing the drug absorption mechanisms by the paracellular pathway for rapid and complete pharmacological effect.

Metformin hydrochloride and wound healing: from nanoformulation to pharmacological evaluation

Niosomes as drug delivery systems have the ability to decrease drugs' side effects and increase their therapeutic effectiveness. Metformin HCl is an oral antihyperglycemic agent belonging to biguanides. It is the most commonly chosen drug as a startup therapy for patients newly diagnosed with type 2 diabetes. This study aims to encapsulate metformin HCl inside niosomes to be used as a transdermal formulation helping to prolong its antidiabetic effect and investigate its ability to enhance wound healing in diabetic patients. Thin film hydration method was used to prepare metformin HCl niosomes using different proportions of Span 60, Span 40, Tween 80, and cholesterol. All formulations were characterized using transmission electron microscope, zeta potential, and vesicle size. In vitro release studies, stability studies and in vivo evaluation were conducted on selected niosomal formulations. The results of entrapment efficiency ranged from 13% to 32%. Vesicle sizes were determined in nano-range. The in vitro release profile of metformin HCl from niosomes occurred in two consecutive phases. Biological evaluation on diabetic rats revealed that metformin HCl niosomal gel given every 2 days showed a better sustained antidiabetic effect than oral doses given daily. It also showed an improvement in wound healing for diabetic rats given metformin formulations compared to nontreated ones.

Highly sensitive detection of an antidiabetic drug as illegal additives in health products using solvent microextraction combined with surface-enhanced Raman spectroscopy

The combined SME-SERS approach realized the effective separation and sensitive detection of illegal drug additives spiked in different healthy products.

Actions of metformin and statins on lipid and glucose metabolism and possible benefit of combination therapy

Patients with diabetes type 2 have an increased risk for cardiovascular disease and commonly use combination therapy consisting of the anti-diabetic drug metformin and a cholesterol-lowering statin. However, both drugs act on glucose and lipid metabolism which could lead to adverse effects when used in combination as compared to monotherapy. In this review, the proposed molecular mechanisms of action of statin and metformin therapy in patients with diabetes and dyslipidemia are critically assessed, and a hypothesis for mechanisms underlying interactions between these drugs in combination therapy is developed.

Hydrophilic Interaction Liquid Chromatography-Electrospray Ionization Mass Spectrometry for Therapeutic Drug Monitoring of Metformin and Rosuvastatin in Human Plasma

In this work a hydrophilic interaction liquid chromatography/positive ion electrospray mass spectrometric assay (HILIC/ESI-MS) has been developed and fully validated for the quantitation of metformin and rosuvastatin in human plasma. Sample preparation involved the use of 100 μL of human plasma, following protein precipitation and filtration. Metformin, rosuvastatin and 4-[2-(propylamino) ethyl] indoline 2 one hydrochloride (internal standard) were separated by using an X-Bridge-HILIC BEH analytical column (150.0 × 2.1 mm i.d., particle size 3.5 μm) with isocratic elution. A mobile phase consisting of 12% (v/v) 15 mM ammonium formate water solution in acetonitrile was used for the separation and pumped at a flow rate of 0.25 mL min⁻¹. The linear range of the assay was 100 to 5000 ng mL⁻¹ and 2 to 100 ng mL⁻¹ for metformin and rosuvastatin, respectively. The current HILIC-ESI/MS method allows for the accurate and precise quantitation of metformin and rosuvastatin in human plasma with a simple sample preparation and a short a chromatographic run time (less than 15 min). Plasma samples from eight patients were further analysed proving the capability of the proposed method to support a wide range of clinical studies.

Development of an Injectable Slow-Release Metformin Formulation and Evaluation of Its Potential Antitumor Effects

Metformin is an antidiabetic drug which possesses antiproliferative activity in cancer cells when administered at high doses, due to its unfavorable pharmacokinetics. The aim of this work was to develop a pharmacological tool for the release of metformin in proximity of the tumor, allowing high local concentrations, and to demonstrate the in vivo antitumor efficacy after a prolonged metformin exposition. A 1.2% w/w metformin thermoresponsive parenteral formulation based on poloxamers P407 and P124, injectable at room temperature and undergoing a sol-gel transition at body temperature, has been developed and optimized for rheological, thermal and release control properties; the formulation is easily scalable, and proved to be stable during a 1-month storage at 5 °C. Using NOD/SCID mice pseudo-orthotopically grafted with MDA-MB-231/luc⁺ human breast cancer cells, we report that multiple administrations of 100 mg of the optimized metformin formulation close to the tumor site cause tissue accumulation of the drug at levels significantly higher than those observed in plasma, and enough to exert antiproliferative and pro-apoptotic activities. Our results demonstrate that this formulation is endowed with good stability, tolerability, thermal and rheological properties, representing a novel tool to be pursued in further investigations for adjuvant cancer treatment.

