Comparison of hydrolytic activity in water and heptane for thirty-two commercial lipase preparations

Combined Nanofibrous Face Mask: Co-Formulation of Lipases and Antibiotic Agent by Electrospinning Technique

The application of enzyme-based therapies has received significant attention in modern drug development. Lipases are one of the most versatile enzymes that can be used as therapeutic agents in basic skin care and medical treatment related to excessive sebum production, acne, and inflammation. The traditional formulations available for skin treatment, such as creams, ointments or gels, are widely applied; however, their use is not always accompanied by good drug penetration properties, stability, or patient adherence. Nanoformulated drugs offer the possibility of combining enzymatic and small molecule formulations, making them a new and exciting alternative in this field. In this study polymeric nanofibrous matrices made of polyvinylpyrrolidone and polylactic acid were developed, entrapping lipases from Candida rugosa and Rizomucor miehei and antibiotic compound nadifloxacin. The effect of the type of polymers and lipases were investigated, and the nanofiber formation process was optimized to provide a promising alternative in topical treatment. Our experiments have shown that entrapment by electrospinning induced two orders of magnitude increase in the specific enzyme activity of lipases. Permeability investigations indicated that all lipase-loaded nanofibrous masks were capable of delivering nadifloxacin to the human epidermis, confirming the viability of electrospinning as a formulation method for topical skin medications.

Characteristics of Crosslinking Polymers Play Major Roles in Improving the Stability and Catalytic Properties of Immobilized Thermomyces lanuginosus Lipase

This study aimed to improve the stability and catalytic properties of Thermomyces lanuginosus lipase (TLL) adsorbed on a hydrophobic support. At the optimized conditions (pH 5 and 25 °C without any additions), the Sips isotherm model effectively fitted the equilibrium adsorption data, indicating a monolayer and the homogenous distribution of immobilized lipase molecules. To preserve the high specific activity of adsorbed lipase, the immobilized lipase (IL) with a moderate loading amount (approximately 40% surface coverage) was selected. Polyethylenimine (PEI) and chitosan (CS) were successfully applied as bridging units to in situ crosslink the immobilized lipase molecules in IL. At the low polymer concentration (0.5%, w/w) and with 1 h incubation, insignificant changes in average pore size were detected. Short-chain PEI and CS (MW ≤ 2 kDa) efficiently improved the lipase stability, i.e., the lipase loss decreased from 40% to <2%. Notably, CS performed much better than PEI in maintaining lipase activity. IL crosslinked with CS-2 kDa showed a two- to three-fold higher rate when hydrolyzing p-nitrophenyl butyrate and a two-fold increase in the catalytic efficiency in the esterification of hexanoic acid with butanol. These in situ crosslinking strategies offer good potential for modulating the catalytic properties of TLL for a specific reaction.

Overview on immobilization of enzymes on synthetic polymeric nanofibers fabricated by electrospinning

The arrangement and type of support has a significant impact on the efficiency of immobilized enzymes. 1-dimensional fibrous materials can be one of the most desirable supports for enzyme immobilization. This is due to their high surface area to volume ratio, internal porosity, ease of handling, and high mechanical stability, all of which allow a higher enzyme loading, release and finally lead to better catalytic efficiency. Fortunately, the enzymes can reside inside individual nanofibers to remain encapsulated and retain their three-dimensional structure. These properties can protect the enzyme's tolerance against harsh conditions such as pH variations and high temperature, and this can probably enhance the enzyme's stability. This review article will discuss the immobilization of enzymes on synthetic polymers, which are fabricated into nanofibers by electrospinning. This technique is rapidly gaining popularity as one of the most practical ways to fibricate polymer, metal oxide, and composite micro or nanofibers. As a result, there is interest in using nanofibers to immobilize enzymes. Furthermore, present research on electrospun nanofibers for enzyme immobilization is primarily limited to the lab scale and industrial scale is still challanging. The primary future research objectives of this paper is to investigate the use of electrospun nanofibers for enzyme immobilization, which includes increasing yield to transfer biological products into commercial applications.

