Introducing selective supercritical fluid extraction as a new tool for determining sorption/desorption behavior and bioavailability of persistent organic pollutants in sediment

Environmental health and risk assessment metrics with special mention to biotransfer, bioaccumulation and biomagnification of environmental pollutants

The environment pollutants, which are landed up in environment because of human activities like urbanization, mining and industrializations, affects human health, plants and animals. The living organisms present in environment are constantly affected by the toxic pollutants through direct contact or bioaccumulation of chemicals from the environment. The toxic and hazardous pollutants are easily transferred to different environmental matrices like land, air and water bodies such as surface and ground waters. This comprehensive review deeply discusses the routes and causes of different environmental pollutants along with their toxicity, impact, occurrences and fate in the environment. Environment health and risk assessment tools that are used to evaluate the harmfulness, exposure of living organisms to pollutants and the amount of pollutant accumulated are explained with help of bio-kinetic models. Biotransfer, toxicity factor, biomagnification and bioaccumulation of different pollutants in the air, water and marine ecosystems are critically addressed. Thus, the presented survey would be collection of correlations those addresses the factors involved in assessing the environmental health and risk impacts of distinct environmental pollutants.

Influence of soil γ-irradiation and spiking on sorption of p,p'-DDE and soil organic matter chemistry

The fate of organic chemicals and their metabolites in soils is often investigated in model matrices having undergone various pre-treatment steps that may qualitatively or quantitatively interfere with the results. Presently, effects associated with soil sterilization by γ-irradiation and soil spiking using an organic solvent were studied in one freshly spiked soil (sterilization prior to contamination) and its field-contaminated (sterilization after contamination) counterpart for the model organic compound 1,1-Dichloro-2,2-bis(4-chlorophenyl)ethene (p,p'-DDE). Changes in the sorption and potential bioavailability of spiked and native p,p'-DDE were measured by supercritical fluid extraction (SFE), XAD-assisted extraction (XAD), and solid-phase microextraction (SPME) and linked to qualitative changes in soil organic matter (SOM) chemistry measured by diffuse reflectance infrared Fourier-transform (DRIFT) spectroscopy. Reduced sorption of p,p´-DDE detected with XAD and SPME was associated more clearly with spiking than with sterilization, but SFE showed a negligible impact. Spiking resulted in an increase of the DRIFT-derived hydrophobicity index, but irradiation did not. Spectral peak height ratio descriptors indicated increasing hydrophobicity and hydrophilicity in pristine soil following sterilization, and a greater reduction of hydrophobic over hydrophilic groups as a consequence of spiking. In parallel, reduced sorption of p,p´-DDE upon spiking was observed. Based on the present samples, γ-irradiation appears to alter soil sorptive properties to a lesser extent when compared to common laboratory processes such as spiking with organic solvents.

Challenges in the Measurement of Antibiotics and in Evaluating Their Impacts in Agroecosystems: A Critical Review

Large quantities of antibiotics are used in agricultural production, resulting in their release to agroecosystems through numerous pathways, including land application of contaminated manure, runoff from manure-fertilized fields, and wastewater irrigation of croplands. Antibiotics and their transformation products (TPs) exhibit a wide range of physico-chemical and biological properties and thus present substantive analytical challenges. Advances in the measurement of these compounds in various environmental compartments (plants, manure, soil, sediment, and water) have uncovered a previously unrealized landscape of antibiotic residues. These advanced multiresidue methods, designed to measure sub-ng g concentrations in complex mixtures, remain limited by the inherent intricacy of the sample matrices and the difficultly in eliminating interferences that affect antibiotic detection. While efficient extraction methods combined with high sensitivity analysis by liquid chromatography/mass spectrometry can provide accurate quantification of antibiotics and their TPs, measured concentrations do not necessarily reflect their bioavailable fractions and effects in the environment. Consequently, there is a need to complement chemical analysis with biological assays that can provide information on bioavailability, biological activity, and effects of mixtures. Enzyme-linked immunosorbent assays (ELISA), often used as screening tools for antibiotic residues, may be useful for detecting the presence of structurally related antibiotic mixtures but not their effects. Other tools, including bioreporter assays, hold promise in measuring bioavailable antibiotics and could provide insights on their biological activity. Improved assessment of the ecological and human health risks associated with antibiotics in agroecosystems requires continued advances in analytical accuracy and sensitivity through improvements in sample preparation, instrumentation, and screening technologies.

