δ-Integration of endo/exo-glucanase and β-glucosidase genes into the yeast chromosomes for direct conversion of cellulose to ethanol

Heterologous Expression of Plantaricin 423 and Mundticin ST4SA in Saccharomyces cerevisiae

Antimicrobial peptides or bacteriocins are excellent candidates for alternative antimicrobials, but high manufacturing costs limit their applications. Recombinant gene expression offers the potential to produce these peptides more cost-effectively at a larger scale. Saccharomyces cerevisiae is a popular host for recombinant protein production, but with limited success reported on antimicrobial peptides. Individual recombinant S. cerevisiae strains were constructed to secrete two class IIa bacteriocins, plantaricin 423 (PlaX) and mundticin ST4SA (MunX). The native and codon-optimised variants of the plaA and munST4SA genes were cloned into episomal expression vectors containing either the S. cerevisiae alpha mating factor (MFα1) or the Trichoderma reesei xylanase 2 (XYNSEC) secretion signal sequences. The recombinant peptides retained their activity and stability, with the MFα1 secretion signal superior to the XYNSEC secretion signal for both bacteriocins. An eight-fold increase in activity against Listeria monocytogenes was observed for MunX after codon optimisation, but not for PlaX-producing strains. After HPLC-purification, the codon-optimised genes yielded 20.9 mg/L of MunX and 18.4 mg/L of PlaX, which displayed minimum inhibitory concentrations (MICs) of 108.52 nM and 1.18 µM, respectively, against L. monocytogenes. The yields represent a marked improvement relative to an Escherichia coli expression system previously reported for PlaX and MunX. The results demonstrated that S. cerevisiae is a promising host for recombinant bacteriocin production that requires a simple purification process, but the efficacy is sensitive to codon usage and secretion signals.

Construction of an economical xylose-utilizing Saccharomyces cerevisiae and its ethanol fermentation

Traditional industrial Saccharomyces cerevisiae could not metabolize xylose due to the lack of a specific enzyme system for the reaction from xylose to xylulose. This study aims to metabolically remould industrial S. cerevisiae for the purpose of utilizing both glucose and xylose with high efficiency. Heterologous gene xylA from Piromyces and homologous genes related to xylose utilization were selected to construct expression cassettes and integrated into genome. The engineered strain was domesticated with industrial material under optimizing conditions subsequently to further improve xylose utilization rates. The resulting S. cerevisiae strain ABX0928-0630 exhibits a rapid growth rate and possesses near 100% xylose utilization efficiency to produce ethanol with industrial material. Pilot-scale fermentation indicated the predominant feature of ABX0928-0630 for industrial application, with ethanol yield of 0.48 g/g sugars after 48 hours and volumetric xylose consumption rate of 0.87 g/l/h during the first 24 hours. Transcriptome analysis during the modification and domestication process revealed a significant increase in the expression level of pathways associated with sugar metabolism and sugar sensing. Meanwhile, genes related to glycerol lipid metabolism exhibited a pattern of initial increase followed by a subsequent decrease, providing a valuable reference for the construction of efficient xylose-fermenting strains.

Enzymatic hydrolysis of single-use bioplastic items by improved recombinant yeast strains

Single-use bioplastic items pose new challenges for a circular plastics economy as they require different processing than petroleum-based plastics items. Microbial and enzymatic recycling approaches could address some of the pitfalls created by the influx of bioplastic waste. In this study, the recombinant expression of a cutinase-like-enzyme (CLE1) was improved in the yeast Saccharomyces cerevisiae to efficiently hydrolyse several commercial single-use bioplastic items constituting blends of poly(lactic acid), poly(1,4-butylene adipate-co-terephthalate), poly(butylene succinate) and mineral fillers. The hydrolysis process was optimised in controlled bioreactor configurations to deliver substantial monomer concentrations and, ultimately, 29 to 78% weight loss. Product inhibition studies and molecular docking provided insights into potential bottlenecks of the enzymatic hydrolysis process, while FT-IR analysis showed the preferential breakdown of specific polymers in blended commercial bioplastic items. This work constitutes a step towards implementing enzymatic hydrolysis as a circular economy approach for the valorisation of end-of-life single-use bioplastic items.

Engineering natural isolates of Saccharomyces cerevisiae for consolidated bioprocessing of cellulosic feedstocks

Saccharomyces cerevisiae has gained much attention as a potential host for cellulosic bioethanol production using consolidated bioprocessing (CBP) methodologies, due to its high-ethanol-producing titres, heterologous protein production capabilities, and tolerance to various industry-relevant stresses. Since the secretion levels of heterologous proteins are generally low in domesticated strains of S. cerevisiae, natural isolates may offer a more diverse genetic background for improved heterologous protein secretion, while also displaying greater robustness to process stresses. In this study, the potential of natural and industrial S. cerevisiae strains to secrete a core set of cellulases (CBH1, CBH2, EG2, and BGL1), encoded by genes integrated using CRISPR/Cas9 tools, was evaluated. High levels of heterologous protein production were associated with a reduced maximal growth rate and with slight changes in overall strain robustness, compared to the parental strains. The natural isolate derivatives YI13_BECC and YI59_BECC displayed superior secretion capacity for the heterologous cellulases at high incubation temperature and in the presence of acetic acid, respectively, compared to the reference industrial strain MH1000_BECC. These strains also exhibited multi-tolerance to several fermentation-associated and secretion stresses. Cultivation of the strains on crystalline cellulose in oxygen-limited conditions yielded ethanol concentrations in the range of 4-4.5 g/L, representing 35-40% of the theoretical maximum ethanol yield after 120 h, without the addition of exogenous enzymes. This study therefore highlights the potential of these natural isolates to be used as chassis organisms in CBP bioethanol production. KEY POINTS: • Process-related fermentation stresses influence heterologous protein production. • Transformants produced up to 4.5 g/L ethanol, ~ 40% of the theoretical yield in CBP. • CRISPR/Cas9 was feasible for integrating genes in natural S. cerevisiae isolates.

Engineered yeast for the efficient hydrolysis of polylactic acid

Polylactic acid (PLA) is a major contributor to the global bioplastic production capacity. However, post-consumer PLA waste is not fully degraded during non-optimal traditional organic waste treatment processes and can persist in nature for many years. Efficient enzymatic hydrolysis of PLA would contribute to cleaner, more energy-efficient, environmentally friendly waste management processes. However, high costs and a lack of effective enzyme producers curtail the large-scale application of such enzymatic systems. This study reports the recombinant expression of a fungal cutinase-like enzyme (CLE1) in the yeast Saccharomyces cerevisiae, which produced a crude supernatant that efficiently hydrolyses different types of PLA materials. The codon-optimised Y294[CLEns] strain delivered the best enzyme production and hydrolysis capabilities, releasing up to 9.44 g/L lactic acid from 10 g/L PLA films with more than 40% loss in film weight. This work highlights the potential of fungal hosts producing PLA hydrolases for future commercial applications in PLA recycling.