Industrial biotransformations catalyzed by microbial lipases: screening platform and commercial aspects

The successfulness of a lipase-catalyzed industrial process depends on a proper lipase selection. In this work, an alternative screening platform for industrially important biotransformations catalyzed by microbial lipases was proposed. Thus, the reactivity of sixty lipase activities from spore-forming microorganisms towards hydrolytic and transesterification reactions by using p-nitrophenyl palmitate as a chromogenic acyl donor substrate was explored. Only three biocatalysts were capable of catalyzing all reactions tested. Fourteen biocatalysts did not show hydrolytic activity at all; however, they displayed transesterification activities using ethanol, starch, low-methoxyl (LM) pectin, high-methoxyl (HM) pectin, or vitamin C as acyl acceptors. Using heat-treated biocatalysts, hydrolytic activities were not highly correlated with the corresponding transesterification activities using ethanol (r =  -0.058, p = 0.660), starch (r = 0.431, p = 0.001), LM pectin (r =  -0.010, p = 0.938), HM pectin (r = 0.167, p = 0.202), and vitamin C (r =  -0.048, p = 0.716) as acyl acceptor. In addition, to the best of our knowledge, several transesterification activities produced from microorganisms of the genus Bacillus, Brevibacillus, Lysinibacillus, Geobacillus, or Sporosarcina were reported for first time. Finally, the global lipase market was presented and segmented by date, application, geography and player highlighting the commercial contribution of microbial lipases.

Investigation of effect of ultrasound on immobilized C. rugosa lipase: Synthesis of biomass based furfuryl derivative and green metrics evaluation study

The present work deals with the synthesis of lab-made carboxymethyl cellulose (CMC) and chitosan (CHI) based co-polymer cross-linked with glutaraldehyde (GLU) which is used as immobilization matrix for the immobilization of Candida rugosa (CRL) lipase (CMC:CHI:GLU:CRL). This immobilized biocatalyst was subjected to characterization such as lipase-activity, kinetic-parameters, water-content, surface-texture, stability and half-life time etc. Effect of various ultrasound parameters (power, frequency, duty cycle, exposure time) on lipase activity is also tested which indicated that, developed biocatalyst has significant activity-stability and half-life-time in ultrasonicated medium. Further, this biocatalyst was applied to synthesize biomass-derived furfuryl derivative which offering excellent conversion of 99 % of bio-based furfuryl ester. The synthetic protocol is optimized in detail (with twelve reaction parameters) under ultrasonicated medium. Recyclability study offered 68 % conversion of the furfuryl ester after sixth reuse. Moreover, the developed protocol is well extended to synthesize various commercially important compounds. Besides this, we investigated thermodynamic parameters (ΔG*, ΔH*, ΔS*) which demonstrating more feasibility of biocatalytic synthesis in ultrasonicated medium than conventional medium. Finally, green metrics evaluation parameters (E-factor, carbon-efficiency and mass-intensity) are studied which indicating efficient synergetic role of immobilized CMC:CHI:GLU:CRL lipase biocatalysis and ultrasonication in green and sustainable synthesis.

Enhanced biodiesel production through phyco-myco co-cultivation of Chlorella minutissima and Aspergillus awamori: An integrated approach

Algae-fungus co-culture was investigated as an alternative biodiesel feedstock. An oleaginous filamentous fungus Aspergillus awamori was co-cultured with Chlorella minutissima MCC 27 and Chlorella minutissima UTEX 2219, respectively in N11 medium furnished with different carbon and nitrogen sources. The biomass and lipid production potential of the two C. minutissima-A. awamori co-cultures was compared against the monocultures. A substantial enhancement in biomass and lipid accumulation was observed in both the co-cultures. When supplemented with different carbon and nitrogen sources, glycerol and potassium nitrate were found to be the most effective. In the presence of glycerol, a 2.6-3.9-fold increase of biomass and 3.4-5.1-fold increase of total lipid yields were observed in the co-cultures as compared to the axenic monocultures. Furthermore, C16:0 (31.26-35.02%) and C18:1 (21.14-24.21%) fatty acids were the major composites of the co-culture oils, which suggest co-culture as a promising strategy for biodiesel production.

