Central neuronal synapse formation on micropatterned surfaces

Expression Pattern of 5-HT (Serotonin) Receptors during Normal Development of the Human Spinal Cord and Ganglia and in Fetus with Cervical Spina Bifida

The expression of 5-HT (serotonin) receptors (sr) was analyzed in the spinal cord and ganglia of 15 human conceptuses (5–10-weeks), and in the 9-week fetus with spina bifida. We used immunohistochemical method to detect sr-positive, apoptotic (caspase-3) and proliferating (Ki-67) cells, double immunofluorescence for co-localization with protein gene peptide (pgp) 9.5 and GFAP, as well as semiquantification and statistical measurements. Following the neurulation process, moderate (sr1 and sr2) and mild (sr3) expression characterized neuroblasts in the spinal cord and ganglia. During further development, sr1 expression gradually increased in the motoneurons, autonomic and sensory neurons, while sr2 and sr3 increased strongly in floor and roof plates. In the ganglia, sr3 expression increased during limited developmental period, while sr1 and sr2 increased throughout the investigated period. Co-expression of sr/pgp 9.5 characterized developing neurons, while sr/GFAP co-localized in the roof plate. In the spinal cord and ganglia of malformed fetus, weaker sr1 and sr2 and stronger sr3 expression accompanied morphological abnormalities. Anomalous roof plate morphology showed an excess of apoptotic and proliferating cells and increased sr3 expression. Our results indicate a human-species specific sr expression pattern, and the importance of sr1 in neuronal differentiation, and sr2 and sr3 in the control of the roof plate morphogenesis in normal and disturbed development.

Compartmentalized Platforms for Neuro-Pharmacological Research

Dissociated primary neuronal cell culture remains an indispensable approach for neurobiology research in order to investigate basic mechanisms underlying diverse neuronal functions, drug screening and pharmacological investigation. Compartmentalization, a widely adopted technique since its emergence in 1970s enables spatial segregation of neuronal segments and detailed investigation that is otherwise limited with traditional culture methods. Although these compartmental chambers (e.g. Campenot chamber) have been proven valuable for the investigation of Peripheral Nervous System (PNS) neurons and to some extent within Central Nervous System (CNS) neurons, their utility has remained limited given the arduous manufacturing process, incompatibility with high-resolution optical imaging and limited throughput. The development in the area of microfabrication and microfluidics has enabled creation of next generation compartmentalized devices that are cheap, easy to manufacture, require reduced sample volumes, enable precise control over the cellular microenvironment both spatially as well as temporally, and permit highthroughput testing. In this review we briefly evaluate the various compartmentalization tools used for neurobiological research, and highlight application of the emerging microfluidic platforms towards in vitro single cell neurobiology.

Unidirectional signal propagation in primary neurons micropatterned at a single-cell resolution

The structure and connectivity of cultured neuronal networks can be controlled by using micropatterned surfaces. Here, we demonstrate that the direction of signal propagation can be precisely controlled at a single-cell resolution by growing primary neurons on micropatterns. To achieve this, we first examined the process by which axons develop and how synapses form in micropatterned primary neurons using immunocytochemistry. By aligning asymmetric micropatterns with a marginal gap, it was possible to pattern primary neurons with a directed polarization axis at the single-cell level. We then examined how synapses develop on micropatterned hippocampal neurons. Three types of micropatterns with different numbers of short paths for dendrite growth were compared. A normal development in synapse density was observed when micropatterns with three or more short paths were used. Finally, we performed double patch clamp recordings on micropatterned neurons to confirm that these synapses are indeed functional, and that the neuronal signal is transmitted unidirectionally in the intended orientation. This work provides a practical guideline for patterning single neurons to design functional neuronal networks in vitro with the direction of signal propagation being controlled.

Neuronal electrophysiological function and control of neurite outgrowth on electrospun polymer nanofibers are cell type dependent

Modeling of cellular environments with nanofabricated biomaterial scaffolds has the potential to improve the growth and functional development of cultured cellular models, as well as assist in tissue engineering efforts. An understanding of how such substrates may alter cellular function is critical. Highly plastic central nervous system hippocampal cells and non-network forming peripheral nervous system dorsal root ganglion (DRG) cells from embryonic rats were cultured upon laminin-coated degradable polycaprolactone (PCL) and nondegradable polystyrene (PS) electrospun nanofibrous scaffolds with fiber diameters similar to those of neuronal processes. The two cell types displayed intrinsically different growth patterns on the nanofibrous scaffolds. Hippocampal neurites grew both parallel and perpendicular to the nanofibers, a property that would increase neurite-to-neurite contacts and maximize potential synapse development, essential for extensive network formation in a highly plastic cell type. In contrast, non-network-forming DRG neurons grew neurites exclusively along fibers, recapitulating the simple direct unbranching pathway between sensory ending and synapse in the spinal cord that occurs in vivo. In addition, the two primary neuronal types showed different functional capacities under patch clamp testing. The substrate composition did not alter the neuronal functional development, supporting electrospun PCL and PS as candidate materials for controlled cellular environments in culture and electrospun PCL for directed neurite outgrowth in tissue engineering applications.

Carbon nanotubes in neuroregeneration and repair

In the last decade, we have experienced an increasing interest and an improved understanding of the application of nanotechnology to the nervous system. The aim of such studies is that of developing future strategies for tissue repair to promote functional recovery after brain damage. In this framework, carbon nanotube based technologies are emerging as particularly innovative tools due to the outstanding physical properties of these nanomaterials together with their recently documented ability to interface neuronal circuits, synapses and membranes. This review will discuss the state of the art in carbon nanotube technology applied to the development of devices able to drive nerve tissue repair; we will highlight the most exciting findings addressing the impact of carbon nanotubes in nerve tissue engineering, focusing in particular on neuronal differentiation, growth and network reconstruction.

