Titanium dioxide ceramics control the differentiated phenotype of cardiac muscle cells in culture

Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials

Porous shape memory alloys (SMAs), including NiTi and Ni-free Ti-based alloys, are unusual materials for hard-tissue replacements because of their unique superelasticity (SE), good biocompatibility, and low elastic modulus. However, the Ni ion releasing for porous NiTi SMAs in physiological conditions and relatively low SE for porous Ni-free SMAs have delayed their clinic applications as implantable materials. The present article reviews recent research progresses on porous NiTi and Ni-free SMAs for hard-tissue replacements, focusing on two specific topics: (i) synthesis of porous SMAs with optimal porous structure, microstructure, mechanical, and biological properties; and, (ii) surface modifications that are designed to create bio-inert or bio-active surfaces with low Ni releasing and high biocompatibility for porous NiTi SMAs. With the advances of preparation technique, the porous SMAs can be tailored to satisfied porous structure with porosity ranging from 30% to 85% and different pore sizes. In addition, they can exhibit an elastic modulus of 0.4⁻15 GPa and SE of more than 2.5%, as well as good cell and tissue biocompatibility. As a result, porous SMAs had already been used in maxillofacial repairing, teeth root replacement, and cervical and lumbar vertebral implantation. Based on current research progresses, possible future directions are discussed for "property-pore structure" relationship and surface modification investigations, which could lead to optimized porous biomedical SMAs. We believe that porous SMAs with optimal porous structure and a bioactive surface layer are the most competitive candidate for short-term and long-term hard-tissue replacement materials.

Novel Platform of Cardiomyocyte Culture and Coculture via Fibroblast-Derived Matrix-Coupled Aligned Electrospun Nanofiber

For cardiac tissue engineering, much attention has been given to the artificial cardiac microenvironment in which anisotropic design of scaffold and extracellular matrix (ECM) are the major cues. Here we propose poly(l-lactide-co-caprolactone) and fibroblast-derived ECM (PLCL/FDM), a hybrid scaffold that combines aligned electrospun PLCL fibers and FDM. Fibroblasts were grown on the PLCL fibers for 5-7 days and subsequently decellularized to produce PLCL/FDM. Various analyses confirmed aligned, FDM-deposited PLCL fibers. Compared to fibronectin (FN)-coated electrospun PLCL fibers (control), H9c2 cardiomyoblast differentiation was significantly effective, and neonatal rat cardiomyocyte (CM) phenotype and maturation was improved on PLCL/FDM. Moreover, a coculture platform was created using multilayer PLCL/FDM in which two different cells make indirect or direct cell-cell contacts. Such coculture platforms demonstrate their feasibility in terms of higher cell viability, efficiency of target cell harvest (>95% in noncontact; 85% in contact mode), and molecular diffusion through the PLCL/FDM layer. Coculture of primary CMs and fibroblasts exhibited much better CM phenotype and improvement of CM maturity upon either direct or indirect interactions, compared to the conventional coculture systems (transwell insert and tissue culture plate (TCP)). Taken together, our platform should be very useful and have significant contributions in investigating some scientific or practical issues of crosstalks between multiple cell types.

Titanium dioxide nanotube arrays coated with laminin enhance C2C12 skeletal myoblast adhesion and differentiation

TiO₂ nanotube arrays of various topography/surface chemistry are tested with C2C12 cells. Improved cell adhesion and differentiation are shown on 10 nm diameter nanotube arrays coated with laminin, encouraging array use for skeletal muscle tissue engineering and stimulation.

Cardiomyoblast (h9c2) differentiation on tunable extracellular matrix microenvironment

Extracellular matrices (ECM) obtained from in vitro-cultured cells have been given much attention, but its application in cardiac tissue engineering is still limited. This study investigates cardiomyogenic potential of fibroblast-derived matrix (FDM) as a novel ECM platform over gelatin or fibronectin, in generating cardiac cell lineages derived from H9c2 cardiomyoblasts. As characterized through SEM and AFM, FDM exhibits unique surface texture and biomechanical property. Immunofluorescence also found fibronectin, collagen, and laminin in the FDM. Cells on FDM showed a more circular shape and slightly less proliferation in a growth medium. After being cultured in a differentiation medium for 7 days, H9c2 cells on FDM differentiated into cardiomyocytes, as identified by stronger positive markers, such as α-actinin and cTnT, along with more elevated gene expression of Myl2 and Tnnt compared to the cells on gelatin and fibronectin. The gap junction protein connexin 43 was also significantly upregulated for the cells differentiated on FDM. A successive work enabled matrix stiffness tunable; FDM crosslinked by 2wt% genipin increased the stiffness up to 8.5 kPa, 100 times harder than that of natural FDM. The gene expression of integrin subunit α5 was significantly more upregulated on FDM than on crosslinked FDM (X-FDM), whereas no difference was observed for β1 expression. Interestingly, X-FDM showed a much greater effect on the cardiomyoblast differentiation into cardiomyocytes over natural one. This study strongly indicates that FDM can be a favorable ECM microenvironment for cardiomyogenesis of H9c2 and that tunable mechanical compliance induced by crosslinking further provides a valuable insight into the role of matrix stiffness on cardiomyogenesis.