Synthesis of lipase nano-bio-conjugates as an efficient biocatalyst: characterization and activity–stability studies with potential biocatalytic applications

Synthesis of lipase nano-bio-conjugate and their detail biocatalytic application studies.

Enhanced catalytic activity of lipase encapsulated in PCL nanofibers

Use of biocatalysis for industrial synthetic chemistry is on the verge of significant growth. Enzyme immobilization as an effective strategy for improving the enzyme activity has emerged from developments especially in nanoscience and nanotechnology. Here, lipase from Burkholderia cepacia (LBC), as an example of the luxuriant enzymes, was successfully encapsulated in polycaprolactone (PCL) nanofibers, proven by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Evaluated in both organic and aqueous medium, the activation factor of the encapsulated enzymes in the hydrolysis reaction was generally higher than that in the transesterification reaction. Enhanced catalytic activities were found when 5-20 w/w % of LBC was loaded. The effect of different solvents pretreatment on the activity of immobilized LBC was also investigated. The highest activation factor was found up to 14 for the sample containing acetone-treated LBC/PCL (10 w/w %). The encapsulated lipase reserved 50% of its original activity after the 10th run in the transesterification reaction in hexane medium. The mechanism of activation of lipase catalytic ability based on active PCL nanofiberous matrix is proposed.

Concentration, partial characterization, and immobilization of lipase extract from P. brevicompactum by solid-state fermentation of babassu cake and castor bean cake

One relevant limitation hindering the industrial application of microbial lipases has been attributed to their production cost, which is determined by the production yield, enzyme stability among other. The objective of this work was to evaluate the concentration and immobilization of lipase extracts from Penicillium brevicompactum obtained by solid-state fermentation of babassu cake and castor bean cake. The precipitation with ammonium sulfate 60% of saturation of crude extract obtained with babassu cake as raw material showed an enhancement in hydrolytic and esterification activities from 31.82 to 227.57 U/g and from 170.92 to 207.40 U/g, respectively. Concentrated lipase extracts showed preference to medium-chain triglycerides and fatty acids. It is shown that the enzyme activity is maintained during storage at low temperatures (4 and -10°C) for up to 30 days. Higher esterification activities were achieved when the lipase extract was immobilized in sodium alginate and activated coal.

Mycelium-bound lipase production from Aspergillus niger MYA 135, and its potential applications for the transesterification of ethanol

The potential biotechnological applications of both constitutive and inducible lipase sources from Aspergillus niger MYA 135 were evaluated. To this end, the effect of environmental conditions on mycelium-bound lipase production from this strain was studied, when cultured either in the absence or presence of 2% olive oil. It was previously reported that mycelium-bound lipase from Aspergillus niger MYA 135 possess high stability in reaction mixtures containing ethanol; which could be especially important for their use in biodiesel synthesis. In this connection, the performance of the lipase sources produced in the transesterification of ethanol using p-nitrophenyl palmitate as acyl donor was also explored. Under our assay conditions, hydrolytic and synthetic activity of the mycelia produced in the absence or presence of olive oil were not highly correlated. While the hydrolytic activity was strongly increased by the addition of lipid to the culture medium, the best performance in the transesterification reactions of ethanol were associated with mycelia produced in absence of olive oil. Interestingly, the supplementation of the culture medium with Fe(+3) increased the transesterification activity by 71%, as compared to the activity previously reported for this strain. Therefore, the constitutive lipase sources from Aspergillus niger MYA 135 are considered to be promising for industrial biodiesel-fuel production.