Added astroglia promote greater synapse density and higher activity in neuronal networks

Astroglia are known to potentiate individual synapses, but their contribution to networks is unclear. Here we examined the effect of adding either astroglia or media conditioned by astroglia on entire networks of rat hippocampal neurons cultured on microelectrode arrays. Added astroglia increased spontaneous spike rates nearly two-fold and glutamate-stimulated spiking by six-fold, with desensitization eliminated for bath addition of 25 microM glutamate. Astrocyte-conditioned medium partly mimicked the effects of added astroglia. Bursting behavior was largely unaffected by added astroglia except with added glutamate. Addition of the GABA(A) receptor antagonist bicuculline also increased spike rates but with more subtle differences between networks without or with added astroglia. This indicates that networks without added astroglia were inhibited greatly. In all conditions, the log-log distribution of spike rates fit well to linear distributions over three orders of magnitude. Networks with added astroglia shifted consistently toward higher spike rates. Immunostaining for GFAP revealed a linear increase with added astroglia, which also increased neuronal survival. The increased spike rates with added astroglia correlated with a 1.7-fold increase in immunoreactive synaptophysin puncta, and increases of six-fold for GABA(Abeta), two-fold for NMDA-R1 and two-fold for Glu-R1 puncta, with receptor clustering that indicated synaptic scaling. Together, these results indicate that added astroglia increase the density of synapses and receptors, and facilitate higher spike rates for many elements in the network. These effects are reproduced by glia-conditioned media, with the exception of glutamate-mediated transmission.

Highly ordered large-scale neuronal networks of individual cells - toward single cell to 3D nanowire intracellular interfaces

The use of artificial, prepatterned neuronal networks in vitro is a promising approach for studying the development and dynamics of small neural systems in order to understand the basic functionality of neurons and later on of the brain. The present work presents a high fidelity and robust procedure for controlling neuronal growth on substrates such as silicon wafers and glass, enabling us to obtain mature and durable neural networks of individual cells at designed geometries. It offers several advantages compared to other related techniques that have been reported in recent years mainly because of its high yield and reproducibility. The procedure is based on surface chemistry that allows the formation of functional, tailormade neural architectures with a micrometer high-resolution partition, that has the ability to promote or repel cells attachment. The main achievements of this work are deemed to be the creation of a large scale neuronal network at low density down to individual cells, that develop intact typical neurites and synapses without any glia-supportive cells straight from the plating stage and with a relatively long term survival rate, up to 4 weeks. An important application of this method is its use on 3D nanopillars and 3D nanowire-device arrays, enabling not only the cell bodies, but also their neurites to be positioned directly on electrical devices and grow with registration to the recording elements underneath.

Cell patterning using a template of microstructured organosilane layer fabricated by vacuum ultraviolet light lithography

Micropatterning techniques have become increasingly important in cellular biology. Cell patterning is achieved by various methods. Photolithography is one of the most popular methods, and several light sources (e.g., excimer lasers and mercury lamps) are used for that purpose. Vacuum ultraviolet (VUV) light that can be produced by an excimer lamp is advantageous for fabricating material patterns, since it can decompose organic materials directly and efficiently without photoresist or photosensitive materials. Despite the advantages, applications of VUV light to pattern biological materials are few. We have investigated cell patterning by using a template of a microstructured organosilane layer fabricated by VUV lithography. We first made a template of a microstructured organosilane layer by VUV lithography. Cell adhesive materials (poly(d-lysine) and polyethyleneimine) were chemically immobilized on the organosilane template, producing a cell adhesive material pattern. Primary rat cardiac and neuronal cells were successfully patterned by culturing them on the pattern substrate. Long-term culturing was attained for up to two weeks for cardiac cells and two months for cortex cells. We have discussed the reproducibility of cell patterning and made suggestions to improve it.

Accelerated neuritogenesis and maturation of primary spinal motor neurons in response to nanofibers

Neuritogenesis, neuronal polarity formation, and maturation of axons and dendrites are strongly influenced by both biochemical and topographical extracellular components. The aim of this study was to elucidate the effects of polylactic acid electrospun fiber topography on primary motor neuron development, because regeneration of motor axons is extremely limited in the central nervous system and could potentially benefit from the implementation of a synthetic scaffold to encourage regrowth. In this analysis, we found that both aligned and randomly oriented submicron fibers significantly accelerated the processes of neuritogenesis and polarity formation of individual cultured motor neurons compared to flat polymer films and glass controls, likely due to restricted lamellipodia formation observed on fibers. In contrast, dendritic maturation and soma spreading were inhibited on fiber substrates after 2 days in vitro. This study is the first to examine the effects of electrospun fiber topography on motor neuron neuritogenesis and polarity formation. Aligned nanofibers were shown to affect the directionality and timing of motor neuron development, providing further evidence for the effective use of electrospun scaffolds in neural regeneration applications.

Membrane nanotubes drawn by optical tweezers transmit electrical signals between mammalian cells over long distances

Biological cells continuously change shape allowing essential functions such as cell motility, vesicle-mediated release/uptake of soluble and membrane components or nanotube-mediated cell-cell communications. Here we use single cell micromanipulation to induce functional changes of cell shape for nanobiotechnological applications. Optical tweezers are focused on the plasma membrane of living cells to pull membrane nanotubes of approximately 200 nanometre diameters and 100 micrometre lengths. Upon switching off the laser tweezer membrane nanotubes relax back to the cell surface. Single-exponential relaxation times deliver local mechanical properties of cells' plasma membrane. Nanotubes pulled beyond 100 micrometre tear off and form micrometre-sized vesicles carrying functional membrane receptors and cytoplasmic signaling components. Membrane nanotubes from one cell can be contacted to adjacent cells forming via connexins intercellular electrical connections within seconds in all directions. Our method opens broad applications for multiplexing single-cell analytics to submicrometer/subfemtoliter ranges and for creating artificial intercellular signaling networks, both not attainable by current methodologies.