Supplementation of recombinant cellulases with LPMOs and CDHs improves consolidated bioprocessing of cellulose

The increased demand for energy has sparked a global search for renewable energy sources that could partly replace fossil fuel resources and help mitigate climate change. Cellulosic biomass is an ideal feedstock for renewable bioethanol production, but the process is not currently economically feasible due to the high cost of pretreatment and enzyme cocktails to release fermentable sugars. Lytic polysaccharide monooxygenases (LPMOs) and cellobiose dehydrogenases (CDHs) are auxiliary enzymes that can enhance cellulose hydrolysis. In this study, four LPMO and two CDH genes were subcloned and expressed in the Saccharomyces cerevisiae Y294 laboratory strain. SDS-PAGE analysis confirmed the extracellular production of the LPMOs and CDHs in the laboratory S. cerevisiae Y294 strain. A rudimentary cellulase cocktail (cellobiohydrolase 1 and 2, endoglucanase and β-glucosidase) was expressed in the commercial CelluX™ 4 strain and extracellular production of the individual cellulases was confirmed by SDS-PAGE analysis. In vitro cooperation of the CDHs and LPMOs with the rudimentary cellulases produced by strain CelluX™ 4[F4-1] was demonstrated on Whatman filter paper. The significant levels of soluble sugars released from this crystalline cellulose substrate indicated that these auxiliary enzymes could be important components of the CBP yeast cellulolytic system.

Promoter-proximal introns impact recombinant amylase expression in Saccharomyces cerevisiae

Consolidated bioprocessing (CBP) of starch requires recombinant Saccharomyces cerevisiae strains that produce raw starch-degrading enzymes and ferment the resultant sugars to ethanol in a single step. In this study, the native S. cerevisiae COX4 and RPS25A promoter-proximal introns were evaluated for enhanced expression of amylase genes (ateA, temA or temG_Opt) under the control of an S. cerevisiae promoter (ENO1P, TEF1P, TDH3P, or HXT7P). The results showed that different promoters and promoter-intron combinations differentially affected recombinant amylase production: ENO1P-COX4i and TDH3P-RPS25Ai were the best promoters for AteA, followed closely by HXT7P. The latter was also the best promoter for TemA and TemG production, followed closely by TDH3P-RPS25Ai for both these enzymes. Introducing promoter-proximal introns increased amylase activity up to 62% in Y294[ENO-COX-AteA] and Y294[TDH3-RPS-TemA], a significant improvement relative to the intron-less promoters. Strains co-expressing both an α-amylase and glucoamylase genes yielded up to 56 g/L ethanol from 20% w/v raw starch, with a higher carbon conversion observed with strains co-expressing TDH3P-RPS25Ai-temG_Opt than HXT7P-temG_Opt. The study showed that promoter-proximal introns can enhance amylase activity in S. cerevisiae and suggest that these alternative cassettes may also be considered for expression in more efficient ethanol-producing industrial yeast strains for raw starch CBP.

Natural Saccharomyces cerevisiae Strain Reveals Peculiar Genomic Traits for Starch-to-Bioethanol Production: the Design of an Amylolytic Consolidated Bioprocessing Yeast

Natural yeast with superior fermentative traits can serve as a platform for the development of recombinant strains that can be used to improve the sustainability of bioethanol production from starch. This process will benefit from a consolidated bioprocessing (CBP) approach where an engineered strain producing amylases directly converts starch into ethanol. The yeast Saccharomyces cerevisiae L20, previously selected as outperforming the benchmark yeast Ethanol Red, was here subjected to a comparative genomic investigation using a dataset of industrial S. cerevisiae strains. Along with Ethanol Red, strain L20 was then engineered for the expression of α-amylase amyA and glucoamylase glaA genes from Aspergillus tubingensis by employing two different approaches (delta integration and CRISPR/Cas9). A correlation between the number of integrated copies and the hydrolytic abilities of the recombinants was investigated. L20 demonstrated important traits for the construction of a proficient CBP yeast. Despite showing a close relatedness to commercial wine yeast and the benchmark Ethanol Red, a unique profile of gene copy number variations (CNVs) was found in L20, mainly encoding membrane transporters and secretion pathway proteins but also the fermentative metabolism. Moreover, the genome annotation disclosed seven open reading frames (ORFs) in L20 that are absent in the reference S288C genome. Genome engineering was successfully implemented for amylase production. However, with equal amylase gene copies, L20 proved its proficiency as a good enzyme secretor by exhibiting a markedly higher amylolytic activity than Ethanol Red, in compliance to the findings of the genomic exploration. The recombinant L20 dT8 exhibited the highest amylolytic activity and produced more than 4 g/L of ethanol from 2% starch in a CBP setting without the addition of supplementary enzymes. Based on the performance of this strain, an amylase/glucoamylase ratio of 1:2.5 was suggested as baseline for further improvement of the CBP ability. Overall, L20 showed important traits for the future construction of a proficient CBP yeast. As such, this work shows that natural S. cerevisiae strains can be used for the expression of foreign secreted enzymes, paving the way to strain improvement for the starch-to-bioethanol route.

Evaluating and engineering Saccharomyces cerevisiae promoters for increased amylase expression and bioethanol production from raw starch

Bioethanol production from starchy biomass via consolidated bioprocessing (CBP) will benefit from amylolytic Saccharomyces cerevisiae strains that produce high levels of recombinant amylases. This could be achieved by using strong promoters and modification thereof to improve gene expression under industrial conditions. This study evaluated eight endogenous S. cerevisiae promoters for the expression of a starch-hydrolysing α-amylase gene. A total of six of the native promoters were modified to contain a promoter-proximal intron directly downstream of the full-length promoter. Varying results were obtained; four native promoters outperformed the ENO1P benchmark under aerobic conditions and two promoters showed better expression under simulated CBP conditions. The addition of the RPS25A intron significantly improved the expression from most promoters, displaying increased transcript levels, protein concentrations and amylase activities. Raw starch-utilising strains were constructed through co-expression of selected α-amylase cassettes and a glucoamylase gene. The amylolytic strains displayed improved fermentation vigour on raw corn starch and broken rice, reaching 97% of the theoretical ethanol yield and converting 100% of the available carbon to products within 120 h in small-scale CBP fermentations on broken rice. This study showed that enhanced amylolytic strains for the conversion of raw starch to ethanol can be achieved through turnkey promoter selection and/or engineering.