Nanoscale TiO2 nanotubes govern the biological behavior of human glioma and osteosarcoma cells

Cells respond to their surroundings through an interactive adhesion process that has direct effects on cell proliferation and migration. This research was designed to investigate the effects of TiO₂ nanotubes with different topographies and structures on the biological behavior of cultured cells. The results demonstrated that the nanotube diameter, rather than the crystalline structure of the coatings, was a major factor for the biological behavior of the cultured cells. The optimal diameter of the nanotubes was 20 nm for cell adhesion, migration, and proliferation in both glioma and osteosarcoma cells. The expression levels of vitronectin and phosphor-focal adhesion kinase were affected by the nanotube diameter; therefore, it is proposed that the responses of vitronectin and phosphor-focal adhesion kinase to the nanotube could modulate cell fate. In addition, the geometry and size of the nanotube coating could regulate the degree of expression of acetylated α-tubulin, thus indirectly modulating cell migration behavior. Moreover, the expression levels of apoptosis-associated proteins were influenced by the topography. In conclusion, a nanotube diameter of 20 nm was the critical threshold that upregulated the expression level of Bcl-2 and obviously decreased the expression levels of Bax and caspase-3. This information will be useful for future biomedical and clinical applications.

Three-dimensional geometry of honeycomb collagen promotes higher beating rate of myocardial cells in culture

Myocardial cells were isolated from newborn rats, cultured on a novel three-dimensional (3-D) honeycomb collagen scaffold (HC) and their morphology and beating rates compared with ones on conventional plastic dishes. On the first day, the cells attached to HC had already started beating. As time went on, the rate of beating increased as the pores of HC gradually filled with the cells, which integrated to form the cell-matrix complex. At day 8, beating reached the highest frequency of 162 beats per minute, which was twice that of the control cells on plastic dishes. It was concluded that 3-D geometry of the HC is conducive to functional growth of the myocardial tissues, and will potentially be useful for tissue engineering of myocardial regeneration.

Characterizing the adsorption of peptides to TiO2 in aqueous solutions by liquid chromatography

The interactions between titanium oxide (TiO(2)) and flexible peptides, decorated by amine, carboxyl, and phosphoserine functional groups, were characterized using analytical liquid chromatography with various loading and eluting solutions. This approach enabled discernment of the type of intermolecular interactions generated between the peptides and the metal oxide surfaces in addition to unraveling more subtle effects, specific ions, and oxide phase may have on the adsorption. The peptide presenting Lys residues adsorbed to the oxide surface in the presence of Tris buffer and eluted under conditions that indicated its binding via electrostatic interactions at physiological pH values. Upon adsorption to the oxide in the presence of phosphate buffer, the same peptide exhibited stronger electrostatic interactions with the surface, mediated by the buffer phosphate ions. In Tris-buffered saline (TBS), pH 7.4, as the adsorption medium, the peptide with the phosphoserine residues exhibited affinity indicative of coordinative binding to the titanium oxide, whereas a similar peptide decorated by carboxylate groups failed to adsorb. On the basis of differences in the interactions of these peptides with the TiO(2), the efficient separation of the two peptides was demonstrated. A basic amphiphilic peptide, composed mostly of Lys and Leu residues, was found to strongly adsorb to TiO(2) while in helical conformation only, demonstrating the strong impact the secondary structure may have on adsorption to the surface. The methodology presented in this study allows the elucidation of in situ binding mechanism and relative strengths to titanium oxide surfaces at conditions which resemble biologically relevant environments.