Wetting effects versus ion pairs diffusivity: interactions of anionic surfactants with highly soluble cationic drugs and its impact on tablet dissolution

A study was conducted to develop a mechanistic understanding of dissolution of a highly soluble cationic drug, metformin hydrochloride, under the influence of anionic surfactants, sodium alkyl sulfates. The surfactants did not influence the saturated solubility of the drug, but reduced the surface tension of the dissolution media as the alkyl chain length increased. Their influence on tablet wetting based on the contact angles did not show any trend. The dissolution of 850 mg metformin hydrochloride tablets in 0.1 N HCl and pH 4.5 acetate buffer with 0.01% (w/v) sodium n-octyl sulfate (C8), sodium n-decyl sulfate (C10), or sodium n-tetradecyl sulfate (C14) was similar to the control, but was enhanced by sodium lauryl sulfate (C12). At 0.1% (w/v) concentration, the dissolution was not enhanced by C12 because the reduction in surface tension was counterbalanced by an increase in hydrophobic ion pairs that showed slower diffusivity by nuclear magnetic resonance. At 0.1% (w/v), metformin also formed an insoluble salt (1:2 molar ratios) with C10 (pH 1.2), C12, and C14 (pH 1.2 and 4.5) but not with C8. Three competing factors influenced the drug dissolution by surfactants: reduction in surface tension of the dissolution media, ion pairs with low diffusivity, and formation of an insoluble salt.

The synthesis and biodistribution of [(11)C]metformin as a PET probe to study hepatobiliary transport mediated by the multi-drug and toxin extrusion transporter 1 (MATE1) in vivo

In order to develop a new positron emission tomography (PET) probe to study hepatobiliary transport mediated by the multi-drug and toxin extrusion transporter 1 (MATE1), (11)C-labelled metformin was synthesized and then evaluated as a PET probe. [(11)C]Metformin ([(11)C]4) was synthesized in three steps, from [(11)C]methyl iodide. Evaluation by small animal PET of [(11)C]4 showed that there was increased concentrations of [(11)C]4 in the livers of mice pre-treated with pyrimethamine, a potential inhibitor of MATEs, inhibiting the hepatobiliary excretion of metformin. Radiometabolite analysis showed that [(11)C]4 was not degraded in vivo during the PET scan. Biodistribution studies were undertaken and the organ distributions were extrapolated into a standard human model. In conclusion, [(11)C]4 may be useful as a PET probe to non-invasively study the in vivo function of hepatobiliary transport and drug-drug interactions, mediated by MATE1 in future clinical investigations.

Biowaiver extension potential to BCS Class III high solubility-low permeability drugs: bridging evidence for metformin immediate-release tablet

The biopharmaceutics classification system (BCS) allows biowaiver for rapid dissolving immediate-release (IR) products of Class I drugs (high solubility and high permeability). The possibility of extending biowaivers to Class III high solubility and low permeability drugs is currently under scrutiny. In vivo bioequivalence data of different formulations of Class III drugs would support such an extension. The objective of this work was to demonstrate the bioequivalence of two marketed IR tablet products of a Class III drug, metformin hydrochloride, that are rapidly dissolving and have similar in vitro dissolution profiles. The effect of race on the systemic exposure of metformin was also explored. A randomized, open-label, two-period crossover study was conducted in 12 healthy Chinese male volunteers. Each subject received a single-dose of 500 mg of each product after an overnight fasting. The plasma concentrations of metformin were followed for 24 h. No significant formulation effect was found for the bioequivalence metrics: areas under concentration-time curve (AUC0-t, AUC0-infinity) and maximal concentration (Cmax). The 90% confidence intervals for the ratio of means were found within the acceptance range of 80-125% for the log-transformed data. Based on these results, it was concluded that the two IR products are bioequivalent. The pharmacokinetic parameters of metformin in Chinese for both products were similar and were in good agreement with those reported for metformin IR tablets in other ethnic populations. This study serves as an example for supporting biowaiver for BCS Class III drugs.

In vitro-in vivo correlation (IVIVC) models for metformin after administration of modified-release (MR) oral dosage forms to healthy human volunteers

The objective of the current study was to develop and evaluate the internal predictability for level C and A in vitro-in vivo correlation (IVIVC) models for prototype modified-release (MR) dosage forms of metformin. In vitro dissolution data for metformin were collected for 22 h using a USP II (paddle) method. In vivo plasma concentration data were obtained from 8 healthy volunteers after administration of immediate-release (IR) and MR dosage forms of metformin. Linear level C IVIVC models were developed using dissolution data at 2.0 and 4.0 h and in vitro mean dissolution time (MDT). A deconvolution-based level A model was attempted through a correlation of percent in vivo input obtained through deconvolution and percent in vitro dissolution obtained experimentally. Further, basic and extended convolution level A IVIVC models were attempted for metformin. Internal predictability for the IVIVC models was assessed by comparing observed and predicted values for C(max) and AUC(INF). The results suggest that highly predictive level C models with prediction errors (%PE) of <5% could be developed. Mean percent in vivo input for metformin was incomplete from all formulations and did not exceed 35% of dose. The deconvolution-based level A models for all MR formulations were curvilinear. However, a unique IVIVC model applicable to all MR formulations could not be developed using the deconvolution approach. The basic convolution level A model, which used in vitro dissolution as the in vivo input, had %PE values as high as 103%. Using an extended convolution approach, which modeled the absorption of metformin using a Hill function, a level A IVIVC model with %PE as low as 11% was developed. In conclusion, the current work indicates that level C and A IVIVC models with good internal predictability may be developed for a permeability- and absorption window-limited drug such as metformin.