Characterization of porous collagen/hyaluronic acid scaffold modified by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide cross-linking

Review on Engineering of Bone Scaffolds Using Conventional and Additive Manufacturing Technologies

Bone is a complex connective tissue that serves as mechanical and structural support for the human body. Bones' fractures are common, and the healing process is physiologically complex and involves both mechanical and biological aspects. Tissue engineering of bone scaffolds holds great promise for the future treatment of bone injuries. However, conventional technologies to prepare bone scaffolds cannot provide the required properties of human bones. Over the past decade, three-dimensional (3D) printing or additive manufacturing technologies have enabled control over the creation of bone scaffolds with personalized geometries, appropriate materials, and tailored pores. This article aims to review recent advances in the fabrication of bone scaffolds for bone repair and regeneration. A detailed review of bone fracture repair and an in-depth discussion on conventional manufacturing and 3D printing techniques are introduced with an emphasis on novel studies concepts, potentials, and limitations.

Curcumin-loaded keratin-chitosan hydrogels for enhanced peripheral nerve regeneration

Peripheral nerve injury often leads to symptoms of motor and sensory impairment, and slow recovery of nerves after injury and limited treatment methods will aggravate symptoms or even lead to lifelong disability. Curcumin can promote peripheral nerve regeneration, but how to accurately deliver the appropriate concentration of curcumin in the local peripheral nerve remains to be solved. In this study, we designed a human hair keratin/chitosan (C/K) hydrogel with sodium tripolyphosphate ions crosslinked to deliver curcumin topically. Chitosan improves the mechanical properties of hydrogels and keratin improves the biocompatibility of hydrogels. C/K hydrogel showed good cytocompatibility, histocompatibility and degradability. In vitro experiments showed that hydrogels can continuously release curcumin for up to 10 days. In addition, a comprehensive analysis of behavioral, electrophysiological, histology, and target organ recovery results in animal experiments showed that locally delivered curcumin can enhance nerve regeneration in addition to hydrogels. In short, we provide a new method that combines the advantages of human hair keratin, chitosan, and curcumin for nerve damage repair.

The diazirine-mediated photo-crosslinking of collagen improves biomaterial mechanical properties and cellular interactions

In tissue engineering, crosslinking with carbodiimides such as EDC is omnipresent to improve the mechanical properties of biomaterials. However, in collagen biomaterials, EDC reacts with glutamate or aspartate residues, inactivating the binding sites for cellular receptors and rendering collagen inert to many cell types. In this work, we have developed a crosslinking method that ameliorates the rigidity, stability, and degradation rate of collagen biomaterials, whilst retaining key interactions between cells and the native collagen sequence. Our approach relies on the UV-triggered reaction of diazirine groups grafted on lysines, leaving critical amino acid residues intact. Notably, GxxGER recognition motifs for collagen-binding integrins, ablated by EDC crosslinking, were left unreacted, enabling cell attachment, spreading, and colonization on films and porous scaffolds. In addition, our procedure conserves the architecture of biomaterials, improves their resistance to collagenase and cellular contraction, and yields material stiffness akin to that obtained with EDC. Importantly, diazirine-crosslinked collagen can host mesenchymal stem cells, highlighting its strong potential as a substrate for tissue repair. We have therefore established a new crosslinking strategy to modulate the mechanical features of collagen porous scaffolds without altering its biological properties, thereby offering an advantageous alternative to carbodiimide treatment. STATEMENT OF SIGNIFICANCE: This article describes an approach to improve the mechanical properties of collagen porous scaffolds, without impacting collagen's natural interactions with cells. This is significant because collagen crosslinking is overwhelmingly performed using carbodiimides, which results in a critical loss of cellular affinity. By contrast, our method leaves key cellular binding sites in the collagen sequence intact, enabling cell-biomaterial interactions. It relies on the fast, UV-triggered reaction of diazirine with collagen, and does not produce toxic by-products. It also supports the culture of mesenchymal stem cells, a pivotal cell type in a wide range of tissue repair applications. Overall, our approach offers an attractive option for the crosslinking of collagen, a prominent material in the growing field of tissue engineering.

Extraction of collagenolytic proteases from Aspergillus heteromorphus URM 0269 in an aqueous two-phase system for application in collagen hydrolysis

Collagenolytic proteases produced by Aspergillus heteromorphus URM0269 were extracted using a PEG/sulfate aqueous two-phase system (ATPS). A 23 factorial design was performed to analyze the independent variables: PEG molar mass (MPEG), PEG concentration (CPEG), and sulfate concentration (Csulf). The extracted proteases were also evaluated for their optimum pH and stability at different pH levels (4.0 - 11.0) after 20 h of incubation. Collagen was extracted from mutton snapper (Lutjanus analis) skin using acetic acid (0.5 mol L-1). The enzyme was preferentially partitioned to the PEG-rich phase (K > 1), whose highest purification factor and recovery (PF = 6.256 and Y = 404.432%) were obtained under specific conditions: MPEG 8000 g.mol-1, CPEG 30%, Csulf 10%. The ATPS extraction provided an enzymatic activity range of pH 7.0 - 11.0, exhibiting greater stability compared to the crude extract. Approximately 80% of protease activity was maintained after 20 hours of incubation at all analyzed pH levels, except pH 11.0. Collagen extraction from L. analis skin yielded 8.056%, and both crude extract samples and ATPS-derived samples successfully hydrolyzed the extracted collagen, reaching peak hydrolysis after 36 hours of treatment. These findings demonstrate the feasibility of extracting highly purified and active proteases capable of hydrolyzing L. analis collagen.

Surface Modification Progress for PLGA-Based Cell Scaffolds

Poly(lactic-glycolic acid) (PLGA) is a biocompatible bio-scaffold material, but its own hydrophobic and electrically neutral surface limits its application as a cell scaffold. Polymer materials, mimics ECM materials, and organic material have often been used as coating materials for PLGA cell scaffolds to improve the poor cell adhesion of PLGA and enhance tissue adaptation. These coating materials can be modified on the PLGA surface via simple physical or chemical methods, and coating multiple materials can simultaneously confer different functions to the PLGA scaffold; not only does this ensure stronger cell adhesion but it also modulates cell behavior and function. This approach to coating could facilitate the production of more PLGA-based cell scaffolds. This review focuses on the PLGA surface-modified materials, methods, and applications, and will provide guidance for PLGA surface modification.

Effects of polycaprolactone degradation products on the water flea, Daphnia magna: Carbodiimide additives have acute and chronic toxicity

Plastics have benefited our lives in many ways, but their long persistence in the environment causes serious problems. Rapid decomposition and detoxification of plastics after use are significant challenges. As a possible solution, biodegradable plastics have attracted attention, and for environmental risk assessment research on polymer toxicity, use of indicator organisms, like water fleas and fish, has increased globally. However, such research often focuses on standardized substances without considering changes in toxicity due to plastic degradation products. Additionally, tests generally focus on acute toxicity, while long-term effects on organismal reproduction and lifespan are largely unknown. Understanding the impact of degraded polymers on biological activities is crucial for accurate risk assessment. In this study, we investigated the biological toxicity of substances generated during degradation of polycaprolactone (PCL), a common biodegradable plastic, using the indicator organism, Daphnia magna. We examined PCL, oligocaprolactones (OCLs), and monomers resulting from polymer cleavage, as well as carbodiimides, added during polyester synthesis. As a result, PCL, which is insoluble in water, reduced individual survival and total number of offspring at an exposure concentration of 100 mg/L, while no toxicity was observed for water-soluble degradation products, OCLs, and monomers. Furthermore, carbodiimides, which are expected to be released during PCL degradation, showed strong toxicity, significantly reducing individual survival and total number of offspring at 0.1-10 mg/L. These findings suggest that changes in physical properties due to polymer degradation and release of additives can significantly alter their toxicity.