Increasing the level of 4-vinylguaiacol in top-fermented wheat beer by secretory expression of ferulic acid decarboxylase from Bacillus pumilus in brewer's yeast

OBJECTIVE

The objective is to explore the effects of enhancing the activity of yeast ferulic acid decarboxylase (FDC1) on the level of 4-vinylguaiacol (4-VG) and the consumption of its precursor ferulic acid (FA) in top-fermented wheat beer.

RESULTS

Expression of Bacillus pumilus FDC1 in brewer's yeast showed a better effect on the FDC1 activity than overexpression of the endogenous enzyme. The 4-VG content was increased by 34%, and the consumption time of FA was shortened from 48 to 12 h. Since the intracellular accumulation of the FDC1 substrate did not increase over time, to reduce the FA transport burden on cells and shorten the decarboxylation time, B. pumilus FDC1 was further secreted extracellularly. The resulted strain showed a 65% increase in 4-VG content in the FA-containing medium, and produced about 3 mg L^-1 4-VG in the top-fermented wheat beer, increasing by 61% than control. However, further increasing the secretory expression level of FDC1 only accelerated FA consumption.

CONCLUSIONS

These results suggested that appropriate secretion of bacterial FDC1 into wort could be used as a potential alternative strategy to increase the level of 4-VG in top-fermented wheat beer.

Consolidated bioprocessing of raw starch with Saccharomyces cerevisiae strains expressing fungal alpha-amylase and glucoamylase combinations

Cost-effective consolidated bioprocessing (CBP) of raw starch for biofuel production requires recombinant Saccharomyces cerevisiae strains expressing α-amylases and glucoamylases. Native Aureobasidium pullulans apuA, Aspergillus terreus ateA, Cryptococcus sp. S-2 cryA and Saccharomycopsis fibuligera sfiA genes encoding raw-starch α-amylases were cloned and expressed in the S. cerevisiae Y294 laboratory strain. Recombinant S. cerevisiae Y294[ApuA] and Y294[AteA] strains produced the highest extracellular α-amylase activities (2.17 U mL-1 and 2.98 U mL-1, respectively). Both the ApuA and AteA α-amylases displayed a preference for pH 4 to 5 and retained more than 75% activity after 5 days at 30°C. When ateA was co-expressed with the previously reported Aspergillus. tubingensis glucoamylase gene (glaA), the amylolytic S. cerevisiae Y294[AteA-GlaA] strain produced 45.77 g L-1 ethanol after 6 days. Ethanol production by this strain was improved with the addition of either 2.83 μL STARGEN 002 (54.54 g L-1 ethanol and 70.44% carbon conversion) or 20 μL commercial glucoamylase from Sigma-Aldrich (73.80 g L-1 ethanol and 90.19% carbon conversion). This is the first report of an engineered yeast strain that can replace up to 90% of the enzymes required for raw starch hydrolysis, and thus contributes to the realisation of a CBP yeast for starch-based biofuel production.

Improved raw starch amylase production by Saccharomyces cerevisiae using codon optimisation strategies

Amylases are used in a variety of industries that have a specific need for alternative enzymes capable of hydrolysing raw starch. Five α-amylase and five glucoamylase-encoding genes were expressed in the Saccharomyces cerevisiae Y294 laboratory strain to select for recombinant strains that best hydrolysed raw corn starch. Gene variants of four amylases were designed using codon optimisation and different secretion signals. The significant difference in activity levels among the gene variants confirms that codon optimisation of fungal genes for expression in S. cerevisiae does not guarantee improved recombinant protein production. The codon-optimised glucoamylase variant from Talaromyces emersonii (temG_Opt) yielded 3.3-fold higher extracellular activity relative to the native temG, whereas the codon-optimised T. emersonii α-amylase (temA_Opt) yielded 1.6-fold more extracellular activity than the native temA. The effect of four terminator sequences was also investigated using temG and temG_Opt as reporter genes, with the ALY2T terminator resulting in a 14% increase in glucoamylase activity relative to the gene cassettes containing the ENO1T terminator. This is the first report of engineered S. cerevisiae strains to express T. emersonii amylase variants, and these enzymes may have potential applications in the industrial conversion of raw starch under fermentation conditions.

Engineering modular diterpene biosynthetic pathways in Physcomitrella patens

Modular assembly and heterologous expression in the moss Physcomitrella patens of pairs of diterpene synthases results in accumulation of modern land plant diterpenoids. Physcomitrella patens is a representative of the ancient bryophyte plant lineage with a genome size of 511 Mb, dominant haploid life cycle and limited chemical and metabolic complexity. For these plants, exceptional capacity for genome editing through homologous recombination is met with recently demonstrated in vivo assembly of multiple heterologous DNA fragments. These traits earlier made P. patens an attractive choice as a biotechnological chassis for photosynthesis-driven production of recombinant peptides. The lack of diterpene gibberellic acid phytohormones in P. patens combined with the recent targeted disruption of the single bifunctional diterpene synthase yielded lines devoid of endogenous diterpenoid metabolites and well-suited for engineering of terpenoid production. Here, we mimicked the modular nature of diterpene biosynthetic pathways found in modern land plants by developing a flexible pipeline to install three combinations of class II and class I diterpene synthases in P. patens to access industrially relevant diterpene biomaterials. In addition to a well-established neutral locus for targeted integration, we also explored loci created by a class of Long Terminal Repeat Retrotransposon present at moderate number in the genome of P. patens. Assembly of the pathways and production of the enzymes from the neutral locus led to accumulation of diterpenes matching the reported activities in the angiosperm sources. In contrast, insights gained with the retrotransposon loci indicate their suitability for targeting, but reveal potentially inherent complications which may require adaptation of the experimental design.

Construction of industrial Saccharomyces cerevisiae strains for the efficient consolidated bioprocessing of raw starch

BACKGROUND

Consolidated bioprocessing (CBP) combines enzyme production, saccharification and fermentation into a one-step process. This strategy represents a promising alternative for economic ethanol production from starchy biomass with the use of amylolytic industrial yeast strains.