Supercritical fluid extraction of persistent organic pollutants from natural and artificial soils and comparison with bioaccumulation in earthworms

Selective supercritical fluid extraction (SSFE) was used as a measurement of compound chemical accessibility and as a predictor of compound bioavailability from three natural soils and artificial analogues prepared to have comparable total organic carbon content. Soils spiked with phenanthrene, pyrene, PCB 153, lindane, and p,p'-DDT were aged for 0, 14, 28, or 56 days and then selectively extracted by supercritical fluid extraction. Compounds exhibited decreasing extractability with increasing pollutant-soil contact time and increasing total organic carbon content in tested soils. However, the different extractability of compounds from artificial and natural pairs having comparable TOC indicates the limitations of using TOC as an extrapolation basis between various soils. The comparison of extractability with bioaccumulation by earthworms (Eisenia fetida) previously published by Vlčková and Hofman (2012) showed that only for PAHs it was possible to predict their bioaccumulation by means of selective SFE.

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water-sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography-mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10(4) l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water-sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.

Investigating differential binding of polychlorinated dibenzo-p-dioxins/dibenzofurans in soil and soil components using selective supercritical fluid extraction

Supercritical fluid extraction (SFE) with pure carbon dioxide was performed at increasingly strong conditions to investigate differential binding of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) in two impacted soils, in their sieved size fractions, and in small (a few mg) samples of industry-related waste products separated from impacted soil. The binding strengths of PCDD/Fs were shown to be different in the two soils, and in their different soil particle size fractions. As might be expected based on surface area considerations, one soil showed the strongest binding in the smallest (<5μm) sieved fraction. However, the other soil showed the strongest binding in the larger sized fractions, possibly indicating that process-related particles could be controlling PCDD/F binding. Selective SFE of various types of particles including black carbon and charcoal (separated from soil), and from a suspected process anode residue did show different PCDD/F binding behavior ranging from quite weak binding (charcoal) to very strong binding (anode particles). Shifts to the stronger SFE fractions in the soils after activated carbon treatment agreed well with the decreases previously found in the uptake of PCDD/Fs by earthworms, as well as decreases in their freely-dissolved aqueous concentrations in soil/water slurries. These results show that, as previously demonstrated for PAHs and PCBs, selective SFE can be a useful tool to investigate differences in PCDD/F binding behaviors in impacted soils and sediments and their component parts, as well as a rapid tool for estimating the effectiveness of activated carbon treatments on decreasing the bioavailability of PCDD/Fs in soils and sediments.

Assessment of supercritical fluid extraction use in whole sediment toxicity identification evaluations

Supercritical fluid extraction (SFE) with pure CO(2) was assessed as a confirmatory tool in phase III of whole sediment toxicity identification evaluations (TIEs). The SFE procedure was assessed on two reference sediments and three contaminated sediments by using a combination of toxicological and chemical measurements to quantify effectiveness. Sediment toxicity pre- and post-SFE treatment was quantified with a marine amphipod (Ampelisca abdita) and mysid (Americamysis bahia), and nonionic organic contaminants (NOCs) polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were measured in sediments, overlying waters, and interstitial waters. In general, use of SFE with the reference sediments was successful, with survival averaging 91% in post-SFE treatments. Substantial toxicity reductions and contaminant removal from sediments and water samples generated from extracted sediments of up to 99% in two of the contaminated sediments demonstrated SFE effectiveness. Furthermore, toxicological responses for these SFE-treated sediments showed comparable results to those from the same sediments treated with the powdered coconut charcoal addition manipulation. These data demonstrated the utility of SFE in phase III of a whole sediment TIE. Conversely, in one of the contaminated sediments, the SFE treatments had no effect on sediment toxicity, whereas sediment concentrations of PCBs and PAHs were reduced. We propose that, for some sediments, the SFE treatment may result in the release of otherwise nonbioavailable cationic metals that subsequently cause toxicity to test organisms. Overall, SFE treatment was found to be effective for reducing the toxicity and concentrations of NOCs in some contaminated sediments. However, these studies suggest that SFE treatment may enhance toxicity with some sediments, indicating that care must be taken when applying SFE and interpreting the results.