Physicochemical properties and cell proliferation and adhesive bioactivity of collagen-hyaluronate composite gradient membrane

Membrane materials were widely used in guided tissue regeneration (GTR) to prevent fibroblast invasion and form a confined area for preferentially growing of osteoblast. A novel collagen-hyaluronate composite gradient membrane was prepared by Tilapia (Oreochromis mossambicus) skin collagen and sodium hyaluronate for potential GTR applications and their bioactivities were investigated by cellular viability. SEM results indicated the membrane showed a dense outer and a porous inner surface for effectively guiding the growth of bone tissue. Physicochemical and biosafety experiments showed the tensile strength of membrane was 466.57 ± 44.31 KPa and contact angle was 74.11°, and the membrane showed perfect biocompatibility and cytocompatibility as well, which met the requirements of GTR material. Cell morphology revealed that the membrane could facilitate the adherence and proliferation of fibroblast and osteoblast. The results of qRT-PCR and ELISA demonstrated that the membrane could effectively activate TGF-β/Smad pathway in fibroblast, and promote the expressions of TGF-β1, FN1 and VEGF. Remarkably, RUNX2 was stimulated in BMP2 pathway by the membrane to regulate osteoblast differentiation. In summary, the collagen-hyaluronate composite gradient membrane not only fulfills the prerequisites for use as a GTR material but also demonstrates substantial potential for practical applications in the field.

Biomimetic-modified bioprosthetic heart valves with Cysteine-Alanine-Glycine peptide for anti-thrombotic, endothelialization and anti-calcification

In recent years, bioprosthetic heart valves (BHVs) prepared by cross-linking porcine or bovine pericardium with glutaraldehyde (Glut) have received widespread attention due to their excellent hemocompatibility and hydrodynamic properties. However, the failure of BHVs induced by thrombosis and difficulty in endothelialization still exists in clinical practice. Improving the biocompatibility and endothelialization potential of BHVs is conducive to promoting their anti-thrombosis properties and prolonging their service life. Herein, Cysteine-Alanine-Glycine (CAG) peptide was introduced into the biomimetic BHV materials modified by 2-methacryloyloxyethyl phosphorylcholine (MPC) to improve their anti-thrombosis and promoting-endothelialization performances. MPC can improve the anti-adsorption performance of BHV materials, as well as, CAG contributes to the adhesion and proliferation of endothelial cells on the surface of BHV materials. The results of experiments showed that the biomimetic modification strategy with MPC and CAG reduce the thrombosis of BHV materials and improve their endothelialization in vitro. More importantly, the calcification of BHV significantly reduced by inhibiting the expression of M1 macrophage-related factors (IL-6, iNOS) and promoting the expression of M2 macrophage-related factors (IL-10, CD206). We believe that the valve-modified strategy is expected to provide effective solutions to clinical valve problems.

Preparation and in vitro characterization of curcumin loaded Chitosan-Hyaluronic acid polyelectrolyte complex based hydrogels

OBJECTIVE

The manuscript aims to prepare and comprehensively characterize curcumin-loaded chitosan-hyaluronic acid polyelectrolyte complex (PEC) hydrogels through in vitro assessments. By elucidating the formulation process, physicochemical attributes, and drug release kinetics, the study contributes to the producing of curcumin loaded new drug delivery system.

SIGNIFICANCE

This approach shows the unique synergy of the chosen polymers with curcumin. The meticulous in vitro analysis of the hydrogels cements their novel attributes, underlining their potential as efficacious and biocompatible curcumin carriers.

METHODS

To configure the optimum formulation variables, viscosity, swelling ratio, porosity, in vitro release, cell viability, and migration rate were determined. In addition, FTIR and SEM analyses were also carried out to define the characteristic of formulations.

RESULTS

Release kinetic determination is essential in estimating the release behavior of formulation in the body. All formulations showed Higuchi release kinetics, indicating that drug release from the semi-solid matrix was diffusion controlled.

CONCLUSION

As a result, in this study, a new formulation was produced based on a simple concept with acceptable quality parameter results promising to be conducted in the industry.

The effect of GelMA/alginate interpenetrating polymeric network hydrogel on the performance of porous zirconia matrix for bone regeneration applications

Bone tissue is a natural composite, exhibiting complicated structures and unique mechanical/biological properties. With an attempt of mimicking the bone tissue, a novel inorganic-organic composite scaffolds (ZrO2-GM/SA) was designed and prepared via the vacuum infiltration method and the single/double cross-linking strategy by blending GelMA/alginate (GelMA/SA) interpenetrating polymeric network (IPN) into the porous zirconia (ZrO2) scaffold. The structure, morphology, compressive strength, surface/interface properties, and biocompatibility of the ZrO2-GM/SA composite scaffolds were characterized to evaluate the performance of the composite scaffolds. Results showed that compared to ZrO2 bare scaffolds with well-defined open pores, the composite scaffolds prepared by double cross-linking of GelMA hydrogel and sodium alginate (SA) presented a continuous, tunable and honeycomb-like microstructure. Meanwhile, GelMA/SA showed favorable and controllable water-uptake capacity, swelling property and degradability. After the introduction of IPN components, the mechanical strength of composite scaffolds was further improved. The compressive modulus of composite scaffolds was significantly higher than the bare ZrO2 scaffolds. In addition, ZrO2-GM/SA composite scaffolds had highly biocompatibility and displayed a potent proliferation and osteogenesis of MC3T3-E1 pre-osteoblasts compared to bare ZrO2 scaffolds and ZrO2-GelMA composite scaffolds. At the same time, ZrO2-10GM/1SA composite scaffold regenerated significantly greater bone than other groups in vivo. This study demonstrated that the proposed ZrO2-GM/SA composite scaffolds had great research and application potential in bone tissue engineering.

Application of polyvinyl alcohol/chitosan copolymer hydrogels in biomedicine: A review

Hydrogels is a hydrophilic, cross-linked polymer of three-dimensional network structures. The application of hydrogels prepared from a single polymer in the biomedical field has many drawbacks. The functional blend of polyvinyl alcohol and chitosan allows hydrogels to have better and more desirable properties than those produced from a single polymer, which is a good biomaterial for development and design. In this paper, we have reviewed the progress in the application of polyvinyl alcohol/chitosan composite hydrogels in various medical fields, the different cross-linking agents and cross-linking methods, and the research progress in the optimization of composite hydrogels for their subsequent wide range of biomedical applications.

Hyaluronic acid-based hydrogels: As an exosome delivery system in bone regeneration

Exosomes are extracellular vesicles (EVs) containing various ingredients such as DNA, RNA, lipids and proteins, which play a significant role in intercellular communication. Numerous studies have demonstrated the important role of exosomes in bone regeneration through promoting the expression of osteogenic-related genes and proteins in mesenchymal stem cells. However, the low targeting ability and short circulating half-life of exosomes limited their clinical application. In order to solve those problems, different delivery systems and biological scaffolds have been developed. Hydrogel is a kind of absorbable biological scaffold composed of three-dimensional hydrophilic polymers. It not only has excellent biocompatibility and superior mechanical strength but can also provide a suitable nutrient environment for the growth of the endogenous cells. Thus, the combination between exosomes and hydrogels can improve the stability and maintain the biological activity of exosomes while achieving the sustained release of exosomes in the bone defect sites. As an important component of the extracellular matrix (ECM), hyaluronic acid (HA) plays a critical role in various physiological and pathological processes such as cell differentiation, proliferation, migration, inflammation, angiogenesis, tissue regeneration, wound healing and cancer. In recent years, hyaluronic acid-based hydrogels have been used as an exosome delivery system for bone regeneration and have displayed positive effects. This review mainly summarized the potential mechanism of HA and exosomes in promoting bone regeneration and the application prospects and challenges of hyaluronic acid-based hydrogels as exosome delivery devices in bone regeneration.