RESULTS

Recombinant Saccharomyces cerevisiae Y294 laboratory strains simultaneously expressing an α-amylase and glucoamylase gene were screened to identify the best enzyme combination for raw starch hydrolysis. The codon optimised Talaromyces emersonii glucoamylase encoding gene (temG_Opt) and the native T. emersonii α-amylase encoding gene (temA) were selected for expression in two industrial S. cerevisiae yeast strains, namely Ethanol Red™ (hereafter referred to as the ER) and M2n. Two δ-integration gene cassettes were constructed to allow for the simultaneous multiple integrations of the temG_Opt and temA genes into the yeasts' genomes. During the fermentation of 200 g l^-1 raw corn starch, the amylolytic industrial strains were able to ferment raw corn starch to ethanol in a single step with high ethanol yields. After 192 h at 30 °C, the S. cerevisiae ER T12 and M2n T1 strains (containing integrated temA and temG_Opt gene cassettes) produced 89.35 and 98.13 g l^-1 ethanol, respectively, corresponding to estimated carbon conversions of 87 and 94%, respectively. The addition of a commercial granular starch enzyme cocktail in combination with the amylolytic yeast allowed for a 90% reduction in exogenous enzyme dosage, compared to the conventional simultaneous saccharification and fermentation (SSF) control experiment with the parental industrial host strains.

CONCLUSIONS

A novel amylolytic enzyme combination has been produced by two industrial S. cerevisiae strains. These recombinant strains represent potential drop-in CBP yeast substitutes for the existing conventional and raw starch fermentation processes.

Secretory overexpression of the endoglucanase by Saccharomyces cerevisiae via CRISPR-δ-integration and multiple promoter shuffling

Various recombinant proteins can be produced by the yeast Saccharomyces cerevisiae cell factories; therefore, efficient recombinant protein production techniques are desirable. In this study, to establish an efficient recombinant protein production technique in S. cerevisiae, the secretory production of recombinant protein endoglucanase II (TrEG) was tested. We developed 2 novel methods for TrEG production via clustered regularly interspaced short palindromic repeat (CRISPR) -δ-integration as well as multiple promoter shuffling, which involved the pre-breakdown of the δ-sequence by the CRISPR system and subsequent δ-integration as well as the conjugation of TrEG with various promoters and subsequent δ-integration, respectively. Moreover, simultaneous use of the CRISPR-δ-integration and multiple promoter shuffling methods was also examined. The CRISPR-δ-integration method was effective for improvement of the integrated TrEG copy number and its activity, and the multiple promoter shuffling method was also beneficial for enhancing the transcriptional level of TrEG and its activity. Furthermore, simultaneous use of CRISPR-δ-integration and multiple promoter shuffling methods was the most useful. The carboxymethyl cellulase activity of the TrEG expressing transformant YPH499/24CP constructed by the method reached 559 U/L, and it was 17.3-fold higher than that of the transformant constructed by the conventional YEp type vector. Overall, the simultaneous use of CRISPR-δ-integration and multiple promoter shuffling can be useful and easily applied for recombinant protein production.

Quantitative metabolomics of a xylose-utilizing Saccharomyces cerevisiae strain expressing the Bacteroides thetaiotaomicron xylose isomerase on glucose and xylose

The yeast Saccharomyces cerevisiae cannot utilize xylose, but the introduction of a xylose isomerase that functions well in yeast will help overcome the limitations of the fungal oxido-reductive pathway. In this study, a diploid S. cerevisiae S288c[2n YMX12] strain was constructed expressing the Bacteroides thetaiotaomicron xylA (XI) and the Scheffersomyces stipitis xyl3 (XK) and the changes in the metabolite pools monitored over time. Cultivation on xylose generally resulted in gradual changes in metabolite pool size over time, whereas more dramatic fluctuations were observed with cultivation on glucose due to the diauxic growth pattern. The low G6P and F1,6P levels observed with cultivation on xylose resulted in the incomplete activation of the Crabtree effect, whereas the high PEP levels is indicative of carbon starvation. The high UDP-D-glucose levels with cultivation on xylose indicated that the carbon was channeled toward biomass production. The adenylate and guanylate energy charges were tightly regulated by the cultures, while the catabolic and anabolic reduction charges fluctuated between metabolic states. This study helped elucidate the metabolite distribution that takes place under Crabtree-positive and Crabtree-negative conditions when cultivating S. cerevisiae on glucose and xylose, respectively.

Engineering a wild-type diploid Saccharomyces cerevisiae strain for second-generation bioethanol production

Background

The cost-effective production of second-generation bioethanol, which is made from lignocellulosic materials, has to face the following two problems: co-fermenting xylose with glucose and enhancing the strain’s tolerance to lignocellulosic inhibitors. Based on our previous study, the wild-type diploid Saccharomyces cerevisiae strain BSIF with robustness and good xylose metabolism genetic background was used as a chassis for constructing efficient xylose-fermenting industrial strains. The performance of the resulting strains in the fermentation of media with sugars and hydrolysates was investigated.

Results

The following two novel heterologous genes were integrated into the genome of the chassis cell: the mutant MGT05196^N360F, which encodes a xylose-specific, glucose-insensitive transporter and is derived from the Meyerozyma guilliermondii transporter gene MGT05196, and Ru-xylA (where Ru represents the rumen), which encodes a xylose isomerase (XI) with higher activity in S. cerevisiae. Additionally, endogenous modifications were also performed, including the overproduction of the xylulokinase Xks1p and the non-oxidative PPP (pentose phosphate pathway), and the inactivation of the aldose reductase Gre3p and the alkaline phosphatase Pho13p. These rationally designed genetic modifications, combined with alternating adaptive evolutions in xylose and SECS liquor (the leach liquor of steam-exploding corn stover), resulted in a final strain, LF1, with excellent xylose fermentation and enhanced inhibitor resistance. The specific xylose consumption rate of LF1 reached as high as 1.089 g g⁻¹ h⁻¹ with xylose as the sole carbon source. Moreover, its highly synchronized utilization of xylose and glucose was particularly significant; 77.6% of xylose was consumed along with glucose within 12 h, and the ethanol yield was 0.475 g g⁻¹, which is more than 93% of the theoretical yield. Additionally, LF1 performed well in fermentations with two different lignocellulosic hydrolysates.

Conclusion

The strain LF1 co-ferments glucose and xylose efficiently and synchronously. This result highlights the great potential of LF1 for the practical production of second-generation bioethanol.

Electronic supplementary material

The online version of this article (doi:10.1186/s40643-016-0126-4) contains supplementary material, which is available to authorized users.

