Zinc-coordination of aspartic acid-76 in Sulfolobus ferredoxin is not required for thermal stability of the molecule

Crystal structures of archaeal 2-oxoacid:ferredoxin oxidoreductases from Sulfolobus tokodaii

As the first three-dimensional structure of the two-subunit type 2-oxoacid:ferredoxin oxidoreductases (OFOR) from archaea, we solved the crystal structures of STK_23000/STK_22980 (StOFOR1) and STK_24350/STK_24330 (StOFOR2) from Sulfolobus tokodaii. They showed similar overall structures, consisting of two a- and b-subunit heterodimers containing thiamin pyrophosphate (TPP) cofactor and [4Fe-4S] cluster, but lack an intramolecular ferredoxin domain. Unlike other OFORs, StOFORs can utilize both pyruvate and 2-oxoglutarate, playing a key role in the central metabolism. In the structure of StOFOR2 in unreacted pyruvate complex form, carboxylate group of pyruvate is recognized by Arg344 and Thr257 from the a-subunit, which are conserved in pyruvate:ferredoxin oxidoreductase from Desulfovbrio africanus (DaPFOR). In the structure of StOFOR1 co-crystallized with 2-oxobutyrate, electron density corresponding to a 1-hydroxypropyl group (post-decarboxylation state) was observed at the thiazole ring of TPP. The binding pockets of the StOFORs surrounding the methyl or propyl group of the ligands are wider than that of DaPFOR. Mutational analyses indicated that several residues were responsible for the broad 2-oxoacid specificity of StOFORs. We also constructed a possible complex structural model by placing a Zn(2+)-containing dicluster ferredoxin of S. tokodaii into the large pocket of StOFOR2, providing insight into the electron transfer between the two redox proteins.

Crystallographic analysis of the intact metal centres [3Fe-4S](1+/0) and [4Fe-4S](2+/1+) in a Zn(2+) -containing ferredoxin

Detailed structural models of di-cluster seven-iron ferredoxins constitute a valuable resource for folding and stability studies relating the metal cofactors' role in protein stability. The here reported, hemihedric twinned crystal structure at 2.0 A resolution from Acidianus ambivalens ferredoxin, shows an integral 103 residues, physiologically relevant native form composed by a N-terminal extension comprising a His/Asp Zn(2+) site and the ferredoxin (betaalphabeta)(2) core, which harbours intact clusters I and II, a [3Fe-4S](1+/0) and a [4Fe-4S](2+/1+) centres. This is in contrast with the previously available ferredoxin structure from Sulfolofus tokodai, which was obtained from an artificial oxidative conversion with two [3Fe-4S](1+/0) centres and poor definition around cluster II.

Studies of the molten globule state of ferredoxin: Structural characterization and implications on protein folding and iron-sulfur center assembly

The biological insertion of iron-sulfur clusters (Fe-S) involves the interaction of (metallo) chaperons with a partly folded target polypeptide. In this respect, the study of nonnative protein conformations in iron-sulfur proteins is relevant for the understanding of the folding process and cofactor assembly. We have investigated the formation of a molten globule state in the [3Fe4S][4Fe4S] ferredoxin from the thermophilic archaeon Acidianus ambivalens (AaFd), which also contains a structural zinc site. Biophysical studies have shown that, at acidic pH, AaFd retains structural folding and metal centers. However, upon increasing the temperature, a series of successive modifications occur within the protein structure: Fe-S disassembly, loss of tertiary contacts and dissociation of the Zn(2+) site, which is simultaneous to alterations on the secondary structure. Upon cooling, an apo-ferredoxin state is obtained, with characteristics of a molten globule: compactness identical to the native form; similar secondary structure evidenced by far-UV CD; no near-UV CD detected tertiary contacts; and an exposure of the hydrophobic surface evidenced by 1-anilino naphthalene-8-sulfonic acid (ANS) binding. In contrast to the native form, this apo ferredoxin state undergoes reversible thermal and chemical unfolding. Its conformational stability was investigated by guanidinium chloride denaturation and this state is approximately 1.5 kcal mol(-1) destabilised in respect to the holo ferredoxin. The single tryptophan located nearby the Fe-S pocket probed the conformational dynamics of the molten globule state: fluorescence quenching, red edge emission shift analysis and resonance energy transfer to bound ANS evidenced a restricted mobility and confinement within a hydrophobic environment. The possible physiological relevance of molten globule states in Fe-S proteins and the hypothesis that their structural flexibility may be important to the understanding of metal center insertion are discussed.