Green approaches for extraction, chemical modification and processing of marine polysaccharides for biomedical applications

Over the past few decades, natural-origin polysaccharides have received increasing attention across different fields of application, including biomedicine and biotechnology, because of their specific physicochemical and biological properties that have afforded the fabrication of a plethora of multifunctional devices for healthcare applications. More recently, marine raw materials from fisheries and aquaculture have emerged as a highly sustainable approach to convert marine biomass into added-value polysaccharides for human benefit. Nowadays, significant efforts have been made to combine such circular bio-based approach with cost-effective and environmentally-friendly technologies that enable the isolation of marine-origin polysaccharides up to the final construction of a biomedical device, thus developing an entirely sustainable pipeline. In this regard, the present review intends to provide an up-to-date outlook on the current green extraction methodologies of marine-origin polysaccharides and their molecular engineering toolbox for designing a multitude of biomaterial platforms for healthcare. Furthermore, we discuss how to foster circular bio-based approaches to pursue the further development of added-value biomedical devices, while preserving the marine ecosystem.

Heterogeneous matrix stiffness regulates the cancer stem-like cell phenotype in hepatocellular carcinoma

BACKGROUND

Solid tumors are stiffer than their surrounding normal tissues; however, their interior stiffness is not uniform. Under certain conditions, cancer cells can acquire stem-like phenotypes. However, it remains unclear how the heterogeneous physical microenvironment affects stemness expression in cancer cells. Here, we aimed to evaluate matrix stiffness heterogeneity in hepatocellular carcinoma (HCC) tissues and to explore the regulation effect of the tumor microenvironment on stem-like phenotypic changes through mechanical transduction.

METHODS

First, we used atomic force microscopy (AFM) to evaluate the elastic modulus of HCC tissues. We then used hydrogel with adjustable stiffness to investigate the effect of matrix stiffness on the stem-like phenotype expression of HCC cells. Moreover, cells cultured on hydrogel with different stiffness were subjected to morphology, real-time PCR, western blotting, and immunofluorescence analyses to explore the mechanotransduction pathway. Finally, animal models were used to validate in vitro results.

RESULTS

AFM results confirmed the heterogenous matrix stiffness in HCC tissue. Cancer cells adhered to hydrogel with varying stiffness (1.10 ± 0.34 kPa, 4.47 ± 1.19 kPa, and 10.61 kPa) exhibited different cellular and cytoskeleton morphology. Higher matrix stiffness promoted the stem-like phenotype expression and reduced sorafenib-induced apoptosis. In contrast, lower stiffness induced the expression of proliferation-related protein Ki67. Moreover, mechanical signals were transmitted into cells through the integrin-yes-associated protein (YAP) pathway. Higher matrix stiffness did not affect YAP expression, however, reduced the proportion of phosphorylated YAP, promoted YAP nuclear translocation, and regulated gene transcription. Finally, application of ATN-161 (integrin inhibitor) and verteporfin (YAP inhibitor) effectively blocked the stem-like phenotype expression regulated by matrix stiffness.

CONCLUSIONS

Our experiments provide new insights into the interaction between matrix stiffness, cancer cell stemness, and heterogeneity, while also providing a novel HCC therapeutic strategy.

Fabrication Strategies Towards Hydrogels for Biomedical Application: Chemical and Mechanical Insights

This review aims at giving selected chemical and mechanical insights on design criteria that should be taken into account in hydrogel production for biomedical applications. Particular emphasis will be given to the chemical aspects involved in hydrogel design: macromer chemical composition, cross-linking strategies and chemistry towards "conventional" and smart/stimuli responsive hydrogels. Mechanical properties of hydrogels in view of regenerative medicine applications will also be considered.

Customizable Collagen Vitrigel Membranes and Preliminary Results in Corneal Engineering

Corneal opacities are a leading cause of visual impairment that affect 4.2 million people annually. The current treatment is corneal transplantation, which is limited by tissue donor shortages. Corneal engineering aims to develop membranes that function as scaffolds in corneal cell transplantation. Here, we describe a method for producing transplantable corneal constructs based on a collagen vitrigel (CVM) membrane and corneal endothelial cells (CECs). The CVMs were produced using increasing volumes of collagen type I: 1X (2.8 μL/mm²), 2X, and 3X. The vitrification process was performed at 40% relative humidity (RH) and 40 °C using a matryoshka-like system consisting of a shaking-oven harboring a desiccator with a saturated K₂CO₃ solution. The CVMs were characterized via SEM microscopy, cell adherence, FTIR, and manipulation in an ex vivo model. A pilot transplantation of the CECs/CVM construct in rabbits was also carried out. The thickness of the CVMs was 3.65–7.2 µm. The transparency was superior to a human cornea (92.6% = 1X; 94% = 2X; 89.21% = 3X). SEM microscopy showed a homogenous surface and laminar organization. The cell concentration seeded over the CVM increased threefold with no significant difference between 1X, 2X, and 3X (p = 0.323). The 2X-CVM was suitable for surgical manipulation in the ex vivo model. Constructs using the CECs/2X-CVM promoted corneal transparency restoration.

A Beginner’s Guide to the Characterization of Hydrogel Microarchitecture for Cellular Applications

The extracellular matrix (ECM) is a three-dimensional, acellular scaffold of living tissues. Incorporating the ECM into cell culture models is a goal of cell biology studies and requires biocompatible materials that can mimic the ECM. Among such materials are hydrogels: polymeric networks that derive most of their mass from water. With the tuning of their properties, these polymer networks can resemble living tissues. The microarchitectural properties of hydrogels, such as porosity, pore size, fiber length, and surface topology can determine cell plasticity. The adequate characterization of these parameters requires reliable and reproducible methods. However, most methods were historically standardized using other biological specimens, such as 2D cell cultures, biopsies, or even animal models. Therefore, their translation comes with technical limitations when applied to hydrogel-based cell culture systems. In our current work, we have reviewed the most common techniques employed in the characterization of hydrogel microarchitectures. Our review provides a concise description of the underlying principles of each method and summarizes the collective data obtained from cell-free and cell-loaded hydrogels. The advantages and limitations of each technique are discussed, and comparisons are made. The information presented in our current work will be of interest to researchers who employ hydrogels as platforms for cell culture, 3D bioprinting, and other fields within hydrogel-based research.

Mimicking the Composition and Structure of the Osteochondral Tissue to Fabricate a Heterogeneous Three-Layer Scaffold for the Repair of Osteochondral Defects

Heterogeneous three-layer scaffolds were fabricated by mimicking the biochemical composition and structure of the hyaline cartilage, calcified cartilage, and subchondral bone of the osteochondral tissue for the repair of osteochondral defects. The hyaline cartilage layer was composed of collagen I (50.0 wt %) and sodium hyaluronate (50.0 wt %). The calcified cartilage layer and subchondral bone layer were composed of collagen I, sodium hyaluronate, and nanohydroxyapatite with different proportions. N-Hydroxysuccinimide/N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride was used to mediate the crosslinking reaction of the amine groups of collagen with carboxyl groups of sodium hyaluronate. The hyaline cartilage layer and calcified cartilage layer were designed as dense structures, while the subchondral bone layer was designed as a relatively loose structure by adjusting the crosslinking degree. The scaffolds displayed a uniform and interconnected porous structure and possessed a high porosity over 85%, which were conducive to cellular adhesion and proliferation. The scaffolds could remain at 50-75% after 30 days of degradation owing to crosslinking, providing enough time for the regeneration of the osteochondral tissue. Especially, the hyaline cartilage layer and calcified cartilage layer preferred to induce the proliferation of chondrocytes, while the subchondral bone layer was more conducive to the proliferation of osteoblasts. In conclusion, the heterogeneous multilayer scaffolds could serve as implant materials for osteochondral reconstruction.