Patterning N-type and S-type neuroblastoma cells with Pluronic F108 and ECM proteins

Influencing cell shape using micropatterned substrates affects cell behaviors, such as proliferation and apoptosis. Cell shape may also affect these behaviors in human neuroblastoma (NBL) cancer, but to date, no substrate design has effectively patterned multiple clinically important human NBL lines. In this study, we investigated whether Pluronic F108 was an effective antiadhesive coating for human NBL cells and whether it would localize three NBL lines to adhesive regions of tissue culture plastic or collagen I on substrate patterns. The adhesion and patterning of an S-type line, SH-EP, and two N-type lines, SH-SY5Y and IMR-32, were tested. In adhesion assays, F108 deterred NBL adhesion equally as well as two antiadhesive organofunctional silanes and far better than bovine serum albumin. Patterned stripes of F108 restricted all three human NBL lines to adhesive stripes of tissue culture plastic. We then investigated four schemes of applying collagen and F108 to different regions of a substrate. Contact with collagen obliterates the ability of F108 to deter NBL adhesion, limiting how both materials can be applied to substrates to produce high fidelity NBL patterning. This patterned substrate design should facilitate investigations of the role of cell shape in NBL cell behavior.

Micro- and nanoscale control of the cardiac stem cell niche for tissue fabrication

Advances in stem cell (SC) biology have greatly enhanced our understanding of SC self-renewal and differentiation. Both embryonic and adult SCs can be differentiated into a great variety of tissue cell types, including cardiac myocytes. In vivo studies and clinical trials, however, have demonstrated major limitations in reconstituting the myocardium in failing hearts. These limitations include precise control of SC proliferation, survival and phenotype both prior and subsequent to transplantation and avoidance of serious adverse effects such as tumorigenesis and arrhythmias. Micro- and nanoscale techniques to recreate SC niches, the natural environment for the maintenance and regulation of SCs, have enabled the elucidation of novel SC behaviors and offer great promise in the fabrication of cardiac tissue constructs. The ability to precisely manipulate the interface between biopolymeric scaffolds and SCs at in vivo scale resolutions is unique to micro- and nanoscale approaches and may help overcome limitations of conventional biological scaffolds and methods for cell delivery. We now know that micro- and nanoscale manipulation of scaffold composition, mechanical properties, and three-dimensional architecture have profound influences on SC fate and will likely prove important in developing the next generation of "transplantable SC niches" for regeneration of heart and other tissues. In this review, we examine two key aspects of micro- and nanofabricated SC-based cardiac tissue constructs: the role of scaffold composition and the role of scaffold architecture and detail how recent work in these areas brings us closer to clinical solutions for cardiovascular regeneration.

Triangular neuronal networks on microelectrode arrays: an approach to improve the properties of low-density networks for extracellular recording

Multi-unit recording from neuronal networks cultured on microelectrode arrays (MEAs) is a widely used approach to achieve basic understanding of network properties, as well as the realization of cell-based biosensors. However, network formation is random under primary culture conditions, and the cellular arrangement often performs an insufficient fit to the electrode positions. This results in the successful recording of only a small fraction of cells. One possible approach to overcome this limitation is to raise the number of cells on the MEA, thereby accepting an increased complexity of the network. In this study, we followed an alternative strategy to increase the portion of neurons located at the electrodes by designing a network in confined geometries. Guided settlement and outgrowth of neurons is accomplished by taking control over the adhesive properties of the MEA surface. Using microcontact printing a triangular two-dimensional pattern of the adhesion promoter poly-D-lysine was applied to the MEA offering a meshwork that at the same time provides adhesion points for cell bodies matching the electrode positions and gives frequent branching points for dendrites and axons. Low density neocortical networks cultivated under this condition displayed similar properties to random networks with respect to the cellular morphology but had a threefold higher electrode coverage. Electrical activity was dominated by periodic burst firing that could pharmacologically be modulated. Geometry of the network and electrical properties of the patterned cultures were reproducible and displayed long-term stability making the combination of surface structuring and multi-site recording a promising tool for biosensor applications.

Transdifferentiation of bone marrow stromal cells into cholinergic neuronal phenotype: a potential source for cell therapy in spinal cord injury

BACKGROUND AIMS

Cholinergic neurons are very important cells in spinal cord injuries because of the deficits in motor, autonomic and sensory neurons. In this study, bone marrow stromal cells (BMSC) were evaluated as a source of cholinergic neurons in a rat model of contusive spinal cord injury.

METHODS

BMSC were isolated from adult rats and transdifferentiated into cholinergic neuronal cells. The BMSC were pre-induced with beta-mercaptoethanol (BME), while the induction was done with nerve growth factor (NGF). Neurofilament (NF)-68, -160 and -200 immunostaining was used for evaluating the transdifferentiation of BMSC into a neuronal phenotype. NeuroD expression, a marker for neuroblast differentiation, and Oct-4 expression, a marker for stemness, were evaluated by reverse transcriptase (RT)-polymerase chain reaction (PCR). Choline acetyl transferase (ChAT) immunoreactivity was used for assessing the cholinergic neuronal phenotype. Anti-microtubule-associated protein-2 (MAP-2) and anti-synapsin I antibodies were used as markers for the tendency for synptogenesis. Finally, the induced cells were transplanted into the contused spinal cord and locomotion was evaluated with the Basso-Beattie-Bresnahan (BBB) test.

RESULTS

At the induction stage, there was a decline in the expression of NF-68 associated with a sustained increase in the expression of NF-200, NF-160, ChAT and synapsin I, whereas MAP-2 expression was variable. Transplanted cells were detected 6 weeks after their injection intraspinally and were associated with functional recovery.

CONCLUSIONS

The transdifferentiation of BMSC into a cholinergic phenotype is feasible for replacement therapy in spinal cord injury.

Hybrid synapse formation between spinal motoneurons and superior cervical ganglion neurons in vitro: a study of the functional reconstruction of visceral organs

Spinal motoneurons (SMNs) were co-cultured with labeled superior cervical ganglion neurons (SCGNs) in complete medium on coverslips prepared by the microisland technique. "Hybrid" synapses formation between SMNs and SCGNs was examined by double immunostaining, reverse transcription-polymerase chain reaction (RT-PCR), and electrophysiological assays. The number of synaptic puncta was significantly higher in co-cultured cells compared to controls (P<0.01). Spontaneous synaptic currents (SSCs) were also significantly increased in SCGNs within the co-cultured population of cells (P<0.01). These SSCs could be blocked by a specific nicotinic receptor blocker, but not by a glutamate receptor antagonist. These observations clearly demonstrate the functional synapses formation increased in our co-culture system, suggesting that the "hybrid" synapse formation occurred between somatic and automatic neurons. Our data also indicate that acetylcholine and nicotinic receptors may be involved in mediating these processes.