Transformation of adult rat cardiac myocytes in primary culture

We characterized the morphological, electrical and mechanical alterations of cardiomyocytes in long-term cell culture. Morphometric parameters, sarcomere length, T-tubule density, cell capacitance, L-type calcium current (I(Ca,L)), inward rectifier potassium current (I(K1)), cytosolic calcium transients, action potential and contractile parameters of adult rat ventricular myocytes were determined on each day of 5 days in culture. We also analysed the health of the myocytes using an apoptotic/necrotic viability assay. The data show that myocytes undergo profound morphological and functional changes during culture. We observed a progressive reduction in the cell area (from 2502 +/- 70 microm(2) on day 0 to 1432 +/- 50 microm(2) on day 5), T-tubule density, systolic shortening (from 0.11 +/- 0.02 to 0.05 +/- 0.01 microm) and amplitude of calcium transients (from 1.54 +/- 0.19 to 0.67 +/- 0.19) over 5 days of culture. The negative force-frequency relationship, characteristic of rat myocardium, was maintained during the first 2 days but diminished thereafter. Cell capacitance (from 156 +/- 8 to 105 +/- 11 pF) and membrane currents were also reduced (I(Ca,L), from 3.98 +/- 0.39 to 2.12 +/- 0.37 pA pF; and I(K1), from 34.34p +/- 2.31 to 18.00 +/- 5.97 pA pF(-1)). We observed progressive depolarization of the resting membrane potential during culture (from 77.3 +/- 2.5 to 34.2 +/- 5.9 mV) and, consequently, action potential morphology was profoundly altered as well. The results of the viability assays indicate that these alterations could not be attributed to either apoptosis or necrosis but are rather an adaptation to the culture conditions over time.

Current State of the Art in Myocardial Tissue Engineering

Myocardial tissue engineering aims to repair, replace, and regenerate damaged cardiac tissue using tissue constructs created ex vivo. This approach may one day provide a full treatment for several cardiac disorders, including congenital diseases or ventricular dysfunction after myocardial infarction. Although the ex vivo construction of a myocardium-like tissue is faced with many challenges, it is nevertheless a pressing objective for cardiac reparative medicine. Multidisciplinary efforts have already led to the development of promising viable muscle constructs. In this article, we review the various concepts of cardiac tissue engineering and their specific challenges. We also review the different types of existing biografts and their physiological relevance. Although many investigators have favored cardiomyocytes, we discuss the potential of other clinically relevant cells, as well as the various hypotheses proposed to explain the functional benefit of cell transplantation.

Enantioselective Baeyer–Villiger Oxidation of Bicyclo[3.2.0]hept-2-en-6-One with Fungi: Optimization of Biotransformation and Use of TiO2 as Support of Cell Growth

Fungi from Amazonian forest soil (Ecuador) and an Italian factory were screened for Baeyer-Villiger (BV) oxidation of bicyclo [3.2.0]hept-2-en-6-one to 2-oxabicyclo[3.3.0]oct-6-en-3-one (Corey's lactone). Isolates of Fusarium sp. and F. solani produced the (+)-(1R,5S)-lactone while isolates of Aspergillus terricola and A. amazonicus afforded the (-)-(1S,5R)-lactone. Highest conversions (85% yield and 70% enantiomeric excess) were obtained with A. amazonicus grown in presence of 2.7 mM titanium dioxide.

N-Cadherin: structure, function and importance in the formation of new intercalated disc-like cell contacts in cardiomyocytes

N-Cadherin belongs to a superfamily of calcium-dependent transmembrane adhesion proteins. It mediates adhesion in the intercalated discs at the termini of cardiomyocytes thereby serving as anchor for myofibrils at cell-cell contacts. A large body of data on the molecular structure and function of N-cadherin exists, however, little is known concerning spatial and temporal interactions between the different junctional structures during formation of the intercalated disc and its maturation in postnatal development. The progression of compensated left ventricular hypertrophy to congestive left heart failure is accompanied by intercalated disc remodeling and has been demonstrated in animal models and in patients. The long-term culture of adult rat cardiomyocytes allows to investigate the development of de novo intercalated disc-like structures. In order to analyze the dynamics of the cytoskeletal redifferentiation in living cells, we used the expression of chimeric proteins tagged with the green fluorescent protein reporter. This technique is becoming a routine method in basic research and complements video time-lapse and confocal microscopy. Cultured cardiomyocytes have been used for a variety of studies in cell biology and pharmacology. Their ability to form an electrically coupled beating tissue-like network in culture possibly allows reimplantation of such cells into injured myocardium, where they eventually will form new contacts with the healthy muscle tissue. Several groups have already shown that cardiomyocytes can be grafted successfully into sites of myocardial infarcts or cryoinjuries. Autologous adult cardiomyocyte implantation, might indeed contribute to cardiac repair after infarction, thanks to advances in tissue engineering.