A sandcastle worm-inspired strategy to functionalize wet hydrogels

Hydrogels have been extensively used in many fields. Current synthesis of functional hydrogels requires incorporation of functional molecules either before or during gelation via the pre-organized reactive site along the polymer chains within hydrogels, which is tedious for polymer synthesis and not flexible for different types of hydrogels. Inspired by sandcastle worm, we develop a simple one-step strategy to functionalize wet hydrogels using molecules bearing an adhesive dibutylamine-DOPA-lysine-DOPA tripeptide. This tripeptide can be easily modified with various functional groups to initiate diverse types of polymerizations and provide functional polymers with a terminal adhesive tripeptide. Such functional molecules enable direct modification of wet hydrogels to acquire biological functions such as antimicrobial, cell adhesion and wound repair. The strategy has a tunable functionalization degree and a stable attachment of functional molecules, which provides a tool for direct and convenient modification of wet hydrogels to provide them with diverse functions and applications.

Suture Fiber Reinforcement of a 3D Printed Gelatin Scaffold for Its Potential Application in Soft Tissue Engineering

Gelatin has excellent biological properties, but its poor physical properties are a major obstacle to its use as a biomaterial ink. These disadvantages not only worsen the printability of gelatin biomaterial ink, but also reduce the dimensional stability of its 3D scaffolds and limit its application in the tissue engineering field. Herein, biodegradable suture fibers were added into a gelatin biomaterial ink to improve the printability, mechanical strength, and dimensional stability of the 3D printed scaffolds. The suture fiber reinforced gelatin 3D scaffolds were fabricated using the thermo-responsive properties of gelatin under optimized 3D printing conditions (-10 °C cryogenic plate, 40-80 kPa pneumatic pressure, and 9 mm/s printing speed), and were crosslinked using EDC/NHS to maintain their 3D structures. Scanning electron microscopy images revealed that the morphologies of the 3D printed scaffolds maintained their 3D structure after crosslinking. The addition of 0.5% (w/v) of suture fibers increased the printing accuracy of the 3D printed scaffolds to 97%. The suture fibers also increased the mechanical strength of the 3D printed scaffolds by up to 6-fold, and the degradation rate could be controlled by the suture fiber content. In in vitro cell studies, DNA assay results showed that human dermal fibroblasts' proliferation rate of a 3D printed scaffold containing 0.5% suture fiber was 10% higher than that of a 3D printed scaffold without suture fibers after 14 days of culture. Interestingly, the supplement of suture fibers into gelatin biomaterial ink was able to minimize the cell-mediated contraction of the cell cultured 3D scaffolds over the cell culture period. These results show that advanced biomaterial inks can be developed by supplementing biodegradable fibers to improve the poor physical properties of natural polymer-based biomaterial inks.

In Vitro Evaluation of a Composite Gelatin-Hyaluronic Acid-Alginate Porous Scaffold with Different Pore Distributions for Cartilage Regeneration

Although considerable achievements have been made in the field of regenerative medicine, since self-repair is not an advanced ability of articular cartilage, the regeneration of osteochondral defects is still a challenging problem in musculoskeletal diseases. Cartilage regeneration aims to design a scaffold with appropriate pore structure and biological and mechanical properties for the growth of chondrocytes. In this study, porous scaffolds made of gelatin, hyaluronic acid, alginate, and sucrose in different proportions of 2 g (S_L2) and 4 g (S_L4) were used as porogens in a leaching process. Sucrose with particle size ranges of 88–177 μm (Hμ) and 44–74 μm (SHμ) was added to the colloid, and the individually cross-linked hydrogel scaffolds with controllable pore size for chondrocyte culture were named Hμ-S_L2, Hμ-S_L4, SHμ-S_L2 and SHμ-S_L4. The perforation, porosity, mechanical strength, biocompatibility, and proliferation characteristics of the hydrogel scaffold and its influence on chondrocyte differentiation are discussed. Results show that the addition of porogen increases the porosity of the hydrogel scaffold. Conversely, when porogens with the same particle size are added, the pore size decreases as the amount of porogen increases. The perforation effect of the hydrogel scaffolds formed by the porogen is better at 88–177 μm compared with that at 44–74 μm. Cytotoxicity analysis showed that all the prepared hydrogel scaffolds were non-cytotoxic, indicating that no cross-linking agent residues that could cause cytotoxicity were found. In the proliferation and differentiation of the chondrocytes, the SHμ-S_L4 hydrogel scaffold with the highest porosity and strength did not achieve the best performance. However, due to the compromise between perforation pores, pore sizes, and strength, as well as considering cell proliferation and differentiation, Hμ-SL4 scaffold provided a more suitable environment for the chondrocytes than other groups; therefore, it can provide the best chondrocyte growth environment for this study. The development of hydrogels with customized pore properties for defective cartilage is expected to meet the requirements of the ultimate clinical application.

Collagen- and hyaluronic acid-based hydrogels and their biomedical applications

Hydrogels have been widely investigated in biomedical fields due to their similar physical and biochemical properties to the extracellular matrix (ECM). Collagen and hyaluronic acid (HA) are the main components of the ECM in many tissues. As a result, hydrogels prepared from collagen and HA hold inherent advantages in mimicking the structure and function of the native ECM. Numerous studies have focused on the development of collagen and HA hydrogels and their biomedical applications. In this extensive review, we provide a summary and analysis of the sources, features, and modifications of collagen and HA. Specifically, we highlight the fabrication, properties, and potential biomedical applications as well as promising commercialization of hydrogels based on these two natural polymers.

Architecture and Composition Dictate Viscoelastic Properties of Organ-Derived Extracellular Matrix Hydrogels

The proteins and polysaccharides of the extracellular matrix (ECM) provide architectural support as well as biochemical and biophysical instruction to cells. Decellularized, ECM hydrogels replicate in vivo functions. The ECM’s elasticity and water retention renders it viscoelastic. In this study, we compared the viscoelastic properties of ECM hydrogels derived from the skin, lung and (cardiac) left ventricle and mathematically modelled these data with a generalized Maxwell model. ECM hydrogels from the skin, lung and cardiac left ventricle (LV) were subjected to a stress relaxation test under uniaxial low-load compression at a 20%/s strain rate and the viscoelasticity determined. Stress relaxation data were modelled according to Maxwell. Physical data were compared with protein and sulfated GAGs composition and ultrastructure SEM. We show that the skin-ECM relaxed faster and had a lower elastic modulus than the lung-ECM and the LV-ECM. The skin-ECM had two Maxwell elements, the lung-ECM and the LV-ECM had three. The skin-ECM had a higher number of sulfated GAGs, and a highly porous surface, while both the LV-ECM and the lung-ECM had homogenous surfaces with localized porous regions. Our results show that the elasticity of ECM hydrogels, but also their viscoelastic relaxation and gelling behavior, was organ dependent. Part of these physical features correlated with their biochemical composition and ultrastructure.