Heterologous expression of cellulase genes in natural Saccharomyces cerevisiae strains

Enzyme cost is a major impediment to second-generation (2G) cellulosic ethanol production. One strategy to reduce enzyme cost is to engineer enzyme production capacity in a fermentative microorganism to enable consolidated bio-processing (CBP). Ideally, a strain with a high secretory phenotype, high fermentative capacity as well as an innate robustness to bioethanol-specific stressors, including tolerance to products formed during pre-treatment and fermentation of lignocellulosic substrates should be used. Saccharomyces cerevisiae is a robust fermentative yeast but has limitations as a potential CBP host, such as low heterologous protein secretion titers. In this study, we evaluated natural S. cerevisiae isolate strains for superior secretion activity and other industrially relevant characteristics needed during the process of lignocellulosic ethanol production. Individual cellulases namely Saccharomycopsis fibuligera Cel3A (β-glucosidase), Talaromyces emersonii Cel7A (cellobiohydrolase), and Trichoderma reesei Cel5A (endoglucanase) were utilized as reporter proteins. Natural strain YI13 was identified to have a high secretory phenotype, demonstrating a 3.7- and 3.5-fold higher Cel7A and Cel5A activity, respectively, compared to the reference strain S288c. YI13 also demonstrated other industrially relevant characteristics such as growth vigor, high ethanol titer, multi-tolerance to high temperatures (37 and 40 °C), ethanol (10 % w/v), and towards various concentrations of a cocktail of inhibitory compounds commonly found in lignocellulose hydrolysates. This study accentuates the value of natural S. cerevisiae isolate strains to serve as potential robust and highly productive chassis organisms for CBP strain development.

Engineering of Saccharomyces cerevisiae to utilize xylan as a sole carbohydrate source by co-expression of an endoxylanase, xylosidase and a bacterial xylose isomerase

Xylan represents a major component of lignocellulosic biomass, and its utilization by Saccharomyces cerevisiae is crucial for the cost effective production of ethanol from plant biomass. A recombinant xylan-degrading and xylose-assimilating Saccharomyces cerevisiae strain was engineered by co-expression of the xylanase (xyn2) of Trichoderma reesei, the xylosidase (xlnD) of Aspergillus niger, the Scheffersomyces stipitis xylulose kinase (xyl3) together with the codon-optimized xylose isomerase (xylA) from Bacteroides thetaiotaomicron. Under aerobic conditions, the recombinant strain displayed a complete respiratory mode, resulting in higher yeast biomass production and consequently higher enzyme production during growth on xylose as carbohydrate source. Under oxygen limitation, the strain produced ethanol from xylose at a maximum theoretical yield of ~90 %. This study is one of only a few that demonstrates the construction of a S. cerevisiae strain capable of growth on xylan as sole carbohydrate source by means of recombinant enzymes.

Expression and evaluation of enzymes required for the hydrolysis of galactomannan

The cost-effective production of bioethanol from lignocellulose requires the complete conversion of plant biomass, which contains up to 30 % mannan. To ensure utilisation of galactomannan during consolidated bioprocessing, heterologous production of mannan-degrading enzymes in fungal hosts was explored. The Aspergillus aculeatus endo-β-mannanase (Man1) and Talaromyces emersonii α-galactosidase (Agal) genes were expressed in Saccharomyces cerevisiae Y294, and the Aspergillus niger β-mannosidase (cMndA) and synthetic Cellvibrio mixtus β-mannosidase (Man5A) genes in A. niger. Maximum enzyme activity for Man1 (374 nkat ml(-1), pH 5.47), Agal (135 nkat ml(-1), pH 2.37), cMndA (12 nkat ml(-1), pH 3.40) and Man5A (8 nkat ml(-1), pH 3.40) was observed between 60 and 70 °C. Co-expression of the Man1 and Agal genes in S. cerevisiae Y294[Agal-Man1] reduced the extracellular activity relative to individual expression of the respective genes. However, the combined action of crude Man1, Agal and Man5A enzyme preparations significantly decreased the viscosity of galactomannan in locust bean gum, confirming hydrolysis thereof. Furthermore, when complemented with exogenous Man5A, S. cerevisiae Y294[Agal-Man1] produced 56 % of the theoretical ethanol yield, corresponding to a 66 % carbohydrate conversion, on 5 g l(-1) mannose and 10 g l(-1) locust bean gum.

Engineering of chromosomal wax ester synthase integrated Saccharomyces cerevisiae mutants for improved biosynthesis of fatty acid ethyl esters

In recent years, significant advances have been made to engineer robust microbes for overproducing biochemical products from renewable resources. These accomplishments have to a large extend been based on plasmid based methods. However, plasmid maintenance may cause a metabolic burden on the host cell and plasmid-based overexpression of genes can result in genetically unstable strains, which contributes to loss in productivity. Here, a chromosome engineering method based on delta integration was applied in Saccharomyces cerevisiae for the production of fatty acid ethyl esters (FAEEs), which can be directly used as biodiesel and would be a possible substitute for conventional petroleum-based diesel. An integration construct was designed and integrated into chromosomal delta sequences by repetitive transformation, which resulted in 1-6 copies of the integration construct per genome. The corresponding FAEE production increased up to 34 mg/L, which is an about sixfold increase compared to the equivalent plasmid-based producer. The integrated cassette in the yeast genome was stably maintained in nonselective medium after deletion of RAD52 which is essential for efficient homologous recombination. To obtain a further increase of FAEE production, genes encoding endogenous acyl-CoA binding protein (ACB1) and a bacterial NADP(+)-dependent glyceraldehyde-3-phosphate dehydrogenase (gapN) were overexpressed in the final integration strain, which resulted in another 40% percent increase in FAEE production. Our integration strategy enables easy engineering of strains with adjustable gene copy numbers integrated into the genome and this allows for an easy evaluation of the effect of the gene copy number on pathway flux. It therefore represents a valuable tool for introducing and expressing a heterologous pathway in yeast.

Raw starch conversion by Saccharomyces cerevisiae expressing Aspergillus tubingensis amylases

BACKGROUND

Starch is one of the most abundant organic polysaccharides available for the production of bio-ethanol as an alternative transport fuel. Cost-effective utilisation of starch requires consolidated bioprocessing (CBP) where a single microorganism can produce the enzymes required for hydrolysis of starch, and also convert the glucose monomers to ethanol.