Decontamination of hazardous substances from solid matrices and liquids using supercritical fluids extraction: a review

Supercritical fluid has been adopted as an extraction media to remove various kinds of substances from distinct types of solid matrices since three decades ago. Compared to conventional extraction mode, supercritical fluid extraction technology is preferred because of the flexibility in adjusting its dissolving power and inherent elimination of organic solvent which means reducing time and money needed for subsequent purification. Utilization of this method as an environmental remedial technology, however, has become a trend only after its accomplishment in analytical chemistry was acknowledged. This review tries to summarize in a comprehensive manner the multitude aspects involved in hazardous compounds removal from miscellaneous class of environmental matrices. The industrial adsorbent regeneration using supercritical fluid technology is also discussed. Although, this technology has been successfully realized for environmental remediation in laboratory and on pilot-plant scale, its commercialization attempts still lack significant technology improvement in order to reach the economic feasibility.

PAH desorption from river floodplain soils using supercritical fluid extraction

Sequential supercritical fluid extraction (SFE) was performed in order to estimate desorption of PAHs from river floodplain soils which contain coal and coal-derived particles. Original soils, soils' light fractions (rho<2 g cm(-3)), and <63 microm fractions were studied for PAHs' desorption kinetics. Desorption data were successfully described using a two-site model. Desorption rate constants were one order of magnitude lower than those of "slow" and "very slow" desorption rates from other studies. This suggests very slow and extremely slow desorption. Estimated time scales releasing 99% of total extractable contaminants ranged from decades for 2-4-ring PAHs and hundreds of years for 5-6-ring PAHs. We demonstrate that, despite high soil PAH concentrations which are due to coal and coal-derived particles, the general environmental risk is reduced by the very slow and extremely slow desorption rates.

Using supercritical fluid extraction to measure the desorption and bioaccessibility of phenanthrene in soils

The aim of this paper was to measure the changing desorbable fraction and bioaccessibility of phenanthrene in two different soils with increasing soil-phenanthrene contact time using supercritical fluid extractions (SFE). Both soils were spiked with 100 mg kg(-1) phenanthrene and aged for 28d. Desorption profiles were measured every 7d using selective SFE conditions and the results were compared to 14C-phenanthrene mineralisation assays. Selective SFE showed significant differences in the rates and extents of desorption in the two soils, likely to be due to different organic matter composition. Post-extraction fitting of data yielded consistent SFE extraction times within ageing soils for bioaccessibility prediction.

Determination (monitoring) of PAHs in surface waters: why an operationally defined procedure is needed

The results of interlaboratory studies on the determination of selected PAHs in samples of pure water and water containing suspended matter are presented and discussed in this study. Determinations were performed by independent analytical laboratories which used different sample-preparation procedures, i.e. liquid-liquid extraction and solid-phase extraction with columns and speedisks. The study indicates that the results of PAHs determination depend on the type of isolation technique and the final determination procedure used by a given laboratory. Differences among the determined concentrations of specific PAHs reached 700%. In this work it has been shown that modern analysis does not offer isolation techniques for PAHs which would secure their speciation in the aquatic environment.

Desorption of BTEX from activated charcoal using accelerated solvent extraction: evaluation of occupational exposures

A procedure for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene (BTEX) in occupational environments is proposed. These compounds are extracted from activated charcoal using accelerated solvent extraction. Operational parameters are optimized and quantitative recovery is obtained using acetonitrile as the extraction solvent and 1-mL extraction cells, a preheat time of 2 min, a temperature of 160 degrees C, a pressure of 1,500 psi, a static period of 5 min, a flush volume of 110%, two cycles and a purge time of 90 s. Determination of BTEX compounds is carried out by gas chromatography using a flame ionization detector. The recoveries, obtained for a confidence level of 95%, are 91 +/- 4, 100 +/- 3, 104 +/- 2, 93 +/- 4, 99 +/- 2 and 99 +/- 2% for benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene, respectively. The detection limits are 0.5 microg for benzene, 0.7 microg for toluene and 1.0 microg for the other compounds. The proposed procedure has been applied to real samples collected in several workplaces, like a microbiology laboratory, an analytical chemistry laboratory, a printer's, a car repair shop and a petrol station. From the results obtained, it can be concluded that the occupational exposures determined are always acceptable because they are lower than the tenth part of the recommended exposure limits (VLA-ED and VLA-EC).

Linking organic pollutant (bio)availability with geosorbent properties and biomimetic methodology: a review of geosorbent characterisation and (bio)availability prediction

The interdependent link between structure and physico-chemical properties of geosorbents and sorption activity of hydrophobic organic pollutants (HOC) upon interaction with solid matrices has been established. The conclusions derived from these investigations have not been actively incorporated into risk assessment and remediation protocols since legislators prefer to adopt a conservative approach when the potential of contaminants to be released from soil matrices are evaluated. With the advent of spectroscopic techniques, it is possible to determine the molecular properties of the geosorbent organic matter which play a pivotal role in HOC retention. Physical-chemical and biological methods are employed to predict the potential for HOC release from sorbent matrices. This article serves as a review discussing the literature and reports the progress that has been made in these particular areas. The implication of employing molecular descriptor factors correlated with a biomimetic method to assess availability and risk is also considered.