Aligned electrospun nanofibers specify the direction of dorsal root ganglia neurite growth

Nerve injury, a significant cause of disability, may be treated more effectively using nerve guidance channels containing longitudinally aligned fibers. Aligned, electrospun nanofibers direct the neurite growth of immortalized neural stem cells, demonstrating potential for directing regenerating neurites. However, no study of neurite guidance on these fibers has yet been performed with primary neurons. Here, we examined neurites from dorsal root ganglia explants on electrospun poly-L-lactate nanofibers of high, intermediate, and random alignment. On aligned fibers, neurites grew radially outward from the ganglia and turned to follow the fibers upon contact. Neurite guidance was robust, with neurites never leaving the fibers to grow on the surrounding cover slip. To compare the alignment of neurites to that of the nanofiber substrates, Fourier methods were used to quantify the alignment. Neurite alignment, however striking, was inferior to fiber alignment on all but the randomly aligned fibers. Neurites on highly aligned substrates were 20 and 16% longer than neurites on random and intermediate fibers, respectively. Schwann cells on fibers assumed a very narrow morphology compared to those on the surrounding coverslip. The robust neurite guidance demonstrated here is a significant step toward the use of aligned, electrospun nanofibers for nerve regeneration. (c) 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2007.

Primary Neuron/Astrocyte Co-Culture on Polyelectrolyte Multilayer Films: A Template for Studying Astrocyte-Mediated Oxidative Stress in Neurons

We engineered patterned co-cultures of primary neurons and astrocytes on polyelectrolyte multilayer (PEM) films without the aid of adhesive proteins/ligands to study the oxidative stress mediated by astrocytes on neuronal cells. A number of studies have explored engineering co-culture of neurons and astrocytes predominantly using cell lines rather than primary cells owing to the difficulties involved in attaching primary cells onto synthetic surfaces. To our knowledge this is the first demonstration of patterned co-culture of primary neurons and astrocytes for studying neuronal metabolism. In our study, we used synthetic polymers, namely poly(diallyldimethylammoniumchloride) (PDAC) and sulfonated poly(styrene) (SPS) as the polycation and polyanion, respectively, to build the multilayers. Primary neurons attached and spread preferentially on SPS surfaces, while primary astrocytes attached to both SPS and PDAC surfaces. SPS patterns were formed on PEM surfaces, either by microcontact printing SPS onto PDAC surfaces or vice-versa, to obtain patterns of primary neurons and patterned co-cultures of primary neurons and astrocytes. We further used the patterned co-culture system to study the neuronal response to elevated levels of free fatty acids as compared to the response in separated monoculture by measuring the level of reactive oxygen species (ROS; a widely accepted marker of oxidative stress). The elevation in the ROS levels was observed to occur earlier in the patterned co-culture system than in the separated monoculture system. The results suggest that this technique may provide a useful tool for engineering neuronal co-culture systems, that may more accurately capture neuronal function and metabolism, and thus could be used to obtain valuable insights into neuronal cell function and perhaps even the pathogenesis of neurodegenerative diseases.

Development of an artificial neuronal network with post-mitotic rat fetal hippocampal cells by polyethylenimine

The selection of appropriate surface materials that promote cellular adhesion and growth is an important consideration when designing a simplified neuronal network in vitro. In the past, extracellular matrix proteins such as laminin (LN) or positively charged substances such as poly-l-lysine (PLL) have been used. In this study, we examined the ability of another positively charged polymer, polyethyleneimine (PEI), to promote neuronal adhesion, growth and the formation of a functional neuronal network in vitro. PEI, PLL and LN were used to produce grid-shape patterns on glass coverslips by micro-contact printing. Post-mitotic neurons from the rat fetal hippocampus were cultured on the different polymers and the viability and morphology of these neurons under serum-free culture conditions were observed using fluorescent microscopy and atomic force microscopy (AFM). We show that neurons cultured on the PEI- and PLL-coated surfaces adhered to and extended neurites along the grid-shape patterns, whereas neurons cultured on the LN-coated coverslips clustered into clumps of cells. In addition, we found that the neurons on the PEI and PLL-coated grids survived for more than 2 weeks in serum-free conditions, whereas most neurons cultured on the LN-coated grids died after 1 week. Using AFM, we observed some neurosynapse-like structures near the neuronal soma on PEI-coated coverslips. These findings indicate that PEI is a suitable surface for establishing a functional neuronal network in vitro.

Electrical stimulation-induced cell clustering in cultured neural networks

Planar microelectrode arrays (MEAs) are widely used to record electrical activity from neural networks. However, only a small number of functional recording sites frequently show electrical activity. One contributing factor may be that neurons in vitro receive insufficient synaptic input to develop into fully functional networks. In this study, electrical stimulation was applied to neurons mimicking synaptic input. Various stimulation paradigms were examined. Stimulation amplitude and frequency were tailored to prevent cell death. Two effects of stimulation were observed when 3-week-old cultures were stimulated: (1) clusters of neural cells were observed adjacent to stimulating electrodes and (2) an increase in spontaneous neuronal activity was recorded at stimulating electrodes. Immunocytochemical analysis indicates that stimulation may cause both new neuron process growth as well as astrocyte activation. These data indicate that electrical stimulation can be used as a tool to modify neural networks at specific electrode sites and promote electrical activity.