RESULTS

The Aspergillus tubingensis T8.4 α-amylase (amyA) and glucoamylase (glaA) genes were cloned and expressed in the laboratory strain Saccharomyces cerevisiae Y294 and the semi-industrial strain, S. cerevisiae Mnuα1. The recombinant AmyA and GlaA displayed protein sizes of 110-150 kDa and 90 kDa, respectively, suggesting significant glycosylation in S. cerevisiae. The Mnuα1[AmyA-GlaA] and Y294[AmyA-GlaA] strains were able to utilise 20 g l-1 raw corn starch as sole carbohydrate source, with ethanol titers of 9.03 and 6.67 g l-1 (0.038 and 0.028 g l-1 h-1), respectively, after 10 days. With a substrate load of 200 g l-1 raw corn starch, Mnuα1[AmyA-GlaA] yielded 70.07 g l-1 ethanol (0.58 g l-1 h-1) after 120 h of fermentation, whereas Y294[AmyA-GlaA] was less efficient at 43.33 g l-1 ethanol (0.36 g l-1 h-1).

CONCLUSIONS

In a semi-industrial amylolytic S. cerevisiae strain expressing the A. tubingensis α-amylase and glucoamylase genes, 200 g l-1 raw starch was completely hydrolysed (saccharified) in 120 hours with 74% converted to released sugars plus fermentation products and the remainder presumably to biomass. The single-step conversion of raw starch represents significant progress towards the realisation of CBP without the need for any heat pretreatment. Furthermore, the amylases were produced and secreted by the host strain, thus circumventing the need for exogenous amylases.

Ethanol production from inulin and unsterilized meal of Jerusalem artichoke tubers by Saccharomyces sp. W0 expressing the endo-inulinase gene from Arthrobacter sp

After the endo-inulinase gene from Arthrobacter sp. was ligated the expression vectors pMIDSC31 and pMIRSC31, the endo-inulinase gene was inserted into the chromosomal DNA of Saccharomyces sp. W0. It was found that the inulinase activity of the recombinant yeast D5 in which the endo-inulinase gene was inserted into the delta sequence was higher than that of the recombinant yeast R1 in which the endo-inulinase gene was inserted into 18S rDNA sequence. More ethanol from inulin was produced by the recombinant yeast D5 than by the recombinant yeast R1. But Saccharomyces sp. W0 produced the lowest inulinase activity and concentration of ethanol. During the 3-l fermentation, the recombinant yeast D5 could produce 13.6 ml of ethanol per 100ml of the fermented medium from 30% inulin. The recombinant yeast D5 could actively convert the unsterilized meal of Jerusalem artichoke tubers, yielding 10.1 ml of ethanol per 100ml of the fermented medium.

Construction of an efficient xylose-fermenting diploid Saccharomyces cerevisiae strain through mating of two engineered haploid strains capable of xylose assimilation

Saccharomyces cerevisiae can be engineered for xylose fermentation through introduction of wild type or mutant genes (XYL1/XYL1 (R276H), XYL2, and XYL3) coding for xylose metabolic enzymes from Scheffersomyces stipitis. The resulting engineered strains, however, often yielded undesirable phenotypes such as slow xylose assimilation and xylitol accumulation. In this study, we performed the mating of two engineered strains that exhibit suboptimal xylose-fermenting phenotypes in order to develop an improved xylose-fermenting diploid strain. Specifically, we obtained two engineered haploid strains (YSX3 and SX3). The YSX3 strain consumed xylose rapidly and produced a lot of xylitol. On the contrary, the SX3 strain consumed xylose slowly with little xylitol production. After converting the mating type of SX3 from alpha to a, the resulting strain (SX3-2) was mated with YSX3 to construct a heterozygous diploid strain (KSM). The KSM strain assimilated xylose (0.25gxyloseh(-1)gcells(-1)) as fast as YSX3 and accumulated a small amount of xylitol (0.03ggxylose(-1)) as low as SX3, resulting in an improved ethanol yield (0.27ggxylose(-1)). We found that the improvement in xylose fermentation by the KSM strain was not because of heterozygosity or genome duplication but because of the complementation of the two xylose-metabolic pathways. This result suggested that mating of suboptimal haploid strains is a promising strategy to develop engineered yeast strains with improved xylose fermenting capability.

Codon-optimized glucoamylase sGAI of Aspergillus awamori improves starch utilization in an industrial yeast

The development of a yeast that converts raw starch to ethanol in one step (called consolidated bioprocessing) could yield large cost reductions in the bioethanol industry. The aim of this study was to develop an efficient amylolytic Saccharomyces cerevisiae strain suitable for industrial bioethanol production. A native and codon-optimized variant of the Aspergillus awamori glucoamylase gene were expressed in the S. cerevisiae Y294 laboratory strain. Codon optimization resulted to be effective and the synthetic sequence sGAI was then δ-integrated into a S. cerevisiae strain with promising industrial fermentative traits. The mitotically stable recombinant strains showed high enzymatic capabilities both on soluble and raw starch (2425 and 1140 nkat/g dry cell weight, respectively). On raw corn starch, the engineered yeasts exhibited improved fermentative performance with an ethanol yield of 0.42 (g/g), corresponding to 75 % of the theoretical maximum yield.

Introduction and expression of genes for metabolic engineering applications in Saccharomyces cerevisiae

Metabolic pathway engineering in the yeast Saccharomyces cerevisiae leads to improved production of a wide range of compounds, ranging from ethanol (from biomass) to natural products such as sesquiterpenes. The introduction of multienzyme pathways requires precise control over the level and timing of expression of the associated genes. Gene number and promoter strength/regulation are two critical control points, and multiple studies have focused on modulating these in yeast. This MiniReview focuses on methods for introducing genes and controlling their copy number and on the many promoters (both constitutive and inducible) that have been successfully employed. The advantages and disadvantages of the methods will be presented, and applications to pathway engineering will be highlighted.

High level secretion of cellobiohydrolases by Saccharomyces cerevisiae

BACKGROUND

The main technological impediment to widespread utilization of lignocellulose for the production of fuels and chemicals is the lack of low-cost technologies to overcome its recalcitrance. Organisms that hydrolyze lignocellulose and produce a valuable product such as ethanol at a high rate and titer could significantly reduce the costs of biomass conversion technologies, and will allow separate conversion steps to be combined in a consolidated bioprocess (CBP). Development of Saccharomyces cerevisiae for CBP requires the high level secretion of cellulases, particularly cellobiohydrolases.