Measuring bioavailability of polychlorinated biphenyls in soil to earthworms using selective supercritical fluid extraction

If the release mechanisms during selective chemical extraction of persistent organic pollutants (POP) mimic release mechanisms in natural systems during biological uptake, then a selective non-exhaustive extraction could give a quantitative measure of the bioavailable POP fraction. Supercritical fluid extraction (SFE) is suggested as a possible technique to estimate the amount of bioavailable polychlorinated biphenyls (PCBs) at contaminated sites and hence serve as a new tool in risk assessment. The uptake of PCBs by earthworm (Eisenia foetida) was investigated. PCB contaminated soil was pre-extracted with selective non-exhaustive SFE (50 degrees C, 350 bar, 1h), which removed on average 70% of the individual PCBs. Earthworms were placed in this pre-extracted soil, as well as in untreated soil. After 10 days, the PCB uptake by earthworms in the two systems was compared. The bioaccumulation factor (BAF) was 83% lower in the pre-extracted system than in the untreated system, demonstrating that SFE extracts primarily bioavailable contaminants. From the data, the bioavailable fraction could also be calculated to be 75%, which is very close to the 70% removed by SFE under the applied conditions. This suggests that the chemical methodology is capable of measuring the bioavailable fraction very accurately in this system.

Freely dissolved pore water concentrations and sorption coefficients of PAHs in spiked, aged, and field-contaminated soils

Freely dissolved aqueous concentrations in the soil pore water represent an important aspect of bioavailability and risk assessment of contaminated soils. In this study, a negligible depletive partitioning based sampling technique was validated and applied to measure free concentrations of polycyclic aromatic hydrocarbons (PAHs) in spiked, aged and field-contaminated soils. Detailed kinetic studies were performed to select appropriate equilibration times. Freely dissolved aqueous concentrations in the pore water were compared to total concentrations, and sorption coefficients were calculated. Results show that equilibrium partition models can predict sorption coefficients of freshly spiked and lab-aged soils rather accurately. However, freely dissolved pore water concentrations of field-contaminated soils are orders of magnitude lower than model predictions. Consequently, environmental risks can be highly overestimated with these models. The simple and sensitive partitioning-based sampling technique used in this study, could, therefore, be applicable to improve site-specific risk assessment of field-contaminated soils.

Optimization of supercritical fluid extraction of pesticide residues in soil by means of central composite design and analysis by gas chromatography–tandem mass spectrometry

An environmentally friendly methodology is proposed for the analysis of pesticides in soil samples based on supercritical fluid extraction (SFE) and analysis at high selectivity and sensitivity, by gas chromatography-tandem mass spectrometry (GC-MS-MS). The pesticides investigated are among the most commonly used in intensive horticulture activities comprising organochlorine and organophosphorous insecticides, triazine and acetanilide herbicides, amongst others. An experimental design approach was used for modelling SFE and optimised extraction conditions were derived for the total pesticides extraction or for specific sub-groups of interest. Pesticide residues could be detected in soils in the sub-ppb range (0.1-3.7microgkg(-1)), with quite good precision (4.2-15.7%) and extraction efficiency (80.4-106.5%). The analysis of soil samples from an intensive horticulture area in Póvoa de Varzim, north of Portugal, revealed the presence of persistent pesticides, parent compounds and degradation products among the following: endosulfan, endosulfan sulfate, dieldrin, 4,4'-DDE, 4,4'-DDD, atrazine, alachlor, metolachlor, chlorpyrifos, pendimethalin and lindane. The important features to point out are the easy interpretation of chromatograms and straightforward confirmation of analytes that greatly facilitates the analyst judgement on the contamination of the sample.

Selective supercritical fluid extraction to identify aged sediment-bound PCBs available for uptake by eel

A naturally contaminated sediment was partially extracted with selective supercritical fluid extraction (SFE) to remove a fraction of supposedly bioavailable PCBs from the matrix. Eels (Anguilla anguilla) were cultured in systems with untreated and pre-extracted sediment, respectively, and it was shown that the SFE treatment selectively removed bioavailable PCBs from the sediment, since relative biota-to-sediment accumulation factors (BSAFs) for the eight studied PCB congeners were much lower in the pre-extracted than in the untreated system at the end of the study. Relative BSAF values decreased with about the same relative amount for all eight congeners, independent of the degree of chlorination and the initial concentration in the sediment. The results demonstrate the ability of SFE to selectively remove sediment-bound PCBs that are available for uptake by the eels, thus demonstrating the feasibility of using selective SFE to estimate bioavailability of PCBs in sediments.