Natural Domain Design: Enhanced Thermal Stability of a Zinc-Lacking Ferredoxin Isoform Shows that a Hydrophobic Core Efficiently Replaces the Structural Metal Site

Zinc centers play a key role as important structure determinants in a variety of proteins including ferredoxins (Fd). Here, we exploit the availability of two highly similar ferredoxin isoforms from the thermophile Sulfolobus metallicus, which differ in the residues involved in coordinating a His/Asp zinc site that ties together the protein core with its N-terminal extension, to investigate the effect of the absence of this site on ferredoxin folding. The conformational properties of the zinc-containing (FdA) and zinc-lacking (FdB) isoforms were investigated using visible absorption and tryptophan fluorescence emission. Fluorescence quenching studies, together with comparative modeling and molecular dynamics simulations, indicate that the FdB N-terminal extension assumes a fold identical to that of the Zn(2+)-containing isoform. The thermal stability of the isoforms was investigated in a broad pH range (2 < pH < 10), and at physiological pH conditions, both proteins unfold above 100 degrees C. Surprisingly, the Zn(2+)-lacking isoform was always found to be more stable than its Zn(2+)-containing counterpart: a DeltaT(m) approximately 9 degrees C is determined at pH 7, a difference that becomes even more significant at extreme pH values, reaching a DeltaT(m) approximately 24 degrees C at pH 2 and 10. The contribution of the Zn(2+) site to ferredoxin stability was further resolved using selective metal chelators. During thermal unfolding, the zinc scavenger TPEN significantly lowers the T(m) in FdA ( approximately 10 degrees C), whereas it has no effect in FdB. This shows that the Zn(2+) site contributes to ferredoxin stability but that FdB has devised a structural strategy that accounts for an enhanced stability without using a metal cross-linker. An analysis of the FdB sequence and structural model leads us to propose that the higher stability of the zinc-containing ferredoxin results from van der Waals contacts formed between the residues that occupy the same spatial region where the zinc ligands are found in FdA. These favor the formation of a novel local stabilizing hydrophobic core and illustrate a strategy of natural fold design.

Degradation of small leucine-rich repeat proteoglycans by matrix metalloprotease-13: identification of a new biglycan cleavage site

A major and early feature of cartilage degeneration is proteoglycan breakdown. Matrix metalloprotease (MMP)-13 plays an important role in cartilage degradation in osteoarthritis (OA). This MMP, in addition to initiating collagen fibre cleavage, acts on several proteoglycans. One of the proteoglycan families, termed small leucine-rich proteoglycans (SLRPs), was found to be involved in collagen fibril formation/interaction, with some members playing a role in the OA process. We investigated the ability of MMP-13 to cleave members of two classes of SLRPs: biglycan and decorin; and fibromodulin and lumican. SLRPs were isolated from human normal and OA cartilage using guanidinium chloride (4 mol/l) extraction. Digestion products were examined using Western blotting. The identities of the MMP-13 degradation products of biglycan and decorin (using specific substrates) were determined following electrophoresis and microsequencing. We found that the SLRPs studied were cleaved to differing extents by human MMP-13. Although only minimal cleavage of decorin and lumican was observed, cleavage of fibromodulin and biglycan was extensive, suggesting that both molecules are preferential substrates. In contrast to biglycan, decorin and lumican, which yielded a degradation pattern similar for both normal and OA cartilage, fibromodulin had a higher level of degradation with increased cartilage damage. Microsequencing revealed a novel major cleavage site (... G177/V178) for biglycan and a potential cleavage site for decorin upon exposure to MMP-13. We showed, for the first time, that MMP-13 can degrade members from two classes of the SLRP family, and identified the site at which biglycan is cleaved by MMP-13. MMP-13 induced SLRP degradation may represent an early critical event, which may in turn affect the collagen network by exposing the MMP-13 cleavage site in this macromolecule. Awareness of SLRP degradation products, especially those of biglycan and fibromodulin, may assist in early detection of OA cartilage degradation.

The Sulfolobus solfataricus electron donor partners of thermophilic CYP119: an unusual non-NAD(P)H-dependent cytochrome P450 system

CYP119 from Sulfolobus solfataricus is the first well-characterized thermophilic cytochrome P450 enzyme. The endogenous substrate for this enzyme is not known but it hydroxylates lauric acid in a reaction supported by surrogate mesophilic electron donors. However, reconstitution of a high-temperature catalytic system requires identification of the normal thermophilic electron donor partners of CYP119. Here, we describe cloning, expression in Escherichia coli, and characterization of the requisite electron donor partners from S. solfataricus. One is a thermostable ferredoxin and the second a 2-oxoacid-ferredoxin oxidoreductase that utilizes pyruvic acid rather than NAD(P)H as the source of reducing equivalents. CYP119 is the only cytochrome P450 to date known to obtain electrons from a non-NAD(P)H-dependent protein. The two thermophilic partners have been used to reconstitute a catalytic system that hydroxylates lauric acid at 70 degrees C, and the optimal conditions for this system have been defined. This first high-temperature in vitro catalytic system represents an important step in the development of industrially relevant catalysts.