Synthesis and bioactivities of poly(ethylene glycol)–chitosan hybrids

Thermoresponsive dendronized chitosan-based hydrogels as injectable stem cell carriers

A combination of dendronization and Schiff-base chemistry endows injectable chitosan hydrogels with thermoresponsiveness, self-healing abilities and enhanced mechanical properties under physiological conditions.

Probing molecular interactions of PEGylated chitosan in aqueous solutions using a surface force apparatus

The effects of contact time, solution pH and PEGylation degree on the non-covalent interaction behavior of chitosan are systematically investigated.

Anticancer Activity of Chitosan, Chitosan Derivatives, and Their Mechanism of Action

Tailoring of chitosan through the involvement of its amino, acetamido, and hydroxy groups can give derivatives of enhanced solubility and remarkable anticancer activity. The general mechanism of such activity is associated with the disturbances in normal functioning of cell cycle, interference to the central dogma of biological system from DNA to RNA to protein or enzymatic synthesis, and the disruption of hormonal path to biosynthesis to inhibit the growth of cancer cells. Both chitosan and its various derivatives have been reported to selectively permeate through the cancer cell membranes and show anticancer activity through the cellular enzymatic, antiangiogenic, immunoenhancing, antioxidant defense mechanism, and apoptotic pathways. They get sequestered from noncancer cells and provide their enhanced bioavailability in cancer cells in a sustained release manner. This review presents the putative mechanisms of anticancer activity of chitosan and mechanistic approaches of structure activity relation upon the modification of chitosan through functionalization, complex formation, and graft copolymerization to give different derivatives.

RES-loaded pegylated CS NPs: for efficient ocular delivery

The objective of this study is to develop resveratrol (RES) loaded polyethylene glycols (PEGs) modified chitosan (CS) nanoparticles (NPs) by ionic gelation method for the treatment of glaucoma. While increasing the concentration of PEG, the particle size and polydispersity index of the formulations increased. Entrapment efficiency and RES loading (RL) of NPs decreased while increasing PEG concentration. The in vitro release of NPs showed an initial burst release of RES (45%) followed by controlled release. Osmolality of formulations revealed that the prepared NPs were iso-osmolar with the tear. Ocular tolerance of the NPs was evaluated using hen's egg test on the chorioallantoic membrane and it showed that the NPs were non-irritant. RES-loaded PEG-modified CS NPs shows an improved corneal permeation compared with RES dispersion. Fluorescein isothiocyanate loaded CS NPs accumulated on the surface of the cornea but the PEG-modified CS NPs crossed the cornea and reached retinal choroid. RES-loaded PEG-modified CS NPs reduced the intra-ocular pressure (IOP) by 4.3 ± 0.5 mmHg up to 8 h in normotensive rabbits. These results indicate that the developed NPs have efficient delivery of RES to the ocular tissues and reduce the IOP for the treatment of glaucoma.

Advances in self-assembled chitosan nanomaterials for drug delivery

Nanomaterials based on chitosan have emerged as promising carriers of therapeutic agents for drug delivery due to good biocompatibility, biodegradability, and low toxicity. Chitosan originated nanocarriers have been prepared by mini-emulsion, chemical or ionic gelation, coacervation/precipitation, and spray-drying methods. As alternatives to these traditional fabrication methods, self-assembled chitosan nanomaterials show significant advantages and have received growing scientific attention in recent years. Self-assembly is a spontaneous process by which organized structures with particular functions and properties could be obtained without additional complicated processing or modification steps. In this review, we focus on recent progress in the design, fabrication and physicochemical aspects of chitosan-based self-assembled nanomaterials. Their applications in drug delivery of different therapeutic agents are also discussed in details.