Production of lipase from Pseudozyma aphidis and determination of the activity and stability of the crude lipase preparation in polar organic solvents

The production of lipase from Pseudozyma aphidis (DSM 70725) was determined in six different media. The highest lipase production was observed in a medium with glucose as the sole carbon source, and yeast extract and sodium nitrate as the nitrogen sources. The time course studies of growth and lipase production in the optimal medium revealed that the highest lipase production was achieved at the end of the log phase of growth, reaching the value of 35.0 U cm-3 in the fifth day of cultivation. The effects of various polar, water-miscible, organic solvents on the activity and stability of the crude lipase produced by P. aphidis were evaluated. The hydrolytic activity of the crude lipase towards p-nitrophenyl palmitate (p-NPP) in aqueous media and in organic solvents was determined, using the same spectrophotometric assay in both the aqueous and organic media. The crude lipase preparation exhibited activity towards p-NPP only in acetone and acetonitrile, while the lipase was stable only in acetone, with 23 % residual activity after 24 h of incubation. These results suggested that lipase from P. aphidis can be used as a biocatalyst for potential applications in such organic solvents.

Spherezymes: a novel structured self-immobilisation enzyme technology

BACKGROUND

Enzymes have found extensive and growing application in the field of chemical organic synthesis and resolution of chiral intermediates. In order to stabilise the enzymes and to facilitate their recovery and recycle, they are frequently immobilised. However, immobilisation onto solid supports greatly reduces the volumetric and specific activity of the biocatalysts. An alternative is to form self-immobilised enzyme particles.

RESULTS

Through addition of protein cross-linking agents to a water-in-oil emulsion of an aqueous enzyme solution, structured self-immobilised spherical enzyme particles of Pseudomonas fluorescens lipase were formed. The particles could be recovered from the emulsion, and activity in aqueous and organic solvents was successfully demonstrated. Preliminary data indicates that the lipase tended to collect at the interface.

CONCLUSION

The immobilised particles provide a number of advantages. The individual spherical particles had a diameter of between 0.5-10 mum, but tended to form aggregates with an average particle volume distribution of 100 mum. The size could be controlled through addition of surfactant and variations in protein concentration. The particles were robust enough to be recovered by centrifugation and filtration, and to be recycled for further reactions. They present lipase enzymes with the active sites selectively orientated towards the exterior of the particle. Co-immobilisation with other enzymes, or other proteins such as albumin, was also demonstrated. Moreover, higher activity for small ester molecules could be achieved by the immobilised enzyme particles than for free enzyme, presumably because the lipase conformation required for catalysis had been locked in place during immobilisation. The immobilised enzymes also demonstrated superior activity in organic solvent compared to the original free enzyme. This type of self-immobilised enzyme particle has been named spherezymes.

Catalytic properties of mycelium-bound lipases from Aspergillus niger MYA 135

A constitutive level of a mycelium-bound lipolytic activity from Aspergillus niger MYA 135 was strongly increased by 97% in medium supplemented with 2% olive oil. The constitutive lipase showed an optimal activity in the pH range of 3.0-6.5, while the mycelium-bound lipase activity produced in the presence of olive oil had two pH optima at pH 4 and 7. Interestingly, both lipolytic sources were cold-active showing high catalytic activities in the temperature range of 4-8 degrees C. These mycelium-bound lipase activities were also very stable in reaction mixtures containing methanol and ethanol. In fact, the constitutive lipase maintained almost 100% of its activity after exposure by 1 h at 37 degrees C in ethanol. A simple methodology to evaluate suitable transesterification activities in organic solvents was also reported.

Amperometric biosensor based on Prussian Blue-modified screen-printed electrode for lipase activity and triacylglycerol determination

Lipase activity against triacylglycerols has been measured using an amperometric enzyme biosensor based on glycerol dehydrogenase/NADH oxidase. A Prussian Blue modified screen-printed electrode was selected as substrate for the two immobilised-enzyme systems due to their higher operative stability reported in previous works. Various parameters such as cofactor (flavin mononucleotide FMN) concentration (1 mM), NAD+ coenzyme concentration (2 mM), pH effect (phosphate buffer pH 6 to 8, Tris buffer pH 8-10) response time and storage stability were evaluated and optimised. The glycerol biosensor was then investigated for lipase activity. The system was challenged against an olive or sunflower oil real samples in order to detect fatty acids and the results were compared with those provided either by the manufacture or reference methods with good agreement.