Neuronal Network Morphology and Electrophysiologyof Hippocampal Neurons Cultured on Surface-Treated Multielectrode Arrays

Toward the development of biocompatible surfaces for implantable electrode arrays and the creation of patterned neuronal networks, the impact of select biochemical substrates [poly-D-lysine (PDL), polyornithine (PO), polyethylenimine (PEI), and a basement membrane extract (BM)] on network morphology and spontaneous electrophysiological activity of dissociated hippocampal neurons was investigated. Cultured in serum-free Neurobasal medium at 100 000 cells/cm(2), neurons attached to each substrate. PDL, PO, and PEI induced little or no neuronal clustering and process fasciculation, whereas the addition of BM promoted these features. The ratios of somas to processes, and axons to dendrites, as determined by immunohistochemical staining and image analysis were comparable across all substrates. Spontaneous firing was recorded using planar multielectrode arrays (MEAs) at the third week in vitro for the two most divergent morphologies according to Euclidian cluster analysis, namely those induced by PO + BM and PEI. Mean spike amplitude, mean firing rate, median interspike interval (ISI), mean burst rate, and correlation index were analyzed and compared to morphological features. Synchronized bursting was highly correlated with neuronal clustering and process fasciculation. Spike amplitude was negatively correlated with thin branching which was most evident in neurons grown on PEI. These data indicate that factors, which influence adherence of neurons to surfaces, can profoundly impact both neuronal network morphology and electrophysiological activity in vitro.

An automated microdrop delivery system for neuronal network patterning on microelectrode arrays

The aim of this work is to present a new technique for defining interconnected sub-populations of cultured neurons on microelectrode arrays (MEAs). An automated microdrop delivery technique allows to design and realize spatially distributed neuronal ensembles by depositing sub-nanoliter volumes of adhesion molecules in which neurons grow and develop. Electrophysiological tests demonstrate that functionally interconnected clusters are obtained and experimental results (both spontaneous and stimulus evoked activity recordings) attesting the feasibility of the proposed approach are presented. By means of the automated system, different and specific architectures can be easily designed and functionally studied. In the presented system the speed of drop deposition is about 30 drops/min; the mean diameter is 147 microm; typical cell survival time is 4-5 weeks. By changing drop size and spacing, investigations about how the network dynamics is related to the network structure can be systematically carried out.

Epoxy-silane linking of biomolecules is simple and effective for patterning neuronal cultures

Surface chemistry is one of the main factors that contributes to the longevity and compliance of cell patterning. Two to three weeks are required for dissociated, embryonic rat neuronal cultures to mature to the point that they regularly produce spontaneous and evoked responses. Though proper surface chemistry can be achieved through the use of covalent protein attachment, often it is not maintainable for the time periods necessary to study neuronal growth. Here we report a new and effective covalent linking approach using (3-glycidoxypropyl) trimethoxysilane (3-GPS) for creating long term neuronal patterns. Micrometer scale patterns of cell adhesive proteins were formed using microstamping; hippocampal neurons, cultured up to 1 month, followed those patterns. Cells did not grow on unmodified 3-GPS surfaces, producing non-permissive regions for the long-term cell patterning. Patterned neuronal networks were formed on two different types of MEA (polyimide or silicon nitride insulation) and maintained for 3 weeks. Even though the 3-GPS layer increased the impedance of metal electrodes by a factor of 2-3, final impedance levels were low enough that low noise extracellular recordings were achievable. Spontaneous neural activity was recorded as early as 10 days in vitro. Neural recording and stimulation were readily achieved from these networks. Our results showed that 3-GPS could be used on surfaces to immobilize biomolecules for a variety of neural engineering applications.

Combined topographical and chemical micropatterns for templating neuronal networks

In vitro neuronal networks with geometrically defined features are desirable for studying long-term electrical activity within the neuron assembly and for interfacing with external microelectronic circuits. In standard cultures, the random spatial distribution and overlap of neurites makes this aim difficult; hence, many recent efforts have been made on creating patterned cellular circuits. Here, we present a novel method for creating a planar neural network that is compatible with optical devices. This method combines both topographical and chemical micropatterns onto which neurons can be cultured. Compared to other reported patterning techniques, our approach and choice of template appears to show both geometrical control over the formation of specific neurite connections at low plating density and compatibility with microelectronic circuits that stimulate and record neural activity.

Low-density neuronal networks cultured using patterned poly-l-lysine on microelectrode arrays

Synaptic activity recorded from low-density networks of cultured rat hippocampal neurons was monitored using microelectrode arrays (MEAs). Neuronal networks were patterned with poly-l-lysine (PLL) using microcontact printing (microCP). Polydimethysiloxane (PDMS) stamps were fabricated with relief structures resulting in patterns of 2 microm-wide lines for directing process growth and 20 microm-diameter circles for cell soma attachment. These circles were aligned to electrode sites. Different densities of neurons were plated in order to assess the minimal neuron density required for development of an active network. Spontaneous activity was observed at 10-14 days in networks using neuron densities as low as 200 cells/mm(2). Immunocytochemistry demonstrated the distribution of dendrites along the lines and the location of foci of the presynaptic protein, synaptophysin, on neuron somas and dendrites. Scanning electron microscopy demonstrated that single fluorescent tracks contained multiple processes. Evoked responses of selected portions of the networks were produced by stimulation of specific electrode sites. In addition, the neuronal excitability of the network was increased by the bath application of high K(+) (10-12 mM). Application of DNQX, an AMPA antagonist, blocked all spontaneous activity, suggesting that the activity is excitatory and mediated through glutamate receptors.

Neuronal network structuring induces greater neuronal activity through enhanced astroglial development

The confluence of micropatterning, microfabricated multielectrode arrays, and low-density neuronal culture techniques make possible the growth of patterned neuronal circuits overlying multielectrode arrays. Previous studies have shown synaptic interaction within patterned cultures which was more active on average than random cultures. In our present study, we found patterned cultures to have up to five times more astrocytes and three times more neurons than random cultures. In addition, faster development of synapses is also seen in patterned cultures. Together, this yielded greater overall neuronal activity as evaluated by the number of active electrodes. Our finding of astrocytic proliferation within serum-free culture is also novel.