Label-Free Characterization of Collagen Crosslinking in Bone-Engineered Materials Using Nonlinear Optical Microscopy

Engineered biomaterials provide unique functions to overcome the bottlenecks seen in biomedicine. Hence, a technique for rapid and routine tests of collagen is required, in which the test items commonly include molecular weight, crosslinking degree, purity, and sterilization induced structural change. Among them, the crosslinking degree mainly influences collagen properties. In this study, second harmonic generation (SHG) and coherent anti-Stokes Raman scattering (CARS) microscopy are used in combination to explore the collagen structure at molecular and macromolecular scales. These measured parameters are applied for the classification and quantification among the different collagen scaffolds, which were verified by other conventional methods. It is demonstrated that the crosslinking status can be analyzed from SHG images and presented as the coherency of collagen organization that is correlated with the mechanical properties. Also, the comparative analyses of SHG signal and relative CARS signal of amide III band at 1,240 cm−1 to δCH2 band at 1,450 cm−1 of these samples provide information regarding the variation of the molecular structure during a crosslinking process, thus serving as nonlinear optical signatures to indicate a successful crosslinking.

Ferulic acid loaded microspheres reinforced in 3D hybrid scaffold for antimicrobial wound dressing

Here we report the preparation of biomimetic fibrin/chitosan/keratin hybrid scaffolds with a synergistic combination of ferulic acid loaded silica microspheres for antimicrobial wound dressing applications. The infrared and X-ray powder diffraction studies confirm the homogenous nature of the prepared hybrid scaffolds without any major interactions between the constituents. The developed hybrid scaffolds show good thermal, porosity, compression and water uptake properties. Scanning electron microscopic analysis shows that the as-synthesized ferulic acid loaded silica microspheres exhibit an average size of 35 ± 10 μm and also exposes the smooth surface with interconnected porosity in the prepared hybrid scaffolds. The incorporated ferulic acid loaded silica microspheres hybrid scaffolds show effective antimicrobial activity against the common wound pathogens. In vitro NIH3T3 fibroblast cell culture and drug release studies reveal that the prepared hybrid scaffolds have enhanced cell proliferation and adhesion with a prolonged drug release for about 72 h. In vitro wound healing and actin cytoskeleton analysis reveal that the incorporated ferulic acid loaded silica microspheres in fibrin/chitosan/keratin hybrid scaffolds facilitates cell growth and migration to damaged area through cell-cell interactions. These results suggest that the prepared hybrid scaffolds with ferulic acid loaded silica microspheres have great potential for soft tissue engineering applications particularly for the treatment of chronic and infected wounds.

Advances in biofabrication techniques for collagen-based 3D in vitro culture models for breast cancer research

Collagen is the most abundant component of the extracellular matrix (ECM), therefore it represents an ideal biomaterial for the culture of a variety of cell types. Recently, collagen-based scaffolds have shown promise as 3D culture platforms for breast cancer-based research. Two-dimensional (2D) in vitro culture models, while useful for gaining preliminary insights, are ultimately flawed as they do not adequately replicate the tumour microenvironment. As a result, they do not facilitate proper 3D cell-cell/cell-matrix interactions and often an exaggerated response to therapeutic agents occurs. The ECM plays a crucial role in the development and spread of cancer. Alterations within the ECM have a significant impact on the pathogenesis of cancer, the initiation of metastasis and ultimate progression of the disease. 3D in vitro culture models that aim to replicate the tumour microenvironment have the potential to offer a new frontier for cancer research with cell growth, morphology and genetic properties that more closely match in vivo cancers. While initial 3D in vitro culture models used in breast cancer research consisted of simple hydrogel platforms, recent advances in biofabrication techniques, including freeze-drying, electrospinning and 3D bioprinting, have enabled the fabrication of biomimetic collagen-based platforms that more closely replicate the breast cancer ECM. This review highlights the current application of collagen-based scaffolds as 3D in vitro culture models for breast cancer research, specifically for adherence-based scaffolds (i.e. matrix-assisted). Finally, the future perspectives of 3D in vitro breast cancer models and their potential to lead to an improved understanding of breast cancer diagnosis and treatment are discussed.

Evaluation of an octyl group-modified Alaska pollock gelatin-based surgical sealant for prevention of postoperative adhesion

Postoperative adhesion can lead to an increase in the number of surgeries required, longer operation times, and high medical costs, resulting in the quality of life of the patient being lowered. To address these clinical problems, we developed a surgical sealant with anti-adhesion properties for the prevention of postoperative adhesion following application to the large intestine surface. The developed sealant was composed of octyl (C8) group-modified Alaska pollock-derived gelatin (C8-ApGltn) and a poly(ethylene)glycol-based 4-armed crosslinker (4S-PEG) (C8-ApGltn/4S-PEG sealant). Hydrophobic modification of the ApGltn molecule with C8 groups effectively enhanced both the burst strength on the large intestine surface and the bulk modulus. An in vitro anti-adhesion test indicated that cured C8-ApGltn/4S-PEG sealant adhered to the large intestine surface showed low adhesive strength compared with commercial anti-adhesion film. Besides, cured C8-ApGltn/4S-PEG sealant effectively inhibited albumin permeation and penetration of L929 fibroblasts. In vivo experiments using a rat peritoneal anti-adhesion model showed that C8-ApGltn/4S-PEG sealant acted as a sealing barrier on the target cecum surface and also provided an anti-adhesion barrier to prevent postoperative adhesion between the peritoneum and cecum. C8-ApGltn/4S-PEG sealant showed sufficient cytocompatibility and biodegradability and therefore has potential for use in gastroenterological surgery.

Surface functionalisation of poly-APO-b-polyol ester cross-linked copolymers as core-shell nanoparticles for targeted breast cancer therapy

Polymeric nanoparticles (NPs) are commonly used as nanocarriers for drug delivery, whereby their sizes can be altered for a more efficient delivery of therapeutic active agents with better efficacy. In this work, cross-linked copolymers acted as core-shell NPs from acrylated palm olein (APO) with polyol ester were synthesized via gamma radiation-induced reversible addition-fragmentation chain transfer (RAFT) polymerisation. The particle diameter of the copolymerised poly(APO-b-polyol ester) core-shell NPs was found to be less than 300 nm, have a low molecular weight (MW) of around 24 kDa, and showed a controlled MW distribution of a narrow polydispersity index (PDI) of 1.01. These properties were particularly crucial for further use in designing targeted NPs, with inclusion of peptide for the targeted delivery of paclitaxel. Moreover, the characterisation of the synthesised NPs using Fourier Transform-Infrared (FTIR) and Neutron Magnetic Resonance (NMR) analyses confirmed the possession of biodegradable hydrolysed ester in its chemical structures. Therefore, it can be concluded that the synthesised NPs produced may potentially contribute to better development of a nano-structured drug delivery system for breast cancer therapy.

Preliminary Study of In Vitro Three-Dimensional Skin Model Using an Ovine Collagen Type I Sponge Seeded with Co-Culture Skin Cells: Submerged versus Air-Liquid Interface Conditions

Three-dimensional (3D) in vitro skin models have been widely used for cosmeceutical and pharmaceutical applications aiming to reduce animal use in experiment. This study investigate capability of ovine tendon collagen type I (OTC-I) sponge suitable platform for a 3D in vitro skin model using co-cultured skin cells (CC) containing human epidermal keratinocytes (HEK) and human dermal fibroblasts (HDF) under submerged (SM) and air-liquid interface (ALI) conditions. Briefly, the extracted OTC-I was freeze-dried and crosslinked with genipin (OTC-I_GNP) and carbodiimide (OTC-I_EDC). The gross appearance, physico-chemical characteristics, biocompatibility and growth profile of seeded skin cells were assessed. The light brown and white appearance for the OTC-I_GNP scaffold and other groups were observed, respectively. The OTC-I_GNP scaffold demonstrated the highest swelling ratio (~1885%) and water uptake (94.96 ± 0.14%). The Fourier transformation infrared demonstrated amide A, B and I, II and III which represent collagen type I. The microstructure of all fabricated sponges presented a similar surface roughness with the presence of visible collagen fibers and a heterogenous porous structure. The OTC-I_EDC scaffold was more toxic and showed the lowest cell attachment and proliferation as compared to other groups. The micrographic evaluation revealed that CC potentially formed the epidermal- and dermal-like layers in both SM and ALI that prominently observed with OTC-I_GNP compared to others. In conclusion, these results suggest that OTC_GNP could be used as a 3D in vitro skin model under ALI microenvironment.