Plasma-immersion ion-implanted nitinol surface with depressed nickel concentration for implants in blood

Ion implantation into nitinol had been shown previously to decrease the surface nickel concentration of this alloy and produce a titanium oxide layer. Nothing is known yet about the blood compatibility of this surface and the suitability for implants in the blood vessels, like vascular stents. Nickel depletion of superelastic nitinol was obtained by oxygen or helium plasma-immersion ion implantation. The latter leads to the formation of a nickel-poor titanium-oxide surface with a nanoporous structure, which was used for comparison. Fibrinogen adsorption and conformation changes, blood platelet adhesion, and contact activation of the blood clotting cascade have been checked as in vitro parameters of blood compatibility; metabolic activity and release of cytokines IL-6 and IL-8 from cultured endothelial cells on these surfaces give information about the reaction of the blood vessel wall. The oxygen-ion-implanted nitinol surface adsorbed less fibrinogen on its surface and activated the contact system less than the untreated nitinol surface, but conformation changes of fibrinogen were higher on the oxygen-implanted nitinol. No difference between initial and oxygen-implanted nitinol was found for the platelet adherence, endothelial cell activity, or cytokine release. The nanoporous, helium-implanted nitinol behaved worse than the initial one in most aspects. Oxygen-ion implantation is seen as a useful method to decrease the nickel concentration in the surface of nitinol for cardiovascular applications.

Microscale tissue engineering using gravity-enforced cell assembly

Designing artificial microtissues by reaggregation of monodispersed primary cells, neoplastic or engineered cell lines is providing insight into cell-cell interactions and underlying regulatory networks. Recent advances in microtissue production have highlighted the potential of scaffold-free cell aggregates in maintaining tissue-specific functionality, supporting seamless integration of implants into host tissues, and providing complex feeder structures for difficult-to-differentiate cell types. Furthermore, these tissues are amenable to therapeutic and phenotype-modulating interventions using latest-generation transduction technologies. Microtissues produce therapeutic transgenes at increased levels and offer tissue-like assay environments to improve drug-function correlations in current discovery programs. Here, we outline scaffold-free microtissue design in liver, heart and cartilage, and discuss how this technology could significantly impact regenerative medicine.

Establishment of Vessel-Like Structures in Long-Term Three-Dimensional Tissue Culture of Myocardium: An Electron Microscopy Study

To assess whether long-term three-dimensional (3D) tissue culture of myocardium enables the in vitro establishment of vessel-like structures, myocardial tissue from newborn mice was incubated under conditions of 3D culture for at least 3 weeks, and studied by phase-contrast microscopy, conventional histology, immunohistochemistry, and electron microscopy. During 3 weeks of culture, a mean 24.35 +/- 3.74% of all aggregates contracted spontaneously. The contracting aggregates displayed a tissue-like architecture with small basal and apical zones, and a large central zone. The basal and apical zone consisted of immature mesenchymal cells. The underlying shell of the aggregate contained many cardiomyocytes. Vessel-like structures were found concentrated within the aggregates. Immunohistochemistry showed that up to 15% of the cells in the central zone of the aggregate were positive for the endothelial-specific BS-I lectin. Vessel-like structures were formed by cells, which often showed intracytoplasmatic lumena. Surrounding the neocapillaries, structures of a rudimentary basal membrane could be detected. A 3D culture of myocardial tissue permits the establishment of a rudimentary capillary network within the tissue aggregates, which presumably guarantees a sufficient tissue perfusion up to a maximum aggregate diameter of approximately 900 microm.

Design of artificial myocardial microtissues

Cultivation technologies promoting organization of mammalian cells in three dimensions are essential for gene-function analyses as well as drug testing and represent the first step toward the design of tissue replacements and bioartificial organs. Embedded in a three-dimensional environment, cells are expected to develop tissue-like higher order intercellular structures (cell-cell contacts, extracellular matrix) that orchestrate cellular functions including proliferation, differentiation, apoptosis, and angiogenesis with unmatched quality. We have refined the hanging drop cultivation technology to pioneer beating heart microtissues derived from pure primary rat and mouse cardiomyocyte cultures as well as mixed populations reflecting the cell type composition of rodent hearts. Phenotypic characterization combined with detailed analysis of muscle-specific cell traits, extracellular matrix components, as well as endogenous vascular endothelial growth factor (VEGF) expression profiles of heart microtissues revealed (1). a linear cell number-microtissue size correlation, (2). intermicrotissue superstructures, (3). retention of key cardiomyocyte-specific cell qualities, (4). a sophisticated extracellular matrix, and (5). a high degree of self-organization exemplified by the tendency of muscle structures to assemble at the periphery of these myocardial spheroids. Furthermore (6). myocardial spheroids support endogenous VEGF expression in a size-dependent manner that will likely promote vascularization of heart microtissues produced from defined cell mixtures as well as support connection to the host vascular system after implantation. As cardiomyocytes are known to be refractory to current transfection technologies we have designed lentivirus-based transduction strategies to lead the way for genetic engineering of myocardial microtissues in a clinical setting.