Connectivity patterns in neuronal networks of experimentally defined geometry

Experimental control over the position and connectivity pattern of neurons on a surface is of central interest for applications in biotechnology, such as cell-based biosensors and tissue engineering. By restricting neuronal networks to a simple grid pattern, a drastic reduction of network complexity can be achieved relative to networks on homogeneous substrates. Therefore, patterned neuronal networks are also a valuable tool in research on neuronal signal transduction. Microcontact printing has emerged as a simple and efficient method for surface patterning to direct cellular attachment. Although the formation of synaptic contacts in networks of rat cortical cells on such surfaces has been demonstrated, evidence of more complex circuits has been lacking. Triple patch-clamp measurements were performed to analyze connectivity in neuronal networks complying with a grid-shaped micropattern. Cells adhered stringently to the pattern and interconnected to a range of different types of circuits: linear connections, feedback loops, as well as branching and converging pathways. We conclude that in spite of the severe geometric restrictions, a complex repertoire of different connectivity patterns can form along the provided pathways. At the same time, network complexity is kept low enough to allow the study of these patterns at the resolution of single cell-cell contacts.

Robust micromechanical neurite elicitation in synapse-competent neurons via magnetic bead force application

The ability to engineer living networks of interconnected neurons with specified connectivity would facilitate the study of synaptogenesis and information processing in the nervous system. Previously, we found that a neurite can be elicited from embryonic chick forebrain neurons by direct mechanical means using magnetic bead force application (MBFA); however, our previous studies and others focused on young, synapse-incompetent neurons. To address this issue, we tested cultures of embryonic chick forebrain neurons of varying age and found that neurites could be micromechanically elicited via MBFA at all ages tested, which ranged between 7 and 22 embryonic equivalent (EE) days (days in ovo plus days in vitro). The probability of neurite initiation was at least 40% for all ages, with a maximum of approximately 80% after 2-4 days in vitro, and a decrease to approximately 60% by day 10 in vitro. The force required to elicit a neurite was approximately 1500 pN with a minimum of approximately 700 pN at embryonic equivalent day 14. The probability of success was similar for two rates of force application (10 and 500 pN/s). Neurite initiation via micromechanical force is robust with respect to cell age, and micromechanical force can induce neurites in synapse-competent neurons.

Independence of synaptic specificity from neuritic guidance

Neuronal circuits are interconnected with a high degree of specificity. While axonal guidance has been demonstrated to be crucial for the choice of the correct target region, its role in specificity at the level of individual cells remains unclear. Specificity of synapse formation may either result from precise guidance of axonal outgrowth onto the target or depend on a molecular "match" between pre- and postsynapse. To distinguish between these possibilities, an in vitro system was used in which neuritic outgrowth of rat cortical neurons is accurately guided along the narrow pathways of a surface micropattern. The micropattern consisted of a blend of extracellular matrix molecules applied to a cell repellent background of polystyrene by microcontact printing. The system reproduces guidance by attractant and repellent surface cues while no other signals that may influence synapse formation, like gradients of trophic factors or accumulations of signaling molecules, are provided. While the number of contact points between neighboring cells was strongly reduced on patterned substrates due to the geometrical restrictions, frequency of synapse formation was not different from homogeneous cultures. Thus it was unaffected by stringent guidance onto the target cell or by the number of cell-cell contacts. Moreover, a statistically significant enrichment of reciprocal contacts between mixed pairs of excitatory and inhibitory neurons over probabilistic predictions was found, which has similarly been shown by others in dissociated neuronal cultures. Our results indicate that precise axonal guidance is insufficient for target-specific synapse formation and suggest that instead recognition between individual cells is required.

Impact of micropatterned surfaces on neuronal polarity

Experimental control over cellular polarity in a neuronal network is a promising tool to study synapse formation and network behavior. We aimed to exploit a mechanism described by Stenger et al. [J. Neurosci. Methods 82 (1998) 167] to manipulate the direction of axonal versus dendritic outgrowth on a micropattern. The group had used laser ablation to create patterns of aminated silanes for cell attachment on a background of repellent fluorinated silanes. The pattern offered continuous adhesive pathways for axonal and interrupted pathways for dendritic outgrowth. By microcontact printing, we created similar patterns containing continuous and interrupted pathways consisting of extracellular matrix proteins on a background of polystyrene. Neuronal polarity was determined on the functional level through double patch clamp measurements, detecting synapses and their orientation. Although our pattern reproduced the properties that were assumed to be critical for the described effect, namely contrasting pathways of different adhesiveness, we failed to reproduce the above results. It is indicated that other qualities of alternative pathways than mere differences in adhesiveness are required to orient neuronal polarity in vitro. We suggest that the effect observed by Stenger et al. has to be attributed to less universal characteristics of the micropattern, e.g. to the specific chemical groups that were utilized.

Biocompatibility of layer-by-layer self-assembled nanofilm on silicone rubber for neurons

Electrostatic layer-by-layer (LbL) self-assembly, a novel method for ultrathin film coating has been applied to silicone rubber to encourage nerve cell adhesion. The surfaces studied consisted of precursor layers, with alternating cationic poly(ethyleneimine) (PEI) and anionic sodium poly(styrenesulfonate) (PSS) followed by alternating laminin and poly-D-lysine (PDL) layers or fibronectin and PDL layers. Film growth increased linearly with the number of layers. Every fibronectin/PDL and laminin/PDL bilayer was 4.4 and 3.5 nm thick, respectively. All layers were more hydrophilic than the unmodified silicone rubber surface, as determined from contact angle measurements. Of the coatings studied, a PDL layer was the most hydrophilic. A multilayer film with composition [PSS/PEI]3+[fibronectin/PDL]4 or [PSS/PEI]3+[laminin/PDL]4 was highly favorable for neuron adhesion, in contrast to bare silicone rubber substrate. The film coated on silicone rubber is biocompatible for cerebellar neurons with active viability, as shown by lactate dehydrogenase (LDH) assay and fluorescence cellular metabolism observations. These results demonstrate that LbL self-assembly provides an effective approach to apply films with nanometer thickness to silicone rubber. Such only few nanometer thick films are biocompatible with neurons, and may be used to coat devises for long-term implant in the central nervous system.