Fabrication of Bio-Based Gelatin Sponge for Potential Use as A Functional Acellular Skin Substitute

Gelatin possesses biological properties that resemble native skin and can potentially be fabricated as a skin substitute for full-thickness wound treatment. The native property of gelatin, whereby it is easily melted and degraded at body temperature, could prevent its biofunctionality for various applications. This study aimed to fabricate and characterise buffalo gelatin (Infanca halal certified) crosslinked with chemical type crosslinker (genipin and genipin fortified with EDC) and physicaly crosslink using the dihydrothermal (DHT) method. A porous gelatin sponge (GS) was fabricated by a freeze-drying process followed by a complete crosslinking via chemical—natural and synthetic—or physical intervention using genipin (GNP), 1-ethyl-3-(3-dimethylaminopropyl) (EDC) and dihydrothermal (DHT) methods, respectively. The physicochemical, biomechanical, cellular biocompatibility and cell-biomaterial interaction of GS towards human epidermal keratinocytes (HEK) and dermal fibroblasts (HDF) were evaluated. Results showed that GS had a uniform porous structure with pore size ranging between 60 and 200 µm with high porosity (>78.6 ± 4.1%), high wettability (<72.2 ± 7.0°), high tensile strain (>13.65 ± 1.10%) and 14 h of degradation rate. An increase in the concentration and double-crosslinking approach demonstrated an increment in the crosslinking degree, enzymatic hydrolysis resistance, thermal stability, porosity, wettability and mechanical strength. The GS can be tuned differently from the control by approaching the GS via a different crosslinking strategy. However, a decreasing trend was observed in the pore size, water retention and water absorption ability. Crosslinking with DHT resulted in large pore sizes (85–300 µm) and low water retention (236.9 ± 18.7 g/m²·day) and a comparable swelling ratio with the control (89.6 ± 7.1%). Moreover no changes in the chemical content and amorphous phase identification were observed. The HEK and HDF revealed slight toxicity with double crosslinking. HEK and HDF attachment and proliferation remain similar to each crosslinking approach. Immunogenicity was observed to be higher in the double-crosslinking compared to the single-crosslinking intervention. The fabricated GS demonstrated a dynamic potential to be tailored according to wound types by manipulating the crosslinking intervention.

Bioprinting of Collagen: Considerations, Potentials, and Applications

Collagen is the most abundant extracellular matrix protein that is widely used in tissue engineering (TE). There is little research done on printing pure collagen. To understand the bottlenecks in printing pure collagen, it is imperative to understand collagen from a bottom-up approach. Here it is aimed to provide a comprehensive overview of collagen printing, where collagen assembly in vivo and the various sources of collagen available for TE application are first understood. Next, the current printing technologies and strategy for printing collagen-based materials are highlighted. Considerations and key challenges faced in collagen printing are identified. Finally, the key research areas that would enhance the functionality of printed collagen are presented.

Evaluation of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide Cross-Linked Collagen Membranes for Guided Bone Regeneration in Beagle Dogs

The purpose of this study was to evaluate the bone regeneration efficacy of an 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)-cross-linked collagen membrane for guided bone regeneration (GBR). A non-cross-linked collagen membrane (Control group), and an EDC-cross-linked collagen membrane (Test group) were used in this study. In vitro, mechanical, and degradation testing and cell studies were performed. In the animal study, 36 artificial bone defects were formed in the mandibles of six beagles. Implants were inserted at the time of bone grafting, and membranes were assigned randomly. Eight weeks later, animals were sacrificed, micro-computed tomography was performed, and hematoxylin-eosin stained specimens were prepared. Physical properties (tensile strength and enzymatic degradation rate) were better in the Test group than in the Control group. No inflammation or membrane collapse was observed in either group, and bone volumes (%) in defects around implants were similar in the two groups (p > 0.05). The results of new bone areas (%) analysis also showed similar values in the two groups (p > 0.05). Therefore, it can be concluded that cross-linking the collagen membranes with EDC is the method of enhancing the physical properties (tensile strength and enzymatic degradation) of the collagen membranes without risk of toxicity.

A collagen-based hydrogel containing tacrolimus for bone tissue engineering

Bone tissue engineering aims to develop bone graft structure that can heal bone defects without using autografts or allografts. The current study was conducted to promote bone regeneration using a collagen type I hydrogel containing tacrolimus. For this purpose, different amounts of tacrolimus (10 μg/ml, 100 μg/ml, and 1000 μg/ml) were loaded into the hydrogel. The resulting drug-loaded hydrogels were characterized for their porosity, swelling capacity, weight loss, drug release, blood compatibility, and cell proliferation (MTT). For functional analysis, the developed hydrogel surrounded by a film made of gelatin and polycaprolactone (PCL) was administrated in the calvarias defect of Wistar rats. The results indicated that the hydrogel has a porosity of 89.2 ± 12.5% and an appropriate swelling, drug release, and blood compatibility behavior. The in vitro results indicated that the collagen hydrogel containing 1000 μg tacrolimus was adequate in terms of cell proliferation. Finally, in vivo studies provided some evidence of the potential of the developed hydrogel for bone healing.

Chemical cross-linking on gelatin-hyaluronan loaded with hinokitiol for the preparation of guided tissue regeneration hydrogel membranes with antibacterial and biocompatible properties

The mechanical properties and structural stability of hydrogels and their performance in antidegradation can be enhanced by cross-linking them with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC). However, residual EDC compromises the biocompatibility of cross-linked hydrogels and the formability of un-cross-linked hydrogels. In this study, a facile process for preparing hydrogel regenerative membranes exerting antibacterial effects and containing gelatin/hyaluronic acid (G/HA) through solution casting was proposed. The membranes were cross-linked with EDC (G/HA-Ec-0H) and impregnated with two concentrations of the antibacterial agent of hinokitiol (G/HA-Ec-2H and G/HA-Ec-4H). Amide bonds formed, and the rate of active amino acid fixation was higher than 90%, which was directly proportional to the degree of cross-linking. The G/HA-Ec-2H and G/HA-Ec-4H groups with hinokitiol showed good antibacterial properties. The rate of hydrogel degradation decreased, and the integrity of sample morphology was maintained at more than 80% for over 3 days in the immersion. Then, the hydrogel structures relaxed and disintegrated through a rapid degradation reaction within 24 h. The biocompatibility results showed that low concentrations of hinokitiol did not affect cell viability. Moreover, hydrogel membranes after 14 days of cell incubation showed good cell adhesion and proliferation. In summary, the membrane biostability of the cross-linked gelatin/hyaluronan hydrogels was enhanced by EDC at a biocompatible concentration, and the functionalized group of G/HA-Ec-2H shows potential as a biodegradable material for biocompatible tissue-guarded regeneration membranes with antibacterial properties.