RESULTS

We expressed various cellobiohydrolases to identify enzymes that were efficiently secreted by S. cerevisiae. For enhanced cellulose hydrolysis, we engineered bimodular derivatives of a well secreted enzyme that naturally lacks the carbohydrate-binding module, and constructed strains expressing combinations of cbh1 and cbh2 genes. Though there was significant variability in the enzyme levels produced, up to approximately 0.3 g/L CBH1 and approximately 1 g/L CBH2 could be produced in high cell density fermentations. Furthermore, we could show activation of the unfolded protein response as a result of cellobiohydrolase production. Finally, we report fermentation of microcrystalline cellulose (Avicel™) to ethanol by CBH-producing S. cerevisiae strains with the addition of beta-glucosidase.

CONCLUSIONS

Gene or protein specific features and compatibility with the host are important for efficient cellobiohydrolase secretion in yeast. The present work demonstrated that production of both CBH1 and CBH2 could be improved to levels where the barrier to CBH sufficiency in the hydrolysis of cellulose was overcome.

Xylitol does not inhibit xylose fermentation by engineered Saccharomyces cerevisiae expressing xylA as severely as it inhibits xylose isomerase reaction in vitro

Efficient fermentation of xylose, which is abundant in hydrolysates of lignocellulosic biomass, is essential for producing cellulosic biofuels economically. While heterologous expression of xylose isomerase in Saccharomyces cerevisiae has been proposed as a strategy to engineer this yeast for xylose fermentation, only a few xylose isomerase genes from fungi and bacteria have been functionally expressed in S. cerevisiae. We cloned two bacterial xylose isomerase genes from anaerobic bacteria (Bacteroides stercoris HJ-15 and Bifidobacterium longum MG1) and introduced them into S. cerevisiae. While the transformant with xylA from B. longum could not assimilate xylose, the transformant with xylA from B. stercoris was able to grow on xylose. This result suggests that the xylose isomerase (BsXI) from B. stercoris is functionally expressed in S. cerevisiae. The engineered S. cerevisiae strain with BsXI consumed xylose and produced ethanol with a good yield (0.31 g/g) under anaerobic conditions. Interestingly, significant amounts of xylitol (0.23 g xylitol/g xylose) were still accumulated during xylose fermentation even though the introduced BsXI might not cause redox imbalance. We investigated the potential inhibitory effects of the accumulated xylitol on xylose fermentation. Although xylitol inhibited in vitro BsXI activity significantly (K(I) = 5.1 ± 1.15 mM), only small decreases (less than 10%) in xylose consumption and ethanol production rates were observed when xylitol was added into the fermentation medium. These results suggest that xylitol accumulation does not inhibit xylose fermentation by engineered S. cerevisiae expressing xylA as severely as it inhibits the xylose isomerase reaction in vitro.

Direct ethanol production from cellulosic materials using a diploid strain of Saccharomyces cerevisiae with optimized cellulase expression

BACKGROUND

Hydrolysis of cellulose requires the action of the cellulolytic enzymes endoglucanase, cellobiohydrolase and β-glucosidase. The expression ratios and synergetic effects of these enzymes significantly influence the extent and specific rate of cellulose degradation. In this study, using our previously developed method to optimize cellulase-expression levels in yeast, we constructed a diploid Saccharomyces cerevisiae strain optimized for expression of cellulolytic enzymes, and attempted to improve the cellulose-degradation activity and enable direct ethanol production from rice straw, one of the most abundant sources of lignocellulosic biomass.

RESULTS

The engineered diploid strain, which contained multiple copies of three cellulase genes integrated into its genome, was precultured in molasses medium (381.4 mU/g wet cell), and displayed approximately six-fold higher phosphoric acid swollen cellulose (PASC) degradation activity than the parent haploid strain (63.5 mU/g wet cell). When used to ferment PASC, the diploid strain produced 7.6 g/l ethanol in 72 hours, with an ethanol yield that achieved 75% of the theoretical value, and also produced 7.5 g/l ethanol from pretreated rice straw in 72 hours.

CONCLUSIONS

We have developed diploid yeast strain optimized for expression of cellulolytic enzymes, which is capable of directly fermenting from cellulosic materials. Although this is a proof-of-concept study, it is to our knowledge, the first report of ethanol production from agricultural waste biomass using cellulolytic enzyme-expressing yeast without the addition of exogenous enzymes. Our results suggest that combining multigene expression optimization and diploidization in yeast is a promising approach for enhancing ethanol production from various types of lignocellulosic biomass.

Next-generation cellulosic ethanol technologies and their contribution to a sustainable Africa

The world is currently heavily dependent on oil, especially in the transport sector. However, rising oil prices, concern about environmental impact and supply instability are among the factors that have led to greater interest in renewable fuel and green chemistry alternatives. Lignocellulose is the only foreseeable renewable feedstock for sustainable production of transport fuels. The main technological impediment to more widespread utilization of lignocellulose for production of fuels and chemicals in the past has been the lack of low-cost technologies to overcome the recalcitrance of its structure. Both biological and thermochemical second-generation conversion technologies are currently coming online for the commercial production of cellulosic ethanol concomitantly with heat and electricity production. The latest advances in biological conversion of lignocellulosics to ethanol with a focus on consolidated bioprocessing are highlighted. Furthermore, integration of cellulosic ethanol production into existing bio-based industries also using thermochemical processes to optimize energy balances is discussed. Biofuels have played a pivotal yet suboptimal role in supplementing Africa's energy requirements in the past. Capitalizing on sub-Saharan Africa's total biomass potential and using second-generation technologies merit a fresh look at the potential role of bioethanol production towards developing a sustainable Africa while addressing food security, human needs and local wealth creation.

Biotechnological potential of inulin for bioprocesses

Inulin consists of linear chains of β-2,1-linked D-fructofuranose molecules terminated by a glucose residue through a sucrose-type linkage at the reducing end. In this review article, inulin and its applications in bioprocesses are overviewed. The tubers of many plants, such as Jerusalem artichoke, chicory, dahlia, and yacon contain a large amount of inulin. Inulin can be actively hydrolyzed by microbial inulinases to produce fructose, glucose and inulooligosaccharides (IOS). The fructose and glucose formed can be further transformed into ethanol, single-cell protein, single cell oil and other useful products by different microorganisms. IOS formed have many functions. Therefore, inulin can be widely used in food, feed, pharmaceutical, chemical and biofuels industries.