Biology on a chip: microfabrication for studying the behavior of cultured cells

The ability to culture cells in vitro has revolutionized hypothesis testing in basic cell and molecular biology research and has become a standard methodology in drug screening and toxicology assays. However, the traditional cell culture methodology--consisting essentially of the immersion of a large population of cells in a homogeneous fluid medium--has become increasingly limiting, both from a fundamental point of view (cells in vivo are surrounded by complex spatiotemporal microenvironments) and from a practical perspective (scaling up the number of fluid handling steps and cell manipulations for high-throughput studies in vitro is prohibitively expensive). Microfabrication technologies have enabled researchers to design, with micrometer control, the biochemical composition and topology of the substrate, the medium composition, as well as the type of neighboring cells surrounding the microenvironment of the cell. In addition, microtechnology is conceptually well suited for the development of fast, low-cost in vitro systems that allow for high-throughput culturing and analysis of cells under large numbers of conditions. Here we review a variety of applications of microfabrication in cell culture studies, with an emphasis on the biology of various cell types.

Constrained synaptic connectivity in functional mammalian neuronal networks grown on patterned surfaces

The use of ordered neuronal networks in vitro is a promising approach to study the development and the activity of small neuronal assemblies. However, in previous attempts, sufficient growth control and physiological maturation of neurons could not be achieved. Here we describe an original protocol in which polylysine patterns confine the adhesion of cellular bodies to prescribed spots and the neuritic growth to thin lines. Hippocampal neurons in these networks are maintained healthy in serum free medium up to 5 weeks in vitro. Electrophysiology and immunochemistry show that neurons exhibit mature excitatory and inhibitory synapses and calcium imaging reveals spontaneous activity of neurons in isolated networks. We demonstrate that neurons in these geometrical networks form functional synapses preferentially to their first neighbors. We have, therefore, established a simple and robust protocol to constrain both the location of neuronal cell bodies and their pattern of connectivity. Moreover, the long term maintenance of the geometry and the physiology of the networks raises the possibility of new applications for systematic screening of pharmacological agents and for electronic to neuron devices.

Topographical and physicochemical modification of material surface to enable patterning of living cells

Precise control of the architecture of multiple cells in culture and in vivo via precise engineering of the material surface properties is described as cell patterning. Substrate patterning by control of the surface physicochemical and topographic features enables selective localization and phenotypic and genotypic control of living cells. In culture, control over spatial and temporal dynamics of cells and heterotypic interactions draws inspiration from in vivo embryogenesis and haptotaxis. Patterned arrays of single or multiple cell types in culture serve as model systems for exploration of cell-cell and cell-matrix interactions. More recently, the patterned arrays and assemblies of tissues have found practical applications in the fields of Biosensors and cell-based assays for Drug Discovery. Although the field of cell patterning has its origins early in this century, an improved understanding of cell-substrate interactions and the use of microfabrication techniques borrowed from the microelectronics industry have enabled significant recent progress. This review presents the important early discoveries and emphasizes results of recent state-of-the-art cell patterning methods. The review concludes by illustrating the growing impact of cell patterning in the areas of bioelectronic devices and cell-based assays for drug discovery.

Physiological effects of sustained blockade of excitatory synaptic transmission on spontaneously active developing neuronal networks--an inquiry into the reciprocal linkage between intrinsic biorhythms and neuroplasticity in early ontogeny

Spontaneous bioelectric activity (SBA) taking the form of extracellularly recorded spike trains (SBA) has been quantitatively analyzed in organotypic neonatal rat visual cortex explants at different ages in vitro, and the effects investigated of both short- and long-term pharmacological suppression of glutamatergic synaptic transmission. In the presence of APV, a selective NMDA receptor blocker, 1-2- (but not 3-)week-old cultures recovered their previous SBA levels in a matter of hours, although in imitation of the acute effect of the GABAergic inhibitor picrotoxin (PTX), bursts of action potentials were abnormally short and intense. Cultures treated either overnight or chronically for 1-3 weeks with APV, the AMPA/kainate receptor blocker DNQX, or a combination of the two were found to display very different abnormalities in their firing patterns. NMDA receptor blockade for 3 weeks produced the most severe deviations from control SBA, consisting of greatly prolonged and intensified burst firing with a strong tendency to be broken up into trains of shorter spike clusters. This pattern was most closely approximated by acute GABAergic disinhibition in cultures of the same age, but this latter treatment also differed in several respects from the chronic-APV effect. In 2-week-old explants, in contrast, it was the APV+DNQX treated group which showed the most exaggerated spike bursts. Functional maturation of neocortical networks, therefore, may specifically require NMDA receptor activation (not merely a high level of neuronal firing) which initially is driven by endogenous rather than afferent evoked bioelectric activity. Putative cellular mechanisms are discussed in the context of a thorough review of the extensive but scattered literature relating activity-dependent brain development to spontaneous neuronal firing patterns.

Microengineering of cellular interactions

Tissue function is modulated by an intricate architecture of cells and biomolecules on a micrometer scale. Until now, in vitro cellular interactions were mainly studied by random seeding over homogeneous substrates. Although this strategy has led to important discoveries, it is clearly a nonoptimal analog of the in vivo scenario. With the incorporation--and adaptation--of microfabrication technology into biology, it is now possible to design surfaces that reproduce some of the aspects of that architecture. This article reviews past research on the engineering of cell-substrate, cell-cell, and cell-medium interactions on the micrometer scale.

Modulation of neural network activity by patterning

Using neuronal cultures on microelectrode arrays, researchers have shown that recordable electrical activity can be influenced by chemicals in the culture environment, thus demonstrating potential applicability to biosensors or drug screening. Since practical success requires the design of robust networks with repeatable, reliable responses understanding the sources of variation is important. In this report, we used lithographic technologies to confine neurons to highly defined patterns (40 microm wide stripes); in turn these patterns gave us a measure of control over the local density of neurons (100-500 cells/mm(2)). We found that the apparent electrical activity of the network, as measured by the fraction of electrodes from which signals were recordable, increases 8-10-fold with greater local density. Also, average-firing rates of the active neurons increased 3-5-fold. We conclude that patterned networks offer one means of controlling and enhancing the responsiveness of cultured neural networks.