Understanding Candida rugosa lipases: an overview

Candida rugosa lipase (CRL) is one of the enzymes most frequently used in biotransformations. However, there are some irreproducibility problems inherent to this biocatalyst, attributed either to differences in lipase loading and isoenzymatic profile or to other medium-engineering effects (temperature, a(w), choice of solvent, etc.). In addition, some other properties (influence of substrate and reaction conditions on the lid movement, differences in the glycosylation degree, post-translational modifications) should not be ruled out. In the present paper the recent developments published in the CRL field are overviewed, focusing on: (a) comparison of structural and biochemical data among isoenzymes (Lip1-Lip5), and their influence in the biocatalytical performance; (b) developments in fermentation technology to achieve new crude C. rugosa lipases; (c) biocatalytical reactivity of each isoenzyme, and methods for characterising them in crude CRL; (d) state-of-the-art of new applications performed with recombinant CRLs, both in CRL-second generation (wild-type recombinant enzymes), as well as in CRL-third generation, (mutants of the wt-CRL).

Immobilization of Lipases on Different Carriers and Their Use in Synthesis of Pentyl Isovalerates

Porcine pancreatic lipase (PPL) and Candida cylindracea lipase (CCL) were immobilized on Celite and Amberlite IRA 938 by deposition from the aqueous solution by the addition of hexane. The influence of the immobilization on the activities of the immobilized lipase derivatives has been studied. The immobilized lipases were used in synthesis of pentyl isovalerates. Various reaction parameters affecting the synthesis of pentyl isovalerates were investigated. The reaction rates were compared with the rates of esterification with free lipases. The immobilized lipases were found to be very effective in the esterification reaction. The lipases immobilized on Celite 545 exhibited better operational stabilities than that of immobilized on Amberlite IRA-938.

The atypical lipase B from Candida antarctica is better adapted for organic media than the typical lipase from Thermomyces lanuginosa

Candida antarctica lipase B (CALB) and Thermomyces lanuginosa lipase (TLL) were evaluated as catalysts in different reaction media using hydrolysis of tributyrin as model reaction. In o/w emulsions, the enzymes were used in the free form and for use in monophasic organic media, the lipases were adsorbed on porous polypropylene (Accurel EP-100). In monophasic organic media, the highest specific activity of both lipases was obtained in pure tributyrin at a water activity of >0.5 and at an enzyme loading of 10 mg/g support. With tributyrin emulsified in water, the specific activities were 2780 micromol min(-1) mg(-1) for TLL and 535 micromol min(-1) mg(-1) for CALB. Under optimal conditions in pure tributyrin, CALB expressed 49% of the activity in emulsion (264 micromol min(-1) mg(-1)) while TLL expressed only 9.2% (256 micromol min(-1) mg(-1)) of its activity in emulsion. This large decrease is probably due to the structure of TLL, which is a typical lipase with a large lid domain. Conversion between open and closed conformers of TLL involves large internal movements and catalysis probably requires more protein mobility in TLL than in CALB, which does not have a typical lid region. Furthermore, TLL lost more activity than CALB when the water activity was reduced below 0.5, which could be due to further reduction in protein mobility.

Lipases as practical biocatalysts

Lipases are the most used enzymes in synthetic organic chemistry, catalyzing the hydrolysis of carboxylic acid esters in aqueous medium or the reverse reaction in organic solvents. Recent methodological advancements regarding practical factors affecting lipase activity and enantioselectivity are reviewed. Select practical examples concerning the use of lipases in the production of chiral intermediates are also highlighted.