Surface display of a functional minicellulosome by intracellular complementation using a synthetic yeast consortium and its application to cellulose hydrolysis and ethanol production

In this paper, we report the surface assembly of a functional minicellulosome by using a synthetic yeast consortium. The basic design of the consortium consisted of four different engineered yeast strains capable of either displaying a trifunctional scaffoldin, Scaf-ctf (SC), carrying three divergent cohesin domains from Clostridium thermocellum (t), Clostridium cellulolyticum (c), and Ruminococcus flavefaciens (f), or secreting one of the three corresponding dockerin-tagged cellulases (endoglucanase [AT], exoglucanase [EC/CB], or β-glucosidase [BF]). The secreted cellulases were docked onto the displayed Scaf-ctf in a highly organized manner based on the specific interaction of the three cohesin-dockerin pairs employed, resulting in the assembly of a functional minicellulosome on the yeast surface. By exploiting the modular nature of each population to provide a unique building block for the minicellulosome structure, the overall cellulosome assembly, cellulose hydrolysis, and ethanol production were easily fine-tuned by adjusting the ratio of different populations in the consortium. The optimized consortium consisted of a SC:AT:CB:BF ratio of 7:2:4:2 and produced almost twice the level of ethanol (1.87 g/liter) as a consortium with an equal ratio of the different populations. The final ethanol yield of 0.475 g of ethanol/g of cellulose consumed also corresponded to 93% of the theoretical value. This result confirms the use of a synthetic biology approach for the synergistic saccharification and fermentation of cellulose to ethanol by using a yeast consortium displaying a functional minicellulosome.

Gene copy number and polyploidy on products formation in yeast

Yeast, such as Saccharomyces cerevisiae or Kluyveromyces lactis is appropriate strain for ethanol production or some useful compounds production. Cellulases expressing yeast can ferment ethanol from cellulosic materials; however, the productivity should be increase more and more. To improve and engineer the productivity, the target gene(s) were introduced into yeast genome. Generally, using genetic engineering, increasing integrated gene numbers are increased, the expressed protein ability such as enzymatic activities are also increased. In this mini-review, we focused on the effect of integrated gene copy number and the polyploidy on the productivity such as enzymatic activity and/or product yield.

Ethanol production from cellulosic materials using cellulase-expressing yeast

We demonstrate direct ethanol fermentation from amorphous cellulose using cellulase-co-expressing yeast. Endoglucanases (EG) and cellobiohydrolases (CBH) from Trichoderma reesei, and beta-glucosidases (BGL) from Aspergillus aculeatus were integrated into genomes of the yeast strain Saccharomyces cerevisiae MT8-1. BGL was displayed on the yeast cell surface and both EG and CBH were secreted or displayed on the cell surface. All enzymes were successfully expressed on the cell surface or in culture supernatants in their active forms, and cellulose degradation was increased 3- to 5-fold by co-expressing EG and CBH. Direct ethanol fermentation from 10 g/L phosphoric acid swollen cellulose (PASC) was also carried out using EG-, CBH-, and BGL-co-expressing yeast. The ethanol yield was 2.1 g/L for EG-, CBH-, and BGL-displaying yeast, which was higher than that of EG- and CBH-secreting yeast (1.6 g/L ethanol). Our results show that cell surface display is more suitable for direct ethanol fermentation from cellulose.

Functional assembly of minicellulosomes on the Saccharomyces cerevisiae cell surface for cellulose hydrolysis and ethanol production

We demonstrated the functional display of a miniscaffoldin on the Saccharomyces cerevisiae cell surface consisting of three divergent cohesin domains from Clostridium thermocellum (t), Clostridium cellulolyticum (c), and Ruminococcus flavefaciens (f). Incubation with Escherichia coli lysates containing an endoglucanase (CelA) fused with a dockerin domain from C. thermocellum (At), an exoglucanase (CelE) from C. cellulolyticum fused with a dockerin domain from the same species (Ec), and an endoglucanase (CelG) from C. cellulolyticum fused with a dockerin domain from R. flavefaciens (Gf) resulted in the assembly of a functional minicellulosome on the yeast cell surface. The displayed minicellulosome retained the synergistic effect for cellulose hydrolysis. When a beta-glucosidase (BglA) from C. thermocellum tagged with the dockerin from R. flavefaciens was used in place of Gf, cells displaying the new minicellulosome exhibited significantly enhanced glucose liberation and produced ethanol directly from phosphoric acid-swollen cellulose. The final ethanol concentration of 3.5 g/liter was 2.6-fold higher than that obtained by using the same amounts of added purified cellulases. The overall yield was 0.49 g of ethanol produced per g of carbohydrate consumed, which corresponds to 95% of the theoretical value. This result confirms that simultaneous and synergistic saccharification and fermentation of cellulose to ethanol can be efficiently accomplished with a yeast strain displaying a functional minicellulosome containing all three required cellulolytic enzymes.

Synthetic biology and biomass conversion: a match made in heaven?

To move our economy onto a sustainable basis, it is essential that we find a replacement for fossil carbon as a source of liquid fuels and chemical industry feedstocks. Lignocellulosic biomass, available in enormous quantities, is the only feasible replacement. Many micro-organisms are capable of rapid and efficient degradation of biomass, employing a battery of specialized enzymes, but do not produce useful products. Attempts to transfer biomass-degrading capability to industrially useful organisms by heterologous expression of one or a few biomass-degrading enzymes have met with limited success. It seems probable that an effective biomass-degradation system requires the synergistic action of a large number of enzymes, the individual and collective actions of which are poorly understood. By offering the ability to combine any number of transgenes in a modular, combinatorial way, synthetic biology offers a new approach to elucidating the synergistic action of combinations of biomass-degrading enzymes in vivo and may ultimately lead to a transferable biomass-degradation system. Also, synthetic biology offers the potential for assembly of novel product-formation pathways, as well as mechanisms for increased solvent tolerance. Thus, synthetic biology may finally lead to cheap and effective processes for conversion of biomass to useful products.

Simultaneous degradation of phytic acid and starch by an industrial strain of Saccharomyces cerevisiae producing phytase and alpha-amylase

Phytase liberates inorganic phosphate from phytic acid (myo-inositol hexakisphosphate) which is the major phosphate reserve in plant-derived foods and feeds. An industrial strain of Saccharomyces cerevisiae expressing the Debaryomyces castellii phytase gene (phytDc) and D. occidentalis alpha-amylase gene (AMY) was developed. The phytDc and AMY genes were constitutively expressed under the ADC1 promoter in S. cerevisiae by using the delta-integration system, which contains DNA derived exclusively from yeast. The recombinant industrial strain secreted both phytase and alpha-amylase for the efficient degradation of phytic acid and starch as main components of plant seeds. This new strain hydrolyzed 90% of 0.5% (w/v) sodium phytate within 5 days of growth and utilized 100% of 2% (w/v) starch within 48 h simultaneously.