Long-term stability of grafted polyethylene glycol surfaces for use with microstamped substrates in neuronal cell culture

Crucial to long-term stability of neuronal micropatterns is functional retention of the underlying substratum while exposed to cell culture conditions. We report on the ability of covalently bound PEG films in long-term cell culture to continually retard protein adhesion and cell growth. PDMS microstamps were used to create poly-d-lysine (PDL) substrates permissive to cell attachment and growth, and polyethylene glycol (PEG) substrates were used to minimize protein and cell adhesion. Film thickness was measured using null ellipsometry and atomic force microscopy (AFM). Organosilane film structure was examined using Fourier transform infrared (FT-IR) spectroscopy. Long-term film stability in cell culture conditions was tested by immersion in 0.1 M sodium phosphate buffer pH 7.4 for up to one month. Null ellipsometry and water contact measurements indicated that organosilane films were stable up to one month, whereas the PEG film thickness declined rapidly after day 25. Hippocampal cells plated at 200 cells/mm2 on uniform PEG substrates gave a steady increase in biofilm thickness on PEG films throughout the culture, possibly from proteins of neuronal origin. We found that all the layers in the cross-linking procedure were stable in cell culture conditions, with the exception of PEG, which degraded after day 25.

Synaptic connectivity in hippocampal neuronal networks cultured on micropatterned surfaces

Embryonic rat hippocampal neurons were grown on patterned silane surface in order to organize synapse formations in a controlled manner. The surface patterns were composed of trimethoxysilylpropyl-diethylenetriamine (DETA) lines separated by tridecafluoro-1,1,2,2-tetrahydrooctyl-1-dimethylchlorosilane (13F) spaces. Pre- and post-synaptic specializations were identified by immunostaining for synapsin I and microtubule-associated protein-2 (MAP-2). Functional synaptic connections were examined by recording simultaneously from pairs of neurons using the whole-cell configuration of the patch-clamp technique. Spontaneous and evoked synaptic currents were recorded in neurons cultured for 2-14 days. The formation of functional connections was accompanied by the appearance of spontaneous synaptic currents (SSCs), which could be detected after approximately 3 days in culture in the absence of evoked synaptic currents (ESCs). ESCs were detected only after approximately 7 days in culture, mostly in the form of unidirectional synaptic connections. Other forms of synaptic connectivity, such as bidirectional and autaptic connections, were also identified. Both transient GABAergic and glutamatergic signals mediated the transmissions between communicating cells. These results demonstrate the combination of various types of synaptic connections forming simple and complex networks in neurons cultured on line (DETA)-space (13F) patterns. Finally, precisely synchronized SSCs were recorded in neuron pairs cultured on pattern indicating the existence of a fast-acting feedback mechanism mediated by pre-synaptic GABA(A) receptors.

Relationship between large conductance calcium-activated potassium channel and bursting activity

To elucidate the role of the large conductance calcium-activated potassium channel (BK(Ca) channel) in the production of bursting activity, which is characteristic of convulsions, effects of iberiotoxin (IbTX), a selective blocker of the BK(Ca) channel, on bursting activity, induced by various procedures were examined using primary cultured neurons from the cerebral cortex of mice. IbTX completely inhibited bursting activity induced by pentylenetetrazol (PTZ), caffeine, 1,4,5-inositol triphosphate (IP3) and direct forced increase of intracellular calcium. Inherent spontaneous bursting activity in the cerebral cortical neurons of the El mouse, which shows a high susceptibility to convulsions was also completely inhibited by IbTX. Apamin, a specific blocker of the small conductance calcium-activated potassium channel (SK(Ca) channel) showed no inhibition of bursting activity. These findings suggest that the BK(Ca) channel is essential for the production of bursting activity, and also suggest the possibility of clinical use of blocking agents of the BK(Ca) channel against intractable epilepsy.

Formation of hippocampal synapses on patterned substrates of a laminin-derived synthetic peptide

We created a new culture system which provides simple, stereotyped neuronal circuitries suitable for investigating synaptic events between mammalian central neurons. We used surface chemistry and laser-lithography to produce geometrical patterns of neuron-compatible substrate spaced by less neuron-compatible surfaces. The patterned substrates were composed of a laminin-derived synthetic peptide, PA22-2, and the spacing surfaces of either decyldimethylsilane (DDMS) or trimethylsilane (TMS). Dissociated rat hippocampal neurons survived on the patterned substrates for several days without the aid of glia and extended their neurites along the substrates. The TMS spacing surfaces appeared more favourable for the excitability development and axonal differentiation of the hippocampal neurons, but less favourable for the development of the resting conductance than the DDMS spacing surfaces. Furthermore, neurons grown on the patterned substrates frequently made synaptophysin-positive contacts with one another. Spontaneous post-synaptic currents recorded from such neurons suggest that these contacts were indeed functional synapses. When hippocampal neurons were plated at a very low density, they often formed circuitries consisting of only two neurons on the patterned substrate. Such a simple circuitry allowed us to analyse synaptic transmission in a single neuronal pair without the influence of the third neurons. With the clarity of analysis and the readiness of manipulation, our culture system would offer a powerful tool for studying development and functions of mammalian central synapses.

Long-term maintenance of patterns of hippocampal pyramidal cells on substrates of polyethylene glycol and microstamped polylysine

For neurons to attach and remain in precise micropatterns for weeks in culture, background molecules that remain nonpermissive for extended culture durations need to be identified. Nonpermissive background molecules of either polyethylene glycol (PEG) or the amino acid serine (C3H7NO3) were evaluated. The foreground regions were microstamped with 3-, 5-, or 10-micron lines of poly-D-lysine (PDL), which promotes neural attachment and growth. After 29 days in culture the foreground compliance, or the fraction of all live somata which rested on the desired PDL surface, averaged 86% for serine and 90% for PEG, with only a small decline. The background compliance, or the fraction of square areas in the pattern background which were free of neurite extension, declined from highs of 40% and 55% (midculture) to 5.5% and 12% (29 days) for serine and PEG, respectively. Images of the cultures suggest that PEG is significantly more effective as a nonpermissive substrate. We conclude that these materials, especially PEG, are adequate for the maintenance of long-term patterned cultures of neurons. We believe that this is the first report of high-quality long-term patterning of cultured neurons.