Cross-linking effects of carbodiimide, oxidized chitosan oligosaccharide and glutaraldehyde on acellular dermal matrix of basa fish (Pangasius bocourti)

Basa acellular dermal matrix (BADM) has advantages in the preparation of oral prosthetic membranes. In order to prepare high-quality BADM, a suitable cross-linking agent is necessary. In this study, acellular dermal matrix was prepared from basa fish skin and then cross-linked with carbodiimide (EDC), oxidized chitosan oligosaccharide (OCOS) and glutaraldehyde (GA), respectively. Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), histological staining, DNA electrophoresis and the limulus amoebocyte lysate chromogenic assay were used to detect the structure and properties of BADM. The compatibility of BADM was detected by implantation in vivo and cell experiments. The results showed that the majority of the cellular and DNA in BADM were removed. The endotoxin was not be detected. Furthermore, the structure of BADM was not destroyed. The mechanical and anti-degraded properties of BADM were promoted obviously after cross-linking. The thermal shrinkage temperatures of wet and dry EDC-BADM (BADM cross-linked by carbodiimide) were increased by 39.22 °C and 18.27 °C, respectively, compared with that of the uncross-linked BADM. In addition, the EDC-BADM had good biocompatibility and cytocompatibility. In conclusion, carbodiimide can improve the properties of BADM, which has potential application in the field of biomaterials.

Enhanced Growth of Lapine Anterior Cruciate Ligament-Derived Fibroblasts on Scaffolds Embroidered from Poly(l-lactide-co-ε-caprolactone) and Polylactic Acid Threads Functionalized by Fluorination and Hexamethylene Diisocyanate Cross-Linked Collagen Foams

Reconstruction of ruptured anterior cruciate ligaments (ACLs) is limited by the availability and donor site morbidity of autografts. Hence, a tissue engineered graft could present an alternative in the future. This study was undertaken to determine the performance of lapine (L) ACL-derived fibroblasts on embroidered poly(l-lactide-co-ε-caprolactone) (P(LA-CL)) and polylactic acid (PLA) scaffolds in regard to a tissue engineering approach for ACL reconstruction. Surface modifications of P(LA-CL)/PLA by gas-phase fluorination and cross-linking of a collagen foam using either ethylcarbodiimide (EDC) or hexamethylene diisocyanate (HMDI) were tested regarding their influence on cell adhesion, growth and gene expression. The experiments were performed using embroidered P(LA-CL)/PLA scaffolds that were seeded dynamically or statically with LACL-derived fibroblasts. Scaffold cytocompatibility, cell survival, numbers, metabolic activity, ultrastructure and sulfated glycosaminoglycan (sGAG) synthesis were evaluated. Quantitative real-time polymerase chain reaction (QPCR) revealed gene expression of collagen type I (COL1A1), decorin (DCN), tenascin C (TNC), Mohawk (MKX) and tenomodulin (TNMD). All tested scaffolds were highly cytocompatible. A significantly higher cellularity and larger scaffold surface areas colonized by cells were detected in HMDI cross-linked and fluorinated scaffolds compared to those cross-linked with EDC or without any functionalization. By contrast, sGAG synthesis was higher in controls. Despite the fact that the significance level was not reached, gene expressions of ligament extracellular matrix components and differentiation markers were generally higher in fluorinated scaffolds with cross-linked collagen foams. LACL-derived fibroblasts maintained their differentiated phenotype on fluorinated scaffolds supplemented with a HMDI cross-linked collagen foam, making them a promising tool for ACL tissue engineering.

Optimization of the collagen extraction from Nile tilapia skin (Oreochromis niloticus) and its hydrogel with hyaluronic acid

Nile tilapia skin, an abundant waste from fish processing, can be used for collagen extraction, which has a high aggregated value for biomedical applications. Collagen extraction was conducted under different reaction conditions (time, temperature, and concentration of acetic acid) in order to optimize the yield without compromising the integrity of the collagen. Temperature and time were responsible for increased yield. The extraction at 4 and 20 °C produced the acid-solubilized collagen (ASC) with the intact triple helix and was analysed by Fourier-transform infrared spectroscopy (FT-IR) and circular dichroism (CD). The optimized ASC (which used 0.35 mol/L of acetic acid at 20 °C) was consumed to obtain for the first-time fish-based hydrogels with hyaluronic acid (HA) crosslinked with 1-ethyl-3-(3-dimethylaminopropryl carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The hydrogel was characterized by FT-IR, rheology, swelling, and scanning electron microscopy (SEM), confirming that cross-linking was accomplished. It possesses a robust organized network, swells 255 % in PBS and bears interconnected pores with a diameter in the range of 10-100 μm. Until now, col-HA hydrogels crosslinked with EDC/NHS have not been reported in literature with collagen from Nile Tilapia skin. Fish collagen can be a better option than those from land-based animals (cow and pig).

Preparation and characterization of collagen/hyaluronic acid/chitosan film crosslinked with dialdehyde starch

In this work thin film made from the mixture of collagen, hyaluronic acid and chitosan were obtained during solvent evaporation method. The mixtures of biopolymers were modified by dialdehyde starch, which was used as a crosslinking agent. The influence of crosslinking agent on the physico-chemical properties of polymeric matrices was evaluated. The interactions between functional groups of polymers were evaluated by Fourier transform infrared spectroscopy for both unmodified and modified samples. Mechanical properties of film were tested in dry condition using a mechanical testing machine. Morphology of the surface was studied by Atomic Force Microscopy and the roughness parameters were analyzed. Moreover, surface free energy and its polar and dispersive components were evaluated by contact angle measurements. It was found that the addition of dialdehyde starch modified all tested parameters of the studied films. Samples became less elastic and more resist for rupture. Moreover, samples became less rough after crosslinking process and surface free energy increased. Thin film made from the mixture of collagen, hyaluronic acid and chitosan crosslinked with dialdehyde starch can be applied in medicine and in cosmetics.

Modified acellular porcine corneal matrix in deep lamellar transplantation of rabbit cornea

This study presents to develop a modified acellular porcine corneal matrix (MAPCM) to maintain high transparency, stability and biocompatibility as a rabbit deep cornea replacement using 1-ethyl-3–(3-dimethylaminopropyl)-carbodiimide crosslinking and a mild decellularization technique. Scaffolds are translucent and remain higher amount of glycosaminoglycans after decellularization than acellular porcine corneal matrix (APCM). Enzymatic degradation kinetics and mechanical properties of scaffolds are regulated by 1-ethyl-3–(3-dimethylaminopropyl)-carbodiimide -crosslinking density. The porous structure and ultrastructure of collagenous lamellae are maintained, and the pore size of MAPCM crosslinked with 0.5% (w/v) 1-ethyl-3–(3-dimethylaminopropyl)-carbodiimide is 13.26 ± 1.65 µm, similar to that of normal porcine cornea. The transmittance of MAPCM gets 79.1 ± 0.45 to 92.7 ± 1.4% in the visible light range. Results from a CCK-8 assay indicate that MAPCM gets higher cell proliferation rate of rabbit corneal stroma cells than APCM. Since collagen fibres structural integrity and regularity of MAPCM are retained after crosslinking, the opacity and stability of MAPCM are better than those of APCM within 4 weeks of animal implantation. In addition, there is no indication of an immune response or neovascularization in or around the transplanted disc. These results reveal that MAPCM may be a more suitable scaffold for corneal substitute construction.

Distinctive bone regeneration of calvarial defects using biphasic calcium phosphate supplemented ultraviolet-crosslinked collagen membrane

Purpose

To overcome several drawbacks of chemically-crosslinked collagen membranes, modification processes such as ultraviolet (UV) crosslinking and the addition of biphasic calcium phosphate (BCP) to collagen membranes have been introduced. This study evaluated the efficacy and biocompatibility of BCP-supplemented UV-crosslinked collagen membrane for guided bone regeneration (GBR) in a rabbit calvarial model.