Synthesis of organosoluble chitosan derivatives with polyphenolic side chains

A one-pot synthesis was used to produce chitosan derivatives with polyphenolic side chains via a regioselective phenolic coupling reaction. Under Mannich reaction conditions, treatment of chitosan with formaldehyde and methyl 2,4-dihydroxybenzoate gave N-(2,6-dihydroxy-3-methoxycarbonylphenyl)methylated chitosan in good yield (87%). Formation of a CC bond occurred regioselectively at the C(3) position of methyl 2,4-dihydroxybenzoate. Chitosan derivatives having various phenolic compounds as a side chain were easily synthesized in a similar manner. The chitosan derivatives showed good biodegradability and improved their solubility in methanol (9.8mg mL(-1)) and 2-methoxyethanol (> 10mg mL(-1)). The UV protection provided by the derivatives with phenolic benzophenone side chain was evaluated using UV spectra of polyethylene terephthalate and poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) films coated with the derivatives and the derivatives absorbed effectively in the UV-A region (<60%). Self-aggregation of the chitosan derivatives with the phenolic side chain was observed by using a fluorescent probe in aqueous solution.

Functional groups affect physical and biological properties of dextran-based hydrogels

Modification of dextran backbone allows the development of a hydrogel with specific characteristics. To enhance their functionality for tissue-engineered scaffolds, a series of dextran-based macromers was synthesized by incorporating various functional groups, including allyl isocyanate (Dex-AI), ethylamine (Dex-AE), chloroacetic acid (Dex-AC), or maleic-anhydride (Dex-AM) into dextrans. The dextran-based biodegradable hybrid hydrogels are developed by integrating polyethylene glycol diacrylate (PEGDA). To explore the effect of different derivatives on hydrogel properties, three different ratios of Dex/PEGDA are examined: low (20/80), medium (40/60), and high (60/40). Differences in physical and biological properties of the hydrogels are found, including swelling, degradation rate, mechanics, crosslinking density, biocompatibility (in vitro and in vivo), and vascular endothelial growth factor release. The results also indicate that the incorporation of amine groups into dextran gives rise to hydrogels with better biocompatible and release properties. We, therefore, conclude that the incorporation of different functional groups affects the fundamental properties of a dextran-based hydrogel network, and that amine groups are preferred to generate hydrogels for biomedical use.

Effects of precursor and cross-linking parameters on the properties of dextran-allyl isocyanate-ethylamine/poly(ethylene glycol diacrylate) biodegradable hydrogels and their release of ovalbumin

In this paper, we studied the effects of molecular weight of poly(ethylene glycol diacrylate) (PEGDA) precursor, the degree of substitution (DS) of both allyl isocyanate (AI) and amine groups in dextran-based precursor (Dex-AE), and photoinitiator concentration on Dex-AE/PEGDA hydrogel formation and its ovalbumin (OVA) release. FT-IR spectra showed chemical bond interaction between amine and urethane groups of the hydrogel carriers with OVA. The increase in PEGDA molecular weight led to a faster OVA release because of a more open gel network structure. The study on the DS of AI in Dex-AE precursor showed that an increase in AI did not result in a prominent gel network structure difference. However, the urethane groups in Dex-AE precursor showed some interactions with OVA and, thus, resulted in a slower release rate. The incorporation of amine group into Dex-AE precursor did not affect the gel network structure, but reduced the OVA release rate, and the level of reduction increased with an increasing amine group substitution into the Dex-AE precursor. This reduction could be attributed to the interaction between the amine groups in the gel carrier and OVA. An increase in the photoinitiator concentration showed no effect on the gel network structure or OVA release.

Synthesis and properties of O-carboxymethyl chitosan/methoxy poly(ethylene glycol) graft copolymers

O-carboxymethyl chitosan/methoxy poly(ethylene glycol) graft copolymers (OCMCS-g-MPEGs) with different degrees of substitution (DS) were synthesized by reductive N-alkylation of chitosan with poly(ethylene glycol) aldehyde. The properties of OCMCS-g-MPEGs, including the solubility, structure, hydrodynamic behaviors, isoelectric point (IEP) and interaction with water-soluble chitosan, were investigated. As a PEGylated polyampholyte, OCMCS-g-MPEGs can resolve in water over all pH range and the pH value at IEP (pH(IEP)) decreases when DS increases. The hydrodynamic behaviors of OCMCS-g-MPEGs in deionized H(2)O are markedly affected by DS and pH(IEP) in the experiment concentration range. The particle size of the complexes of OCMCS-g-MPEGs with water-soluble chitosan is strongly affected by the concentration of water-soluble chitosan and the pH value.