Uptake and bioavailability of persistent organic pollutants by plants grown in contaminated soil

This paper assesses the uptake of persistent organic pollutants (POP's) into plants. In particular, uptake of alpha-endosulfan, beta-endosulfan and endosulfan sulfate from lettuce. The lettuce plants were grown on compost that had previously been contaminated at 10 and 50 microg g(-1) per POP. The soil was slurry spiked by adding the appropriate amount of POP in acetone in an approximate ratio of 1 ratio 2, w/v soil ratio solvent. The solvent was left to evaporate at ambient temperature for 24 hours. Lettuce plants were grown under artificial daylight for 12 hours a day. The influence of soil ageing on the recovery of POP's from spiked soil samples was also assessed. The average recovery of endosulfan compounds from slurry spiked soil (10, 20 and 40 microg g(-1)) was consistent (92.9 +/- 4.4% for n= 9). However, ageing of endosulfan compounds on the slurry spiked soil resulted in lower recoveries (average losses were 12.5% after 14 days ageing of slurry spiked soil). The uptake of POP's was assessed by measuring the amount of endosulfan compounds in roots and leaves from lettuce plants after 10, 20 and 33 days. In addition, control plants grown in uncontaminated soil were monitored and analysed. It was found that endosulfan compounds were present in the roots of all lettuce plants irrespective of soil spike level or age of plant. In the 33 day lettuce plants where the soil was spiked at the highest level (50 microg g(-1)) endosulfan compounds were determined in the leaves. The root to leaf ratio was found to be 3.1 for alpha-endosulfan, 46.0 for beta-endosulfan, and 24.3 for endosulfan sulfate. Spiked lettuce samples were subjected to in vitro gastrointestinal extraction to assess the bioavailability of endosulfan compounds. No detectable endosulfan compounds were determined in the gastric extracts while small quantities (range 0.06-0.12 microg g(-1)) were found in the intestinal extraction. All samples (soil and lettuce) were extracted using pressurised fluid extraction and analysed using gas chromatography with mass selective detection.

Extremely slowly desorbing polycyclic aromatic hydrocarbons from soot and soot-like materials: evidence by supercritical fluid extraction

Combustion-derived PAHs are strongly sorbed to their particulate carrier (i.e., soot, charcoal), and therefore, very slow desorption kinetics of the chemicals might be anticipated. Measurements are however lacking, because conventional methods (Tenax, XAD, gas-purging) fail to accurately determine desorption kinetics due to practical problems. In this study, we used a mild supercritical fluid extraction (SFE) method, which mimics desorption into water and circumvents these problems, to quantify desorption kinetics of 13 native PAHs from pure charcoal, coal, and four types of soot. The results show that generally only very small PAH fractions are released. Desorption behavior was, however, not related to common sorbent/sorbate characteristics. Two-site model-derived "fast desorbing fractions" were <0.01 in the majority of cases, and for the dominant "slow sites", the calculated rate constants for desorption into water measured from 10(-7) to 10(-5) h(-1). These data suggest that desorption of coal and combustion-derived PAHs can be even slower than the "very slow" desorption observed in sediments. Estimated time scales required for removal of pyrogenic PAHs from these extremely slow sites into water amount to several millennia. Our results imply reduced chemical risks for soot and soot-like materials, casting doubts on current risk assessment procedures and environmental quality standards of pyrogenic PAHs.

Selective supercritical fluid extraction as a tool for determining the PCB fraction accessible for uptake by chironomid larve in a limnic sediment

Selective supercritical fluid extraction (SFE) at 40 degrees C, 400 bar and 60 min was used to selectively remove bioavailable PCBs from a naturally contaminated limnic sediment. The extraction decreased the sediment concentrations of the nine studied PCBs by 54% (on average). Chironomid larvae were thereafter cultured in pre-extracted sediment as well as in untreated sediment to study the differences in uptake of PCBs in the two cultures. While the prevailing equilibrium partitioning (EqP) theory predicts a 54% decrease in PCB uptake by the chironomids in the pre-extracted sediment, with a maintained biota-to-sediment accumulation factor (BSAF), a decrease in PCB uptake by 91% was observed. For all investigated PCBs the BSAFs were on average 81% lower in the cultures with pre-extracted sediment than in the untreated systems. The data allowed for a calculation of the bioavailable fraction, which was estimated to 60%. This is very close to the 54% removed by selective SFE, demonstrating the possibility of using SFE as a tool to determine the bioavailable PCB fraction in a polluted sediment.