Methods

Four circular bone defects (diameter, 8 mm) were created in the calvarium of 10 rabbits. Each defect was randomly allocated to one of the following groups: 1) the sham control group (spontaneous healing); 2) the M group (defect coverage with a BCP-supplemented UV-crosslinked collagen membrane and no graft material); 3) the BG (defects filled with BCP particles without membrane coverage); and 4) the BG+M group (defects filled with BCP particles and covered with a BCP-supplemented UV-crosslinked collagen membrane in a conventional GBR procedure). At 2 and 8 weeks, rabbits were sacrificed, and experimental defects were investigated histologically and by micro-computed tomography (micro-CT).

Results

In both micro-CT and histometric analyses, the BG and BG+M groups at both 2 and 8 weeks showed significantly higher new bone formation than the control group. On micro-CT, the new bone volume of the BG+M group (48.39±5.47 mm³) was larger than that of the BG group (38.71±2.24 mm³, P=0.032) at 8 weeks. Histologically, greater new bone area was observed in the BG+M group than in the BG or M groups. BCP-supplemented UV-crosslinked collagen membrane did not cause an abnormal cellular reaction and was stable until 8 weeks.

Conclusions

Enhanced new bone formation in GBR can be achieved by simultaneously using bone graft material and a BCP-supplemented UV-crosslinked collagen membrane, which showed high biocompatibility and resistance to degradation, making it a biocompatible alternative to chemically-crosslinked collagen membranes.

Porous Biomimetic Hyaluronic Acid and Extracellular Matrix Protein Nanofiber Scaffolds for Accelerated Cutaneous Tissue Repair

Recent reports suggest the utility of extracellular matrix (ECM) molecules as raw components in scaffolding of engineered materials. However, rapid and tunable manufacturing of ECM molecules into fibrous structures remains poorly developed. Here we report on an immersion rotary jet-spinning (iRJS) method to show high-throughput manufacturing (up to ∼1 g/min) of hyaluronic acid (HA) and other ECM fiber scaffolds using different spinning conditions and postprocessing modifications. This system allowed control over a variety of scaffold material properties, which enabled the fabrication of highly porous (70-95%) and water-absorbent (swelling ratio ∼2000-6000%) HA scaffolds with soft-tissue mimetic mechanical properties (∼0.5-1.5 kPa). Tuning these scaffolds' properties enabled the identification of porosity (∼95%) as a key facilitator for rapid and in-depth cellular ingress in vitro. We then demonstrated that porous HA scaffolds accelerated granulation tissue formation, neovascularization, and reepithelialization in vivo, altogether potentiating faster wound closure and tissue repair. Collectively, this scalable and versatile manufacturing approach enabled the fabrication of tunable ECM-mimetic nanofiber scaffolds that may provide an ideal first building block for the design of all-in-one healing materials.

Hyaluronan-Based Nanofibers: Fabrication, Characterization and Application

Nano- and microfibers based on biopolymers are some of the most attractive issues of biotechnology due to their unique properties and effectiveness. Hyaluronan is well-known as a biodegradable, naturally-occurring polymer, which has great potential for being utilized in a fibrous form. The obtaining of fibers from hyaluronan presents a major challenge because of the hydrophilic character of the polymer and the high viscosity level of its solutions. Electrospinning, as the advanced and effective method of the fiber generation, is difficult. The nano- and microfibers from hyaluronan may be obtained by utilizing special techniques, including binary/ternary solvent systems and several polymers described as modifying (or carrying), such as polyethylene oxide (PEO) and polyvinyl alcohol (PVA). This paper reviews various methods for the synthesis of hyaluronan-based fibers, and also collects brief information on the properties and biological activity of hyaluronan and fibrous materials based on it.

Polyvinylidene fluoride-Hyaluronic acid wound dressing comprised of ionic liquids for controlled drug delivery and dual therapeutic behavior

To improve the efficacy of transdermal drug delivery systems, the physical and chemical properties of drugs need to be optimized to better penetrate into the stratum corneum and to better diffuse into the epidermis and dermis layers. Accordingly, dual-biological function ionic liquids composed of active pharmaceutical ingredients were synthesized, comprising both analgesic and anti-inflammatory properties, by combining a cation derived from lidocaine and anions derived from hydrophobic nonsteroidal anti-inflammatory drugs. Active pharmaceutical ingredient ionic liquids (API-ILs) were characterized through nuclear magnetic resonance, cytotoxicity assay, and water solubility assay. All properties were compared with those of the original drugs. By converting the analgesic and anti-inflammatory drugs into dual-function API-ILs, their water solubility increased up to 470-fold, without affecting their cytotoxic profile. These API-ILs were incorporated into a bilayer wound dressing composed of a hydrophobic polyvinylidene fluoride (PVDF) membrane to act as a drug reservoir and a biocompatible hyaluronic acid (HA) layer. The prepared bilayer wound dressing was characterized in terms of mechanical properties, membrane drug uptake and drug release behavior, and application in transdermal delivery, demonstrating to have desirable mechanical properties and improved release of API-ILs. The assessment of anti-inflammatory activity through the inhibition of LPS-induced production of nitric oxide and prostaglandin E2 by macrophages revealed that the prepared membranes containing API-ILs are as effective as those with the original drugs. Cell adhesion of fibroblasts on membrane surfaces and cell viability assay confirmed improved the viability and adhesion of fibroblasts on PVDF/HA membranes. Finally, wound healing assay performed with fibroblasts showed that the bilayer membranes containing dual-function API-ILs are not detrimental to wound healing, while displaying increased and controlled drug delivery and dual therapeutic behavior. STATEMENT OF SIGNIFICANCE: This work shows the preparation and characterization of bilayer wound dressings comprising dual-biological function active pharmaceutical ingredients based on ionic liquids with improved and controlled drug release and dual therapeutic efficiency. By converting analgesic and anti-inflammatory drugs into ionic liquids, their water solubility increases up to 470-fold. The prepared bilayer wound dressing membranes have desirable mechanical properties and improved release of drugs. The prepared membranes comprising ionic liquids display anti-inflammatory activity as effective as those with the original drugs. Cell adhesion of fibroblasts on membrane surfaces and cell viability assays show improved viability and adhesion of fibroblasts on PVDF/HA membranes, being thus of high relevance as effective transdermal drug delivery systems.

Prolonged Biodegradation and Improved Mechanical Stability of Collagen via Vapor-Phase Ti Stitching for Long-Term Tissue Regeneration

Collagen, one of the most popular biomedical materials, exhibits rapid biodegradation accompanied by a notable decrease of mechanical stability in the human body. This is a key challenge for its use in large-sized tissue regeneration, which takes a long time. In order to resolve this problem, we introduced vapor-phase titanium (Ti) derivatives into the interchain regions in collagen via TiO₂ atomic layer deposition (ALD), which has been widely used for thin-film deposition. The introduced Ti simultaneously enhanced both the tensile strength (∼384.45 MPa) and Young's modulus (∼1.56 GPa) by approximately 29 and 26% compared to the pristine commercial collagen membrane. In vitro tests demonstrated that approximately 31% of Ti-infiltrated collagen is retained after 4 weeks, whereas the pristine commercial collagen rapidly degrades by up to 90% within 1 week. The in vivo biodegradation rate was greatly improved and inversely proportional to the number of TiO₂ ALD cycles. Moreover, bone mineralization, which is observed during the late stage of bone healing, appeared only in the Ti-infiltrated collagen. We believe that our simple vapor-phase treatment method could be widely used with xenograft materials, which typically require adequate biodegradation rates and stable mechanical properties.