Synthesis and characterization of phosphorylcholine-substituted chitosans soluble in physiological pH conditions

A polymer analogous synthesis involving the reductive amination of phosphorylcholine (PC)-glyceraldehyde with primary amines of deacetylated chitosan (M(w) approximately 57000 g mol(-1)) was used to prepare phosphorylcholine-substituted chitosans (PC-CH) with a degree of substitution (DS) ranging from approximately 11 to approximately 53 mol % PC-substituted glucosamine residues. The PC-CH derivatives were characterized by (1)H NMR spectroscopy, FTIR spectroscopy, and multiangle laser light scattering gel permeation chromatography (MALLS-GPC). The pK(a) of the PC-substituted amine groups (pK(a) approximately 7.20) was determined by (1)H NMR titration. The PC-CH samples (1.0 g L(-1)) were shown to be nontoxic using an MTT assay performed with human KB cells. Aqueous solutions of PC-CH samples (4.0 g L(-1)) of DS >or= 22 mol % PC-substituted glucosamine residues remained clear, independently of pH (4.0 < pH < 11.0). The remarkable water solubility and nontoxicity displayed by the new PC-CH samples open up new opportunities in the design of chitosan-based biomaterials and nanoparticles.

Produção e caracterização de microesferas de quitosana modificadas quimicamente

Microesferas de quitosana podem ser empregadas na área de biomaterias, em processos biotecnológicos e como adsorventes. Neste trabalho, foi empregada a técnica de atomização e coagulação para produção dessas microesferas, que permitiu o controle dos parâmetros de operação e por conseqüência a obtenção de microesferas de tamanho e faixas de tamanho específicos. Após a sua obtenção, as microesferas foram modificadas quimicamente com objetivo de estudar as resistências térmica, mecânica e química. Para isso foram empregadas três rotas distintas: a-) reticulação com glutaraldeído; b-) reticulação com epicloridrina e c-) acetilação. As microesferas preparadas apresentaram distribuição de tamanho da ordem de 140 µm com desvio padrão de 11,9 µm. Após as modificações químicas, as microesferas apresentaram temperatura de degradação térmica em torno de 300 ºC, aumento da estabilidade química à solução de HCl, e diminuição da resistência mecânica.

Effects of sugar cross-linking agents and thermal treatment on the culture of fibroblasts in vitro on a (PEG/chitosan) membrane

The influences of sugar and a thermal treatment process on the properties of a PEG/chitosan membrane were investigated in this study. With increasing thermal treatment temperature, the cross-linking density was increased and the crystal structure was distorted in the sugar-mediated polyblend. The coloration of the samples intensified from yellow or brown to dark brown during the heat exposure, indicating that a Schiff base was formed. The presence of cross-linking was determined from the FTIR spectrum, a solubility test, and water uptake. The C=N bonding shown in the FTIR spectrum indicates that a Maillard reaction occurred in the sugar-mediated polyblend. The water uptake ability of the samples tested was in the following sequence: sucrose > glucose > D-fructose, which was inverse to the trend of the cross-linking density. The compatibility of the polyblend and the sugar-mediated polyblend with fibroblasts was demonstrated. The thermal treatment has an insignificant effect on cell attachment on chitosan and the other polyblends, but different types of sugar and the cross-linking density changed the cell behavior. Consequently, chitosan/PEG6K cross-linked with sucrose at a concentration of 10 wt% and 120 degrees C thermal treatment shows potential for biomedical applications.