Sequential supercritical fluid extraction (SSFE) for estimating the availability of high molecular weight polycyclic aromatic hydrocarbons in historically polluted soils

Sequential supercritical fluid (CO2) extraction (SSFE) was applied to eight historically contaminated soils from diverse sources with the aim to elucidate the sorption-desorption behavior of high molecular weight polycyclic aromatic hydrocarbons (PAHs). The method involved five extraction phases applying successively harsher conditions by increasing fluid temperature and density mobilizing target compounds from different soil particle sites. Two groups of soils were identified based on readily desorbing (available) PAH fractions obtained under mildest extraction conditions (e.g., readily desorbing fractions of fluoranthene and pyrene significantly varied between the soils ranging from <10 to >90%). Moreover, extraction behavior strongly correlated with molecular weight revealing decreasing available PAH fractions with increasing weight. Physicochemical soil parameters such as particle size distribution and organic dry mass were found to have no distinct effect on the sorption-desorption behavior of PAHs in the different soils. However, PAH profiles significantly correlated with readily available pollutant fractions; soils with relatively less mobile PAHs had higher proportions of five- and six-ring PAHs and vice versa. Eventually, biodegradability corresponded well with PAH recoveries under the two mildest extraction phases. However, a quantitative relationship was only established for soils with biodegradable PAHs. Out of eight soils, five showed no biodegradation including the four soils with the lowest fraction of readily desorbing PAHs. Only one soil (which was found to be highly toxic to Vibrio fischeri) did not match the overall pattern showing no PAH biodegradability but large fractions of highly mobile PAHs, concluding that mass transfer limitations may only be one of many factors governing biodegradability of PAHs.

Validation of procedures to quantify nonextractable polycyclic aromatic hydrocarbon residues in soil

This study was conducted to optimize butanol solvent shake extraction, dichloromethane soxtec extraction, and methanolic saponification extraction for the selective extraction of aged polycyclic aromatic hydrocarbons from soil. Extraction kinetics for these methods was established to determine the optimal time necessary to achieve exhaustive compound extraction. This resulted in times of 12, 6, and 5 h, respectively, for butanol, dichloromethane, and saponification, to extract polycyclic aromatic hydrocarbons from previously spiked, then aged soil. Increasing the soil mass to butanol volume ratio reduced the proportion of polycyclic aromatic hydrocarbon extracted by butanol, highlighting the importance of determining and maintaining a constant soil to solvent ratio for comparative purposes. Drying soil samples before dichloromethane soxtec extraction reduced by 30 to 76% the amount of polycyclic aromatic hydrocarbons extracted. The effect of sample drying is discussed with relevance to enhancing the formation of nonextractable compounds in soil and compound losses previously assumed by volatilization. The optimized extraction procedures provided low variability with relative standard deviations < or = 5.2% for analysis of multiple replicates. The results obtained by the optimized procedures provided equivalent or improved reproducibility to those obtained by other methods reported in the literature.

Development of a simple selective SFE method for the determination of desorption behaviour of PCBs in two Swedish sediments

A simple selective supercritical fluid extraction (SFE) method was developed for the determination of desorption behaviour of PCBs in sediments. This method was applied to determine the distribution of individual PCB congeners among sites of differing bonding strengths in two Swedish sediments (Lake Järnsjön and Baltic bay Orserumsviken). Four different PCB fractions were distinguished in each sediment by applying consecutively harsher supercritical fluid extraction conditions on the same sample. Even though the two sediments had completely different textures, they showed very similar extraction behaviour. It was shown that, in both sediments, a major part of the PCBs (58% and 65%, respectively) were located at "fast sites", from which they were extractable already with the mildest extraction conditions (60 min, 40 degrees C and 120 bar). Only a small fraction of the PCBs were so tightly bound to the sediments (located at "slow sites"), that they could be extracted only under the harshest conditions (60 min, 150 degrees C and 400 bar). Information of this kind should be of great value for the determination of bioavailability of pollutants in sediments and soils, and it is the author's belief that this technique has the potential to develop into a powerful tool in environmental risk assessment.